blob: dca5518b01395a31e98f3a91a2df14736e063652 [file] [log] [blame]
Mike Lockwood85c34d22013-01-21 23:43:46 +00001/*
2 * Copyright 2007, Google Inc.
3 * Copyright 2012, Intel Inc.
4 *
5 * based on omap.c driver, which was
6 * Copyright (C) 2004 Nokia Corporation
7 * Written by Tuukka Tikkanen and Juha Yrjölä <juha.yrjola@nokia.com>
8 * Misc hacks here and there by Tony Lindgren <tony@atomide.com>
9 * Other hacks (DMA, SD, etc) by David Brownell
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 */
15
16#include <linux/module.h>
17#include <linux/platform_device.h>
18#include <linux/major.h>
19
20#include <linux/types.h>
21#include <linux/pci.h>
22#include <linux/interrupt.h>
23
24#include <linux/kernel.h>
25#include <linux/fs.h>
26#include <linux/errno.h>
27#include <linux/hdreg.h>
28#include <linux/kdev_t.h>
29#include <linux/blkdev.h>
30#include <linux/mutex.h>
31#include <linux/scatterlist.h>
32#include <linux/mmc/mmc.h>
33#include <linux/mmc/sdio.h>
34#include <linux/mmc/host.h>
35#include <linux/mmc/card.h>
36
37#include <linux/moduleparam.h>
38#include <linux/init.h>
39#include <linux/ioport.h>
40#include <linux/dma-mapping.h>
41#include <linux/delay.h>
42#include <linux/spinlock.h>
43#include <linux/timer.h>
44#include <linux/clk.h>
Christoph Hellwig84be4562015-05-01 12:46:15 +020045#include <linux/scatterlist.h>
Mike Lockwood85c34d22013-01-21 23:43:46 +000046
47#include <asm/io.h>
48#include <asm/irq.h>
Mike Lockwood85c34d22013-01-21 23:43:46 +000049
50#include <asm/types.h>
51#include <asm/io.h>
52#include <asm/uaccess.h>
53
54#define DRIVER_NAME "goldfish_mmc"
55
56#define BUFFER_SIZE 16384
57
58#define GOLDFISH_MMC_READ(host, addr) (readl(host->reg_base + addr))
59#define GOLDFISH_MMC_WRITE(host, addr, x) (writel(x, host->reg_base + addr))
60
61enum {
62 /* status register */
63 MMC_INT_STATUS = 0x00,
64 /* set this to enable IRQ */
65 MMC_INT_ENABLE = 0x04,
66 /* set this to specify buffer address */
67 MMC_SET_BUFFER = 0x08,
68
69 /* MMC command number */
70 MMC_CMD = 0x0C,
71
72 /* MMC argument */
73 MMC_ARG = 0x10,
74
75 /* MMC response (or R2 bits 0 - 31) */
76 MMC_RESP_0 = 0x14,
77
78 /* MMC R2 response bits 32 - 63 */
79 MMC_RESP_1 = 0x18,
80
81 /* MMC R2 response bits 64 - 95 */
82 MMC_RESP_2 = 0x1C,
83
84 /* MMC R2 response bits 96 - 127 */
85 MMC_RESP_3 = 0x20,
86
87 MMC_BLOCK_LENGTH = 0x24,
88 MMC_BLOCK_COUNT = 0x28,
89
90 /* MMC state flags */
91 MMC_STATE = 0x2C,
92
93 /* MMC_INT_STATUS bits */
94
95 MMC_STAT_END_OF_CMD = 1U << 0,
96 MMC_STAT_END_OF_DATA = 1U << 1,
97 MMC_STAT_STATE_CHANGE = 1U << 2,
98 MMC_STAT_CMD_TIMEOUT = 1U << 3,
99
100 /* MMC_STATE bits */
101 MMC_STATE_INSERTED = 1U << 0,
102 MMC_STATE_READ_ONLY = 1U << 1,
103};
104
105/*
106 * Command types
107 */
108#define OMAP_MMC_CMDTYPE_BC 0
109#define OMAP_MMC_CMDTYPE_BCR 1
110#define OMAP_MMC_CMDTYPE_AC 2
111#define OMAP_MMC_CMDTYPE_ADTC 3
112
113
114struct goldfish_mmc_host {
115 struct mmc_request *mrq;
116 struct mmc_command *cmd;
117 struct mmc_data *data;
118 struct mmc_host *mmc;
119 struct device *dev;
120 unsigned char id; /* 16xx chips have 2 MMC blocks */
