blob: 7acbebb17fa6c42bd07f1da11311dde70b4bc60b [file] [log] [blame]
Tejun Heo70c83e12005-09-11 09:37:19 +09001
2SCSI EH
3======================================
4
5 This document describes SCSI midlayer error handling infrastructure.
6Please refer to Documentation/scsi/scsi_mid_low_api.txt for more
7information regarding SCSI midlayer.
8
9TABLE OF CONTENTS
10
11[1] How SCSI commands travel through the midlayer and to EH
12 [1-1] struct scsi_cmnd
13 [1-2] How do scmd's get completed?
14 [1-2-1] Completing a scmd w/ scsi_done
15 [1-2-2] Completing a scmd w/ timeout
16 [1-3] How EH takes over
17[2] How SCSI EH works
18 [2-1] EH through fine-grained callbacks
19 [2-1-1] Overview
20 [2-1-2] Flow of scmds through EH
21 [2-1-3] Flow of control
Christoph Hellwig9227c332006-04-01 19:21:04 +020022 [2-2] EH through transportt->eh_strategy_handler()
23 [2-2-1] Pre transportt->eh_strategy_handler() SCSI midlayer conditions
24 [2-2-2] Post transportt->eh_strategy_handler() SCSI midlayer conditions
Tejun Heo70c83e12005-09-11 09:37:19 +090025 [2-2-3] Things to consider
26
27
28[1] How SCSI commands travel through the midlayer and to EH
29
30[1-1] struct scsi_cmnd
31
32 Each SCSI command is represented with struct scsi_cmnd (== scmd). A
33scmd has two list_head's to link itself into lists. The two are
34scmd->list and scmd->eh_entry. The former is used for free list or
35per-device allocated scmd list and not of much interest to this EH
36discussion. The latter is used for completion and EH lists and unless
37otherwise stated scmds are always linked using scmd->eh_entry in this
38discussion.
39
40
41[1-2] How do scmd's get completed?
42
43 Once LLDD gets hold of a scmd, either the LLDD will complete the
44command by calling scsi_done callback passed from midlayer when
45invoking hostt->queuecommand() or SCSI midlayer will time it out.
46
47
48[1-2-1] Completing a scmd w/ scsi_done
49
50 For all non-EH commands, scsi_done() is the completion callback. It
51does the following.
52
53 1. Delete timeout timer. If it fails, it means that timeout timer
54 has expired and is going to finish the command. Just return.
55
56 2. Link scmd to per-cpu scsi_done_q using scmd->en_entry
57
58 3. Raise SCSI_SOFTIRQ
59
60 SCSI_SOFTIRQ handler scsi_softirq calls scsi_decide_disposition() to
61determine what to do with the command. scsi_decide_disposition()
62looks at the scmd->result value and sense data to determine what to do
63with the command.
64
65 - SUCCESS
66 scsi_finish_command() is invoked for the command. The
67 function does some maintenance choirs and notify completion by
68 calling scmd->done() callback, which, for fs requests, would
69 be HLD completion callback - sd:sd_rw_intr, sr:rw_intr,
70 st:st_intr.
71
72 - NEEDS_RETRY
73 - ADD_TO_MLQUEUE
74 scmd is requeued to blk queue.
75
76 - otherwise
77 scsi_eh_scmd_add(scmd, 0) is invoked for the command. See
Matt LaPlante5d3f0832006-11-30 05:21:10 +010078 [1-3] for details of this function.
Tejun Heo70c83e12005-09-11 09:37:19 +090079
80
81[1-2-2] Completing a scmd w/ timeout
82
83 The timeout handler is scsi_times_out(). When a timeout occurs, this
84function
85
Stefan Richter8c0ae6562005-11-05 01:35:05 +010086 1. invokes optional hostt->eh_timed_out() callback. Return value can
Tejun Heo70c83e12005-09-11 09:37:19 +090087 be one of
88
89 - EH_HANDLED
Stefan Richter8c0ae6562005-11-05 01:35:05 +010090 This indicates that eh_timed_out() dealt with the timeout. The
Tejun Heo70c83e12005-09-11 09:37:19 +090091 scmd is passed to __scsi_done() and thus linked into per-cpu
92 scsi_done_q. Normal command completion described in [1-2-1]
93 follows.
