Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * This file contains work-arounds for many known PCI hardware |
| 3 | * bugs. Devices present only on certain architectures (host |
| 4 | * bridges et cetera) should be handled in arch-specific code. |
| 5 | * |
| 6 | * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. |
| 7 | * |
| 8 | * Copyright (c) 1999 Martin Mares <mj@ucw.cz> |
| 9 | * |
David Brownell | 7586269 | 2005-09-23 17:14:37 -0700 | [diff] [blame] | 10 | * Init/reset quirks for USB host controllers should be in the |
| 11 | * USB quirks file, where their drivers can access reuse it. |
| 12 | * |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 13 | * The bridge optimization stuff has been removed. If you really |
| 14 | * have a silly BIOS which is unable to set your host bridge right, |
| 15 | * use the PowerTweak utility (see http://powertweak.sourceforge.net). |
| 16 | */ |
| 17 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 18 | #include <linux/types.h> |
| 19 | #include <linux/kernel.h> |
| 20 | #include <linux/pci.h> |
| 21 | #include <linux/init.h> |
| 22 | #include <linux/delay.h> |
Len Brown | 25be5e6 | 2005-05-27 04:21:50 -0400 | [diff] [blame] | 23 | #include <linux/acpi.h> |
bjorn.helgaas@hp.com | 9f23ed3 | 2007-12-17 14:09:38 -0700 | [diff] [blame] | 24 | #include <linux/kallsyms.h> |
Andreas Petlund | 75e07fc | 2008-11-20 20:42:25 -0800 | [diff] [blame] | 25 | #include <linux/dmi.h> |
Alexander Duyck | 649426e | 2009-03-05 13:57:28 -0500 | [diff] [blame] | 26 | #include <linux/pci-aspm.h> |
Yuji Shimada | 32a9a682 | 2009-03-16 17:13:39 +0900 | [diff] [blame] | 27 | #include <linux/ioport.h> |
Rafael J. Wysocki | 93177a7 | 2010-01-02 22:57:24 +0100 | [diff] [blame] | 28 | #include <asm/dma.h> /* isa_dma_bridge_buggy */ |
Greg KH | bc56b9e | 2005-04-08 14:53:31 +0900 | [diff] [blame] | 29 | #include "pci.h" |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 30 | |
Yuji Shimada | 32a9a682 | 2009-03-16 17:13:39 +0900 | [diff] [blame] | 31 | /* |
Yuji Shimada | 0cdbe30 | 2009-04-06 10:24:21 +0900 | [diff] [blame] | 32 | * This quirk function disables memory decoding and releases memory resources |
| 33 | * of the device specified by kernel's boot parameter 'pci=resource_alignment='. |
Yuji Shimada | 32a9a682 | 2009-03-16 17:13:39 +0900 | [diff] [blame] | 34 | * It also rounds up size to specified alignment. |
| 35 | * Later on, the kernel will assign page-aligned memory resource back |
Yuji Shimada | 0cdbe30 | 2009-04-06 10:24:21 +0900 | [diff] [blame] | 36 | * to the device. |
Yuji Shimada | 32a9a682 | 2009-03-16 17:13:39 +0900 | [diff] [blame] | 37 | */ |
| 38 | static void __devinit quirk_resource_alignment(struct pci_dev *dev) |
| 39 | { |
| 40 | int i; |
| 41 | struct resource *r; |
| 42 | resource_size_t align, size; |
Yuji Shimada | 0cdbe30 | 2009-04-06 10:24:21 +0900 | [diff] [blame] | 43 | u16 command; |
Yuji Shimada | 32a9a682 | 2009-03-16 17:13:39 +0900 | [diff] [blame] | 44 | |
| 45 | if (!pci_is_reassigndev(dev)) |
| 46 | return; |
| 47 | |
| 48 | if (dev->hdr_type == PCI_HEADER_TYPE_NORMAL && |
| 49 | (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) { |
| 50 | dev_warn(&dev->dev, |
| 51 | "Can't reassign resources to host bridge.\n"); |
| 52 | return; |
| 53 | } |
| 54 | |
Yuji Shimada | 0cdbe30 | 2009-04-06 10:24:21 +0900 | [diff] [blame] | 55 | dev_info(&dev->dev, |
| 56 | "Disabling memory decoding and releasing memory resources.\n"); |
| 57 | pci_read_config_word(dev, PCI_COMMAND, &command); |
| 58 | command &= ~PCI_COMMAND_MEMORY; |
| 59 | pci_write_config_word(dev, PCI_COMMAND, command); |
Yuji Shimada | 32a9a682 | 2009-03-16 17:13:39 +0900 | [diff] [blame] | 60 | |
| 61 | align = pci_specified_resource_alignment(dev); |
| 62 | for (i=0; i < PCI_BRIDGE_RESOURCES; i++) { |
| 63 | r = &dev->resource[i]; |
| 64 | if (!(r->flags & IORESOURCE_MEM)) |
| 65 | continue; |
| 66 | size = resource_size(r); |
| 67 | if (size < align) { |
| 68 | size = align; |
| 69 | dev_info(&dev->dev, |
| 70 | "Rounding up size of resource #%d to %#llx.\n", |
| 71 | i, (unsigned long long)size); |
| 72 | } |
| 73 | r->end = size - 1; |
| 74 | r->start = 0; |
| 75 | } |
| 76 | /* Need to disable bridge's resource window, |
| 77 | * to enable the kernel to reassign new resource |
| 78 | * window later on. |
| 79 | */ |
| 80 | if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && |
| 81 | (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { |
| 82 | for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) { |
| 83 | r = &dev->resource[i]; |
| 84 | if (!(r->flags & IORESOURCE_MEM)) |
| 85 | continue; |
| 86 | r->end = resource_size(r) - 1; |
| 87 | r->start = 0; |
| 88 | } |
| 89 | pci_disable_bridge_window(dev); |
| 90 | } |
| 91 | } |
| 92 | DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_resource_alignment); |
| 93 | |
Doug Thompson | bd8481e | 2006-05-08 17:06:09 -0700 | [diff] [blame] | 94 | /* The Mellanox Tavor device gives false positive parity errors |
| 95 | * Mark this device with a broken_parity_status, to allow |
| 96 | * PCI scanning code to "skip" this now blacklisted device. |
| 97 | */ |
| 98 | static void __devinit quirk_mellanox_tavor(struct pci_dev *dev) |
| 99 | { |
| 100 | dev->broken_parity_status = 1; /* This device gives false positives */ |
| 101 | } |
| 102 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor); |
| 103 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor); |
| 104 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 105 | /* Deal with broken BIOS'es that neglect to enable passive release, |
| 106 | which can cause problems in combination with the 82441FX/PPro MTRRs */ |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 107 | static void quirk_passive_release(struct pci_dev *dev) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 108 | { |
| 109 | struct pci_dev *d = NULL; |
| 110 | unsigned char dlc; |
| 111 | |
| 112 | /* We have to make sure a particular bit is set in the PIIX3 |
| 113 | ISA bridge, so we have to go out and find it. */ |
| 114 | while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) { |
| 115 | pci_read_config_byte(d, 0x82, &dlc); |
| 116 | if (!(dlc & 1<<1)) { |
Adam Jackson | 999da9f | 2008-12-01 14:30:29 -0800 | [diff] [blame] | 117 | dev_info(&d->dev, "PIIX3: Enabling Passive Release\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 118 | dlc |= 1<<1; |
| 119 | pci_write_config_byte(d, 0x82, dlc); |
| 120 | } |
| 121 | } |
| 122 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 123 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); |
| 124 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 125 | |
| 126 | /* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround |
| 127 | but VIA don't answer queries. If you happen to have good contacts at VIA |
| 128 | ask them for me please -- Alan |
| 129 | |
| 130 | This appears to be BIOS not version dependent. So presumably there is a |
| 131 | chipset level fix */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 132 | |
| 133 | static void __devinit quirk_isa_dma_hangs(struct pci_dev *dev) |
| 134 | { |
| 135 | if (!isa_dma_bridge_buggy) { |
| 136 | isa_dma_bridge_buggy=1; |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 137 | dev_info(&dev->dev, "Activating ISA DMA hang workarounds\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 138 | } |
| 139 | } |
| 140 | /* |
| 141 | * Its not totally clear which chipsets are the problematic ones |
| 142 | * We know 82C586 and 82C596 variants are affected. |
| 143 | */ |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 144 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs); |
| 145 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs); |
| 146 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs); |
| 147 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs); |
| 148 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs); |
| 149 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs); |
| 150 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 151 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 152 | /* |
| 153 | * Chipsets where PCI->PCI transfers vanish or hang |
| 154 | */ |
| 155 | static void __devinit quirk_nopcipci(struct pci_dev *dev) |
| 156 | { |
| 157 | if ((pci_pci_problems & PCIPCI_FAIL)==0) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 158 | dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 159 | pci_pci_problems |= PCIPCI_FAIL; |
| 160 | } |
| 161 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 162 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci); |
| 163 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci); |
Alan Cox | 236561e | 2006-09-30 23:27:03 -0700 | [diff] [blame] | 164 | |
| 165 | static void __devinit quirk_nopciamd(struct pci_dev *dev) |
| 166 | { |
| 167 | u8 rev; |
| 168 | pci_read_config_byte(dev, 0x08, &rev); |
| 169 | if (rev == 0x13) { |
| 170 | /* Erratum 24 */ |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 171 | dev_info(&dev->dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n"); |
Alan Cox | 236561e | 2006-09-30 23:27:03 -0700 | [diff] [blame] | 172 | pci_pci_problems |= PCIAGP_FAIL; |
| 173 | } |
| 174 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 175 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 176 | |
| 177 | /* |
| 178 | * Triton requires workarounds to be used by the drivers |
| 179 | */ |
| 180 | static void __devinit quirk_triton(struct pci_dev *dev) |
| 181 | { |
| 182 | if ((pci_pci_problems&PCIPCI_TRITON)==0) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 183 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 184 | pci_pci_problems |= PCIPCI_TRITON; |
| 185 | } |
| 186 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 187 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton); |
| 188 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton); |
| 189 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton); |
| 190 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 191 | |
| 192 | /* |
| 193 | * VIA Apollo KT133 needs PCI latency patch |
| 194 | * Made according to a windows driver based patch by George E. Breese |
| 195 | * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm |
| 196 | * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for |
| 197 | * the info on which Mr Breese based his work. |
| 198 | * |
| 199 | * Updated based on further information from the site and also on |
| 200 | * information provided by VIA |
| 201 | */ |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 202 | static void quirk_vialatency(struct pci_dev *dev) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 203 | { |
| 204 | struct pci_dev *p; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 205 | u8 busarb; |
| 206 | /* Ok we have a potential problem chipset here. Now see if we have |
| 207 | a buggy southbridge */ |
| 208 | |
| 209 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL); |
| 210 | if (p!=NULL) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 211 | /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */ |
| 212 | /* Check for buggy part revisions */ |
Auke Kok | 2b1afa8 | 2007-10-29 14:55:02 -0700 | [diff] [blame] | 213 | if (p->revision < 0x40 || p->revision > 0x42) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 214 | goto exit; |
| 215 | } else { |
| 216 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); |
| 217 | if (p==NULL) /* No problem parts */ |
| 218 | goto exit; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 219 | /* Check for buggy part revisions */ |
Auke Kok | 2b1afa8 | 2007-10-29 14:55:02 -0700 | [diff] [blame] | 220 | if (p->revision < 0x10 || p->revision > 0x12) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 221 | goto exit; |
| 222 | } |
| 223 | |
| 224 | /* |
| 225 | * Ok we have the problem. Now set the PCI master grant to |
| 226 | * occur every master grant. The apparent bug is that under high |
| 227 | * PCI load (quite common in Linux of course) you can get data |
| 228 | * loss when the CPU is held off the bus for 3 bus master requests |
| 229 | * This happens to include the IDE controllers.... |
| 230 | * |
| 231 | * VIA only apply this fix when an SB Live! is present but under |
| 232 | * both Linux and Windows this isnt enough, and we have seen |
| 233 | * corruption without SB Live! but with things like 3 UDMA IDE |
| 234 | * controllers. So we ignore that bit of the VIA recommendation.. |
| 235 | */ |
| 236 | |
| 237 | pci_read_config_byte(dev, 0x76, &busarb); |
| 238 | /* Set bit 4 and bi 5 of byte 76 to 0x01 |
| 239 | "Master priority rotation on every PCI master grant */ |
| 240 | busarb &= ~(1<<5); |
| 241 | busarb |= (1<<4); |
| 242 | pci_write_config_byte(dev, 0x76, busarb); |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 243 | dev_info(&dev->dev, "Applying VIA southbridge workaround\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 244 | exit: |
| 245 | pci_dev_put(p); |
| 246 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 247 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); |
| 248 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); |
| 249 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 250 | /* Must restore this on a resume from RAM */ |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 251 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); |
| 252 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); |
| 253 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 254 | |
| 255 | /* |
| 256 | * VIA Apollo VP3 needs ETBF on BT848/878 |
| 257 | */ |
| 258 | static void __devinit quirk_viaetbf(struct pci_dev *dev) |
| 259 | { |
| 260 | if ((pci_pci_problems&PCIPCI_VIAETBF)==0) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 261 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 262 | pci_pci_problems |= PCIPCI_VIAETBF; |
| 263 | } |
| 264 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 265 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 266 | |
| 267 | static void __devinit quirk_vsfx(struct pci_dev *dev) |
| 268 | { |
| 269 | if ((pci_pci_problems&PCIPCI_VSFX)==0) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 270 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 271 | pci_pci_problems |= PCIPCI_VSFX; |
| 272 | } |
| 273 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 274 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 275 | |
| 276 | /* |
| 277 | * Ali Magik requires workarounds to be used by the drivers |
| 278 | * that DMA to AGP space. Latency must be set to 0xA and triton |
| 279 | * workaround applied too |
| 280 | * [Info kindly provided by ALi] |
| 281 | */ |
| 282 | static void __init quirk_alimagik(struct pci_dev *dev) |
| 283 | { |
| 284 | if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 285 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 286 | pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON; |
| 287 | } |
| 288 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 289 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik); |
| 290 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 291 | |
| 292 | /* |
| 293 | * Natoma has some interesting boundary conditions with Zoran stuff |
| 294 | * at least |
| 295 | */ |
| 296 | static void __devinit quirk_natoma(struct pci_dev *dev) |
| 297 | { |
| 298 | if ((pci_pci_problems&PCIPCI_NATOMA)==0) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 299 | dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 300 | pci_pci_problems |= PCIPCI_NATOMA; |
| 301 | } |
| 302 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 303 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma); |
| 304 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma); |
| 305 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma); |
| 306 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma); |
| 307 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma); |
| 308 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 309 | |
| 310 | /* |
| 311 | * This chip can cause PCI parity errors if config register 0xA0 is read |
| 312 | * while DMAs are occurring. |
| 313 | */ |
| 314 | static void __devinit quirk_citrine(struct pci_dev *dev) |
| 315 | { |
| 316 | dev->cfg_size = 0xA0; |
| 317 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 318 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 319 | |
| 320 | /* |
| 321 | * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. |
| 322 | * If it's needed, re-allocate the region. |
| 323 | */ |
| 324 | static void __devinit quirk_s3_64M(struct pci_dev *dev) |
| 325 | { |
| 326 | struct resource *r = &dev->resource[0]; |
| 327 | |
| 328 | if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) { |
| 329 | r->start = 0; |
| 330 | r->end = 0x3ffffff; |
| 331 | } |
| 332 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 333 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); |
| 334 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 335 | |
Andres Salomon | 73d2eaa | 2010-02-05 01:42:43 -0500 | [diff] [blame] | 336 | /* |
| 337 | * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS |
| 338 | * ver. 1.33 20070103) don't set the correct ISA PCI region header info. |
| 339 | * BAR0 should be 8 bytes; instead, it may be set to something like 8k |
| 340 | * (which conflicts w/ BAR1's memory range). |
| 341 | */ |
| 342 | static void __devinit quirk_cs5536_vsa(struct pci_dev *dev) |
| 343 | { |
| 344 | if (pci_resource_len(dev, 0) != 8) { |
| 345 | struct resource *res = &dev->resource[0]; |
| 346 | res->end = res->start + 8 - 1; |
| 347 | dev_info(&dev->dev, "CS5536 ISA bridge bug detected " |
| 348 | "(incorrect header); workaround applied.\n"); |
| 349 | } |
| 350 | } |
| 351 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); |
| 352 | |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 353 | static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, |
| 354 | unsigned size, int nr, const char *name) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 355 | { |
| 356 | region &= ~(size-1); |
| 357 | if (region) { |
David S. Miller | 085ae41 | 2005-08-08 13:19:08 -0700 | [diff] [blame] | 358 | struct pci_bus_region bus_region; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 359 | struct resource *res = dev->resource + nr; |
| 360 | |
| 361 | res->name = pci_name(dev); |
| 362 | res->start = region; |
| 363 | res->end = region + size - 1; |
| 364 | res->flags = IORESOURCE_IO; |
David S. Miller | 085ae41 | 2005-08-08 13:19:08 -0700 | [diff] [blame] | 365 | |
| 366 | /* Convert from PCI bus to resource space. */ |
| 367 | bus_region.start = res->start; |
| 368 | bus_region.end = res->end; |
