| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1 | /******************************************************************* |
| 2 | * This file is part of the Emulex Linux Device Driver for * |
James.Smart@Emulex.Com | c44ce17 | 2005-06-25 10:34:39 -0400 | [diff] [blame] | 3 | * Fibre Channel Host Bus Adapters. * |
James Smart | d8e93df | 2009-05-22 14:53:05 -0400 | [diff] [blame^] | 4 | * Copyright (C) 2004-2009 Emulex. All rights reserved. * |
James.Smart@Emulex.Com | c44ce17 | 2005-06-25 10:34:39 -0400 | [diff] [blame] | 5 | * EMULEX and SLI are trademarks of Emulex. * |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 6 | * www.emulex.com * |
James.Smart@Emulex.Com | c44ce17 | 2005-06-25 10:34:39 -0400 | [diff] [blame] | 7 | * Portions Copyright (C) 2004-2005 Christoph Hellwig * |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 8 | * * |
| 9 | * This program is free software; you can redistribute it and/or * |
James.Smart@Emulex.Com | c44ce17 | 2005-06-25 10:34:39 -0400 | [diff] [blame] | 10 | * modify it under the terms of version 2 of the GNU General * |
| 11 | * Public License as published by the Free Software Foundation. * |
| 12 | * This program is distributed in the hope that it will be useful. * |
| 13 | * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * |
| 14 | * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * |
| 15 | * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * |
| 16 | * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * |
| 17 | * TO BE LEGALLY INVALID. See the GNU General Public License for * |
| 18 | * more details, a copy of which can be found in the file COPYING * |
| 19 | * included with this package. * |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 20 | *******************************************************************/ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 21 | #include <linux/pci.h> |
| 22 | #include <linux/interrupt.h> |
James Smart | a90f568 | 2006-08-17 11:58:04 -0400 | [diff] [blame] | 23 | #include <linux/delay.h> |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 24 | #include <asm/unaligned.h> |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 25 | |
| 26 | #include <scsi/scsi.h> |
| 27 | #include <scsi/scsi_device.h> |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 28 | #include <scsi/scsi_eh.h> |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 29 | #include <scsi/scsi_host.h> |
| 30 | #include <scsi/scsi_tcq.h> |
| 31 | #include <scsi/scsi_transport_fc.h> |
| 32 | |
| 33 | #include "lpfc_version.h" |
James Smart | da0436e | 2009-05-22 14:51:39 -0400 | [diff] [blame] | 34 | #include "lpfc_hw4.h" |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 35 | #include "lpfc_hw.h" |
| 36 | #include "lpfc_sli.h" |
James Smart | da0436e | 2009-05-22 14:51:39 -0400 | [diff] [blame] | 37 | #include "lpfc_sli4.h" |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 38 | #include "lpfc_nl.h" |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 39 | #include "lpfc_disc.h" |
| 40 | #include "lpfc_scsi.h" |
| 41 | #include "lpfc.h" |
| 42 | #include "lpfc_logmsg.h" |
| 43 | #include "lpfc_crtn.h" |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 44 | #include "lpfc_vport.h" |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 45 | |
| 46 | #define LPFC_RESET_WAIT 2 |
| 47 | #define LPFC_ABORT_WAIT 2 |
| 48 | |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 49 | int _dump_buf_done; |
| 50 | |
| 51 | static char *dif_op_str[] = { |
| 52 | "SCSI_PROT_NORMAL", |
| 53 | "SCSI_PROT_READ_INSERT", |
| 54 | "SCSI_PROT_WRITE_STRIP", |
| 55 | "SCSI_PROT_READ_STRIP", |
| 56 | "SCSI_PROT_WRITE_INSERT", |
| 57 | "SCSI_PROT_READ_PASS", |
| 58 | "SCSI_PROT_WRITE_PASS", |
| 59 | "SCSI_PROT_READ_CONVERT", |
| 60 | "SCSI_PROT_WRITE_CONVERT" |
| 61 | }; |
James Smart | da0436e | 2009-05-22 14:51:39 -0400 | [diff] [blame] | 62 | static void |
| 63 | lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb); |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 64 | |
| 65 | static void |
| 66 | lpfc_debug_save_data(struct scsi_cmnd *cmnd) |
| 67 | { |
| 68 | void *src, *dst; |
| 69 | struct scatterlist *sgde = scsi_sglist(cmnd); |
| 70 | |
| 71 | if (!_dump_buf_data) { |
| 72 | printk(KERN_ERR "BLKGRD ERROR %s _dump_buf_data is NULL\n", |
| 73 | __func__); |
| 74 | return; |
| 75 | } |
| 76 | |
| 77 | |
| 78 | if (!sgde) { |
| 79 | printk(KERN_ERR "BLKGRD ERROR: data scatterlist is null\n"); |
| 80 | return; |
| 81 | } |
| 82 | |
| 83 | dst = (void *) _dump_buf_data; |
| 84 | while (sgde) { |
| 85 | src = sg_virt(sgde); |
| 86 | memcpy(dst, src, sgde->length); |
| 87 | dst += sgde->length; |
| 88 | sgde = sg_next(sgde); |
| 89 | } |
| 90 | } |
| 91 | |
| 92 | static void |
| 93 | lpfc_debug_save_dif(struct scsi_cmnd *cmnd) |
| 94 | { |
| 95 | void *src, *dst; |
| 96 | struct scatterlist *sgde = scsi_prot_sglist(cmnd); |
| 97 | |
| 98 | if (!_dump_buf_dif) { |
| 99 | printk(KERN_ERR "BLKGRD ERROR %s _dump_buf_data is NULL\n", |
| 100 | __func__); |
| 101 | return; |
| 102 | } |
| 103 | |
| 104 | if (!sgde) { |
| 105 | printk(KERN_ERR "BLKGRD ERROR: prot scatterlist is null\n"); |
| 106 | return; |
| 107 | } |
| 108 | |
| 109 | dst = _dump_buf_dif; |
| 110 | while (sgde) { |
| 111 | src = sg_virt(sgde); |
| 112 | memcpy(dst, src, sgde->length); |
| 113 | dst += sgde->length; |
| 114 | sgde = sg_next(sgde); |
| 115 | } |
| 116 | } |
| 117 | |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 118 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 119 | * lpfc_update_stats - Update statistical data for the command completion |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 120 | * @phba: Pointer to HBA object. |
| 121 | * @lpfc_cmd: lpfc scsi command object pointer. |
| 122 | * |
| 123 | * This function is called when there is a command completion and this |
| 124 | * function updates the statistical data for the command completion. |
| 125 | **/ |
| 126 | static void |
| 127 | lpfc_update_stats(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) |
| 128 | { |
| 129 | struct lpfc_rport_data *rdata = lpfc_cmd->rdata; |
| 130 | struct lpfc_nodelist *pnode = rdata->pnode; |
| 131 | struct scsi_cmnd *cmd = lpfc_cmd->pCmd; |
| 132 | unsigned long flags; |
| 133 | struct Scsi_Host *shost = cmd->device->host; |
| 134 | struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; |
| 135 | unsigned long latency; |
| 136 | int i; |
| 137 | |
| 138 | if (cmd->result) |
| 139 | return; |
| 140 | |
James Smart | 9f1e1b5 | 2008-12-04 22:39:40 -0500 | [diff] [blame] | 141 | latency = jiffies_to_msecs((long)jiffies - (long)lpfc_cmd->start_time); |
| 142 | |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 143 | spin_lock_irqsave(shost->host_lock, flags); |
| 144 | if (!vport->stat_data_enabled || |
| 145 | vport->stat_data_blocked || |
| 146 | !pnode->lat_data || |
| 147 | (phba->bucket_type == LPFC_NO_BUCKET)) { |
| 148 | spin_unlock_irqrestore(shost->host_lock, flags); |
| 149 | return; |
| 150 | } |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 151 | |
| 152 | if (phba->bucket_type == LPFC_LINEAR_BUCKET) { |
| 153 | i = (latency + phba->bucket_step - 1 - phba->bucket_base)/ |
| 154 | phba->bucket_step; |
James Smart | 9f1e1b5 | 2008-12-04 22:39:40 -0500 | [diff] [blame] | 155 | /* check array subscript bounds */ |
| 156 | if (i < 0) |
| 157 | i = 0; |
| 158 | else if (i >= LPFC_MAX_BUCKET_COUNT) |
| 159 | i = LPFC_MAX_BUCKET_COUNT - 1; |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 160 | } else { |
| 161 | for (i = 0; i < LPFC_MAX_BUCKET_COUNT-1; i++) |
| 162 | if (latency <= (phba->bucket_base + |
| 163 | ((1<<i)*phba->bucket_step))) |
| 164 | break; |
| 165 | } |
| 166 | |
| 167 | pnode->lat_data[i].cmd_count++; |
| 168 | spin_unlock_irqrestore(shost->host_lock, flags); |
| 169 | } |
| 170 | |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 171 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 172 | * lpfc_send_sdev_queuedepth_change_event - Posts a queuedepth change event |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 173 | * @phba: Pointer to HBA context object. |
| 174 | * @vport: Pointer to vport object. |
| 175 | * @ndlp: Pointer to FC node associated with the target. |
| 176 | * @lun: Lun number of the scsi device. |
| 177 | * @old_val: Old value of the queue depth. |
| 178 | * @new_val: New value of the queue depth. |
| 179 | * |
| 180 | * This function sends an event to the mgmt application indicating |
| 181 | * there is a change in the scsi device queue depth. |
| 182 | **/ |
| 183 | static void |
| 184 | lpfc_send_sdev_queuedepth_change_event(struct lpfc_hba *phba, |
| 185 | struct lpfc_vport *vport, |
| 186 | struct lpfc_nodelist *ndlp, |
| 187 | uint32_t lun, |
| 188 | uint32_t old_val, |
| 189 | uint32_t new_val) |
| 190 | { |
| 191 | struct lpfc_fast_path_event *fast_path_evt; |
| 192 | unsigned long flags; |
| 193 | |
| 194 | fast_path_evt = lpfc_alloc_fast_evt(phba); |
| 195 | if (!fast_path_evt) |
| 196 | return; |
| 197 | |
| 198 | fast_path_evt->un.queue_depth_evt.scsi_event.event_type = |
| 199 | FC_REG_SCSI_EVENT; |
| 200 | fast_path_evt->un.queue_depth_evt.scsi_event.subcategory = |
| 201 | LPFC_EVENT_VARQUEDEPTH; |
| 202 | |
| 203 | /* Report all luns with change in queue depth */ |
| 204 | fast_path_evt->un.queue_depth_evt.scsi_event.lun = lun; |
| 205 | if (ndlp && NLP_CHK_NODE_ACT(ndlp)) { |
| 206 | memcpy(&fast_path_evt->un.queue_depth_evt.scsi_event.wwpn, |
| 207 | &ndlp->nlp_portname, sizeof(struct lpfc_name)); |
| 208 | memcpy(&fast_path_evt->un.queue_depth_evt.scsi_event.wwnn, |
| 209 | &ndlp->nlp_nodename, sizeof(struct lpfc_name)); |
| 210 | } |
| 211 | |
| 212 | fast_path_evt->un.queue_depth_evt.oldval = old_val; |
| 213 | fast_path_evt->un.queue_depth_evt.newval = new_val; |
| 214 | fast_path_evt->vport = vport; |
| 215 | |
| 216 | fast_path_evt->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT; |
| 217 | spin_lock_irqsave(&phba->hbalock, flags); |
| 218 | list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list); |
| 219 | spin_unlock_irqrestore(&phba->hbalock, flags); |
| 220 | lpfc_worker_wake_up(phba); |
| 221 | |
| 222 | return; |
| 223 | } |
| 224 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 225 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 226 | * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 227 | * @phba: The Hba for which this call is being executed. |
| 228 | * |
| 229 | * This routine is called when there is resource error in driver or firmware. |
| 230 | * This routine posts WORKER_RAMP_DOWN_QUEUE event for @phba. This routine |
| 231 | * posts at most 1 event each second. This routine wakes up worker thread of |
| 232 | * @phba to process WORKER_RAM_DOWN_EVENT event. |
| 233 | * |
| 234 | * This routine should be called with no lock held. |
| 235 | **/ |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 236 | void |
James Smart | eaf15d5 | 2008-12-04 22:39:29 -0500 | [diff] [blame] | 237 | lpfc_rampdown_queue_depth(struct lpfc_hba *phba) |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 238 | { |
| 239 | unsigned long flags; |
James Smart | 5e9d9b8 | 2008-06-14 22:52:53 -0400 | [diff] [blame] | 240 | uint32_t evt_posted; |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 241 | |
| 242 | spin_lock_irqsave(&phba->hbalock, flags); |
| 243 | atomic_inc(&phba->num_rsrc_err); |
| 244 | phba->last_rsrc_error_time = jiffies; |
| 245 | |
| 246 | if ((phba->last_ramp_down_time + QUEUE_RAMP_DOWN_INTERVAL) > jiffies) { |
| 247 | spin_unlock_irqrestore(&phba->hbalock, flags); |
| 248 | return; |
| 249 | } |
| 250 | |
| 251 | phba->last_ramp_down_time = jiffies; |
| 252 | |
| 253 | spin_unlock_irqrestore(&phba->hbalock, flags); |
| 254 | |
| 255 | spin_lock_irqsave(&phba->pport->work_port_lock, flags); |
James Smart | 5e9d9b8 | 2008-06-14 22:52:53 -0400 | [diff] [blame] | 256 | evt_posted = phba->pport->work_port_events & WORKER_RAMP_DOWN_QUEUE; |
| 257 | if (!evt_posted) |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 258 | phba->pport->work_port_events |= WORKER_RAMP_DOWN_QUEUE; |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 259 | spin_unlock_irqrestore(&phba->pport->work_port_lock, flags); |
| 260 | |
James Smart | 5e9d9b8 | 2008-06-14 22:52:53 -0400 | [diff] [blame] | 261 | if (!evt_posted) |
| 262 | lpfc_worker_wake_up(phba); |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 263 | return; |
| 264 | } |
| 265 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 266 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 267 | * lpfc_rampup_queue_depth - Post RAMP_UP_QUEUE event for worker thread |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 268 | * @phba: The Hba for which this call is being executed. |
| 269 | * |
| 270 | * This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine |
| 271 | * post at most 1 event every 5 minute after last_ramp_up_time or |
| 272 | * last_rsrc_error_time. This routine wakes up worker thread of @phba |
| 273 | * to process WORKER_RAM_DOWN_EVENT event. |
| 274 | * |
| 275 | * This routine should be called with no lock held. |
| 276 | **/ |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 277 | static inline void |
James Smart | 3de2a65 | 2007-08-02 11:09:59 -0400 | [diff] [blame] | 278 | lpfc_rampup_queue_depth(struct lpfc_vport *vport, |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 279 | uint32_t queue_depth) |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 280 | { |
| 281 | unsigned long flags; |
James Smart | 3de2a65 | 2007-08-02 11:09:59 -0400 | [diff] [blame] | 282 | struct lpfc_hba *phba = vport->phba; |
James Smart | 5e9d9b8 | 2008-06-14 22:52:53 -0400 | [diff] [blame] | 283 | uint32_t evt_posted; |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 284 | atomic_inc(&phba->num_cmd_success); |
| 285 | |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 286 | if (vport->cfg_lun_queue_depth <= queue_depth) |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 287 | return; |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 288 | spin_lock_irqsave(&phba->hbalock, flags); |
| 289 | if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) || |
| 290 | ((phba->last_rsrc_error_time + QUEUE_RAMP_UP_INTERVAL ) > jiffies)) { |
| 291 | spin_unlock_irqrestore(&phba->hbalock, flags); |
| 292 | return; |
| 293 | } |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 294 | phba->last_ramp_up_time = jiffies; |
| 295 | spin_unlock_irqrestore(&phba->hbalock, flags); |
| 296 | |
| 297 | spin_lock_irqsave(&phba->pport->work_port_lock, flags); |
James Smart | 5e9d9b8 | 2008-06-14 22:52:53 -0400 | [diff] [blame] | 298 | evt_posted = phba->pport->work_port_events & WORKER_RAMP_UP_QUEUE; |
| 299 | if (!evt_posted) |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 300 | phba->pport->work_port_events |= WORKER_RAMP_UP_QUEUE; |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 301 | spin_unlock_irqrestore(&phba->pport->work_port_lock, flags); |
| 302 | |
James Smart | 5e9d9b8 | 2008-06-14 22:52:53 -0400 | [diff] [blame] | 303 | if (!evt_posted) |
| 304 | lpfc_worker_wake_up(phba); |
| 305 | return; |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 306 | } |
| 307 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 308 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 309 | * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 310 | * @phba: The Hba for which this call is being executed. |
| 311 | * |
| 312 | * This routine is called to process WORKER_RAMP_DOWN_QUEUE event for worker |
| 313 | * thread.This routine reduces queue depth for all scsi device on each vport |
| 314 | * associated with @phba. |
| 315 | **/ |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 316 | void |
| 317 | lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) |
| 318 | { |
James Smart | 549e55c | 2007-08-02 11:09:51 -0400 | [diff] [blame] | 319 | struct lpfc_vport **vports; |
| 320 | struct Scsi_Host *shost; |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 321 | struct scsi_device *sdev; |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 322 | unsigned long new_queue_depth, old_queue_depth; |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 323 | unsigned long num_rsrc_err, num_cmd_success; |
James Smart | 549e55c | 2007-08-02 11:09:51 -0400 | [diff] [blame] | 324 | int i; |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 325 | struct lpfc_rport_data *rdata; |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 326 | |
| 327 | num_rsrc_err = atomic_read(&phba->num_rsrc_err); |
| 328 | num_cmd_success = atomic_read(&phba->num_cmd_success); |
| 329 | |
