blob: d6d425773fa497274301eaa88f247fb8dd770e89 [file] [log] [blame]
Heiko Stübner34ee55072012-02-16 11:42:32 +01001/*
2 * S3C2416/2450 CPUfreq Support
3 *
4 * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
5 *
6 * based on s3c64xx_cpufreq.c
7 *
8 * Copyright 2009 Wolfson Microelectronics plc
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14
15#include <linux/kernel.h>
16#include <linux/types.h>
17#include <linux/init.h>
18#include <linux/cpufreq.h>
19#include <linux/clk.h>
20#include <linux/err.h>
21#include <linux/regulator/consumer.h>
22#include <linux/reboot.h>
23#include <linux/module.h>
24
25static DEFINE_MUTEX(cpufreq_lock);
26
27struct s3c2416_data {
28 struct clk *armdiv;
29 struct clk *armclk;
30 struct clk *hclk;
31
32 unsigned long regulator_latency;
33#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
34 struct regulator *vddarm;
35#endif
36
37 struct cpufreq_frequency_table *freq_table;
38
39 bool is_dvs;
40 bool disable_dvs;
41};
42
43static struct s3c2416_data s3c2416_cpufreq;
44
45struct s3c2416_dvfs {
46 unsigned int vddarm_min;
47 unsigned int vddarm_max;
48};
49
50/* pseudo-frequency for dvs mode */
51#define FREQ_DVS 132333
52
53/* frequency to sleep and reboot in
54 * it's essential to leave dvs, as some boards do not reconfigure the
55 * regulator on reboot
56 */
57#define FREQ_SLEEP 133333
58
59/* Sources for the ARMCLK */
60#define SOURCE_HCLK 0
61#define SOURCE_ARMDIV 1
62
63#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
64/* S3C2416 only supports changing the voltage in the dvs-mode.
65 * Voltages down to 1.0V seem to work, so we take what the regulator
66 * can get us.
67 */
68static struct s3c2416_dvfs s3c2416_dvfs_table[] = {
69 [SOURCE_HCLK] = { 950000, 1250000 },
70 [SOURCE_ARMDIV] = { 1250000, 1350000 },
71};
72#endif
73
74static struct cpufreq_frequency_table s3c2416_freq_table[] = {
Viresh Kumar7f4b0462014-03-28 19:11:47 +053075 { 0, SOURCE_HCLK, FREQ_DVS },
76 { 0, SOURCE_ARMDIV, 133333 },
77 { 0, SOURCE_ARMDIV, 266666 },
78 { 0, SOURCE_ARMDIV, 400000 },
79 { 0, 0, CPUFREQ_TABLE_END },
Heiko Stübner34ee55072012-02-16 11:42:32 +010080};
81
82static struct cpufreq_frequency_table s3c2450_freq_table[] = {
Viresh Kumar7f4b0462014-03-28 19:11:47 +053083 { 0, SOURCE_HCLK, FREQ_DVS },
84 { 0, SOURCE_ARMDIV, 133500 },
85 { 0, SOURCE_ARMDIV, 267000 },
86 { 0, SOURCE_ARMDIV, 534000 },
87 { 0, 0, CPUFREQ_TABLE_END },
Heiko Stübner34ee55072012-02-16 11:42:32 +010088};
89
Heiko Stübner34ee55072012-02-16 11:42:32 +010090static unsigned int s3c2416_cpufreq_get_speed(unsigned int cpu)
91{
92 struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
93
94 if (cpu != 0)
95 return 0;
96
97 /* return our pseudo-frequency when in dvs mode */
98 if (s3c_freq->is_dvs)
99 return FREQ_DVS;
100
101 return clk_get_rate(s3c_freq->armclk) / 1000;
102}
103
104static int s3c2416_cpufreq_set_armdiv(struct s3c2416_data *s3c_freq,
105 unsigned int freq)
106{
107 int ret;
108
109 if (clk_get_rate(s3c_freq->armdiv) / 1000 != freq) {
110 ret = clk_set_rate(s3c_freq->armdiv, freq * 1000);
111 if (ret < 0) {
112 pr_err("cpufreq: Failed to set armdiv rate %dkHz: %d\n",
113 freq, ret);
114 return ret;
115 }
116 }
117
118 return 0;
119}
120
121static int s3c2416_cpufreq_enter_dvs(struct s3c2416_data *s3c_freq, int idx)
122{
123#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
124 struct s3c2416_dvfs *dvfs;
125#endif
126 int ret;
127
128 if (s3c_freq->is_dvs) {
129 pr_debug("cpufreq: already in dvs mode, nothing to do\n");
130 return 0;
131 }
132
133 pr_debug("cpufreq: switching armclk to hclk (%lukHz)\n",
134 clk_get_rate(s3c_freq->hclk) / 1000);
135 ret = clk_set_parent(s3c_freq->armclk, s3c_freq->hclk);
