blob: 162a520f4bd6a5627a8927d56d52ea6daaba9baf [file] [log] [blame]
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +02001/*
2 * max6650.c - Part of lm_sensors, Linux kernel modules for hardware
3 * monitoring.
4 *
Hans J. Koch2aa25c22010-11-15 21:38:56 +01005 * (C) 2007 by Hans J. Koch <hjk@hansjkoch.de>
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +02006 *
7 * based on code written by John Morris <john.morris@spirentcom.com>
8 * Copyright (c) 2003 Spirent Communications
9 * and Claus Gindhart <claus.gindhart@kontron.com>
10 *
11 * This module has only been tested with the MAX6650 chip. It should
12 * also work with the MAX6651. It does not distinguish max6650 and max6651
13 * chips.
14 *
Christian Engelmayer52b52262009-06-15 18:39:52 +020015 * The datasheet was last seen at:
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +020016 *
17 * http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
18 *
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
23 *
24 * This program is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
28 *
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
32 */
33
34#include <linux/module.h>
35#include <linux/init.h>
36#include <linux/slab.h>
37#include <linux/jiffies.h>
38#include <linux/i2c.h>
39#include <linux/hwmon.h>
40#include <linux/hwmon-sysfs.h>
41#include <linux/err.h>
42
43/*
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +020044 * Insmod parameters
45 */
46
47/* fan_voltage: 5=5V fan, 12=12V fan, 0=don't change */
48static int fan_voltage;
49/* prescaler: Possible values are 1, 2, 4, 8, 16 or 0 for don't change */
50static int prescaler;
51/* clock: The clock frequency of the chip the driver should assume */
52static int clock = 254000;
53
54module_param(fan_voltage, int, S_IRUGO);
55module_param(prescaler, int, S_IRUGO);
56module_param(clock, int, S_IRUGO);
57
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +020058/*
59 * MAX 6650/6651 registers
60 */
61
62#define MAX6650_REG_SPEED 0x00
63#define MAX6650_REG_CONFIG 0x02
64#define MAX6650_REG_GPIO_DEF 0x04
65#define MAX6650_REG_DAC 0x06
66#define MAX6650_REG_ALARM_EN 0x08
67#define MAX6650_REG_ALARM 0x0A
68#define MAX6650_REG_TACH0 0x0C
69#define MAX6650_REG_TACH1 0x0E
70#define MAX6650_REG_TACH2 0x10
71#define MAX6650_REG_TACH3 0x12
72#define MAX6650_REG_GPIO_STAT 0x14
73#define MAX6650_REG_COUNT 0x16
74
75/*
76 * Config register bits
77 */
78
79#define MAX6650_CFG_V12 0x08
80#define MAX6650_CFG_PRESCALER_MASK 0x07
81#define MAX6650_CFG_PRESCALER_2 0x01
82#define MAX6650_CFG_PRESCALER_4 0x02
83#define MAX6650_CFG_PRESCALER_8 0x03
84#define MAX6650_CFG_PRESCALER_16 0x04
85#define MAX6650_CFG_MODE_MASK 0x30
86#define MAX6650_CFG_MODE_ON 0x00
87#define MAX6650_CFG_MODE_OFF 0x10
88#define MAX6650_CFG_MODE_CLOSED_LOOP 0x20
89#define MAX6650_CFG_MODE_OPEN_LOOP 0x30
90#define MAX6650_COUNT_MASK 0x03
91
Christian Engelmayer52b52262009-06-15 18:39:52 +020092/*
93 * Alarm status register bits
94 */
95
96#define MAX6650_ALRM_MAX 0x01
97#define MAX6650_ALRM_MIN 0x02
98#define MAX6650_ALRM_TACH 0x04
99#define MAX6650_ALRM_GPIO1 0x08
100#define MAX6650_ALRM_GPIO2 0x10
101
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200102/* Minimum and maximum values of the FAN-RPM */
103#define FAN_RPM_MIN 240
104#define FAN_RPM_MAX 30000
105
106#define DIV_FROM_REG(reg) (1 << (reg & 7))
107
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200108/*
109 * Client data (each client gets its own)
110 */
111
Guenter Roeckbafda5d02012-01-14 21:32:21 -0800112struct max6650_data {
Guenter Roeck17eaa252014-02-11 22:37:01 -0800113 struct i2c_client *client;
114 const struct attribute_group *groups[3];
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200115 struct mutex update_lock;
Jean Delvare9c084da2011-05-25 20:43:32 +0200116 int nr_fans;