James Smart | 549e55c | 2007-08-02 11:09:51 -0400 | [diff] [blame] | 330 | vports = lpfc_create_vport_work_array(phba); |
| 331 | if (vports != NULL) |
James Smart | 0937282 | 2008-01-11 01:52:54 -0500 | [diff] [blame] | 332 | for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { |
James Smart | 549e55c | 2007-08-02 11:09:51 -0400 | [diff] [blame] | 333 | shost = lpfc_shost_from_vport(vports[i]); |
| 334 | shost_for_each_device(sdev, shost) { |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 335 | new_queue_depth = |
James Smart | 549e55c | 2007-08-02 11:09:51 -0400 | [diff] [blame] | 336 | sdev->queue_depth * num_rsrc_err / |
| 337 | (num_rsrc_err + num_cmd_success); |
| 338 | if (!new_queue_depth) |
| 339 | new_queue_depth = sdev->queue_depth - 1; |
| 340 | else |
| 341 | new_queue_depth = sdev->queue_depth - |
| 342 | new_queue_depth; |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 343 | old_queue_depth = sdev->queue_depth; |
James Smart | 549e55c | 2007-08-02 11:09:51 -0400 | [diff] [blame] | 344 | if (sdev->ordered_tags) |
| 345 | scsi_adjust_queue_depth(sdev, |
| 346 | MSG_ORDERED_TAG, |
| 347 | new_queue_depth); |
| 348 | else |
| 349 | scsi_adjust_queue_depth(sdev, |
| 350 | MSG_SIMPLE_TAG, |
| 351 | new_queue_depth); |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 352 | rdata = sdev->hostdata; |
| 353 | if (rdata) |
| 354 | lpfc_send_sdev_queuedepth_change_event( |
| 355 | phba, vports[i], |
| 356 | rdata->pnode, |
| 357 | sdev->lun, old_queue_depth, |
| 358 | new_queue_depth); |
James Smart | 549e55c | 2007-08-02 11:09:51 -0400 | [diff] [blame] | 359 | } |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 360 | } |
James Smart | 0937282 | 2008-01-11 01:52:54 -0500 | [diff] [blame] | 361 | lpfc_destroy_vport_work_array(phba, vports); |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 362 | atomic_set(&phba->num_rsrc_err, 0); |
| 363 | atomic_set(&phba->num_cmd_success, 0); |
| 364 | } |
| 365 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 366 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 367 | * lpfc_ramp_up_queue_handler - WORKER_RAMP_UP_QUEUE event handler |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 368 | * @phba: The Hba for which this call is being executed. |
| 369 | * |
| 370 | * This routine is called to process WORKER_RAMP_UP_QUEUE event for worker |
| 371 | * thread.This routine increases queue depth for all scsi device on each vport |
| 372 | * associated with @phba by 1. This routine also sets @phba num_rsrc_err and |
| 373 | * num_cmd_success to zero. |
| 374 | **/ |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 375 | void |
| 376 | lpfc_ramp_up_queue_handler(struct lpfc_hba *phba) |
| 377 | { |
James Smart | 549e55c | 2007-08-02 11:09:51 -0400 | [diff] [blame] | 378 | struct lpfc_vport **vports; |
| 379 | struct Scsi_Host *shost; |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 380 | struct scsi_device *sdev; |
James Smart | 549e55c | 2007-08-02 11:09:51 -0400 | [diff] [blame] | 381 | int i; |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 382 | struct lpfc_rport_data *rdata; |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 383 | |
James Smart | 549e55c | 2007-08-02 11:09:51 -0400 | [diff] [blame] | 384 | vports = lpfc_create_vport_work_array(phba); |
| 385 | if (vports != NULL) |
James Smart | 0937282 | 2008-01-11 01:52:54 -0500 | [diff] [blame] | 386 | for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { |
James Smart | 549e55c | 2007-08-02 11:09:51 -0400 | [diff] [blame] | 387 | shost = lpfc_shost_from_vport(vports[i]); |
| 388 | shost_for_each_device(sdev, shost) { |
James Smart | 97eab63 | 2008-04-07 10:16:05 -0400 | [diff] [blame] | 389 | if (vports[i]->cfg_lun_queue_depth <= |
| 390 | sdev->queue_depth) |
| 391 | continue; |
James Smart | 549e55c | 2007-08-02 11:09:51 -0400 | [diff] [blame] | 392 | if (sdev->ordered_tags) |
| 393 | scsi_adjust_queue_depth(sdev, |
| 394 | MSG_ORDERED_TAG, |
| 395 | sdev->queue_depth+1); |
| 396 | else |
| 397 | scsi_adjust_queue_depth(sdev, |
| 398 | MSG_SIMPLE_TAG, |
| 399 | sdev->queue_depth+1); |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 400 | rdata = sdev->hostdata; |
| 401 | if (rdata) |
| 402 | lpfc_send_sdev_queuedepth_change_event( |
| 403 | phba, vports[i], |
| 404 | rdata->pnode, |
| 405 | sdev->lun, |
| 406 | sdev->queue_depth - 1, |
| 407 | sdev->queue_depth); |
James Smart | 549e55c | 2007-08-02 11:09:51 -0400 | [diff] [blame] | 408 | } |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 409 | } |
James Smart | 0937282 | 2008-01-11 01:52:54 -0500 | [diff] [blame] | 410 | lpfc_destroy_vport_work_array(phba, vports); |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 411 | atomic_set(&phba->num_rsrc_err, 0); |
| 412 | atomic_set(&phba->num_cmd_success, 0); |
| 413 | } |
| 414 | |
James Smart | a8e497d | 2008-08-24 21:50:11 -0400 | [diff] [blame] | 415 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 416 | * lpfc_scsi_dev_block - set all scsi hosts to block state |
James Smart | a8e497d | 2008-08-24 21:50:11 -0400 | [diff] [blame] | 417 | * @phba: Pointer to HBA context object. |
| 418 | * |
| 419 | * This function walks vport list and set each SCSI host to block state |
| 420 | * by invoking fc_remote_port_delete() routine. This function is invoked |
| 421 | * with EEH when device's PCI slot has been permanently disabled. |
| 422 | **/ |
| 423 | void |
| 424 | lpfc_scsi_dev_block(struct lpfc_hba *phba) |
| 425 | { |
| 426 | struct lpfc_vport **vports; |
| 427 | struct Scsi_Host *shost; |
| 428 | struct scsi_device *sdev; |
| 429 | struct fc_rport *rport; |
| 430 | int i; |
| 431 | |
| 432 | vports = lpfc_create_vport_work_array(phba); |
| 433 | if (vports != NULL) |
| 434 | for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { |
| 435 | shost = lpfc_shost_from_vport(vports[i]); |
| 436 | shost_for_each_device(sdev, shost) { |
| 437 | rport = starget_to_rport(scsi_target(sdev)); |
| 438 | fc_remote_port_delete(rport); |
| 439 | } |
| 440 | } |
| 441 | lpfc_destroy_vport_work_array(phba, vports); |
| 442 | } |
| 443 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 444 | /** |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 445 | * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 446 | * @vport: The virtual port for which this call being executed. |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 447 | * @num_to_allocate: The requested number of buffers to allocate. |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 448 | * |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 449 | * This routine allocates a scsi buffer for device with SLI-3 interface spec, |
| 450 | * the scsi buffer contains all the necessary information needed to initiate |
| 451 | * a SCSI I/O. The non-DMAable buffer region contains information to build |
| 452 | * the IOCB. The DMAable region contains memory for the FCP CMND, FCP RSP, |
| 453 | * and the initial BPL. In addition to allocating memory, the FCP CMND and |
| 454 | * FCP RSP BDEs are setup in the BPL and the BPL BDE is setup in the IOCB. |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 455 | * |
| 456 | * Return codes: |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 457 | * int - number of scsi buffers that were allocated. |
| 458 | * 0 = failure, less than num_to_alloc is a partial failure. |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 459 | **/ |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 460 | static int |
| 461 | lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc) |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 462 | { |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 463 | struct lpfc_hba *phba = vport->phba; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 464 | struct lpfc_scsi_buf *psb; |
| 465 | struct ulp_bde64 *bpl; |
| 466 | IOCB_t *iocb; |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 467 | dma_addr_t pdma_phys_fcp_cmd; |
| 468 | dma_addr_t pdma_phys_fcp_rsp; |
| 469 | dma_addr_t pdma_phys_bpl; |
James Bottomley | 604a3e3 | 2005-10-29 10:28:33 -0500 | [diff] [blame] | 470 | uint16_t iotag; |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 471 | int bcnt; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 472 | |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 473 | for (bcnt = 0; bcnt < num_to_alloc; bcnt++) { |
| 474 | psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL); |
| 475 | if (!psb) |
| 476 | break; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 477 | |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 478 | /* |
| 479 | * Get memory from the pci pool to map the virt space to pci |
| 480 | * bus space for an I/O. The DMA buffer includes space for the |
| 481 | * struct fcp_cmnd, struct fcp_rsp and the number of bde's |
| 482 | * necessary to support the sg_tablesize. |
| 483 | */ |
| 484 | psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, |
| 485 | GFP_KERNEL, &psb->dma_handle); |
| 486 | if (!psb->data) { |
| 487 | kfree(psb); |
| 488 | break; |
| 489 | } |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 490 | |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 491 | /* Initialize virtual ptrs to dma_buf region. */ |
| 492 | memset(psb->data, 0, phba->cfg_sg_dma_buf_size); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 493 | |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 494 | /* Allocate iotag for psb->cur_iocbq. */ |
| 495 | iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq); |
| 496 | if (iotag == 0) { |
| 497 | pci_pool_free(phba->lpfc_scsi_dma_buf_pool, |
| 498 | psb->data, psb->dma_handle); |
| 499 | kfree(psb); |
| 500 | break; |
| 501 | } |
| 502 | psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP; |
James Bottomley | 604a3e3 | 2005-10-29 10:28:33 -0500 | [diff] [blame] | 503 | |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 504 | psb->fcp_cmnd = psb->data; |
| 505 | psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd); |
| 506 | psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) + |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 507 | sizeof(struct fcp_rsp); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 508 | |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 509 | /* Initialize local short-hand pointers. */ |
| 510 | bpl = psb->fcp_bpl; |
| 511 | pdma_phys_fcp_cmd = psb->dma_handle; |
| 512 | pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd); |
| 513 | pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) + |
| 514 | sizeof(struct fcp_rsp); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 515 | |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 516 | /* |
| 517 | * The first two bdes are the FCP_CMD and FCP_RSP. The balance |
| 518 | * are sg list bdes. Initialize the first two and leave the |
| 519 | * rest for queuecommand. |
| 520 | */ |
| 521 | bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd)); |
| 522 | bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd)); |
| 523 | bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd); |
| 524 | bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64; |
| 525 | bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 526 | |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 527 | /* Setup the physical region for the FCP RSP */ |
| 528 | bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp)); |
| 529 | bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp)); |
| 530 | bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp); |
| 531 | bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64; |
| 532 | bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w); |
| 533 | |
| 534 | /* |
| 535 | * Since the IOCB for the FCP I/O is built into this |
| 536 | * lpfc_scsi_buf, initialize it with all known data now. |
| 537 | */ |
| 538 | iocb = &psb->cur_iocbq.iocb; |
| 539 | iocb->un.fcpi64.bdl.ulpIoTag32 = 0; |
| 540 | if ((phba->sli_rev == 3) && |
| 541 | !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) { |
| 542 | /* fill in immediate fcp command BDE */ |
| 543 | iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED; |
| 544 | iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd); |
| 545 | iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t, |
| 546 | unsli3.fcp_ext.icd); |
| 547 | iocb->un.fcpi64.bdl.addrHigh = 0; |
| 548 | iocb->ulpBdeCount = 0; |
| 549 | iocb->ulpLe = 0; |
| 550 | /* fill in responce BDE */ |
| 551 | iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = |
| 552 | BUFF_TYPE_BDE_64; |
| 553 | iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize = |
| 554 | sizeof(struct fcp_rsp); |
| 555 | iocb->unsli3.fcp_ext.rbde.addrLow = |
| 556 | putPaddrLow(pdma_phys_fcp_rsp); |
| 557 | iocb->unsli3.fcp_ext.rbde.addrHigh = |
| 558 | putPaddrHigh(pdma_phys_fcp_rsp); |
| 559 | } else { |
| 560 | iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64; |
| 561 | iocb->un.fcpi64.bdl.bdeSize = |
| 562 | (2 * sizeof(struct ulp_bde64)); |
| 563 | iocb->un.fcpi64.bdl.addrLow = |
| 564 | putPaddrLow(pdma_phys_bpl); |
| 565 | iocb->un.fcpi64.bdl.addrHigh = |
| 566 | putPaddrHigh(pdma_phys_bpl); |
| 567 | iocb->ulpBdeCount = 1; |
| 568 | iocb->ulpLe = 1; |
| 569 | } |
| 570 | iocb->ulpClass = CLASS3; |
| 571 | psb->status = IOSTAT_SUCCESS; |
James Smart | da0436e | 2009-05-22 14:51:39 -0400 | [diff] [blame] | 572 | /* Put it back into the SCSI buffer list */ |
| 573 | lpfc_release_scsi_buf_s4(phba, psb); |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 574 | |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 575 | } |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 576 | |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 577 | return bcnt; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 578 | } |
| 579 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 580 | /** |
James Smart | da0436e | 2009-05-22 14:51:39 -0400 | [diff] [blame] | 581 | * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort |
| 582 | * @phba: pointer to lpfc hba data structure. |
| 583 | * @axri: pointer to the fcp xri abort wcqe structure. |
| 584 | * |
| 585 | * This routine is invoked by the worker thread to process a SLI4 fast-path |
| 586 | * FCP aborted xri. |
| 587 | **/ |
| 588 | void |
| 589 | lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba, |
| 590 | struct sli4_wcqe_xri_aborted *axri) |
| 591 | { |
| 592 | uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri); |
| 593 | struct lpfc_scsi_buf *psb, *next_psb; |
| 594 | unsigned long iflag = 0; |
| 595 | |
| 596 | spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag); |
| 597 | list_for_each_entry_safe(psb, next_psb, |
| 598 | &phba->sli4_hba.lpfc_abts_scsi_buf_list, list) { |
| 599 | if (psb->cur_iocbq.sli4_xritag == xri) { |
| 600 | list_del(&psb->list); |
| 601 | psb->status = IOSTAT_SUCCESS; |
| 602 | spin_unlock_irqrestore( |
| 603 | &phba->sli4_hba.abts_scsi_buf_list_lock, |
| 604 | iflag); |
| 605 | lpfc_release_scsi_buf_s4(phba, psb); |
| 606 | return; |
| 607 | } |
| 608 | } |
| 609 | spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock, |
| 610 | iflag); |
| 611 | } |
| 612 | |
| 613 | /** |
| 614 | * lpfc_sli4_repost_scsi_sgl_list - Repsot the Scsi buffers sgl pages as block |
| 615 | * @phba: pointer to lpfc hba data structure. |
| 616 | * |
| 617 | * This routine walks the list of scsi buffers that have been allocated and |
| 618 | * repost them to the HBA by using SGL block post. This is needed after a |
| 619 | * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine |
| 620 | * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list |
| 621 | * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers. |
| 622 | * |
| 623 | * Returns: 0 = success, non-zero failure. |
| 624 | **/ |
| 625 | int |
| 626 | lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba) |
| 627 | { |
| 628 | struct lpfc_scsi_buf *psb; |
| 629 | int index, status, bcnt = 0, rcnt = 0, rc = 0; |
| 630 | LIST_HEAD(sblist); |
| 631 | |
| 632 | for (index = 0; index < phba->sli4_hba.scsi_xri_cnt; index++) { |
| 633 | psb = phba->sli4_hba.lpfc_scsi_psb_array[index]; |
| 634 | if (psb) { |
| 635 | /* Remove from SCSI buffer list */ |
| 636 | list_del(&psb->list); |
| 637 | /* Add it to a local SCSI buffer list */ |
| 638 | list_add_tail(&psb->list, &sblist); |
| 639 | if (++rcnt == LPFC_NEMBED_MBOX_SGL_CNT) { |
| 640 | bcnt = rcnt; |
| 641 | rcnt = 0; |
| 642 | } |
| 643 | } else |
| 644 | /* A hole present in the XRI array, need to skip */ |
| 645 | bcnt = rcnt; |
| 646 | |
| 647 | if (index == phba->sli4_hba.scsi_xri_cnt - 1) |
| 648 | /* End of XRI array for SCSI buffer, complete */ |
| 649 | bcnt = rcnt; |
| 650 | |
| 651 | /* Continue until collect up to a nembed page worth of sgls */ |
