blob: 45eee6e9c6c858630f8d8a3a75a2d01a869917f2 [file] [log] [blame]
Randy Vinson80cb9ae2006-01-20 13:53:38 -08001/*
Anton Vorontsov1af10772009-12-14 18:41:12 +03002 * Copyright 2005-2009 MontaVista Software, Inc.
Ramneek Mehresh58c559e2012-03-20 10:35:50 +05303 * Copyright 2008,2012 Freescale Semiconductor, Inc.
Randy Vinson80cb9ae2006-01-20 13:53:38 -08004 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2 of the License, or (at your
8 * option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
12 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
13 * for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software Foundation,
17 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18 *
19 * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
20 * by Hunter Wu.
Anton Vorontsov1af10772009-12-14 18:41:12 +030021 * Power Management support by Dave Liu <daveliu@freescale.com>,
22 * Jerry Huang <Chang-Ming.Huang@freescale.com> and
23 * Anton Vorontsov <avorontsov@ru.mvista.com>.
Randy Vinson80cb9ae2006-01-20 13:53:38 -080024 */
25
Anton Vorontsov1af10772009-12-14 18:41:12 +030026#include <linux/kernel.h>
27#include <linux/types.h>
28#include <linux/delay.h>
29#include <linux/pm.h>
Kishon Vijay Abraham Ided017e2012-06-26 17:40:32 +053030#include <linux/err.h>
Randy Vinson80cb9ae2006-01-20 13:53:38 -080031#include <linux/platform_device.h>
32#include <linux/fsl_devices.h>
33
34#include "ehci-fsl.h"
35
Randy Vinson80cb9ae2006-01-20 13:53:38 -080036/* configure so an HC device and id are always provided */
37/* always called with process context; sleeping is OK */
38
39/**
40 * usb_hcd_fsl_probe - initialize FSL-based HCDs
41 * @drvier: Driver to be used for this HCD
42 * @pdev: USB Host Controller being probed
43 * Context: !in_interrupt()
44 *
45 * Allocates basic resources for this USB host controller.
46 *
47 */
Anton Vorontsovdad38432009-12-14 18:41:05 +030048static int usb_hcd_fsl_probe(const struct hc_driver *driver,
49 struct platform_device *pdev)
Randy Vinson80cb9ae2006-01-20 13:53:38 -080050{
51 struct fsl_usb2_platform_data *pdata;
52 struct usb_hcd *hcd;
53 struct resource *res;
54 int irq;
55 int retval;
Randy Vinson80cb9ae2006-01-20 13:53:38 -080056
57 pr_debug("initializing FSL-SOC USB Controller\n");
58
59 /* Need platform data for setup */
Jingoo Hand4f09e22013-07-30 19:59:40 +090060 pdata = (struct fsl_usb2_platform_data *)dev_get_platdata(&pdev->dev);
Randy Vinson80cb9ae2006-01-20 13:53:38 -080061 if (!pdata) {
62 dev_err(&pdev->dev,
Kay Sievers7071a3c2008-05-02 06:02:41 +020063 "No platform data for %s.\n", dev_name(&pdev->dev));
Randy Vinson80cb9ae2006-01-20 13:53:38 -080064 return -ENODEV;
65 }
66
67 /*
68 * This is a host mode driver, verify that we're supposed to be
69 * in host mode.