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200117 char valid; /* zero until following fields are valid */
118 unsigned long last_updated; /* in jiffies */
119
120 /* register values */
121 u8 speed;
122 u8 config;
123 u8 tach[4];
124 u8 count;
125 u8 dac;
Christian Engelmayer52b52262009-06-15 18:39:52 +0200126 u8 alarm;
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200127};
128
Guenter Roeck1577f942014-02-11 22:26:12 -0800129static const u8 tach_reg[] = {
130 MAX6650_REG_TACH0,
131 MAX6650_REG_TACH1,
132 MAX6650_REG_TACH2,
133 MAX6650_REG_TACH3,
134};
135
136static struct max6650_data *max6650_update_device(struct device *dev)
137{
Guenter Roeck17eaa252014-02-11 22:37:01 -0800138 struct max6650_data *data = dev_get_drvdata(dev);
139 struct i2c_client *client = data->client;
Guenter Roeck1577f942014-02-11 22:26:12 -0800140 int i;
Guenter Roeck1577f942014-02-11 22:26:12 -0800141
142 mutex_lock(&data->update_lock);
143
144 if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
145 data->speed = i2c_smbus_read_byte_data(client,
146 MAX6650_REG_SPEED);
147 data->config = i2c_smbus_read_byte_data(client,
148 MAX6650_REG_CONFIG);
149 for (i = 0; i < data->nr_fans; i++) {
150 data->tach[i] = i2c_smbus_read_byte_data(client,
151 tach_reg[i]);
152 }
153 data->count = i2c_smbus_read_byte_data(client,
154 MAX6650_REG_COUNT);
155 data->dac = i2c_smbus_read_byte_data(client, MAX6650_REG_DAC);
156
157 /*
158 * Alarms are cleared on read in case the condition that
159 * caused the alarm is removed. Keep the value latched here
160 * for providing the register through different alarm files.
161 */
162 data->alarm |= i2c_smbus_read_byte_data(client,
163 MAX6650_REG_ALARM);
164
165 data->last_updated = jiffies;
166 data->valid = 1;
167 }
168
169 mutex_unlock(&data->update_lock);
170
171 return data;
172}
173
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200174static ssize_t get_fan(struct device *dev, struct device_attribute *devattr,
175 char *buf)
176{
177 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
178 struct max6650_data *data = max6650_update_device(dev);
179 int rpm;
180
181 /*
Guenter Roeck703af9602012-01-19 11:02:22 -0800182 * Calculation details:
183 *
184 * Each tachometer counts over an interval given by the "count"
185 * register (0.25, 0.5, 1 or 2 seconds). This module assumes
186 * that the fans produce two pulses per revolution (this seems
187 * to be the most common).
188 */
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200189
190 rpm = ((data->tach[attr->index] * 120) / DIV_FROM_REG(data->count));
191 return sprintf(buf, "%d\n", rpm);
192}
193
194/*
195 * Set the fan speed to the specified RPM (or read back the RPM setting).
196 * This works in closed loop mode only. Use pwm1 for open loop speed setting.
197 *
198 * The MAX6650/1 will automatically control fan speed when in closed loop
199 * mode.
200 *
201 * Assumptions:
202 *
203 * 1) The MAX6650/1 internal 254kHz clock frequency is set correctly. Use
204 * the clock module parameter if you need to fine tune this.
205 *
206 * 2) The prescaler (low three bits of the config register) has already
207 * been set to an appropriate value. Use the prescaler module parameter
208 * if your BIOS doesn't initialize the chip properly.
209 *
210 * The relevant equations are given on pages 21 and 22 of the datasheet.
211 *
212 * From the datasheet, the relevant equation when in regulation is:
213 *
214 * [fCLK / (128 x (KTACH + 1))] = 2 x FanSpeed / KSCALE
215 *
216 * where:
217 *
218 * fCLK is the oscillator frequency (either the 254kHz internal
219 * oscillator or the externally applied clock)
220 *
221 * KTACH is the value in the speed register
222 *
223 * FanSpeed is the speed of the fan in rps
224 *
225 * KSCALE is the prescaler value (1, 2, 4, 8, or 16)
226 *
227 * When reading, we need to solve for FanSpeed. When writing, we need to
228 * solve for KTACH.