94
95 - EH_RESET_TIMER
96 This indicates that more time is required to finish the
97 command. Timer is restarted. This action is counted as a
98 retry and only allowed scmd->allowed + 1(!) times. Once the
99 limit is reached, action for EH_NOT_HANDLED is taken instead.
100
101 *NOTE* This action is racy as the LLDD could finish the scmd
102 after the timeout has expired but before it's added back. In
103 such cases, scsi_done() would think that timeout has occurred
104 and return without doing anything. We lose completion and the
105 command will time out again.
106
107 - EH_NOT_HANDLED
Stefan Richter8c0ae6562005-11-05 01:35:05 +0100108 This is the same as when eh_timed_out() callback doesn't exist.
Tejun Heo70c83e12005-09-11 09:37:19 +0900109 Step #2 is taken.
110
111 2. scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD) is invoked for the
112 command. See [1-3] for more information.
113
114
115[1-3] How EH takes over
116
117 scmds enter EH via scsi_eh_scmd_add(), which does the following.
118
119 1. Turns on scmd->eh_eflags as requested. It's 0 for error
120 completions and SCSI_EH_CANCEL_CMD for timeouts.
121
122 2. Links scmd->eh_entry to shost->eh_cmd_q
123
124 3. Sets SHOST_RECOVERY bit in shost->shost_state
125
126 4. Increments shost->host_failed
127
128 5. Wakes up SCSI EH thread if shost->host_busy == shost->host_failed
129
130 As can be seen above, once any scmd is added to shost->eh_cmd_q,
131SHOST_RECOVERY shost_state bit is turned on. This prevents any new
132scmd to be issued from blk queue to the host; eventually, all scmds on
133the host either complete normally, fail and get added to eh_cmd_q, or
134time out and get added to shost->eh_cmd_q.
135
136 If all scmds either complete or fail, the number of in-flight scmds
137becomes equal to the number of failed scmds - i.e. shost->host_busy ==
138shost->host_failed. This wakes up SCSI EH thread. So, once woken up,
139SCSI EH thread can expect that all in-flight commands have failed and
140are linked on shost->eh_cmd_q.
141
142 Note that this does not mean lower layers are quiescent. If a LLDD
143completed a scmd with error status, the LLDD and lower layers are
144assumed to forget about the scmd at that point. However, if a scmd
Stefan Richter8c0ae6562005-11-05 01:35:05 +0100145has timed out, unless hostt->eh_timed_out() made lower layers forget
Tejun Heo70c83e12005-09-11 09:37:19 +0900146about the scmd, which currently no LLDD does, the command is still
147active as long as lower layers are concerned and completion could
148occur at any time. Of course, all such completions are ignored as the
149timer has already expired.
150
151 We'll talk about how SCSI EH takes actions to abort - make LLDD
152forget about - timed out scmds later.
153
154
155[2] How SCSI EH works
156
157 LLDD's can implement SCSI EH actions in one of the following two
158ways.
159
160 - Fine-grained EH callbacks
161 LLDD can implement fine-grained EH callbacks and let SCSI
162 midlayer drive error handling and call appropriate callbacks.
Matt LaPlantefff92892006-10-03 22:47:42 +0200163 This will be discussed further in [2-1].
Tejun Heo70c83e12005-09-11 09:37:19 +0900164
165 - eh_strategy_handler() callback
166 This is one big callback which should perform whole error
167 handling. As such, it should do all choirs SCSI midlayer
168 performs during recovery. This will be discussed in [2-2].
169
170 Once recovery is complete, SCSI EH resumes normal operation by
171calling scsi_restart_operations(), which
172
173 1. Checks if door locking is needed and locks door.
174
175 2. Clears SHOST_RECOVERY shost_state bit
176
177 3. Wakes up waiters on shost->host_wait. This occurs if someone
178 calls scsi_block_when_processing_errors() on the host.
179 (*QUESTION* why is it needed? All operations will be blocked
180 anyway after it reaches blk queue.)