| 369 | pcibios_bus_to_resource(dev, res, &bus_region); |
| 370 | |
Bjorn Helgaas | f967a44 | 2010-03-22 16:34:05 -0600 | [diff] [blame] | 371 | if (pci_claim_resource(dev, nr) == 0) |
| 372 | dev_info(&dev->dev, "quirk: %pR claimed by %s\n", |
| 373 | res, name); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 374 | } |
| 375 | } |
| 376 | |
| 377 | /* |
| 378 | * ATI Northbridge setups MCE the processor if you even |
| 379 | * read somewhere between 0x3b0->0x3bb or read 0x3d3 |
| 380 | */ |
| 381 | static void __devinit quirk_ati_exploding_mce(struct pci_dev *dev) |
| 382 | { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 383 | dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 384 | /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ |
| 385 | request_region(0x3b0, 0x0C, "RadeonIGP"); |
| 386 | request_region(0x3d3, 0x01, "RadeonIGP"); |
| 387 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 388 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 389 | |
| 390 | /* |
| 391 | * Let's make the southbridge information explicit instead |
| 392 | * of having to worry about people probing the ACPI areas, |
| 393 | * for example.. (Yes, it happens, and if you read the wrong |
| 394 | * ACPI register it will put the machine to sleep with no |
| 395 | * way of waking it up again. Bummer). |
| 396 | * |
| 397 | * ALI M7101: Two IO regions pointed to by words at |
| 398 | * 0xE0 (64 bytes of ACPI registers) |
| 399 | * 0xE2 (32 bytes of SMB registers) |
| 400 | */ |
| 401 | static void __devinit quirk_ali7101_acpi(struct pci_dev *dev) |
| 402 | { |
| 403 | u16 region; |
| 404 | |
| 405 | pci_read_config_word(dev, 0xE0, ®ion); |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 406 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 407 | pci_read_config_word(dev, 0xE2, ®ion); |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 408 | quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 409 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 410 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 411 | |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 412 | static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) |
| 413 | { |
| 414 | u32 devres; |
| 415 | u32 mask, size, base; |
| 416 | |
| 417 | pci_read_config_dword(dev, port, &devres); |
| 418 | if ((devres & enable) != enable) |
| 419 | return; |
| 420 | mask = (devres >> 16) & 15; |
| 421 | base = devres & 0xffff; |
| 422 | size = 16; |
| 423 | for (;;) { |
| 424 | unsigned bit = size >> 1; |
| 425 | if ((bit & mask) == bit) |
| 426 | break; |
| 427 | size = bit; |
| 428 | } |
| 429 | /* |
| 430 | * For now we only print it out. Eventually we'll want to |
| 431 | * reserve it (at least if it's in the 0x1000+ range), but |
| 432 | * let's get enough confirmation reports first. |
| 433 | */ |
| 434 | base &= -size; |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 435 | dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base + size - 1); |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 436 | } |
| 437 | |
| 438 | static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) |
| 439 | { |
| 440 | u32 devres; |
| 441 | u32 mask, size, base; |
| 442 | |
| 443 | pci_read_config_dword(dev, port, &devres); |
| 444 | if ((devres & enable) != enable) |
| 445 | return; |
| 446 | base = devres & 0xffff0000; |
| 447 | mask = (devres & 0x3f) << 16; |
| 448 | size = 128 << 16; |
| 449 | for (;;) { |
| 450 | unsigned bit = size >> 1; |
| 451 | if ((bit & mask) == bit) |
| 452 | break; |
| 453 | size = bit; |
| 454 | } |
| 455 | /* |
| 456 | * For now we only print it out. Eventually we'll want to |
| 457 | * reserve it, but let's get enough confirmation reports first. |
| 458 | */ |
| 459 | base &= -size; |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 460 | dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, base + size - 1); |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 461 | } |
| 462 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 463 | /* |
| 464 | * PIIX4 ACPI: Two IO regions pointed to by longwords at |
| 465 | * 0x40 (64 bytes of ACPI registers) |
Linus Torvalds | 08db2a7 | 2005-10-30 14:40:07 -0800 | [diff] [blame] | 466 | * 0x90 (16 bytes of SMB registers) |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 467 | * and a few strange programmable PIIX4 device resources. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 468 | */ |
| 469 | static void __devinit quirk_piix4_acpi(struct pci_dev *dev) |
| 470 | { |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 471 | u32 region, res_a; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 472 | |
| 473 | pci_read_config_dword(dev, 0x40, ®ion); |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 474 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 475 | pci_read_config_dword(dev, 0x90, ®ion); |
Linus Torvalds | 08db2a7 | 2005-10-30 14:40:07 -0800 | [diff] [blame] | 476 | quirk_io_region(dev, region, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 477 | |
| 478 | /* Device resource A has enables for some of the other ones */ |
| 479 | pci_read_config_dword(dev, 0x5c, &res_a); |
| 480 | |
| 481 | piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21); |
| 482 | piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21); |
| 483 | |
| 484 | /* Device resource D is just bitfields for static resources */ |
| 485 | |
| 486 | /* Device 12 enabled? */ |
| 487 | if (res_a & (1 << 29)) { |
| 488 | piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20); |
| 489 | piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7); |
| 490 | } |
| 491 | /* Device 13 enabled? */ |
| 492 | if (res_a & (1 << 30)) { |
| 493 | piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20); |
| 494 | piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7); |
| 495 | } |
| 496 | piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20); |
| 497 | piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 498 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 499 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi); |
| 500 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 501 | |
| 502 | /* |
| 503 | * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at |
| 504 | * 0x40 (128 bytes of ACPI, GPIO & TCO registers) |
| 505 | * 0x58 (64 bytes of GPIO I/O space) |
| 506 | */ |
| 507 | static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev) |
| 508 | { |
| 509 | u32 region; |
| 510 | |
| 511 | pci_read_config_dword(dev, 0x40, ®ion); |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 512 | quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH4 ACPI/GPIO/TCO"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 513 | |
| 514 | pci_read_config_dword(dev, 0x58, ®ion); |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 515 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH4 GPIO"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 516 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 517 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi); |
| 518 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi); |
| 519 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi); |
| 520 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi); |
| 521 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi); |
| 522 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi); |
| 523 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi); |
| 524 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi); |
| 525 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi); |
| 526 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 527 | |
Linus Torvalds | 894886e | 2008-12-06 10:10:10 -0800 | [diff] [blame] | 528 | static void __devinit ich6_lpc_acpi_gpio(struct pci_dev *dev) |
R.Marek@sh.cvut.cz | 2cea752 | 2005-09-27 21:54:51 +0000 | [diff] [blame] | 529 | { |
| 530 | u32 region; |
| 531 | |
| 532 | pci_read_config_dword(dev, 0x40, ®ion); |
| 533 | quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH6 ACPI/GPIO/TCO"); |
| 534 | |
| 535 | pci_read_config_dword(dev, 0x48, ®ion); |
| 536 | quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH6 GPIO"); |
| 537 | } |
Linus Torvalds | 894886e | 2008-12-06 10:10:10 -0800 | [diff] [blame] | 538 | |
| 539 | static void __devinit ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize) |
| 540 | { |
| 541 | u32 val; |
| 542 | u32 size, base; |
| 543 | |
| 544 | pci_read_config_dword(dev, reg, &val); |
| 545 | |
| 546 | /* Enabled? */ |
| 547 | if (!(val & 1)) |
| 548 | return; |
| 549 | base = val & 0xfffc; |
| 550 | if (dynsize) { |
| 551 | /* |
| 552 | * This is not correct. It is 16, 32 or 64 bytes depending on |
| 553 | * register D31:F0:ADh bits 5:4. |
| 554 | * |
| 555 | * But this gets us at least _part_ of it. |
| 556 | */ |
| 557 | size = 16; |
| 558 | } else { |
| 559 | size = 128; |
| 560 | } |
| 561 | base &= ~(size-1); |
| 562 | |
| 563 | /* Just print it out for now. We should reserve it after more debugging */ |
| 564 | dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base+size-1); |
| 565 | } |
| 566 | |
| 567 | static void __devinit quirk_ich6_lpc(struct pci_dev *dev) |
| 568 | { |
| 569 | /* Shared ACPI/GPIO decode with all ICH6+ */ |
| 570 | ich6_lpc_acpi_gpio(dev); |
| 571 | |
| 572 | /* ICH6-specific generic IO decode */ |
| 573 | ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0); |
| 574 | ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1); |
| 575 | } |
| 576 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc); |
| 577 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc); |
| 578 | |
| 579 | static void __devinit ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name) |
| 580 | { |
| 581 | u32 val; |
| 582 | u32 mask, base; |
| 583 | |
| 584 | pci_read_config_dword(dev, reg, &val); |
| 585 | |
| 586 | /* Enabled? */ |
| 587 | if (!(val & 1)) |
| 588 | return; |
| 589 | |
| 590 | /* |
| 591 | * IO base in bits 15:2, mask in bits 23:18, both |
| 592 | * are dword-based |
| 593 | */ |
| 594 | base = val & 0xfffc; |
| 595 | mask = (val >> 16) & 0xfc; |
| 596 | mask |= 3; |
| 597 | |
| 598 | /* Just print it out for now. We should reserve it after more debugging */ |
| 599 | dev_info(&dev->dev, "%s PIO at %04x (mask %04x)\n", name, base, mask); |
| 600 | } |
| 601 | |
| 602 | /* ICH7-10 has the same common LPC generic IO decode registers */ |
| 603 | static void __devinit quirk_ich7_lpc(struct pci_dev *dev) |
| 604 | { |
| 605 | /* We share the common ACPI/DPIO decode with ICH6 */ |
| 606 | ich6_lpc_acpi_gpio(dev); |
| 607 | |
| 608 | /* And have 4 ICH7+ generic decodes */ |
| 609 | ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1"); |
| 610 | ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2"); |
| 611 | ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3"); |
| 612 | ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4"); |
| 613 | } |
| 614 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc); |
| 615 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc); |
| 616 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc); |
| 617 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc); |
| 618 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc); |
| 619 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc); |
| 620 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc); |
| 621 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc); |
| 622 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc); |
| 623 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc); |
| 624 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc); |
| 625 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc); |
| 626 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc); |
R.Marek@sh.cvut.cz | 2cea752 | 2005-09-27 21:54:51 +0000 | [diff] [blame] | 627 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 628 | /* |
| 629 | * VIA ACPI: One IO region pointed to by longword at |
| 630 | * 0x48 or 0x20 (256 bytes of ACPI registers) |
| 631 | */ |
| 632 | static void __devinit quirk_vt82c586_acpi(struct pci_dev *dev) |
| 633 | { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 634 | u32 region; |
| 635 | |
Auke Kok | 651472f | 2007-08-27 16:18:10 -0700 | [diff] [blame] | 636 | if (dev->revision & 0x10) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 637 | pci_read_config_dword(dev, 0x48, ®ion); |
| 638 | region &= PCI_BASE_ADDRESS_IO_MASK; |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 639 | quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES, "vt82c586 ACPI"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 640 | } |
| 641 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 642 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 643 | |
| 644 | /* |
| 645 | * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at |
| 646 | * 0x48 (256 bytes of ACPI registers) |
| 647 | * 0x70 (128 bytes of hardware monitoring register) |
| 648 | * 0x90 (16 bytes of SMB registers) |
| 649 | */ |
| 650 | static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev) |
| 651 | { |
| 652 | u16 hm; |
| 653 | u32 smb; |
| 654 | |
| 655 | quirk_vt82c586_acpi(dev); |
| 656 | |
| 657 | pci_read_config_word(dev, 0x70, &hm); |
| 658 | hm &= PCI_BASE_ADDRESS_IO_MASK; |
Meelis Roos | 02f313b | 2005-10-29 13:31:49 +0300 | [diff] [blame] | 659 | quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1, "vt82c686 HW-mon"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 660 | |
| 661 | pci_read_config_dword(dev, 0x90, &smb); |
| 662 | smb &= PCI_BASE_ADDRESS_IO_MASK; |
Meelis Roos | 02f313b | 2005-10-29 13:31:49 +0300 | [diff] [blame] | 663 | quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2, "vt82c686 SMB"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 664 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 665 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 666 | |
Ivan Kokshaysky | 6d85f29 | 2005-08-08 12:55:54 +0400 | [diff] [blame] | 667 | /* |
| 668 | * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at |
| 669 | * 0x88 (128 bytes of power management registers) |
| 670 | * 0xd0 (16 bytes of SMB registers) |
| 671 | */ |
| 672 | static void __devinit quirk_vt8235_acpi(struct pci_dev *dev) |
| 673 | { |
| 674 | u16 pm, smb; |
| 675 | |
| 676 | pci_read_config_word(dev, 0x88, &pm); |
| 677 | pm &= PCI_BASE_ADDRESS_IO_MASK; |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 678 | quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); |
Ivan Kokshaysky | 6d85f29 | 2005-08-08 12:55:54 +0400 | [diff] [blame] | 679 | |
| 680 | pci_read_config_word(dev, 0xd0, &smb); |
| 681 | smb &= PCI_BASE_ADDRESS_IO_MASK; |
Linus Torvalds | 6693e74 | 2005-10-25 20:40:09 -0700 | [diff] [blame] | 682 | quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1, "vt8235 SMB"); |
Ivan Kokshaysky | 6d85f29 | 2005-08-08 12:55:54 +0400 | [diff] [blame] | 683 | } |
| 684 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); |
| 685 | |
Gabe Black | 1f56f4a | 2009-10-06 09:19:45 -0500 | [diff] [blame] | 686 | /* |
| 687 | * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back: |
| 688 | * Disable fast back-to-back on the secondary bus segment |
| 689 | */ |
| 690 | static void __devinit quirk_xio2000a(struct pci_dev *dev) |
| 691 | { |
| 692 | struct pci_dev *pdev; |
| 693 | u16 command; |
| 694 | |
| 695 | dev_warn(&dev->dev, "TI XIO2000a quirk detected; " |
| 696 | "secondary bus fast back-to-back transfers disabled\n"); |
| 697 | list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) { |
| 698 | pci_read_config_word(pdev, PCI_COMMAND, &command); |
| 699 | if (command & PCI_COMMAND_FAST_BACK) |
| 700 | pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK); |
| 701 | } |
| 702 | } |
| 703 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A, |
| 704 | quirk_xio2000a); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 705 | |
| 706 | #ifdef CONFIG_X86_IO_APIC |
| 707 | |
| 708 | #include <asm/io_apic.h> |
| 709 | |
| 710 | /* |
| 711 | * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip |
| 712 | * devices to the external APIC. |
| 713 | * |
| 714 | * TODO: When we have device-specific interrupt routers, |
| 715 | * this code will go away from quirks. |
| 716 | */ |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 717 | static void quirk_via_ioapic(struct pci_dev *dev) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 718 | { |
| 719 | u8 tmp; |
| 720 | |
| 721 | if (nr_ioapics < 1) |
| 722 | tmp = 0; /* nothing routed to external APIC */ |
| 723 | else |
| 724 | tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ |
| 725 | |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 726 | dev_info(&dev->dev, "%sbling VIA external APIC routing\n", |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 727 | tmp == 0 ? "Disa" : "Ena"); |
| 728 | |
| 729 | /* Offset 0x58: External APIC IRQ output control */ |
| 730 | pci_write_config_byte (dev, 0x58, tmp); |
| 731 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 732 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 733 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 734 | |
| 735 | /* |
Karsten Wiese | a174091 | 2005-09-03 15:56:33 -0700 | [diff] [blame] | 736 | * VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit. |
| 737 | * This leads to doubled level interrupt rates. |
| 738 | * Set this bit to get rid of cycle wastage. |
| 739 | * Otherwise uncritical. |
| 740 | */ |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 741 | static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) |
Karsten Wiese | a174091 | 2005-09-03 15:56:33 -0700 | [diff] [blame] | 742 | { |
| 743 | u8 misc_control2; |
| 744 | #define BYPASS_APIC_DEASSERT 8 |
| 745 | |
| 746 | pci_read_config_byte(dev, 0x5B, &misc_control2); |
| 747 | if (!(misc_control2 & BYPASS_APIC_DEASSERT)) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 748 | dev_info(&dev->dev, "Bypassing VIA 8237 APIC De-Assert Message\n"); |
Karsten Wiese | a174091 | 2005-09-03 15:56:33 -0700 | [diff] [blame] | 749 | pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT); |
| 750 | } |
| 751 | } |
| 752 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 753 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); |
Karsten Wiese | a174091 | 2005-09-03 15:56:33 -0700 | [diff] [blame] | 754 | |
| 755 | /* |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 756 | * The AMD io apic can hang the box when an apic irq is masked. |
| 757 | * We check all revs >= B0 (yet not in the pre production!) as the bug |
| 758 | * is currently marked NoFix |
| 759 | * |
| 760 | * We have multiple reports of hangs with this chipset that went away with |
