Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | sis5595.c - Part of lm_sensors, Linux kernel modules for hardware |
| 3 | monitoring |
| 4 | Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and |
| 5 | Philip Edelbrock <phil@netroedge.com> |
| 6 | |
| 7 | This program is free software; you can redistribute it and/or modify |
| 8 | it under the terms of the GNU General Public License as published by |
| 9 | the Free Software Foundation; either version 2 of the License, or |
| 10 | (at your option) any later version. |
| 11 | |
| 12 | This program is distributed in the hope that it will be useful, |
| 13 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | GNU General Public License for more details. |
| 16 | |
| 17 | You should have received a copy of the GNU General Public License |
| 18 | along with this program; if not, write to the Free Software |
| 19 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 20 | */ |
| 21 | |
| 22 | /* Note: we assume there can only be one SIS5595 with one SMBus interface */ |
| 23 | |
| 24 | /* |
| 25 | Note: all have mfr. ID 0x1039. |
| 26 | SUPPORTED PCI ID |
| 27 | 5595 0008 |
| 28 | |
| 29 | Note: these chips contain a 0008 device which is incompatible with the |
| 30 | 5595. We recognize these by the presence of the listed |
| 31 | "blacklist" PCI ID and refuse to load. |
| 32 | |
| 33 | NOT SUPPORTED PCI ID BLACKLIST PCI ID |
| 34 | 540 0008 0540 |
| 35 | 550 0008 0550 |
| 36 | 5513 0008 5511 |
| 37 | 5581 0008 5597 |
| 38 | 5582 0008 5597 |
| 39 | 5597 0008 5597 |
| 40 | 5598 0008 5597/5598 |
| 41 | 630 0008 0630 |
| 42 | 645 0008 0645 |
| 43 | 646 0008 0646 |
| 44 | 648 0008 0648 |
| 45 | 650 0008 0650 |
| 46 | 651 0008 0651 |
| 47 | 730 0008 0730 |
| 48 | 735 0008 0735 |
| 49 | 745 0008 0745 |
| 50 | 746 0008 0746 |
| 51 | */ |
| 52 | |
| 53 | /* TO DO: |
| 54 | * Add Block Transfers (ugly, but supported by the adapter) |
| 55 | * Add adapter resets |
| 56 | */ |
| 57 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 58 | #include <linux/kernel.h> |
| 59 | #include <linux/module.h> |
| 60 | #include <linux/delay.h> |
| 61 | #include <linux/pci.h> |
| 62 | #include <linux/ioport.h> |
| 63 | #include <linux/init.h> |
| 64 | #include <linux/i2c.h> |
| 65 | #include <asm/io.h> |
| 66 | |
| 67 | static int blacklist[] = { |
| 68 | PCI_DEVICE_ID_SI_540, |
| 69 | PCI_DEVICE_ID_SI_550, |
| 70 | PCI_DEVICE_ID_SI_630, |
| 71 | PCI_DEVICE_ID_SI_645, |
| 72 | PCI_DEVICE_ID_SI_646, |
| 73 | PCI_DEVICE_ID_SI_648, |
| 74 | PCI_DEVICE_ID_SI_650, |
| 75 | PCI_DEVICE_ID_SI_651, |
| 76 | PCI_DEVICE_ID_SI_730, |
| 77 | PCI_DEVICE_ID_SI_735, |
| 78 | PCI_DEVICE_ID_SI_745, |
| 79 | PCI_DEVICE_ID_SI_746, |
| 80 | PCI_DEVICE_ID_SI_5511, /* 5513 chip has the 0008 device but that ID |
| 81 | shows up in other chips so we use the 5511 |
| 82 | ID for recognition */ |
| 83 | PCI_DEVICE_ID_SI_5597, |
| 84 | PCI_DEVICE_ID_SI_5598, |
| 85 | 0, /* terminates the list */ |
| 86 | }; |
| 87 | |
| 88 | /* Length of ISA address segment */ |
| 89 | #define SIS5595_EXTENT 8 |
| 90 | /* SIS5595 SMBus registers */ |