| 652 | if (bcnt == 0) |
| 653 | continue; |
| 654 | /* Now, post the SCSI buffer list sgls as a block */ |
| 655 | status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt); |
| 656 | /* Reset SCSI buffer count for next round of posting */ |
| 657 | bcnt = 0; |
| 658 | while (!list_empty(&sblist)) { |
| 659 | list_remove_head(&sblist, psb, struct lpfc_scsi_buf, |
| 660 | list); |
| 661 | if (status) { |
| 662 | /* Put this back on the abort scsi list */ |
| 663 | psb->status = IOSTAT_LOCAL_REJECT; |
| 664 | psb->result = IOERR_ABORT_REQUESTED; |
| 665 | rc++; |
| 666 | } else |
| 667 | psb->status = IOSTAT_SUCCESS; |
| 668 | /* Put it back into the SCSI buffer list */ |
| 669 | lpfc_release_scsi_buf_s4(phba, psb); |
| 670 | } |
| 671 | } |
| 672 | return rc; |
| 673 | } |
| 674 | |
| 675 | /** |
| 676 | * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec |
| 677 | * @vport: The virtual port for which this call being executed. |
| 678 | * @num_to_allocate: The requested number of buffers to allocate. |
| 679 | * |
| 680 | * This routine allocates a scsi buffer for device with SLI-4 interface spec, |
| 681 | * the scsi buffer contains all the necessary information needed to initiate |
| 682 | * a SCSI I/O. |
| 683 | * |
| 684 | * Return codes: |
| 685 | * int - number of scsi buffers that were allocated. |
| 686 | * 0 = failure, less than num_to_alloc is a partial failure. |
| 687 | **/ |
| 688 | static int |
| 689 | lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) |
| 690 | { |
| 691 | struct lpfc_hba *phba = vport->phba; |
| 692 | struct lpfc_scsi_buf *psb; |
| 693 | struct sli4_sge *sgl; |
| 694 | IOCB_t *iocb; |
| 695 | dma_addr_t pdma_phys_fcp_cmd; |
| 696 | dma_addr_t pdma_phys_fcp_rsp; |
| 697 | dma_addr_t pdma_phys_bpl, pdma_phys_bpl1; |
| 698 | uint16_t iotag, last_xritag = NO_XRI; |
| 699 | int status = 0, index; |
| 700 | int bcnt; |
| 701 | int non_sequential_xri = 0; |
| 702 | int rc = 0; |
| 703 | LIST_HEAD(sblist); |
| 704 | |
| 705 | for (bcnt = 0; bcnt < num_to_alloc; bcnt++) { |
| 706 | psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL); |
| 707 | if (!psb) |
| 708 | break; |
| 709 | |
| 710 | /* |
| 711 | * Get memory from the pci pool to map the virt space to pci bus |
| 712 | * space for an I/O. The DMA buffer includes space for the |
| 713 | * struct fcp_cmnd, struct fcp_rsp and the number of bde's |
| 714 | * necessary to support the sg_tablesize. |
| 715 | */ |
| 716 | psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, |
| 717 | GFP_KERNEL, &psb->dma_handle); |
| 718 | if (!psb->data) { |
| 719 | kfree(psb); |
| 720 | break; |
| 721 | } |
| 722 | |
| 723 | /* Initialize virtual ptrs to dma_buf region. */ |
| 724 | memset(psb->data, 0, phba->cfg_sg_dma_buf_size); |
| 725 | |
| 726 | /* Allocate iotag for psb->cur_iocbq. */ |
| 727 | iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq); |
| 728 | if (iotag == 0) { |
| 729 | kfree(psb); |
| 730 | break; |
| 731 | } |
| 732 | |
| 733 | psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba); |
| 734 | if (psb->cur_iocbq.sli4_xritag == NO_XRI) { |
| 735 | pci_pool_free(phba->lpfc_scsi_dma_buf_pool, |
| 736 | psb->data, psb->dma_handle); |
| 737 | kfree(psb); |
| 738 | break; |
| 739 | } |
| 740 | if (last_xritag != NO_XRI |
| 741 | && psb->cur_iocbq.sli4_xritag != (last_xritag+1)) { |
| 742 | non_sequential_xri = 1; |
| 743 | } else |
| 744 | list_add_tail(&psb->list, &sblist); |
| 745 | last_xritag = psb->cur_iocbq.sli4_xritag; |
| 746 | |
| 747 | index = phba->sli4_hba.scsi_xri_cnt++; |
| 748 | psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP; |
| 749 | |
| 750 | psb->fcp_bpl = psb->data; |
| 751 | psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size) |
| 752 | - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); |
| 753 | psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd + |
| 754 | sizeof(struct fcp_cmnd)); |
| 755 | |
| 756 | /* Initialize local short-hand pointers. */ |
| 757 | sgl = (struct sli4_sge *)psb->fcp_bpl; |
| 758 | pdma_phys_bpl = psb->dma_handle; |
| 759 | pdma_phys_fcp_cmd = |
| 760 | (psb->dma_handle + phba->cfg_sg_dma_buf_size) |
| 761 | - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); |
| 762 | pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd); |
| 763 | |
| 764 | /* |
| 765 | * The first two bdes are the FCP_CMD and FCP_RSP. The balance |
| 766 | * are sg list bdes. Initialize the first two and leave the |
| 767 | * rest for queuecommand. |
| 768 | */ |
| 769 | sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd)); |
| 770 | sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd)); |
| 771 | bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_cmnd)); |
| 772 | bf_set(lpfc_sli4_sge_last, sgl, 0); |
| 773 | sgl->word2 = cpu_to_le32(sgl->word2); |
| 774 | sgl->word3 = cpu_to_le32(sgl->word3); |
| 775 | sgl++; |
| 776 | |
| 777 | /* Setup the physical region for the FCP RSP */ |
| 778 | sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp)); |
| 779 | sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp)); |
| 780 | bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_rsp)); |
| 781 | bf_set(lpfc_sli4_sge_last, sgl, 1); |
| 782 | sgl->word2 = cpu_to_le32(sgl->word2); |
| 783 | sgl->word3 = cpu_to_le32(sgl->word3); |
| 784 | |
| 785 | /* |
| 786 | * Since the IOCB for the FCP I/O is built into this |
| 787 | * lpfc_scsi_buf, initialize it with all known data now. |
| 788 | */ |
| 789 | iocb = &psb->cur_iocbq.iocb; |
| 790 | iocb->un.fcpi64.bdl.ulpIoTag32 = 0; |
| 791 | iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64; |
| 792 | /* setting the BLP size to 2 * sizeof BDE may not be correct. |
| 793 | * We are setting the bpl to point to out sgl. An sgl's |
| 794 | * entries are 16 bytes, a bpl entries are 12 bytes. |
| 795 | */ |
| 796 | iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd); |
| 797 | iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd); |
| 798 | iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd); |
| 799 | iocb->ulpBdeCount = 1; |
| 800 | iocb->ulpLe = 1; |
| 801 | iocb->ulpClass = CLASS3; |
| 802 | if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE) |
| 803 | pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE; |
| 804 | else |
| 805 | pdma_phys_bpl1 = 0; |
| 806 | psb->dma_phys_bpl = pdma_phys_bpl; |
| 807 | phba->sli4_hba.lpfc_scsi_psb_array[index] = psb; |
| 808 | if (non_sequential_xri) { |
| 809 | status = lpfc_sli4_post_sgl(phba, pdma_phys_bpl, |
| 810 | pdma_phys_bpl1, |
| 811 | psb->cur_iocbq.sli4_xritag); |
| 812 | if (status) { |
| 813 | /* Put this back on the abort scsi list */ |
| 814 | psb->status = IOSTAT_LOCAL_REJECT; |
| 815 | psb->result = IOERR_ABORT_REQUESTED; |
| 816 | rc++; |
| 817 | } else |
| 818 | psb->status = IOSTAT_SUCCESS; |
| 819 | /* Put it back into the SCSI buffer list */ |
| 820 | lpfc_release_scsi_buf_s4(phba, psb); |
| 821 | break; |
| 822 | } |
| 823 | } |
| 824 | if (bcnt) { |
| 825 | status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt); |
| 826 | /* Reset SCSI buffer count for next round of posting */ |
| 827 | while (!list_empty(&sblist)) { |
| 828 | list_remove_head(&sblist, psb, struct lpfc_scsi_buf, |
| 829 | list); |
| 830 | if (status) { |
| 831 | /* Put this back on the abort scsi list */ |
| 832 | psb->status = IOSTAT_LOCAL_REJECT; |
| 833 | psb->result = IOERR_ABORT_REQUESTED; |
| 834 | rc++; |
| 835 | } else |
| 836 | psb->status = IOSTAT_SUCCESS; |
| 837 | /* Put it back into the SCSI buffer list */ |
| 838 | lpfc_release_scsi_buf_s4(phba, psb); |
| 839 | } |
| 840 | } |
| 841 | |
| 842 | return bcnt + non_sequential_xri - rc; |
| 843 | } |
| 844 | |
| 845 | /** |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 846 | * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator |
| 847 | * @vport: The virtual port for which this call being executed. |
| 848 | * @num_to_allocate: The requested number of buffers to allocate. |
| 849 | * |
| 850 | * This routine wraps the actual SCSI buffer allocator function pointer from |
| 851 | * the lpfc_hba struct. |
| 852 | * |
| 853 | * Return codes: |
| 854 | * int - number of scsi buffers that were allocated. |
| 855 | * 0 = failure, less than num_to_alloc is a partial failure. |
| 856 | **/ |
| 857 | static inline int |
| 858 | lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc) |
| 859 | { |
| 860 | return vport->phba->lpfc_new_scsi_buf(vport, num_to_alloc); |
| 861 | } |
| 862 | |
| 863 | /** |
| 864 | * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA |
| 865 | * @phba: The HBA for which this call is being executed. |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 866 | * |
| 867 | * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list |
| 868 | * and returns to caller. |
| 869 | * |
| 870 | * Return codes: |
| 871 | * NULL - Error |
| 872 | * Pointer to lpfc_scsi_buf - Success |
| 873 | **/ |
Adrian Bunk | 455c53e | 2006-01-06 20:21:28 +0100 | [diff] [blame] | 874 | static struct lpfc_scsi_buf* |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 875 | lpfc_get_scsi_buf(struct lpfc_hba * phba) |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 876 | { |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 877 | struct lpfc_scsi_buf * lpfc_cmd = NULL; |
| 878 | struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list; |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 879 | unsigned long iflag = 0; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 880 | |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 881 | spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 882 | list_remove_head(scsi_buf_list, lpfc_cmd, struct lpfc_scsi_buf, list); |
James Smart | 1dcb58e | 2007-04-25 09:51:30 -0400 | [diff] [blame] | 883 | if (lpfc_cmd) { |
| 884 | lpfc_cmd->seg_cnt = 0; |
| 885 | lpfc_cmd->nonsg_phys = 0; |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 886 | lpfc_cmd->prot_seg_cnt = 0; |
James Smart | 1dcb58e | 2007-04-25 09:51:30 -0400 | [diff] [blame] | 887 | } |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 888 | spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag); |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 889 | return lpfc_cmd; |
| 890 | } |
| 891 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 892 | /** |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 893 | * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 894 | * @phba: The Hba for which this call is being executed. |
| 895 | * @psb: The scsi buffer which is being released. |
| 896 | * |
| 897 | * This routine releases @psb scsi buffer by adding it to tail of @phba |
| 898 | * lpfc_scsi_buf_list list. |
| 899 | **/ |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 900 | static void |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 901 | lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 902 | { |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 903 | unsigned long iflag = 0; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 904 | |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 905 | spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 906 | psb->pCmd = NULL; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 907 | list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list); |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 908 | spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 909 | } |
| 910 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 911 | /** |
James Smart | da0436e | 2009-05-22 14:51:39 -0400 | [diff] [blame] | 912 | * lpfc_release_scsi_buf_s4: Return a scsi buffer back to hba scsi buf list. |
| 913 | * @phba: The Hba for which this call is being executed. |
| 914 | * @psb: The scsi buffer which is being released. |
| 915 | * |
| 916 | * This routine releases @psb scsi buffer by adding it to tail of @phba |
| 917 | * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer |
| 918 | * and cannot be reused for at least RA_TOV amount of time if it was |
| 919 | * aborted. |
| 920 | **/ |
| 921 | static void |
| 922 | lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) |
| 923 | { |
| 924 | unsigned long iflag = 0; |
| 925 | |
| 926 | if (psb->status == IOSTAT_LOCAL_REJECT |
| 927 | && psb->result == IOERR_ABORT_REQUESTED) { |
| 928 | spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, |
| 929 | iflag); |
| 930 | psb->pCmd = NULL; |
| 931 | list_add_tail(&psb->list, |
| 932 | &phba->sli4_hba.lpfc_abts_scsi_buf_list); |
| 933 | spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock, |
| 934 | iflag); |
| 935 | } else { |
| 936 | |
| 937 | spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); |
| 938 | psb->pCmd = NULL; |
| 939 | list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list); |
| 940 | spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag); |
| 941 | } |
| 942 | } |
| 943 | |
| 944 | /** |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 945 | * lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list. |
| 946 | * @phba: The Hba for which this call is being executed. |
| 947 | * @psb: The scsi buffer which is being released. |
| 948 | * |
| 949 | * This routine releases @psb scsi buffer by adding it to tail of @phba |
| 950 | * lpfc_scsi_buf_list list. |
| 951 | **/ |
| 952 | static void |
| 953 | lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) |
| 954 | { |
| 955 | |
| 956 | phba->lpfc_release_scsi_buf(phba, psb); |
| 957 | } |
| 958 | |
| 959 | /** |
| 960 | * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 961 | * @phba: The Hba for which this call is being executed. |
| 962 | * @lpfc_cmd: The scsi buffer which is going to be mapped. |
| 963 | * |
| 964 | * This routine does the pci dma mapping for scatter-gather list of scsi cmnd |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 965 | * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans |
| 966 | * through sg elements and format the bdea. This routine also initializes all |
| 967 | * IOCB fields which are dependent on scsi command request buffer. |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 968 | * |
| 969 | * Return codes: |
| 970 | * 1 - Error |
| 971 | * 0 - Success |
| 972 | **/ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 973 | static int |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 974 | lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 975 | { |
| 976 | struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd; |
| 977 | struct scatterlist *sgel = NULL; |
| 978 | struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd; |
| 979 | struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl; |
| 980 | IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb; |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 981 | struct ulp_bde64 *data_bde = iocb_cmd->unsli3.fcp_ext.dbde; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 982 | dma_addr_t physaddr; |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 983 | uint32_t num_bde = 0; |
FUJITA Tomonori | a0b4f78 | 2007-06-17 19:56:39 -0500 | [diff] [blame] | 984 | int nseg, datadir = scsi_cmnd->sc_data_direction; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 985 | |
| 986 | /* |
| 987 | * There are three possibilities here - use scatter-gather segment, use |
| 988 | * the single mapping, or neither. Start the lpfc command prep by |
| 989 | * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first |
| 990 | * data bde entry. |
| 991 | */ |
| 992 | bpl += 2; |
FUJITA Tomonori | c59fd9e | 2007-07-04 06:03:11 -0700 | [diff] [blame] | 993 | if (scsi_sg_count(scsi_cmnd)) { |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 994 | /* |
| 995 | * The driver stores the segment count returned from pci_map_sg |
| 996 | * because this a count of dma-mappings used to map the use_sg |
| 997 | * pages. They are not guaranteed to be the same for those |
| 998 | * architectures that implement an IOMMU. |
| 999 | */ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1000 | |
FUJITA Tomonori | c59fd9e | 2007-07-04 06:03:11 -0700 | [diff] [blame] | 1001 | nseg = dma_map_sg(&phba->pcidev->dev, scsi_sglist(scsi_cmnd), |
| 1002 | scsi_sg_count(scsi_cmnd), datadir); |
| 1003 | if (unlikely(!nseg)) |
| 1004 | return 1; |
| 1005 | |
FUJITA Tomonori | a0b4f78 | 2007-06-17 19:56:39 -0500 | [diff] [blame] | 1006 | lpfc_cmd->seg_cnt = nseg; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1007 | if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) { |
| 1008 | printk(KERN_ERR "%s: Too many sg segments from " |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 1009 | "dma_map_sg. Config %d, seg_cnt %d\n", |