Alan Cox | 236561e | 2006-09-30 23:27:03 -0700 | [diff] [blame] | 761 | * noapic specified. For the moment we assume it's the erratum. We may be wrong |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 762 | * of course. However the advice is demonstrably good even if so.. |
| 763 | */ |
| 764 | static void __devinit quirk_amd_ioapic(struct pci_dev *dev) |
| 765 | { |
Auke Kok | 44c1013 | 2007-06-08 15:46:36 -0700 | [diff] [blame] | 766 | if (dev->revision >= 0x02) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 767 | dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n"); |
| 768 | dev_warn(&dev->dev, " : booting with the \"noapic\" option\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 769 | } |
| 770 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 771 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 772 | |
| 773 | static void __init quirk_ioapic_rmw(struct pci_dev *dev) |
| 774 | { |
| 775 | if (dev->devfn == 0 && dev->bus->number == 0) |
| 776 | sis_apic_bug = 1; |
| 777 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 778 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 779 | #endif /* CONFIG_X86_IO_APIC */ |
| 780 | |
Peter Oruba | d556ad4 | 2007-05-15 13:59:13 +0200 | [diff] [blame] | 781 | /* |
| 782 | * Some settings of MMRBC can lead to data corruption so block changes. |
| 783 | * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide |
| 784 | */ |
| 785 | static void __init quirk_amd_8131_mmrbc(struct pci_dev *dev) |
| 786 | { |
Auke Kok | aa288d4 | 2007-08-27 16:17:47 -0700 | [diff] [blame] | 787 | if (dev->subordinate && dev->revision <= 0x12) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 788 | dev_info(&dev->dev, "AMD8131 rev %x detected; " |
| 789 | "disabling PCI-X MMRBC\n", dev->revision); |
Peter Oruba | d556ad4 | 2007-05-15 13:59:13 +0200 | [diff] [blame] | 790 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC; |
| 791 | } |
| 792 | } |
| 793 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 794 | |
| 795 | /* |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 796 | * FIXME: it is questionable that quirk_via_acpi |
| 797 | * is needed. It shows up as an ISA bridge, and does not |
| 798 | * support the PCI_INTERRUPT_LINE register at all. Therefore |
| 799 | * it seems like setting the pci_dev's 'irq' to the |
| 800 | * value of the ACPI SCI interrupt is only done for convenience. |
| 801 | * -jgarzik |
| 802 | */ |
| 803 | static void __devinit quirk_via_acpi(struct pci_dev *d) |
| 804 | { |
| 805 | /* |
| 806 | * VIA ACPI device: SCI IRQ line in PCI config byte 0x42 |
| 807 | */ |
| 808 | u8 irq; |
| 809 | pci_read_config_byte(d, 0x42, &irq); |
| 810 | irq &= 0xf; |
| 811 | if (irq && (irq != 2)) |
| 812 | d->irq = irq; |
| 813 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 814 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi); |
| 815 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 816 | |
Daniel Drake | 09d6029 | 2006-09-25 16:52:19 -0700 | [diff] [blame] | 817 | |
| 818 | /* |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 819 | * VIA bridges which have VLink |
Daniel Drake | 09d6029 | 2006-09-25 16:52:19 -0700 | [diff] [blame] | 820 | */ |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 821 | |
Jean Delvare | c06bb5d | 2007-01-30 14:36:09 -0800 | [diff] [blame] | 822 | static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18; |
| 823 | |
| 824 | static void quirk_via_bridge(struct pci_dev *dev) |
| 825 | { |
| 826 | /* See what bridge we have and find the device ranges */ |
| 827 | switch (dev->device) { |
| 828 | case PCI_DEVICE_ID_VIA_82C686: |
Jean Delvare | cb7468e | 2007-01-31 23:48:12 -0800 | [diff] [blame] | 829 | /* The VT82C686 is special, it attaches to PCI and can have |
| 830 | any device number. All its subdevices are functions of |
| 831 | that single device. */ |
| 832 | via_vlink_dev_lo = PCI_SLOT(dev->devfn); |
| 833 | via_vlink_dev_hi = PCI_SLOT(dev->devfn); |
Jean Delvare | c06bb5d | 2007-01-30 14:36:09 -0800 | [diff] [blame] | 834 | break; |
| 835 | case PCI_DEVICE_ID_VIA_8237: |
| 836 | case PCI_DEVICE_ID_VIA_8237A: |
| 837 | via_vlink_dev_lo = 15; |
| 838 | break; |
| 839 | case PCI_DEVICE_ID_VIA_8235: |
| 840 | via_vlink_dev_lo = 16; |
| 841 | break; |
| 842 | case PCI_DEVICE_ID_VIA_8231: |
| 843 | case PCI_DEVICE_ID_VIA_8233_0: |
| 844 | case PCI_DEVICE_ID_VIA_8233A: |
| 845 | case PCI_DEVICE_ID_VIA_8233C_0: |
| 846 | via_vlink_dev_lo = 17; |
| 847 | break; |
| 848 | } |
| 849 | } |
| 850 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge); |
| 851 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge); |
| 852 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge); |
| 853 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge); |
| 854 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge); |
| 855 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge); |
| 856 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge); |
| 857 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge); |
Daniel Drake | 09d6029 | 2006-09-25 16:52:19 -0700 | [diff] [blame] | 858 | |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 859 | /** |
| 860 | * quirk_via_vlink - VIA VLink IRQ number update |
| 861 | * @dev: PCI device |
| 862 | * |
| 863 | * If the device we are dealing with is on a PIC IRQ we need to |
| 864 | * ensure that the IRQ line register which usually is not relevant |
| 865 | * for PCI cards, is actually written so that interrupts get sent |
Jean Delvare | c06bb5d | 2007-01-30 14:36:09 -0800 | [diff] [blame] | 866 | * to the right place. |
| 867 | * We only do this on systems where a VIA south bridge was detected, |
| 868 | * and only for VIA devices on the motherboard (see quirk_via_bridge |
| 869 | * above). |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 870 | */ |
| 871 | |
| 872 | static void quirk_via_vlink(struct pci_dev *dev) |
Len Brown | 25be5e6 | 2005-05-27 04:21:50 -0400 | [diff] [blame] | 873 | { |
| 874 | u8 irq, new_irq; |
| 875 | |
Jean Delvare | c06bb5d | 2007-01-30 14:36:09 -0800 | [diff] [blame] | 876 | /* Check if we have VLink at all */ |
| 877 | if (via_vlink_dev_lo == -1) |
Daniel Drake | 09d6029 | 2006-09-25 16:52:19 -0700 | [diff] [blame] | 878 | return; |
| 879 | |
| 880 | new_irq = dev->irq; |
| 881 | |
| 882 | /* Don't quirk interrupts outside the legacy IRQ range */ |
| 883 | if (!new_irq || new_irq > 15) |
| 884 | return; |
| 885 | |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 886 | /* Internal device ? */ |
Jean Delvare | c06bb5d | 2007-01-30 14:36:09 -0800 | [diff] [blame] | 887 | if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi || |
| 888 | PCI_SLOT(dev->devfn) < via_vlink_dev_lo) |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 889 | return; |
| 890 | |
| 891 | /* This is an internal VLink device on a PIC interrupt. The BIOS |
| 892 | ought to have set this but may not have, so we redo it */ |
| 893 | |
Len Brown | 25be5e6 | 2005-05-27 04:21:50 -0400 | [diff] [blame] | 894 | pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); |
| 895 | if (new_irq != irq) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 896 | dev_info(&dev->dev, "VIA VLink IRQ fixup, from %d to %d\n", |
| 897 | irq, new_irq); |
Len Brown | 25be5e6 | 2005-05-27 04:21:50 -0400 | [diff] [blame] | 898 | udelay(15); /* unknown if delay really needed */ |
| 899 | pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); |
| 900 | } |
| 901 | } |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 902 | DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink); |
Len Brown | 25be5e6 | 2005-05-27 04:21:50 -0400 | [diff] [blame] | 903 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 904 | /* |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 905 | * VIA VT82C598 has its device ID settable and many BIOSes |
| 906 | * set it to the ID of VT82C597 for backward compatibility. |
| 907 | * We need to switch it off to be able to recognize the real |
| 908 | * type of the chip. |
| 909 | */ |
| 910 | static void __devinit quirk_vt82c598_id(struct pci_dev *dev) |
| 911 | { |
| 912 | pci_write_config_byte(dev, 0xfc, 0); |
| 913 | pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device); |
| 914 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 915 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 916 | |
| 917 | /* |
| 918 | * CardBus controllers have a legacy base address that enables them |
| 919 | * to respond as i82365 pcmcia controllers. We don't want them to |
| 920 | * do this even if the Linux CardBus driver is not loaded, because |
| 921 | * the Linux i82365 driver does not (and should not) handle CardBus. |
| 922 | */ |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 923 | static void quirk_cardbus_legacy(struct pci_dev *dev) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 924 | { |
| 925 | if ((PCI_CLASS_BRIDGE_CARDBUS << 8) ^ dev->class) |
| 926 | return; |
| 927 | pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); |
| 928 | } |
| 929 | DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 930 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 931 | |
| 932 | /* |
| 933 | * Following the PCI ordering rules is optional on the AMD762. I'm not |
| 934 | * sure what the designers were smoking but let's not inhale... |
| 935 | * |
| 936 | * To be fair to AMD, it follows the spec by default, its BIOS people |
| 937 | * who turn it off! |
| 938 | */ |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 939 | static void quirk_amd_ordering(struct pci_dev *dev) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 940 | { |
| 941 | u32 pcic; |
| 942 | pci_read_config_dword(dev, 0x4C, &pcic); |
| 943 | if ((pcic&6)!=6) { |
| 944 | pcic |= 6; |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 945 | dev_warn(&dev->dev, "BIOS failed to enable PCI standards compliance; fixing this error\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 946 | pci_write_config_dword(dev, 0x4C, pcic); |
| 947 | pci_read_config_dword(dev, 0x84, &pcic); |
| 948 | pcic |= (1<<23); /* Required in this mode */ |
| 949 | pci_write_config_dword(dev, 0x84, pcic); |
| 950 | } |
| 951 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 952 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 953 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 954 | |
| 955 | /* |
| 956 | * DreamWorks provided workaround for Dunord I-3000 problem |
| 957 | * |
| 958 | * This card decodes and responds to addresses not apparently |
| 959 | * assigned to it. We force a larger allocation to ensure that |
| 960 | * nothing gets put too close to it. |
| 961 | */ |
| 962 | static void __devinit quirk_dunord ( struct pci_dev * dev ) |
| 963 | { |
| 964 | struct resource *r = &dev->resource [1]; |
| 965 | r->start = 0; |
| 966 | r->end = 0xffffff; |
| 967 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 968 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 969 | |
| 970 | /* |
| 971 | * i82380FB mobile docking controller: its PCI-to-PCI bridge |
| 972 | * is subtractive decoding (transparent), and does indicate this |
| 973 | * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80 |
| 974 | * instead of 0x01. |
| 975 | */ |
| 976 | static void __devinit quirk_transparent_bridge(struct pci_dev *dev) |
| 977 | { |
| 978 | dev->transparent = 1; |
| 979 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 980 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge); |
| 981 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 982 | |
| 983 | /* |
| 984 | * Common misconfiguration of the MediaGX/Geode PCI master that will |
| 985 | * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 |
| 986 | * datasheets found at http://www.national.com/ds/GX for info on what |
| 987 | * these bits do. <christer@weinigel.se> |
| 988 | */ |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 989 | static void quirk_mediagx_master(struct pci_dev *dev) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 990 | { |
| 991 | u8 reg; |
| 992 | pci_read_config_byte(dev, 0x41, ®); |
| 993 | if (reg & 2) { |
| 994 | reg &= ~2; |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 995 | dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", reg); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 996 | pci_write_config_byte(dev, 0x41, reg); |
| 997 | } |
| 998 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 999 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); |
| 1000 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1001 | |
| 1002 | /* |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1003 | * Ensure C0 rev restreaming is off. This is normally done by |
| 1004 | * the BIOS but in the odd case it is not the results are corruption |
| 1005 | * hence the presence of a Linux check |
| 1006 | */ |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 1007 | static void quirk_disable_pxb(struct pci_dev *pdev) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1008 | { |
| 1009 | u16 config; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1010 | |
Auke Kok | 44c1013 | 2007-06-08 15:46:36 -0700 | [diff] [blame] | 1011 | if (pdev->revision != 0x04) /* Only C0 requires this */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1012 | return; |
| 1013 | pci_read_config_word(pdev, 0x40, &config); |
| 1014 | if (config & (1<<6)) { |
| 1015 | config &= ~(1<<6); |
| 1016 | pci_write_config_word(pdev, 0x40, config); |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1017 | dev_info(&pdev->dev, "C0 revision 450NX. Disabling PCI restreaming\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1018 | } |
| 1019 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 1020 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1021 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1022 | |
Crane Cai | 05a7d22 | 2008-02-02 13:56:56 +0800 | [diff] [blame] | 1023 | static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev) |
Conke Hu | ab17443 | 2006-12-19 13:11:37 -0800 | [diff] [blame] | 1024 | { |
Shane Huang | 5deab53 | 2009-10-13 11:14:00 +0800 | [diff] [blame] | 1025 | /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */ |
Crane Cai | 05a7d22 | 2008-02-02 13:56:56 +0800 | [diff] [blame] | 1026 | u8 tmp; |
Conke Hu | ab17443 | 2006-12-19 13:11:37 -0800 | [diff] [blame] | 1027 | |
Crane Cai | 05a7d22 | 2008-02-02 13:56:56 +0800 | [diff] [blame] | 1028 | pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp); |
| 1029 | if (tmp == 0x01) { |
Conke Hu | ab17443 | 2006-12-19 13:11:37 -0800 | [diff] [blame] | 1030 | pci_read_config_byte(pdev, 0x40, &tmp); |
| 1031 | pci_write_config_byte(pdev, 0x40, tmp|1); |
| 1032 | pci_write_config_byte(pdev, 0x9, 1); |
| 1033 | pci_write_config_byte(pdev, 0xa, 6); |
| 1034 | pci_write_config_byte(pdev, 0x40, tmp); |
| 1035 | |
Conke Hu | c9f8947 | 2007-01-09 05:32:51 -0500 | [diff] [blame] | 1036 | pdev->class = PCI_CLASS_STORAGE_SATA_AHCI; |
Crane Cai | 05a7d22 | 2008-02-02 13:56:56 +0800 | [diff] [blame] | 1037 | dev_info(&pdev->dev, "set SATA to AHCI mode\n"); |
Conke Hu | ab17443 | 2006-12-19 13:11:37 -0800 | [diff] [blame] | 1038 | } |
| 1039 | } |
Crane Cai | 05a7d22 | 2008-02-02 13:56:56 +0800 | [diff] [blame] | 1040 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1041 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); |
Crane Cai | 05a7d22 | 2008-02-02 13:56:56 +0800 | [diff] [blame] | 1042 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1043 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); |
Shane Huang | 5deab53 | 2009-10-13 11:14:00 +0800 | [diff] [blame] | 1044 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); |
| 1045 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); |
Conke Hu | ab17443 | 2006-12-19 13:11:37 -0800 | [diff] [blame] | 1046 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1047 | /* |
| 1048 | * Serverworks CSB5 IDE does not fully support native mode |
| 1049 | */ |
| 1050 | static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev) |
| 1051 | { |
| 1052 | u8 prog; |
| 1053 | pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); |
| 1054 | if (prog & 5) { |
| 1055 | prog &= ~5; |
| 1056 | pdev->class &= ~5; |
| 1057 | pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); |
Alan Cox | 368c73d | 2006-10-04 00:41:26 +0100 | [diff] [blame] | 1058 | /* PCI layer will sort out resources */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1059 | } |
| 1060 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 1061 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1062 | |
| 1063 | /* |
| 1064 | * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same |
| 1065 | */ |
| 1066 | static void __init quirk_ide_samemode(struct pci_dev *pdev) |
| 1067 | { |
| 1068 | u8 prog; |
| 1069 | |
| 1070 | pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); |
| 1071 | |
| 1072 | if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1073 | dev_info(&pdev->dev, "IDE mode mismatch; forcing legacy mode\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1074 | prog &= ~5; |
| 1075 | pdev->class &= ~5; |
| 1076 | pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1077 | } |
| 1078 | } |
Alan Cox | 368c73d | 2006-10-04 00:41:26 +0100 | [diff] [blame] | 1079 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1080 | |
Alan Cox | 979b179 | 2008-07-24 17:18:38 +0100 | [diff] [blame] | 1081 | /* |
| 1082 | * Some ATA devices break if put into D3 |
| 1083 | */ |
| 1084 | |
| 1085 | static void __devinit quirk_no_ata_d3(struct pci_dev *pdev) |
| 1086 | { |
| 1087 | /* Quirk the legacy ATA devices only. The AHCI ones are ok */ |
| 1088 | if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) |
| 1089 | pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; |
| 1090 | } |
| 1091 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3); |
| 1092 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3); |
Alan Cox | 7a661c6 | 2009-06-24 16:02:27 +0100 | [diff] [blame] | 1093 | /* ALi loses some register settings that we cannot then restore */ |
| 1094 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, quirk_no_ata_d3); |
| 1095 | /* VIA comes back fine but we need to keep it alive or ACPI GTM failures |
| 1096 | occur when mode detecting */ |
| 1097 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_no_ata_d3); |
Alan Cox | 979b179 | 2008-07-24 17:18:38 +0100 | [diff] [blame] | 1098 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1099 | /* This was originally an Alpha specific thing, but it really fits here. |
| 1100 | * The i82375 PCI/EISA bridge appears as non-classified. Fix that. |
| 1101 | */ |
| 1102 | static void __init quirk_eisa_bridge(struct pci_dev *dev) |
| 1103 | { |