70 */
71 if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
Li Yangba029782007-05-11 17:09:55 +080072 (pdata->operating_mode == FSL_USB2_MPH_HOST) ||
73 (pdata->operating_mode == FSL_USB2_DR_OTG))) {
Randy Vinson80cb9ae2006-01-20 13:53:38 -080074 dev_err(&pdev->dev,
75 "Non Host Mode configured for %s. Wrong driver linked.\n",
Kay Sievers7071a3c2008-05-02 06:02:41 +020076 dev_name(&pdev->dev));
Randy Vinson80cb9ae2006-01-20 13:53:38 -080077 return -ENODEV;
78 }
79
80 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
81 if (!res) {
82 dev_err(&pdev->dev,
83 "Found HC with no IRQ. Check %s setup!\n",
Kay Sievers7071a3c2008-05-02 06:02:41 +020084 dev_name(&pdev->dev));
Randy Vinson80cb9ae2006-01-20 13:53:38 -080085 return -ENODEV;
86 }
87 irq = res->start;
88
Kay Sievers7071a3c2008-05-02 06:02:41 +020089 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
Randy Vinson80cb9ae2006-01-20 13:53:38 -080090 if (!hcd) {
91 retval = -ENOMEM;
92 goto err1;
93 }
94
95 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
96 if (!res) {
97 dev_err(&pdev->dev,
98 "Found HC with no register addr. Check %s setup!\n",
Kay Sievers7071a3c2008-05-02 06:02:41 +020099 dev_name(&pdev->dev));
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800100 retval = -ENODEV;
101 goto err2;
102 }
103 hcd->rsrc_start = res->start;
Joe Perches28f65c112011-06-09 09:13:32 -0700104 hcd->rsrc_len = resource_size(res);
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800105 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
106 driver->description)) {
107 dev_dbg(&pdev->dev, "controller already in use\n");
108 retval = -EBUSY;
109 goto err2;
110 }
111 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
112
113 if (hcd->regs == NULL) {
114 dev_dbg(&pdev->dev, "error mapping memory\n");
115 retval = -EFAULT;
116 goto err3;
117 }
118
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200119 pdata->regs = hcd->regs;
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800120
Anatolij Gustschin83722bc2011-04-18 22:02:00 +0200121 if (pdata->power_budget)
122 hcd->power_budget = pdata->power_budget;
123
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200124 /*
125 * do platform specific init: check the clock, grab/config pins, etc.
126 */
127 if (pdata->init && pdata->init(pdev)) {
128 retval = -ENODEV;
Julia Lawall2492c6e2012-01-12 10:55:13 +0100129 goto err4;
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200130 }
131
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200132 /* Enable USB controller, 83xx or 8536 */
133 if (pdata->have_sysif_regs)
134 setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
135
136 /* Don't need to set host mode here. It will be done by tdi_reset() */
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800137
Yong Zhangb5dd18d2011-09-07 16:10:52 +0800138 retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800139 if (retval != 0)
140 goto err4;
Anatolij Gustschin83722bc2011-04-18 22:02:00 +0200141
142#ifdef CONFIG_USB_OTG
143 if (pdata->operating_mode == FSL_USB2_DR_OTG) {
144 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
145
Greg Kroah-Hartmanff9cce82012-07-05 15:35:41 -0700146 hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2);
Richard Zhaoc2e935a2012-06-13 20:34:12 +0800147 dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n",
148 hcd, ehci, hcd->phy);
Anatolij Gustschin83722bc2011-04-18 22:02:00 +0200149
Greg Kroah-Hartmanff9cce82012-07-05 15:35:41 -0700150 if (!IS_ERR_OR_NULL(hcd->phy)) {
Richard Zhaoc2e935a2012-06-13 20:34:12 +0800151 retval = otg_set_host(hcd->phy->otg,
Anatolij Gustschin83722bc2011-04-18 22:02:00 +0200152 &ehci_to_hcd(ehci)->self);
153 if (retval) {
Greg Kroah-Hartmanff9cce82012-07-05 15:35:41 -0700154 usb_put_phy(hcd->phy);
Anatolij Gustschin83722bc2011-04-18 22:02:00 +0200155 goto err4;
156 }
157 } else {
Richard Zhaoc2e935a2012-06-13 20:34:12 +0800158 dev_err(&pdev->dev, "can't find phy\n");
Anatolij Gustschin83722bc2011-04-18 22:02:00 +0200159 retval = -ENODEV;
160 goto err4;
161 }
162 }
163#endif
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800164 return retval;
165
166 err4:
167 iounmap(hcd->regs);
168 err3:
169 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
170 err2:
171 usb_put_hcd(hcd);
172 err1:
Kay Sievers7071a3c2008-05-02 06:02:41 +0200173 dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200174 if (pdata->exit)
175 pdata->exit(pdev);
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800176 return retval;
177}
178
179/* may be called without controller electrically present */
180/* may be called with controller, bus, and devices active */
181
182/**
183 * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
184 * @dev: USB Host Controller being removed
185 * Context: !in_interrupt()
186 *
187 * Reverses the effect of usb_hcd_fsl_probe().