181
182 4. Kicks queues in all devices on the host in the asses
183
184
185[2-1] EH through fine-grained callbacks
186
187[2-1-1] Overview
188
189 If eh_strategy_handler() is not present, SCSI midlayer takes charge
190of driving error handling. EH's goals are two - make LLDD, host and
191device forget about timed out scmds and make them ready for new
192commands. A scmd is said to be recovered if the scmd is forgotten by
193lower layers and lower layers are ready to process or fail the scmd
194again.
195
196 To achieve these goals, EH performs recovery actions with increasing
Matt LaPlante2fe0ae72006-10-03 22:50:39 +0200197severity. Some actions are performed by issuing SCSI commands and
Tejun Heo70c83e12005-09-11 09:37:19 +0900198others are performed by invoking one of the following fine-grained
199hostt EH callbacks. Callbacks may be omitted and omitted ones are
200considered to fail always.
201
202int (* eh_abort_handler)(struct scsi_cmnd *);
203int (* eh_device_reset_handler)(struct scsi_cmnd *);
204int (* eh_bus_reset_handler)(struct scsi_cmnd *);
205int (* eh_host_reset_handler)(struct scsi_cmnd *);
206
207 Higher-severity actions are taken only when lower-severity actions
208cannot recover some of failed scmds. Also, note that failure of the
209highest-severity action means EH failure and results in offlining of
210all unrecovered devices.
211
212 During recovery, the following rules are followed
213
214 - Recovery actions are performed on failed scmds on the to do list,
215 eh_work_q. If a recovery action succeeds for a scmd, recovered
216 scmds are removed from eh_work_q.
217
218 Note that single recovery action on a scmd can recover multiple
219 scmds. e.g. resetting a device recovers all failed scmds on the
220 device.
221
222 - Higher severity actions are taken iff eh_work_q is not empty after
223 lower severity actions are complete.
224
225 - EH reuses failed scmds to issue commands for recovery. For
226 timed-out scmds, SCSI EH ensures that LLDD forgets about a scmd
227 before reusing it for EH commands.
228
229 When a scmd is recovered, the scmd is moved from eh_work_q to EH
230local eh_done_q using scsi_eh_finish_cmd(). After all scmds are
231recovered (eh_work_q is empty), scsi_eh_flush_done_q() is invoked to
232either retry or error-finish (notify upper layer of failure) recovered
233scmds.
234
235 scmds are retried iff its sdev is still online (not offlined during
236EH), REQ_FAILFAST is not set and ++scmd->retries is less than
237scmd->allowed.
238
239
240[2-1-2] Flow of scmds through EH
241
242 1. Error completion / time out
243 ACTION: scsi_eh_scmd_add() is invoked for scmd
244 - set scmd->eh_eflags
245 - add scmd to shost->eh_cmd_q
246 - set SHOST_RECOVERY
247 - shost->host_failed++
248 LOCKING: shost->host_lock
249
250 2. EH starts
251 ACTION: move all scmds to EH's local eh_work_q. shost->eh_cmd_q
252 is cleared.
253 LOCKING: shost->host_lock (not strictly necessary, just for
254 consistency)
255
256 3. scmd recovered
257 ACTION: scsi_eh_finish_cmd() is invoked to EH-finish scmd
258 - shost->host_failed--
259 - clear scmd->eh_eflags
260 - scsi_setup_cmd_retry()
261 - move from local eh_work_q to local eh_done_q
262 LOCKING: none
263
264 4. EH completes
265 ACTION: scsi_eh_flush_done_q() retries scmds or notifies upper
266 layer of failure.
267 - scmd is removed from eh_done_q and scmd->eh_entry is cleared
268 - if retry is necessary, scmd is requeued using
269 scsi_queue_insert()
270 - otherwise, scsi_finish_command() is invoked for scmd
271 LOCKING: queue or finish function performs appropriate locking
272
273
274[2-1-3] Flow of control
275
276 EH through fine-grained callbacks start from scsi_unjam_host().
277
278<<scsi_unjam_host>>
279
280 1. Lock shost->host_lock, splice_init shost->eh_cmd_q into local
281 eh_work_q and unlock host_lock. Note that shost->eh_cmd_q is
282 cleared by this action.