Harvey Harrison | cadbd4a | 2008-07-03 23:47:27 -0700 | [diff] [blame] | 1010 | __func__, phba->cfg_sg_seg_cnt, |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1011 | lpfc_cmd->seg_cnt); |
FUJITA Tomonori | a0b4f78 | 2007-06-17 19:56:39 -0500 | [diff] [blame] | 1012 | scsi_dma_unmap(scsi_cmnd); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1013 | return 1; |
| 1014 | } |
| 1015 | |
| 1016 | /* |
| 1017 | * The driver established a maximum scatter-gather segment count |
| 1018 | * during probe that limits the number of sg elements in any |
| 1019 | * single scsi command. Just run through the seg_cnt and format |
| 1020 | * the bde's. |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 1021 | * When using SLI-3 the driver will try to fit all the BDEs into |
| 1022 | * the IOCB. If it can't then the BDEs get added to a BPL as it |
| 1023 | * does for SLI-2 mode. |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1024 | */ |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 1025 | scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) { |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1026 | physaddr = sg_dma_address(sgel); |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 1027 | if (phba->sli_rev == 3 && |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 1028 | !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) && |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 1029 | nseg <= LPFC_EXT_DATA_BDE_COUNT) { |
| 1030 | data_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64; |
| 1031 | data_bde->tus.f.bdeSize = sg_dma_len(sgel); |
| 1032 | data_bde->addrLow = putPaddrLow(physaddr); |
| 1033 | data_bde->addrHigh = putPaddrHigh(physaddr); |
| 1034 | data_bde++; |
| 1035 | } else { |
| 1036 | bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64; |
| 1037 | bpl->tus.f.bdeSize = sg_dma_len(sgel); |
| 1038 | bpl->tus.w = le32_to_cpu(bpl->tus.w); |
| 1039 | bpl->addrLow = |
| 1040 | le32_to_cpu(putPaddrLow(physaddr)); |
| 1041 | bpl->addrHigh = |
| 1042 | le32_to_cpu(putPaddrHigh(physaddr)); |
| 1043 | bpl++; |
| 1044 | } |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1045 | } |
FUJITA Tomonori | c59fd9e | 2007-07-04 06:03:11 -0700 | [diff] [blame] | 1046 | } |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1047 | |
| 1048 | /* |
| 1049 | * Finish initializing those IOCB fields that are dependent on the |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 1050 | * scsi_cmnd request_buffer. Note that for SLI-2 the bdeSize is |
| 1051 | * explicitly reinitialized and for SLI-3 the extended bde count is |
| 1052 | * explicitly reinitialized since all iocb memory resources are reused. |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1053 | */ |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 1054 | if (phba->sli_rev == 3 && |
| 1055 | !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) { |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 1056 | if (num_bde > LPFC_EXT_DATA_BDE_COUNT) { |
| 1057 | /* |
| 1058 | * The extended IOCB format can only fit 3 BDE or a BPL. |
| 1059 | * This I/O has more than 3 BDE so the 1st data bde will |
| 1060 | * be a BPL that is filled in here. |
| 1061 | */ |
| 1062 | physaddr = lpfc_cmd->dma_handle; |
| 1063 | data_bde->tus.f.bdeFlags = BUFF_TYPE_BLP_64; |
| 1064 | data_bde->tus.f.bdeSize = (num_bde * |
| 1065 | sizeof(struct ulp_bde64)); |
| 1066 | physaddr += (sizeof(struct fcp_cmnd) + |
| 1067 | sizeof(struct fcp_rsp) + |
| 1068 | (2 * sizeof(struct ulp_bde64))); |
| 1069 | data_bde->addrHigh = putPaddrHigh(physaddr); |
| 1070 | data_bde->addrLow = putPaddrLow(physaddr); |
| 1071 | /* ebde count includes the responce bde and data bpl */ |
| 1072 | iocb_cmd->unsli3.fcp_ext.ebde_count = 2; |
| 1073 | } else { |
| 1074 | /* ebde count includes the responce bde and data bdes */ |
| 1075 | iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1); |
| 1076 | } |
| 1077 | } else { |
| 1078 | iocb_cmd->un.fcpi64.bdl.bdeSize = |
| 1079 | ((num_bde + 2) * sizeof(struct ulp_bde64)); |
| 1080 | } |
James Smart | 0937282 | 2008-01-11 01:52:54 -0500 | [diff] [blame] | 1081 | fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd)); |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 1082 | |
| 1083 | /* |
| 1084 | * Due to difference in data length between DIF/non-DIF paths, |
| 1085 | * we need to set word 4 of IOCB here |
| 1086 | */ |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 1087 | iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1088 | return 0; |
| 1089 | } |
| 1090 | |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 1091 | /* |
| 1092 | * Given a scsi cmnd, determine the BlockGuard profile to be used |
| 1093 | * with the cmd |
| 1094 | */ |
| 1095 | static int |
| 1096 | lpfc_sc_to_sli_prof(struct scsi_cmnd *sc) |
| 1097 | { |
| 1098 | uint8_t guard_type = scsi_host_get_guard(sc->device->host); |
| 1099 | uint8_t ret_prof = LPFC_PROF_INVALID; |
| 1100 | |
| 1101 | if (guard_type == SHOST_DIX_GUARD_IP) { |
| 1102 | switch (scsi_get_prot_op(sc)) { |
| 1103 | case SCSI_PROT_READ_INSERT: |
| 1104 | case SCSI_PROT_WRITE_STRIP: |
| 1105 | ret_prof = LPFC_PROF_AST2; |
| 1106 | break; |
| 1107 | |
| 1108 | case SCSI_PROT_READ_STRIP: |
| 1109 | case SCSI_PROT_WRITE_INSERT: |
| 1110 | ret_prof = LPFC_PROF_A1; |
| 1111 | break; |
| 1112 | |
| 1113 | case SCSI_PROT_READ_CONVERT: |
| 1114 | case SCSI_PROT_WRITE_CONVERT: |
| 1115 | ret_prof = LPFC_PROF_AST1; |
| 1116 | break; |
| 1117 | |
| 1118 | case SCSI_PROT_READ_PASS: |
| 1119 | case SCSI_PROT_WRITE_PASS: |
| 1120 | case SCSI_PROT_NORMAL: |
| 1121 | default: |
| 1122 | printk(KERN_ERR "Bad op/guard:%d/%d combination\n", |
| 1123 | scsi_get_prot_op(sc), guard_type); |
| 1124 | break; |
| 1125 | |
| 1126 | } |
| 1127 | } else if (guard_type == SHOST_DIX_GUARD_CRC) { |
| 1128 | switch (scsi_get_prot_op(sc)) { |
| 1129 | case SCSI_PROT_READ_STRIP: |
| 1130 | case SCSI_PROT_WRITE_INSERT: |
| 1131 | ret_prof = LPFC_PROF_A1; |
| 1132 | break; |
| 1133 | |
| 1134 | case SCSI_PROT_READ_PASS: |
| 1135 | case SCSI_PROT_WRITE_PASS: |
| 1136 | ret_prof = LPFC_PROF_C1; |
| 1137 | break; |
| 1138 | |
| 1139 | case SCSI_PROT_READ_CONVERT: |
| 1140 | case SCSI_PROT_WRITE_CONVERT: |
| 1141 | case SCSI_PROT_READ_INSERT: |
| 1142 | case SCSI_PROT_WRITE_STRIP: |
| 1143 | case SCSI_PROT_NORMAL: |
| 1144 | default: |
| 1145 | printk(KERN_ERR "Bad op/guard:%d/%d combination\n", |
| 1146 | scsi_get_prot_op(sc), guard_type); |
| 1147 | break; |
| 1148 | } |
| 1149 | } else { |
| 1150 | /* unsupported format */ |
| 1151 | BUG(); |
| 1152 | } |
| 1153 | |
| 1154 | return ret_prof; |
| 1155 | } |
| 1156 | |
| 1157 | struct scsi_dif_tuple { |
| 1158 | __be16 guard_tag; /* Checksum */ |
| 1159 | __be16 app_tag; /* Opaque storage */ |
| 1160 | __be32 ref_tag; /* Target LBA or indirect LBA */ |
| 1161 | }; |
| 1162 | |
| 1163 | static inline unsigned |
| 1164 | lpfc_cmd_blksize(struct scsi_cmnd *sc) |
| 1165 | { |
| 1166 | return sc->device->sector_size; |
| 1167 | } |
| 1168 | |
| 1169 | /** |
| 1170 | * lpfc_get_cmd_dif_parms - Extract DIF parameters from SCSI command |
| 1171 | * @sc: in: SCSI command |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 1172 | * @apptagmask: out: app tag mask |
| 1173 | * @apptagval: out: app tag value |
| 1174 | * @reftag: out: ref tag (reference tag) |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 1175 | * |
| 1176 | * Description: |
| 1177 | * Extract DIF paramters from the command if possible. Otherwise, |
| 1178 | * use default paratmers. |
| 1179 | * |
| 1180 | **/ |
| 1181 | static inline void |
| 1182 | lpfc_get_cmd_dif_parms(struct scsi_cmnd *sc, uint16_t *apptagmask, |
| 1183 | uint16_t *apptagval, uint32_t *reftag) |
| 1184 | { |
| 1185 | struct scsi_dif_tuple *spt; |
| 1186 | unsigned char op = scsi_get_prot_op(sc); |
| 1187 | unsigned int protcnt = scsi_prot_sg_count(sc); |
| 1188 | static int cnt; |
| 1189 | |
| 1190 | if (protcnt && (op == SCSI_PROT_WRITE_STRIP || |
| 1191 | op == SCSI_PROT_WRITE_PASS || |
| 1192 | op == SCSI_PROT_WRITE_CONVERT)) { |
| 1193 | |
| 1194 | cnt++; |
| 1195 | spt = page_address(sg_page(scsi_prot_sglist(sc))) + |
| 1196 | scsi_prot_sglist(sc)[0].offset; |
| 1197 | *apptagmask = 0; |
| 1198 | *apptagval = 0; |
| 1199 | *reftag = cpu_to_be32(spt->ref_tag); |
| 1200 | |
| 1201 | } else { |
| 1202 | /* SBC defines ref tag to be lower 32bits of LBA */ |
| 1203 | *reftag = (uint32_t) (0xffffffff & scsi_get_lba(sc)); |
| 1204 | *apptagmask = 0; |
| 1205 | *apptagval = 0; |
| 1206 | } |
| 1207 | } |
| 1208 | |
| 1209 | /* |
| 1210 | * This function sets up buffer list for protection groups of |
| 1211 | * type LPFC_PG_TYPE_NO_DIF |
| 1212 | * |
| 1213 | * This is usually used when the HBA is instructed to generate |
| 1214 | * DIFs and insert them into data stream (or strip DIF from |
| 1215 | * incoming data stream) |
| 1216 | * |
| 1217 | * The buffer list consists of just one protection group described |
| 1218 | * below: |
| 1219 | * +-------------------------+ |
| 1220 | * start of prot group --> | PDE_1 | |
| 1221 | * +-------------------------+ |
| 1222 | * | Data BDE | |
| 1223 | * +-------------------------+ |
| 1224 | * |more Data BDE's ... (opt)| |
| 1225 | * +-------------------------+ |
| 1226 | * |
| 1227 | * @sc: pointer to scsi command we're working on |
| 1228 | * @bpl: pointer to buffer list for protection groups |
| 1229 | * @datacnt: number of segments of data that have been dma mapped |
| 1230 | * |
| 1231 | * Note: Data s/g buffers have been dma mapped |
| 1232 | */ |
| 1233 | static int |
| 1234 | lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc, |
| 1235 | struct ulp_bde64 *bpl, int datasegcnt) |
| 1236 | { |
| 1237 | struct scatterlist *sgde = NULL; /* s/g data entry */ |
| 1238 | struct lpfc_pde *pde1 = NULL; |
| 1239 | dma_addr_t physaddr; |
| 1240 | int i = 0, num_bde = 0; |
| 1241 | int datadir = sc->sc_data_direction; |
| 1242 | int prof = LPFC_PROF_INVALID; |
| 1243 | unsigned blksize; |
| 1244 | uint32_t reftag; |
| 1245 | uint16_t apptagmask, apptagval; |
| 1246 | |
| 1247 | pde1 = (struct lpfc_pde *) bpl; |
| 1248 | prof = lpfc_sc_to_sli_prof(sc); |
| 1249 | |
| 1250 | if (prof == LPFC_PROF_INVALID) |
| 1251 | goto out; |
| 1252 | |
| 1253 | /* extract some info from the scsi command for PDE1*/ |
| 1254 | blksize = lpfc_cmd_blksize(sc); |
| 1255 | lpfc_get_cmd_dif_parms(sc, &apptagmask, &apptagval, &reftag); |
| 1256 | |
| 1257 | /* setup PDE1 with what we have */ |
| 1258 | lpfc_pde_set_bg_parms(pde1, LPFC_PDE1_DESCRIPTOR, prof, blksize, |
| 1259 | BG_EC_STOP_ERR); |
| 1260 | lpfc_pde_set_dif_parms(pde1, apptagmask, apptagval, reftag); |
| 1261 | |
| 1262 | num_bde++; |
| 1263 | bpl++; |
| 1264 | |
| 1265 | /* assumption: caller has already run dma_map_sg on command data */ |
| 1266 | scsi_for_each_sg(sc, sgde, datasegcnt, i) { |
| 1267 | physaddr = sg_dma_address(sgde); |
| 1268 | bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr)); |
| 1269 | bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr)); |
| 1270 | bpl->tus.f.bdeSize = sg_dma_len(sgde); |
| 1271 | if (datadir == DMA_TO_DEVICE) |
| 1272 | bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64; |
| 1273 | else |
| 1274 | bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I; |
| 1275 | bpl->tus.w = le32_to_cpu(bpl->tus.w); |
| 1276 | bpl++; |
| 1277 | num_bde++; |
| 1278 | } |
| 1279 | |
| 1280 | out: |
| 1281 | return num_bde; |
| 1282 | } |
| 1283 | |
| 1284 | /* |
| 1285 | * This function sets up buffer list for protection groups of |
| 1286 | * type LPFC_PG_TYPE_DIF_BUF |
| 1287 | * |
| 1288 | * This is usually used when DIFs are in their own buffers, |
| 1289 | * separate from the data. The HBA can then by instructed |
| 1290 | * to place the DIFs in the outgoing stream. For read operations, |
| 1291 | * The HBA could extract the DIFs and place it in DIF buffers. |
| 1292 | * |
| 1293 | * The buffer list for this type consists of one or more of the |
| 1294 | * protection groups described below: |
| 1295 | * +-------------------------+ |
| 1296 | * start of first prot group --> | PDE_1 | |
| 1297 | * +-------------------------+ |
| 1298 | * | PDE_3 (Prot BDE) | |
| 1299 | * +-------------------------+ |
| 1300 | * | Data BDE | |
| 1301 | * +-------------------------+ |
| 1302 | * |more Data BDE's ... (opt)| |
| 1303 | * +-------------------------+ |
| 1304 | * start of new prot group --> | PDE_1 | |
| 1305 | * +-------------------------+ |
| 1306 | * | ... | |
| 1307 | * +-------------------------+ |
| 1308 | * |
| 1309 | * @sc: pointer to scsi command we're working on |
| 1310 | * @bpl: pointer to buffer list for protection groups |
| 1311 | * @datacnt: number of segments of data that have been dma mapped |
| 1312 | * @protcnt: number of segment of protection data that have been dma mapped |
| 1313 | * |
| 1314 | * Note: It is assumed that both data and protection s/g buffers have been |
| 1315 | * mapped for DMA |
| 1316 | */ |
| 1317 | static int |
| 1318 | lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, |
| 1319 | struct ulp_bde64 *bpl, int datacnt, int protcnt) |
| 1320 | { |
| 1321 | struct scatterlist *sgde = NULL; /* s/g data entry */ |
| 1322 | struct scatterlist *sgpe = NULL; /* s/g prot entry */ |
| 1323 | struct lpfc_pde *pde1 = NULL; |
| 1324 | struct ulp_bde64 *prot_bde = NULL; |
| 1325 | dma_addr_t dataphysaddr, protphysaddr; |
| 1326 | unsigned short curr_data = 0, curr_prot = 0; |
| 1327 | unsigned int split_offset, protgroup_len; |
| 1328 | unsigned int protgrp_blks, protgrp_bytes; |
| 1329 | unsigned int remainder, subtotal; |
| 1330 | int prof = LPFC_PROF_INVALID; |
| 1331 | int datadir = sc->sc_data_direction; |
| 1332 | unsigned char pgdone = 0, alldone = 0; |
| 1333 | unsigned blksize; |
| 1334 | uint32_t reftag; |
| 1335 | uint16_t apptagmask, apptagval; |
| 1336 | int num_bde = 0; |
| 1337 | |
| 1338 | sgpe = scsi_prot_sglist(sc); |
| 1339 | sgde = scsi_sglist(sc); |
| 1340 | |
| 1341 | if (!sgpe || !sgde) { |
| 1342 | lpfc_printf_log(phba, KERN_ERR, LOG_FCP, |
| 1343 | "9020 Invalid s/g entry: data=0x%p prot=0x%p\n", |
| 1344 | sgpe, sgde); |
| 1345 | return 0; |
| 1346 | } |
| 1347 | |
| 1348 | prof = lpfc_sc_to_sli_prof(sc); |
| 1349 | if (prof == LPFC_PROF_INVALID) |
| 1350 | goto out; |
| 1351 | |
| 1352 | /* extract some info from the scsi command for PDE1*/ |
| 1353 | blksize = lpfc_cmd_blksize(sc); |
| 1354 | lpfc_get_cmd_dif_parms(sc, &apptagmask, &apptagval, &reftag); |
| 1355 | |
| 1356 | split_offset = 0; |
| 1357 | do { |
| 1358 | /* setup the first PDE_1 */ |
| 1359 | pde1 = (struct lpfc_pde *) bpl; |
| 1360 | |
| 1361 | lpfc_pde_set_bg_parms(pde1, LPFC_PDE1_DESCRIPTOR, prof, blksize, |
| 1362 | BG_EC_STOP_ERR); |
| 1363 | lpfc_pde_set_dif_parms(pde1, apptagmask, apptagval, reftag); |
| 1364 | |
| 1365 | num_bde++; |
| 1366 | bpl++; |
| 1367 | |
| 1368 | /* setup the first BDE that points to protection buffer */ |
| 1369 | prot_bde = (struct ulp_bde64 *) bpl; |
| 1370 | protphysaddr = sg_dma_address(sgpe); |
| 1371 | prot_bde->addrLow = le32_to_cpu(putPaddrLow(protphysaddr)); |
| 1372 | prot_bde->addrHigh = le32_to_cpu(putPaddrHigh(protphysaddr)); |
| 1373 | protgroup_len = sg_dma_len(sgpe); |
| 1374 | |
| 1375 | |
| 1376 | /* must be integer multiple of the DIF block length */ |
| 1377 | BUG_ON(protgroup_len % 8); |
| 1378 | |
| 1379 | protgrp_blks = protgroup_len / 8; |
| 1380 | protgrp_bytes = protgrp_blks * blksize; |
| 1381 | |
| 1382 | prot_bde->tus.f.bdeSize = protgroup_len; |
| 1383 | if (datadir == DMA_TO_DEVICE) |
| 1384 | prot_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64; |
| 1385 | else |
| 1386 | prot_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64I; |
| 1387 | prot_bde->tus.w = le32_to_cpu(bpl->tus.w); |
| 1388 | |
| 1389 | curr_prot++; |
| 1390 | num_bde++; |
| 1391 | |
| 1392 | /* setup BDE's for data blocks associated with DIF data */ |
| 1393 | pgdone = 0; |
| 1394 | subtotal = 0; /* total bytes processed for current prot grp */ |
| 1395 | while (!pgdone) { |
| 1396 | if (!sgde) { |
| 1397 | printk(KERN_ERR "%s Invalid data segment\n", |
| 1398 | __func__); |
| 1399 | return 0; |
| 1400 | } |
| 1401 | bpl++; |
| 1402 | dataphysaddr = sg_dma_address(sgde) + split_offset; |
| 1403 | bpl->addrLow = le32_to_cpu(putPaddrLow(dataphysaddr)); |
| 1404 | bpl->addrHigh = le32_to_cpu(putPaddrHigh(dataphysaddr)); |
| 1405 | |
| 1406 | remainder = sg_dma_len(sgde) - split_offset; |
| 1407 | |
| 1408 | if ((subtotal + remainder) <= protgrp_bytes) { |
| 1409 | /* we can use this whole buffer */ |
| 1410 | bpl->tus.f.bdeSize = remainder; |
| 1411 | split_offset = 0; |
| 1412 | |
| 1413 | if ((subtotal + remainder) == protgrp_bytes) |
| 1414 | pgdone = 1; |
| 1415 | } else { |