Christoph Hellwig092b6db2015-08-17 10:09:26 +0200121 void *virt_base;
Mike Lockwood85c34d22013-01-21 23:43:46 +0000122 unsigned int phys_base;
123 int irq;
124 unsigned char bus_mode;
125 unsigned char hw_bus_mode;
126
127 unsigned int sg_len;
128 unsigned dma_done:1;
129 unsigned dma_in_use:1;
130
131 void __iomem *reg_base;
132};
133
134static inline int
135goldfish_mmc_cover_is_open(struct goldfish_mmc_host *host)
136{
137 return 0;
138}
139
140static ssize_t
141goldfish_mmc_show_cover_switch(struct device *dev,
142 struct device_attribute *attr, char *buf)
143{
144 struct goldfish_mmc_host *host = dev_get_drvdata(dev);
145
146 return sprintf(buf, "%s\n", goldfish_mmc_cover_is_open(host) ? "open" :
147 "closed");
148}
149
150static DEVICE_ATTR(cover_switch, S_IRUGO, goldfish_mmc_show_cover_switch, NULL);
151
152static void
153goldfish_mmc_start_command(struct goldfish_mmc_host *host, struct mmc_command *cmd)
154{
155 u32 cmdreg;
156 u32 resptype;
157 u32 cmdtype;
158
159 host->cmd = cmd;
160
161 resptype = 0;
162 cmdtype = 0;
163
164 /* Our hardware needs to know exact type */
165 switch (mmc_resp_type(cmd)) {
166 case MMC_RSP_NONE:
167 break;
168 case MMC_RSP_R1:
169 case MMC_RSP_R1B:
170 /* resp 1, 1b, 6, 7 */
171 resptype = 1;
172 break;
173 case MMC_RSP_R2:
174 resptype = 2;
175 break;
176 case MMC_RSP_R3:
177 resptype = 3;
178 break;
179 default:
180 dev_err(mmc_dev(host->mmc),
181 "Invalid response type: %04x\n", mmc_resp_type(cmd));
182 break;
183 }
184
185 if (mmc_cmd_type(cmd) == MMC_CMD_ADTC)
186 cmdtype = OMAP_MMC_CMDTYPE_ADTC;
187 else if (mmc_cmd_type(cmd) == MMC_CMD_BC)
188 cmdtype = OMAP_MMC_CMDTYPE_BC;
189 else if (mmc_cmd_type(cmd) == MMC_CMD_BCR)
190 cmdtype = OMAP_MMC_CMDTYPE_BCR;
191 else
192 cmdtype = OMAP_MMC_CMDTYPE_AC;
193
194 cmdreg = cmd->opcode | (resptype << 8) | (cmdtype << 12);
195
196 if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
197 cmdreg |= 1 << 6;
198
199 if (cmd->flags & MMC_RSP_BUSY)
200 cmdreg |= 1 << 11;
201
202 if (host->data && !(host->data->flags & MMC_DATA_WRITE))
203 cmdreg |= 1 << 15;
204
205 GOLDFISH_MMC_WRITE(host, MMC_ARG, cmd->arg);
206 GOLDFISH_MMC_WRITE(host, MMC_CMD, cmdreg);
207}
208
209static void goldfish_mmc_xfer_done(struct goldfish_mmc_host *host,
210 struct mmc_data *data)
211{
212 if (host->dma_in_use) {
213 enum dma_data_direction dma_data_dir;
214
215 if (data->flags & MMC_DATA_WRITE)
216 dma_data_dir = DMA_TO_DEVICE;
217 else
218 dma_data_dir = DMA_FROM_DEVICE;
219
220 if (dma_data_dir == DMA_FROM_DEVICE) {
221 /*
222 * We don't really have DMA, so we need
223 * to copy from our platform driver buffer
224 */
225 uint8_t *dest = (uint8_t *)sg_virt(data->sg);
226 memcpy(dest, host->virt_base, data->sg->length);
227 }
228 host->data->bytes_xfered += data->sg->length;
229 dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len,
230 dma_data_dir);
231 }
232
233 host->data = NULL;
234 host->sg_len = 0;
235
236 /*
237 * NOTE: MMC layer will sometimes poll-wait CMD13 next, issuing
238 * dozens of requests until the card finishes writing data.
