blob: dc7d78eecb19ce6dd3631e8fcc0393804da359eb [file] [log] [blame]
Mark Langsdorf8996b892012-09-06 16:03:30 -05001/*
2 * Calxeda Highbank AHCI SATA platform driver
3 * Copyright 2012 Calxeda, Inc.
4 *
5 * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms and conditions of the GNU General Public License,
9 * version 2, as published by the Free Software Foundation.
10 *
11 * This program is distributed in the hope it will be useful, but WITHOUT
12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * more details.
15 *
16 * You should have received a copy of the GNU General Public License along with
17 * this program. If not, see <http://www.gnu.org/licenses/>.
18 */
19#include <linux/kernel.h>
20#include <linux/gfp.h>
21#include <linux/module.h>
22#include <linux/init.h>
23#include <linux/types.h>
24#include <linux/err.h>
25#include <linux/io.h>
26#include <linux/spinlock.h>
27#include <linux/device.h>
28#include <linux/of_device.h>
29#include <linux/of_address.h>
30#include <linux/platform_device.h>
31#include <linux/libata.h>
32#include <linux/ahci_platform.h>
33#include <linux/interrupt.h>
34#include <linux/delay.h>
35#include <linux/export.h>
36#include "ahci.h"
37
38#define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f))
39#define CPHY_ADDR(addr) (((addr) & 0x1ff) << 2)
40#define SERDES_CR_CTL 0x80a0
41#define SERDES_CR_ADDR 0x80a1
42#define SERDES_CR_DATA 0x80a2
43#define CR_BUSY 0x0001
44#define CR_START 0x0001
45#define CR_WR_RDN 0x0002
46#define CPHY_RX_INPUT_STS 0x2002
47#define CPHY_SATA_OVERRIDE 0x4000
48#define CPHY_OVERRIDE 0x2005
49#define SPHY_LANE 0x100
50#define SPHY_HALF_RATE 0x0001
51#define CPHY_SATA_DPLL_MODE 0x0700
52#define CPHY_SATA_DPLL_SHIFT 8
53#define CPHY_SATA_DPLL_RESET (1 << 11)
54#define CPHY_PHY_COUNT 6
55#define CPHY_LANE_COUNT 4
56#define CPHY_PORT_COUNT (CPHY_PHY_COUNT * CPHY_LANE_COUNT)
57
58static DEFINE_SPINLOCK(cphy_lock);
59/* Each of the 6 phys can have up to 4 sata ports attached to i. Map 0-based
60 * sata ports to their phys and then to their lanes within the phys
61 */
62struct phy_lane_info {
63 void __iomem *phy_base;
64 u8 lane_mapping;
65 u8 phy_devs;
66};
67static struct phy_lane_info port_data[CPHY_PORT_COUNT];
68
69static u32 __combo_phy_reg_read(u8 sata_port, u32 addr)
70{
71 u32 data;
72 u8 dev = port_data[sata_port].phy_devs;
73 spin_lock(&cphy_lock);
74 writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800);
75 data = readl(port_data[sata_port].phy_base + CPHY_ADDR(addr));
76 spin_unlock(&cphy_lock);
77 return data;
78}
79
80static void __combo_phy_reg_write(u8 sata_port, u32 addr, u32 data)
81{
82 u8 dev = port_data[sata_port].phy_devs;
83 spin_lock(&cphy_lock);
84 writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800);
85 writel(data, port_data[sata_port].phy_base + CPHY_ADDR(addr));
86 spin_unlock(&cphy_lock);
87}
88
89static void combo_phy_wait_for_ready(u8 sata_port)
90{
91 while (__combo_phy_reg_read(sata_port, SERDES_CR_CTL) & CR_BUSY)
92 udelay(5);
93}
94
95static u32 combo_phy_read(u8 sata_port, u32 addr)
96{
97 combo_phy_wait_for_ready(sata_port);
98 __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr);
99 __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_START);
100 combo_phy_wait_for_ready(sata_port);
101 return __combo_phy_reg_read(sata_port, SERDES_CR_DATA);
102}
103
104static void combo_phy_write(u8 sata_port, u32 addr, u32 data)
105{
106 combo_phy_wait_for_ready(sata_port);
107 __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr);
108 __combo_phy_reg_write(sata_port, SERDES_CR_DATA, data);
109 __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_WR_RDN | CR_START);
110}
111
112static void highbank_cphy_disable_overrides(u8 sata_port)
113{
114 u8 lane = port_data[sata_port].lane_mapping;
115 u32 tmp;
116 if (unlikely(port_data[sata_port].phy_base == NULL))
117 return;
118 tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
119 tmp &= ~CPHY_SATA_OVERRIDE;
120 combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
121}
122
123static void cphy_override_rx_mode(u8 sata_port, u32 val)
124{
125 u8 lane = port_data[sata_port].lane_mapping;
126 u32 tmp;
127 tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
128 tmp &= ~CPHY_SATA_OVERRIDE;
129 combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
130
131 tmp |= CPHY_SATA_OVERRIDE;
132 combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
133
134 tmp &= ~CPHY_SATA_DPLL_MODE;
135 tmp |= val << CPHY_SATA_DPLL_SHIFT;
136 combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
137
138 tmp |= CPHY_SATA_DPLL_RESET;
139 combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
140
141 tmp &= ~CPHY_SATA_DPLL_RESET;
142 combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp);
143
144 msleep(15);
145}
146
147static void highbank_cphy_override_lane(u8 sata_port)
148{
149 u8 lane = port_data[sata_port].lane_mapping;
150 u32 tmp, k = 0;
151