188 *
189 */
Anton Vorontsovdad38432009-12-14 18:41:05 +0300190static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
191 struct platform_device *pdev)
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800192{
Jingoo Hand4f09e22013-07-30 19:59:40 +0900193 struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
Anatolij Gustschin83722bc2011-04-18 22:02:00 +0200194
Greg Kroah-Hartmanff9cce82012-07-05 15:35:41 -0700195 if (!IS_ERR_OR_NULL(hcd->phy)) {
Richard Zhaoc2e935a2012-06-13 20:34:12 +0800196 otg_set_host(hcd->phy->otg, NULL);
Greg Kroah-Hartmanff9cce82012-07-05 15:35:41 -0700197 usb_put_phy(hcd->phy);
Anatolij Gustschin83722bc2011-04-18 22:02:00 +0200198 }
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200199
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800200 usb_remove_hcd(hcd);
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200201
202 /*
203 * do platform specific un-initialization:
204 * release iomux pins, disable clock, etc.
205 */
206 if (pdata->exit)
207 pdata->exit(pdev);
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800208 iounmap(hcd->regs);
209 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
210 usb_put_hcd(hcd);
211}
212
Shengzhou Liu3735ba82012-08-22 18:17:00 +0800213static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200214 enum fsl_usb2_phy_modes phy_mode,
215 unsigned int port_offset)
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800216{
Shengzhou Liu3735ba82012-08-22 18:17:00 +0800217 u32 portsc;
Ramneek Mehresh58c559e2012-03-20 10:35:50 +0530218 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
Shengzhou Liu28c56ea2012-02-16 18:02:20 +0800219 void __iomem *non_ehci = hcd->regs;
Ramneek Mehresh58c559e2012-03-20 10:35:50 +0530220 struct device *dev = hcd->self.controller;
Jingoo Hand4f09e22013-07-30 19:59:40 +0900221 struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
Anatolij Gustschinf941f692012-04-10 10:48:11 +0200222
Ramneek Mehresh58c559e2012-03-20 10:35:50 +0530223 if (pdata->controller_ver < 0) {
224 dev_warn(hcd->self.controller, "Could not get controller version\n");
Ben Collinsd479c912012-10-19 10:24:12 -0400225 return -ENODEV;
Ramneek Mehresh58c559e2012-03-20 10:35:50 +0530226 }
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200227
228 portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
229 portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
230
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800231 switch (phy_mode) {
232 case FSL_USB2_PHY_ULPI:
Anatolij Gustschinf66dea72012-12-04 14:24:30 +0100233 if (pdata->have_sysif_regs && pdata->controller_ver) {
Ramneek Mehresh58c559e2012-03-20 10:35:50 +0530234 /* controller version 1.6 or above */
Shengzhou Liu3735ba82012-08-22 18:17:00 +0800235 setbits32(non_ehci + FSL_SOC_USB_CTRL,
236 ULPI_PHY_CLK_SEL);
237 /*
238 * Due to controller issue of PHY_CLK_VALID in ULPI
239 * mode, we set USB_CTRL_USB_EN before checking
240 * PHY_CLK_VALID, otherwise PHY_CLK_VALID doesn't work.