229 *
230 * Note: this tachometer is completely separate from the tachometers
231 * used to measure the fan speeds. Only one fan's speed (fan1) is
232 * controlled.
233 */
234
235static ssize_t get_target(struct device *dev, struct device_attribute *devattr,
236 char *buf)
237{
238 struct max6650_data *data = max6650_update_device(dev);
239 int kscale, ktach, rpm;
240
241 /*
Guenter Roeck703af9602012-01-19 11:02:22 -0800242 * Use the datasheet equation:
243 *
244 * FanSpeed = KSCALE x fCLK / [256 x (KTACH + 1)]
245 *
246 * then multiply by 60 to give rpm.
247 */
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200248
249 kscale = DIV_FROM_REG(data->config);
250 ktach = data->speed;
251 rpm = 60 * kscale * clock / (256 * (ktach + 1));
252 return sprintf(buf, "%d\n", rpm);
253}
254
255static ssize_t set_target(struct device *dev, struct device_attribute *devattr,
256 const char *buf, size_t count)
257{
Guenter Roeck17eaa252014-02-11 22:37:01 -0800258 struct max6650_data *data = dev_get_drvdata(dev);
259 struct i2c_client *client = data->client;
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200260 int kscale, ktach;
Guenter Roeckbafda5d02012-01-14 21:32:21 -0800261 unsigned long rpm;
262 int err;
263
264 err = kstrtoul(buf, 10, &rpm);
265 if (err)
266 return err;
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200267
Guenter Roeck2a844c12013-01-09 08:09:34 -0800268 rpm = clamp_val(rpm, FAN_RPM_MIN, FAN_RPM_MAX);
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200269
270 /*
Guenter Roeck703af9602012-01-19 11:02:22 -0800271 * Divide the required speed by 60 to get from rpm to rps, then
272 * use the datasheet equation:
273 *
274 * KTACH = [(fCLK x KSCALE) / (256 x FanSpeed)] - 1
275 */
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200276
277 mutex_lock(&data->update_lock);
278
279 kscale = DIV_FROM_REG(data->config);
280 ktach = ((clock * kscale) / (256 * rpm / 60)) - 1;
281 if (ktach < 0)
282 ktach = 0;
283 if (ktach > 255)
284 ktach = 255;
285 data->speed = ktach;
286
287 i2c_smbus_write_byte_data(client, MAX6650_REG_SPEED, data->speed);
288
289 mutex_unlock(&data->update_lock);
290
291 return count;
292}
293
294/*
295 * Get/set the fan speed in open loop mode using pwm1 sysfs file.
296 * Speed is given as a relative value from 0 to 255, where 255 is maximum
297 * speed. Note that this is done by writing directly to the chip's DAC,
298 * it won't change the closed loop speed set by fan1_target.
299 * Also note that due to rounding errors it is possible that you don't read
300 * back exactly the value you have set.
301 */
302
303static ssize_t get_pwm(struct device *dev, struct device_attribute *devattr,
304 char *buf)
305{
306 int pwm;
307 struct max6650_data *data = max6650_update_device(dev);
308
Guenter Roeck703af9602012-01-19 11:02:22 -0800309 /*
310 * Useful range for dac is 0-180 for 12V fans and 0-76 for 5V fans.
311 * Lower DAC values mean higher speeds.
312 */
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200313 if (data->config & MAX6650_CFG_V12)
314 pwm = 255 - (255 * (int)data->dac)/180;
315 else
316 pwm = 255 - (255 * (int)data->dac)/76;
317
318 if (pwm < 0)
319 pwm = 0;
320
321 return sprintf(buf, "%d\n", pwm);
322}
323
324static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
325 const char *buf, size_t count)
326{
Guenter Roeck17eaa252014-02-11 22:37:01 -0800327 struct max6650_data *data = dev_get_drvdata(dev);
328 struct i2c_client *client = data->client;
Guenter Roeckbafda5d02012-01-14 21:32:21 -0800329 unsigned long pwm;
330 int err;
331
332 err = kstrtoul(buf, 10, &pwm);
333 if (err)
334 return err;
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200335
Guenter Roeck2a844c12013-01-09 08:09:34 -0800336 pwm = clamp_val(pwm, 0, 255);
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200337
338 mutex_lock(&data->update_lock);
339
340 if (data->config & MAX6650_CFG_V12)
341 data->dac = 180 - (180 * pwm)/255;
342 else
343 data->dac = 76 - (76 * pwm)/255;
344
345 i2c_smbus_write_byte_data(client, MAX6650_REG_DAC, data->dac);
346
347 mutex_unlock(&data->update_lock);
348
349 return count;
350}
351
352/*
353 * Get/Set controller mode:
354 * Possible values:
355 * 0 = Fan always on
356 * 1 = Open loop, Voltage is set according to speed, not regulated.
