Pratyush Anand | ce21bfe | 2014-07-14 19:27:49 +0530 | [diff] [blame] | 1 | /* |
| 2 | * drivers/usb/misc/lvstest.c |
| 3 | * |
| 4 | * Test pattern generation for Link Layer Validation System Tests |
| 5 | * |
| 6 | * Copyright (C) 2014 ST Microelectronics |
| 7 | * Pratyush Anand <pratyush.anand@st.com> |
| 8 | * |
| 9 | * This file is licensed under the terms of the GNU General Public |
| 10 | * License version 2. This program is licensed "as is" without any |
| 11 | * warranty of any kind, whether express or implied. |
| 12 | */ |
| 13 | |
| 14 | #include <linux/init.h> |
| 15 | #include <linux/kernel.h> |
| 16 | #include <linux/module.h> |
| 17 | #include <linux/platform_device.h> |
| 18 | #include <linux/slab.h> |
| 19 | #include <linux/usb.h> |
| 20 | #include <linux/usb/ch11.h> |
| 21 | #include <linux/usb/hcd.h> |
| 22 | #include <linux/usb/phy.h> |
| 23 | |
| 24 | struct lvs_rh { |
| 25 | /* root hub interface */ |
| 26 | struct usb_interface *intf; |
| 27 | /* if lvs device connected */ |
| 28 | bool present; |
| 29 | /* port no at which lvs device is present */ |
| 30 | int portnum; |
| 31 | /* urb buffer */ |
| 32 | u8 buffer[8]; |
| 33 | /* class descriptor */ |
| 34 | struct usb_hub_descriptor descriptor; |
| 35 | /* urb for polling interrupt pipe */ |
| 36 | struct urb *urb; |
| 37 | /* LVS RH work queue */ |
| 38 | struct workqueue_struct *rh_queue; |
| 39 | /* LVH RH work */ |
| 40 | struct work_struct rh_work; |
| 41 | /* RH port status */ |
| 42 | struct usb_port_status port_status; |
| 43 | }; |
| 44 | |
| 45 | static struct usb_device *create_lvs_device(struct usb_interface *intf) |
| 46 | { |
| 47 | struct usb_device *udev, *hdev; |
| 48 | struct usb_hcd *hcd; |
| 49 | struct lvs_rh *lvs = usb_get_intfdata(intf); |
| 50 | |
| 51 | if (!lvs->present) { |
| 52 | dev_err(&intf->dev, "No LVS device is present\n"); |
| 53 | return NULL; |
| 54 | } |
| 55 | |
| 56 | hdev = interface_to_usbdev(intf); |
| 57 | hcd = bus_to_hcd(hdev->bus); |
| 58 | |
| 59 | udev = usb_alloc_dev(hdev, hdev->bus, lvs->portnum); |
| 60 | if (!udev) { |
| 61 | dev_err(&intf->dev, "Could not allocate lvs udev\n"); |
| 62 | return NULL; |
| 63 | } |
| 64 | udev->speed = USB_SPEED_SUPER; |
| 65 | udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512); |
| 66 | usb_set_device_state(udev, USB_STATE_DEFAULT); |
| 67 | |
| 68 | if (hcd->driver->enable_device) { |
| 69 | if (hcd->driver->enable_device(hcd, udev) < 0) { |
| 70 | dev_err(&intf->dev, "Failed to enable\n"); |
| 71 | usb_put_dev(udev); |
| 72 | return NULL; |
| 73 | } |
| 74 | } |
| 75 | |
| 76 | return udev; |
| 77 | } |
| 78 | |
| 79 | static void destroy_lvs_device(struct usb_device *udev) |
| 80 | { |
| 81 | struct usb_device *hdev = udev->parent; |
| 82 | struct usb_hcd *hcd = bus_to_hcd(hdev->bus); |
| 83 | |
| 84 | if (hcd->driver->free_dev) |
| 85 | hcd->driver->free_dev(hcd, udev); |
| 86 | |
| 87 | usb_put_dev(udev); |
| 88 | } |
| 89 | |
| 90 | static int lvs_rh_clear_port_feature(struct usb_device *hdev, |
| 91 | int port1, int feature) |
| 92 | { |
| 93 | return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), |
| 94 | USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port1, |
| 95 | NULL, 0, 1000); |
| 96 | } |
| 97 | |