| 1416 | /* must split this buffer with next prot grp */ |
| 1417 | bpl->tus.f.bdeSize = protgrp_bytes - subtotal; |
| 1418 | split_offset += bpl->tus.f.bdeSize; |
| 1419 | } |
| 1420 | |
| 1421 | subtotal += bpl->tus.f.bdeSize; |
| 1422 | |
| 1423 | if (datadir == DMA_TO_DEVICE) |
| 1424 | bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64; |
| 1425 | else |
| 1426 | bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I; |
| 1427 | bpl->tus.w = le32_to_cpu(bpl->tus.w); |
| 1428 | |
| 1429 | num_bde++; |
| 1430 | curr_data++; |
| 1431 | |
| 1432 | if (split_offset) |
| 1433 | break; |
| 1434 | |
| 1435 | /* Move to the next s/g segment if possible */ |
| 1436 | sgde = sg_next(sgde); |
| 1437 | } |
| 1438 | |
| 1439 | /* are we done ? */ |
| 1440 | if (curr_prot == protcnt) { |
| 1441 | alldone = 1; |
| 1442 | } else if (curr_prot < protcnt) { |
| 1443 | /* advance to next prot buffer */ |
| 1444 | sgpe = sg_next(sgpe); |
| 1445 | bpl++; |
| 1446 | |
| 1447 | /* update the reference tag */ |
| 1448 | reftag += protgrp_blks; |
| 1449 | } else { |
| 1450 | /* if we're here, we have a bug */ |
| 1451 | printk(KERN_ERR "BLKGRD: bug in %s\n", __func__); |
| 1452 | } |
| 1453 | |
| 1454 | } while (!alldone); |
| 1455 | |
| 1456 | out: |
| 1457 | |
| 1458 | |
| 1459 | return num_bde; |
| 1460 | } |
| 1461 | /* |
| 1462 | * Given a SCSI command that supports DIF, determine composition of protection |
| 1463 | * groups involved in setting up buffer lists |
| 1464 | * |
| 1465 | * Returns: |
| 1466 | * for DIF (for both read and write) |
| 1467 | * */ |
| 1468 | static int |
| 1469 | lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc) |
| 1470 | { |
| 1471 | int ret = LPFC_PG_TYPE_INVALID; |
| 1472 | unsigned char op = scsi_get_prot_op(sc); |
| 1473 | |
| 1474 | switch (op) { |
| 1475 | case SCSI_PROT_READ_STRIP: |
| 1476 | case SCSI_PROT_WRITE_INSERT: |
| 1477 | ret = LPFC_PG_TYPE_NO_DIF; |
| 1478 | break; |
| 1479 | case SCSI_PROT_READ_INSERT: |
| 1480 | case SCSI_PROT_WRITE_STRIP: |
| 1481 | case SCSI_PROT_READ_PASS: |
| 1482 | case SCSI_PROT_WRITE_PASS: |
| 1483 | case SCSI_PROT_WRITE_CONVERT: |
| 1484 | case SCSI_PROT_READ_CONVERT: |
| 1485 | ret = LPFC_PG_TYPE_DIF_BUF; |
| 1486 | break; |
| 1487 | default: |
| 1488 | lpfc_printf_log(phba, KERN_ERR, LOG_FCP, |
| 1489 | "9021 Unsupported protection op:%d\n", op); |
| 1490 | break; |
| 1491 | } |
| 1492 | |
| 1493 | return ret; |
| 1494 | } |
| 1495 | |
| 1496 | /* |
| 1497 | * This is the protection/DIF aware version of |
| 1498 | * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the |
| 1499 | * two functions eventually, but for now, it's here |
| 1500 | */ |
| 1501 | static int |
| 1502 | lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, |
| 1503 | struct lpfc_scsi_buf *lpfc_cmd) |
| 1504 | { |
| 1505 | struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd; |
| 1506 | struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd; |
| 1507 | struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl; |
| 1508 | IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb; |
| 1509 | uint32_t num_bde = 0; |
| 1510 | int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction; |
| 1511 | int prot_group_type = 0; |
| 1512 | int diflen, fcpdl; |
| 1513 | unsigned blksize; |
| 1514 | |
| 1515 | /* |
| 1516 | * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd |
| 1517 | * fcp_rsp regions to the first data bde entry |
| 1518 | */ |
| 1519 | bpl += 2; |
| 1520 | if (scsi_sg_count(scsi_cmnd)) { |
| 1521 | /* |
| 1522 | * The driver stores the segment count returned from pci_map_sg |
| 1523 | * because this a count of dma-mappings used to map the use_sg |
| 1524 | * pages. They are not guaranteed to be the same for those |
| 1525 | * architectures that implement an IOMMU. |
| 1526 | */ |
| 1527 | datasegcnt = dma_map_sg(&phba->pcidev->dev, |
| 1528 | scsi_sglist(scsi_cmnd), |
| 1529 | scsi_sg_count(scsi_cmnd), datadir); |
| 1530 | if (unlikely(!datasegcnt)) |
| 1531 | return 1; |
| 1532 | |
| 1533 | lpfc_cmd->seg_cnt = datasegcnt; |
| 1534 | if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) { |
| 1535 | printk(KERN_ERR "%s: Too many sg segments from " |
| 1536 | "dma_map_sg. Config %d, seg_cnt %d\n", |
| 1537 | __func__, phba->cfg_sg_seg_cnt, |
| 1538 | lpfc_cmd->seg_cnt); |
| 1539 | scsi_dma_unmap(scsi_cmnd); |
| 1540 | return 1; |
| 1541 | } |
| 1542 | |
| 1543 | prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd); |
| 1544 | |
| 1545 | switch (prot_group_type) { |
| 1546 | case LPFC_PG_TYPE_NO_DIF: |
| 1547 | num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl, |
| 1548 | datasegcnt); |
| 1549 | /* we shoud have 2 or more entries in buffer list */ |
| 1550 | if (num_bde < 2) |
| 1551 | goto err; |
| 1552 | break; |
| 1553 | case LPFC_PG_TYPE_DIF_BUF:{ |
| 1554 | /* |
| 1555 | * This type indicates that protection buffers are |
| 1556 | * passed to the driver, so that needs to be prepared |
| 1557 | * for DMA |
| 1558 | */ |
| 1559 | protsegcnt = dma_map_sg(&phba->pcidev->dev, |
| 1560 | scsi_prot_sglist(scsi_cmnd), |
| 1561 | scsi_prot_sg_count(scsi_cmnd), datadir); |
| 1562 | if (unlikely(!protsegcnt)) { |
| 1563 | scsi_dma_unmap(scsi_cmnd); |
| 1564 | return 1; |
| 1565 | } |
| 1566 | |
| 1567 | lpfc_cmd->prot_seg_cnt = protsegcnt; |
| 1568 | if (lpfc_cmd->prot_seg_cnt |
| 1569 | > phba->cfg_prot_sg_seg_cnt) { |
| 1570 | printk(KERN_ERR "%s: Too many prot sg segments " |
| 1571 | "from dma_map_sg. Config %d," |
| 1572 | "prot_seg_cnt %d\n", __func__, |
| 1573 | phba->cfg_prot_sg_seg_cnt, |
| 1574 | lpfc_cmd->prot_seg_cnt); |
| 1575 | dma_unmap_sg(&phba->pcidev->dev, |
| 1576 | scsi_prot_sglist(scsi_cmnd), |
| 1577 | scsi_prot_sg_count(scsi_cmnd), |
| 1578 | datadir); |
| 1579 | scsi_dma_unmap(scsi_cmnd); |
| 1580 | return 1; |
| 1581 | } |
| 1582 | |
| 1583 | num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl, |
| 1584 | datasegcnt, protsegcnt); |
| 1585 | /* we shoud have 3 or more entries in buffer list */ |
| 1586 | if (num_bde < 3) |
| 1587 | goto err; |
| 1588 | break; |
| 1589 | } |
| 1590 | case LPFC_PG_TYPE_INVALID: |
| 1591 | default: |
| 1592 | lpfc_printf_log(phba, KERN_ERR, LOG_FCP, |
| 1593 | "9022 Unexpected protection group %i\n", |
| 1594 | prot_group_type); |
| 1595 | return 1; |
| 1596 | } |
| 1597 | } |
| 1598 | |
| 1599 | /* |
| 1600 | * Finish initializing those IOCB fields that are dependent on the |
| 1601 | * scsi_cmnd request_buffer. Note that the bdeSize is explicitly |
| 1602 | * reinitialized since all iocb memory resources are used many times |
| 1603 | * for transmit, receive, and continuation bpl's. |
| 1604 | */ |
| 1605 | iocb_cmd->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64)); |
| 1606 | iocb_cmd->un.fcpi64.bdl.bdeSize += (num_bde * sizeof(struct ulp_bde64)); |
| 1607 | iocb_cmd->ulpBdeCount = 1; |
| 1608 | iocb_cmd->ulpLe = 1; |
| 1609 | |
| 1610 | fcpdl = scsi_bufflen(scsi_cmnd); |
| 1611 | |
| 1612 | if (scsi_get_prot_type(scsi_cmnd) == SCSI_PROT_DIF_TYPE1) { |
| 1613 | /* |
| 1614 | * We are in DIF Type 1 mode |
| 1615 | * Every data block has a 8 byte DIF (trailer) |
| 1616 | * attached to it. Must ajust FCP data length |
| 1617 | */ |
| 1618 | blksize = lpfc_cmd_blksize(scsi_cmnd); |
| 1619 | diflen = (fcpdl / blksize) * 8; |
| 1620 | fcpdl += diflen; |
| 1621 | } |
| 1622 | fcp_cmnd->fcpDl = be32_to_cpu(fcpdl); |
| 1623 | |
| 1624 | /* |
| 1625 | * Due to difference in data length between DIF/non-DIF paths, |
| 1626 | * we need to set word 4 of IOCB here |
| 1627 | */ |
| 1628 | iocb_cmd->un.fcpi.fcpi_parm = fcpdl; |
| 1629 | |
| 1630 | return 0; |
| 1631 | err: |
| 1632 | lpfc_printf_log(phba, KERN_ERR, LOG_FCP, |
| 1633 | "9023 Could not setup all needed BDE's" |
| 1634 | "prot_group_type=%d, num_bde=%d\n", |
| 1635 | prot_group_type, num_bde); |
| 1636 | return 1; |
| 1637 | } |
| 1638 | |
| 1639 | /* |
| 1640 | * This function checks for BlockGuard errors detected by |
| 1641 | * the HBA. In case of errors, the ASC/ASCQ fields in the |
| 1642 | * sense buffer will be set accordingly, paired with |
| 1643 | * ILLEGAL_REQUEST to signal to the kernel that the HBA |
| 1644 | * detected corruption. |
| 1645 | * |
| 1646 | * Returns: |
| 1647 | * 0 - No error found |
| 1648 | * 1 - BlockGuard error found |
| 1649 | * -1 - Internal error (bad profile, ...etc) |
| 1650 | */ |
| 1651 | static int |
| 1652 | lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, |
| 1653 | struct lpfc_iocbq *pIocbOut) |
| 1654 | { |
| 1655 | struct scsi_cmnd *cmd = lpfc_cmd->pCmd; |
| 1656 | struct sli3_bg_fields *bgf = &pIocbOut->iocb.unsli3.sli3_bg; |
| 1657 | int ret = 0; |
| 1658 | uint32_t bghm = bgf->bghm; |
| 1659 | uint32_t bgstat = bgf->bgstat; |
| 1660 | uint64_t failing_sector = 0; |
| 1661 | |
| 1662 | printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%lx " |
| 1663 | "bgstat=0x%x bghm=0x%x\n", |
James Smart | 87b5c32 | 2008-12-16 10:34:09 -0500 | [diff] [blame] | 1664 | cmd->cmnd[0], (unsigned long long)scsi_get_lba(cmd), |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 1665 | cmd->request->nr_sectors, bgstat, bghm); |
| 1666 | |
| 1667 | spin_lock(&_dump_buf_lock); |
| 1668 | if (!_dump_buf_done) { |
| 1669 | printk(KERN_ERR "Saving Data for %u blocks to debugfs\n", |
| 1670 | (cmd->cmnd[7] << 8 | cmd->cmnd[8])); |
| 1671 | lpfc_debug_save_data(cmd); |
| 1672 | |
| 1673 | /* If we have a prot sgl, save the DIF buffer */ |
| 1674 | if (lpfc_prot_group_type(phba, cmd) == |
| 1675 | LPFC_PG_TYPE_DIF_BUF) { |
| 1676 | printk(KERN_ERR "Saving DIF for %u blocks to debugfs\n", |
| 1677 | (cmd->cmnd[7] << 8 | cmd->cmnd[8])); |
| 1678 | lpfc_debug_save_dif(cmd); |
| 1679 | } |
| 1680 | |
| 1681 | _dump_buf_done = 1; |
| 1682 | } |
| 1683 | spin_unlock(&_dump_buf_lock); |
| 1684 | |
| 1685 | if (lpfc_bgs_get_invalid_prof(bgstat)) { |
| 1686 | cmd->result = ScsiResult(DID_ERROR, 0); |
| 1687 | printk(KERN_ERR "Invalid BlockGuard profile. bgstat:0x%x\n", |
| 1688 | bgstat); |
| 1689 | ret = (-1); |
| 1690 | goto out; |
| 1691 | } |
| 1692 | |
| 1693 | if (lpfc_bgs_get_uninit_dif_block(bgstat)) { |
| 1694 | cmd->result = ScsiResult(DID_ERROR, 0); |
| 1695 | printk(KERN_ERR "Invalid BlockGuard DIF Block. bgstat:0x%x\n", |
| 1696 | bgstat); |
| 1697 | ret = (-1); |
| 1698 | goto out; |
| 1699 | } |
| 1700 | |
| 1701 | if (lpfc_bgs_get_guard_err(bgstat)) { |
| 1702 | ret = 1; |
| 1703 | |
| 1704 | scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, |
| 1705 | 0x10, 0x1); |
Martin K. Petersen | 1c9fbaf | 2009-01-04 03:14:11 -0500 | [diff] [blame] | 1706 | cmd->result = DRIVER_SENSE << 24 |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 1707 | | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); |
| 1708 | phba->bg_guard_err_cnt++; |
| 1709 | printk(KERN_ERR "BLKGRD: guard_tag error\n"); |
| 1710 | } |
| 1711 | |
| 1712 | if (lpfc_bgs_get_reftag_err(bgstat)) { |
| 1713 | ret = 1; |
| 1714 | |
| 1715 | scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, |
| 1716 | 0x10, 0x3); |
Martin K. Petersen | 1c9fbaf | 2009-01-04 03:14:11 -0500 | [diff] [blame] | 1717 | cmd->result = DRIVER_SENSE << 24 |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 1718 | | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); |
| 1719 | |
| 1720 | phba->bg_reftag_err_cnt++; |
| 1721 | printk(KERN_ERR "BLKGRD: ref_tag error\n"); |
| 1722 | } |
| 1723 | |
| 1724 | if (lpfc_bgs_get_apptag_err(bgstat)) { |
| 1725 | ret = 1; |
| 1726 | |
| 1727 | scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, |
| 1728 | 0x10, 0x2); |
Martin K. Petersen | 1c9fbaf | 2009-01-04 03:14:11 -0500 | [diff] [blame] | 1729 | cmd->result = DRIVER_SENSE << 24 |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 1730 | | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); |
| 1731 | |
| 1732 | phba->bg_apptag_err_cnt++; |
| 1733 | printk(KERN_ERR "BLKGRD: app_tag error\n"); |
| 1734 | } |
| 1735 | |
| 1736 | if (lpfc_bgs_get_hi_water_mark_present(bgstat)) { |
| 1737 | /* |
| 1738 | * setup sense data descriptor 0 per SPC-4 as an information |
| 1739 | * field, and put the failing LBA in it |
| 1740 | */ |
| 1741 | cmd->sense_buffer[8] = 0; /* Information */ |
| 1742 | cmd->sense_buffer[9] = 0xa; /* Add. length */ |
David Howells | 2344b5b | 2009-04-14 17:08:34 +0100 | [diff] [blame] | 1743 | bghm /= cmd->device->sector_size; |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 1744 | |
| 1745 | failing_sector = scsi_get_lba(cmd); |
| 1746 | failing_sector += bghm; |
| 1747 | |
| 1748 | put_unaligned_be64(failing_sector, &cmd->sense_buffer[10]); |
| 1749 | } |
| 1750 | |
| 1751 | if (!ret) { |
| 1752 | /* No error was reported - problem in FW? */ |
| 1753 | cmd->result = ScsiResult(DID_ERROR, 0); |
| 1754 | printk(KERN_ERR "BLKGRD: no errors reported!\n"); |
| 1755 | } |
| 1756 | |
| 1757 | out: |
| 1758 | return ret; |
| 1759 | } |
| 1760 | |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 1761 | /** |
James Smart | da0436e | 2009-05-22 14:51:39 -0400 | [diff] [blame] | 1762 | * lpfc_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec |
| 1763 | * @phba: The Hba for which this call is being executed. |
| 1764 | * @lpfc_cmd: The scsi buffer which is going to be mapped. |
| 1765 | * |
| 1766 | * This routine does the pci dma mapping for scatter-gather list of scsi cmnd |
| 1767 | * field of @lpfc_cmd for device with SLI-4 interface spec. |
| 1768 | * |
| 1769 | * Return codes: |
| 1770 | * 1 - Error |
| 1771 | * 0 - Success |
| 1772 | **/ |
| 1773 | static int |
| 1774 | lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) |
| 1775 | { |
| 1776 | struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd; |
| 1777 | struct scatterlist *sgel = NULL; |
| 1778 | struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd; |
| 1779 | struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl; |
| 1780 | IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb; |
| 1781 | dma_addr_t physaddr; |
| 1782 | uint32_t num_bde = 0; |
| 1783 | uint32_t dma_len; |
| 1784 | uint32_t dma_offset = 0; |
| 1785 | int nseg; |
| 1786 | |
| 1787 | /* |
| 1788 | * There are three possibilities here - use scatter-gather segment, use |
| 1789 | * the single mapping, or neither. Start the lpfc command prep by |
| 1790 | * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first |
| 1791 | * data bde entry. |
| 1792 | */ |
| 1793 | if (scsi_sg_count(scsi_cmnd)) { |
| 1794 | /* |
| 1795 | * The driver stores the segment count returned from pci_map_sg |
| 1796 | * because this a count of dma-mappings used to map the use_sg |
| 1797 | * pages. They are not guaranteed to be the same for those |
| 1798 | * architectures that implement an IOMMU. |
| 1799 | */ |
| 1800 | |
| 1801 | nseg = scsi_dma_map(scsi_cmnd); |
| 1802 | if (unlikely(!nseg)) |
| 1803 | return 1; |
| 1804 | sgl += 1; |
| 1805 | /* clear the last flag in the fcp_rsp map entry */ |
| 1806 | sgl->word2 = le32_to_cpu(sgl->word2); |
| 1807 | bf_set(lpfc_sli4_sge_last, sgl, 0); |
| 1808 | sgl->word2 = cpu_to_le32(sgl->word2); |
| 1809 | sgl += 1; |
| 1810 | |
| 1811 | lpfc_cmd->seg_cnt = nseg; |
| 1812 | if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) { |
| 1813 | printk(KERN_ERR "%s: Too many sg segments from " |
| 1814 | "dma_map_sg. Config %d, seg_cnt %d\n", |
| 1815 | __func__, phba->cfg_sg_seg_cnt, |
| 1816 | lpfc_cmd->seg_cnt); |
| 1817 | scsi_dma_unmap(scsi_cmnd); |
| 1818 | return 1; |
| 1819 | } |
| 1820 | |
| 1821 | /* |
| 1822 | * The driver established a maximum scatter-gather segment count |
| 1823 | * during probe that limits the number of sg elements in any |
| 1824 | * single scsi command. Just run through the seg_cnt and format |
| 1825 | * the sge's. |
| 1826 | * When using SLI-3 the driver will try to fit all the BDEs into |
| 1827 | * the IOCB. If it can't then the BDEs get added to a BPL as it |
| 1828 | * does for SLI-2 mode. |
| 1829 | */ |
| 1830 | scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) { |
| 1831 | physaddr = sg_dma_address(sgel); |
| 1832 | dma_len = sg_dma_len(sgel); |
| 1833 | bf_set(lpfc_sli4_sge_len, sgl, sg_dma_len(sgel)); |
| 1834 | sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr)); |
| 1835 | sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr)); |
| 1836 | if ((num_bde + 1) == nseg) |
| 1837 | bf_set(lpfc_sli4_sge_last, sgl, 1); |
| 1838 | else |
| 1839 | bf_set(lpfc_sli4_sge_last, sgl, 0); |
| 1840 | bf_set(lpfc_sli4_sge_offset, sgl, dma_offset); |
| 1841 | sgl->word2 = cpu_to_le32(sgl->word2); |
| 1842 | sgl->word3 = cpu_to_le32(sgl->word3); |
| 1843 | dma_offset += dma_len; |
| 1844 | sgl++; |
| 1845 | } |
| 1846 | } else { |
| 1847 | sgl += 1; |
| 1848 | /* clear the last flag in the fcp_rsp map entry */ |