357 * 2 = Closed loop, RPM for all fans regulated by fan1 tachometer
358 */
359
360static ssize_t get_enable(struct device *dev, struct device_attribute *devattr,
361 char *buf)
362{
363 struct max6650_data *data = max6650_update_device(dev);
364 int mode = (data->config & MAX6650_CFG_MODE_MASK) >> 4;
365 int sysfs_modes[4] = {0, 1, 2, 1};
366
367 return sprintf(buf, "%d\n", sysfs_modes[mode]);
368}
369
370static ssize_t set_enable(struct device *dev, struct device_attribute *devattr,
371 const char *buf, size_t count)
372{
Guenter Roeck17eaa252014-02-11 22:37:01 -0800373 struct max6650_data *data = dev_get_drvdata(dev);
374 struct i2c_client *client = data->client;
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200375 int max6650_modes[3] = {0, 3, 2};
Guenter Roeckbafda5d02012-01-14 21:32:21 -0800376 unsigned long mode;
377 int err;
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200378
Guenter Roeckbafda5d02012-01-14 21:32:21 -0800379 err = kstrtoul(buf, 10, &mode);
380 if (err)
381 return err;
382
383 if (mode > 2)
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200384 return -EINVAL;
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200385
386 mutex_lock(&data->update_lock);
387
388 data->config = i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG);
389 data->config = (data->config & ~MAX6650_CFG_MODE_MASK)
390 | (max6650_modes[mode] << 4);
391
392 i2c_smbus_write_byte_data(client, MAX6650_REG_CONFIG, data->config);
393
394 mutex_unlock(&data->update_lock);
395
396 return count;
397}
398
399/*
400 * Read/write functions for fan1_div sysfs file. The MAX6650 has no such
401 * divider. We handle this by converting between divider and counttime:
402 *
403 * (counttime == k) <==> (divider == 2^k), k = 0, 1, 2, or 3
404 *
405 * Lower values of k allow to connect a faster fan without the risk of
406 * counter overflow. The price is lower resolution. You can also set counttime
407 * using the module parameter. Note that the module parameter "prescaler" also
408 * influences the behaviour. Unfortunately, there's no sysfs attribute
409 * defined for that. See the data sheet for details.
410 */
411
412static ssize_t get_div(struct device *dev, struct device_attribute *devattr,
413 char *buf)
414{
415 struct max6650_data *data = max6650_update_device(dev);
416
417 return sprintf(buf, "%d\n", DIV_FROM_REG(data->count));
418}
419
420static ssize_t set_div(struct device *dev, struct device_attribute *devattr,
421 const char *buf, size_t count)
422{
Guenter Roeck17eaa252014-02-11 22:37:01 -0800423 struct max6650_data *data = dev_get_drvdata(dev);
424 struct i2c_client *client = data->client;
Guenter Roeckbafda5d02012-01-14 21:32:21 -0800425 unsigned long div;
426 int err;
427
428 err = kstrtoul(buf, 10, &div);
429 if (err)
430 return err;
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200431
432 mutex_lock(&data->update_lock);
433 switch (div) {
434 case 1:
435 data->count = 0;
436 break;
437 case 2:
438 data->count = 1;
439 break;
440 case 4:
441 data->count = 2;
442 break;
443 case 8:
444 data->count = 3;
445 break;
446 default:
Jiri Slaby025dc742009-07-11 13:42:37 +0200447 mutex_unlock(&data->update_lock);
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200448 return -EINVAL;
449 }
450
451 i2c_smbus_write_byte_data(client, MAX6650_REG_COUNT, data->count);
452 mutex_unlock(&data->update_lock);
453
454 return count;
455}
456
Christian Engelmayer52b52262009-06-15 18:39:52 +0200457/*
458 * Get alarm stati:
459 * Possible values:
460 * 0 = no alarm
461 * 1 = alarm
462 */
463
464static ssize_t get_alarm(struct device *dev, struct device_attribute *devattr,