| 1104 | dev->class = PCI_CLASS_BRIDGE_EISA << 8; |
| 1105 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 1106 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1107 | |
Johannes Goecke | 7daa0c4 | 2006-04-20 02:43:17 -0700 | [diff] [blame] | 1108 | |
| 1109 | /* |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1110 | * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge |
| 1111 | * is not activated. The myth is that Asus said that they do not want the |
| 1112 | * users to be irritated by just another PCI Device in the Win98 device |
| 1113 | * manager. (see the file prog/hotplug/README.p4b in the lm_sensors |
| 1114 | * package 2.7.0 for details) |
| 1115 | * |
| 1116 | * The SMBus PCI Device can be activated by setting a bit in the ICH LPC |
| 1117 | * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it |
gw.kernel@tnode.com | d7698ed | 2007-08-23 21:22:04 +0200 | [diff] [blame] | 1118 | * becomes necessary to do this tweak in two steps -- the chosen trigger |
| 1119 | * is either the Host bridge (preferred) or on-board VGA controller. |
Jean Delvare | 9208ee8 | 2007-03-24 16:56:44 +0100 | [diff] [blame] | 1120 | * |
| 1121 | * Note that we used to unhide the SMBus that way on Toshiba laptops |
| 1122 | * (Satellite A40 and Tecra M2) but then found that the thermal management |
| 1123 | * was done by SMM code, which could cause unsynchronized concurrent |
| 1124 | * accesses to the SMBus registers, with potentially bad effects. Thus you |
| 1125 | * should be very careful when adding new entries: if SMM is accessing the |
| 1126 | * Intel SMBus, this is a very good reason to leave it hidden. |
Jean Delvare | a99acc8 | 2008-03-28 14:16:04 -0700 | [diff] [blame] | 1127 | * |
| 1128 | * Likewise, many recent laptops use ACPI for thermal management. If the |
| 1129 | * ACPI DSDT code accesses the SMBus, then Linux should not access it |
| 1130 | * natively, and keeping the SMBus hidden is the right thing to do. If you |
| 1131 | * are about to add an entry in the table below, please first disassemble |
| 1132 | * the DSDT and double-check that there is no code accessing the SMBus. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1133 | */ |
Vivek Goyal | 9d24a81 | 2007-01-11 01:52:44 +0100 | [diff] [blame] | 1134 | static int asus_hides_smbus; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1135 | |
| 1136 | static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) |
| 1137 | { |
| 1138 | if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { |
| 1139 | if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) |
| 1140 | switch(dev->subsystem_device) { |
Jean Delvare | a00db37 | 2005-06-29 17:04:06 +0200 | [diff] [blame] | 1141 | case 0x8025: /* P4B-LX */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1142 | case 0x8070: /* P4B */ |
| 1143 | case 0x8088: /* P4B533 */ |
| 1144 | case 0x1626: /* L3C notebook */ |
| 1145 | asus_hides_smbus = 1; |
| 1146 | } |
Jean Delvare | 2f2d39d | 2007-01-05 11:23:15 +0100 | [diff] [blame] | 1147 | else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1148 | switch(dev->subsystem_device) { |
| 1149 | case 0x80b1: /* P4GE-V */ |
| 1150 | case 0x80b2: /* P4PE */ |
| 1151 | case 0x8093: /* P4B533-V */ |
| 1152 | asus_hides_smbus = 1; |
| 1153 | } |
Jean Delvare | 2f2d39d | 2007-01-05 11:23:15 +0100 | [diff] [blame] | 1154 | else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1155 | switch(dev->subsystem_device) { |
| 1156 | case 0x8030: /* P4T533 */ |
| 1157 | asus_hides_smbus = 1; |
| 1158 | } |
Jean Delvare | 2f2d39d | 2007-01-05 11:23:15 +0100 | [diff] [blame] | 1159 | else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1160 | switch (dev->subsystem_device) { |
| 1161 | case 0x8070: /* P4G8X Deluxe */ |
| 1162 | asus_hides_smbus = 1; |
| 1163 | } |
Jean Delvare | 2f2d39d | 2007-01-05 11:23:15 +0100 | [diff] [blame] | 1164 | else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH) |
Jean Delvare | 321311a | 2006-07-31 08:53:15 +0200 | [diff] [blame] | 1165 | switch (dev->subsystem_device) { |
| 1166 | case 0x80c9: /* PU-DLS */ |
| 1167 | asus_hides_smbus = 1; |
| 1168 | } |
Jean Delvare | 2f2d39d | 2007-01-05 11:23:15 +0100 | [diff] [blame] | 1169 | else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1170 | switch (dev->subsystem_device) { |
| 1171 | case 0x1751: /* M2N notebook */ |
| 1172 | case 0x1821: /* M5N notebook */ |
Mats Erik Andersson | 4096ed0 | 2009-05-12 12:05:23 +0200 | [diff] [blame] | 1173 | case 0x1897: /* A6L notebook */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1174 | asus_hides_smbus = 1; |
| 1175 | } |
Jean Delvare | 2f2d39d | 2007-01-05 11:23:15 +0100 | [diff] [blame] | 1176 | else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1177 | switch (dev->subsystem_device) { |
| 1178 | case 0x184b: /* W1N notebook */ |
| 1179 | case 0x186a: /* M6Ne notebook */ |
| 1180 | asus_hides_smbus = 1; |
| 1181 | } |
Jean Delvare | 2f2d39d | 2007-01-05 11:23:15 +0100 | [diff] [blame] | 1182 | else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) |
Jean Delvare | 2e45785 | 2007-01-05 09:17:56 +0100 | [diff] [blame] | 1183 | switch (dev->subsystem_device) { |
| 1184 | case 0x80f2: /* P4P800-X */ |
| 1185 | asus_hides_smbus = 1; |
| 1186 | } |
Jean Delvare | 2f2d39d | 2007-01-05 11:23:15 +0100 | [diff] [blame] | 1187 | else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) |
R.Marek@sh.cvut.cz | acc0663 | 2005-09-29 08:35:41 +0000 | [diff] [blame] | 1188 | switch (dev->subsystem_device) { |
| 1189 | case 0x1882: /* M6V notebook */ |
Jean Delvare | 2d1e1c7 | 2006-04-01 16:46:35 +0200 | [diff] [blame] | 1190 | case 0x1977: /* A6VA notebook */ |
R.Marek@sh.cvut.cz | acc0663 | 2005-09-29 08:35:41 +0000 | [diff] [blame] | 1191 | asus_hides_smbus = 1; |
| 1192 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1193 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { |
| 1194 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) |
| 1195 | switch(dev->subsystem_device) { |
| 1196 | case 0x088C: /* HP Compaq nc8000 */ |
| 1197 | case 0x0890: /* HP Compaq nc6000 */ |
| 1198 | asus_hides_smbus = 1; |
| 1199 | } |
Jean Delvare | 2f2d39d | 2007-01-05 11:23:15 +0100 | [diff] [blame] | 1200 | else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1201 | switch (dev->subsystem_device) { |
| 1202 | case 0x12bc: /* HP D330L */ |
Jean Delvare | e3b1bd5 | 2005-09-21 22:26:31 +0200 | [diff] [blame] | 1203 | case 0x12bd: /* HP D530 */ |
Michal Miroslaw | 74c5742 | 2009-05-12 13:49:25 -0700 | [diff] [blame] | 1204 | case 0x006a: /* HP Compaq nx9500 */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1205 | asus_hides_smbus = 1; |
| 1206 | } |
Jean Delvare | 677cc64 | 2007-11-21 18:29:06 +0100 | [diff] [blame] | 1207 | else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB) |
| 1208 | switch (dev->subsystem_device) { |
| 1209 | case 0x12bf: /* HP xw4100 */ |
| 1210 | asus_hides_smbus = 1; |
| 1211 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1212 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { |
| 1213 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) |
| 1214 | switch(dev->subsystem_device) { |
| 1215 | case 0xC00C: /* Samsung P35 notebook */ |
| 1216 | asus_hides_smbus = 1; |
| 1217 | } |
Rumen Ivanov Zarev | c87f883 | 2005-09-06 13:39:32 -0700 | [diff] [blame] | 1218 | } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { |
| 1219 | if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) |
| 1220 | switch(dev->subsystem_device) { |
| 1221 | case 0x0058: /* Compaq Evo N620c */ |
| 1222 | asus_hides_smbus = 1; |
| 1223 | } |
gw.kernel@tnode.com | d7698ed | 2007-08-23 21:22:04 +0200 | [diff] [blame] | 1224 | else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3) |
| 1225 | switch(dev->subsystem_device) { |
| 1226 | case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */ |
| 1227 | /* Motherboard doesn't have Host bridge |
| 1228 | * subvendor/subdevice IDs, therefore checking |
| 1229 | * its on-board VGA controller */ |
| 1230 | asus_hides_smbus = 1; |
| 1231 | } |
David O'Shea | 8293b0f | 2009-03-02 09:51:13 +0100 | [diff] [blame] | 1232 | else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2) |
Jean Delvare | 10260d9 | 2008-06-04 13:53:31 +0200 | [diff] [blame] | 1233 | switch(dev->subsystem_device) { |
| 1234 | case 0x00b8: /* Compaq Evo D510 CMT */ |
| 1235 | case 0x00b9: /* Compaq Evo D510 SFF */ |
Jean Delvare | 6b5096e | 2009-07-28 11:49:19 +0200 | [diff] [blame] | 1236 | case 0x00ba: /* Compaq Evo D510 USDT */ |
David O'Shea | 8293b0f | 2009-03-02 09:51:13 +0100 | [diff] [blame] | 1237 | /* Motherboard doesn't have Host bridge |
| 1238 | * subvendor/subdevice IDs and on-board VGA |
| 1239 | * controller is disabled if an AGP card is |
| 1240 | * inserted, therefore checking USB UHCI |
| 1241 | * Controller #1 */ |
Jean Delvare | 10260d9 | 2008-06-04 13:53:31 +0200 | [diff] [blame] | 1242 | asus_hides_smbus = 1; |
| 1243 | } |
Krzysztof Helt | 27e4685 | 2008-06-08 13:47:02 +0200 | [diff] [blame] | 1244 | else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC) |
| 1245 | switch (dev->subsystem_device) { |
| 1246 | case 0x001A: /* Compaq Deskpro EN SSF P667 815E */ |
| 1247 | /* Motherboard doesn't have host bridge |
| 1248 | * subvendor/subdevice IDs, therefore checking |
| 1249 | * its on-board VGA controller */ |
| 1250 | asus_hides_smbus = 1; |
| 1251 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1252 | } |
| 1253 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 1254 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge); |
| 1255 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge); |
| 1256 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge); |
| 1257 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge); |
Jean Delvare | 677cc64 | 2007-11-21 18:29:06 +0100 | [diff] [blame] | 1258 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge); |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 1259 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge); |
| 1260 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge); |
| 1261 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge); |
| 1262 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge); |
| 1263 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1264 | |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 1265 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge); |
David O'Shea | 8293b0f | 2009-03-02 09:51:13 +0100 | [diff] [blame] | 1266 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge); |
Krzysztof Helt | 27e4685 | 2008-06-08 13:47:02 +0200 | [diff] [blame] | 1267 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge); |
gw.kernel@tnode.com | d7698ed | 2007-08-23 21:22:04 +0200 | [diff] [blame] | 1268 | |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 1269 | static void asus_hides_smbus_lpc(struct pci_dev *dev) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1270 | { |
| 1271 | u16 val; |
| 1272 | |
| 1273 | if (likely(!asus_hides_smbus)) |
| 1274 | return; |
| 1275 | |
| 1276 | pci_read_config_word(dev, 0xF2, &val); |
| 1277 | if (val & 0x8) { |
| 1278 | pci_write_config_word(dev, 0xF2, val & (~0x8)); |
| 1279 | pci_read_config_word(dev, 0xF2, &val); |
| 1280 | if (val & 0x8) |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1281 | dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", val); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1282 | else |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1283 | dev_info(&dev->dev, "Enabled i801 SMBus device\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1284 | } |
| 1285 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 1286 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); |
| 1287 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); |
| 1288 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); |
| 1289 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); |
| 1290 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); |
| 1291 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); |
| 1292 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1293 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); |
| 1294 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); |
| 1295 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); |
| 1296 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); |
| 1297 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); |
| 1298 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); |
| 1299 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1300 | |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1301 | /* It appears we just have one such device. If not, we have a warning */ |
| 1302 | static void __iomem *asus_rcba_base; |
| 1303 | static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev) |
R.Marek@sh.cvut.cz | acc0663 | 2005-09-29 08:35:41 +0000 | [diff] [blame] | 1304 | { |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1305 | u32 rcba; |
R.Marek@sh.cvut.cz | acc0663 | 2005-09-29 08:35:41 +0000 | [diff] [blame] | 1306 | |
| 1307 | if (likely(!asus_hides_smbus)) |
| 1308 | return; |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1309 | WARN_ON(asus_rcba_base); |
| 1310 | |
R.Marek@sh.cvut.cz | acc0663 | 2005-09-29 08:35:41 +0000 | [diff] [blame] | 1311 | pci_read_config_dword(dev, 0xF0, &rcba); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1312 | /* use bits 31:14, 16 kB aligned */ |
| 1313 | asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); |
| 1314 | if (asus_rcba_base == NULL) |
| 1315 | return; |
| 1316 | } |
| 1317 | |
| 1318 | static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev) |
| 1319 | { |
| 1320 | u32 val; |
| 1321 | |
| 1322 | if (likely(!asus_hides_smbus || !asus_rcba_base)) |
| 1323 | return; |
| 1324 | /* read the Function Disable register, dword mode only */ |
| 1325 | val = readl(asus_rcba_base + 0x3418); |
| 1326 | writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */ |
| 1327 | } |
| 1328 | |
| 1329 | static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev) |
| 1330 | { |
| 1331 | if (likely(!asus_hides_smbus || !asus_rcba_base)) |
| 1332 | return; |
| 1333 | iounmap(asus_rcba_base); |
| 1334 | asus_rcba_base = NULL; |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1335 | dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n"); |
R.Marek@sh.cvut.cz | acc0663 | 2005-09-29 08:35:41 +0000 | [diff] [blame] | 1336 | } |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1337 | |
| 1338 | static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev) |
| 1339 | { |
| 1340 | asus_hides_smbus_lpc_ich6_suspend(dev); |
| 1341 | asus_hides_smbus_lpc_ich6_resume_early(dev); |
| 1342 | asus_hides_smbus_lpc_ich6_resume(dev); |
| 1343 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 1344 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1345 | DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend); |
| 1346 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume); |
| 1347 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early); |
Carl-Daniel Hailfinger | ce007ea | 2006-05-15 09:44:33 -0700 | [diff] [blame] | 1348 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1349 | /* |
| 1350 | * SiS 96x south bridge: BIOS typically hides SMBus device... |
| 1351 | */ |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 1352 | static void quirk_sis_96x_smbus(struct pci_dev *dev) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1353 | { |
| 1354 | u8 val = 0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1355 | pci_read_config_byte(dev, 0x77, &val); |
Mark M. Hoffman | 2f5c33b | 2007-01-08 22:11:29 -0500 | [diff] [blame] | 1356 | if (val & 0x10) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1357 | dev_info(&dev->dev, "Enabling SiS 96x SMBus\n"); |
Mark M. Hoffman | 2f5c33b | 2007-01-08 22:11:29 -0500 | [diff] [blame] | 1358 | pci_write_config_byte(dev, 0x77, val & ~0x10); |
| 1359 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1360 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 1361 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); |
| 1362 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); |
| 1363 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); |
| 1364 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1365 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); |
| 1366 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); |
| 1367 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); |
| 1368 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1369 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1370 | /* |
| 1371 | * ... This is further complicated by the fact that some SiS96x south |
| 1372 | * bridges pretend to be 85C503/5513 instead. In that case see if we |
| 1373 | * spotted a compatible north bridge to make sure. |
| 1374 | * (pci_find_device doesn't work yet) |
| 1375 | * |
| 1376 | * We can also enable the sis96x bit in the discovery register.. |
| 1377 | */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1378 | #define SIS_DETECT_REGISTER 0x40 |
| 1379 | |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 1380 | static void quirk_sis_503(struct pci_dev *dev) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1381 | { |
| 1382 | u8 reg; |
| 1383 | u16 devid; |
| 1384 | |
| 1385 | pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®); |
| 1386 | pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6)); |
| 1387 | pci_read_config_word(dev, PCI_DEVICE_ID, &devid); |
| 1388 | if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) { |
| 1389 | pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg); |
| 1390 | return; |
| 1391 | } |
| 1392 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1393 | /* |
Mark M. Hoffman | 2f5c33b | 2007-01-08 22:11:29 -0500 | [diff] [blame] | 1394 | * Ok, it now shows up as a 96x.. run the 96x quirk by |
| 1395 | * hand in case it has already been processed. |
| 1396 | * (depends on link order, which is apparently not guaranteed) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1397 | */ |
| 1398 | dev->device = devid; |
Mark M. Hoffman | 2f5c33b | 2007-01-08 22:11:29 -0500 | [diff] [blame] | 1399 | quirk_sis_96x_smbus(dev); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1400 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 1401 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1402 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1403 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1404 | |
Bauke Jan Douma | e5548e9 | 2006-02-28 21:44:36 +0100 | [diff] [blame] | 1405 | /* |
| 1406 | * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller |
| 1407 | * and MC97 modem controller are disabled when a second PCI soundcard is |
| 1408 | * present. This patch, tweaking the VT8237 ISA bridge, enables them. |
| 1409 | * -- bjd |
| 1410 | */ |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 1411 | static void asus_hides_ac97_lpc(struct pci_dev *dev) |
Bauke Jan Douma | e5548e9 | 2006-02-28 21:44:36 +0100 | [diff] [blame] | 1412 | { |
| 1413 | u8 val; |
| 1414 | int asus_hides_ac97 = 0; |
| 1415 | |
| 1416 | if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { |
| 1417 | if (dev->device == PCI_DEVICE_ID_VIA_8237) |
| 1418 | asus_hides_ac97 = 1; |
| 1419 | } |
| 1420 | |
| 1421 | if (!asus_hides_ac97) |
| 1422 | return; |
| 1423 | |
| 1424 | pci_read_config_byte(dev, 0x50, &val); |
| 1425 | if (val & 0xc0) { |
| 1426 | pci_write_config_byte(dev, 0x50, val & (~0xc0)); |
| 1427 | pci_read_config_byte(dev, 0x50, &val); |
| 1428 | if (val & 0xc0) |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1429 | dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", val); |
Bauke Jan Douma | e5548e9 | 2006-02-28 21:44:36 +0100 | [diff] [blame] | 1430 | else |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1431 | dev_info(&dev->dev, "Enabled onboard AC97/MC97 devices\n"); |
Bauke Jan Douma | e5548e9 | 2006-02-28 21:44:36 +0100 | [diff] [blame] | 1432 | } |
| 1433 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 1434 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1435 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 1436 | |
Tejun Heo | 7796705 | 2006-08-19 03:54:39 +0900 | [diff] [blame] | 1437 | #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) |
Alan Cox | 15e0c69 | 2006-07-12 15:05:41 +0100 | [diff] [blame] | 1438 | |
| 1439 | /* |
| 1440 | * If we are using libata we can drive this chip properly but must |
| 1441 | * do this early on to make the additional device appear during |
| 1442 | * the PCI scanning. |
| 1443 | */ |
Tejun Heo | 5ee2ae7 | 2007-02-26 20:16:13 +0900 | [diff] [blame] | 1444 | static void quirk_jmicron_ata(struct pci_dev *pdev) |
Alan Cox | 15e0c69 | 2006-07-12 15:05:41 +0100 | [diff] [blame] | 1445 | { |
Tejun Heo | e34bb37 | 2007-02-26 20:24:03 +0900 | [diff] [blame] | 1446 | u32 conf1, conf5, class; |
Alan Cox | 15e0c69 | 2006-07-12 15:05:41 +0100 | [diff] [blame] | 1447 | u8 hdr; |
| 1448 | |
| 1449 | /* Only poke fn 0 */ |
| 1450 | if (PCI_FUNC(pdev->devfn)) |
| 1451 | return; |
| 1452 | |
Tejun Heo | 5ee2ae7 | 2007-02-26 20:16:13 +0900 | [diff] [blame] | 1453 | pci_read_config_dword(pdev, 0x40, &conf1); |
| 1454 | pci_read_config_dword(pdev, 0x80, &conf5); |
Alan Cox | 15e0c69 | 2006-07-12 15:05:41 +0100 | [diff] [blame] | 1455 | |
Tejun Heo | 5ee2ae7 | 2007-02-26 20:16:13 +0900 | [diff] [blame] | 1456 | conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */ |
| 1457 | conf5 &= ~(1 << 24); /* Clear bit 24 */ |
Alan Cox | 15e0c69 | 2006-07-12 15:05:41 +0100 | [diff] [blame] | 1458 | |
Tejun Heo | 5ee2ae7 | 2007-02-26 20:16:13 +0900 | [diff] [blame] | 1459 | switch (pdev->device) { |
Tejun Heo | 4daedcf | 2010-06-03 11:57:04 +0200 | [diff] [blame] | 1460 | case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */ |
| 1461 | case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */ |
Tejun Heo | 5ee2ae7 | 2007-02-26 20:16:13 +0900 | [diff] [blame] | 1462 | /* The controller should be in single function ahci mode */ |
| 1463 | conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ |
| 1464 | break; |
Alan Cox | 15e0c69 | 2006-07-12 15:05:41 +0100 | [diff] [blame] | 1465 | |
Tejun Heo | 5ee2ae7 | 2007-02-26 20:16:13 +0900 | [diff] [blame] | 1466 | case PCI_DEVICE_ID_JMICRON_JMB365: |
| 1467 | case PCI_DEVICE_ID_JMICRON_JMB366: |
| 1468 | /* Redirect IDE second PATA port to the right spot */ |
| 1469 | conf5 |= (1 << 24); |
| 1470 | /* Fall through */ |
| 1471 | case PCI_DEVICE_ID_JMICRON_JMB361: |
| 1472 | case PCI_DEVICE_ID_JMICRON_JMB363: |
| 1473 | /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ |
| 1474 | /* Set the class codes correctly and then direct IDE 0 */ |
Tejun Heo | 3a9e3a5 | 2007-10-23 15:27:31 +0900 | [diff] [blame] | 1475 | conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */ |
Tejun Heo | 5ee2ae7 | 2007-02-26 20:16:13 +0900 | [diff] [blame] | 1476 | break; |
| 1477 | |
| 1478 | case PCI_DEVICE_ID_JMICRON_JMB368: |
| 1479 | /* The controller should be in single function IDE mode */ |
| 1480 | conf1 |= 0x00C00000; /* Set 22, 23 */ |
| 1481 | break; |
Alan Cox | 15e0c69 | 2006-07-12 15:05:41 +0100 | [diff] [blame] | 1482 | } |
Tejun Heo | 5ee2ae7 | 2007-02-26 20:16:13 +0900 | [diff] [blame] | 1483 | |
| 1484 | pci_write_config_dword(pdev, 0x40, conf1); |
| 1485 | pci_write_config_dword(pdev, 0x80, conf5); |
| 1486 | |
| 1487 | /* Update pdev accordingly */ |
| 1488 | pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr); |
| 1489 | pdev->hdr_type = hdr & 0x7f; |
| 1490 | pdev->multifunction = !!(hdr & 0x80); |
Tejun Heo | e34bb37 | 2007-02-26 20:24:03 +0900 | [diff] [blame] | 1491 | |
| 1492 | pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class); |
| 1493 | pdev->class = class >> 8; |
Alan Cox | 15e0c69 | 2006-07-12 15:05:41 +0100 | [diff] [blame] | 1494 | } |
Tejun Heo | 5ee2ae7 | 2007-02-26 20:16:13 +0900 | [diff] [blame] | 1495 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); |
| 1496 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); |
Tejun Heo | 4daedcf | 2010-06-03 11:57:04 +0200 | [diff] [blame] | 1497 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); |
Tejun Heo | 5ee2ae7 | 2007-02-26 20:16:13 +0900 | [diff] [blame] | 1498 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); |
| 1499 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); |
| 1500 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); |
| 1501 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1502 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); |
| 1503 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); |
Tejun Heo | 4daedcf | 2010-06-03 11:57:04 +0200 | [diff] [blame] | 1504 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1505 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); |
| 1506 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); |
| 1507 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); |
| 1508 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); |
Alan Cox | 15e0c69 | 2006-07-12 15:05:41 +0100 | [diff] [blame] | 1509 | |
| 1510 | #endif |
| 1511 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1512 | #ifdef CONFIG_X86_IO_APIC |
| 1513 | static void __init quirk_alder_ioapic(struct pci_dev *pdev) |
| 1514 | { |
| 1515 | int i; |
| 1516 | |
| 1517 | if ((pdev->class >> 8) != 0xff00) |
| 1518 | return; |
| 1519 | |
| 1520 | /* the first BAR is the location of the IO APIC...we must |
| 1521 | * not touch this (and it's already covered by the fixmap), so |
| 1522 | * forcibly insert it into the resource tree */ |
| 1523 | if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0)) |
| 1524 | insert_resource(&iomem_resource, &pdev->resource[0]); |
| 1525 | |
| 1526 | /* The next five BARs all seem to be rubbish, so just clean |
| 1527 | * them out */ |
| 1528 | for (i=1; i < 6; i++) { |
| 1529 | memset(&pdev->resource[i], 0, sizeof(pdev->resource[i])); |
| 1530 | } |
| 1531 | |
| 1532 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 1533 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1534 | #endif |
| 1535 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1536 | static void __devinit quirk_pcie_mch(struct pci_dev *pdev) |
| 1537 | { |
Eric W. Biederman | 0ba379e | 2009-09-06 21:48:35 -0700 | [diff] [blame] | 1538 | pci_msi_off(pdev); |
| 1539 | pdev->no_msi = 1; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1540 | } |
Andrew Morton | 652c538 | 2007-11-21 15:07:13 -0800 | [diff] [blame] | 1541 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch); |
| 1542 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch); |
| 1543 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1544 | |
Kristen Accardi | 4602b88 | 2005-08-16 15:15:58 -0700 | [diff] [blame] | 1545 | |
| 1546 | /* |
| 1547 | * It's possible for the MSI to get corrupted if shpc and acpi |
| 1548 | * are used together on certain PXH-based systems. |
| 1549 | */ |
| 1550 | static void __devinit quirk_pcie_pxh(struct pci_dev *dev) |
| 1551 | { |
Eric W. Biederman | f5f2b13 | 2007-03-05 00:30:07 -0800 | [diff] [blame] | 1552 | pci_msi_off(dev); |
Kristen Accardi | 4602b88 | 2005-08-16 15:15:58 -0700 | [diff] [blame] | 1553 | dev->no_msi = 1; |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1554 | dev_warn(&dev->dev, "PXH quirk detected; SHPC device MSI disabled\n"); |
Kristen Accardi | 4602b88 | 2005-08-16 15:15:58 -0700 | [diff] [blame] | 1555 | } |
| 1556 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh); |
| 1557 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh); |
| 1558 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh); |
| 1559 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); |
| 1560 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); |
| 1561 | |
Kristen Carlson Accardi | ffadcc2 | 2006-07-12 08:59:00 -0700 | [diff] [blame] | 1562 | /* |
| 1563 | * Some Intel PCI Express chipsets have trouble with downstream |
| 1564 | * device power management. |
| 1565 | */ |
| 1566 | static void quirk_intel_pcie_pm(struct pci_dev * dev) |
| 1567 | { |
| 1568 | pci_pm_d3_delay = 120; |
| 1569 | dev->no_d1d2 = 1; |
| 1570 | } |
| 1571 | |
| 1572 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); |
| 1573 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm); |
| 1574 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm); |
| 1575 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm); |
| 1576 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm); |
| 1577 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm); |
| 1578 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm); |
| 1579 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm); |
| 1580 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm); |
| 1581 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm); |
| 1582 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm); |
| 1583 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm); |
| 1584 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm); |
| 1585 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm); |
| 1586 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm); |
| 1587 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm); |
| 1588 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm); |
| 1589 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm); |
| 1590 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); |
| 1591 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); |
| 1592 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); |
Kristen Accardi | 4602b88 | 2005-08-16 15:15:58 -0700 | [diff] [blame] | 1593 | |
Stefan Assmann | 426b3b8 | 2008-06-11 16:35:16 +0200 | [diff] [blame] | 1594 | #ifdef CONFIG_X86_IO_APIC |
| 1595 | /* |
Stefan Assmann | e1d3a90 | 2008-06-11 16:35:17 +0200 | [diff] [blame] | 1596 | * Boot interrupts on some chipsets cannot be turned off. For these chipsets, |
| 1597 | * remap the original interrupt in the linux kernel to the boot interrupt, so |
| 1598 | * that a PCI device's interrupt handler is installed on the boot interrupt |
| 1599 | * line instead. |
| 1600 | */ |
| 1601 | static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) |
| 1602 | { |
Stefan Assmann | 41b9eb2 | 2008-07-15 13:48:55 +0200 | [diff] [blame] | 1603 | if (noioapicquirk || noioapicreroute) |
Stefan Assmann | e1d3a90 | 2008-06-11 16:35:17 +0200 | [diff] [blame] | 1604 | return; |
| 1605 | |
| 1606 | dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT; |
Bjorn Helgaas | fdcdaf6 | 2009-09-14 14:36:41 -0600 | [diff] [blame] | 1607 | dev_info(&dev->dev, "rerouting interrupts for [%04x:%04x]\n", |
| 1608 | dev->vendor, dev->device); |
Stefan Assmann | e1d3a90 | 2008-06-11 16:35:17 +0200 | [diff] [blame] | 1609 | } |
Olaf Dabrunz | 88d1dce | 2008-07-08 15:59:48 +0200 | [diff] [blame] | 1610 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); |
| 1611 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); |
| 1612 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); |
| 1613 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); |
| 1614 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); |
| 1615 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); |
| 1616 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); |
| 1617 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); |
| 1618 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); |
| 1619 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); |
| 1620 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); |
| 1621 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); |
| 1622 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); |
| 1623 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); |
| 1624 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); |
| 1625 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); |
Stefan Assmann | e1d3a90 | 2008-06-11 16:35:17 +0200 | [diff] [blame] | 1626 | |
| 1627 | /* |
Stefan Assmann | 426b3b8 | 2008-06-11 16:35:16 +0200 | [diff] [blame] | 1628 | * On some chipsets we can disable the generation of legacy INTx boot |
| 1629 | * interrupts. |
| 1630 | */ |
| 1631 | |
| 1632 | /* |
| 1633 | * IO-APIC1 on 6300ESB generates boot interrupts, see intel order no |
| 1634 | * 300641-004US, section 5.7.3. |
| 1635 | */ |
| 1636 | #define INTEL_6300_IOAPIC_ABAR 0x40 |
| 1637 | #define INTEL_6300_DISABLE_BOOT_IRQ (1<<14) |
| 1638 | |
| 1639 | static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) |
| 1640 | { |
| 1641 | u16 pci_config_word; |
| 1642 | |
| 1643 | if (noioapicquirk) |
| 1644 | return; |
| 1645 | |
| 1646 | pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word); |
| 1647 | pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; |
| 1648 | pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word); |
| 1649 | |
Bjorn Helgaas | fdcdaf6 | 2009-09-14 14:36:41 -0600 | [diff] [blame] | 1650 | dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", |
| 1651 | dev->vendor, dev->device); |
Stefan Assmann | 426b3b8 | 2008-06-11 16:35:16 +0200 | [diff] [blame] | 1652 | } |
Olaf Dabrunz | 88d1dce | 2008-07-08 15:59:48 +0200 | [diff] [blame] | 1653 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); |
| 1654 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); |
Olaf Dabrunz | 7725118 | 2008-07-08 15:59:47 +0200 | [diff] [blame] | 1655 | |
| 1656 | /* |
| 1657 | * disable boot interrupts on HT-1000 |
| 1658 | */ |
| 1659 | #define BC_HT1000_FEATURE_REG 0x64 |
| 1660 | #define BC_HT1000_PIC_REGS_ENABLE (1<<0) |
| 1661 | #define BC_HT1000_MAP_IDX 0xC00 |
| 1662 | #define BC_HT1000_MAP_DATA 0xC01 |
| 1663 | |
| 1664 | static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) |
| 1665 | { |
| 1666 | u32 pci_config_dword; |
| 1667 | u8 irq; |
| 1668 | |
| 1669 | if (noioapicquirk) |
| 1670 | return; |
| 1671 | |
| 1672 | pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword); |
| 1673 | pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword | |
| 1674 | BC_HT1000_PIC_REGS_ENABLE); |
| 1675 | |
| 1676 | for (irq = 0x10; irq < 0x10 + 32; irq++) { |
| 1677 | outb(irq, BC_HT1000_MAP_IDX); |
| 1678 | outb(0x00, BC_HT1000_MAP_DATA); |
| 1679 | } |
| 1680 | |
| 1681 | pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword); |
| 1682 | |
Bjorn Helgaas | fdcdaf6 | 2009-09-14 14:36:41 -0600 | [diff] [blame] | 1683 | dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", |
| 1684 | dev->vendor, dev->device); |
Olaf Dabrunz | 7725118 | 2008-07-08 15:59:47 +0200 | [diff] [blame] | 1685 | } |
Olaf Dabrunz | 88d1dce | 2008-07-08 15:59:48 +0200 | [diff] [blame] | 1686 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); |
| 1687 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); |
Olaf Dabrunz | 542622d | 2008-07-08 15:59:48 +0200 | [diff] [blame] | 1688 | |
| 1689 | /* |
| 1690 | * disable boot interrupts on AMD and ATI chipsets |
| 1691 | */ |
| 1692 | /* |
| 1693 | * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131 |
| 1694 | * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode |
| 1695 | * (due to an erratum). |
| 1696 | */ |
| 1697 | #define AMD_813X_MISC 0x40 |
| 1698 | #define AMD_813X_NOIOAMODE (1<<0) |
Stefan Assmann | 4fd8bdc | 2009-10-27 08:57:42 +0100 | [diff] [blame] | 1699 | #define AMD_813X_REV_B1 0x12 |
Stefan Assmann | bbe1944 | 2009-02-26 10:46:48 -0800 | [diff] [blame] | 1700 | #define AMD_813X_REV_B2 0x13 |
Olaf Dabrunz | 542622d | 2008-07-08 15:59:48 +0200 | [diff] [blame] | 1701 | |
| 1702 | static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) |
| 1703 | { |
| 1704 | u32 pci_config_dword; |
| 1705 | |
| 1706 | if (noioapicquirk) |
| 1707 | return; |
Stefan Assmann | 4fd8bdc | 2009-10-27 08:57:42 +0100 | [diff] [blame] | 1708 | if ((dev->revision == AMD_813X_REV_B1) || |
| 1709 | (dev->revision == AMD_813X_REV_B2)) |
Stefan Assmann | bbe1944 | 2009-02-26 10:46:48 -0800 | [diff] [blame] | 1710 | return; |
Olaf Dabrunz | 542622d | 2008-07-08 15:59:48 +0200 | [diff] [blame] | 1711 | |
| 1712 | pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); |
| 1713 | pci_config_dword &= ~AMD_813X_NOIOAMODE; |
| 1714 | pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword); |
| 1715 | |
Bjorn Helgaas | fdcdaf6 | 2009-09-14 14:36:41 -0600 | [diff] [blame] | 1716 | dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", |
| 1717 | dev->vendor, dev->device); |
Olaf Dabrunz | 542622d | 2008-07-08 15:59:48 +0200 | [diff] [blame] | 1718 | } |
Stefan Assmann | 4fd8bdc | 2009-10-27 08:57:42 +0100 | [diff] [blame] | 1719 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); |
| 1720 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); |
| 1721 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); |
| 1722 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); |
Olaf Dabrunz | 542622d | 2008-07-08 15:59:48 +0200 | [diff] [blame] | 1723 | |
| 1724 | #define AMD_8111_PCI_IRQ_ROUTING 0x56 |
| 1725 | |
| 1726 | static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) |
| 1727 | { |
| 1728 | u16 pci_config_word; |
| 1729 | |
| 1730 | if (noioapicquirk) |
| 1731 | return; |
| 1732 | |
| 1733 | pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word); |
| 1734 | if (!pci_config_word) { |
Bjorn Helgaas | fdcdaf6 | 2009-09-14 14:36:41 -0600 | [diff] [blame] | 1735 | dev_info(&dev->dev, "boot interrupts on device [%04x:%04x] " |