| 91 | #define SMB_STS_LO 0x00 |
| 92 | #define SMB_STS_HI 0x01 |
| 93 | #define SMB_CTL_LO 0x02 |
| 94 | #define SMB_CTL_HI 0x03 |
| 95 | #define SMB_ADDR 0x04 |
| 96 | #define SMB_CMD 0x05 |
| 97 | #define SMB_PCNT 0x06 |
| 98 | #define SMB_CNT 0x07 |
| 99 | #define SMB_BYTE 0x08 |
| 100 | #define SMB_DEV 0x10 |
| 101 | #define SMB_DB0 0x11 |
| 102 | #define SMB_DB1 0x12 |
| 103 | #define SMB_HAA 0x13 |
| 104 | |
| 105 | /* PCI Address Constants */ |
| 106 | #define SMB_INDEX 0x38 |
| 107 | #define SMB_DAT 0x39 |
| 108 | #define SIS5595_ENABLE_REG 0x40 |
| 109 | #define ACPI_BASE 0x90 |
| 110 | |
| 111 | /* Other settings */ |
| 112 | #define MAX_TIMEOUT 500 |
| 113 | |
| 114 | /* SIS5595 constants */ |
| 115 | #define SIS5595_QUICK 0x00 |
| 116 | #define SIS5595_BYTE 0x02 |
| 117 | #define SIS5595_BYTE_DATA 0x04 |
| 118 | #define SIS5595_WORD_DATA 0x06 |
| 119 | #define SIS5595_PROC_CALL 0x08 |
| 120 | #define SIS5595_BLOCK_DATA 0x0A |
| 121 | |
| 122 | /* insmod parameters */ |
| 123 | |
| 124 | /* If force_addr is set to anything different from 0, we forcibly enable |
| 125 | the device at the given address. */ |
Jean Delvare | 6050709 | 2005-09-25 16:23:07 +0200 | [diff] [blame] | 126 | static u16 force_addr; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 127 | module_param(force_addr, ushort, 0); |
| 128 | MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); |
| 129 | |
Jean Delvare | d6072f8 | 2005-09-25 16:37:04 +0200 | [diff] [blame^] | 130 | static struct pci_driver sis5595_driver; |
Jean Delvare | 6050709 | 2005-09-25 16:23:07 +0200 | [diff] [blame] | 131 | static unsigned short sis5595_base; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 132 | |
| 133 | static u8 sis5595_read(u8 reg) |
| 134 | { |
| 135 | outb(reg, sis5595_base + SMB_INDEX); |
| 136 | return inb(sis5595_base + SMB_DAT); |
| 137 | } |
| 138 | |
| 139 | static void sis5595_write(u8 reg, u8 data) |
| 140 | { |
| 141 | outb(reg, sis5595_base + SMB_INDEX); |
| 142 | outb(data, sis5595_base + SMB_DAT); |
| 143 | } |
| 144 | |
| 145 | static int sis5595_setup(struct pci_dev *SIS5595_dev) |
| 146 | { |
| 147 | u16 a; |
| 148 | u8 val; |
| 149 | int *i; |
| 150 | int retval = -ENODEV; |
| 151 | |
| 152 | /* Look for imposters */ |
| 153 | for (i = blacklist; *i != 0; i++) { |
| 154 | struct pci_dev *dev; |
| 155 | dev = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL); |
| 156 | if (dev) { |
| 157 | dev_err(&SIS5595_dev->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i); |
| 158 | pci_dev_put(dev); |
| 159 | return -ENODEV; |
| 160 | } |
| 161 | } |
| 162 | |
| 163 | /* Determine the address of the SMBus areas */ |
| 164 | pci_read_config_word(SIS5595_dev, ACPI_BASE, &sis5595_base); |
| 165 | if (sis5595_base == 0 && force_addr == 0) { |
| 166 | dev_err(&SIS5595_dev->dev, "ACPI base address uninitialized - upgrade BIOS or use force_addr=0xaddr\n"); |
| 167 | return -ENODEV; |
| 168 | } |
| 169 | |
| 170 | if (force_addr) |
| 171 | sis5595_base = force_addr & ~(SIS5595_EXTENT - 1); |
| 172 | dev_dbg(&SIS5595_dev->dev, "ACPI Base address: %04x\n", sis5595_base); |
