blob: 9a248b505c58572e8012808fba6d5b4bdf494c85 [file] [log] [blame]
Gaurav Minochaca0cd112016-07-19 19:37:44 -07001#!/usr/bin/perl
2
3# Copyright 2016 by Frank Rowand
4# Copyright 2016 by Gaurav Minocha
5#
6# This file is subject to the terms and conditions of the GNU General Public
7# License v2.
8
9use strict 'refs';
10use strict subs;
11
12use Getopt::Long;
13
14$VUFX = "160610a";
15
16$script_name = $0;
17$script_name =~ s|^.*/||;
18
19
20# ----- constants for print_flags()
21
22# Position in string $pr_flags. Range of 0..($num_pr_flags - 1).
23$pr_flag_pos_mcompatible = 0;
24$pr_flag_pos_driver = 1;
25$pr_flag_pos_mdriver = 2;
26$pr_flag_pos_config = 3;
27$pr_flag_pos_mconfig = 4;
28$pr_flag_pos_node_not_enabled = 5;
29$pr_flag_pos_white_list = 6;
30$pr_flag_pos_hard_coded = 7;
31$pr_flag_pos_config_hard_coded = 8;
32$pr_flag_pos_config_none = 9;
33$pr_flag_pos_config_m = 10;
34$pr_flag_pos_config_y = 11;
35$pr_flag_pos_config_test_fail = 12;
36
37$num_pr_flags = $pr_flag_pos_config_test_fail + 1;
38
39# flags in @pr_flag_value must be unique values to allow simple regular
40# expessions to work for --include_flags and --exclude_flags.
41# Convention: use upper case letters for potential issues or problems.
42
43@pr_flag_value = ('M', 'd', 'D', 'c', 'C', 'E', 'W', 'H', 'x', 'n', 'm', 'y', 'F');
44
45@pr_flag_help = (
46 "multiple compatibles found for this node",
47 "driver found for this compatible",
48 "multiple drivers found for this compatible",
49 "kernel config found for this driver",
50 "multiple config options found for this driver",
51 "node is not enabled",
52 "compatible is white listed",
53 "matching driver and/or kernel config is hard coded",
54 "kernel config hard coded in Makefile",
55 "one or more kernel config file options is not set",
56 "one or more kernel config file options is set to 'm'",
57 "one or more kernel config file options is set to 'y'",
58 "one of more kernel config file options fails to have correct value"
59);
60
61
62# -----
63
64%driver_config = (); # driver config array, indexed by driver source file
65%driver_count = (); # driver_cnt, indexed by compatible
66%compat_driver = (); # compatible driver array, indexed by compatible
67%existing_config = (); # existing config symbols present in given config file
68 # expected values are: "y", "m", a decimal number, a
69 # hex number, or a string
70
71# ----- magic compatibles, do not have a driver
72#
73# Will not search for drivers for these compatibles.
74
75%compat_white_list = (
76 'none' => '1',
77 'pci' => '1',
78 'simple-bus' => '1',
79);
80
81# Will not search for drivers for these compatibles.
82#
83# These compatibles have a very large number of false positives.
84#
85# 'hardcoded_no_driver' is a magic value. Other code knows this
86# magic value. Do not use 'no_driver' here!
87#
88# Revisit each 'hardcoded_no_driver' to see how the compatible
89# is used. Are there drivers that can be provided?
90
91%driver_hard_code_list = (
92 'cache' => ['hardcoded_no_driver'],
93 'eeprom' => ['hardcoded_no_driver'],
94 'gpio' => ['hardcoded_no_driver'],
95 'gpio-keys' => ['drivers/input/keyboard/gpio_keys.c'],
96 'i2c-gpio' => ['drivers/i2c/busses/i2c-gpio.c'],
97 'isa' => ['arch/mips/mti-malta/malta-dt.c',
98 'arch/x86/kernel/devicetree.c'],
99 'led' => ['hardcoded_no_driver'],
100 'm25p32' => ['hardcoded_no_driver'],
101 'm25p64' => ['hardcoded_no_driver'],
102 'm25p80' => ['hardcoded_no_driver'],
103 'mtd-ram' => ['drivers/mtd/maps/physmap_of.c'],
104 'pwm-backlight' => ['drivers/video/backlight/pwm_bl.c'],
105 'spidev' => ['hardcoded_no_driver'],
106 'syscon' => ['drivers/mfd/syscon.c'],
107 'tlv320aic23' => ['hardcoded_no_driver'],
108 'wm8731' => ['hardcoded_no_driver'],
109);
110
111# Use these config options instead of searching makefiles
112
113%driver_config_hard_code_list = (
114
115 # this one needed even if %driver_hard_code_list is empty
116 'no_driver' => ['no_config'],
117 'hardcoded_no_driver' => ['no_config'],
118
119 # drivers/usb/host/ehci-ppc-of.c
120 # drivers/usb/host/ehci-xilinx-of.c
121 # are included from:
122 # drivers/usb/host/ehci-hcd.c
123 # thus the search of Makefile for the included .c files is incorrect
124 # ehci-hcd.c wraps the includes with ifdef CONFIG_USB_EHCI_HCD_..._OF
125 #
126 # similar model for ohci-hcd.c (but no ohci-xilinx-of.c)
127 #
128 # similarly, uhci-hcd.c includes uhci-platform.c
129
130 'drivers/usb/host/ehci-ppc-of.c' => ['CONFIG_USB_EHCI_HCD',
131 'CONFIG_USB_EHCI_HCD_PPC_OF'],
132 'drivers/usb/host/ohci-ppc-of.c' => ['CONFIG_USB_OHCI_HCD',
133 'CONFIG_USB_OHCI_HCD_PPC_OF'],
134
135 'drivers/usb/host/ehci-xilinx-of.c' => ['CONFIG_USB_EHCI_HCD',
136 'CONFIG_USB_EHCI_HCD_XILINX'],
137
138 'drivers/usb/host/uhci-platform.c' => ['CONFIG_USB_UHCI_HCD',