283
284 2. Invoke scsi_eh_get_sense.
285
286 <<scsi_eh_get_sense>>
287
288 This action is taken for each error-completed
289 (!SCSI_EH_CANCEL_CMD) commands without valid sense data. Most
290 SCSI transports/LLDDs automatically acquire sense data on
291 command failures (autosense). Autosense is recommended for
292 performance reasons and as sense information could get out of
293 sync inbetween occurrence of CHECK CONDITION and this action.
294
295 Note that if autosense is not supported, scmd->sense_buffer
296 contains invalid sense data when error-completing the scmd
297 with scsi_done(). scsi_decide_disposition() always returns
298 FAILED in such cases thus invoking SCSI EH. When the scmd
299 reaches here, sense data is acquired and
300 scsi_decide_disposition() is called again.
301
302 1. Invoke scsi_request_sense() which issues REQUEST_SENSE
303 command. If fails, no action. Note that taking no action
304 causes higher-severity recovery to be taken for the scmd.
305
306 2. Invoke scsi_decide_disposition() on the scmd
307
308 - SUCCESS
309 scmd->retries is set to scmd->allowed preventing
310 scsi_eh_flush_done_q() from retrying the scmd and
311 scsi_eh_finish_cmd() is invoked.
312
313 - NEEDS_RETRY
314 scsi_eh_finish_cmd() invoked
315
316 - otherwise
317 No action.
318
319 3. If !list_empty(&eh_work_q), invoke scsi_eh_abort_cmds().
320
321 <<scsi_eh_abort_cmds>>
322
323 This action is taken for each timed out command.
324 hostt->eh_abort_handler() is invoked for each scmd. The
325 handler returns SUCCESS if it has succeeded to make LLDD and
326 all related hardware forget about the scmd.
327
328 If a timedout scmd is successfully aborted and the sdev is
329 either offline or ready, scsi_eh_finish_cmd() is invoked for
330 the scmd. Otherwise, the scmd is left in eh_work_q for
331 higher-severity actions.
332
333 Note that both offline and ready status mean that the sdev is
334 ready to process new scmds, where processing also implies
335 immediate failing; thus, if a sdev is in one of the two
336 states, no further recovery action is needed.
337
338 Device readiness is tested using scsi_eh_tur() which issues
339 TEST_UNIT_READY command. Note that the scmd must have been
340 aborted successfully before reusing it for TEST_UNIT_READY.
341
342 4. If !list_empty(&eh_work_q), invoke scsi_eh_ready_devs()
343
344 <<scsi_eh_ready_devs>>
345
346 This function takes four increasingly more severe measures to
347 make failed sdevs ready for new commands.
348
349 1. Invoke scsi_eh_stu()
350
351 <<scsi_eh_stu>>
352
353 For each sdev which has failed scmds with valid sense data
354 of which scsi_check_sense()'s verdict is FAILED,
355 START_STOP_UNIT command is issued w/ start=1. Note that
356 as we explicitly choose error-completed scmds, it is known
357 that lower layers have forgotten about the scmd and we can
358 reuse it for STU.
359
360 If STU succeeds and the sdev is either offline or ready,
361 all failed scmds on the sdev are EH-finished with
362 scsi_eh_finish_cmd().
363
364 *NOTE* If hostt->eh_abort_handler() isn't implemented or
365 failed, we may still have timed out scmds at this point
366 and STU doesn't make lower layers forget about those
367 scmds. Yet, this function EH-finish all scmds on the sdev
368 if STU succeeds leaving lower layers in an inconsistent
369 state. It seems that STU action should be taken only when
370 a sdev has no timed out scmd.
371
372 2. If !list_empty(&eh_work_q), invoke scsi_eh_bus_device_reset().
373
374 <<scsi_eh_bus_device_reset>>
375
376 This action is very similar to scsi_eh_stu() except that,
377 instead of issuing STU, hostt->eh_device_reset_handler()
378 is used. Also, as we're not issuing SCSI commands and
379 resetting clears all scmds on the sdev, there is no need
380 to choose error-completed scmds.