239 * It'd be cheaper to just wait till an EOFB interrupt arrives...
240 */
241
242 if (!data->stop) {
243 host->mrq = NULL;
244 mmc_request_done(host->mmc, data->mrq);
245 return;
246 }
247
248 goldfish_mmc_start_command(host, data->stop);
249}
250
251static void goldfish_mmc_end_of_data(struct goldfish_mmc_host *host,
252 struct mmc_data *data)
253{
254 if (!host->dma_in_use) {
255 goldfish_mmc_xfer_done(host, data);
256 return;
257 }
258 if (host->dma_done)
259 goldfish_mmc_xfer_done(host, data);
260}
261
262static void goldfish_mmc_cmd_done(struct goldfish_mmc_host *host,
263 struct mmc_command *cmd)
264{
265 host->cmd = NULL;
266 if (cmd->flags & MMC_RSP_PRESENT) {
267 if (cmd->flags & MMC_RSP_136) {
268 /* response type 2 */
269 cmd->resp[3] =
270 GOLDFISH_MMC_READ(host, MMC_RESP_0);
271 cmd->resp[2] =
272 GOLDFISH_MMC_READ(host, MMC_RESP_1);
273 cmd->resp[1] =
274 GOLDFISH_MMC_READ(host, MMC_RESP_2);
275 cmd->resp[0] =
276 GOLDFISH_MMC_READ(host, MMC_RESP_3);
277 } else {
278 /* response types 1, 1b, 3, 4, 5, 6 */
279 cmd->resp[0] =
280 GOLDFISH_MMC_READ(host, MMC_RESP_0);
281 }
282 }
283
284 if (host->data == NULL || cmd->error) {
285 host->mrq = NULL;
286 mmc_request_done(host->mmc, cmd->mrq);
287 }
288}
289
290static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id)
291{
292 struct goldfish_mmc_host *host = (struct goldfish_mmc_host *)dev_id;
293 u16 status;
294 int end_command = 0;
295 int end_transfer = 0;
296 int transfer_error = 0;
297 int state_changed = 0;
298 int cmd_timeout = 0;
299
300 while ((status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS)) != 0) {
301 GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status);
302
303 if (status & MMC_STAT_END_OF_CMD)
304 end_command = 1;
305
306 if (status & MMC_STAT_END_OF_DATA)
307 end_transfer = 1;
308
309 if (status & MMC_STAT_STATE_CHANGE)
310 state_changed = 1;
311
312 if (status & MMC_STAT_CMD_TIMEOUT) {
313 end_command = 0;
314 cmd_timeout = 1;
315 }
316 }
317
318 if (cmd_timeout) {
319 struct mmc_request *mrq = host->mrq;
320 mrq->cmd->error = -ETIMEDOUT;
321 host->mrq = NULL;
322 mmc_request_done(host->mmc, mrq);
323 }
324
325 if (end_command)
326 goldfish_mmc_cmd_done(host, host->cmd);
327
328 if (transfer_error)
329 goldfish_mmc_xfer_done(host, host->data);
330 else if (end_transfer) {
331 host->dma_done = 1;
332 goldfish_mmc_end_of_data(host, host->data);
333 } else if (host->data != NULL) {
334 /*
335 * WORKAROUND -- after porting this driver from 2.6 to 3.4,
336 * during device initialization, cases where host->data is
337 * non-null but end_transfer is false would occur. Doing
338 * nothing in such cases results in no further interrupts,
339 * and initialization failure.