139 'CONFIG_USB_UHCI_PLATFORM'],
140
141 # scan_makefile will find only one of these config options:
142 # ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),)
143 'arch/arm/mach-imx/platsmp.c' => ['CONFIG_SOC_IMX6 && CONFIG_SMP',
144 'CONFIG_SOC_LS1021A && CONFIG_SMP'],
145);
146
147
148# 'virt/kvm/arm/.*' are controlled by makefiles in other directories,
149# using relative paths, such as 'KVM := ../../../virt/kvm'. Do not
150# add complexity to find_kconfig() to deal with this. There is a long
151# term intent to change the kvm related makefiles to the normal kernel
152# style. After that is done, this entry can be removed from the
153# black_list_driver.
154
155@black_list_driver = (
156 # kvm no longer a problem after commit 503a62862e8f in 4.7-rc1
157 # 'virt/kvm/arm/.*',
158);
159
160
161sub usage()
162{
163 print
164"
165Usage: $script_name [options] device-tree...
166
167 device_tree is: dts_file | dtb_file | proc_device-tree
168
169
170Valid options:
171 -c FILE Read kernel config options from FILE
172 --config FILE synonym for 'c'
173 --config-format config file friendly output format
174 --exclude-flag FLAG exclude entries with a matching flag
175 -h Display this message and exit
176 --help synonym for 'h'
177 --black-list-driver use driver black list
178 --white-list-config use config white list
179 --white-list-driver use driver white list
180 --include-flag FLAG include only entries with a matching flag
181 --include-suspect include only entries with an uppercase flag
182 --short-name do not show the path portion of the node name
183 --show-lists report of white and black lists
184 --version Display program version and exit
185
186
187 Report driver source files that match the compatibles in the device
188 tree file and the kernel config options that enable the driver source
189 files.
190
191 This program must be run in the root directory of a Linux kernel
192 source tree.
193
194 The default format is a report that is intended to be easily human
195 scannable.
196
197 An alternate format can be selected by --config-format. This will
198 create output that can easily be edited to create a fragment that can
199 be appended to the existing kernel config file. Each entry consists of
200 multiple lines. The first line reports flags, the node path, compatible
201 value, driver file matching the compatible, configuration options, and
202 current values of the configuration options. For each configuration
203 option, the following lines report the current value and the value that
204 is required for the driver file to be included in the kernel.
205
206 If a large number of drivers or config options is listed for a node,
207 and the '$pr_flag_value[$pr_flag_pos_hard_coded]' flag is set consider using --white-list-config and/or
208 --white-list-driver. If the white list option suppresses the correct
209 entry please report that as a bug.
210
211 CAUTION:
212 This program uses heuristics to guess which driver(s) support each
213 compatible string and which config option(s) enables the driver(s).
214 Do not believe that the reported information is fully correct.
215 This program is intended to aid the process of determining the
216 proper kernel configuration for a device tree, but this is not
217 a fully automated process -- human involvement may still be
218 required!
219
220 The driver match heuristic used is to search for source files
221 containing the compatible string enclosed in quotes.
222
223 This program might not be able to find all drivers matching a
224 compatible string.
225
226 Some makefiles are overly clever. This program was not made
227 complex enough to handle them. If no config option is listed
228 for a driver, look at the makefile for the driver source file.
229 Even if a config option is listed for a driver, some other
230 available config options may not be listed.
231
232 FLAG values:
233";
234
235 for ($k = 0; $k < $num_pr_flags; $k++) {
236 printf " %s %s\n", $pr_flag_value[$k], $pr_flag_help[$k];
237 }
238
239 print
240"
241 Upper case letters indicate potential issues or problems.
242
243 The flag:
244
245";
246
247 $k = $pr_flag_pos_hard_coded;
248 printf " %s %s\n", $pr_flag_value[$k], $pr_flag_help[$k];
249
250 print
251"
252 will be set if the config or driver is in the white lists, even if
253 --white-list-config and --white-list-driver are not specified.
254 This is a hint that 1) many of these reported lines are likely to
255 be incorrect, and 2) using those options will reduce the number of
256 drivers and/or config options reported.
257
258 --white-list-config and --white-list-driver may not be accurate if this
259 program is not well maintained. Use them with appropriate skepticism.