| 1849 | sgl->word2 = le32_to_cpu(sgl->word2); |
| 1850 | bf_set(lpfc_sli4_sge_last, sgl, 1); |
| 1851 | sgl->word2 = cpu_to_le32(sgl->word2); |
| 1852 | } |
| 1853 | |
| 1854 | /* |
| 1855 | * Finish initializing those IOCB fields that are dependent on the |
| 1856 | * scsi_cmnd request_buffer. Note that for SLI-2 the bdeSize is |
| 1857 | * explicitly reinitialized. |
| 1858 | * all iocb memory resources are reused. |
| 1859 | */ |
| 1860 | fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd)); |
| 1861 | |
| 1862 | /* |
| 1863 | * Due to difference in data length between DIF/non-DIF paths, |
| 1864 | * we need to set word 4 of IOCB here |
| 1865 | */ |
| 1866 | iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd); |
| 1867 | return 0; |
| 1868 | } |
| 1869 | |
| 1870 | /** |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 1871 | * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer |
| 1872 | * @phba: The Hba for which this call is being executed. |
| 1873 | * @lpfc_cmd: The scsi buffer which is going to be mapped. |
| 1874 | * |
| 1875 | * This routine wraps the actual DMA mapping function pointer from the |
| 1876 | * lpfc_hba struct. |
| 1877 | * |
| 1878 | * Return codes: |
| 1879 | * 1 - Error |
| 1880 | * 0 - Success |
| 1881 | **/ |
| 1882 | static inline int |
| 1883 | lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) |
| 1884 | { |
| 1885 | return phba->lpfc_scsi_prep_dma_buf(phba, lpfc_cmd); |
| 1886 | } |
| 1887 | |
| 1888 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 1889 | * lpfc_send_scsi_error_event - Posts an event when there is SCSI error |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 1890 | * @phba: Pointer to hba context object. |
| 1891 | * @vport: Pointer to vport object. |
| 1892 | * @lpfc_cmd: Pointer to lpfc scsi command which reported the error. |
| 1893 | * @rsp_iocb: Pointer to response iocb object which reported error. |
| 1894 | * |
| 1895 | * This function posts an event when there is a SCSI command reporting |
| 1896 | * error from the scsi device. |
| 1897 | **/ |
| 1898 | static void |
| 1899 | lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport, |
| 1900 | struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_iocbq *rsp_iocb) { |
| 1901 | struct scsi_cmnd *cmnd = lpfc_cmd->pCmd; |
| 1902 | struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp; |
| 1903 | uint32_t resp_info = fcprsp->rspStatus2; |
| 1904 | uint32_t scsi_status = fcprsp->rspStatus3; |
| 1905 | uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm; |
| 1906 | struct lpfc_fast_path_event *fast_path_evt = NULL; |
| 1907 | struct lpfc_nodelist *pnode = lpfc_cmd->rdata->pnode; |
| 1908 | unsigned long flags; |
| 1909 | |
| 1910 | /* If there is queuefull or busy condition send a scsi event */ |
| 1911 | if ((cmnd->result == SAM_STAT_TASK_SET_FULL) || |
| 1912 | (cmnd->result == SAM_STAT_BUSY)) { |
| 1913 | fast_path_evt = lpfc_alloc_fast_evt(phba); |
| 1914 | if (!fast_path_evt) |
| 1915 | return; |
| 1916 | fast_path_evt->un.scsi_evt.event_type = |
| 1917 | FC_REG_SCSI_EVENT; |
| 1918 | fast_path_evt->un.scsi_evt.subcategory = |
| 1919 | (cmnd->result == SAM_STAT_TASK_SET_FULL) ? |
| 1920 | LPFC_EVENT_QFULL : LPFC_EVENT_DEVBSY; |
| 1921 | fast_path_evt->un.scsi_evt.lun = cmnd->device->lun; |
| 1922 | memcpy(&fast_path_evt->un.scsi_evt.wwpn, |
| 1923 | &pnode->nlp_portname, sizeof(struct lpfc_name)); |
| 1924 | memcpy(&fast_path_evt->un.scsi_evt.wwnn, |
| 1925 | &pnode->nlp_nodename, sizeof(struct lpfc_name)); |
| 1926 | } else if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen && |
| 1927 | ((cmnd->cmnd[0] == READ_10) || (cmnd->cmnd[0] == WRITE_10))) { |
| 1928 | fast_path_evt = lpfc_alloc_fast_evt(phba); |
| 1929 | if (!fast_path_evt) |
| 1930 | return; |
| 1931 | fast_path_evt->un.check_cond_evt.scsi_event.event_type = |
| 1932 | FC_REG_SCSI_EVENT; |
| 1933 | fast_path_evt->un.check_cond_evt.scsi_event.subcategory = |
| 1934 | LPFC_EVENT_CHECK_COND; |
| 1935 | fast_path_evt->un.check_cond_evt.scsi_event.lun = |
| 1936 | cmnd->device->lun; |
| 1937 | memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwpn, |
| 1938 | &pnode->nlp_portname, sizeof(struct lpfc_name)); |
| 1939 | memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwnn, |
| 1940 | &pnode->nlp_nodename, sizeof(struct lpfc_name)); |
| 1941 | fast_path_evt->un.check_cond_evt.sense_key = |
| 1942 | cmnd->sense_buffer[2] & 0xf; |
| 1943 | fast_path_evt->un.check_cond_evt.asc = cmnd->sense_buffer[12]; |
| 1944 | fast_path_evt->un.check_cond_evt.ascq = cmnd->sense_buffer[13]; |
| 1945 | } else if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) && |
| 1946 | fcpi_parm && |
| 1947 | ((be32_to_cpu(fcprsp->rspResId) != fcpi_parm) || |
| 1948 | ((scsi_status == SAM_STAT_GOOD) && |
| 1949 | !(resp_info & (RESID_UNDER | RESID_OVER))))) { |
| 1950 | /* |
| 1951 | * If status is good or resid does not match with fcp_param and |
| 1952 | * there is valid fcpi_parm, then there is a read_check error |
| 1953 | */ |
| 1954 | fast_path_evt = lpfc_alloc_fast_evt(phba); |
| 1955 | if (!fast_path_evt) |
| 1956 | return; |
| 1957 | fast_path_evt->un.read_check_error.header.event_type = |
| 1958 | FC_REG_FABRIC_EVENT; |
| 1959 | fast_path_evt->un.read_check_error.header.subcategory = |
| 1960 | LPFC_EVENT_FCPRDCHKERR; |
| 1961 | memcpy(&fast_path_evt->un.read_check_error.header.wwpn, |
| 1962 | &pnode->nlp_portname, sizeof(struct lpfc_name)); |
| 1963 | memcpy(&fast_path_evt->un.read_check_error.header.wwnn, |
| 1964 | &pnode->nlp_nodename, sizeof(struct lpfc_name)); |
| 1965 | fast_path_evt->un.read_check_error.lun = cmnd->device->lun; |
| 1966 | fast_path_evt->un.read_check_error.opcode = cmnd->cmnd[0]; |
| 1967 | fast_path_evt->un.read_check_error.fcpiparam = |
| 1968 | fcpi_parm; |
| 1969 | } else |
| 1970 | return; |
| 1971 | |
| 1972 | fast_path_evt->vport = vport; |
| 1973 | spin_lock_irqsave(&phba->hbalock, flags); |
| 1974 | list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list); |
| 1975 | spin_unlock_irqrestore(&phba->hbalock, flags); |
| 1976 | lpfc_worker_wake_up(phba); |
| 1977 | return; |
| 1978 | } |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 1979 | |
| 1980 | /** |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 1981 | * lpfc_scsi_unprep_dma_buf_s3 - Un-map DMA mapping of SG-list for SLI3 dev |
| 1982 | * @phba: The HBA for which this call is being executed. |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 1983 | * @psb: The scsi buffer which is going to be un-mapped. |
| 1984 | * |
| 1985 | * This routine does DMA un-mapping of scatter gather list of scsi command |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 1986 | * field of @lpfc_cmd for device with SLI-3 interface spec. |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 1987 | **/ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1988 | static void |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 1989 | lpfc_scsi_unprep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) |
James Smart | bcf4dbf | 2006-07-06 15:50:08 -0400 | [diff] [blame] | 1990 | { |
| 1991 | /* |
| 1992 | * There are only two special cases to consider. (1) the scsi command |
| 1993 | * requested scatter-gather usage or (2) the scsi command allocated |
| 1994 | * a request buffer, but did not request use_sg. There is a third |
| 1995 | * case, but it does not require resource deallocation. |
| 1996 | */ |
FUJITA Tomonori | a0b4f78 | 2007-06-17 19:56:39 -0500 | [diff] [blame] | 1997 | if (psb->seg_cnt > 0) |
| 1998 | scsi_dma_unmap(psb->pCmd); |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 1999 | if (psb->prot_seg_cnt > 0) |
| 2000 | dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(psb->pCmd), |
| 2001 | scsi_prot_sg_count(psb->pCmd), |
| 2002 | psb->pCmd->sc_data_direction); |
James Smart | bcf4dbf | 2006-07-06 15:50:08 -0400 | [diff] [blame] | 2003 | } |
| 2004 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2005 | /** |
James Smart | da0436e | 2009-05-22 14:51:39 -0400 | [diff] [blame] | 2006 | * lpfc_scsi_unprep_dma_buf_s4 - Un-map DMA mapping of SG-list for SLI4 dev |
| 2007 | * @phba: The Hba for which this call is being executed. |
| 2008 | * @psb: The scsi buffer which is going to be un-mapped. |
| 2009 | * |
| 2010 | * This routine does DMA un-mapping of scatter gather list of scsi command |
| 2011 | * field of @lpfc_cmd for device with SLI-4 interface spec. If we have to |
| 2012 | * remove the sgl for this scsi buffer then we will do it here. For now |
| 2013 | * we should be able to just call the sli3 unprep routine. |
| 2014 | **/ |
| 2015 | static void |
| 2016 | lpfc_scsi_unprep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) |
| 2017 | { |
| 2018 | lpfc_scsi_unprep_dma_buf_s3(phba, psb); |
| 2019 | } |
| 2020 | |
| 2021 | /** |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 2022 | * lpfc_scsi_unprep_dma_buf - Wrapper function for unmap DMA mapping of SG-list |
| 2023 | * @phba: The Hba for which this call is being executed. |
| 2024 | * @psb: The scsi buffer which is going to be un-mapped. |
| 2025 | * |
| 2026 | * This routine does DMA un-mapping of scatter gather list of scsi command |
| 2027 | * field of @lpfc_cmd for device with SLI-4 interface spec. |
| 2028 | **/ |
| 2029 | static void |
| 2030 | lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) |
| 2031 | { |
| 2032 | phba->lpfc_scsi_unprep_dma_buf(phba, psb); |
| 2033 | } |
| 2034 | |
| 2035 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 2036 | * lpfc_handler_fcp_err - FCP response handler |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2037 | * @vport: The virtual port for which this call is being executed. |
| 2038 | * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. |
| 2039 | * @rsp_iocb: The response IOCB which contains FCP error. |
| 2040 | * |
| 2041 | * This routine is called to process response IOCB with status field |
| 2042 | * IOSTAT_FCP_RSP_ERROR. This routine sets result field of scsi command |
| 2043 | * based upon SCSI and FCP error. |
| 2044 | **/ |
James Smart | bcf4dbf | 2006-07-06 15:50:08 -0400 | [diff] [blame] | 2045 | static void |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 2046 | lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, |
| 2047 | struct lpfc_iocbq *rsp_iocb) |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2048 | { |
| 2049 | struct scsi_cmnd *cmnd = lpfc_cmd->pCmd; |
| 2050 | struct fcp_cmnd *fcpcmd = lpfc_cmd->fcp_cmnd; |
| 2051 | struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp; |
James Smart | 7054a60 | 2007-04-25 09:52:34 -0400 | [diff] [blame] | 2052 | uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2053 | uint32_t resp_info = fcprsp->rspStatus2; |
| 2054 | uint32_t scsi_status = fcprsp->rspStatus3; |
James Smart | c774395 | 2006-12-02 13:34:42 -0500 | [diff] [blame] | 2055 | uint32_t *lp; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2056 | uint32_t host_status = DID_OK; |
| 2057 | uint32_t rsplen = 0; |
James Smart | c774395 | 2006-12-02 13:34:42 -0500 | [diff] [blame] | 2058 | uint32_t logit = LOG_FCP | LOG_FCP_ERROR; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2059 | |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 2060 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2061 | /* |
| 2062 | * If this is a task management command, there is no |
| 2063 | * scsi packet associated with this lpfc_cmd. The driver |
| 2064 | * consumes it. |
| 2065 | */ |
| 2066 | if (fcpcmd->fcpCntl2) { |
| 2067 | scsi_status = 0; |
| 2068 | goto out; |
| 2069 | } |
| 2070 | |
James Smart | c774395 | 2006-12-02 13:34:42 -0500 | [diff] [blame] | 2071 | if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) { |
| 2072 | uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen); |
| 2073 | if (snslen > SCSI_SENSE_BUFFERSIZE) |
| 2074 | snslen = SCSI_SENSE_BUFFERSIZE; |
| 2075 | |
| 2076 | if (resp_info & RSP_LEN_VALID) |
| 2077 | rsplen = be32_to_cpu(fcprsp->rspRspLen); |
| 2078 | memcpy(cmnd->sense_buffer, &fcprsp->rspInfo0 + rsplen, snslen); |
| 2079 | } |
| 2080 | lp = (uint32_t *)cmnd->sense_buffer; |
| 2081 | |
| 2082 | if (!scsi_status && (resp_info & RESID_UNDER)) |
| 2083 | logit = LOG_FCP; |
| 2084 | |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2085 | lpfc_printf_vlog(vport, KERN_WARNING, logit, |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 2086 | "9024 FCP command x%x failed: x%x SNS x%x x%x " |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2087 | "Data: x%x x%x x%x x%x x%x\n", |
| 2088 | cmnd->cmnd[0], scsi_status, |
| 2089 | be32_to_cpu(*lp), be32_to_cpu(*(lp + 3)), resp_info, |
| 2090 | be32_to_cpu(fcprsp->rspResId), |
| 2091 | be32_to_cpu(fcprsp->rspSnsLen), |
| 2092 | be32_to_cpu(fcprsp->rspRspLen), |
| 2093 | fcprsp->rspInfo3); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2094 | |
| 2095 | if (resp_info & RSP_LEN_VALID) { |
| 2096 | rsplen = be32_to_cpu(fcprsp->rspRspLen); |
| 2097 | if ((rsplen != 0 && rsplen != 4 && rsplen != 8) || |
| 2098 | (fcprsp->rspInfo3 != RSP_NO_FAILURE)) { |
| 2099 | host_status = DID_ERROR; |
| 2100 | goto out; |
| 2101 | } |
| 2102 | } |
| 2103 | |
FUJITA Tomonori | a0b4f78 | 2007-06-17 19:56:39 -0500 | [diff] [blame] | 2104 | scsi_set_resid(cmnd, 0); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2105 | if (resp_info & RESID_UNDER) { |
FUJITA Tomonori | a0b4f78 | 2007-06-17 19:56:39 -0500 | [diff] [blame] | 2106 | scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId)); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2107 | |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2108 | lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 2109 | "9025 FCP Read Underrun, expected %d, " |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2110 | "residual %d Data: x%x x%x x%x\n", |
| 2111 | be32_to_cpu(fcpcmd->fcpDl), |
| 2112 | scsi_get_resid(cmnd), fcpi_parm, cmnd->cmnd[0], |
| 2113 | cmnd->underflow); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2114 | |
| 2115 | /* |
James Smart | 7054a60 | 2007-04-25 09:52:34 -0400 | [diff] [blame] | 2116 | * If there is an under run check if under run reported by |
| 2117 | * storage array is same as the under run reported by HBA. |
| 2118 | * If this is not same, there is a dropped frame. |
| 2119 | */ |
| 2120 | if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) && |
| 2121 | fcpi_parm && |
FUJITA Tomonori | a0b4f78 | 2007-06-17 19:56:39 -0500 | [diff] [blame] | 2122 | (scsi_get_resid(cmnd) != fcpi_parm)) { |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2123 | lpfc_printf_vlog(vport, KERN_WARNING, |
| 2124 | LOG_FCP | LOG_FCP_ERROR, |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 2125 | "9026 FCP Read Check Error " |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2126 | "and Underrun Data: x%x x%x x%x x%x\n", |
| 2127 | be32_to_cpu(fcpcmd->fcpDl), |
| 2128 | scsi_get_resid(cmnd), fcpi_parm, |
| 2129 | cmnd->cmnd[0]); |
FUJITA Tomonori | a0b4f78 | 2007-06-17 19:56:39 -0500 | [diff] [blame] | 2130 | scsi_set_resid(cmnd, scsi_bufflen(cmnd)); |
James Smart | 7054a60 | 2007-04-25 09:52:34 -0400 | [diff] [blame] | 2131 | host_status = DID_ERROR; |
| 2132 | } |
| 2133 | /* |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2134 | * The cmnd->underflow is the minimum number of bytes that must |
| 2135 | * be transfered for this command. Provided a sense condition |
| 2136 | * is not present, make sure the actual amount transferred is at |
| 2137 | * least the underflow value or fail. |
| 2138 | */ |
| 2139 | if (!(resp_info & SNS_LEN_VALID) && |
| 2140 | (scsi_status == SAM_STAT_GOOD) && |
FUJITA Tomonori | a0b4f78 | 2007-06-17 19:56:39 -0500 | [diff] [blame] | 2141 | (scsi_bufflen(cmnd) - scsi_get_resid(cmnd) |
| 2142 | < cmnd->underflow)) { |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2143 | lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 2144 | "9027 FCP command x%x residual " |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2145 | "underrun converted to error " |
| 2146 | "Data: x%x x%x x%x\n", |
James Smart | 66dbfbe | 2007-08-05 06:08:38 -0400 | [diff] [blame] | 2147 | cmnd->cmnd[0], scsi_bufflen(cmnd), |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2148 | scsi_get_resid(cmnd), cmnd->underflow); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2149 | host_status = DID_ERROR; |
| 2150 | } |
| 2151 | } else if (resp_info & RESID_OVER) { |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2152 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 2153 | "9028 FCP command x%x residual overrun error. " |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2154 | "Data: x%x x%x \n", cmnd->cmnd[0], |