241 */
242 clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
243 UTMI_PHY_EN, USB_CTRL_USB_EN);
Ramneek Mehresh58c559e2012-03-20 10:35:50 +0530244 }
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800245 portsc |= PORT_PTS_ULPI;
246 break;
247 case FSL_USB2_PHY_SERIAL:
248 portsc |= PORT_PTS_SERIAL;
249 break;
250 case FSL_USB2_PHY_UTMI_WIDE:
251 portsc |= PORT_PTS_PTW;
252 /* fall through */
253 case FSL_USB2_PHY_UTMI:
Anatolij Gustschinf66dea72012-12-04 14:24:30 +0100254 if (pdata->have_sysif_regs && pdata->controller_ver) {
Ramneek Mehresh58c559e2012-03-20 10:35:50 +0530255 /* controller version 1.6 or above */
Shengzhou Liu3735ba82012-08-22 18:17:00 +0800256 setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
Ramneek Mehresh58c559e2012-03-20 10:35:50 +0530257 mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to
258 become stable - 10ms*/
259 }
Shengzhou Liu28c56ea2012-02-16 18:02:20 +0800260 /* enable UTMI PHY */
Anatolij Gustschinf941f692012-04-10 10:48:11 +0200261 if (pdata->have_sysif_regs)
262 setbits32(non_ehci + FSL_SOC_USB_CTRL,
263 CTRL_UTMI_PHY_EN);
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800264 portsc |= PORT_PTS_UTMI;
265 break;
266 case FSL_USB2_PHY_NONE:
267 break;
268 }
Shengzhou Liu3735ba82012-08-22 18:17:00 +0800269
Anatolij Gustschinf66dea72012-12-04 14:24:30 +0100270 if (pdata->have_sysif_regs && pdata->controller_ver &&
271 (phy_mode == FSL_USB2_PHY_ULPI)) {
Shengzhou Liu3735ba82012-08-22 18:17:00 +0800272 /* check PHY_CLK_VALID to get phy clk valid */
273 if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
274 PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) {
275 printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n");
276 return -EINVAL;
277 }
278 }
279
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100280 ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
Shengzhou Liu3735ba82012-08-22 18:17:00 +0800281
Anatolij Gustschinf66dea72012-12-04 14:24:30 +0100282 if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
Shengzhou Liu3735ba82012-08-22 18:17:00 +0800283 setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
284
285 return 0;
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800286}
287
Shengzhou Liu3735ba82012-08-22 18:17:00 +0800288static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800289{
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200290 struct usb_hcd *hcd = ehci_to_hcd(ehci);
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800291 struct fsl_usb2_platform_data *pdata;
292 void __iomem *non_ehci = hcd->regs;
293
Jingoo Hand4f09e22013-07-30 19:59:40 +0900294 pdata = dev_get_platdata(hcd->self.controller);
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200295
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200296 if (pdata->have_sysif_regs) {
Pan Jiafei4c954322012-02-17 13:57:16 +0800297 /*
298 * Turn on cache snooping hardware, since some PowerPC platforms
299 * wholly rely on hardware to deal with cache coherent
300 */
301
302 /* Setup Snooping for all the 4GB space */
303 /* SNOOP1 starts from 0x0, size 2G */
304 out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
305 /* SNOOP2 starts from 0x80000000, size 2G */
306 out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200307 }
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800308
Li Yangba029782007-05-11 17:09:55 +0800309 if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
310 (pdata->operating_mode == FSL_USB2_DR_OTG))
Shengzhou Liu3735ba82012-08-22 18:17:00 +0800311 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
312 return -EINVAL;
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800313
314 if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
Kumar Gala8cd42e92006-01-20 13:57:52 -0800315 unsigned int chip, rev, svr;
316
317 svr = mfspr(SPRN_SVR);
318 chip = svr >> 16;
319 rev = (svr >> 4) & 0xf;
320
321 /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
322 if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
323 ehci->has_fsl_port_bug = 1;
324
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800325 if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
Shengzhou Liu3735ba82012-08-22 18:17:00 +0800326 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
327 return -EINVAL;
328
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800329 if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
Shengzhou Liu3735ba82012-08-22 18:17:00 +0800330 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1))