260 Use the --show-lists option to report the values in the list.
261
262 Return value:
263 0 if no error
264 1 error processing command line
265 2 unable to open or read kernel config file
266 3 unable to open or process input device tree file(s)
267
268 EXAMPLES:
269
270 dt_to_config arch/arm/boot/dts/my_dts_file.dts
271
272 Basic report.
273
274 dt_to_config \\
275 --config \${KBUILD_OUTPUT}/.config \\
276 arch/\${ARCH}/boot/dts/my_dts_file.dts
277
278 Full report, with config file issues noted.
279
280 dt_to_config --include-suspect \\
281 --config \${KBUILD_OUTPUT}/.config \\
282 arch/\${ARCH}/boot/dts/my_dts_file.dts
283
284 Report of node / compatible string / driver tuples that should
285 be further investigated. A node may have multiple compatible
286 strings. A compatible string may be matched by multiple drivers.
287 A driver may have config file issues noted. The compatible string
288 and/or driver may be in the white lists.
289
290 dt_to_config --include-suspect --config-format \\
291 --config ${KBUILD_OUTPUT}/.config \\
292 arch/\${ARCH}/boot/dts/my_dts_file.dts
293
294 Report of node / compatible string / driver tuples that should
295 be further investigated. The report can be edited to uncomment
296 the config options to select the desired tuple for a given node.
297 A node may have multiple compatible strings. A compatible string
298 may be matched by multiple drivers. A driver may have config file
299 issues noted. The compatible string and/or driver may be in the
300 white lists.
301
302";
303}
304
305sub set_flag()
306{
307 # pr_flags_ref is a reference to $pr_flags
308
309 my $pr_flags_ref = shift;
310 my $pos = shift;
311
312 substr $$pr_flags_ref, $pos, 1, $pr_flag_value[$pos];
313
314 return $pr_flags;
315}
316
317sub print_flags()
318{
319 # return 1 if anything printed, else 0
320
321 # some fields of pn_arg_ref might not be used in this function, but
322 # extract all of them anyway.
323 my $pn_arg_ref = shift;
324
325 my $compat = $pn_arg_ref->{compat};
326 my $compatible_cnt = $pn_arg_ref->{compatible_cnt};
327 my $config = $pn_arg_ref->{config};
328 my $config_cnt = $pn_arg_ref->{config_cnt};
329 my $driver = $pn_arg_ref->{driver};
330 my $driver_cnt = $pn_arg_ref->{driver_cnt};
331 my $full_node = $pn_arg_ref->{full_node};
332 my $node = $pn_arg_ref->{node};
333 my $node_enabled = $pn_arg_ref->{node_enabled};
334 my $white_list = $pn_arg_ref->{white_list};
335
336 my $pr_flags = '-' x $num_pr_flags;
337
338
339 # ----- set flags in $pr_flags
340
341 if ($compatible_cnt > 1) {
342 &set_flag(\$pr_flags, $pr_flag_pos_mcompatible);
343 }
344
345 if ($config_cnt > 1) {
346 &set_flag(\$pr_flags, $pr_flag_pos_mconfig);
347 }
348
349 if ($driver_cnt >= 1) {
350 &set_flag(\$pr_flags, $pr_flag_pos_driver);
351 }
352
353 if ($driver_cnt > 1) {
354 &set_flag(\$pr_flags, $pr_flag_pos_mdriver);
355 }
356
357 # These strings are the same way the linux kernel tests.
358 # The ePapr lists of values is slightly different.
359 if (!(
360 ($node_enabled eq "") ||
361 ($node_enabled eq "ok") ||
362 ($node_enabled eq "okay")
363 )) {
364 &set_flag(\$pr_flags, $pr_flag_pos_node_not_enabled);
365 }
366
367 if ($white_list) {
368 &set_flag(\$pr_flags, $pr_flag_pos_white_list);
369 }
370
371 if (exists($driver_hard_code_list{$compat}) ||
372 (exists($driver_config_hard_code_list{$driver}) &&
373 ($driver ne "no_driver"))) {
374 &set_flag(\$pr_flags, $pr_flag_pos_hard_coded);
375 }
376
377 my @configs = split(' && ', $config);
378 for $configs (@configs) {
379 $not = $configs =~ /^!/;
380 $configs =~ s/^!//;
381
382 if (($configs ne "no_config") && ($configs ne "no_makefile")) {
383 &set_flag(\$pr_flags, $pr_flag_pos_config);
384 }
385
386 if (($config_cnt >= 1) &&
387 ($configs !~ /CONFIG_/) &&
388 (($configs ne "no_config") && ($configs ne "no_makefile"))) {
389 &set_flag(\$pr_flags, $pr_flag_pos_config_hard_coded);
390 }
391
392 my $existing_config = $existing_config{$configs};
393 if ($existing_config eq "m") {
394 &set_flag(\$pr_flags, $pr_flag_pos_config_m);
395 # Possible fail, depends on whether built in or
396 # module is desired.