| 1736 | "already disabled\n", dev->vendor, dev->device); |
Olaf Dabrunz | 542622d | 2008-07-08 15:59:48 +0200 | [diff] [blame] | 1737 | return; |
| 1738 | } |
| 1739 | pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0); |
Bjorn Helgaas | fdcdaf6 | 2009-09-14 14:36:41 -0600 | [diff] [blame] | 1740 | dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", |
| 1741 | dev->vendor, dev->device); |
Olaf Dabrunz | 542622d | 2008-07-08 15:59:48 +0200 | [diff] [blame] | 1742 | } |
Olaf Dabrunz | 88d1dce | 2008-07-08 15:59:48 +0200 | [diff] [blame] | 1743 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); |
| 1744 | DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); |
Stefan Assmann | 426b3b8 | 2008-06-11 16:35:16 +0200 | [diff] [blame] | 1745 | #endif /* CONFIG_X86_IO_APIC */ |
| 1746 | |
Sergei Shtylyov | 33dced2 | 2007-02-07 18:18:45 +0100 | [diff] [blame] | 1747 | /* |
| 1748 | * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size |
| 1749 | * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. |
| 1750 | * Re-allocate the region if needed... |
| 1751 | */ |
| 1752 | static void __init quirk_tc86c001_ide(struct pci_dev *dev) |
| 1753 | { |
| 1754 | struct resource *r = &dev->resource[0]; |
| 1755 | |
| 1756 | if (r->start & 0x8) { |
| 1757 | r->start = 0; |
| 1758 | r->end = 0xf; |
| 1759 | } |
| 1760 | } |
| 1761 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, |
| 1762 | PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE, |
| 1763 | quirk_tc86c001_ide); |
| 1764 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1765 | static void __devinit quirk_netmos(struct pci_dev *dev) |
| 1766 | { |
| 1767 | unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; |
| 1768 | unsigned int num_serial = dev->subsystem_device & 0xf; |
| 1769 | |
| 1770 | /* |
| 1771 | * These Netmos parts are multiport serial devices with optional |
| 1772 | * parallel ports. Even when parallel ports are present, they |
| 1773 | * are identified as class SERIAL, which means the serial driver |
| 1774 | * will claim them. To prevent this, mark them as class OTHER. |
| 1775 | * These combo devices should be claimed by parport_serial. |
| 1776 | * |
| 1777 | * The subdevice ID is of the form 0x00PS, where <P> is the number |
| 1778 | * of parallel ports and <S> is the number of serial ports. |
| 1779 | */ |
| 1780 | switch (dev->device) { |
Jiri Slaby | 4c9c168 | 2008-12-08 16:19:14 +0100 | [diff] [blame] | 1781 | case PCI_DEVICE_ID_NETMOS_9835: |
| 1782 | /* Well, this rule doesn't hold for the following 9835 device */ |
| 1783 | if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && |
| 1784 | dev->subsystem_device == 0x0299) |
| 1785 | return; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1786 | case PCI_DEVICE_ID_NETMOS_9735: |
| 1787 | case PCI_DEVICE_ID_NETMOS_9745: |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1788 | case PCI_DEVICE_ID_NETMOS_9845: |
| 1789 | case PCI_DEVICE_ID_NETMOS_9855: |
| 1790 | if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_SERIAL && |
| 1791 | num_parallel) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1792 | dev_info(&dev->dev, "Netmos %04x (%u parallel, " |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1793 | "%u serial); changing class SERIAL to OTHER " |
| 1794 | "(use parport_serial)\n", |
| 1795 | dev->device, num_parallel, num_serial); |
| 1796 | dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) | |
| 1797 | (dev->class & 0xff); |
| 1798 | } |
| 1799 | } |
| 1800 | } |
| 1801 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos); |
| 1802 | |
Bjorn Helgaas | 16a7474 | 2006-04-05 08:47:00 -0400 | [diff] [blame] | 1803 | static void __devinit quirk_e100_interrupt(struct pci_dev *dev) |
| 1804 | { |
Ivan Kokshaysky | e64aecc | 2007-12-18 00:39:27 +0300 | [diff] [blame] | 1805 | u16 command, pmcsr; |
Bjorn Helgaas | 16a7474 | 2006-04-05 08:47:00 -0400 | [diff] [blame] | 1806 | u8 __iomem *csr; |
| 1807 | u8 cmd_hi; |
Ivan Kokshaysky | e64aecc | 2007-12-18 00:39:27 +0300 | [diff] [blame] | 1808 | int pm; |
Bjorn Helgaas | 16a7474 | 2006-04-05 08:47:00 -0400 | [diff] [blame] | 1809 | |
| 1810 | switch (dev->device) { |
| 1811 | /* PCI IDs taken from drivers/net/e100.c */ |
| 1812 | case 0x1029: |
| 1813 | case 0x1030 ... 0x1034: |
| 1814 | case 0x1038 ... 0x103E: |
| 1815 | case 0x1050 ... 0x1057: |
| 1816 | case 0x1059: |
| 1817 | case 0x1064 ... 0x106B: |
| 1818 | case 0x1091 ... 0x1095: |
| 1819 | case 0x1209: |
| 1820 | case 0x1229: |
| 1821 | case 0x2449: |
| 1822 | case 0x2459: |
| 1823 | case 0x245D: |
| 1824 | case 0x27DC: |
| 1825 | break; |
| 1826 | default: |
| 1827 | return; |
| 1828 | } |
| 1829 | |
| 1830 | /* |
| 1831 | * Some firmware hands off the e100 with interrupts enabled, |
| 1832 | * which can cause a flood of interrupts if packets are |
| 1833 | * received before the driver attaches to the device. So |
| 1834 | * disable all e100 interrupts here. The driver will |
| 1835 | * re-enable them when it's ready. |
| 1836 | */ |
| 1837 | pci_read_config_word(dev, PCI_COMMAND, &command); |
Bjorn Helgaas | 16a7474 | 2006-04-05 08:47:00 -0400 | [diff] [blame] | 1838 | |
Benjamin Herrenschmidt | 1bef7dc | 2007-09-29 09:06:21 +1000 | [diff] [blame] | 1839 | if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0)) |
Bjorn Helgaas | 16a7474 | 2006-04-05 08:47:00 -0400 | [diff] [blame] | 1840 | return; |
| 1841 | |
Ivan Kokshaysky | e64aecc | 2007-12-18 00:39:27 +0300 | [diff] [blame] | 1842 | /* |
| 1843 | * Check that the device is in the D0 power state. If it's not, |
| 1844 | * there is no point to look any further. |
| 1845 | */ |
| 1846 | pm = pci_find_capability(dev, PCI_CAP_ID_PM); |
| 1847 | if (pm) { |
| 1848 | pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); |
| 1849 | if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) |
| 1850 | return; |
| 1851 | } |
| 1852 | |
Benjamin Herrenschmidt | 1bef7dc | 2007-09-29 09:06:21 +1000 | [diff] [blame] | 1853 | /* Convert from PCI bus to resource space. */ |
| 1854 | csr = ioremap(pci_resource_start(dev, 0), 8); |
Bjorn Helgaas | 16a7474 | 2006-04-05 08:47:00 -0400 | [diff] [blame] | 1855 | if (!csr) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1856 | dev_warn(&dev->dev, "Can't map e100 registers\n"); |
Bjorn Helgaas | 16a7474 | 2006-04-05 08:47:00 -0400 | [diff] [blame] | 1857 | return; |
| 1858 | } |
| 1859 | |
| 1860 | cmd_hi = readb(csr + 3); |
| 1861 | if (cmd_hi == 0) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1862 | dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; " |
| 1863 | "disabling\n"); |
Bjorn Helgaas | 16a7474 | 2006-04-05 08:47:00 -0400 | [diff] [blame] | 1864 | writeb(1, csr + 3); |
| 1865 | } |
| 1866 | |
| 1867 | iounmap(csr); |
| 1868 | } |
Marian Balakowicz | 4e68fc9 | 2007-07-03 11:03:18 +0200 | [diff] [blame] | 1869 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt); |
Ivan Kokshaysky | a5312e2 | 2005-11-01 01:43:56 +0300 | [diff] [blame] | 1870 | |
Alexander Duyck | 649426e | 2009-03-05 13:57:28 -0500 | [diff] [blame] | 1871 | /* |
| 1872 | * The 82575 and 82598 may experience data corruption issues when transitioning |
| 1873 | * out of L0S. To prevent this we need to disable L0S on the pci-e link |
| 1874 | */ |
| 1875 | static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev) |
| 1876 | { |
| 1877 | dev_info(&dev->dev, "Disabling L0s\n"); |
| 1878 | pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); |
| 1879 | } |
| 1880 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s); |
| 1881 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s); |
| 1882 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s); |
| 1883 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s); |
| 1884 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s); |
| 1885 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s); |
| 1886 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s); |
| 1887 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s); |
| 1888 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s); |
| 1889 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s); |
| 1890 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s); |
| 1891 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); |
| 1892 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); |
| 1893 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); |
| 1894 | |
Ivan Kokshaysky | a5312e2 | 2005-11-01 01:43:56 +0300 | [diff] [blame] | 1895 | static void __devinit fixup_rev1_53c810(struct pci_dev* dev) |
| 1896 | { |
| 1897 | /* rev 1 ncr53c810 chips don't set the class at all which means |
| 1898 | * they don't get their resources remapped. Fix that here. |
| 1899 | */ |
| 1900 | |
| 1901 | if (dev->class == PCI_CLASS_NOT_DEFINED) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1902 | dev_info(&dev->dev, "NCR 53c810 rev 1 detected; setting PCI class\n"); |
Ivan Kokshaysky | a5312e2 | 2005-11-01 01:43:56 +0300 | [diff] [blame] | 1903 | dev->class = PCI_CLASS_STORAGE_SCSI; |
| 1904 | } |
| 1905 | } |
| 1906 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); |
| 1907 | |
Daniel Yeisley | 9d26512 | 2005-12-05 07:06:43 -0500 | [diff] [blame] | 1908 | /* Enable 1k I/O space granularity on the Intel P64H2 */ |
| 1909 | static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev) |
| 1910 | { |
| 1911 | u16 en1k; |
| 1912 | u8 io_base_lo, io_limit_lo; |
| 1913 | unsigned long base, limit; |
| 1914 | struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES; |
| 1915 | |
| 1916 | pci_read_config_word(dev, 0x40, &en1k); |
| 1917 | |
| 1918 | if (en1k & 0x200) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1919 | dev_info(&dev->dev, "Enable I/O Space to 1KB granularity\n"); |
Daniel Yeisley | 9d26512 | 2005-12-05 07:06:43 -0500 | [diff] [blame] | 1920 | |
| 1921 | pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo); |
| 1922 | pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo); |
| 1923 | base = (io_base_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8; |
| 1924 | limit = (io_limit_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8; |
| 1925 | |
| 1926 | if (base <= limit) { |
| 1927 | res->start = base; |
| 1928 | res->end = limit + 0x3ff; |
| 1929 | } |
| 1930 | } |
| 1931 | } |
| 1932 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io); |
| 1933 | |
Daniel Yeisley | 15a260d | 2006-12-21 14:34:57 -0500 | [diff] [blame] | 1934 | /* Fix the IOBL_ADR for 1k I/O space granularity on the Intel P64H2 |
| 1935 | * The IOBL_ADR gets re-written to 4k boundaries in pci_setup_bridge() |
| 1936 | * in drivers/pci/setup-bus.c |
| 1937 | */ |
| 1938 | static void __devinit quirk_p64h2_1k_io_fix_iobl(struct pci_dev *dev) |
| 1939 | { |
| 1940 | u16 en1k, iobl_adr, iobl_adr_1k; |
| 1941 | struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES; |
| 1942 | |
| 1943 | pci_read_config_word(dev, 0x40, &en1k); |
| 1944 | |
| 1945 | if (en1k & 0x200) { |
| 1946 | pci_read_config_word(dev, PCI_IO_BASE, &iobl_adr); |
| 1947 | |
| 1948 | iobl_adr_1k = iobl_adr | (res->start >> 8) | (res->end & 0xfc00); |
| 1949 | |
| 1950 | if (iobl_adr != iobl_adr_1k) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1951 | dev_info(&dev->dev, "Fixing P64H2 IOBL_ADR from 0x%x to 0x%x for 1KB granularity\n", |
Daniel Yeisley | 15a260d | 2006-12-21 14:34:57 -0500 | [diff] [blame] | 1952 | iobl_adr,iobl_adr_1k); |
| 1953 | pci_write_config_word(dev, PCI_IO_BASE, iobl_adr_1k); |
| 1954 | } |
| 1955 | } |
| 1956 | } |
| 1957 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io_fix_iobl); |
| 1958 | |
Brice Goglin | cf34a8e | 2006-06-13 14:35:42 -0400 | [diff] [blame] | 1959 | /* Under some circumstances, AER is not linked with extended capabilities. |
| 1960 | * Force it to be linked by setting the corresponding control bit in the |
| 1961 | * config space. |
| 1962 | */ |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 1963 | static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) |
Brice Goglin | cf34a8e | 2006-06-13 14:35:42 -0400 | [diff] [blame] | 1964 | { |
| 1965 | uint8_t b; |
| 1966 | if (pci_read_config_byte(dev, 0xf41, &b) == 0) { |
| 1967 | if (!(b & 0x20)) { |
| 1968 | pci_write_config_byte(dev, 0xf41, b | 0x20); |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 1969 | dev_info(&dev->dev, |
| 1970 | "Linking AER extended capability\n"); |
Brice Goglin | cf34a8e | 2006-06-13 14:35:42 -0400 | [diff] [blame] | 1971 | } |
| 1972 | } |
| 1973 | } |
| 1974 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, |
| 1975 | quirk_nvidia_ck804_pcie_aer_ext_cap); |
Rafael J. Wysocki | e1a2a51 | 2008-05-15 21:51:31 +0200 | [diff] [blame] | 1976 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, |
Alan Cox | 1597cac | 2006-12-04 15:14:45 -0800 | [diff] [blame] | 1977 | quirk_nvidia_ck804_pcie_aer_ext_cap); |
Brice Goglin | cf34a8e | 2006-06-13 14:35:42 -0400 | [diff] [blame] | 1978 | |
Tim Yamin | 53a9bf4 | 2007-11-01 23:14:54 +0000 | [diff] [blame] | 1979 | static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) |
| 1980 | { |
| 1981 | /* |
| 1982 | * Disable PCI Bus Parking and PCI Master read caching on CX700 |
| 1983 | * which causes unspecified timing errors with a VT6212L on the PCI |
Tim Yamin | ca84639 | 2010-03-19 14:22:58 -0700 | [diff] [blame] | 1984 | * bus leading to USB2.0 packet loss. |
| 1985 | * |
| 1986 | * This quirk is only enabled if a second (on the external PCI bus) |
| 1987 | * VT6212L is found -- the CX700 core itself also contains a USB |
| 1988 | * host controller with the same PCI ID as the VT6212L. |
Tim Yamin | 53a9bf4 | 2007-11-01 23:14:54 +0000 | [diff] [blame] | 1989 | */ |
| 1990 | |
Tim Yamin | ca84639 | 2010-03-19 14:22:58 -0700 | [diff] [blame] | 1991 | /* Count VT6212L instances */ |
| 1992 | struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA, |
| 1993 | PCI_DEVICE_ID_VIA_8235_USB_2, NULL); |
Tim Yamin | 53a9bf4 | 2007-11-01 23:14:54 +0000 | [diff] [blame] | 1994 | uint8_t b; |
Tim Yamin | ca84639 | 2010-03-19 14:22:58 -0700 | [diff] [blame] | 1995 | |
| 1996 | /* p should contain the first (internal) VT6212L -- see if we have |
| 1997 | an external one by searching again */ |
| 1998 | p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p); |
| 1999 | if (!p) |
| 2000 | return; |
| 2001 | pci_dev_put(p); |
| 2002 | |
Tim Yamin | 53a9bf4 | 2007-11-01 23:14:54 +0000 | [diff] [blame] | 2003 | if (pci_read_config_byte(dev, 0x76, &b) == 0) { |
| 2004 | if (b & 0x40) { |
| 2005 | /* Turn off PCI Bus Parking */ |
| 2006 | pci_write_config_byte(dev, 0x76, b ^ 0x40); |
| 2007 | |
Tim Yamin | bc04327 | 2008-03-30 20:58:59 +0100 | [diff] [blame] | 2008 | dev_info(&dev->dev, |
| 2009 | "Disabling VIA CX700 PCI parking\n"); |
| 2010 | } |
| 2011 | } |
| 2012 | |
| 2013 | if (pci_read_config_byte(dev, 0x72, &b) == 0) { |
| 2014 | if (b != 0) { |
Tim Yamin | 53a9bf4 | 2007-11-01 23:14:54 +0000 | [diff] [blame] | 2015 | /* Turn off PCI Master read caching */ |
| 2016 | pci_write_config_byte(dev, 0x72, 0x0); |
Tim Yamin | bc04327 | 2008-03-30 20:58:59 +0100 | [diff] [blame] | 2017 | |
| 2018 | /* Set PCI Master Bus time-out to "1x16 PCLK" */ |
Tim Yamin | 53a9bf4 | 2007-11-01 23:14:54 +0000 | [diff] [blame] | 2019 | pci_write_config_byte(dev, 0x75, 0x1); |
Tim Yamin | bc04327 | 2008-03-30 20:58:59 +0100 | [diff] [blame] | 2020 | |
| 2021 | /* Disable "Read FIFO Timer" */ |
Tim Yamin | 53a9bf4 | 2007-11-01 23:14:54 +0000 | [diff] [blame] | 2022 | pci_write_config_byte(dev, 0x77, 0x0); |
| 2023 | |
Bjorn Helgaas | d6505a5 | 2008-02-29 16:12:18 -0700 | [diff] [blame] | 2024 | dev_info(&dev->dev, |
Tim Yamin | bc04327 | 2008-03-30 20:58:59 +0100 | [diff] [blame] | 2025 | "Disabling VIA CX700 PCI caching\n"); |
Tim Yamin | 53a9bf4 | 2007-11-01 23:14:54 +0000 | [diff] [blame] | 2026 | } |
| 2027 | } |
| 2028 | } |
Tim Yamin | ca84639 | 2010-03-19 14:22:58 -0700 | [diff] [blame] | 2029 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); |
Tim Yamin | 53a9bf4 | 2007-11-01 23:14:54 +0000 | [diff] [blame] | 2030 | |
Benjamin Li | 99cb233d | 2008-07-02 10:59:04 -0700 | [diff] [blame] | 2031 | /* |
| 2032 | * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the |
| 2033 | * VPD end tag will hang the device. This problem was initially |
| 2034 | * observed when a vpd entry was created in sysfs |
| 2035 | * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry |
| 2036 | * will dump 32k of data. Reading a full 32k will cause an access |
| 2037 | * beyond the VPD end tag causing the device to hang. Once the device |
| 2038 | * is hung, the bnx2 driver will not be able to reset the device. |
| 2039 | * We believe that it is legal to read beyond the end tag and |
| 2040 | * therefore the solution is to limit the read/write length. |
| 2041 | */ |
| 2042 | static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev) |
| 2043 | { |
Eric Dumazet | 9d82d8e | 2008-07-31 20:27:31 +0200 | [diff] [blame] | 2044 | /* |
Dean Hildebrand | 35405f2 | 2008-08-07 17:31:45 -0700 | [diff] [blame] | 2045 | * Only disable the VPD capability for 5706, 5706S, 5708, |
| 2046 | * 5708S and 5709 rev. A |
Eric Dumazet | 9d82d8e | 2008-07-31 20:27:31 +0200 | [diff] [blame] | 2047 | */ |
Benjamin Li | 99cb233d | 2008-07-02 10:59:04 -0700 | [diff] [blame] | 2048 | if ((dev->device == PCI_DEVICE_ID_NX2_5706) || |
Dean Hildebrand | 35405f2 | 2008-08-07 17:31:45 -0700 | [diff] [blame] | 2049 | (dev->device == PCI_DEVICE_ID_NX2_5706S) || |
Benjamin Li | 99cb233d | 2008-07-02 10:59:04 -0700 | [diff] [blame] | 2050 | (dev->device == PCI_DEVICE_ID_NX2_5708) || |
Eric Dumazet | 9d82d8e | 2008-07-31 20:27:31 +0200 | [diff] [blame] | 2051 | (dev->device == PCI_DEVICE_ID_NX2_5708S) || |
Benjamin Li | 99cb233d | 2008-07-02 10:59:04 -0700 | [diff] [blame] | 2052 | ((dev->device == PCI_DEVICE_ID_NX2_5709) && |
| 2053 | (dev->revision & 0xf0) == 0x0)) { |
| 2054 | if (dev->vpd) |
| 2055 | dev->vpd->len = 0x80; |
| 2056 | } |
| 2057 | } |
| 2058 | |
Yu Zhao | bffadff | 2008-10-28 14:44:11 +0800 | [diff] [blame] | 2059 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| 2060 | PCI_DEVICE_ID_NX2_5706, |
| 2061 | quirk_brcm_570x_limit_vpd); |
| 2062 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| 2063 | PCI_DEVICE_ID_NX2_5706S, |
| 2064 | quirk_brcm_570x_limit_vpd); |
| 2065 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| 2066 | PCI_DEVICE_ID_NX2_5708, |
| 2067 | quirk_brcm_570x_limit_vpd); |
| 2068 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| 2069 | PCI_DEVICE_ID_NX2_5708S, |
| 2070 | quirk_brcm_570x_limit_vpd); |
| 2071 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| 2072 | PCI_DEVICE_ID_NX2_5709, |
| 2073 | quirk_brcm_570x_limit_vpd); |
