blob: be1aa1486d39360e2ceace2289f88fb765110c28 [file] [log] [blame]
Jeff Garzik669a5db2006-08-29 18:12:40 -04001/*
2 * pata_atiixp.c - ATI PATA for new ATA layer
3 * (C) 2005 Red Hat Inc
Bartlomiej Zolnierkiewicze99846f2010-02-17 13:17:31 +00004 * (C) 2009-2010 Bartlomiej Zolnierkiewicz
Jeff Garzik669a5db2006-08-29 18:12:40 -04005 *
6 * Based on
7 *
8 * linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004
9 *
10 * Copyright (C) 2003 ATI Inc. <hyu@ati.com>
11 * Copyright (C) 2004 Bartlomiej Zolnierkiewicz
12 *
13 */
14
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/pci.h>
18#include <linux/init.h>
19#include <linux/blkdev.h>
20#include <linux/delay.h>
21#include <scsi/scsi_host.h>
22#include <linux/libata.h>
23
24#define DRV_NAME "pata_atiixp"
Jeff Garzik2a3103c2007-08-31 04:54:06 -040025#define DRV_VERSION "0.4.6"
Jeff Garzik669a5db2006-08-29 18:12:40 -040026
27enum {
28 ATIIXP_IDE_PIO_TIMING = 0x40,
29 ATIIXP_IDE_MWDMA_TIMING = 0x44,
30 ATIIXP_IDE_PIO_CONTROL = 0x48,
31 ATIIXP_IDE_PIO_MODE = 0x4a,
32 ATIIXP_IDE_UDMA_CONTROL = 0x54,
33 ATIIXP_IDE_UDMA_MODE = 0x56
34};
35
Alan Cox84708602007-03-08 19:27:31 +000036static int atiixp_cable_detect(struct ata_port *ap)
37{
38 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
39 u8 udma;
40
41 /* Hack from drivers/ide/pci. Really we want to know how to do the
42 raw detection not play follow the bios mode guess */
43 pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
44 if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40)
45 return ATA_CBL_PATA80;
46 return ATA_CBL_PATA40;
47}
48
Bartlomiej Zolnierkiewicze99846f2010-02-17 13:17:31 +000049static DEFINE_SPINLOCK(atiixp_lock);
50
Jeff Garzik669a5db2006-08-29 18:12:40 -040051/**
Bartlomiej Zolnierkiewicz46b9e772011-10-11 19:55:09 +020052 * atiixp_prereset - perform reset handling
53 * @link: ATA link
54 * @deadline: deadline jiffies for the operation
55 *
56 * Reset sequence checking enable bits to see which ports are
57 * active.
58 */
59
60static int atiixp_prereset(struct ata_link *link, unsigned long deadline)
61{
62 static const struct pci_bits atiixp_enable_bits[] = {
63 { 0x48, 1, 0x01, 0x00 },
64 { 0x48, 1, 0x08, 0x00 }
65 };
66
67 struct ata_port *ap = link->ap;
68 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
69
70 if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
71 return -ENOENT;
72
73 return ata_sff_prereset(link, deadline);
74}
75
76/**
Jeff Garzik669a5db2006-08-29 18:12:40 -040077 * atiixp_set_pio_timing - set initial PIO mode data
78 * @ap: ATA interface
79 * @adev: ATA device
80 *
81 * Called by both the pio and dma setup functions to set the controller
82 * timings for PIO transfers. We must load both the mode number and
83 * timing values into the controller.
84 */
85
86static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio)
87{
88 static u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 };
89
90 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
91 int dn = 2 * ap->port_no + adev->devno;
Jeff Garzik669a5db2006-08-29 18:12:40 -040092 int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
Bartlomiej Zolnierkiewicz1fd4bbe2009-08-06 17:47:05 +020093 u32 pio_timing_data;
94 u16 pio_mode_data;
Jeff Garzik669a5db2006-08-29 18:12:40 -040095
96 pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
97 pio_mode_data &= ~(0x7 << (4 * dn));
98 pio_mode_data |= pio << (4 * dn);
99 pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
100
Bartlomiej Zolnierkiewicz1fd4bbe2009-08-06 17:47:05 +0200101 pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
Jeff Garzikd7b5a232008-04-29 17:39:45 -0400102 pio_timing_data &= ~(0xFF << timing_shift);
103 pio_timing_data |= (pio_timings[pio] << timing_shift);
Bartlomiej Zolnierkiewicz1fd4bbe2009-08-06 17:47:05 +0200104 pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400105}
106
107/**
108 * atiixp_set_piomode - set initial PIO mode data
109 * @ap: ATA interface
110 * @adev: ATA device
111 *
112 * Called to do the PIO mode setup. We use a shared helper for this
113 * as the DMA setup must also adjust the PIO timing information.