136 if (ret < 0) {
137 pr_err("cpufreq: Failed to switch armclk to hclk: %d\n", ret);
138 return ret;
139 }
140
141#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
142 /* changing the core voltage is only allowed when in dvs mode */
143 if (s3c_freq->vddarm) {
144 dvfs = &s3c2416_dvfs_table[idx];
145
Masanari Iidac03c3012012-07-18 09:09:27 +0900146 pr_debug("cpufreq: setting regulator to %d-%d\n",
Heiko Stübner34ee55072012-02-16 11:42:32 +0100147 dvfs->vddarm_min, dvfs->vddarm_max);
148 ret = regulator_set_voltage(s3c_freq->vddarm,
149 dvfs->vddarm_min,
150 dvfs->vddarm_max);
151
152 /* when lowering the voltage failed, there is nothing to do */
153 if (ret != 0)
154 pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
155 }
156#endif
157
158 s3c_freq->is_dvs = 1;
159
160 return 0;
161}
162
163static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx)
164{
165#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
166 struct s3c2416_dvfs *dvfs;
167#endif
168 int ret;
169
170 if (!s3c_freq->is_dvs) {
171 pr_debug("cpufreq: not in dvs mode, so can't leave\n");
172 return 0;
173 }
174
175#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
176 if (s3c_freq->vddarm) {
177 dvfs = &s3c2416_dvfs_table[idx];
178
Masanari Iidac03c3012012-07-18 09:09:27 +0900179 pr_debug("cpufreq: setting regulator to %d-%d\n",
Heiko Stübner34ee55072012-02-16 11:42:32 +0100180 dvfs->vddarm_min, dvfs->vddarm_max);
181 ret = regulator_set_voltage(s3c_freq->vddarm,
182 dvfs->vddarm_min,
183 dvfs->vddarm_max);
184 if (ret != 0) {
185 pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
186 return ret;
187 }
188 }
189#endif
190
191 /* force armdiv to hclk frequency for transition from dvs*/
192 if (clk_get_rate(s3c_freq->armdiv) > clk_get_rate(s3c_freq->hclk)) {
193 pr_debug("cpufreq: force armdiv to hclk frequency (%lukHz)\n",
194 clk_get_rate(s3c_freq->hclk) / 1000);
195 ret = s3c2416_cpufreq_set_armdiv(s3c_freq,
196 clk_get_rate(s3c_freq->hclk) / 1000);
197 if (ret < 0) {
Masanari Iida278cee02013-06-01 01:30:56 +0900198 pr_err("cpufreq: Failed to set the armdiv to %lukHz: %d\n",
Heiko Stübner34ee55072012-02-16 11:42:32 +0100199 clk_get_rate(s3c_freq->hclk) / 1000, ret);
200 return ret;
201 }
202 }
203
204 pr_debug("cpufreq: switching armclk parent to armdiv (%lukHz)\n",
205 clk_get_rate(s3c_freq->armdiv) / 1000);
206
207 ret = clk_set_parent(s3c_freq->armclk, s3c_freq->armdiv);
208 if (ret < 0) {
209 pr_err("cpufreq: Failed to switch armclk clock parent to armdiv: %d\n",
210 ret);
211 return ret;
212 }
213
214 s3c_freq->is_dvs = 0;
215
216 return 0;
217}
218
219static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
Viresh Kumar9c0ebcf2013-10-25 19:45:48 +0530220 unsigned int index)
Heiko Stübner34ee55072012-02-16 11:42:32 +0100221{
222 struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
Viresh Kumard4019f02013-08-14 19:38:24 +0530223 unsigned int new_freq;
Heiko Stübner34ee55072012-02-16 11:42:32 +0100224 int idx, ret, to_dvs = 0;
Heiko Stübner34ee55072012-02-16 11:42:32 +0100225
226 mutex_lock(&cpufreq_lock);
227
Viresh Kumar9c0ebcf2013-10-25 19:45:48 +0530228 idx = s3c_freq->freq_table[index].driver_data;
Heiko Stübner34ee55072012-02-16 11:42:32 +0100229
230 if (idx == SOURCE_HCLK)
231 to_dvs = 1;
232
233 /* switching to dvs when it's not allowed */
234 if (to_dvs && s3c_freq->disable_dvs) {
235 pr_debug("cpufreq: entering dvs mode not allowed\n");
236 ret = -EINVAL;
237 goto out;
238 }
239
Heiko Stübner34ee55072012-02-16 11:42:32 +0100240 /* When leavin dvs mode, always switch the armdiv to the hclk rate
241 * The S3C2416 has stability issues when switching directly to
242 * higher frequencies.