| 2155 | scsi_bufflen(cmnd), scsi_get_resid(cmnd)); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2156 | host_status = DID_ERROR; |
| 2157 | |
| 2158 | /* |
| 2159 | * Check SLI validation that all the transfer was actually done |
| 2160 | * (fcpi_parm should be zero). Apply check only to reads. |
| 2161 | */ |
| 2162 | } else if ((scsi_status == SAM_STAT_GOOD) && fcpi_parm && |
| 2163 | (cmnd->sc_data_direction == DMA_FROM_DEVICE)) { |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2164 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR, |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 2165 | "9029 FCP Read Check Error Data: " |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2166 | "x%x x%x x%x x%x\n", |
| 2167 | be32_to_cpu(fcpcmd->fcpDl), |
| 2168 | be32_to_cpu(fcprsp->rspResId), |
| 2169 | fcpi_parm, cmnd->cmnd[0]); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2170 | host_status = DID_ERROR; |
FUJITA Tomonori | a0b4f78 | 2007-06-17 19:56:39 -0500 | [diff] [blame] | 2171 | scsi_set_resid(cmnd, scsi_bufflen(cmnd)); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2172 | } |
| 2173 | |
| 2174 | out: |
| 2175 | cmnd->result = ScsiResult(host_status, scsi_status); |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 2176 | lpfc_send_scsi_error_event(vport->phba, vport, lpfc_cmd, rsp_iocb); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2177 | } |
| 2178 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2179 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 2180 | * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2181 | * @phba: The Hba for which this call is being executed. |
| 2182 | * @pIocbIn: The command IOCBQ for the scsi cmnd. |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 2183 | * @pIocbOut: The response IOCBQ for the scsi cmnd. |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2184 | * |
| 2185 | * This routine assigns scsi command result by looking into response IOCB |
| 2186 | * status field appropriately. This routine handles QUEUE FULL condition as |
| 2187 | * well by ramping down device queue depth. |
| 2188 | **/ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2189 | static void |
| 2190 | lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, |
| 2191 | struct lpfc_iocbq *pIocbOut) |
| 2192 | { |
| 2193 | struct lpfc_scsi_buf *lpfc_cmd = |
| 2194 | (struct lpfc_scsi_buf *) pIocbIn->context1; |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 2195 | struct lpfc_vport *vport = pIocbIn->vport; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2196 | struct lpfc_rport_data *rdata = lpfc_cmd->rdata; |
| 2197 | struct lpfc_nodelist *pnode = rdata->pnode; |
| 2198 | struct scsi_cmnd *cmd = lpfc_cmd->pCmd; |
James.Smart@Emulex.Com | 445cf4f | 2005-11-28 11:42:38 -0500 | [diff] [blame] | 2199 | int result; |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2200 | struct scsi_device *tmp_sdev; |
James.Smart@Emulex.Com | 445cf4f | 2005-11-28 11:42:38 -0500 | [diff] [blame] | 2201 | int depth = 0; |
James Smart | fa61a54 | 2008-01-11 01:52:42 -0500 | [diff] [blame] | 2202 | unsigned long flags; |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 2203 | struct lpfc_fast_path_event *fast_path_evt; |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2204 | struct Scsi_Host *shost = cmd->device->host; |
| 2205 | uint32_t queue_depth, scsi_id; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2206 | |
| 2207 | lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4]; |
| 2208 | lpfc_cmd->status = pIocbOut->iocb.ulpStatus; |
James Smart | 109f6ed | 2008-12-04 22:39:08 -0500 | [diff] [blame] | 2209 | if (pnode && NLP_CHK_NODE_ACT(pnode)) |
| 2210 | atomic_dec(&pnode->cmd_pending); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2211 | |
| 2212 | if (lpfc_cmd->status) { |
| 2213 | if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT && |
| 2214 | (lpfc_cmd->result & IOERR_DRVR_MASK)) |
| 2215 | lpfc_cmd->status = IOSTAT_DRIVER_REJECT; |
| 2216 | else if (lpfc_cmd->status >= IOSTAT_CNT) |
| 2217 | lpfc_cmd->status = IOSTAT_DEFAULT; |
| 2218 | |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2219 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 2220 | "9030 FCP cmd x%x failed <%d/%d> " |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2221 | "status: x%x result: x%x Data: x%x x%x\n", |
| 2222 | cmd->cmnd[0], |
| 2223 | cmd->device ? cmd->device->id : 0xffff, |
| 2224 | cmd->device ? cmd->device->lun : 0xffff, |
| 2225 | lpfc_cmd->status, lpfc_cmd->result, |
| 2226 | pIocbOut->iocb.ulpContext, |
| 2227 | lpfc_cmd->cur_iocbq.iocb.ulpIoTag); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2228 | |
| 2229 | switch (lpfc_cmd->status) { |
| 2230 | case IOSTAT_FCP_RSP_ERROR: |
| 2231 | /* Call FCP RSP handler to determine result */ |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 2232 | lpfc_handle_fcp_err(vport, lpfc_cmd, pIocbOut); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2233 | break; |
| 2234 | case IOSTAT_NPORT_BSY: |
| 2235 | case IOSTAT_FABRIC_BSY: |
James Smart | 0f1f53a | 2008-08-24 21:50:18 -0400 | [diff] [blame] | 2236 | cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0); |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 2237 | fast_path_evt = lpfc_alloc_fast_evt(phba); |
| 2238 | if (!fast_path_evt) |
| 2239 | break; |
| 2240 | fast_path_evt->un.fabric_evt.event_type = |
| 2241 | FC_REG_FABRIC_EVENT; |
| 2242 | fast_path_evt->un.fabric_evt.subcategory = |
| 2243 | (lpfc_cmd->status == IOSTAT_NPORT_BSY) ? |
| 2244 | LPFC_EVENT_PORT_BUSY : LPFC_EVENT_FABRIC_BUSY; |
| 2245 | if (pnode && NLP_CHK_NODE_ACT(pnode)) { |
| 2246 | memcpy(&fast_path_evt->un.fabric_evt.wwpn, |
| 2247 | &pnode->nlp_portname, |
| 2248 | sizeof(struct lpfc_name)); |
| 2249 | memcpy(&fast_path_evt->un.fabric_evt.wwnn, |
| 2250 | &pnode->nlp_nodename, |
| 2251 | sizeof(struct lpfc_name)); |
| 2252 | } |
| 2253 | fast_path_evt->vport = vport; |
| 2254 | fast_path_evt->work_evt.evt = |
| 2255 | LPFC_EVT_FASTPATH_MGMT_EVT; |
| 2256 | spin_lock_irqsave(&phba->hbalock, flags); |
| 2257 | list_add_tail(&fast_path_evt->work_evt.evt_listp, |
| 2258 | &phba->work_list); |
| 2259 | spin_unlock_irqrestore(&phba->hbalock, flags); |
| 2260 | lpfc_worker_wake_up(phba); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2261 | break; |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 2262 | case IOSTAT_LOCAL_REJECT: |
James Smart | d7c255b | 2008-08-24 21:50:00 -0400 | [diff] [blame] | 2263 | if (lpfc_cmd->result == IOERR_INVALID_RPI || |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 2264 | lpfc_cmd->result == IOERR_NO_RESOURCES || |
James Smart | d7c255b | 2008-08-24 21:50:00 -0400 | [diff] [blame] | 2265 | lpfc_cmd->result == IOERR_ABORT_REQUESTED) { |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 2266 | cmd->result = ScsiResult(DID_REQUEUE, 0); |
James Smart | 58da1ff | 2008-04-07 10:15:56 -0400 | [diff] [blame] | 2267 | break; |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 2268 | } |
| 2269 | |
| 2270 | if ((lpfc_cmd->result == IOERR_RX_DMA_FAILED || |
| 2271 | lpfc_cmd->result == IOERR_TX_DMA_FAILED) && |
| 2272 | pIocbOut->iocb.unsli3.sli3_bg.bgstat) { |
| 2273 | if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) { |
| 2274 | /* |
| 2275 | * This is a response for a BG enabled |
| 2276 | * cmd. Parse BG error |
| 2277 | */ |
| 2278 | lpfc_parse_bg_err(phba, lpfc_cmd, |
| 2279 | pIocbOut); |
| 2280 | break; |
| 2281 | } else { |
| 2282 | lpfc_printf_vlog(vport, KERN_WARNING, |
| 2283 | LOG_BG, |
| 2284 | "9031 non-zero BGSTAT " |
| 2285 | "on unprotected cmd"); |
| 2286 | } |
| 2287 | } |
| 2288 | |
| 2289 | /* else: fall through */ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2290 | default: |
| 2291 | cmd->result = ScsiResult(DID_ERROR, 0); |
| 2292 | break; |
| 2293 | } |
| 2294 | |
James Smart | 58da1ff | 2008-04-07 10:15:56 -0400 | [diff] [blame] | 2295 | if (!pnode || !NLP_CHK_NODE_ACT(pnode) |
James.Smart@Emulex.Com | 19a7b4a | 2005-10-18 12:03:35 -0400 | [diff] [blame] | 2296 | || (pnode->nlp_state != NLP_STE_MAPPED_NODE)) |
James Smart | 0f1f53a | 2008-08-24 21:50:18 -0400 | [diff] [blame] | 2297 | cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, |
| 2298 | SAM_STAT_BUSY); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2299 | } else { |
| 2300 | cmd->result = ScsiResult(DID_OK, 0); |
| 2301 | } |
| 2302 | |
| 2303 | if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) { |
| 2304 | uint32_t *lp = (uint32_t *)cmd->sense_buffer; |
| 2305 | |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2306 | lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, |
| 2307 | "0710 Iodone <%d/%d> cmd %p, error " |
| 2308 | "x%x SNS x%x x%x Data: x%x x%x\n", |
| 2309 | cmd->device->id, cmd->device->lun, cmd, |
| 2310 | cmd->result, *lp, *(lp + 3), cmd->retries, |
| 2311 | scsi_get_resid(cmd)); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2312 | } |
| 2313 | |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 2314 | lpfc_update_stats(phba, lpfc_cmd); |
James.Smart@Emulex.Com | 445cf4f | 2005-11-28 11:42:38 -0500 | [diff] [blame] | 2315 | result = cmd->result; |
James Smart | 977b5a0 | 2008-09-07 11:52:04 -0400 | [diff] [blame] | 2316 | if (vport->cfg_max_scsicmpl_time && |
| 2317 | time_after(jiffies, lpfc_cmd->start_time + |
| 2318 | msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) { |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2319 | spin_lock_irqsave(shost->host_lock, flags); |
James Smart | 109f6ed | 2008-12-04 22:39:08 -0500 | [diff] [blame] | 2320 | if (pnode && NLP_CHK_NODE_ACT(pnode)) { |
| 2321 | if (pnode->cmd_qdepth > |
| 2322 | atomic_read(&pnode->cmd_pending) && |
| 2323 | (atomic_read(&pnode->cmd_pending) > |
| 2324 | LPFC_MIN_TGT_QDEPTH) && |
| 2325 | ((cmd->cmnd[0] == READ_10) || |
| 2326 | (cmd->cmnd[0] == WRITE_10))) |
| 2327 | pnode->cmd_qdepth = |
| 2328 | atomic_read(&pnode->cmd_pending); |
James Smart | 977b5a0 | 2008-09-07 11:52:04 -0400 | [diff] [blame] | 2329 | |
James Smart | 109f6ed | 2008-12-04 22:39:08 -0500 | [diff] [blame] | 2330 | pnode->last_change_time = jiffies; |
| 2331 | } |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2332 | spin_unlock_irqrestore(shost->host_lock, flags); |
James Smart | 109f6ed | 2008-12-04 22:39:08 -0500 | [diff] [blame] | 2333 | } else if (pnode && NLP_CHK_NODE_ACT(pnode)) { |
| 2334 | if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) && |
James Smart | 977b5a0 | 2008-09-07 11:52:04 -0400 | [diff] [blame] | 2335 | time_after(jiffies, pnode->last_change_time + |
James Smart | 109f6ed | 2008-12-04 22:39:08 -0500 | [diff] [blame] | 2336 | msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) { |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2337 | spin_lock_irqsave(shost->host_lock, flags); |
James Smart | 109f6ed | 2008-12-04 22:39:08 -0500 | [diff] [blame] | 2338 | pnode->cmd_qdepth += pnode->cmd_qdepth * |
| 2339 | LPFC_TGTQ_RAMPUP_PCENT / 100; |
| 2340 | if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH) |
| 2341 | pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH; |
| 2342 | pnode->last_change_time = jiffies; |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2343 | spin_unlock_irqrestore(shost->host_lock, flags); |
James Smart | 109f6ed | 2008-12-04 22:39:08 -0500 | [diff] [blame] | 2344 | } |
James Smart | 977b5a0 | 2008-09-07 11:52:04 -0400 | [diff] [blame] | 2345 | } |
| 2346 | |
James Smart | 1dcb58e | 2007-04-25 09:51:30 -0400 | [diff] [blame] | 2347 | lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2348 | |
| 2349 | /* The sdev is not guaranteed to be valid post scsi_done upcall. */ |
| 2350 | queue_depth = cmd->device->queue_depth; |
| 2351 | scsi_id = cmd->device->id; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2352 | cmd->scsi_done(cmd); |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 2353 | |
Jamie Wellnitz | b808608 | 2006-02-28 22:33:12 -0500 | [diff] [blame] | 2354 | if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { |
James Smart | fa61a54 | 2008-01-11 01:52:42 -0500 | [diff] [blame] | 2355 | /* |
| 2356 | * If there is a thread waiting for command completion |
| 2357 | * wake up the thread. |
| 2358 | */ |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2359 | spin_lock_irqsave(shost->host_lock, flags); |
James Smart | 495a714 | 2008-06-14 22:52:59 -0400 | [diff] [blame] | 2360 | lpfc_cmd->pCmd = NULL; |
James Smart | fa61a54 | 2008-01-11 01:52:42 -0500 | [diff] [blame] | 2361 | if (lpfc_cmd->waitq) |
| 2362 | wake_up(lpfc_cmd->waitq); |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2363 | spin_unlock_irqrestore(shost->host_lock, flags); |
Jamie Wellnitz | b808608 | 2006-02-28 22:33:12 -0500 | [diff] [blame] | 2364 | lpfc_release_scsi_buf(phba, lpfc_cmd); |
| 2365 | return; |
| 2366 | } |
| 2367 | |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 2368 | |
| 2369 | if (!result) |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2370 | lpfc_rampup_queue_depth(vport, queue_depth); |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 2371 | |
James Smart | 58da1ff | 2008-04-07 10:15:56 -0400 | [diff] [blame] | 2372 | if (!result && pnode && NLP_CHK_NODE_ACT(pnode) && |
James.Smart@Emulex.Com | 445cf4f | 2005-11-28 11:42:38 -0500 | [diff] [blame] | 2373 | ((jiffies - pnode->last_ramp_up_time) > |
| 2374 | LPFC_Q_RAMP_UP_INTERVAL * HZ) && |
| 2375 | ((jiffies - pnode->last_q_full_time) > |
| 2376 | LPFC_Q_RAMP_UP_INTERVAL * HZ) && |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2377 | (vport->cfg_lun_queue_depth > queue_depth)) { |
| 2378 | shost_for_each_device(tmp_sdev, shost) { |
James Smart | 3de2a65 | 2007-08-02 11:09:59 -0400 | [diff] [blame] | 2379 | if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){ |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2380 | if (tmp_sdev->id != scsi_id) |
James.Smart@Emulex.Com | 445cf4f | 2005-11-28 11:42:38 -0500 | [diff] [blame] | 2381 | continue; |
| 2382 | if (tmp_sdev->ordered_tags) |
| 2383 | scsi_adjust_queue_depth(tmp_sdev, |
| 2384 | MSG_ORDERED_TAG, |
| 2385 | tmp_sdev->queue_depth+1); |
| 2386 | else |
| 2387 | scsi_adjust_queue_depth(tmp_sdev, |
| 2388 | MSG_SIMPLE_TAG, |
| 2389 | tmp_sdev->queue_depth+1); |
| 2390 | |
| 2391 | pnode->last_ramp_up_time = jiffies; |
| 2392 | } |
| 2393 | } |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 2394 | lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode, |
| 2395 | 0xFFFFFFFF, |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2396 | queue_depth , queue_depth + 1); |
James.Smart@Emulex.Com | 445cf4f | 2005-11-28 11:42:38 -0500 | [diff] [blame] | 2397 | } |
| 2398 | |
| 2399 | /* |
| 2400 | * Check for queue full. If the lun is reporting queue full, then |
| 2401 | * back off the lun queue depth to prevent target overloads. |
| 2402 | */ |
James Smart | 58da1ff | 2008-04-07 10:15:56 -0400 | [diff] [blame] | 2403 | if (result == SAM_STAT_TASK_SET_FULL && pnode && |
| 2404 | NLP_CHK_NODE_ACT(pnode)) { |
James.Smart@Emulex.Com | 445cf4f | 2005-11-28 11:42:38 -0500 | [diff] [blame] | 2405 | pnode->last_q_full_time = jiffies; |
| 2406 | |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2407 | shost_for_each_device(tmp_sdev, shost) { |
| 2408 | if (tmp_sdev->id != scsi_id) |
James.Smart@Emulex.Com | 445cf4f | 2005-11-28 11:42:38 -0500 | [diff] [blame] | 2409 | continue; |
| 2410 | depth = scsi_track_queue_full(tmp_sdev, |
| 2411 | tmp_sdev->queue_depth - 1); |
| 2412 | } |
| 2413 | /* |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 2414 | * The queue depth cannot be lowered any more. |
James.Smart@Emulex.Com | 445cf4f | 2005-11-28 11:42:38 -0500 | [diff] [blame] | 2415 | * Modify the returned error code to store |
| 2416 | * the final depth value set by |
| 2417 | * scsi_track_queue_full. |
| 2418 | */ |
| 2419 | if (depth == -1) |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2420 | depth = shost->cmd_per_lun; |
James.Smart@Emulex.Com | 445cf4f | 2005-11-28 11:42:38 -0500 | [diff] [blame] | 2421 | |
| 2422 | if (depth) { |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2423 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, |
| 2424 | "0711 detected queue full - lun queue " |
| 2425 | "depth adjusted to %d.\n", depth); |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 2426 | lpfc_send_sdev_queuedepth_change_event(phba, vport, |
| 2427 | pnode, 0xFFFFFFFF, |
| 2428 | depth+1, depth); |
James.Smart@Emulex.Com | 445cf4f | 2005-11-28 11:42:38 -0500 | [diff] [blame] | 2429 | } |
| 2430 | } |
| 2431 | |
James Smart | fa61a54 | 2008-01-11 01:52:42 -0500 | [diff] [blame] | 2432 | /* |
| 2433 | * If there is a thread waiting for command completion |