114 */
115
116static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev)
117{
Bartlomiej Zolnierkiewicze99846f2010-02-17 13:17:31 +0000118 unsigned long flags;
119 spin_lock_irqsave(&atiixp_lock, flags);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400120 atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
Bartlomiej Zolnierkiewicze99846f2010-02-17 13:17:31 +0000121 spin_unlock_irqrestore(&atiixp_lock, flags);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400122}
123
124/**
125 * atiixp_set_dmamode - set initial DMA mode data
126 * @ap: ATA interface
127 * @adev: ATA device
128 *
129 * Called to do the DMA mode setup. We use timing tables for most
130 * modes but must tune an appropriate PIO mode to match.
131 */
132
133static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
134{
135 static u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 };
136
137 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
138 int dma = adev->dma_mode;
139 int dn = 2 * ap->port_no + adev->devno;
140 int wanted_pio;
Bartlomiej Zolnierkiewicze99846f2010-02-17 13:17:31 +0000141 unsigned long flags;
142
143 spin_lock_irqsave(&atiixp_lock, flags);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400144
145 if (adev->dma_mode >= XFER_UDMA_0) {
146 u16 udma_mode_data;
147
148 dma -= XFER_UDMA_0;
149
150 pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data);
151 udma_mode_data &= ~(0x7 << (4 * dn));
152 udma_mode_data |= dma << (4 * dn);
153 pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
154 } else {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400155 int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
Bartlomiej Zolnierkiewicz1fd4bbe2009-08-06 17:47:05 +0200156 u32 mwdma_timing_data;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400157
158 dma -= XFER_MW_DMA_0;
159
Bartlomiej Zolnierkiewicz1fd4bbe2009-08-06 17:47:05 +0200160 pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
161 &mwdma_timing_data);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400162 mwdma_timing_data &= ~(0xFF << timing_shift);
163 mwdma_timing_data |= (mwdma_timings[dma] << timing_shift);
Bartlomiej Zolnierkiewicz1fd4bbe2009-08-06 17:47:05 +0200164 pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
165 mwdma_timing_data);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400166 }
167 /*
168 * We must now look at the PIO mode situation. We may need to
169 * adjust the PIO mode to keep the timings acceptable
170 */
171 if (adev->dma_mode >= XFER_MW_DMA_2)
172 wanted_pio = 4;
173 else if (adev->dma_mode == XFER_MW_DMA_1)
174 wanted_pio = 3;
175 else if (adev->dma_mode == XFER_MW_DMA_0)
176 wanted_pio = 0;
177 else BUG();
178
179 if (adev->pio_mode != wanted_pio)
180 atiixp_set_pio_timing(ap, adev, wanted_pio);
Bartlomiej Zolnierkiewicze99846f2010-02-17 13:17:31 +0000181 spin_unlock_irqrestore(&atiixp_lock, flags);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400182}
183
184/**
185 * atiixp_bmdma_start - DMA start callback
186 * @qc: Command in progress
187 *
188 * When DMA begins we need to ensure that the UDMA control
189 * register for the channel is correctly set.
Alan Cox21d2c922007-09-26 23:02:52 +0100190 *
191 * Note: The host lock held by the libata layer protects
192 * us from two channels both trying to set DMA bits at once
Jeff Garzik669a5db2006-08-29 18:12:40 -0400193 */
194
195static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
196{
197 struct ata_port *ap = qc->ap;
198 struct ata_device *adev = qc->dev;
199
200 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
201 int dn = (2 * ap->port_no) + adev->devno;
202 u16 tmp16;
203
204 pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
Alan Coxb15b3eb2008-08-01 09:18:34 +0100205 if (ata_using_udma(adev))
Jeff Garzik669a5db2006-08-29 18:12:40 -0400206 tmp16 |= (1 << dn);
207 else
208 tmp16 &= ~(1 << dn);
209 pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
210 ata_bmdma_start(qc);
211}
212
213/**
214 * atiixp_dma_stop - DMA stop callback
215 * @qc: Command in progress
216 *
217 * DMA has completed. Clear the UDMA flag as the next operations will
218 * be PIO ones not UDMA data transfer.