465 char *buf)
466{
467 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
468 struct max6650_data *data = max6650_update_device(dev);
Guenter Roeck17eaa252014-02-11 22:37:01 -0800469 struct i2c_client *client = data->client;
Christian Engelmayer52b52262009-06-15 18:39:52 +0200470 int alarm = 0;
471
472 if (data->alarm & attr->index) {
473 mutex_lock(&data->update_lock);
474 alarm = 1;
475 data->alarm &= ~attr->index;
476 data->alarm |= i2c_smbus_read_byte_data(client,
477 MAX6650_REG_ALARM);
478 mutex_unlock(&data->update_lock);
479 }
480
481 return sprintf(buf, "%d\n", alarm);
482}
483
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200484static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, 0);
485static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, get_fan, NULL, 1);
486static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, get_fan, NULL, 2);
487static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, get_fan, NULL, 3);
488static DEVICE_ATTR(fan1_target, S_IWUSR | S_IRUGO, get_target, set_target);
489static DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, get_div, set_div);
490static DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, get_enable, set_enable);
491static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm, set_pwm);
Christian Engelmayer52b52262009-06-15 18:39:52 +0200492static SENSOR_DEVICE_ATTR(fan1_max_alarm, S_IRUGO, get_alarm, NULL,
493 MAX6650_ALRM_MAX);
494static SENSOR_DEVICE_ATTR(fan1_min_alarm, S_IRUGO, get_alarm, NULL,
495 MAX6650_ALRM_MIN);
496static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_alarm, NULL,
497 MAX6650_ALRM_TACH);
498static SENSOR_DEVICE_ATTR(gpio1_alarm, S_IRUGO, get_alarm, NULL,
499 MAX6650_ALRM_GPIO1);
500static SENSOR_DEVICE_ATTR(gpio2_alarm, S_IRUGO, get_alarm, NULL,
501 MAX6650_ALRM_GPIO2);
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200502
Al Viro587a1f12011-07-23 23:11:19 -0400503static umode_t max6650_attrs_visible(struct kobject *kobj, struct attribute *a,
Christian Engelmayer52b52262009-06-15 18:39:52 +0200504 int n)
505{
506 struct device *dev = container_of(kobj, struct device, kobj);
Guenter Roeck17eaa252014-02-11 22:37:01 -0800507 struct max6650_data *data = dev_get_drvdata(dev);
508 struct i2c_client *client = data->client;
Christian Engelmayer52b52262009-06-15 18:39:52 +0200509 u8 alarm_en = i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM_EN);
510 struct device_attribute *devattr;
511
512 /*
513 * Hide the alarms that have not been enabled by the firmware
514 */
515
516 devattr = container_of(a, struct device_attribute, attr);
517 if (devattr == &sensor_dev_attr_fan1_max_alarm.dev_attr
518 || devattr == &sensor_dev_attr_fan1_min_alarm.dev_attr
519 || devattr == &sensor_dev_attr_fan1_fault.dev_attr
520 || devattr == &sensor_dev_attr_gpio1_alarm.dev_attr
521 || devattr == &sensor_dev_attr_gpio2_alarm.dev_attr) {
522 if (!(alarm_en & to_sensor_dev_attr(devattr)->index))
523 return 0;
524 }
525
526 return a->mode;
527}
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200528
529static struct attribute *max6650_attrs[] = {
530 &sensor_dev_attr_fan1_input.dev_attr.attr,
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200531 &dev_attr_fan1_target.attr,
532 &dev_attr_fan1_div.attr,
533 &dev_attr_pwm1_enable.attr,
534 &dev_attr_pwm1.attr,
Christian Engelmayer52b52262009-06-15 18:39:52 +0200535 &sensor_dev_attr_fan1_max_alarm.dev_attr.attr,
536 &sensor_dev_attr_fan1_min_alarm.dev_attr.attr,
537 &sensor_dev_attr_fan1_fault.dev_attr.attr,
538 &sensor_dev_attr_gpio1_alarm.dev_attr.attr,