| 98 | static int lvs_rh_set_port_feature(struct usb_device *hdev, |
| 99 | int port1, int feature) |
| 100 | { |
| 101 | return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), |
| 102 | USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port1, |
| 103 | NULL, 0, 1000); |
| 104 | } |
| 105 | |
| 106 | static ssize_t u3_entry_store(struct device *dev, |
| 107 | struct device_attribute *attr, const char *buf, size_t count) |
| 108 | { |
| 109 | struct usb_interface *intf = to_usb_interface(dev); |
| 110 | struct usb_device *hdev = interface_to_usbdev(intf); |
| 111 | struct lvs_rh *lvs = usb_get_intfdata(intf); |
| 112 | struct usb_device *udev; |
| 113 | int ret; |
| 114 | |
| 115 | udev = create_lvs_device(intf); |
| 116 | if (!udev) { |
| 117 | dev_err(dev, "failed to create lvs device\n"); |
| 118 | return -ENOMEM; |
| 119 | } |
| 120 | |
| 121 | ret = lvs_rh_set_port_feature(hdev, lvs->portnum, |
| 122 | USB_PORT_FEAT_SUSPEND); |
| 123 | if (ret < 0) |
| 124 | dev_err(dev, "can't issue U3 entry %d\n", ret); |
| 125 | |
| 126 | destroy_lvs_device(udev); |
| 127 | |
| 128 | if (ret < 0) |
| 129 | return ret; |
| 130 | |
| 131 | return count; |
| 132 | } |
| 133 | static DEVICE_ATTR_WO(u3_entry); |
| 134 | |
| 135 | static ssize_t u3_exit_store(struct device *dev, |
| 136 | struct device_attribute *attr, const char *buf, size_t count) |
| 137 | { |
| 138 | struct usb_interface *intf = to_usb_interface(dev); |
| 139 | struct usb_device *hdev = interface_to_usbdev(intf); |
| 140 | struct lvs_rh *lvs = usb_get_intfdata(intf); |
| 141 | struct usb_device *udev; |
| 142 | int ret; |
| 143 | |
| 144 | udev = create_lvs_device(intf); |
| 145 | if (!udev) { |
| 146 | dev_err(dev, "failed to create lvs device\n"); |
| 147 | return -ENOMEM; |
| 148 | } |
| 149 | |
| 150 | ret = lvs_rh_clear_port_feature(hdev, lvs->portnum, |
| 151 | USB_PORT_FEAT_SUSPEND); |
| 152 | if (ret < 0) |
| 153 | dev_err(dev, "can't issue U3 exit %d\n", ret); |
| 154 | |
| 155 | destroy_lvs_device(udev); |
| 156 | |
| 157 | if (ret < 0) |
| 158 | return ret; |
| 159 | |
| 160 | return count; |
| 161 | } |
| 162 | static DEVICE_ATTR_WO(u3_exit); |
| 163 | |
| 164 | static ssize_t hot_reset_store(struct device *dev, |
| 165 | struct device_attribute *attr, const char *buf, size_t count) |
| 166 | { |
| 167 | struct usb_interface *intf = to_usb_interface(dev); |
| 168 | struct usb_device *hdev = interface_to_usbdev(intf); |
| 169 | struct lvs_rh *lvs = usb_get_intfdata(intf); |
| 170 | int ret; |
| 171 | |
| 172 | ret = lvs_rh_set_port_feature(hdev, lvs->portnum, |
| 173 | USB_PORT_FEAT_RESET); |
| 174 | if (ret < 0) { |
| 175 | dev_err(dev, "can't issue hot reset %d\n", ret); |
| 176 | return ret; |
| 177 | } |
| 178 | |
| 179 | return count; |
| 180 | } |
| 181 | static DEVICE_ATTR_WO(hot_reset); |
| 182 | |
| 183 | static ssize_t u2_timeout_store(struct device *dev, |
| 184 | struct device_attribute *attr, const char *buf, size_t count) |
| 185 | { |
| 186 | struct usb_interface *intf = to_usb_interface(dev); |
| 187 | struct usb_device *hdev = interface_to_usbdev(intf); |
| 188 | struct lvs_rh *lvs = usb_get_intfdata(intf); |
| 189 | unsigned long val; |
| 190 | int ret; |
| 191 | |
| 192 | ret = kstrtoul(buf, 10, &val); |
| 193 | if (ret < 0) { |