Alan Cox21d2c922007-09-26 23:02:52 +0100219 *
220 * Note: The host lock held by the libata layer protects
221 * us from two channels both trying to set DMA bits at once
Jeff Garzik669a5db2006-08-29 18:12:40 -0400222 */
223
224static void atiixp_bmdma_stop(struct ata_queued_cmd *qc)
225{
226 struct ata_port *ap = qc->ap;
227 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
228 int dn = (2 * ap->port_no) + qc->dev->devno;
229 u16 tmp16;
230
231 pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
232 tmp16 &= ~(1 << dn);
233 pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
234 ata_bmdma_stop(qc);
235}
236
237static struct scsi_host_template atiixp_sht = {
Tejun Heo68d1d072008-03-25 12:22:49 +0900238 ATA_BMDMA_SHT(DRV_NAME),
Alan Cox635adc22008-02-20 20:09:23 +0000239 .sg_tablesize = LIBATA_DUMB_MAX_PRD,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400240};
241
242static struct ata_port_operations atiixp_port_ops = {
Tejun Heo029cfd62008-03-25 12:22:49 +0900243 .inherits = &ata_bmdma_port_ops,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400244
Tejun Heof47451c2010-05-10 21:41:40 +0200245 .qc_prep = ata_bmdma_dumb_qc_prep,
Tejun Heo029cfd62008-03-25 12:22:49 +0900246 .bmdma_start = atiixp_bmdma_start,
247 .bmdma_stop = atiixp_bmdma_stop,
Jeff Garzikbda30282006-09-27 05:41:13 -0400248
Bartlomiej Zolnierkiewicz46b9e772011-10-11 19:55:09 +0200249 .prereset = atiixp_prereset,
Tejun Heo029cfd62008-03-25 12:22:49 +0900250 .cable_detect = atiixp_cable_detect,
251 .set_piomode = atiixp_set_piomode,
252 .set_dmamode = atiixp_set_dmamode,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400253};
254
Tejun Heo16028232009-01-16 15:27:27 +0900255static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
Jeff Garzik669a5db2006-08-29 18:12:40 -0400256{
Tejun Heo1626aeb2007-05-04 12:43:58 +0200257 static const struct ata_port_info info = {
Jeff Garzik1d2808f2007-05-28 06:59:48 -0400258 .flags = ATA_FLAG_SLAVE_POSS,
Erik Inge Bolsø14bdef92009-03-14 21:38:24 +0100259 .pio_mask = ATA_PIO4,
260 .mwdma_mask = ATA_MWDMA12_ONLY,
261 .udma_mask = ATA_UDMA5,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400262 .port_ops = &atiixp_port_ops
263 };
Tejun Heo16028232009-01-16 15:27:27 +0900264 const struct ata_port_info *ppi[] = { &info, &info };
Tejun Heo16028232009-01-16 15:27:27 +0900265
Tejun Heo1c5afdf2010-05-19 22:10:22 +0200266 return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
267 ATA_HOST_PARALLEL_SCAN);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400268}
269
Jeff Garzik2d2744f2006-09-28 20:21:59 -0400270static const struct pci_device_id atiixp[] = {
271 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), },
272 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), },
273 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
274 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
Jeff Garzik1ca972c2007-05-24 23:05:25 -0400275 { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
Shane Huang5deab532009-10-13 11:14:00 +0800276 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), },
Jeff Garzik2d2744f2006-09-28 20:21:59 -0400277
278 { },
Jeff Garzik669a5db2006-08-29 18:12:40 -0400279};
280
281static struct pci_driver atiixp_pci_driver = {
282 .name = DRV_NAME,
283 .id_table = atiixp,
284 .probe = atiixp_init_one,
Alan30ced0f2006-11-22 16:57:36 +0000285 .remove = ata_pci_remove_one,
Tejun Heo438ac6d2007-03-02 17:31:26 +0900286#ifdef CONFIG_PM
Alan30ced0f2006-11-22 16:57:36 +0000287 .resume = ata_pci_device_resume,
288 .suspend = ata_pci_device_suspend,
Tejun Heo438ac6d2007-03-02 17:31:26 +0900289#endif
Jeff Garzik669a5db2006-08-29 18:12:40 -0400290};
291
292static int __init atiixp_init(void)
293{
294 return pci_register_driver(&atiixp_pci_driver);
295}
296
297
298static void __exit atiixp_exit(void)
299{
300 pci_unregister_driver(&atiixp_pci_driver);
301}
302
Jeff Garzik669a5db2006-08-29 18:12:40 -0400303MODULE_AUTHOR("Alan Cox");
304MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400");
305MODULE_LICENSE("GPL");
306MODULE_DEVICE_TABLE(pci, atiixp);
307MODULE_VERSION(DRV_VERSION);
308
309module_init(atiixp_init);
310module_exit(atiixp_exit);