397 &set_flag(\$pr_flags, $pr_flag_pos_config_test_fail);
398 } elsif ($existing_config eq "y") {
399 &set_flag(\$pr_flags, $pr_flag_pos_config_y);
400 if ($not) {
401 &set_flag(\$pr_flags, $pr_flag_pos_config_test_fail);
402 }
403 } elsif (($config_file) && ($configs =~ /CONFIG_/)) {
404 &set_flag(\$pr_flags, $pr_flag_pos_config_none);
405 if (!$not) {
406 &set_flag(\$pr_flags, $pr_flag_pos_config_test_fail);
407 }
408 }
409 }
410
411 # ----- include / exclude filters
412
413 if ($include_flag_pattern && ($pr_flags !~ m/$include_flag_pattern/)) {
414 return 0;
415 }
416
417 if ($exclude_flag_pattern && ($pr_flags =~ m/$exclude_flag_pattern/)) {
418 return 0;
419 }
420
421 if ($config_format) {
422 print "# ";
423 }
424 print "$pr_flags : ";
425
426 return 1;
427}
428
429
430sub print_node()
431{
432 # return number of lines printed
433
434 # some fields of pn_arg_ref might not be used in this function, but
435 # extract all of them anyway.
436 my $pn_arg_ref = shift;
437
438 my $compat = $pn_arg_ref->{compat};
439 my $compatible_cnt = $pn_arg_ref->{compatible_cnt};
440 my $config = $pn_arg_ref->{config};
441 my $config_cnt = $pn_arg_ref->{config_cnt};
442 my $driver = $pn_arg_ref->{driver};
443 my $driver_cnt = $pn_arg_ref->{driver_cnt};
444 my $full_node = $pn_arg_ref->{full_node};
445 my $node = $pn_arg_ref->{node};
446 my $node_enabled = $pn_arg_ref->{node_enabled};
447 my $white_list = $pn_arg_ref->{white_list};
448
449 my $separator;
450
451 if (! &print_flags($pn_arg_ref)) {
452 return 0;
453 }
454
455
456 if ($short_name) {
457 print "$node";
458 } else {
459 print "$full_node";
460 }
461 print " : $compat : $driver : $config : ";
462
463 my @configs = split(' && ', $config);
464
465 if ($config_file) {
466 for $configs (@configs) {
467 $configs =~ s/^!//;
468 my $existing_config = $existing_config{$configs};
469 if (!$existing_config) {
470 # check for /-m/, /-y/, or /-objs/
471 if ($configs !~ /CONFIG_/) {
472 $existing_config = "x";
473 };
474 };
475 if ($existing_config) {
476 print "$separator", "$existing_config";
477 $separator = ", ";
478 } else {
479 print "$separator", "n";
480 $separator = ", ";
481 }
482 }
483 } else {
484 print "none";
485 }
486
487 print "\n";
488
489 if ($config_format) {
490 for $configs (@configs) {
491 $not = $configs =~ /^!/;
492 $configs =~ s/^!//;
493 my $existing_config = $existing_config{$configs};
494
495 if ($not) {
496 if ($configs !~ /CONFIG_/) {
497 print "# $configs\n";
498 } elsif ($existing_config eq "m") {
499 print "# $configs is m\n";
500 print "# $configs=n\n";
501 } elsif ($existing_config eq "y") {
502 print "# $configs is set\n";
503 print "# $configs=n\n";
504 } else {
505 print "# $configs is not set\n";
506 print "# $configs=n\n";
507 }
508
509 } else {
510 if ($configs !~ /CONFIG_/) {
511 print "# $configs\n";
512 } elsif ($existing_config eq "m") {
513 print "# $configs is m\n";
514 print "# $configs=y\n";
515 } elsif ($existing_config eq "y") {
516 print "# $configs is set\n";
517 print "# $configs=y\n";
518 } else {
519 print "# $configs is not set\n";
520 print "# $configs=y\n";
521 }
522 }
523 }
524 }
525
526 return 1;
527}
528
529
530sub scan_makefile
531{
532 my $pn_arg_ref = shift;
533 my $driver = shift;
534
535 # ----- Find Kconfig symbols that enable driver
536
537 my ($dir, $base) = $driver =~ m{(.*)/(.*).c};
538
539 my $makefile = $dir . "/Makefile";
540 if (! -r $makefile) {
541 $makefile = $dir . "/Kbuild";
542 }
543 if (! -r $makefile) {
544 my $config;
545
546 $config = 'no_makefile';
547 push @{ $driver_config{$driver} }, $config;
548 return;
549 }
550
551 if (!open(MAKEFILE_FILE, "<", "$makefile")) {
552 return;
553 }
554
555 my $line;
556 my @config;
557 my @if_config;
558 my @make_var;
559
560 NEXT_LINE:
561 while ($next_line = <MAKEFILE_FILE>) {
562 my $config;
563 my $if_config;
564 my $ifdef;
565 my $ifeq;
566 my $ifndef;
567 my $ifneq;
568 my $ifdef_config;
569 my $ifeq_config;
570 my $ifndef_config;
571 my $ifneq_config;
572
573 chomp($next_line);
574 $line = $line . $next_line;
575 if ($next_line =~ /\\$/) {
576 $line =~ s/\\$/ /;
577 next NEXT_LINE;
578 }
579 if ($line =~ /^\s*#/) {
