blob: 834a2aeaf27a8d80b9dd1df110473dcab4ef154b [file] [log] [blame]
Masahiro Yamada4b7f48d2015-12-09 15:52:59 +09001/*
2 * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 */
14
15#include <linux/io.h>
16#include <linux/log2.h>
17#include <linux/module.h>
18#include <linux/of.h>
19#include <linux/of_address.h>
20#include <linux/of_platform.h>
21#include <linux/platform_device.h>
22
23/* System Bus Controller registers */
24#define UNIPHIER_SBC_BASE 0x100 /* base address of bank0 space */
25#define UNIPHIER_SBC_BASE_BE BIT(0) /* bank_enable */
26#define UNIPHIER_SBC_CTRL0 0x200 /* timing parameter 0 of bank0 */
27#define UNIPHIER_SBC_CTRL1 0x204 /* timing parameter 1 of bank0 */
28#define UNIPHIER_SBC_CTRL2 0x208 /* timing parameter 2 of bank0 */
29#define UNIPHIER_SBC_CTRL3 0x20c /* timing parameter 3 of bank0 */
30#define UNIPHIER_SBC_CTRL4 0x300 /* timing parameter 4 of bank0 */
31
32#define UNIPHIER_SBC_STRIDE 0x10 /* register stride to next bank */
33#define UNIPHIER_SBC_NR_BANKS 8 /* number of banks (chip select) */
34#define UNIPHIER_SBC_BASE_DUMMY 0xffffffff /* data to squash bank 0, 1 */
35
36struct uniphier_system_bus_bank {
37 u32 base;
38 u32 end;
39};
40
41struct uniphier_system_bus_priv {
42 struct device *dev;
43 void __iomem *membase;
44 struct uniphier_system_bus_bank bank[UNIPHIER_SBC_NR_BANKS];
45};
46
47static int uniphier_system_bus_add_bank(struct uniphier_system_bus_priv *priv,
48 int bank, u32 addr, u64 paddr, u32 size)
49{
50 u64 end, mask;
51
52 dev_dbg(priv->dev,
53 "range found: bank = %d, addr = %08x, paddr = %08llx, size = %08x\n",
54 bank, addr, paddr, size);
55
56 if (bank >= ARRAY_SIZE(priv->bank)) {
57 dev_err(priv->dev, "unsupported bank number %d\n", bank);
58 return -EINVAL;
59 }
60
61 if (priv->bank[bank].base || priv->bank[bank].end) {
62 dev_err(priv->dev,
63 "range for bank %d has already been specified\n", bank);
64 return -EINVAL;
65 }
66
67 if (paddr > U32_MAX) {
68 dev_err(priv->dev, "base address %llx is too high\n", paddr);
69 return -EINVAL;
70 }
71
72 end = paddr + size;
73
74 if (addr > paddr) {
75 dev_err(priv->dev,
76 "base %08x cannot be mapped to %08llx of parent\n",
77 addr, paddr);
78 return -EINVAL;
79 }
80 paddr -= addr;
81
82 paddr = round_down(paddr, 0x00020000);
83 end = round_up(end, 0x00020000);
84
85 if (end > U32_MAX) {
86 dev_err(priv->dev, "end address %08llx is too high\n", end);
87 return -EINVAL;
88 }
89 mask = paddr ^ (end - 1);
90 mask = roundup_pow_of_two(mask);
91
92 paddr = round_down(paddr, mask);
93 end = round_up(end, mask);
94
95 priv->bank[bank].base = paddr;
96 priv->bank[bank].end = end;
97
98 dev_dbg(priv->dev, "range added: bank = %d, addr = %08x, end = %08x\n",
99 bank, priv->bank[bank].base, priv->bank[bank].end);
100
101 return 0;
102}
103
104static int uniphier_system_bus_check_overlap(
105 const struct uniphier_system_bus_priv *priv)
106{
107 int i, j;
108
109 for (i = 0; i < ARRAY_SIZE(priv->bank); i++) {
110 for (j = i + 1; j < ARRAY_SIZE(priv->bank); j++) {
111 if (priv->bank[i].end > priv->bank[j].base ||
112 priv->bank[i].base < priv->bank[j].end) {
113 dev_err(priv->dev,
114 "region overlap between bank%d and bank%d\n",
115 i, j);
116 return -EINVAL;
117 }
118 }
119 }
120
121 return 0;
122}
123
124static void uniphier_system_bus_check_boot_swap(
125 struct uniphier_system_bus_priv *priv)
126{
127 void __iomem *base_reg = priv->membase + UNIPHIER_SBC_BASE;
128 int is_swapped;
129
130 is_swapped = !(readl(base_reg) & UNIPHIER_SBC_BASE_BE);
131
132 dev_dbg(priv->dev, "Boot Swap: %s\n", is_swapped ? "on" : "off");
133
134 /*
135 * If BOOT_SWAP was asserted on power-on-reset, the CS0 and CS1 are
136 * swapped. In this case, bank0 and bank1 should be swapped as well.