| 194 | dev_err(dev, "couldn't parse string %d\n", ret); |
| 195 | return ret; |
| 196 | } |
| 197 | |
| 198 | if (val < 0 || val > 127) |
| 199 | return -EINVAL; |
| 200 | |
| 201 | ret = lvs_rh_set_port_feature(hdev, lvs->portnum | (val << 8), |
| 202 | USB_PORT_FEAT_U2_TIMEOUT); |
| 203 | if (ret < 0) { |
| 204 | dev_err(dev, "Error %d while setting U2 timeout %ld\n", ret, val); |
| 205 | return ret; |
| 206 | } |
| 207 | |
| 208 | return count; |
| 209 | } |
| 210 | static DEVICE_ATTR_WO(u2_timeout); |
| 211 | |
| 212 | static ssize_t u1_timeout_store(struct device *dev, |
| 213 | struct device_attribute *attr, const char *buf, size_t count) |
| 214 | { |
| 215 | struct usb_interface *intf = to_usb_interface(dev); |
| 216 | struct usb_device *hdev = interface_to_usbdev(intf); |
| 217 | struct lvs_rh *lvs = usb_get_intfdata(intf); |
| 218 | unsigned long val; |
| 219 | int ret; |
| 220 | |
| 221 | ret = kstrtoul(buf, 10, &val); |
| 222 | if (ret < 0) { |
| 223 | dev_err(dev, "couldn't parse string %d\n", ret); |
| 224 | return ret; |
| 225 | } |
| 226 | |
| 227 | if (val < 0 || val > 127) |
| 228 | return -EINVAL; |
| 229 | |
| 230 | ret = lvs_rh_set_port_feature(hdev, lvs->portnum | (val << 8), |
| 231 | USB_PORT_FEAT_U1_TIMEOUT); |
| 232 | if (ret < 0) { |
| 233 | dev_err(dev, "Error %d while setting U1 timeout %ld\n", ret, val); |
| 234 | return ret; |
| 235 | } |
| 236 | |
| 237 | return count; |
| 238 | } |
| 239 | static DEVICE_ATTR_WO(u1_timeout); |
| 240 | |
| 241 | static ssize_t get_dev_desc_store(struct device *dev, |
| 242 | struct device_attribute *attr, const char *buf, size_t count) |
| 243 | { |
| 244 | struct usb_interface *intf = to_usb_interface(dev); |
| 245 | struct usb_device *udev; |
| 246 | struct usb_device_descriptor *descriptor; |
| 247 | int ret; |
| 248 | |
| 249 | descriptor = kmalloc(sizeof(*descriptor), GFP_KERNEL); |
| 250 | if (!descriptor) { |
| 251 | dev_err(dev, "failed to allocate descriptor memory\n"); |
| 252 | return -ENOMEM; |
| 253 | } |
| 254 | |
| 255 | udev = create_lvs_device(intf); |
| 256 | if (!udev) { |
| 257 | dev_err(dev, "failed to create lvs device\n"); |
| 258 | ret = -ENOMEM; |
| 259 | goto free_desc; |
| 260 | } |
| 261 | |
| 262 | ret = usb_control_msg(udev, (PIPE_CONTROL << 30) | USB_DIR_IN, |
| 263 | USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, USB_DT_DEVICE << 8, |
| 264 | 0, descriptor, sizeof(*descriptor), |
| 265 | USB_CTRL_GET_TIMEOUT); |
| 266 | if (ret < 0) |
| 267 | dev_err(dev, "can't read device descriptor %d\n", ret); |
| 268 | |
| 269 | destroy_lvs_device(udev); |
| 270 | |
| 271 | free_desc: |
| 272 | kfree(descriptor); |
| 273 | |
| 274 | if (ret < 0) |
| 275 | return ret; |
| 276 | |
| 277 | return count; |
| 278 | } |
| 279 | static DEVICE_ATTR_WO(get_dev_desc); |
| 280 | |
| 281 | static struct attribute *lvs_attributes[] = { |
| 282 | &dev_attr_get_dev_desc.attr, |
| 283 | &dev_attr_u1_timeout.attr, |
| 284 | &dev_attr_u2_timeout.attr, |
| 285 | &dev_attr_hot_reset.attr, |
| 286 | &dev_attr_u3_entry.attr, |
| 287 | &dev_attr_u3_exit.attr, |
| 288 | NULL |
| 289 | }; |
| 290 | |
| 291 | static const struct attribute_group lvs_attr_group = { |
| 292 | .attrs = lvs_attributes, |
| 293 | }; |
| 294 | |
| 295 | static void lvs_rh_work(struct work_struct *work) |