580 $line = "";
581 next NEXT_LINE;
582 }
583
584 # ----- condition ... else ... endif
585
586 if ($line =~ /^([ ]\s*|)else\b/) {
587 $if_config = "!" . pop @if_config;
588 $if_config =~ s/^!!//;
589 push @if_config, $if_config;
590 $line =~ s/^([ ]\s*|)else\b//;
591 }
592
593 ($null, $ifeq_config, $ifeq_config_val ) = $line =~ /^([ ]\s*|)ifeq\b.*\b(CONFIG_[A-Za-z0-9_]*)(.*)/;
594 ($null, $ifneq_config, $ifneq_config_val) = $line =~ /^([ ]\s*|)ifneq\b.*\b(CONFIG_[A-Za-z0-9_]*)(.*)/;
595 ($null, $ifdef_config) = $line =~ /^([ ]\s*|)ifdef\b.*\b(CONFIG_[A-Za-z0-9_]*)/;
596 ($null, $ifndef_config) = $line =~ /^([ ]\s*|)ifndef\b.*\b(CONFIG_[A-Za-z0-9_]*)/;
597
598 ($null, $ifeq) = $line =~ /^([ ]\s*|)ifeq\b\s*(.*)/;
599 ($null, $ifneq) = $line =~ /^([ ]\s*|)ifneq\b\s*(.*)/;
600 ($null, $ifdef) = $line =~ /^([ ]\s*|)ifdef\b\s*(.*)/;
601 ($null, $ifndef) = $line =~ /^([ ]\s*|)ifndef\b\s*(.*)/;
602
603 # Order of tests is important. Prefer "CONFIG_*" regex match over
604 # less specific regex match.
605 if ($ifdef_config) {
606 $if_config = $ifdef_config;
607 } elsif ($ifeq_config) {
608 if ($ifeq_config_val =~ /y/) {
609 $if_config = $ifeq_config;
610 } else {
611 $if_config = "!" . $ifeq_config;
612 }
613 } elsif ($ifndef_config) {
614 $if_config = "!" . $ifndef_config;
615 } elsif ($ifneq_config) {
616 if ($ifneq_config_val =~ /y/) {
617 $if_config = "!" . $ifneq_config;
618 } else {
619 $if_config = $ifneq_config;
620 }
621 } elsif ($ifdef) {
622 $if_config = $ifdef;
623 } elsif ($ifeq) {
624 $if_config = $ifeq;
625 } elsif ($ifndef) {
626 $if_config = "!" . $ifndef;
627 } elsif ($ifneq) {
628 $if_config = "!" . $ifneq;
629 } else {
630 $if_config = "";
631 }
632 $if_config =~ s/^!!//;
633
634 if ($if_config) {
635 push @if_config, $if_config;
636 $line = "";
637 next NEXT_LINE;
638 }
639
640 if ($line =~ /^([ ]\s*|)endif\b/) {
641 pop @if_config;
642 $line = "";
643 next NEXT_LINE;
644 }
645
646 # ----- simple CONFIG_* = *.[co] or xxx [+:?]*= *.[co]
647 # Most makefiles select on *.o, but
648 # arch/powerpc/boot/Makefile selects on *.c
649
650 ($config) = $line =~ /(CONFIG_[A-Za-z0-9_]+).*\b$base.[co]\b/;
651
652 # ----- match a make variable instead of *.[co]
653 # Recursively expanded variables are not handled.
654
655 if (!$config) {
656 my $make_var;
657 ($make_var) = $line =~ /\s*(\S+?)\s*[+:\?]*=.*\b$base.[co]\b/;
658 if ($make_var) {
659 if ($make_var =~ /[a-zA-Z0-9]+-[ym]/) {
660 $config = $make_var;
661 } elsif ($make_var =~ /[a-zA-Z0-9]+-objs/) {
662 $config = $make_var;
663 } else {
664 push @make_var, $make_var;
665 }
666 }
667 }
668
669 if (!$config) {
670 for $make_var (@make_var) {
671 ($config) = $line =~ /(CONFIG_[A-Za-z0-9_]+).*\b$make_var\b/;
672 last if ($config);
673 }
674 }
675
676 if (!$config) {
677 for $make_var (@make_var) {
678 ($config) = $line =~ /\s*(\S+?)\s*[+:\?]*=.*\b$make_var\b/;
679 last if ($config);
680 }
681 }
682
683 # ----- next if no config found
684
685 if (!$config) {
686 $line = "";
687 next NEXT_LINE;
688 }
689
690 for $if_config (@if_config) {
691 $config = $if_config . " && " . $config;
692 }
693
694 push @{ $driver_config{$driver} }, $config;
695
696 $line = "";
697 }
698
699 close(MAKEFILE_FILE);
700
701}
702
703
704sub find_kconfig
705{
706 my $pn_arg_ref = shift;
707 my $driver = shift;
708
709 my $lines_printed = 0;
710 my @configs;
711
712 if (!@{ $driver_config{$driver} }) {
713 &scan_makefile($pn_arg_ref, $driver);
714 if (!@{ $driver_config{$driver} }) {
715 push @{ $driver_config{$driver} }, "no_config";
716 }
717 }
718
719 @configs = @{ $driver_config{$driver} };
720
721 $$pn_arg_ref{config_cnt} = $#configs + 1;
722 for my $config (@configs) {
723 $$pn_arg_ref{config} = $config;
724 $lines_printed += &print_node($pn_arg_ref);
725 }
726
727 return $lines_printed;
728}
729
730
731sub handle_compatible()
732{
733 my $full_node = shift;
734 my $node = shift;
735 my $compatible = shift;
736 my $node_enabled = shift;
737
738 my $compat;
739 my $lines_printed = 0;
740 my %pn_arg = ();
741
742 return if (!$node or !$compatible);
743
744 # Do not process compatible property of root node,
745 # it is used to match board, not to bind a driver.