137 */
138 if (is_swapped)
139 swap(priv->bank[0], priv->bank[1]);
140}
141
142static void uniphier_system_bus_set_reg(
143 const struct uniphier_system_bus_priv *priv)
144{
145 void __iomem *base_reg = priv->membase + UNIPHIER_SBC_BASE;
146 u32 base, end, mask, val;
147 int i;
148
149 for (i = 0; i < ARRAY_SIZE(priv->bank); i++) {
150 base = priv->bank[i].base;
151 end = priv->bank[i].end;
152
153 if (base == end) {
154 /*
155 * If SBC_BASE0 or SBC_BASE1 is set to zero, the access
156 * to anywhere in the system bus space is routed to
157 * bank 0 (if boot swap if off) or bank 1 (if boot swap
158 * if on). It means that CPUs cannot get access to
159 * bank 2 or later. In other words, bank 0/1 cannot
160 * be disabled even if its bank_enable bits is cleared.
161 * This seems odd, but it is how this hardware goes.
162 * As a workaround, dummy data (0xffffffff) should be
163 * set when the bank 0/1 is unused. As for bank 2 and
164 * later, they can be simply disable by clearing the
165 * bank_enable bit.
166 */
167 if (i < 2)
168 val = UNIPHIER_SBC_BASE_DUMMY;
169 else
170 val = 0;
171 } else {
172 mask = base ^ (end - 1);
173
174 val = base & 0xfffe0000;
175 val |= (~mask >> 16) & 0xfffe;
176 val |= UNIPHIER_SBC_BASE_BE;
177 }
178 dev_dbg(priv->dev, "SBC_BASE[%d] = 0x%08x\n", i, val);
179
180 writel(val, base_reg + UNIPHIER_SBC_STRIDE * i);
181 }
182}
183
184static int uniphier_system_bus_probe(struct platform_device *pdev)
185{
186 struct device *dev = &pdev->dev;
187 struct uniphier_system_bus_priv *priv;
188 struct resource *regs;
189 const __be32 *ranges;
190 u32 cells, addr, size;
191 u64 paddr;
192 int pna, bank, rlen, rone, ret;
193
194 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
195 if (!priv)
196 return -ENOMEM;
197
198 regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
199 priv->membase = devm_ioremap_resource(dev, regs);
200 if (IS_ERR(priv->membase))
201 return PTR_ERR(priv->membase);
202
203 priv->dev = dev;
204
205 pna = of_n_addr_cells(dev->of_node);
206
207 ret = of_property_read_u32(dev->of_node, "#address-cells", &cells);
208 if (ret) {
209 dev_err(dev, "failed to get #address-cells\n");
210 return ret;
211 }
212 if (cells != 2) {
213 dev_err(dev, "#address-cells must be 2\n");
214 return -EINVAL;
215 }
216
217 ret = of_property_read_u32(dev->of_node, "#size-cells", &cells);
218 if (ret) {
219 dev_err(dev, "failed to get #size-cells\n");
220 return ret;
221 }
222 if (cells != 1) {
223 dev_err(dev, "#size-cells must be 1\n");
224 return -EINVAL;
225 }
226
227 ranges = of_get_property(dev->of_node, "ranges", &rlen);
228 if (!ranges) {
229 dev_err(dev, "failed to get ranges property\n");
230 return -ENOENT;
231 }
232
233 rlen /= sizeof(*ranges);
234 rone = pna + 2;
235
236 for (; rlen >= rone; rlen -= rone) {
237 bank = be32_to_cpup(ranges++);
238 addr = be32_to_cpup(ranges++);
239 paddr = of_translate_address(dev->of_node, ranges);
240 if (paddr == OF_BAD_ADDR)
241 return -EINVAL;
242 ranges += pna;
243 size = be32_to_cpup(ranges++);
244
245 ret = uniphier_system_bus_add_bank(priv, bank, addr,
246 paddr, size);
247 if (ret)
248 return ret;
249 }
250
251 ret = uniphier_system_bus_check_overlap(priv);
252 if (ret)
253 return ret;
254
255 uniphier_system_bus_check_boot_swap(priv);
256
257 uniphier_system_bus_set_reg(priv);
258
259 /* Now, the bus is configured. Populate platform_devices below it */
260 return of_platform_populate(dev->of_node, of_default_bus_match_table,
261 NULL, dev);
262}
263
264static const struct of_device_id uniphier_system_bus_match[] = {
265 { .compatible = "socionext,uniphier-system-bus" },
266 { /* sentinel */ }
267};
268MODULE_DEVICE_TABLE(of, uniphier_system_bus_match);
269
270static struct platform_driver uniphier_system_bus_driver = {
271 .probe = uniphier_system_bus_probe,
272 .driver = {
273 .name = "uniphier-system-bus",
274 .of_match_table = uniphier_system_bus_match,
275 },
276};
277module_platform_driver(uniphier_system_bus_driver);
278
279MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
280MODULE_DESCRIPTION("UniPhier System Bus driver");
281MODULE_LICENSE("GPL");