381
382 3. If !list_empty(&eh_work_q), invoke scsi_eh_bus_reset()
383
384 <<scsi_eh_bus_reset>>
385
386 hostt->eh_bus_reset_handler() is invoked for each channel
387 with failed scmds. If bus reset succeeds, all failed
388 scmds on all ready or offline sdevs on the channel are
389 EH-finished.
390
391 4. If !list_empty(&eh_work_q), invoke scsi_eh_host_reset()
392
393 <<scsi_eh_host_reset>>
394
395 This is the last resort. hostt->eh_host_reset_handler()
396 is invoked. If host reset succeeds, all failed scmds on
397 all ready or offline sdevs on the host are EH-finished.
398
399 5. If !list_empty(&eh_work_q), invoke scsi_eh_offline_sdevs()
400
401 <<scsi_eh_offline_sdevs>>
402
403 Take all sdevs which still have unrecovered scmds offline
404 and EH-finish the scmds.
405
406 5. Invoke scsi_eh_flush_done_q().
407
408 <<scsi_eh_flush_done_q>>
409
410 At this point all scmds are recovered (or given up) and
411 put on eh_done_q by scsi_eh_finish_cmd(). This function
412 flushes eh_done_q by either retrying or notifying upper
413 layer of failure of the scmds.
414
415
Christoph Hellwig9227c332006-04-01 19:21:04 +0200416[2-2] EH through transportt->eh_strategy_handler()
Tejun Heo70c83e12005-09-11 09:37:19 +0900417
Christoph Hellwig9227c332006-04-01 19:21:04 +0200418 transportt->eh_strategy_handler() is invoked in the place of
Tejun Heo70c83e12005-09-11 09:37:19 +0900419scsi_unjam_host() and it is responsible for whole recovery process.
420On completion, the handler should have made lower layers forget about
421all failed scmds and either ready for new commands or offline. Also,
422it should perform SCSI EH maintenance choirs to maintain integrity of
423SCSI midlayer. IOW, of the steps described in [2-1-2], all steps
424except for #1 must be implemented by eh_strategy_handler().
425
426
Christoph Hellwig9227c332006-04-01 19:21:04 +0200427[2-2-1] Pre transportt->eh_strategy_handler() SCSI midlayer conditions
Tejun Heo70c83e12005-09-11 09:37:19 +0900428
429 The following conditions are true on entry to the handler.
430
431 - Each failed scmd's eh_flags field is set appropriately.
432
433 - Each failed scmd is linked on scmd->eh_cmd_q by scmd->eh_entry.
434
435 - SHOST_RECOVERY is set.
436
437 - shost->host_failed == shost->host_busy
438
439
Christoph Hellwig9227c332006-04-01 19:21:04 +0200440[2-2-2] Post transportt->eh_strategy_handler() SCSI midlayer conditions
Tejun Heo70c83e12005-09-11 09:37:19 +0900441
442 The following conditions must be true on exit from the handler.
443
444 - shost->host_failed is zero.
445
446 - Each scmd's eh_eflags field is cleared.
447
448 - Each scmd is in such a state that scsi_setup_cmd_retry() on the
449 scmd doesn't make any difference.
450
451 - shost->eh_cmd_q is cleared.
452
453 - Each scmd->eh_entry is cleared.
454
455 - Either scsi_queue_insert() or scsi_finish_command() is called on
456 each scmd. Note that the handler is free to use scmd->retries and
457 ->allowed to limit the number of retries.
458
459
460[2-2-3] Things to consider
461
462 - Know that timed out scmds are still active on lower layers. Make
463 lower layers forget about them before doing anything else with
464 those scmds.
465
466 - For consistency, when accessing/modifying shost data structure,
467 grab shost->host_lock.
468
469 - On completion, each failed sdev must have forgotten about all
470 active scmds.
471
472 - On completion, each failed sdev must be ready for new commands or
473 offline.
474
475
476--
477Tejun Heo
478htejun@gmail.com
47911th September 2005