746 return if ($node eq "/");
747
748 $pn_arg{full_node} = $full_node;
749 $pn_arg{node} = $node;
750 $pn_arg{node_enabled} = $node_enabled;
751
752 my @compatibles = split('", "', $compatible);
753
754 $compatibles[0] =~ s/^"//;
755 $compatibles[$#compatibles] =~ s/"$//;
756
757 $pn_arg{compatible_cnt} = $#compatibles + 1;
758
759 COMPAT:
760 for $compat (@compatibles) {
761
762 $pn_arg{compat} = $compat;
763 $pn_arg{driver_cnt} = 0;
764 $pn_arg{white_list} = 0;
765
766 if (exists($compat_white_list{$compat})) {
767 $pn_arg{white_list} = 1;
768 $pn_arg{driver} = "no_driver";
769 $pn_arg{config_cnt} = 1;
770 $pn_arg{config} = "no_config";
771 $lines_printed += &print_node(\%pn_arg);
772 next COMPAT;
773 }
774
775 # ----- if compat previously seen, use cached info
776
777 if (exists($compat_driver{$compat})) {
778 for my $driver (@{ $compat_driver{$compat} }) {
779 $pn_arg{driver} = $driver;
780 $pn_arg{driver_cnt} = $driver_count{$compat};
781 $pn_arg{config_cnt} = $#{ $driver_config{$driver}} + 1;
782
783 for my $config (@{ $driver_config{$driver} }) {
784 $pn_arg{config} = $config;
785 $lines_printed += &print_node(\%pn_arg);
786 }
787
788 if (!@{ $driver_config{$driver} }) {
789 # no config cached yet
790 # $driver in %driver_hard_code_list
791 # but not %driver_config_hard_code_list
792 $lines_printed += &find_kconfig(\%pn_arg, $driver);
793 }
794 }
795 next COMPAT;
796 }
797
798
799 # ----- Find drivers (source files that contain compatible)
800
801 # this will miss arch/sparc/include/asm/parport.h
802 # It is better to move the compatible out of the .h
803 # than to add *.h. to the files list, because *.h generates
804 # a lot of false negatives.
805 my $files = '"*.c"';
806 my $drivers = `git grep -l '"$compat"' -- $files`;
807 chomp($drivers);
808 if ($drivers eq "") {
809 $pn_arg{driver} = "no_driver";
810 $pn_arg{config_cnt} = 1;
811 $pn_arg{config} = "no_config";
812 push @{ $compat_driver{$compat} }, "no_driver";
813 $lines_printed += &print_node(\%pn_arg);
814 next COMPAT;
815 }
816
817 my @drivers = split("\n", $drivers);
818 $driver_count{$compat} = $#drivers + 1;
819 $pn_arg{driver_cnt} = $#drivers + 1;
820
821 DRIVER:
822 for my $driver (@drivers) {
823 push @{ $compat_driver{$compat} }, $driver;
824 $pn_arg{driver} = $driver;
825
826 # ----- if driver previously seen, use cached info
827
828 $pn_arg{config_cnt} = $#{ $driver_config{$driver} } + 1;
829 for my $config (@{ $driver_config{$driver} }) {
830 $pn_arg{config} = $config;
831 $lines_printed += &print_node(\%pn_arg);
832 }
833 if (@{ $driver_config{$driver} }) {
834 next DRIVER;
835 }
836
837 if ($black_list_driver) {
838 for $black (@black_list_driver) {
839 next DRIVER if ($driver =~ /^$black$/);
840 }
841 }
842
843
844 # ----- Find Kconfig symbols that enable driver
845
846 $lines_printed += &find_kconfig(\%pn_arg, $driver);
847
848 }
849 }
850
851 # White space (line) between nodes for readability.
852 # Each node may report several compatibles.
853 # For each compatible, multiple drivers may be reported.
854 # For each driver, multiple CONFIG_ options may be reported.