539 &sensor_dev_attr_gpio2_alarm.dev_attr.attr,
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200540 NULL
541};
542
Guenter Roeck17eaa252014-02-11 22:37:01 -0800543static const struct attribute_group max6650_group = {
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200544 .attrs = max6650_attrs,
Christian Engelmayer52b52262009-06-15 18:39:52 +0200545 .is_visible = max6650_attrs_visible,
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200546};
547
Jean Delvare9c084da2011-05-25 20:43:32 +0200548static struct attribute *max6651_attrs[] = {
549 &sensor_dev_attr_fan2_input.dev_attr.attr,
550 &sensor_dev_attr_fan3_input.dev_attr.attr,
551 &sensor_dev_attr_fan4_input.dev_attr.attr,
552 NULL
553};
554
Guenter Roeck17eaa252014-02-11 22:37:01 -0800555static const struct attribute_group max6651_group = {
Jean Delvare9c084da2011-05-25 20:43:32 +0200556 .attrs = max6651_attrs,
557};
558
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200559/*
560 * Real code
561 */
562
Guenter Roeck17eaa252014-02-11 22:37:01 -0800563static int max6650_init_client(struct max6650_data *data,
564 struct i2c_client *client)
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200565{
Guenter Roeck71ba0f32014-02-11 22:43:54 -0800566 struct device *dev = &client->dev;
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200567 int config;
568 int err = -EIO;
569
570 config = i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG);
571
572 if (config < 0) {
Guenter Roeck71ba0f32014-02-11 22:43:54 -0800573 dev_err(dev, "Error reading config, aborting.\n");
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200574 return err;
575 }
576
577 switch (fan_voltage) {
Guenter Roeckbafda5d02012-01-14 21:32:21 -0800578 case 0:
579 break;
580 case 5:
581 config &= ~MAX6650_CFG_V12;
582 break;
583 case 12:
584 config |= MAX6650_CFG_V12;
585 break;
586 default:
Guenter Roeck71ba0f32014-02-11 22:43:54 -0800587 dev_err(dev, "illegal value for fan_voltage (%d)\n",
Guenter Roeckbafda5d02012-01-14 21:32:21 -0800588 fan_voltage);
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200589 }
590
Guenter Roeck71ba0f32014-02-11 22:43:54 -0800591 dev_info(dev, "Fan voltage is set to %dV.\n",
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200592 (config & MAX6650_CFG_V12) ? 12 : 5);
593
594 switch (prescaler) {
Guenter Roeckbafda5d02012-01-14 21:32:21 -0800595 case 0:
596 break;
597 case 1:
598 config &= ~MAX6650_CFG_PRESCALER_MASK;
599 break;
600 case 2:
601 config = (config & ~MAX6650_CFG_PRESCALER_MASK)
602 | MAX6650_CFG_PRESCALER_2;
603 break;
604 case 4:
605 config = (config & ~MAX6650_CFG_PRESCALER_MASK)
606 | MAX6650_CFG_PRESCALER_4;
607 break;
608 case 8:
609 config = (config & ~MAX6650_CFG_PRESCALER_MASK)
610 | MAX6650_CFG_PRESCALER_8;
611 break;
612 case 16:
613 config = (config & ~MAX6650_CFG_PRESCALER_MASK)
614 | MAX6650_CFG_PRESCALER_16;
615 break;
616 default:
Guenter Roeck71ba0f32014-02-11 22:43:54 -0800617 dev_err(dev, "illegal value for prescaler (%d)\n", prescaler);
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200618 }
619
Guenter Roeck71ba0f32014-02-11 22:43:54 -0800620 dev_info(dev, "Prescaler is set to %d.\n",
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200621 1 << (config & MAX6650_CFG_PRESCALER_MASK));
622
Guenter Roeck703af9602012-01-19 11:02:22 -0800623 /*
624 * If mode is set to "full off", we change it to "open loop" and
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200625 * set DAC to 255, which has the same effect. We do this because
LABBE Corentin84fb0292013-09-27 14:36:04 +0200626 * there's no "full off" mode defined in hwmon specifications.