331 return -EINVAL;
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800332 }
333
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200334 if (pdata->have_sysif_regs) {
Kumar Gala08d76602012-07-10 06:58:48 -0500335#ifdef CONFIG_FSL_SOC_BOOKE
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200336 out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008);
337 out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000080);
Srikanth Srinivasan4f534252008-07-02 02:14:33 -0500338#else
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200339 out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
340 out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
Srikanth Srinivasan4f534252008-07-02 02:14:33 -0500341#endif
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200342 out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
343 }
Shengzhou Liu3735ba82012-08-22 18:17:00 +0800344
345 return 0;
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800346}
347
348/* called after powerup, by probe or system-pm "wakeup" */
349static int ehci_fsl_reinit(struct ehci_hcd *ehci)
350{
Shengzhou Liu3735ba82012-08-22 18:17:00 +0800351 if (ehci_fsl_usb_setup(ehci))
352 return -EINVAL;
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800353
354 return 0;
355}
356
357/* called during probe() after chip reset completes */
358static int ehci_fsl_setup(struct usb_hcd *hcd)
359{
360 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
361 int retval;
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200362 struct fsl_usb2_platform_data *pdata;
Anatolij Gustschin761bbcb2012-01-24 22:17:38 +0100363 struct device *dev;
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200364
Anatolij Gustschin761bbcb2012-01-24 22:17:38 +0100365 dev = hcd->self.controller;
Jingoo Hand4f09e22013-07-30 19:59:40 +0900366 pdata = dev_get_platdata(hcd->self.controller);
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200367 ehci->big_endian_desc = pdata->big_endian_desc;
368 ehci->big_endian_mmio = pdata->big_endian_mmio;
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800369
370 /* EHCI registers start at offset 0x100 */
371 ehci->caps = hcd->regs + 0x100;
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800372
Christian Engelmayere6604a72013-04-03 12:18:51 +0200373#ifdef CONFIG_PPC_83xx
374 /*
375 * Deal with MPC834X that need port power to be cycled after the power
376 * fault condition is removed. Otherwise the state machine does not
377 * reflect PORTSC[CSC] correctly.
378 */
379 ehci->need_oc_pp_cycle = 1;
380#endif
381
Matthieu CASTET65fd4272010-09-06 18:26:56 +0200382 hcd->has_tt = 1;
383
Alan Stern1a49e2a2012-07-09 15:55:14 -0400384 retval = ehci_setup(hcd);
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800385 if (retval)
386 return retval;
387
Anatolij Gustschin761bbcb2012-01-24 22:17:38 +0100388 if (of_device_is_compatible(dev->parent->of_node,
389 "fsl,mpc5121-usb2-dr")) {
390 /*
391 * set SBUSCFG:AHBBRST so that control msgs don't
392 * fail when doing heavy PATA writes.
393 */
394 ehci_writel(ehci, SBUSCFG_INCR8,
395 hcd->regs + FSL_SOC_USB_SBUSCFG);
396 }
397
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800398 retval = ehci_fsl_reinit(ehci);
399 return retval;
400}
401
Anton Vorontsov1af10772009-12-14 18:41:12 +0300402struct ehci_fsl {
403 struct ehci_hcd ehci;
404
405#ifdef CONFIG_PM
406 /* Saved USB PHY settings, need to restore after deep sleep. */
407 u32 usb_ctrl;
408#endif
409};
410
411#ifdef CONFIG_PM
412
Anatolij Gustschin13b7ee2a2011-04-18 22:01:55 +0200413#ifdef CONFIG_PPC_MPC512x
414static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
415{
416 struct usb_hcd *hcd = dev_get_drvdata(dev);
417 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
Jingoo Hand4f09e22013-07-30 19:59:40 +0900418 struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
Anatolij Gustschin13b7ee2a2011-04-18 22:01:55 +0200419 u32 tmp;
420
421#ifdef DEBUG
422 u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
423 mode &= USBMODE_CM_MASK;
424 tmp = ehci_readl(ehci, hcd->regs + 0x140); /* usbcmd */
425
426 dev_dbg(dev, "suspend=%d already_suspended=%d "
427 "mode=%d usbcmd %08x\n", pdata->suspended,
428 pdata->already_suspended, mode, tmp);
429#endif
430
431 /*
432 * If the controller is already suspended, then this must be a
433 * PM suspend. Remember this fact, so that we will leave the
434 * controller suspended at PM resume time.