| 173 | |
| 174 | /* NB: We grab just the two SMBus registers here, but this may still |
| 175 | * interfere with ACPI :-( */ |
Jean Delvare | d6072f8 | 2005-09-25 16:37:04 +0200 | [diff] [blame^] | 176 | if (!request_region(sis5595_base + SMB_INDEX, 2, |
| 177 | sis5595_driver.name)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 178 | dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n", |
| 179 | sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1); |
| 180 | return -ENODEV; |
| 181 | } |
| 182 | |
| 183 | if (force_addr) { |
| 184 | dev_info(&SIS5595_dev->dev, "forcing ISA address 0x%04X\n", sis5595_base); |
| 185 | if (pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base) |
| 186 | != PCIBIOS_SUCCESSFUL) |
| 187 | goto error; |
| 188 | if (pci_read_config_word(SIS5595_dev, ACPI_BASE, &a) |
| 189 | != PCIBIOS_SUCCESSFUL) |
| 190 | goto error; |
| 191 | if ((a & ~(SIS5595_EXTENT - 1)) != sis5595_base) { |
| 192 | /* doesn't work for some chips! */ |
| 193 | dev_err(&SIS5595_dev->dev, "force address failed - not supported?\n"); |
| 194 | goto error; |
| 195 | } |
| 196 | } |
| 197 | |
| 198 | if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val) |
| 199 | != PCIBIOS_SUCCESSFUL) |
| 200 | goto error; |
| 201 | if ((val & 0x80) == 0) { |
| 202 | dev_info(&SIS5595_dev->dev, "enabling ACPI\n"); |
| 203 | if (pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80) |
| 204 | != PCIBIOS_SUCCESSFUL) |
| 205 | goto error; |
| 206 | if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val) |
| 207 | != PCIBIOS_SUCCESSFUL) |
| 208 | goto error; |
| 209 | if ((val & 0x80) == 0) { |
| 210 | /* doesn't work for some chips? */ |
| 211 | dev_err(&SIS5595_dev->dev, "ACPI enable failed - not supported?\n"); |
| 212 | goto error; |
| 213 | } |
| 214 | } |
| 215 | |
| 216 | /* Everything is happy */ |
| 217 | return 0; |
| 218 | |
| 219 | error: |
| 220 | release_region(sis5595_base + SMB_INDEX, 2); |
| 221 | return retval; |
| 222 | } |
| 223 | |
| 224 | static int sis5595_transaction(struct i2c_adapter *adap) |
| 225 | { |
| 226 | int temp; |
| 227 | int result = 0; |
| 228 | int timeout = 0; |
| 229 | |
| 230 | /* Make sure the SMBus host is ready to start transmitting */ |
| 231 | temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8); |
| 232 | if (temp != 0x00) { |
Jean Delvare | 541e6a0 | 2005-06-23 22:18:08 +0200 | [diff] [blame] | 233 | dev_dbg(&adap->dev, "SMBus busy (%04x). Resetting...\n", temp); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 234 | sis5595_write(SMB_STS_LO, temp & 0xff); |
| 235 | sis5595_write(SMB_STS_HI, temp >> 8); |
| 236 | if ((temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8)) != 0x00) { |
| 237 | dev_dbg(&adap->dev, "Failed! (%02x)\n", temp); |
| 238 | return -1; |
| 239 | } else { |
| 240 | dev_dbg(&adap->dev, "Successfull!\n"); |
| 241 | } |
| 242 | } |
| 243 | |
| 244 | /* start the transaction by setting bit 4 */ |
| 245 | sis5595_write(SMB_CTL_LO, sis5595_read(SMB_CTL_LO) | 0x10); |
| 246 | |
| 247 | /* We will always wait for a fraction of a second! */ |
| 248 | do { |