855 if ($lines_printed) {
856 print "\n";
857 }
858}
859
860sub read_dts()
861{
862 my $file = shift;
863
864 my $compatible = "";
865 my $line;
866 my $node = "";
867 my $node_enabled = "";
868
869 if (! -r $file) {
870 print STDERR "file '$file' is not readable or does not exist\n";
871 exit 3;
872 }
873
874 if (!open(DT_FILE, "-|", "$dtx_diff $file")) {
875 print STDERR "\n";
876 print STDERR "shell command failed:\n";
877 print STDERR " $dtx_diff $file\n";
878 print STDERR "\n";
879 exit 3;
880 }
881
882 FILE:
883 while ($line = <DT_FILE>) {
884 chomp($line);
885
886 if ($line =~ /{/) {
887
888 &handle_compatible($full_node, $node, $compatible,
889 $node_enabled);
890
891 while ($end_node_count-- > 0) {
892 pop @full_node;
893 };
894 $end_node_count = 0;
895 $full_node = @full_node[-1];
896
897 $node = $line;
898 $node =~ s/^\s*(.*)\s+\{.*/$1/;
899 $node =~ s/.*: //;
900 if ($node eq '/' ) {
901 $full_node = '/';
902 } elsif ($full_node ne '/') {
903 $full_node = $full_node . '/' . $node;
904 } else {
905 $full_node = '/' . $node;
906 }
907 push @full_node, $full_node;
908
909 $compatible = "";
910 $node_enabled = "";
911 next FILE;
912 }
913
914 if ($line =~ /}/) {
915 $end_node_count++;
916 }
917
918 if ($line =~ /(\s+|^)status =/) {
919 $node_enabled = $line;
920 $node_enabled =~ s/^\t*//;
921 $node_enabled =~ s/^status = "//;
922 $node_enabled =~ s/";$//;
923 next FILE;
924 }
925
926 if ($line =~ /(\s+|^)compatible =/) {
927 # Extract all compatible entries for this device
928 # White space matching here and in handle_compatible() is
929 # precise, because input format is the output of dtc,
930 # which is invoked by dtx_diff.
931 $compatible = $line;
932 $compatible =~ s/^\t*//;
933 $compatible =~ s/^compatible = //;
934 $compatible =~ s/;$//;
935 }
936 }
937
938 &handle_compatible($full_node, $node, $compatible, $node_enabled);
939
940 close(DT_FILE);
941}
942
943
944sub read_config_file()
945{
946 if (! -r $config_file) {
947 print STDERR "file '$config_file' is not readable or does not exist\n";
948 exit 2;
949 }
950
951 if (!open(CONFIG_FILE, "<", "$config_file")) {
952 print STDERR "open $config_file failed\n";
953 exit 2;
954 }
955
956 my @line;
957
958 LINE:
959 while ($line = <CONFIG_FILE>) {
960 chomp($line);
961 next LINE if ($line =~ /^\s*#/);
962 next LINE if ($line =~ /^\s*$/);
963 @line = split /=/, $line;
964 $existing_config{@line[0]} = @line[1];
965 }
966
967 close(CONFIG_FILE);
968}
969
970
971sub cmd_line_err()
972{
973 my $msg = shift;
974
975 print STDERR "\n";
976 print STDERR " ERROR processing command line options\n";
977 print STDERR " $msg\n" if ($msg ne "");
978 print STDERR "\n";
979 print STDERR " For help, type '$script_name --help'\n";
980 print STDERR "\n";
981}
982
983
984# -----------------------------------------------------------------------------
985# program entry point
986
987Getopt::Long::Configure("no_ignore_case", "bundling");
988
989if (!GetOptions(
990 "c=s" => \$config_file,
991 "config=s" => \$config_file,
992 "config-format" => \$config_format,
993 "exclude-flag=s" => \@exclude_flag,
994 "h" => \$help,
995 "help" => \$help,
996 "black-list-driver" => \$black_list_driver,
997 "white-list-config" => \$white_list_config,
998 "white-list-driver" => \$white_list_driver,
999 "include-flag=s" => \@include_flag,
1000 "include-suspect" => \$include_suspect,
1001 "short-name" => \$short_name,
1002 "show-lists" => \$show_lists,
1003 "version" => \$version,
1004 )) {
1005
1006 &cmd_line_err();
1007
1008 exit 1;
1009}
1010
1011
1012my $exit_after_messages = 0;
1013
1014if ($version) {
1015 print STDERR "\n$script_name $VUFX\n\n";
1016 $exit_after_messages = 1;
1017}
1018
1019
1020if ($help) {
1021 &usage;
1022 $exit_after_messages = 1;
1023}
1024
1025
1026if ($show_lists) {
1027
1028 print "\n";
1029 print "These compatibles are hard coded to have no driver.\n";
1030 print "\n";
1031 for my $compat (sort keys %compat_white_list) {
1032 print " $compat\n";
1033 }
1034
1035
1036 print "\n\n";
1037 print "The driver for these compatibles is hard coded (white list).\n";
1038 print "\n";
1039 my $max_compat_len = 0;
1040 for my $compat (sort keys %driver_hard_code_list) {
1041 if (length $compat > $max_compat_len) {
1042 $max_compat_len = length $compat;
1043 }
1044 }
1045 for my $compat (sort keys %driver_hard_code_list) {