435 */
436 if (pdata->suspended) {
437 dev_dbg(dev, "already suspended, leaving early\n");
438 pdata->already_suspended = 1;
439 return 0;
440 }
441
442 dev_dbg(dev, "suspending...\n");
443
Alan Sterne8799902011-08-18 16:31:30 -0400444 ehci->rh_state = EHCI_RH_SUSPENDED;
Anatolij Gustschin13b7ee2a2011-04-18 22:01:55 +0200445 dev->power.power_state = PMSG_SUSPEND;
446
447 /* ignore non-host interrupts */
448 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
449
450 /* stop the controller */
451 tmp = ehci_readl(ehci, &ehci->regs->command);
452 tmp &= ~CMD_RUN;
453 ehci_writel(ehci, tmp, &ehci->regs->command);
454
455 /* save EHCI registers */
456 pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
457 pdata->pm_command &= ~CMD_RUN;
458 pdata->pm_status = ehci_readl(ehci, &ehci->regs->status);
459 pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable);
460 pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index);
461 pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment);
462 pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list);
463 pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next);
464 pdata->pm_configured_flag =
465 ehci_readl(ehci, &ehci->regs->configured_flag);
466 pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
467 pdata->pm_usbgenctrl = ehci_readl(ehci,
468 hcd->regs + FSL_SOC_USB_USBGENCTRL);
469
470 /* clear the W1C bits */
471 pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
472
473 pdata->suspended = 1;
474
475 /* clear PP to cut power to the port */
476 tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
477 tmp &= ~PORT_POWER;
478 ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
479
480 return 0;
481}
482
483static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
484{
485 struct usb_hcd *hcd = dev_get_drvdata(dev);
486 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
Jingoo Hand4f09e22013-07-30 19:59:40 +0900487 struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
Anatolij Gustschin13b7ee2a2011-04-18 22:01:55 +0200488 u32 tmp;
489
490 dev_dbg(dev, "suspend=%d already_suspended=%d\n",
491 pdata->suspended, pdata->already_suspended);
492
493 /*
494 * If the controller was already suspended at suspend time,
495 * then don't resume it now.
496 */
497 if (pdata->already_suspended) {
498 dev_dbg(dev, "already suspended, leaving early\n");
499 pdata->already_suspended = 0;
500 return 0;
501 }
502
503 if (!pdata->suspended) {
504 dev_dbg(dev, "not suspended, leaving early\n");
505 return 0;
506 }
507
508 pdata->suspended = 0;
509
510 dev_dbg(dev, "resuming...\n");
511
512 /* set host mode */
513 tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
514 ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
515
516 ehci_writel(ehci, pdata->pm_usbgenctrl,
517 hcd->regs + FSL_SOC_USB_USBGENCTRL);
518 ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
519 hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
520
Anatolij Gustschin761bbcb2012-01-24 22:17:38 +0100521 ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
522
Anatolij Gustschin13b7ee2a2011-04-18 22:01:55 +0200523 /* restore EHCI registers */
524 ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
525 ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
526 ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
527 ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
528 ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
529 ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
530 ehci_writel(ehci, pdata->pm_configured_flag,
531 &ehci->regs->configured_flag);
532 ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