340 * TODO -- find the real cause.
341 */
342 host->dma_done = 1;
343 goldfish_mmc_end_of_data(host, host->data);
344 }
345
346 if (state_changed) {
347 u32 state = GOLDFISH_MMC_READ(host, MMC_STATE);
348 pr_info("%s: Card detect now %d\n", __func__,
349 (state & MMC_STATE_INSERTED));
350 mmc_detect_change(host->mmc, 0);
351 }
352
353 if (!end_command && !end_transfer &&
354 !transfer_error && !state_changed && !cmd_timeout) {
355 status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS);
356 dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status);
357 if (status != 0) {
358 GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status);
359 GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, 0);
360 }
361 }
362
363 return IRQ_HANDLED;
364}
365
366static void goldfish_mmc_prepare_data(struct goldfish_mmc_host *host,
367 struct mmc_request *req)
368{
369 struct mmc_data *data = req->data;
370 int block_size;
371 unsigned sg_len;
372 enum dma_data_direction dma_data_dir;
373
374 host->data = data;
375 if (data == NULL) {
376 GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, 0);
377 GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, 0);
378 host->dma_in_use = 0;
379 return;
380 }
381
382 block_size = data->blksz;
383
384 GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, data->blocks - 1);
385 GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, block_size - 1);
386
387 /*
388 * Cope with calling layer confusion; it issues "single
389 * block" writes using multi-block scatterlists.
390 */
391 sg_len = (data->blocks == 1) ? 1 : data->sg_len;
392
393 if (data->flags & MMC_DATA_WRITE)
394 dma_data_dir = DMA_TO_DEVICE;
395 else
396 dma_data_dir = DMA_FROM_DEVICE;
397
398 host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
399 sg_len, dma_data_dir);
400 host->dma_done = 0;
401 host->dma_in_use = 1;
402
403 if (dma_data_dir == DMA_TO_DEVICE) {
404 /*
405 * We don't really have DMA, so we need to copy to our
406 * platform driver buffer
407 */
408 const uint8_t *src = (uint8_t *)sg_virt(data->sg);
409 memcpy(host->virt_base, src, data->sg->length);
410 }
411}
412
413static void goldfish_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
414{
415 struct goldfish_mmc_host *host = mmc_priv(mmc);
416
417 WARN_ON(host->mrq != NULL);
418
419 host->mrq = req;
420 goldfish_mmc_prepare_data(host, req);
421 goldfish_mmc_start_command(host, req->cmd);
422
423 /*
424 * This is to avoid accidentally being detected as an SDIO card
425 * in mmc_attach_sdio().
426 */
427 if (req->cmd->opcode == SD_IO_SEND_OP_COND &&
428 req->cmd->flags == (MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR))
429 req->cmd->error = -EINVAL;
430}
431
432static void goldfish_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
433{
434 struct goldfish_mmc_host *host = mmc_priv(mmc);
435
436 host->bus_mode = ios->bus_mode;
437 host->hw_bus_mode = host->bus_mode;
438}
439
440static int goldfish_mmc_get_ro(struct mmc_host *mmc)
441{
442 uint32_t state;
443 struct goldfish_mmc_host *host = mmc_priv(mmc);
444
445 state = GOLDFISH_MMC_READ(host, MMC_STATE);
446 return ((state & MMC_STATE_READ_ONLY) != 0);
447}
448
449static const struct mmc_host_ops goldfish_mmc_ops = {
450 .request = goldfish_mmc_request,
451 .set_ios = goldfish_mmc_set_ios,
452 .get_ro = goldfish_mmc_get_ro,
453};
454
455static int goldfish_mmc_probe(struct platform_device *pdev)