152 if (unlikely(port_data[sata_port].phy_base == NULL))
153 return;
154 do {
155 tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS +
156 lane * SPHY_LANE);
157 } while ((tmp & SPHY_HALF_RATE) && (k++ < 1000));
158 cphy_override_rx_mode(sata_port, 3);
159}
160
161static int highbank_initialize_phys(struct device *dev, void __iomem *addr)
162{
163 struct device_node *sata_node = dev->of_node;
164 int phy_count = 0, phy, port = 0;
165 void __iomem *cphy_base[CPHY_PHY_COUNT];
166 struct device_node *phy_nodes[CPHY_PHY_COUNT];
167 memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT);
168 memset(phy_nodes, 0, sizeof(struct device_node*) * CPHY_PHY_COUNT);
169
170 do {
171 u32 tmp;
172 struct of_phandle_args phy_data;
173 if (of_parse_phandle_with_args(sata_node,
174 "calxeda,port-phys", "#phy-cells",
175 port, &phy_data))
176 break;
177 for (phy = 0; phy < phy_count; phy++) {
178 if (phy_nodes[phy] == phy_data.np)
179 break;
180 }
181 if (phy_nodes[phy] == NULL) {
182 phy_nodes[phy] = phy_data.np;
183 cphy_base[phy] = of_iomap(phy_nodes[phy], 0);
184 if (cphy_base[phy] == NULL) {
185 return 0;
186 }
187 phy_count += 1;
188 }
189 port_data[port].lane_mapping = phy_data.args[0];
190 of_property_read_u32(phy_nodes[phy], "phydev", &tmp);
191 port_data[port].phy_devs = tmp;
192 port_data[port].phy_base = cphy_base[phy];
193 of_node_put(phy_data.np);
194 port += 1;
195 } while (port < CPHY_PORT_COUNT);
196 return 0;
197}
198
199static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
200 unsigned long deadline)
201{
202 const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
203 struct ata_port *ap = link->ap;
204 struct ahci_port_priv *pp = ap->private_data;
205 u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
206 struct ata_taskfile tf;
207 bool online;
208 u32 sstatus;
209 int rc;
210 int retry = 10;
211
212 ahci_stop_engine(ap);
213
214 /* clear D2H reception area to properly wait for D2H FIS */
215 ata_tf_init(link->device, &tf);
Sergei Shtylyov121650a2012-11-01 20:59:28 +0300216 tf.command = ATA_BUSY;
Mark Langsdorf8996b892012-09-06 16:03:30 -0500217 ata_tf_to_fis(&tf, 0, 0, d2h_fis);
218
219 do {
220 highbank_cphy_disable_overrides(link->ap->port_no);
221 rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
222 highbank_cphy_override_lane(link->ap->port_no);
223
224 /* If the status is 1, we are connected, but the link did not
225 * come up. So retry resetting the link again.
226 */
227 if (sata_scr_read(link, SCR_STATUS, &sstatus))
228 break;
229 if (!(sstatus & 0x3))
230 break;
231 } while (!online && retry--);
232
233 ahci_start_engine(ap);
234
235 if (online)
236 *class = ahci_dev_classify(ap);
237
238 return rc;
239}
240
241static struct ata_port_operations ahci_highbank_ops = {
242 .inherits = &ahci_ops,
243 .hardreset = ahci_highbank_hardreset,
244};
245
246static const struct ata_port_info ahci_highbank_port_info = {
247 .flags = AHCI_FLAG_COMMON,
248 .pio_mask = ATA_PIO4,
249 .udma_mask = ATA_UDMA6,
250 .port_ops = &ahci_highbank_ops,
251};
252
253static struct scsi_host_template ahci_highbank_platform_sht = {
254 AHCI_SHT("highbank-ahci"),
255};
256
257static const struct of_device_id ahci_of_match[] = {
258 { .compatible = "calxeda,hb-ahci" },
259 {},
260};
261MODULE_DEVICE_TABLE(of, ahci_of_match);
262
Arnd Bergmannc37472d2012-11-06 22:55:32 +0100263static int __devinit ahci_highbank_probe(struct platform_device *pdev)
Mark Langsdorf8996b892012-09-06 16:03:30 -0500264{
265 struct device *dev = &pdev->dev;
266 struct ahci_host_priv *hpriv;
267 struct ata_host *host;
268 struct resource *mem;
269 int irq;
270 int n_ports;
271 int i;
272 int rc;
273 struct ata_port_info pi = ahci_highbank_port_info;
274 const struct ata_port_info *ppi[] = { &pi, NULL };
275
276 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
277 if (!mem) {
278 dev_err(dev, "no mmio space\n");
279 return -EINVAL;
280 }
281
282 irq = platform_get_irq(pdev, 0);
283 if (irq <= 0) {
284 dev_err(dev, "no irq\n");
285 return -EINVAL;
286 }
287
288 hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
289 if (!hpriv) {
290 dev_err(dev, "can't alloc ahci_host_priv\n");
291 return -ENOMEM;
292 }
293
294 hpriv->flags |= (unsigned long)pi.private_data;
295
296 hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
297 if (!hpriv->mmio) {
298 dev_err(dev, "can't map %pR\n", mem);
299 return -ENOMEM;
300 }
301
302 rc = highbank_initialize_phys(dev, hpriv->mmio);
303 if (rc)
304 return rc;
305
306
307 ahci_save_initial_config(dev, hpriv, 0, 0);
308
309 /* prepare host */
310 if (hpriv->cap & HOST_CAP_NCQ)
311 pi.flags |= ATA_FLAG_NCQ;
312
313 if (hpriv->cap & HOST_CAP_PMP)
314 pi.flags |= ATA_FLAG_PMP;
315
316 ahci_set_em_messages(hpriv, &pi);
317
318 /* CAP.NP sometimes indicate the index of the last enabled
319 * port, at other times, that of the last possible port, so
320 * determining the maximum port number requires looking at
321 * both CAP.NP and port_map.