243 */
Viresh Kumard4019f02013-08-14 19:38:24 +0530244 new_freq = (s3c_freq->is_dvs && !to_dvs)
Heiko Stübner34ee55072012-02-16 11:42:32 +0100245 ? clk_get_rate(s3c_freq->hclk) / 1000
Viresh Kumar9c0ebcf2013-10-25 19:45:48 +0530246 : s3c_freq->freq_table[index].frequency;
Heiko Stübner34ee55072012-02-16 11:42:32 +0100247
Heiko Stübner34ee55072012-02-16 11:42:32 +0100248 if (to_dvs) {
249 pr_debug("cpufreq: enter dvs\n");
250 ret = s3c2416_cpufreq_enter_dvs(s3c_freq, idx);
251 } else if (s3c_freq->is_dvs) {
252 pr_debug("cpufreq: leave dvs\n");
253 ret = s3c2416_cpufreq_leave_dvs(s3c_freq, idx);
254 } else {
Viresh Kumard4019f02013-08-14 19:38:24 +0530255 pr_debug("cpufreq: change armdiv to %dkHz\n", new_freq);
256 ret = s3c2416_cpufreq_set_armdiv(s3c_freq, new_freq);
Heiko Stübner34ee55072012-02-16 11:42:32 +0100257 }
258
Heiko Stübner34ee55072012-02-16 11:42:32 +0100259out:
260 mutex_unlock(&cpufreq_lock);
261
262 return ret;
263}
264
265#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
Arnd Bergmann61882b62015-02-18 21:55:03 +0100266static void s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
Heiko Stübner34ee55072012-02-16 11:42:32 +0100267{
268 int count, v, i, found;
Stratos Karafotis041526f2014-04-25 23:15:38 +0300269 struct cpufreq_frequency_table *pos;
Heiko Stübner34ee55072012-02-16 11:42:32 +0100270 struct s3c2416_dvfs *dvfs;
271
272 count = regulator_count_voltages(s3c_freq->vddarm);
273 if (count < 0) {
274 pr_err("cpufreq: Unable to check supported voltages\n");
275 return;
276 }
277
Stratos Karafotis041526f2014-04-25 23:15:38 +0300278 if (!count)
279 goto out;
Heiko Stübner34ee55072012-02-16 11:42:32 +0100280
Stratos Karafotis041526f2014-04-25 23:15:38 +0300281 cpufreq_for_each_valid_entry(pos, s3c_freq->freq_table) {
282 dvfs = &s3c2416_dvfs_table[pos->driver_data];
Heiko Stübner34ee55072012-02-16 11:42:32 +0100283 found = 0;
284
285 /* Check only the min-voltage, more is always ok on S3C2416 */
286 for (i = 0; i < count; i++) {
287 v = regulator_list_voltage(s3c_freq->vddarm, i);
288 if (v >= dvfs->vddarm_min)
289 found = 1;
290 }
291
292 if (!found) {
293 pr_debug("cpufreq: %dkHz unsupported by regulator\n",
Stratos Karafotis041526f2014-04-25 23:15:38 +0300294 pos->frequency);
295 pos->frequency = CPUFREQ_ENTRY_INVALID;
Heiko Stübner34ee55072012-02-16 11:42:32 +0100296 }
Heiko Stübner34ee55072012-02-16 11:42:32 +0100297 }
298
Stratos Karafotis041526f2014-04-25 23:15:38 +0300299out:
Heiko Stübner34ee55072012-02-16 11:42:32 +0100300 /* Guessed */
301 s3c_freq->regulator_latency = 1 * 1000 * 1000;
302}
303#endif
304
305static int s3c2416_cpufreq_reboot_notifier_evt(struct notifier_block *this,
306 unsigned long event, void *ptr)
307{
308 struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
309 int ret;
310
311 mutex_lock(&cpufreq_lock);
312
313 /* disable further changes */
314 s3c_freq->disable_dvs = 1;
315
316 mutex_unlock(&cpufreq_lock);
317
318 /* some boards don't reconfigure the regulator on reboot, which
319 * could lead to undervolting the cpu when the clock is reset.