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200627 */
628
629 if ((config & MAX6650_CFG_MODE_MASK) == MAX6650_CFG_MODE_OFF) {
Guenter Roeck71ba0f32014-02-11 22:43:54 -0800630 dev_dbg(dev, "Change mode to open loop, full off.\n");
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200631 config = (config & ~MAX6650_CFG_MODE_MASK)
632 | MAX6650_CFG_MODE_OPEN_LOOP;
633 if (i2c_smbus_write_byte_data(client, MAX6650_REG_DAC, 255)) {
Guenter Roeck71ba0f32014-02-11 22:43:54 -0800634 dev_err(dev, "DAC write error, aborting.\n");
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200635 return err;
636 }
637 }
638
639 if (i2c_smbus_write_byte_data(client, MAX6650_REG_CONFIG, config)) {
Guenter Roeck71ba0f32014-02-11 22:43:54 -0800640 dev_err(dev, "Config write error, aborting.\n");
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200641 return err;
642 }
643
644 data->config = config;
645 data->count = i2c_smbus_read_byte_data(client, MAX6650_REG_COUNT);
646
647 return 0;
648}
649
Guenter Roeck1577f942014-02-11 22:26:12 -0800650static int max6650_probe(struct i2c_client *client,
651 const struct i2c_device_id *id)
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200652{
Guenter Roeck71ba0f32014-02-11 22:43:54 -0800653 struct device *dev = &client->dev;
Guenter Roeck1577f942014-02-11 22:26:12 -0800654 struct max6650_data *data;
Guenter Roeck17eaa252014-02-11 22:37:01 -0800655 struct device *hwmon_dev;
Guenter Roeck1577f942014-02-11 22:26:12 -0800656 int err;
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200657
Guenter Roeck71ba0f32014-02-11 22:43:54 -0800658 data = devm_kzalloc(dev, sizeof(struct max6650_data), GFP_KERNEL);
Guenter Roeck0b5e33b2014-02-11 22:40:33 -0800659 if (!data)
Guenter Roeck1577f942014-02-11 22:26:12 -0800660 return -ENOMEM;
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200661
Guenter Roeck17eaa252014-02-11 22:37:01 -0800662 data->client = client;
Guenter Roeck1577f942014-02-11 22:26:12 -0800663 mutex_init(&data->update_lock);
664 data->nr_fans = id->driver_data;
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200665
Guenter Roeck1577f942014-02-11 22:26:12 -0800666 /*
667 * Initialize the max6650 chip
668 */
Guenter Roeck17eaa252014-02-11 22:37:01 -0800669 err = max6650_init_client(data, client);
Guenter Roeck1577f942014-02-11 22:26:12 -0800670 if (err)
671 return err;
672
Guenter Roeck17eaa252014-02-11 22:37:01 -0800673 data->groups[0] = &max6650_group;
Guenter Roeck1577f942014-02-11 22:26:12 -0800674 /* 3 additional fan inputs for the MAX6651 */
Guenter Roeck1577f942014-02-11 22:26:12 -0800675 if (data->nr_fans == 4)
Guenter Roeck17eaa252014-02-11 22:37:01 -0800676 data->groups[1] = &max6651_group;
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200677
Guenter Roeck71ba0f32014-02-11 22:43:54 -0800678 hwmon_dev = devm_hwmon_device_register_with_groups(dev,
Guenter Roeck17eaa252014-02-11 22:37:01 -0800679 client->name, data,
680 data->groups);
681 return PTR_ERR_OR_ZERO(hwmon_dev);
Guenter Roeck1577f942014-02-11 22:26:12 -0800682}
683
684static const struct i2c_device_id max6650_id[] = {
685 { "max6650", 1 },
686 { "max6651", 4 },
687 { }
688};
689MODULE_DEVICE_TABLE(i2c, max6650_id);
690
691static struct i2c_driver max6650_driver = {
692 .driver = {
693 .name = "max6650",
694 },
695 .probe = max6650_probe,
Guenter Roeck1577f942014-02-11 22:26:12 -0800696 .id_table = max6650_id,
697};
698
Axel Linf0967ee2012-01-20 15:38:18 +0800699module_i2c_driver(max6650_driver);
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200700
701MODULE_AUTHOR("Hans J. Koch");
702MODULE_DESCRIPTION("MAX6650 sensor driver");
703MODULE_LICENSE("GPL");