| 2074 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| 2075 | PCI_DEVICE_ID_NX2_5709S, |
| 2076 | quirk_brcm_570x_limit_vpd); |
Benjamin Li | 99cb233d | 2008-07-02 10:59:04 -0700 | [diff] [blame] | 2077 | |
Michal Miroslaw | 26c56dc | 2009-05-12 13:49:26 -0700 | [diff] [blame] | 2078 | /* Originally in EDAC sources for i82875P: |
| 2079 | * Intel tells BIOS developers to hide device 6 which |
| 2080 | * configures the overflow device access containing |
| 2081 | * the DRBs - this is where we expose device 6. |
| 2082 | * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm |
| 2083 | */ |
| 2084 | static void __devinit quirk_unhide_mch_dev6(struct pci_dev *dev) |
| 2085 | { |
| 2086 | u8 reg; |
| 2087 | |
| 2088 | if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) { |
| 2089 | dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n"); |
| 2090 | pci_write_config_byte(dev, 0xF4, reg | 0x02); |
| 2091 | } |
| 2092 | } |
| 2093 | |
| 2094 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, |
| 2095 | quirk_unhide_mch_dev6); |
| 2096 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, |
| 2097 | quirk_unhide_mch_dev6); |
| 2098 | |
| 2099 | |
Brice Goglin | 3f79e10 | 2006-08-31 01:54:56 -0400 | [diff] [blame] | 2100 | #ifdef CONFIG_PCI_MSI |
Tejun Heo | ebdf7d3 | 2007-05-31 00:40:48 -0700 | [diff] [blame] | 2101 | /* Some chipsets do not support MSI. We cannot easily rely on setting |
| 2102 | * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually |
| 2103 | * some other busses controlled by the chipset even if Linux is not |
| 2104 | * aware of it. Instead of setting the flag on all busses in the |
| 2105 | * machine, simply disable MSI globally. |
Brice Goglin | 3f79e10 | 2006-08-31 01:54:56 -0400 | [diff] [blame] | 2106 | */ |
Tejun Heo | ebdf7d3 | 2007-05-31 00:40:48 -0700 | [diff] [blame] | 2107 | static void __init quirk_disable_all_msi(struct pci_dev *dev) |
Brice Goglin | 3f79e10 | 2006-08-31 01:54:56 -0400 | [diff] [blame] | 2108 | { |
Michael Ellerman | 88187df | 2007-01-25 19:34:07 +1100 | [diff] [blame] | 2109 | pci_no_msi(); |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 2110 | dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n"); |
Brice Goglin | 3f79e10 | 2006-08-31 01:54:56 -0400 | [diff] [blame] | 2111 | } |
Tejun Heo | ebdf7d3 | 2007-05-31 00:40:48 -0700 | [diff] [blame] | 2112 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi); |
| 2113 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi); |
| 2114 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); |
Tejun Heo | 66d715c | 2008-07-04 09:59:32 -0700 | [diff] [blame] | 2115 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi); |
Jay Cliburn | 184b812 | 2007-05-26 17:01:04 -0500 | [diff] [blame] | 2116 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); |
Thomas Renninger | 162dedd | 2009-04-03 06:34:00 -0700 | [diff] [blame] | 2117 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi); |
Brice Goglin | 3f79e10 | 2006-08-31 01:54:56 -0400 | [diff] [blame] | 2118 | |
| 2119 | /* Disable MSI on chipsets that are known to not support it */ |
| 2120 | static void __devinit quirk_disable_msi(struct pci_dev *dev) |
| 2121 | { |
| 2122 | if (dev->subordinate) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 2123 | dev_warn(&dev->dev, "MSI quirk detected; " |
| 2124 | "subordinate MSI disabled\n"); |
Brice Goglin | 3f79e10 | 2006-08-31 01:54:56 -0400 | [diff] [blame] | 2125 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; |
| 2126 | } |
| 2127 | } |
| 2128 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi); |
Clemens Ladisch | 5193d7a | 2010-04-02 18:46:06 +0200 | [diff] [blame] | 2129 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9602, quirk_disable_msi); |
| 2130 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASUSTEK, 0x9602, quirk_disable_msi); |
| 2131 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AI, 0x9602, quirk_disable_msi); |
Matthew Wilcox | 134b345 | 2010-03-24 07:11:01 -0600 | [diff] [blame] | 2132 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi); |
Alex Deucher | 9313ff4 | 2010-05-18 10:42:53 -0400 | [diff] [blame] | 2133 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi); |
Brice Goglin | 6397c75 | 2006-08-31 01:55:32 -0400 | [diff] [blame] | 2134 | |
| 2135 | /* Go through the list of Hypertransport capabilities and |
| 2136 | * return 1 if a HT MSI capability is found and enabled */ |
| 2137 | static int __devinit msi_ht_cap_enabled(struct pci_dev *dev) |
| 2138 | { |
Michael Ellerman | 7a38050 | 2006-11-22 18:26:21 +1100 | [diff] [blame] | 2139 | int pos, ttl = 48; |
| 2140 | |
| 2141 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); |
| 2142 | while (pos && ttl--) { |
| 2143 | u8 flags; |
| 2144 | |
| 2145 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, |
| 2146 | &flags) == 0) |
| 2147 | { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 2148 | dev_info(&dev->dev, "Found %s HT MSI Mapping\n", |
Michael Ellerman | 7a38050 | 2006-11-22 18:26:21 +1100 | [diff] [blame] | 2149 | flags & HT_MSI_FLAGS_ENABLE ? |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 2150 | "enabled" : "disabled"); |
Michael Ellerman | 7a38050 | 2006-11-22 18:26:21 +1100 | [diff] [blame] | 2151 | return (flags & HT_MSI_FLAGS_ENABLE) != 0; |
Brice Goglin | 6397c75 | 2006-08-31 01:55:32 -0400 | [diff] [blame] | 2152 | } |
Michael Ellerman | 7a38050 | 2006-11-22 18:26:21 +1100 | [diff] [blame] | 2153 | |
| 2154 | pos = pci_find_next_ht_capability(dev, pos, |
| 2155 | HT_CAPTYPE_MSI_MAPPING); |
Brice Goglin | 6397c75 | 2006-08-31 01:55:32 -0400 | [diff] [blame] | 2156 | } |
| 2157 | return 0; |
| 2158 | } |
| 2159 | |
| 2160 | /* Check the hypertransport MSI mapping to know whether MSI is enabled or not */ |
| 2161 | static void __devinit quirk_msi_ht_cap(struct pci_dev *dev) |
| 2162 | { |
| 2163 | if (dev->subordinate && !msi_ht_cap_enabled(dev)) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 2164 | dev_warn(&dev->dev, "MSI quirk detected; " |
| 2165 | "subordinate MSI disabled\n"); |
Brice Goglin | 6397c75 | 2006-08-31 01:55:32 -0400 | [diff] [blame] | 2166 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; |
| 2167 | } |
| 2168 | } |
| 2169 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, |
| 2170 | quirk_msi_ht_cap); |
Sebastien Dugue | 6bae1d9 | 2007-12-13 16:09:25 -0800 | [diff] [blame] | 2171 | |
Brice Goglin | 6397c75 | 2006-08-31 01:55:32 -0400 | [diff] [blame] | 2172 | /* The nVidia CK804 chipset may have 2 HT MSI mappings. |
| 2173 | * MSI are supported if the MSI capability set in any of these mappings. |
| 2174 | */ |
| 2175 | static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) |
| 2176 | { |
| 2177 | struct pci_dev *pdev; |
| 2178 | |
| 2179 | if (!dev->subordinate) |
| 2180 | return; |
| 2181 | |
| 2182 | /* check HT MSI cap on this chipset and the root one. |
| 2183 | * a single one having MSI is enough to be sure that MSI are supported. |
| 2184 | */ |
Alan Cox | 11f242f | 2006-10-10 14:39:00 -0700 | [diff] [blame] | 2185 | pdev = pci_get_slot(dev->bus, 0); |
Jesper Juhl | 9ac0ce8 | 2006-12-04 15:14:48 -0800 | [diff] [blame] | 2186 | if (!pdev) |
| 2187 | return; |
David Rientjes | 0c875c2 | 2006-12-03 11:55:34 -0800 | [diff] [blame] | 2188 | if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) { |
bjorn.helgaas@hp.com | f0fda80 | 2007-12-17 14:09:39 -0700 | [diff] [blame] | 2189 | dev_warn(&dev->dev, "MSI quirk detected; " |
| 2190 | "subordinate MSI disabled\n"); |
Brice Goglin | 6397c75 | 2006-08-31 01:55:32 -0400 | [diff] [blame] | 2191 | dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; |
| 2192 | } |
Alan Cox | 11f242f | 2006-10-10 14:39:00 -0700 | [diff] [blame] | 2193 | pci_dev_put(pdev); |
Brice Goglin | 6397c75 | 2006-08-31 01:55:32 -0400 | [diff] [blame] | 2194 | } |
| 2195 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, |
| 2196 | quirk_nvidia_ck804_msi_ht_cap); |
David Miller | ba698ad | 2007-10-25 01:16:30 -0700 | [diff] [blame] | 2197 | |
Bjorn Helgaas | 415b6d0 | 2008-02-29 16:04:39 -0700 | [diff] [blame] | 2198 | /* Force enable MSI mapping capability on HT bridges */ |
| 2199 | static void __devinit ht_enable_msi_mapping(struct pci_dev *dev) |
Peer Chen | 9dc625e | 2008-02-04 23:50:13 -0800 | [diff] [blame] | 2200 | { |
| 2201 | int pos, ttl = 48; |
| 2202 | |
| 2203 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); |
| 2204 | while (pos && ttl--) { |
| 2205 | u8 flags; |
| 2206 | |
| 2207 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, |
| 2208 | &flags) == 0) { |
| 2209 | dev_info(&dev->dev, "Enabling HT MSI Mapping\n"); |
| 2210 | |
| 2211 | pci_write_config_byte(dev, pos + HT_MSI_FLAGS, |
| 2212 | flags | HT_MSI_FLAGS_ENABLE); |
| 2213 | } |
| 2214 | pos = pci_find_next_ht_capability(dev, pos, |
| 2215 | HT_CAPTYPE_MSI_MAPPING); |
| 2216 | } |
| 2217 | } |
Bjorn Helgaas | 415b6d0 | 2008-02-29 16:04:39 -0700 | [diff] [blame] | 2218 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, |
| 2219 | PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, |
| 2220 | ht_enable_msi_mapping); |
Peer Chen | 9dc625e | 2008-02-04 23:50:13 -0800 | [diff] [blame] | 2221 | |
Yinghai Lu | e0ae4f5 | 2009-02-17 20:40:09 -0800 | [diff] [blame] | 2222 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, |
| 2223 | ht_enable_msi_mapping); |
| 2224 | |
Ben Hutchings | e4146bb | 2010-05-16 02:28:49 +0100 | [diff] [blame] | 2225 | /* The P5N32-SLI motherboards from Asus have a problem with msi |
Andreas Petlund | 75e07fc | 2008-11-20 20:42:25 -0800 | [diff] [blame] | 2226 | * for the MCP55 NIC. It is not yet determined whether the msi problem |
| 2227 | * also affects other devices. As for now, turn off msi for this device. |
| 2228 | */ |
| 2229 | static void __devinit nvenet_msi_disable(struct pci_dev *dev) |
| 2230 | { |
Ben Hutchings | e4146bb | 2010-05-16 02:28:49 +0100 | [diff] [blame] | 2231 | if (dmi_name_in_vendors("P5N32-SLI PREMIUM") || |
| 2232 | dmi_name_in_vendors("P5N32-E SLI")) { |
Andreas Petlund | 75e07fc | 2008-11-20 20:42:25 -0800 | [diff] [blame] | 2233 | dev_info(&dev->dev, |
Ben Hutchings | e4146bb | 2010-05-16 02:28:49 +0100 | [diff] [blame] | 2234 | "Disabling msi for MCP55 NIC on P5N32-SLI\n"); |
Andreas Petlund | 75e07fc | 2008-11-20 20:42:25 -0800 | [diff] [blame] | 2235 | dev->no_msi = 1; |
| 2236 | } |
| 2237 | } |
| 2238 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, |
| 2239 | PCI_DEVICE_ID_NVIDIA_NVENET_15, |
| 2240 | nvenet_msi_disable); |
| 2241 | |
Yinghai Lu | de74530 | 2009-03-20 19:29:41 -0700 | [diff] [blame] | 2242 | static int __devinit ht_check_msi_mapping(struct pci_dev *dev) |
| 2243 | { |
| 2244 | int pos, ttl = 48; |
| 2245 | int found = 0; |
| 2246 | |
| 2247 | /* check if there is HT MSI cap or enabled on this device */ |
| 2248 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); |
| 2249 | while (pos && ttl--) { |
| 2250 | u8 flags; |
| 2251 | |
| 2252 | if (found < 1) |
| 2253 | found = 1; |
| 2254 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, |
| 2255 | &flags) == 0) { |
| 2256 | if (flags & HT_MSI_FLAGS_ENABLE) { |
| 2257 | if (found < 2) { |
| 2258 | found = 2; |
| 2259 | break; |
| 2260 | } |
| 2261 | } |
| 2262 | } |
| 2263 | pos = pci_find_next_ht_capability(dev, pos, |
| 2264 | HT_CAPTYPE_MSI_MAPPING); |
| 2265 | } |
| 2266 | |
| 2267 | return found; |
| 2268 | } |
| 2269 | |
| 2270 | static int __devinit host_bridge_with_leaf(struct pci_dev *host_bridge) |
| 2271 | { |
| 2272 | struct pci_dev *dev; |
| 2273 | int pos; |
| 2274 | int i, dev_no; |
| 2275 | int found = 0; |
| 2276 | |
| 2277 | dev_no = host_bridge->devfn >> 3; |
| 2278 | for (i = dev_no + 1; i < 0x20; i++) { |
| 2279 | dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0)); |
| 2280 | if (!dev) |
| 2281 | continue; |
| 2282 | |
| 2283 | /* found next host bridge ?*/ |
| 2284 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); |
| 2285 | if (pos != 0) { |
| 2286 | pci_dev_put(dev); |
| 2287 | break; |
| 2288 | } |
| 2289 | |
| 2290 | if (ht_check_msi_mapping(dev)) { |
| 2291 | found = 1; |
| 2292 | pci_dev_put(dev); |
| 2293 | break; |
| 2294 | } |
| 2295 | pci_dev_put(dev); |
| 2296 | } |
| 2297 | |
| 2298 | return found; |
| 2299 | } |
| 2300 | |
Yinghai Lu | eeafda7 | 2009-03-29 12:30:05 -0700 | [diff] [blame] | 2301 | #define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */ |
| 2302 | #define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */ |
| 2303 | |
| 2304 | static int __devinit is_end_of_ht_chain(struct pci_dev *dev) |
| 2305 | { |
| 2306 | int pos, ctrl_off; |
| 2307 | int end = 0; |
| 2308 | u16 flags, ctrl; |
| 2309 | |
| 2310 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); |
| 2311 | |
| 2312 | if (!pos) |
| 2313 | goto out; |
| 2314 | |
| 2315 | pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags); |
| 2316 | |
| 2317 | ctrl_off = ((flags >> 10) & 1) ? |
| 2318 | PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1; |
| 2319 | pci_read_config_word(dev, pos + ctrl_off, &ctrl); |
| 2320 | |
| 2321 | if (ctrl & (1 << 6)) |
| 2322 | end = 1; |
| 2323 | |
| 2324 | out: |
| 2325 | return end; |
| 2326 | } |
| 2327 | |
Yinghai Lu | 1dec6b0 | 2009-02-23 11:51:59 -0800 | [diff] [blame] | 2328 | static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev) |
| 2329 | { |
| 2330 | struct pci_dev *host_bridge; |
| 2331 | int pos; |
| 2332 | int i, dev_no; |
| 2333 | int found = 0; |
| 2334 | |
| 2335 | dev_no = dev->devfn >> 3; |
| 2336 | for (i = dev_no; i >= 0; i--) { |
| 2337 | host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0)); |
| 2338 | if (!host_bridge) |
| 2339 | continue; |
| 2340 | |
| 2341 | pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); |
| 2342 | if (pos != 0) { |
| 2343 | found = 1; |
| 2344 | break; |
| 2345 | } |
| 2346 | pci_dev_put(host_bridge); |
| 2347 | } |
| 2348 | |
| 2349 | if (!found) |
| 2350 | return; |
| 2351 | |
Yinghai Lu | eeafda7 | 2009-03-29 12:30:05 -0700 | [diff] [blame] | 2352 | /* don't enable end_device/host_bridge with leaf directly here */ |
| 2353 | if (host_bridge == dev && is_end_of_ht_chain(host_bridge) && |
| 2354 | host_bridge_with_leaf(host_bridge)) |
Yinghai Lu | de74530 | 2009-03-20 19:29:41 -0700 | [diff] [blame] | 2355 | goto out; |
| 2356 | |
Yinghai Lu | 1dec6b0 | 2009-02-23 11:51:59 -0800 | [diff] [blame] | 2357 | /* root did that ! */ |
| 2358 | if (msi_ht_cap_enabled(host_bridge)) |
| 2359 | goto out; |
| 2360 | |
| 2361 | ht_enable_msi_mapping(dev); |
| 2362 | |
| 2363 | out: |
| 2364 | pci_dev_put(host_bridge); |
| 2365 | } |
| 2366 | |
| 2367 | static void __devinit ht_disable_msi_mapping(struct pci_dev *dev) |
| 2368 | { |
| 2369 | int pos, ttl = 48; |
| 2370 | |
| 2371 | pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); |
| 2372 | while (pos && ttl--) { |
| 2373 | u8 flags; |
| 2374 | |
| 2375 | if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, |
| 2376 | &flags) == 0) { |
Prakash Punnoor | 6a958d5 | 2009-03-06 10:10:35 +0100 | [diff] [blame] | 2377 | dev_info(&dev->dev, "Disabling HT MSI Mapping\n"); |
Yinghai Lu | 1dec6b0 | 2009-02-23 11:51:59 -0800 | [diff] [blame] | 2378 | |
| 2379 | pci_write_config_byte(dev, pos + HT_MSI_FLAGS, |
| 2380 | flags & ~HT_MSI_FLAGS_ENABLE); |
| 2381 | } |
| 2382 | pos = pci_find_next_ht_capability(dev, pos, |
| 2383 | HT_CAPTYPE_MSI_MAPPING); |
| 2384 | } |
| 2385 | } |
| 2386 | |
Yinghai Lu | de74530 | 2009-03-20 19:29:41 -0700 | [diff] [blame] | 2387 | static void __devinit __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all) |
Peer Chen | 9dc625e | 2008-02-04 23:50:13 -0800 | [diff] [blame] | 2388 | { |
| 2389 | struct pci_dev *host_bridge; |
Yinghai Lu | 1dec6b0 | 2009-02-23 11:51:59 -0800 | [diff] [blame] | 2390 | int pos; |
| 2391 | int found; |
| 2392 | |
| 2393 | /* check if there is HT MSI cap or enabled on this device */ |
| 2394 | found = ht_check_msi_mapping(dev); |
| 2395 | |
| 2396 | /* no HT MSI CAP */ |
| 2397 | if (found == 0) |
| 2398 | return; |
Peer Chen | 9dc625e | 2008-02-04 23:50:13 -0800 | [diff] [blame] | 2399 | |
| 2400 | /* |
| 2401 | * HT MSI mapping should be disabled on devices that are below |
| 2402 | * a non-Hypertransport host bridge. Locate the host bridge... |
| 2403 | */ |
| 2404 | host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); |
| 2405 | if (host_bridge == NULL) { |
| 2406 | dev_warn(&dev->dev, |
| 2407 | "nv_msi_ht_cap_quirk didn't locate host bridge\n"); |
| 2408 | return; |
| 2409 | } |
| 2410 | |
| 2411 | pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); |
| 2412 | if (pos != 0) { |
| 2413 | /* Host bridge is to HT */ |
Yinghai Lu | 1dec6b0 | 2009-02-23 11:51:59 -0800 | [diff] [blame] | 2414 | if (found == 1) { |
| 2415 | /* it is not enabled, try to enable it */ |
Yinghai Lu | de74530 | 2009-03-20 19:29:41 -0700 | [diff] [blame] | 2416 | if (all) |
| 2417 | ht_enable_msi_mapping(dev); |
| 2418 | else |
| 2419 | nv_ht_enable_msi_mapping(dev); |
Yinghai Lu | 1dec6b0 | 2009-02-23 11:51:59 -0800 | [diff] [blame] | 2420 | } |
Peer Chen | 9dc625e | 2008-02-04 23:50:13 -0800 | [diff] [blame] | 2421 | return; |
| 2422 | } |
| 2423 | |
Yinghai Lu | 1dec6b0 | 2009-02-23 11:51:59 -0800 | [diff] [blame] | 2424 | /* HT MSI is not enabled */ |
| 2425 | if (found == 1) |
| 2426 | return; |
Peer Chen | 9dc625e | 2008-02-04 23:50:13 -0800 | [diff] [blame] | 2427 | |
Yinghai Lu | 1dec6b0 | 2009-02-23 11:51:59 -0800 | [diff] [blame] | 2428 | /* Host bridge is not to HT, disable HT MSI mapping on this device */ |
| 2429 | ht_disable_msi_mapping(dev); |
Peer Chen | 9dc625e | 2008-02-04 23:50:13 -0800 | [diff] [blame] | 2430 | } |
Yinghai Lu | de74530 | 2009-03-20 19:29:41 -0700 | [diff] [blame] | 2431 | |
| 2432 | static void __devinit nv_msi_ht_cap_quirk_all(struct pci_dev *dev) |
| 2433 | { |
| 2434 | return __nv_msi_ht_cap_quirk(dev, 1); |
| 2435 | } |
| 2436 | |
| 2437 | static void __devinit nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev) |
| 2438 | { |
| 2439 | return __nv_msi_ht_cap_quirk(dev, 0); |
| 2440 | } |
| 2441 | |
| 2442 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); |
Tejun Heo | 6dab62e | 2009-07-21 16:08:43 -0700 | [diff] [blame] | 2443 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); |
Yinghai Lu | de74530 | 2009-03-20 19:29:41 -0700 | [diff] [blame] | 2444 | |
| 2445 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); |
Tejun Heo | 6dab62e | 2009-07-21 16:08:43 -0700 | [diff] [blame] | 2446 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); |
Peer Chen | 9dc625e | 2008-02-04 23:50:13 -0800 | [diff] [blame] | 2447 | |
David Miller | ba698ad | 2007-10-25 01:16:30 -0700 | [diff] [blame] | 2448 | static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev) |
| 2449 | { |