320 * Therefore we always leave the DVS mode on reboot.
321 */
322 if (s3c_freq->is_dvs) {
323 pr_debug("cpufreq: leave dvs on reboot\n");
324 ret = cpufreq_driver_target(cpufreq_cpu_get(0), FREQ_SLEEP, 0);
325 if (ret < 0)
326 return NOTIFY_BAD;
327 }
328
329 return NOTIFY_DONE;
330}
331
332static struct notifier_block s3c2416_cpufreq_reboot_notifier = {
333 .notifier_call = s3c2416_cpufreq_reboot_notifier_evt,
334};
335
Arnd Bergmann61882b62015-02-18 21:55:03 +0100336static int s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
Heiko Stübner34ee55072012-02-16 11:42:32 +0100337{
338 struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
Stratos Karafotis041526f2014-04-25 23:15:38 +0300339 struct cpufreq_frequency_table *pos;
Heiko Stübner34ee55072012-02-16 11:42:32 +0100340 struct clk *msysclk;
341 unsigned long rate;
342 int ret;
343
344 if (policy->cpu != 0)
345 return -EINVAL;
346
347 msysclk = clk_get(NULL, "msysclk");
348 if (IS_ERR(msysclk)) {
349 ret = PTR_ERR(msysclk);
350 pr_err("cpufreq: Unable to obtain msysclk: %d\n", ret);
351 return ret;
352 }
353
354 /*
355 * S3C2416 and S3C2450 share the same processor-ID and also provide no
356 * other means to distinguish them other than through the rate of
357 * msysclk. On S3C2416 msysclk runs at 800MHz and on S3C2450 at 533MHz.
358 */
359 rate = clk_get_rate(msysclk);
360 if (rate == 800 * 1000 * 1000) {
361 pr_info("cpufreq: msysclk running at %lukHz, using S3C2416 frequency table\n",
362 rate / 1000);
363 s3c_freq->freq_table = s3c2416_freq_table;
364 policy->cpuinfo.max_freq = 400000;
365 } else if (rate / 1000 == 534000) {
366 pr_info("cpufreq: msysclk running at %lukHz, using S3C2450 frequency table\n",
367 rate / 1000);
368 s3c_freq->freq_table = s3c2450_freq_table;
369 policy->cpuinfo.max_freq = 534000;
370 }
371
372 /* not needed anymore */
373 clk_put(msysclk);
374
375 if (s3c_freq->freq_table == NULL) {
376 pr_err("cpufreq: No frequency information for this CPU, msysclk at %lukHz\n",
377 rate / 1000);
378 return -ENODEV;
379 }
380
381 s3c_freq->is_dvs = 0;
382
383 s3c_freq->armdiv = clk_get(NULL, "armdiv");
384 if (IS_ERR(s3c_freq->armdiv)) {
385 ret = PTR_ERR(s3c_freq->armdiv);
386 pr_err("cpufreq: Unable to obtain ARMDIV: %d\n", ret);
387 return ret;
388 }
389
390 s3c_freq->hclk = clk_get(NULL, "hclk");
391 if (IS_ERR(s3c_freq->hclk)) {
392 ret = PTR_ERR(s3c_freq->hclk);
393 pr_err("cpufreq: Unable to obtain HCLK: %d\n", ret);
394 goto err_hclk;
395 }
396
397 /* chech hclk rate, we only support the common 133MHz for now
398 * hclk could also run at 66MHz, but this not often used
399 */
400 rate = clk_get_rate(s3c_freq->hclk);
401 if (rate < 133 * 1000 * 1000) {
402 pr_err("cpufreq: HCLK not at 133MHz\n");
403 clk_put(s3c_freq->hclk);
404 ret = -EINVAL;
405 goto err_armclk;
406 }
407
408 s3c_freq->armclk = clk_get(NULL, "armclk");
409 if (IS_ERR(s3c_freq->armclk)) {
410 ret = PTR_ERR(s3c_freq->armclk);
411 pr_err("cpufreq: Unable to obtain ARMCLK: %d\n", ret);
412 goto err_armclk;
413 }
414
415#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
416 s3c_freq->vddarm = regulator_get(NULL, "vddarm");
417 if (IS_ERR(s3c_freq->vddarm)) {
418 ret = PTR_ERR(s3c_freq->vddarm);