533
534 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
Alan Sterne8799902011-08-18 16:31:30 -0400535 ehci->rh_state = EHCI_RH_RUNNING;
Anatolij Gustschin13b7ee2a2011-04-18 22:01:55 +0200536 dev->power.power_state = PMSG_ON;
537
538 tmp = ehci_readl(ehci, &ehci->regs->command);
539 tmp |= CMD_RUN;
540 ehci_writel(ehci, tmp, &ehci->regs->command);
541
542 usb_hcd_resume_root_hub(hcd);
543
544 return 0;
545}
546#else
547static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
548{
549 return 0;
550}
551
552static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev)
553{
554 return 0;
555}
556#endif /* CONFIG_PPC_MPC512x */
557
Anton Vorontsov1af10772009-12-14 18:41:12 +0300558static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
559{
560 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
561
562 return container_of(ehci, struct ehci_fsl, ehci);
563}
564
565static int ehci_fsl_drv_suspend(struct device *dev)
566{
567 struct usb_hcd *hcd = dev_get_drvdata(dev);
568 struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
569 void __iomem *non_ehci = hcd->regs;
570
Anatolij Gustschin13b7ee2a2011-04-18 22:01:55 +0200571 if (of_device_is_compatible(dev->parent->of_node,
572 "fsl,mpc5121-usb2-dr")) {
573 return ehci_fsl_mpc512x_drv_suspend(dev);
574 }
575
Alan Stern41472002010-06-25 14:02:14 -0400576 ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
577 device_may_wakeup(dev));
Anton Vorontsov1af10772009-12-14 18:41:12 +0300578 if (!fsl_deep_sleep())
579 return 0;
580
581 ehci_fsl->usb_ctrl = in_be32(non_ehci + FSL_SOC_USB_CTRL);
582 return 0;
583}
584
585static int ehci_fsl_drv_resume(struct device *dev)
586{
587 struct usb_hcd *hcd = dev_get_drvdata(dev);
588 struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
589 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
590 void __iomem *non_ehci = hcd->regs;
591
Anatolij Gustschin13b7ee2a2011-04-18 22:01:55 +0200592 if (of_device_is_compatible(dev->parent->of_node,
593 "fsl,mpc5121-usb2-dr")) {
594 return ehci_fsl_mpc512x_drv_resume(dev);
595 }
596
Alan Stern16032c42010-05-12 18:21:35 -0400597 ehci_prepare_ports_for_controller_resume(ehci);
Anton Vorontsov1af10772009-12-14 18:41:12 +0300598 if (!fsl_deep_sleep())
599 return 0;
600
601 usb_root_hub_lost_power(hcd->self.root_hub);
602
603 /* Restore USB PHY settings and enable the controller. */
604 out_be32(non_ehci + FSL_SOC_USB_CTRL, ehci_fsl->usb_ctrl);
605
606 ehci_reset(ehci);
607 ehci_fsl_reinit(ehci);
608
609 return 0;
610}
611
612static int ehci_fsl_drv_restore(struct device *dev)
613{
614 struct usb_hcd *hcd = dev_get_drvdata(dev);
615
616 usb_root_hub_lost_power(hcd->self.root_hub);
617 return 0;
618}
619
620static struct dev_pm_ops ehci_fsl_pm_ops = {
621 .suspend = ehci_fsl_drv_suspend,
622 .resume = ehci_fsl_drv_resume,
623 .restore = ehci_fsl_drv_restore,
624};
625
626#define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops)
627#else
628#define EHCI_FSL_PM_OPS NULL
629#endif /* CONFIG_PM */
630
Anatolij Gustschin83722bc2011-04-18 22:02:00 +0200631#ifdef CONFIG_USB_OTG
632static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
633{
634 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
635 u32 status;
636
637 if (!port)
638 return -EINVAL;
639
640 port--;
641
642 /* start port reset before HNP protocol time out */
643 status = readl(&ehci->regs->port_status[port]);
644 if (!(status & PORT_CONNECT))
645 return -ENODEV;
646
647 /* khubd will finish the reset later */
648 if (ehci_is_TDI(ehci)) {
649 writel(PORT_RESET |
650 (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)),
651 &ehci->regs->port_status[port]);