| 296 | { |
| 297 | struct lvs_rh *lvs = container_of(work, struct lvs_rh, rh_work); |
| 298 | struct usb_interface *intf = lvs->intf; |
| 299 | struct usb_device *hdev = interface_to_usbdev(intf); |
| 300 | struct usb_hcd *hcd = bus_to_hcd(hdev->bus); |
| 301 | struct usb_hub_descriptor *descriptor = &lvs->descriptor; |
| 302 | struct usb_port_status *port_status = &lvs->port_status; |
| 303 | int i, ret = 0; |
| 304 | u16 portchange; |
| 305 | |
| 306 | /* Examine each root port */ |
| 307 | for (i = 1; i <= descriptor->bNbrPorts; i++) { |
| 308 | ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), |
| 309 | USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, i, |
| 310 | port_status, sizeof(*port_status), 1000); |
| 311 | if (ret < 4) |
| 312 | continue; |
| 313 | |
Pratyush Anand | b1bd3f1 | 2014-07-21 10:16:53 +0530 | [diff] [blame] | 314 | portchange = le16_to_cpu(port_status->wPortChange); |
Pratyush Anand | ce21bfe | 2014-07-14 19:27:49 +0530 | [diff] [blame] | 315 | |
| 316 | if (portchange & USB_PORT_STAT_C_LINK_STATE) |
| 317 | lvs_rh_clear_port_feature(hdev, i, |
| 318 | USB_PORT_FEAT_C_PORT_LINK_STATE); |
| 319 | if (portchange & USB_PORT_STAT_C_ENABLE) |
| 320 | lvs_rh_clear_port_feature(hdev, i, |
| 321 | USB_PORT_FEAT_C_ENABLE); |
| 322 | if (portchange & USB_PORT_STAT_C_RESET) |
| 323 | lvs_rh_clear_port_feature(hdev, i, |
| 324 | USB_PORT_FEAT_C_RESET); |
| 325 | if (portchange & USB_PORT_STAT_C_BH_RESET) |
| 326 | lvs_rh_clear_port_feature(hdev, i, |
| 327 | USB_PORT_FEAT_C_BH_PORT_RESET); |
| 328 | if (portchange & USB_PORT_STAT_C_CONNECTION) { |
| 329 | lvs_rh_clear_port_feature(hdev, i, |
| 330 | USB_PORT_FEAT_C_CONNECTION); |
| 331 | |
Pratyush Anand | b1bd3f1 | 2014-07-21 10:16:53 +0530 | [diff] [blame] | 332 | if (le16_to_cpu(port_status->wPortStatus) & |
Pratyush Anand | ce21bfe | 2014-07-14 19:27:49 +0530 | [diff] [blame] | 333 | USB_PORT_STAT_CONNECTION) { |
| 334 | lvs->present = true; |
| 335 | lvs->portnum = i; |
Antoine Tenart | 3d46e73 | 2014-09-24 23:05:50 +0400 | [diff] [blame] | 336 | if (hcd->usb_phy) |
| 337 | usb_phy_notify_connect(hcd->usb_phy, |
Pratyush Anand | ce21bfe | 2014-07-14 19:27:49 +0530 | [diff] [blame] | 338 | USB_SPEED_SUPER); |
| 339 | } else { |
| 340 | lvs->present = false; |
Antoine Tenart | 3d46e73 | 2014-09-24 23:05:50 +0400 | [diff] [blame] | 341 | if (hcd->usb_phy) |
| 342 | usb_phy_notify_disconnect(hcd->usb_phy, |
Pratyush Anand | ce21bfe | 2014-07-14 19:27:49 +0530 | [diff] [blame] | 343 | USB_SPEED_SUPER); |
| 344 | } |
| 345 | break; |
| 346 | } |
| 347 | } |
| 348 | |
| 349 | ret = usb_submit_urb(lvs->urb, GFP_KERNEL); |
| 350 | if (ret != 0 && ret != -ENODEV && ret != -EPERM) |
| 351 | dev_err(&intf->dev, "urb resubmit error %d\n", ret); |
| 352 | } |
| 353 | |
| 354 | static void lvs_rh_irq(struct urb *urb) |
| 355 | { |
| 356 | struct lvs_rh *lvs = urb->context; |
| 357 | |
| 358 | queue_work(lvs->rh_queue, &lvs->rh_work); |
| 359 | } |
| 360 | |
| 361 | static int lvs_rh_probe(struct usb_interface *intf, |
| 362 | const struct usb_device_id *id) |
| 363 | { |
| 364 | struct usb_device *hdev; |
| 365 | struct usb_host_interface *desc; |
| 366 | struct usb_endpoint_descriptor *endpoint; |
| 367 | struct lvs_rh *lvs; |