419 pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
420 goto err_vddarm;
421 }
422
423 s3c2416_cpufreq_cfg_regulator(s3c_freq);
424#else
425 s3c_freq->regulator_latency = 0;
426#endif
427
Stratos Karafotis041526f2014-04-25 23:15:38 +0300428 cpufreq_for_each_entry(pos, s3c_freq->freq_table) {
Heiko Stübner34ee55072012-02-16 11:42:32 +0100429 /* special handling for dvs mode */
Stratos Karafotis041526f2014-04-25 23:15:38 +0300430 if (pos->driver_data == 0) {
Heiko Stübner34ee55072012-02-16 11:42:32 +0100431 if (!s3c_freq->hclk) {
432 pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n",
Stratos Karafotis041526f2014-04-25 23:15:38 +0300433 pos->frequency);
434 pos->frequency = CPUFREQ_ENTRY_INVALID;
Heiko Stübner34ee55072012-02-16 11:42:32 +0100435 } else {
Heiko Stübner34ee55072012-02-16 11:42:32 +0100436 continue;
437 }
438 }
439
440 /* Check for frequencies we can generate */
441 rate = clk_round_rate(s3c_freq->armdiv,
Stratos Karafotis041526f2014-04-25 23:15:38 +0300442 pos->frequency * 1000);
Heiko Stübner34ee55072012-02-16 11:42:32 +0100443 rate /= 1000;
Stratos Karafotis041526f2014-04-25 23:15:38 +0300444 if (rate != pos->frequency) {
Heiko Stübner34ee55072012-02-16 11:42:32 +0100445 pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n",
Stratos Karafotis041526f2014-04-25 23:15:38 +0300446 pos->frequency, rate);
447 pos->frequency = CPUFREQ_ENTRY_INVALID;
Heiko Stübner34ee55072012-02-16 11:42:32 +0100448 }
Heiko Stübner34ee55072012-02-16 11:42:32 +0100449 }
450
Heiko Stübner34ee55072012-02-16 11:42:32 +0100451 /* Datasheet says PLL stabalisation time must be at least 300us,
452 * so but add some fudge. (reference in LOCKCON0 register description)
453 */
Viresh Kumara307a1e2013-10-03 20:29:22 +0530454 ret = cpufreq_generic_init(policy, s3c_freq->freq_table,
455 (500 * 1000) + s3c_freq->regulator_latency);
Heiko Stübner34ee55072012-02-16 11:42:32 +0100456 if (ret)
457 goto err_freq_table;
458
Heiko Stübner34ee55072012-02-16 11:42:32 +0100459 register_reboot_notifier(&s3c2416_cpufreq_reboot_notifier);
460
461 return 0;
462
463err_freq_table:
464#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
465 regulator_put(s3c_freq->vddarm);
466err_vddarm:
467#endif
468 clk_put(s3c_freq->armclk);
469err_armclk:
470 clk_put(s3c_freq->hclk);
471err_hclk:
472 clk_put(s3c_freq->armdiv);
473
474 return ret;
475}
476
Heiko Stübner34ee55072012-02-16 11:42:32 +0100477static struct cpufreq_driver s3c2416_cpufreq_driver = {
Viresh Kumarae6b4272013-12-03 11:20:45 +0530478 .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
Viresh Kumare96a4102013-10-03 20:28:21 +0530479 .verify = cpufreq_generic_frequency_table_verify,
Viresh Kumar9c0ebcf2013-10-25 19:45:48 +0530480 .target_index = s3c2416_cpufreq_set_target,
Heiko Stübner34ee55072012-02-16 11:42:32 +0100481 .get = s3c2416_cpufreq_get_speed,
482 .init = s3c2416_cpufreq_driver_init,
483 .name = "s3c2416",
Viresh Kumare96a4102013-10-03 20:28:21 +0530484 .attr = cpufreq_generic_attr,
Heiko Stübner34ee55072012-02-16 11:42:32 +0100485};
486
487static int __init s3c2416_cpufreq_init(void)
488{
489 return cpufreq_register_driver(&s3c2416_cpufreq_driver);
490}
491module_init(s3c2416_cpufreq_init);