322 */
323 n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
324
325 host = ata_host_alloc_pinfo(dev, ppi, n_ports);
326 if (!host) {
327 rc = -ENOMEM;
328 goto err0;
329 }
330
331 host->private_data = hpriv;
332
333 if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
334 host->flags |= ATA_HOST_PARALLEL_SCAN;
335
336 if (pi.flags & ATA_FLAG_EM)
337 ahci_reset_em(host);
338
339 for (i = 0; i < host->n_ports; i++) {
340 struct ata_port *ap = host->ports[i];
341
342 ata_port_desc(ap, "mmio %pR", mem);
343 ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
344
345 /* set enclosure management message type */
346 if (ap->flags & ATA_FLAG_EM)
347 ap->em_message_type = hpriv->em_msg_type;
348
349 /* disabled/not-implemented port */
350 if (!(hpriv->port_map & (1 << i)))
351 ap->ops = &ata_dummy_port_ops;
352 }
353
354 rc = ahci_reset_controller(host);
355 if (rc)
356 goto err0;
357
358 ahci_init_controller(host);
359 ahci_print_info(host, "platform");
360
361 rc = ata_host_activate(host, irq, ahci_interrupt, 0,
362 &ahci_highbank_platform_sht);
363 if (rc)
364 goto err0;
365
366 return 0;
367err0:
368 return rc;
369}
370
Yuanhan Liu29448ec2012-10-16 22:59:01 +0800371#ifdef CONFIG_PM_SLEEP
Mark Langsdorf8996b892012-09-06 16:03:30 -0500372static int ahci_highbank_suspend(struct device *dev)
373{
374 struct ata_host *host = dev_get_drvdata(dev);
375 struct ahci_host_priv *hpriv = host->private_data;
376 void __iomem *mmio = hpriv->mmio;
377 u32 ctl;
378 int rc;
379
380 if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
381 dev_err(dev, "firmware update required for suspend/resume\n");
382 return -EIO;
383 }
384
385 /*
386 * AHCI spec rev1.1 section 8.3.3:
387 * Software must disable interrupts prior to requesting a
388 * transition of the HBA to D3 state.
389 */
390 ctl = readl(mmio + HOST_CTL);
391 ctl &= ~HOST_IRQ_EN;
392 writel(ctl, mmio + HOST_CTL);
393 readl(mmio + HOST_CTL); /* flush */
394
395 rc = ata_host_suspend(host, PMSG_SUSPEND);
396 if (rc)
397 return rc;
398
399 return 0;
400}
401
402static int ahci_highbank_resume(struct device *dev)
403{
404 struct ata_host *host = dev_get_drvdata(dev);
405 int rc;
406
407 if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
408 rc = ahci_reset_controller(host);
409 if (rc)
410 return rc;
411
412 ahci_init_controller(host);
413 }
414
415 ata_host_resume(host);
416
417 return 0;
418}
419#endif
420
421SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops,
422 ahci_highbank_suspend, ahci_highbank_resume);
423
424static struct platform_driver ahci_highbank_driver = {
Brian Norrise2ec1812012-12-03 10:34:39 -0800425 .remove = ata_platform_remove_one,
Mark Langsdorf8996b892012-09-06 16:03:30 -0500426 .driver = {
427 .name = "highbank-ahci",
428 .owner = THIS_MODULE,
429 .of_match_table = ahci_of_match,
430 .pm = &ahci_highbank_pm_ops,
431 },
432 .probe = ahci_highbank_probe,
433};
434
435module_platform_driver(ahci_highbank_driver);
436
437MODULE_DESCRIPTION("Calxeda Highbank AHCI SATA platform driver");
438MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>");
439MODULE_LICENSE("GPL");
440MODULE_ALIAS("sata:highbank");