| 368 | unsigned int pipe; |
| 369 | int ret, maxp; |
| 370 | |
| 371 | hdev = interface_to_usbdev(intf); |
| 372 | desc = intf->cur_altsetting; |
| 373 | endpoint = &desc->endpoint[0].desc; |
| 374 | |
| 375 | /* valid only for SS root hub */ |
| 376 | if (hdev->descriptor.bDeviceProtocol != USB_HUB_PR_SS || hdev->parent) { |
| 377 | dev_err(&intf->dev, "Bind LVS driver with SS root Hub only\n"); |
| 378 | return -EINVAL; |
| 379 | } |
| 380 | |
| 381 | lvs = devm_kzalloc(&intf->dev, sizeof(*lvs), GFP_KERNEL); |
| 382 | if (!lvs) |
| 383 | return -ENOMEM; |
| 384 | |
| 385 | lvs->intf = intf; |
| 386 | usb_set_intfdata(intf, lvs); |
| 387 | |
| 388 | /* how many number of ports this root hub has */ |
| 389 | ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), |
| 390 | USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB, |
| 391 | USB_DT_SS_HUB << 8, 0, &lvs->descriptor, |
| 392 | USB_DT_SS_HUB_SIZE, USB_CTRL_GET_TIMEOUT); |
| 393 | if (ret < (USB_DT_HUB_NONVAR_SIZE + 2)) { |
| 394 | dev_err(&hdev->dev, "wrong root hub descriptor read %d\n", ret); |
| 395 | return ret; |
| 396 | } |
| 397 | |
| 398 | /* submit urb to poll interrupt endpoint */ |
| 399 | lvs->urb = usb_alloc_urb(0, GFP_KERNEL); |
| 400 | if (!lvs->urb) { |
| 401 | dev_err(&intf->dev, "couldn't allocate lvs urb\n"); |
| 402 | return -ENOMEM; |
| 403 | } |
| 404 | |
| 405 | lvs->rh_queue = create_singlethread_workqueue("lvs_rh_queue"); |
| 406 | if (!lvs->rh_queue) { |
| 407 | dev_err(&intf->dev, "couldn't create workqueue\n"); |
| 408 | ret = -ENOMEM; |
| 409 | goto free_urb; |
| 410 | } |
| 411 | |
| 412 | INIT_WORK(&lvs->rh_work, lvs_rh_work); |
| 413 | |
| 414 | ret = sysfs_create_group(&intf->dev.kobj, &lvs_attr_group); |
| 415 | if (ret < 0) { |
| 416 | dev_err(&intf->dev, "Failed to create sysfs node %d\n", ret); |
| 417 | goto destroy_queue; |
| 418 | } |
| 419 | |
| 420 | pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress); |
| 421 | maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe)); |
| 422 | usb_fill_int_urb(lvs->urb, hdev, pipe, &lvs->buffer[0], maxp, |
| 423 | lvs_rh_irq, lvs, endpoint->bInterval); |
| 424 | |
| 425 | ret = usb_submit_urb(lvs->urb, GFP_KERNEL); |
| 426 | if (ret < 0) { |
| 427 | dev_err(&intf->dev, "couldn't submit lvs urb %d\n", ret); |
| 428 | goto sysfs_remove; |
| 429 | } |
| 430 | |
| 431 | return ret; |
| 432 | |
| 433 | sysfs_remove: |
| 434 | sysfs_remove_group(&intf->dev.kobj, &lvs_attr_group); |
| 435 | destroy_queue: |
| 436 | destroy_workqueue(lvs->rh_queue); |
| 437 | free_urb: |
| 438 | usb_free_urb(lvs->urb); |
| 439 | return ret; |
| 440 | } |
| 441 | |
| 442 | static void lvs_rh_disconnect(struct usb_interface *intf) |
| 443 | { |
| 444 | struct lvs_rh *lvs = usb_get_intfdata(intf); |
| 445 | |
| 446 | sysfs_remove_group(&intf->dev.kobj, &lvs_attr_group); |
| 447 | destroy_workqueue(lvs->rh_queue); |
| 448 | usb_free_urb(lvs->urb); |
| 449 | } |
| 450 | |
| 451 | static struct usb_driver lvs_driver = { |
| 452 | .name = "lvs", |
| 453 | .probe = lvs_rh_probe, |
| 454 | .disconnect = lvs_rh_disconnect, |
| 455 | }; |
| 456 | |
| 457 | module_usb_driver(lvs_driver); |
| 458 | |
| 459 | MODULE_DESCRIPTION("Link Layer Validation System Driver"); |
| 460 | MODULE_LICENSE("GPL"); |