1046 if (($driver ne "hardcoded_no_driver") && ($driver ne "no_driver")) {
1047 my $first = 1;
1048 for my $driver (@{ $driver_hard_code_list{$compat} }) {
1049 if ($first) {
1050 print " $compat";
1051 print " " x ($max_compat_len - length $compat);
1052 $first = 0;
1053 } else {
1054 print " ", " " x $max_compat_len;
1055 }
1056 print " $driver\n";
1057 }
1058 }
1059 }
1060
1061
1062 print "\n\n";
1063 print "The configuration option for these drivers is hard coded (white list).\n";
1064 print "\n";
1065 my $max_driver_len = 0;
1066 for my $driver (sort keys %driver_config_hard_code_list) {
1067 if (length $driver > $max_driver_len) {
1068 $max_driver_len = length $driver;
1069 }
1070 }
1071 for my $driver (sort keys %driver_config_hard_code_list) {
1072 if (($driver ne "hardcoded_no_driver") && ($driver ne "no_driver")) {
1073 my $first = 1;
1074 for my $config (@{ $driver_config_hard_code_list{$driver} }) {
1075 if ($first) {
1076 print " $driver";
1077 print " " x ($max_driver_len - length $driver);
1078 $first = 0;
1079 } else {
1080 print " ", " " x $max_driver_len;
1081 }
1082 print " $config\n";
1083 }
1084 }
1085 }
1086
1087
1088 print "\n\n";
1089 print "These drivers are black listed.\n";
1090 print "\n";
1091 for my $driver (@black_list_driver) {
1092 print " $driver\n";
1093 }
1094
1095 print "\n";
1096
1097 $exit_after_messages = 1;
1098}
1099
1100
1101if ($exit_after_messages) {
1102 exit 0;
1103}
1104
1105
1106$exclude_flag_pattern = "[";
1107for my $exclude_flag (@exclude_flag) {
1108 $exclude_flag_pattern = $exclude_flag_pattern . $exclude_flag;
1109}
1110$exclude_flag_pattern = $exclude_flag_pattern . "]";
1111# clean up if empty
1112$exclude_flag_pattern =~ s/^\[\]$//;
1113
1114
1115$include_flag_pattern = "[";
1116for my $include_flag (@include_flag) {
1117 $include_flag_pattern = $include_flag_pattern . $include_flag;
1118}
1119$include_flag_pattern = $include_flag_pattern . "]";
1120# clean up if empty
1121$include_flag_pattern =~ s/^\[\]$//;
1122
1123
1124if ($exclude_flag_pattern) {
1125 my $found = 0;
1126 for $pr_flag_value (@pr_flag_value) {
1127 if ($exclude_flag_pattern =~ m/$pr_flag_value/) {
1128 $found = 1;
1129 }
1130 }
1131 if (!$found) {
1132 &cmd_line_err("invalid value for FLAG in --exclude-flag\n");
1133 exit 1
1134 }
1135}
1136
1137if ($include_flag_pattern) {
1138 my $found = 0;
1139 for $pr_flag_value (@pr_flag_value) {
1140 if ($include_flag_pattern =~ m/$pr_flag_value/) {
1141 $found = 1;
1142 }
1143 }
1144 if (!$found) {
1145 &cmd_line_err("invalid value for FLAG in --include-flag\n");
1146 exit 1
1147 }
1148}
1149
1150if ($include_suspect) {
1151 $include_flag_pattern =~ s/\[//;
1152 $include_flag_pattern =~ s/\]//;
1153 $include_flag_pattern = "[" . $include_flag_pattern . "A-Z]";
1154}
1155
1156if ($exclude_flag_pattern =~ m/$include_flag_pattern/) {
1157 &cmd_line_err("the same flag appears in both --exclude-flag and --include-flag or --include-suspect\n");
1158 exit 1
1159}
1160
1161
1162# ($#ARGV < 0) is valid for --help, --version
1163if ($#ARGV < 0) {
1164 &cmd_line_err("device-tree... is required");
1165 exit 1
1166}
1167
1168
1169if ($config_file) {
1170 &read_config_file();
1171}
1172
1173
1174# avoid pushing duplicates for this value
1175$driver = "hardcoded_no_driver";
1176for $config ( @{ $driver_config_hard_code_list{$driver} } ) {
1177 push @{ $driver_config{$driver} }, $config;
1178}
1179
1180if ($white_list_driver) {
1181 for my $compat (keys %driver_hard_code_list) {
1182 for my $driver (@{ $driver_hard_code_list{$compat} }) {
1183 push @{ $compat_driver{$compat} }, $driver;
1184 if ($driver ne "hardcoded_no_driver") {
1185 $driver_count{$compat} = scalar @{ $compat_driver{$compat} };
1186 }
1187 }
1188 }
1189}
1190
1191if ($white_list_config) {
1192 for my $driver (keys %driver_config_hard_code_list) {
1193 if ($driver ne "hardcoded_no_driver") {
1194 for $config ( @{ $driver_config_hard_code_list{$driver} } ) {
1195 push @{ $driver_config{$driver} }, $config;
1196 }
1197 }
1198 }
1199}
1200
1201if (-x "scripts/dtc/dtx_diff") {
1202 $dtx_diff = "scripts/dtc/dtx_diff";
1203} else {
1204
1205 print STDERR "\n";
1206 print STDERR "$script_name must be run from the root directory of a Linux kernel tree\n";
1207 print STDERR "\n";
1208 exit 3;
1209}
1210
1211for $file (@ARGV) {
1212 &read_dts($file);
1213}