456{
457 struct mmc_host *mmc;
458 struct goldfish_mmc_host *host = NULL;
459 struct resource *res;
460 int ret = 0;
461 int irq;
462 dma_addr_t buf_addr;
463
464 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
465 irq = platform_get_irq(pdev, 0);
466 if (res == NULL || irq < 0)
467 return -ENXIO;
468
469 mmc = mmc_alloc_host(sizeof(struct goldfish_mmc_host), &pdev->dev);
470 if (mmc == NULL) {
471 ret = -ENOMEM;
472 goto err_alloc_host_failed;
473 }
474
475 host = mmc_priv(mmc);
476 host->mmc = mmc;
477
478 pr_err("mmc: Mapping %lX to %lX\n", (long)res->start, (long)res->end);
Silviu-Mihai Popescu6a966e02013-03-12 20:21:26 +0200479 host->reg_base = ioremap(res->start, resource_size(res));
Mike Lockwood85c34d22013-01-21 23:43:46 +0000480 if (host->reg_base == NULL) {
481 ret = -ENOMEM;
482 goto ioremap_failed;
483 }
484 host->virt_base = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
485 &buf_addr, GFP_KERNEL);
486
487 if (host->virt_base == 0) {
488 ret = -ENOMEM;
489 goto dma_alloc_failed;
490 }
491 host->phys_base = buf_addr;
492
493 host->id = pdev->id;
494 host->irq = irq;
495
496 mmc->ops = &goldfish_mmc_ops;
497 mmc->f_min = 400000;
498 mmc->f_max = 24000000;
499 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
500 mmc->caps = MMC_CAP_4_BIT_DATA;
501
502 /* Use scatterlist DMA to reduce per-transfer costs.
503 * NOTE max_seg_size assumption that small blocks aren't
504 * normally used (except e.g. for reading SD registers).
505 */
506 mmc->max_segs = 32;
507 mmc->max_blk_size = 2048; /* MMC_BLOCK_LENGTH is 11 bits (+1) */
508 mmc->max_blk_count = 2048; /* MMC_BLOCK_COUNT is 11 bits (+1) */
509 mmc->max_req_size = BUFFER_SIZE;
510 mmc->max_seg_size = mmc->max_req_size;
511
512 ret = request_irq(host->irq, goldfish_mmc_irq, 0, DRIVER_NAME, host);
513 if (ret) {
514 dev_err(&pdev->dev, "Failed IRQ Adding goldfish MMC\n");
515 goto err_request_irq_failed;
516 }
517
518 host->dev = &pdev->dev;
519 platform_set_drvdata(pdev, host);
520
521 ret = device_create_file(&pdev->dev, &dev_attr_cover_switch);
522 if (ret)
523 dev_warn(mmc_dev(host->mmc),
524 "Unable to create sysfs attributes\n");
525
526 GOLDFISH_MMC_WRITE(host, MMC_SET_BUFFER, host->phys_base);
527 GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE,
528 MMC_STAT_END_OF_CMD | MMC_STAT_END_OF_DATA |
529 MMC_STAT_STATE_CHANGE | MMC_STAT_CMD_TIMEOUT);
530
531 mmc_add_host(mmc);
532 return 0;
533
534err_request_irq_failed:
535 dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base,
536 host->phys_base);
537dma_alloc_failed:
538 iounmap(host->reg_base);
539ioremap_failed:
540 mmc_free_host(host->mmc);
541err_alloc_host_failed:
542 return ret;
543}
544
545static int goldfish_mmc_remove(struct platform_device *pdev)
546{
547 struct goldfish_mmc_host *host = platform_get_drvdata(pdev);
548
Mike Lockwood85c34d22013-01-21 23:43:46 +0000549 BUG_ON(host == NULL);
550
551 mmc_remove_host(host->mmc);
552 free_irq(host->irq, host);
553 dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base, host->phys_base);
554 iounmap(host->reg_base);
555 mmc_free_host(host->mmc);
556 return 0;
557}
558
559static struct platform_driver goldfish_mmc_driver = {
560 .probe = goldfish_mmc_probe,
561 .remove = goldfish_mmc_remove,
562 .driver = {
563 .name = DRIVER_NAME,
564 },
565};
566
567module_platform_driver(goldfish_mmc_driver);
568MODULE_LICENSE("GPL v2");