| 2450 | dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; |
| 2451 | } |
Shane Huang | 4600c9d | 2008-01-25 15:46:24 +0900 | [diff] [blame] | 2452 | static void __devinit quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) |
| 2453 | { |
| 2454 | struct pci_dev *p; |
| 2455 | |
| 2456 | /* SB700 MSI issue will be fixed at HW level from revision A21, |
| 2457 | * we need check PCI REVISION ID of SMBus controller to get SB700 |
| 2458 | * revision. |
| 2459 | */ |
| 2460 | p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, |
| 2461 | NULL); |
| 2462 | if (!p) |
| 2463 | return; |
| 2464 | |
| 2465 | if ((p->revision < 0x3B) && (p->revision >= 0x30)) |
| 2466 | dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; |
| 2467 | pci_dev_put(p); |
| 2468 | } |
David Miller | ba698ad | 2007-10-25 01:16:30 -0700 | [diff] [blame] | 2469 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| 2470 | PCI_DEVICE_ID_TIGON3_5780, |
| 2471 | quirk_msi_intx_disable_bug); |
| 2472 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| 2473 | PCI_DEVICE_ID_TIGON3_5780S, |
| 2474 | quirk_msi_intx_disable_bug); |
| 2475 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| 2476 | PCI_DEVICE_ID_TIGON3_5714, |
| 2477 | quirk_msi_intx_disable_bug); |
| 2478 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| 2479 | PCI_DEVICE_ID_TIGON3_5714S, |
| 2480 | quirk_msi_intx_disable_bug); |
| 2481 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| 2482 | PCI_DEVICE_ID_TIGON3_5715, |
| 2483 | quirk_msi_intx_disable_bug); |
| 2484 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| 2485 | PCI_DEVICE_ID_TIGON3_5715S, |
| 2486 | quirk_msi_intx_disable_bug); |
| 2487 | |
David Miller | bc38b41 | 2007-10-25 01:16:52 -0700 | [diff] [blame] | 2488 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390, |
Shane Huang | 4600c9d | 2008-01-25 15:46:24 +0900 | [diff] [blame] | 2489 | quirk_msi_intx_disable_ati_bug); |
David Miller | bc38b41 | 2007-10-25 01:16:52 -0700 | [diff] [blame] | 2490 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391, |
Shane Huang | 4600c9d | 2008-01-25 15:46:24 +0900 | [diff] [blame] | 2491 | quirk_msi_intx_disable_ati_bug); |
David Miller | bc38b41 | 2007-10-25 01:16:52 -0700 | [diff] [blame] | 2492 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392, |
Shane Huang | 4600c9d | 2008-01-25 15:46:24 +0900 | [diff] [blame] | 2493 | quirk_msi_intx_disable_ati_bug); |
David Miller | bc38b41 | 2007-10-25 01:16:52 -0700 | [diff] [blame] | 2494 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393, |
Shane Huang | 4600c9d | 2008-01-25 15:46:24 +0900 | [diff] [blame] | 2495 | quirk_msi_intx_disable_ati_bug); |
David Miller | bc38b41 | 2007-10-25 01:16:52 -0700 | [diff] [blame] | 2496 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394, |
Shane Huang | 4600c9d | 2008-01-25 15:46:24 +0900 | [diff] [blame] | 2497 | quirk_msi_intx_disable_ati_bug); |
David Miller | bc38b41 | 2007-10-25 01:16:52 -0700 | [diff] [blame] | 2498 | |
| 2499 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373, |
| 2500 | quirk_msi_intx_disable_bug); |
| 2501 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374, |
| 2502 | quirk_msi_intx_disable_bug); |
| 2503 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375, |
| 2504 | quirk_msi_intx_disable_bug); |
| 2505 | |
Brice Goglin | 3f79e10 | 2006-08-31 01:54:56 -0400 | [diff] [blame] | 2506 | #endif /* CONFIG_PCI_MSI */ |
Thomas Petazzoni | 3d13731 | 2008-08-19 10:28:24 +0200 | [diff] [blame] | 2507 | |
Yu Zhao | 7eb93b1 | 2009-04-03 15:18:11 +0800 | [diff] [blame] | 2508 | #ifdef CONFIG_PCI_IOV |
| 2509 | |
| 2510 | /* |
| 2511 | * For Intel 82576 SR-IOV NIC, if BIOS doesn't allocate resources for the |
| 2512 | * SR-IOV BARs, zero the Flash BAR and program the SR-IOV BARs to use the |
| 2513 | * old Flash Memory Space. |
| 2514 | */ |
| 2515 | static void __devinit quirk_i82576_sriov(struct pci_dev *dev) |
| 2516 | { |
| 2517 | int pos, flags; |
| 2518 | u32 bar, start, size; |
| 2519 | |
| 2520 | if (PAGE_SIZE > 0x10000) |
| 2521 | return; |
| 2522 | |
| 2523 | flags = pci_resource_flags(dev, 0); |
| 2524 | if ((flags & PCI_BASE_ADDRESS_SPACE) != |
| 2525 | PCI_BASE_ADDRESS_SPACE_MEMORY || |
| 2526 | (flags & PCI_BASE_ADDRESS_MEM_TYPE_MASK) != |
| 2527 | PCI_BASE_ADDRESS_MEM_TYPE_32) |
| 2528 | return; |
| 2529 | |
| 2530 | pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); |
| 2531 | if (!pos) |
| 2532 | return; |
| 2533 | |
| 2534 | pci_read_config_dword(dev, pos + PCI_SRIOV_BAR, &bar); |
| 2535 | if (bar & PCI_BASE_ADDRESS_MEM_MASK) |
| 2536 | return; |
| 2537 | |
| 2538 | start = pci_resource_start(dev, 1); |
| 2539 | size = pci_resource_len(dev, 1); |
| 2540 | if (!start || size != 0x400000 || start & (size - 1)) |
| 2541 | return; |
| 2542 | |
| 2543 | pci_resource_flags(dev, 1) = 0; |
| 2544 | pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0); |
| 2545 | pci_write_config_dword(dev, pos + PCI_SRIOV_BAR, start); |
| 2546 | pci_write_config_dword(dev, pos + PCI_SRIOV_BAR + 12, start + size / 2); |
| 2547 | |
| 2548 | dev_info(&dev->dev, "use Flash Memory Space for SR-IOV BARs\n"); |
| 2549 | } |
| 2550 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10c9, quirk_i82576_sriov); |
| 2551 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e6, quirk_i82576_sriov); |
| 2552 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e7, quirk_i82576_sriov); |
Alexander Duyck | dcb4ea2 | 2009-05-06 10:25:42 +0000 | [diff] [blame] | 2553 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e8, quirk_i82576_sriov); |
| 2554 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150a, quirk_i82576_sriov); |
Alexander Duyck | 6f1186b | 2009-08-13 16:57:49 -0700 | [diff] [blame] | 2555 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150d, quirk_i82576_sriov); |
Alexander Duyck | 7a0deb6 | 2010-02-19 17:57:46 +0000 | [diff] [blame] | 2556 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov); |
Yu Zhao | 7eb93b1 | 2009-04-03 15:18:11 +0800 | [diff] [blame] | 2557 | |
| 2558 | #endif /* CONFIG_PCI_IOV */ |
| 2559 | |
Felix Radensky | 3322340 | 2010-03-28 16:02:02 +0300 | [diff] [blame] | 2560 | /* Allow manual resource allocation for PCI hotplug bridges |
| 2561 | * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For |
| 2562 | * some PCI-PCI hotplug bridges, like PLX 6254 (former HINT HB6), |
| 2563 | * kernel fails to allocate resources when hotplug device is |
| 2564 | * inserted and PCI bus is rescanned. |
| 2565 | */ |
| 2566 | static void __devinit quirk_hotplug_bridge(struct pci_dev *dev) |
| 2567 | { |
| 2568 | dev->is_hotplug_bridge = 1; |
| 2569 | } |
| 2570 | |
| 2571 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge); |
| 2572 | |
Maxim Levitsky | 03cd8f7 | 2010-03-05 13:43:20 -0800 | [diff] [blame] | 2573 | /* |
| 2574 | * This is a quirk for the Ricoh MMC controller found as a part of |
| 2575 | * some mulifunction chips. |
| 2576 | |
| 2577 | * This is very similiar and based on the ricoh_mmc driver written by |
| 2578 | * Philip Langdale. Thank you for these magic sequences. |
| 2579 | * |
| 2580 | * These chips implement the four main memory card controllers (SD, MMC, MS, xD) |
| 2581 | * and one or both of cardbus or firewire. |
| 2582 | * |
| 2583 | * It happens that they implement SD and MMC |
| 2584 | * support as separate controllers (and PCI functions). The linux SDHCI |
| 2585 | * driver supports MMC cards but the chip detects MMC cards in hardware |
| 2586 | * and directs them to the MMC controller - so the SDHCI driver never sees |
| 2587 | * them. |
| 2588 | * |
| 2589 | * To get around this, we must disable the useless MMC controller. |
| 2590 | * At that point, the SDHCI controller will start seeing them |
| 2591 | * It seems to be the case that the relevant PCI registers to deactivate the |
| 2592 | * MMC controller live on PCI function 0, which might be the cardbus controller |
| 2593 | * or the firewire controller, depending on the particular chip in question |
| 2594 | * |
| 2595 | * This has to be done early, because as soon as we disable the MMC controller |
| 2596 | * other pci functions shift up one level, e.g. function #2 becomes function |
| 2597 | * #1, and this will confuse the pci core. |
| 2598 | */ |
| 2599 | |
| 2600 | #ifdef CONFIG_MMC_RICOH_MMC |
| 2601 | static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev) |
| 2602 | { |
| 2603 | /* disable via cardbus interface */ |
| 2604 | u8 write_enable; |
| 2605 | u8 write_target; |
| 2606 | u8 disable; |
| 2607 | |
| 2608 | /* disable must be done via function #0 */ |
| 2609 | if (PCI_FUNC(dev->devfn)) |
| 2610 | return; |
| 2611 | |
| 2612 | pci_read_config_byte(dev, 0xB7, &disable); |
| 2613 | if (disable & 0x02) |
| 2614 | return; |
| 2615 | |
| 2616 | pci_read_config_byte(dev, 0x8E, &write_enable); |
| 2617 | pci_write_config_byte(dev, 0x8E, 0xAA); |
| 2618 | pci_read_config_byte(dev, 0x8D, &write_target); |
| 2619 | pci_write_config_byte(dev, 0x8D, 0xB7); |
| 2620 | pci_write_config_byte(dev, 0xB7, disable | 0x02); |
| 2621 | pci_write_config_byte(dev, 0x8E, write_enable); |
| 2622 | pci_write_config_byte(dev, 0x8D, write_target); |
| 2623 | |
| 2624 | dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n"); |
| 2625 | dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); |
| 2626 | } |
| 2627 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); |
| 2628 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); |
| 2629 | |
| 2630 | static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) |
| 2631 | { |
| 2632 | /* disable via firewire interface */ |
| 2633 | u8 write_enable; |
| 2634 | u8 disable; |
| 2635 | |
| 2636 | /* disable must be done via function #0 */ |
| 2637 | if (PCI_FUNC(dev->devfn)) |
| 2638 | return; |
| 2639 | |
| 2640 | pci_read_config_byte(dev, 0xCB, &disable); |
| 2641 | |
| 2642 | if (disable & 0x02) |
| 2643 | return; |
| 2644 | |
| 2645 | pci_read_config_byte(dev, 0xCA, &write_enable); |
| 2646 | pci_write_config_byte(dev, 0xCA, 0x57); |
| 2647 | pci_write_config_byte(dev, 0xCB, disable | 0x02); |
| 2648 | pci_write_config_byte(dev, 0xCA, write_enable); |
| 2649 | |
| 2650 | dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); |
| 2651 | dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); |
| 2652 | } |
| 2653 | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); |
| 2654 | DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); |
| 2655 | #endif /*CONFIG_MMC_RICOH_MMC*/ |
| 2656 | |
| 2657 | |
Jesse Barnes | bfb0f33 | 2008-10-27 17:50:21 -0700 | [diff] [blame] | 2658 | static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, |
| 2659 | struct pci_fixup *end) |
Thomas Petazzoni | 3d13731 | 2008-08-19 10:28:24 +0200 | [diff] [blame] | 2660 | { |
| 2661 | while (f < end) { |
| 2662 | if ((f->vendor == dev->vendor || f->vendor == (u16) PCI_ANY_ID) && |
Jesse Barnes | bfb0f33 | 2008-10-27 17:50:21 -0700 | [diff] [blame] | 2663 | (f->device == dev->device || f->device == (u16) PCI_ANY_ID)) { |
Yinghai Lu | c9bbb4a | 2008-09-24 19:04:33 -0700 | [diff] [blame] | 2664 | dev_dbg(&dev->dev, "calling %pF\n", f->hook); |
Thomas Petazzoni | 3d13731 | 2008-08-19 10:28:24 +0200 | [diff] [blame] | 2665 | f->hook(dev); |
| 2666 | } |
| 2667 | f++; |
| 2668 | } |
| 2669 | } |
| 2670 | |
| 2671 | extern struct pci_fixup __start_pci_fixups_early[]; |
| 2672 | extern struct pci_fixup __end_pci_fixups_early[]; |
| 2673 | extern struct pci_fixup __start_pci_fixups_header[]; |
| 2674 | extern struct pci_fixup __end_pci_fixups_header[]; |
| 2675 | extern struct pci_fixup __start_pci_fixups_final[]; |
| 2676 | extern struct pci_fixup __end_pci_fixups_final[]; |
| 2677 | extern struct pci_fixup __start_pci_fixups_enable[]; |
| 2678 | extern struct pci_fixup __end_pci_fixups_enable[]; |
| 2679 | extern struct pci_fixup __start_pci_fixups_resume[]; |
| 2680 | extern struct pci_fixup __end_pci_fixups_resume[]; |
| 2681 | extern struct pci_fixup __start_pci_fixups_resume_early[]; |
| 2682 | extern struct pci_fixup __end_pci_fixups_resume_early[]; |
| 2683 | extern struct pci_fixup __start_pci_fixups_suspend[]; |
| 2684 | extern struct pci_fixup __end_pci_fixups_suspend[]; |
| 2685 | |
| 2686 | |
| 2687 | void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) |
| 2688 | { |
| 2689 | struct pci_fixup *start, *end; |
| 2690 | |
| 2691 | switch(pass) { |
| 2692 | case pci_fixup_early: |
| 2693 | start = __start_pci_fixups_early; |
| 2694 | end = __end_pci_fixups_early; |
| 2695 | break; |
| 2696 | |
| 2697 | case pci_fixup_header: |
| 2698 | start = __start_pci_fixups_header; |
| 2699 | end = __end_pci_fixups_header; |
| 2700 | break; |
| 2701 | |
| 2702 | case pci_fixup_final: |
| 2703 | start = __start_pci_fixups_final; |
| 2704 | end = __end_pci_fixups_final; |
| 2705 | break; |
| 2706 | |
| 2707 | case pci_fixup_enable: |
| 2708 | start = __start_pci_fixups_enable; |
| 2709 | end = __end_pci_fixups_enable; |
| 2710 | break; |
| 2711 | |
| 2712 | case pci_fixup_resume: |
| 2713 | start = __start_pci_fixups_resume; |
| 2714 | end = __end_pci_fixups_resume; |
| 2715 | break; |
| 2716 | |
| 2717 | case pci_fixup_resume_early: |
| 2718 | start = __start_pci_fixups_resume_early; |
| 2719 | end = __end_pci_fixups_resume_early; |
| 2720 | break; |
| 2721 | |
| 2722 | case pci_fixup_suspend: |
| 2723 | start = __start_pci_fixups_suspend; |
| 2724 | end = __end_pci_fixups_suspend; |
| 2725 | break; |
| 2726 | |
| 2727 | default: |
| 2728 | /* stupid compiler warning, you would think with an enum... */ |
| 2729 | return; |
| 2730 | } |
| 2731 | pci_do_fixups(dev, start, end); |
| 2732 | } |
Rafael J. Wysocki | 93177a7 | 2010-01-02 22:57:24 +0100 | [diff] [blame] | 2733 | EXPORT_SYMBOL(pci_fixup_device); |
David Woodhouse | 8d86fb2 | 2009-10-12 12:48:43 +0100 | [diff] [blame] | 2734 | |
David Woodhouse | 0001026 | 2009-10-12 12:50:34 +0100 | [diff] [blame] | 2735 | static int __init pci_apply_final_quirks(void) |
David Woodhouse | 8d86fb2 | 2009-10-12 12:48:43 +0100 | [diff] [blame] | 2736 | { |
| 2737 | struct pci_dev *dev = NULL; |
Jesse Barnes | ac1aa47 | 2009-10-26 13:20:44 -0700 | [diff] [blame] | 2738 | u8 cls = 0; |
| 2739 | u8 tmp; |
| 2740 | |
| 2741 | if (pci_cache_line_size) |
| 2742 | printk(KERN_DEBUG "PCI: CLS %u bytes\n", |
| 2743 | pci_cache_line_size << 2); |
David Woodhouse | 8d86fb2 | 2009-10-12 12:48:43 +0100 | [diff] [blame] | 2744 | |
| 2745 | while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { |
| 2746 | pci_fixup_device(pci_fixup_final, dev); |
Jesse Barnes | ac1aa47 | 2009-10-26 13:20:44 -0700 | [diff] [blame] | 2747 | /* |
| 2748 | * If arch hasn't set it explicitly yet, use the CLS |
| 2749 | * value shared by all PCI devices. If there's a |
| 2750 | * mismatch, fall back to the default value. |
| 2751 | */ |
| 2752 | if (!pci_cache_line_size) { |
| 2753 | pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp); |
| 2754 | if (!cls) |
| 2755 | cls = tmp; |
| 2756 | if (!tmp || cls == tmp) |
| 2757 | continue; |
| 2758 | |
| 2759 | printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), " |
| 2760 | "using %u bytes\n", cls << 2, tmp << 2, |
| 2761 | pci_dfl_cache_line_size << 2); |
| 2762 | pci_cache_line_size = pci_dfl_cache_line_size; |
| 2763 | } |
| 2764 | } |
| 2765 | if (!pci_cache_line_size) { |
| 2766 | printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n", |
| 2767 | cls << 2, pci_dfl_cache_line_size << 2); |
Csaba Henk | 2820f33 | 2009-12-15 17:55:25 +0530 | [diff] [blame] | 2768 | pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size; |
David Woodhouse | 8d86fb2 | 2009-10-12 12:48:43 +0100 | [diff] [blame] | 2769 | } |
| 2770 | |
| 2771 | return 0; |
| 2772 | } |
| 2773 | |
David Woodhouse | cf6f3bf | 2009-10-12 12:51:22 +0100 | [diff] [blame] | 2774 | fs_initcall_sync(pci_apply_final_quirks); |
Dexuan Cui | b9c3b26 | 2009-12-07 13:03:21 +0800 | [diff] [blame] | 2775 | |
| 2776 | /* |
| 2777 | * Followings are device-specific reset methods which can be used to |
| 2778 | * reset a single function if other methods (e.g. FLR, PM D0->D3) are |
| 2779 | * not available. |
| 2780 | */ |
Dexuan Cui | aeb3001 | 2009-12-07 13:03:22 +0800 | [diff] [blame] | 2781 | static int reset_intel_generic_dev(struct pci_dev *dev, int probe) |
| 2782 | { |
| 2783 | int pos; |
| 2784 | |
| 2785 | /* only implement PCI_CLASS_SERIAL_USB at present */ |
| 2786 | if (dev->class == PCI_CLASS_SERIAL_USB) { |
| 2787 | pos = pci_find_capability(dev, PCI_CAP_ID_VNDR); |
| 2788 | if (!pos) |
| 2789 | return -ENOTTY; |
| 2790 | |
| 2791 | if (probe) |
| 2792 | return 0; |
| 2793 | |
| 2794 | pci_write_config_byte(dev, pos + 0x4, 1); |
| 2795 | msleep(100); |
| 2796 | |
| 2797 | return 0; |
| 2798 | } else { |
| 2799 | return -ENOTTY; |
| 2800 | } |
| 2801 | } |
| 2802 | |
Dexuan Cui | c763e7b | 2009-12-07 13:03:23 +0800 | [diff] [blame] | 2803 | static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe) |
| 2804 | { |
| 2805 | int pos; |
| 2806 | |
| 2807 | pos = pci_find_capability(dev, PCI_CAP_ID_EXP); |
| 2808 | if (!pos) |
| 2809 | return -ENOTTY; |
| 2810 | |
| 2811 | if (probe) |
| 2812 | return 0; |
| 2813 | |
| 2814 | pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, |
| 2815 | PCI_EXP_DEVCTL_BCR_FLR); |
| 2816 | msleep(100); |
| 2817 | |
| 2818 | return 0; |
| 2819 | } |
| 2820 | |
| 2821 | #define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed |
| 2822 | |
Rafael J. Wysocki | 5b889bf | 2009-12-31 19:06:35 +0100 | [diff] [blame] | 2823 | static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { |
Dexuan Cui | c763e7b | 2009-12-07 13:03:23 +0800 | [diff] [blame] | 2824 | { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, |
| 2825 | reset_intel_82599_sfp_virtfn }, |
Dexuan Cui | aeb3001 | 2009-12-07 13:03:22 +0800 | [diff] [blame] | 2826 | { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, |
| 2827 | reset_intel_generic_dev }, |
Dexuan Cui | b9c3b26 | 2009-12-07 13:03:21 +0800 | [diff] [blame] | 2828 | { 0 } |
| 2829 | }; |
Rafael J. Wysocki | 5b889bf | 2009-12-31 19:06:35 +0100 | [diff] [blame] | 2830 | |
| 2831 | int pci_dev_specific_reset(struct pci_dev *dev, int probe) |
| 2832 | { |
Linus Torvalds | df9d1e8 | 2009-12-31 16:44:43 -0800 | [diff] [blame] | 2833 | const struct pci_dev_reset_methods *i; |
Rafael J. Wysocki | 5b889bf | 2009-12-31 19:06:35 +0100 | [diff] [blame] | 2834 | |
| 2835 | for (i = pci_dev_reset_methods; i->reset; i++) { |
| 2836 | if ((i->vendor == dev->vendor || |
| 2837 | i->vendor == (u16)PCI_ANY_ID) && |
| 2838 | (i->device == dev->device || |
| 2839 | i->device == (u16)PCI_ANY_ID)) |
| 2840 | return i->reset(dev, probe); |
| 2841 | } |
| 2842 | |
| 2843 | return -ENOTTY; |
| 2844 | } |