652 } else {
653 writel(PORT_RESET, &ehci->regs->port_status[port]);
654 }
655
656 return 0;
657}
658#else
659#define ehci_start_port_reset NULL
660#endif /* CONFIG_USB_OTG */
661
662
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800663static const struct hc_driver ehci_fsl_hc_driver = {
664 .description = hcd_name,
665 .product_desc = "Freescale On-Chip EHCI Host Controller",
Anton Vorontsov1af10772009-12-14 18:41:12 +0300666 .hcd_priv_size = sizeof(struct ehci_fsl),
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800667
668 /*
669 * generic hardware linkage
670 */
671 .irq = ehci_irq,
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200672 .flags = HCD_USB2 | HCD_MEMORY,
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800673
674 /*
675 * basic lifecycle operations
676 */
677 .reset = ehci_fsl_setup,
678 .start = ehci_run,
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800679 .stop = ehci_stop,
Aleksey Gorelov64a21d02006-08-08 17:24:08 -0700680 .shutdown = ehci_shutdown,
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800681
682 /*
683 * managing i/o requests and associated device resources
684 */
685 .urb_enqueue = ehci_urb_enqueue,
686 .urb_dequeue = ehci_urb_dequeue,
687 .endpoint_disable = ehci_endpoint_disable,
Alan Sternb18ffd42009-05-27 18:21:56 -0400688 .endpoint_reset = ehci_endpoint_reset,
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800689
690 /*
691 * scheduling support
692 */
693 .get_frame_number = ehci_get_frame,
694
695 /*
696 * root hub support
697 */
698 .hub_status_data = ehci_hub_status_data,
699 .hub_control = ehci_hub_control,
700 .bus_suspend = ehci_bus_suspend,
701 .bus_resume = ehci_bus_resume,
Anatolij Gustschin83722bc2011-04-18 22:02:00 +0200702 .start_port_reset = ehci_start_port_reset,
Balaji Rao90da0962007-11-22 01:58:14 +0530703 .relinquish_port = ehci_relinquish_port,
Alan Stern3a311552008-05-20 16:58:29 -0400704 .port_handed_over = ehci_port_handed_over,
Alan Stern914b7012009-06-29 10:47:30 -0400705
706 .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800707};
708
709static int ehci_fsl_drv_probe(struct platform_device *pdev)
710{
711 if (usb_disabled())
712 return -ENODEV;
713
David Brownell135db042008-02-11 18:40:46 -0800714 /* FIXME we only want one one probe() not two */
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800715 return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
716}
717
718static int ehci_fsl_drv_remove(struct platform_device *pdev)
719{
720 struct usb_hcd *hcd = platform_get_drvdata(pdev);
721
David Brownell135db042008-02-11 18:40:46 -0800722 /* FIXME we only want one one remove() not two */
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800723 usb_hcd_fsl_remove(hcd, pdev);
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800724 return 0;
725}
726
David Brownell135db042008-02-11 18:40:46 -0800727MODULE_ALIAS("platform:fsl-ehci");
Kumar Gala01cced22006-04-11 10:07:16 -0500728
729static struct platform_driver ehci_fsl_driver = {
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800730 .probe = ehci_fsl_drv_probe,
731 .remove = ehci_fsl_drv_remove,
Aleksey Gorelov64a21d02006-08-08 17:24:08 -0700732 .shutdown = usb_hcd_platform_shutdown,
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800733 .driver = {
Anton Vorontsov1af10772009-12-14 18:41:12 +0300734 .name = "fsl-ehci",
Libo Chen9e873d42013-05-11 00:48:23 +0800735 .owner = THIS_MODULE,
Anton Vorontsov1af10772009-12-14 18:41:12 +0300736 .pm = EHCI_FSL_PM_OPS,
David Brownell135db042008-02-11 18:40:46 -0800737 },
Randy Vinson80cb9ae2006-01-20 13:53:38 -0800738};