| 249 | msleep(1); |
| 250 | temp = sis5595_read(SMB_STS_LO); |
| 251 | } while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT)); |
| 252 | |
| 253 | /* If the SMBus is still busy, we give up */ |
| 254 | if (timeout >= MAX_TIMEOUT) { |
| 255 | dev_dbg(&adap->dev, "SMBus Timeout!\n"); |
| 256 | result = -1; |
| 257 | } |
| 258 | |
| 259 | if (temp & 0x10) { |
| 260 | dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); |
| 261 | result = -1; |
| 262 | } |
| 263 | |
| 264 | if (temp & 0x20) { |
| 265 | dev_err(&adap->dev, "Bus collision! SMBus may be locked until " |
| 266 | "next hard reset (or not...)\n"); |
| 267 | /* Clock stops and slave is stuck in mid-transmission */ |
| 268 | result = -1; |
| 269 | } |
| 270 | |
| 271 | temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8); |
| 272 | if (temp != 0x00) { |
| 273 | sis5595_write(SMB_STS_LO, temp & 0xff); |
| 274 | sis5595_write(SMB_STS_HI, temp >> 8); |
| 275 | } |
| 276 | |
| 277 | temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8); |
| 278 | if (temp != 0x00) |
| 279 | dev_dbg(&adap->dev, "Failed reset at end of transaction (%02x)\n", temp); |
| 280 | |
| 281 | return result; |
| 282 | } |
| 283 | |
| 284 | /* Return -1 on error. */ |
| 285 | static s32 sis5595_access(struct i2c_adapter *adap, u16 addr, |
| 286 | unsigned short flags, char read_write, |
| 287 | u8 command, int size, union i2c_smbus_data *data) |
| 288 | { |
| 289 | switch (size) { |
| 290 | case I2C_SMBUS_QUICK: |
| 291 | sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); |
| 292 | size = SIS5595_QUICK; |
| 293 | break; |
| 294 | case I2C_SMBUS_BYTE: |
| 295 | sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); |
| 296 | if (read_write == I2C_SMBUS_WRITE) |
| 297 | sis5595_write(SMB_CMD, command); |
| 298 | size = SIS5595_BYTE; |
| 299 | break; |
| 300 | case I2C_SMBUS_BYTE_DATA: |
| 301 | sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); |
| 302 | sis5595_write(SMB_CMD, command); |
| 303 | if (read_write == I2C_SMBUS_WRITE) |
| 304 | sis5595_write(SMB_BYTE, data->byte); |
| 305 | size = SIS5595_BYTE_DATA; |
| 306 | break; |
| 307 | case I2C_SMBUS_PROC_CALL: |
| 308 | case I2C_SMBUS_WORD_DATA: |
| 309 | sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); |
| 310 | sis5595_write(SMB_CMD, command); |
| 311 | if (read_write == I2C_SMBUS_WRITE) { |
| 312 | sis5595_write(SMB_BYTE, data->word & 0xff); |
| 313 | sis5595_write(SMB_BYTE + 1, |
| 314 | (data->word & 0xff00) >> 8); |
| 315 | } |
| 316 | size = (size == I2C_SMBUS_PROC_CALL) ? SIS5595_PROC_CALL : SIS5595_WORD_DATA; |
| 317 | break; |
| 318 | /* |
| 319 | case I2C_SMBUS_BLOCK_DATA: |
| 320 | printk(KERN_WARNING "sis5595.o: Block data not yet implemented!\n"); |
| 321 | return -1; |
| 322 | break; |
| 323 | */ |
| 324 | default: |
| 325 | printk(KERN_WARNING "sis5595.o: Unsupported transaction %d\n", size); |
| 326 | return -1; |
| 327 | } |
| 328 | |
| 329 | sis5595_write(SMB_CTL_LO, ((size & 0x0E))); |
| 330 | |
| 331 | if (sis5595_transaction(adap)) |
| 332 | return -1; |
| 333 | |
| 334 | if ((size != SIS5595_PROC_CALL) && |
| 335 | ((read_write == I2C_SMBUS_WRITE) || (size == SIS5595_QUICK))) |
| 336 | return 0; |
| 337 | |
| 338 | |
| 339 | switch (size) { |
| 340 | case SIS5595_BYTE: /* Where is the result put? I assume here it is in |
| 341 | SMB_DATA but it might just as well be in the |
| 342 | SMB_CMD. No clue in the docs */ |
| 343 | case SIS5595_BYTE_DATA: |
| 344 | data->byte = sis5595_read(SMB_BYTE); |
| 345 | break; |
| 346 | case SIS5595_WORD_DATA: |
| 347 | case SIS5595_PROC_CALL: |
| 348 | data->word = sis5595_read(SMB_BYTE) + (sis5595_read(SMB_BYTE + 1) << 8); |
| 349 | break; |
| 350 | } |
| 351 | return 0; |
| 352 | } |
| 353 | |
| 354 | static u32 sis5595_func(struct i2c_adapter *adapter) |
| 355 | { |
| 356 | return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | |
| 357 | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | |
| 358 | I2C_FUNC_SMBUS_PROC_CALL; |
| 359 | } |
| 360 | |
| 361 | static struct i2c_algorithm smbus_algorithm = { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 362 | .smbus_xfer = sis5595_access, |
| 363 | .functionality = sis5595_func, |
| 364 | }; |
| 365 | |
| 366 | static struct i2c_adapter sis5595_adapter = { |
| 367 | .owner = THIS_MODULE, |
| 368 | .class = I2C_CLASS_HWMON, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 369 | .algo = &smbus_algorithm, |
| 370 | }; |
| 371 | |
| 372 | static struct pci_device_id sis5595_ids[] __devinitdata = { |
| 373 | { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, |
| 374 | { 0, } |
| 375 | }; |
| 376 | |
| 377 | MODULE_DEVICE_TABLE (pci, sis5595_ids); |
| 378 | |
| 379 | static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_id *id) |
| 380 | { |
| 381 | if (sis5595_setup(dev)) { |
| 382 | dev_err(&dev->dev, "SIS5595 not detected, module not inserted.\n"); |
| 383 | return -ENODEV; |
| 384 | } |
| 385 | |
| 386 | /* set up the driverfs linkage to our parent device */ |
| 387 | sis5595_adapter.dev.parent = &dev->dev; |
| 388 | |
| 389 | sprintf(sis5595_adapter.name, "SMBus SIS5595 adapter at %04x", |
| 390 | sis5595_base + SMB_INDEX); |
| 391 | return i2c_add_adapter(&sis5595_adapter); |
| 392 | } |
| 393 | |
| 394 | static void __devexit sis5595_remove(struct pci_dev *dev) |
| 395 | { |
| 396 | i2c_del_adapter(&sis5595_adapter); |
| 397 | release_region(sis5595_base + SMB_INDEX, 2); |
| 398 | } |
| 399 | |
| 400 | static struct pci_driver sis5595_driver = { |
| 401 | .name = "sis5595_smbus", |
| 402 | .id_table = sis5595_ids, |
| 403 | .probe = sis5595_probe, |
| 404 | .remove = __devexit_p(sis5595_remove), |
| 405 | }; |
| 406 | |
| 407 | static int __init i2c_sis5595_init(void) |
| 408 | { |
| 409 | return pci_register_driver(&sis5595_driver); |
| 410 | } |
| 411 | |
| 412 | static void __exit i2c_sis5595_exit(void) |
| 413 | { |
| 414 | pci_unregister_driver(&sis5595_driver); |
| 415 | } |
| 416 | |
| 417 | MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); |
| 418 | MODULE_DESCRIPTION("SIS5595 SMBus driver"); |
| 419 | MODULE_LICENSE("GPL"); |
| 420 | |
| 421 | module_init(i2c_sis5595_init); |
| 422 | module_exit(i2c_sis5595_exit); |