| 2434 | * wake up the thread. |
| 2435 | */ |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2436 | spin_lock_irqsave(shost->host_lock, flags); |
James Smart | 495a714 | 2008-06-14 22:52:59 -0400 | [diff] [blame] | 2437 | lpfc_cmd->pCmd = NULL; |
James Smart | fa61a54 | 2008-01-11 01:52:42 -0500 | [diff] [blame] | 2438 | if (lpfc_cmd->waitq) |
| 2439 | wake_up(lpfc_cmd->waitq); |
James Smart | a257bf9 | 2009-04-06 18:48:10 -0400 | [diff] [blame] | 2440 | spin_unlock_irqrestore(shost->host_lock, flags); |
James Smart | fa61a54 | 2008-01-11 01:52:42 -0500 | [diff] [blame] | 2441 | |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 2442 | lpfc_release_scsi_buf(phba, lpfc_cmd); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2443 | } |
| 2444 | |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 2445 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 2446 | * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 2447 | * @data: A pointer to the immediate command data portion of the IOCB. |
| 2448 | * @fcp_cmnd: The FCP Command that is provided by the SCSI layer. |
| 2449 | * |
| 2450 | * The routine copies the entire FCP command from @fcp_cmnd to @data while |
| 2451 | * byte swapping the data to big endian format for transmission on the wire. |
| 2452 | **/ |
| 2453 | static void |
| 2454 | lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd) |
| 2455 | { |
| 2456 | int i, j; |
| 2457 | for (i = 0, j = 0; i < sizeof(struct fcp_cmnd); |
| 2458 | i += sizeof(uint32_t), j++) { |
| 2459 | ((uint32_t *)data)[j] = cpu_to_be32(((uint32_t *)fcp_cmnd)[j]); |
| 2460 | } |
| 2461 | } |
| 2462 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2463 | /** |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 2464 | * lpfc_scsi_prep_cmnd_s3 - Convert scsi cmnd to FCP infor unit for SLI3 dev |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2465 | * @vport: The virtual port for which this call is being executed. |
| 2466 | * @lpfc_cmd: The scsi command which needs to send. |
| 2467 | * @pnode: Pointer to lpfc_nodelist. |
| 2468 | * |
| 2469 | * This routine initializes fcp_cmnd and iocb data structure from scsi command |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 2470 | * to transfer for device with SLI3 interface spec. |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2471 | **/ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2472 | static void |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 2473 | lpfc_scsi_prep_cmnd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 2474 | struct lpfc_nodelist *pnode) |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2475 | { |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 2476 | struct lpfc_hba *phba = vport->phba; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2477 | struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd; |
| 2478 | struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd; |
| 2479 | IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb; |
| 2480 | struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq); |
| 2481 | int datadir = scsi_cmnd->sc_data_direction; |
James Smart | 7e2b19f | 2007-10-29 11:00:39 -0400 | [diff] [blame] | 2482 | char tag[2]; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2483 | |
James Smart | 58da1ff | 2008-04-07 10:15:56 -0400 | [diff] [blame] | 2484 | if (!pnode || !NLP_CHK_NODE_ACT(pnode)) |
| 2485 | return; |
| 2486 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2487 | lpfc_cmd->fcp_rsp->rspSnsLen = 0; |
James.Smart@Emulex.Com | 69859dc | 2005-08-10 15:02:37 -0400 | [diff] [blame] | 2488 | /* clear task management bits */ |
| 2489 | lpfc_cmd->fcp_cmnd->fcpCntl2 = 0; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2490 | |
James.Smart@Emulex.Com | 9188652 | 2005-08-10 15:03:09 -0400 | [diff] [blame] | 2491 | int_to_scsilun(lpfc_cmd->pCmd->device->lun, |
| 2492 | &lpfc_cmd->fcp_cmnd->fcp_lun); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2493 | |
| 2494 | memcpy(&fcp_cmnd->fcpCdb[0], scsi_cmnd->cmnd, 16); |
| 2495 | |
James Smart | 7e2b19f | 2007-10-29 11:00:39 -0400 | [diff] [blame] | 2496 | if (scsi_populate_tag_msg(scsi_cmnd, tag)) { |
| 2497 | switch (tag[0]) { |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2498 | case HEAD_OF_QUEUE_TAG: |
| 2499 | fcp_cmnd->fcpCntl1 = HEAD_OF_Q; |
| 2500 | break; |
| 2501 | case ORDERED_QUEUE_TAG: |
| 2502 | fcp_cmnd->fcpCntl1 = ORDERED_Q; |
| 2503 | break; |
| 2504 | default: |
| 2505 | fcp_cmnd->fcpCntl1 = SIMPLE_Q; |
| 2506 | break; |
| 2507 | } |
| 2508 | } else |
| 2509 | fcp_cmnd->fcpCntl1 = 0; |
| 2510 | |
| 2511 | /* |
| 2512 | * There are three possibilities here - use scatter-gather segment, use |
| 2513 | * the single mapping, or neither. Start the lpfc command prep by |
| 2514 | * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first |
| 2515 | * data bde entry. |
| 2516 | */ |
FUJITA Tomonori | a0b4f78 | 2007-06-17 19:56:39 -0500 | [diff] [blame] | 2517 | if (scsi_sg_count(scsi_cmnd)) { |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2518 | if (datadir == DMA_TO_DEVICE) { |
| 2519 | iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR; |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 2520 | if (phba->sli_rev < LPFC_SLI_REV4) { |
| 2521 | iocb_cmd->un.fcpi.fcpi_parm = 0; |
| 2522 | iocb_cmd->ulpPU = 0; |
| 2523 | } else |
| 2524 | iocb_cmd->ulpPU = PARM_READ_CHECK; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2525 | fcp_cmnd->fcpCntl3 = WRITE_DATA; |
| 2526 | phba->fc4OutputRequests++; |
| 2527 | } else { |
| 2528 | iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR; |
| 2529 | iocb_cmd->ulpPU = PARM_READ_CHECK; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2530 | fcp_cmnd->fcpCntl3 = READ_DATA; |
| 2531 | phba->fc4InputRequests++; |
| 2532 | } |
| 2533 | } else { |
| 2534 | iocb_cmd->ulpCommand = CMD_FCP_ICMND64_CR; |
| 2535 | iocb_cmd->un.fcpi.fcpi_parm = 0; |
| 2536 | iocb_cmd->ulpPU = 0; |
| 2537 | fcp_cmnd->fcpCntl3 = 0; |
| 2538 | phba->fc4ControlRequests++; |
| 2539 | } |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 2540 | if (phba->sli_rev == 3 && |
| 2541 | !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 2542 | lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2543 | /* |
| 2544 | * Finish initializing those IOCB fields that are independent |
| 2545 | * of the scsi_cmnd request_buffer |
| 2546 | */ |
| 2547 | piocbq->iocb.ulpContext = pnode->nlp_rpi; |
| 2548 | if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE) |
| 2549 | piocbq->iocb.ulpFCP2Rcvy = 1; |
James Smart | 0937282 | 2008-01-11 01:52:54 -0500 | [diff] [blame] | 2550 | else |
| 2551 | piocbq->iocb.ulpFCP2Rcvy = 0; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2552 | |
| 2553 | piocbq->iocb.ulpClass = (pnode->nlp_fcp_info & 0x0f); |
| 2554 | piocbq->context1 = lpfc_cmd; |
| 2555 | piocbq->iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl; |
| 2556 | piocbq->iocb.ulpTimeout = lpfc_cmd->timeout; |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 2557 | piocbq->vport = vport; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2558 | } |
| 2559 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2560 | /** |
James Smart | da0436e | 2009-05-22 14:51:39 -0400 | [diff] [blame] | 2561 | * lpfc_scsi_prep_cmnd_s4 - Convert scsi cmnd to FCP infor unit for SLI4 dev |
| 2562 | * @vport: The virtual port for which this call is being executed. |
| 2563 | * @lpfc_cmd: The scsi command which needs to send. |
| 2564 | * @pnode: Pointer to lpfc_nodelist. |
| 2565 | * |
| 2566 | * This routine initializes fcp_cmnd and iocb data structure from scsi command |
| 2567 | * to transfer for device with SLI4 interface spec. |
| 2568 | **/ |
| 2569 | static void |
| 2570 | lpfc_scsi_prep_cmnd_s4(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, |
| 2571 | struct lpfc_nodelist *pnode) |
| 2572 | { |
| 2573 | /* |
| 2574 | * The prep cmnd routines do not touch the sgl or its |
| 2575 | * entries. We may not have to do anything different. |
| 2576 | * I will leave this function in place until we can |
| 2577 | * run some IO through the driver and determine if changes |
| 2578 | * are needed. |
| 2579 | */ |
| 2580 | return lpfc_scsi_prep_cmnd_s3(vport, lpfc_cmd, pnode); |
| 2581 | } |
| 2582 | |
| 2583 | /** |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 2584 | * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit |
| 2585 | * @vport: The virtual port for which this call is being executed. |
| 2586 | * @lpfc_cmd: The scsi command which needs to send. |
| 2587 | * @pnode: Pointer to lpfc_nodelist. |
| 2588 | * |
| 2589 | * This routine wraps the actual convert SCSI cmnd function pointer from |
| 2590 | * the lpfc_hba struct. |
| 2591 | **/ |
| 2592 | static inline void |
| 2593 | lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, |
| 2594 | struct lpfc_nodelist *pnode) |
| 2595 | { |
| 2596 | vport->phba->lpfc_scsi_prep_cmnd(vport, lpfc_cmd, pnode); |
| 2597 | } |
| 2598 | |
| 2599 | /** |
| 2600 | * lpfc_scsi_prep_task_mgmt_cmnd_s3 - Convert SLI3 scsi TM cmd to FCP info unit |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2601 | * @vport: The virtual port for which this call is being executed. |
| 2602 | * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. |
| 2603 | * @lun: Logical unit number. |
| 2604 | * @task_mgmt_cmd: SCSI task management command. |
| 2605 | * |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 2606 | * This routine creates FCP information unit corresponding to @task_mgmt_cmd |
| 2607 | * for device with SLI-3 interface spec. |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2608 | * |
| 2609 | * Return codes: |
| 2610 | * 0 - Error |
| 2611 | * 1 - Success |
| 2612 | **/ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2613 | static int |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 2614 | lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport, |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2615 | struct lpfc_scsi_buf *lpfc_cmd, |
James Smart | 420b630d | 2006-07-06 15:50:16 -0400 | [diff] [blame] | 2616 | unsigned int lun, |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2617 | uint8_t task_mgmt_cmd) |
| 2618 | { |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2619 | struct lpfc_iocbq *piocbq; |
| 2620 | IOCB_t *piocb; |
| 2621 | struct fcp_cmnd *fcp_cmnd; |
James Smart | 0b18ac4 | 2006-05-01 21:50:40 -0400 | [diff] [blame] | 2622 | struct lpfc_rport_data *rdata = lpfc_cmd->rdata; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2623 | struct lpfc_nodelist *ndlp = rdata->pnode; |
| 2624 | |
James Smart | 58da1ff | 2008-04-07 10:15:56 -0400 | [diff] [blame] | 2625 | if (!ndlp || !NLP_CHK_NODE_ACT(ndlp) || |
| 2626 | ndlp->nlp_state != NLP_STE_MAPPED_NODE) |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2627 | return 0; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2628 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2629 | piocbq = &(lpfc_cmd->cur_iocbq); |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 2630 | piocbq->vport = vport; |
| 2631 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2632 | piocb = &piocbq->iocb; |
| 2633 | |
| 2634 | fcp_cmnd = lpfc_cmd->fcp_cmnd; |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 2635 | /* Clear out any old data in the FCP command area */ |
| 2636 | memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd)); |
| 2637 | int_to_scsilun(lun, &fcp_cmnd->fcp_lun); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2638 | fcp_cmnd->fcpCntl2 = task_mgmt_cmd; |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 2639 | if (vport->phba->sli_rev == 3 && |
| 2640 | !(vport->phba->sli3_options & LPFC_SLI3_BG_ENABLED)) |
James Smart | 34b02dc | 2008-08-24 21:49:55 -0400 | [diff] [blame] | 2641 | lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2642 | piocb->ulpCommand = CMD_FCP_ICMND64_CR; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2643 | piocb->ulpContext = ndlp->nlp_rpi; |
| 2644 | if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) { |
| 2645 | piocb->ulpFCP2Rcvy = 1; |
| 2646 | } |
| 2647 | piocb->ulpClass = (ndlp->nlp_fcp_info & 0x0f); |
| 2648 | |
| 2649 | /* ulpTimeout is only one byte */ |
| 2650 | if (lpfc_cmd->timeout > 0xff) { |
| 2651 | /* |
| 2652 | * Do not timeout the command at the firmware level. |
| 2653 | * The driver will provide the timeout mechanism. |
| 2654 | */ |
| 2655 | piocb->ulpTimeout = 0; |
| 2656 | } else { |
| 2657 | piocb->ulpTimeout = lpfc_cmd->timeout; |
| 2658 | } |
| 2659 | |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 2660 | return 1; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2661 | } |
| 2662 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2663 | /** |
James Smart | da0436e | 2009-05-22 14:51:39 -0400 | [diff] [blame] | 2664 | * lpfc_scsi_prep_task_mgmt_cmnd_s4 - Convert SLI4 scsi TM cmd to FCP info unit |
| 2665 | * @vport: The virtual port for which this call is being executed. |
| 2666 | * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. |
| 2667 | * @lun: Logical unit number. |
| 2668 | * @task_mgmt_cmd: SCSI task management command. |
| 2669 | * |
| 2670 | * This routine creates FCP information unit corresponding to @task_mgmt_cmd |
| 2671 | * for device with SLI-4 interface spec. |
| 2672 | * |
| 2673 | * Return codes: |
| 2674 | * 0 - Error |
| 2675 | * 1 - Success |
| 2676 | **/ |
| 2677 | static int |
| 2678 | lpfc_scsi_prep_task_mgmt_cmd_s4(struct lpfc_vport *vport, |
| 2679 | struct lpfc_scsi_buf *lpfc_cmd, |
| 2680 | unsigned int lun, |
| 2681 | uint8_t task_mgmt_cmd) |
| 2682 | { |
| 2683 | /* |
| 2684 | * The prep cmnd routines do not touch the sgl or its |
| 2685 | * entries. We may not have to do anything different. |
| 2686 | * I will leave this function in place until we can |
| 2687 | * run some IO through the driver and determine if changes |
| 2688 | * are needed. |
| 2689 | */ |
| 2690 | return lpfc_scsi_prep_task_mgmt_cmd_s3(vport, lpfc_cmd, lun, |
| 2691 | task_mgmt_cmd); |
| 2692 | } |
| 2693 | |
| 2694 | /** |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 2695 | * lpfc_scsi_prep_task_mgmt_cmnd - Wrapper func convert scsi TM cmd to FCP info |
| 2696 | * @vport: The virtual port for which this call is being executed. |
| 2697 | * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. |
| 2698 | * @lun: Logical unit number. |
| 2699 | * @task_mgmt_cmd: SCSI task management command. |
| 2700 | * |
| 2701 | * This routine wraps the actual convert SCSI TM to FCP information unit |
| 2702 | * function pointer from the lpfc_hba struct. |
| 2703 | * |
| 2704 | * Return codes: |
| 2705 | * 0 - Error |
| 2706 | * 1 - Success |
| 2707 | **/ |
| 2708 | static inline int |
| 2709 | lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport, |
| 2710 | struct lpfc_scsi_buf *lpfc_cmd, |
| 2711 | unsigned int lun, |
| 2712 | uint8_t task_mgmt_cmd) |
| 2713 | { |
| 2714 | struct lpfc_hba *phba = vport->phba; |
| 2715 | |
| 2716 | return phba->lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun, |
| 2717 | task_mgmt_cmd); |
| 2718 | } |
| 2719 | |
| 2720 | /** |
| 2721 | * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table |
| 2722 | * @phba: The hba struct for which this call is being executed. |
| 2723 | * @dev_grp: The HBA PCI-Device group number. |
| 2724 | * |
| 2725 | * This routine sets up the SCSI interface API function jump table in @phba |
| 2726 | * struct. |
| 2727 | * Returns: 0 - success, -ENODEV - failure. |
| 2728 | **/ |
| 2729 | int |
| 2730 | lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp) |
| 2731 | { |
| 2732 | |
| 2733 | switch (dev_grp) { |
| 2734 | case LPFC_PCI_DEV_LP: |
| 2735 | phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3; |
| 2736 | phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3; |
| 2737 | phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s3; |
| 2738 | phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s3; |
| 2739 | phba->lpfc_scsi_prep_task_mgmt_cmd = |
| 2740 | lpfc_scsi_prep_task_mgmt_cmd_s3; |
| 2741 | phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3; |
| 2742 | break; |
James Smart | da0436e | 2009-05-22 14:51:39 -0400 | [diff] [blame] | 2743 | case LPFC_PCI_DEV_OC: |
| 2744 | phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4; |
| 2745 | phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4; |
| 2746 | phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s4; |
| 2747 | phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s4; |
| 2748 | phba->lpfc_scsi_prep_task_mgmt_cmd = |
| 2749 | lpfc_scsi_prep_task_mgmt_cmd_s4; |
| 2750 | phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4; |
| 2751 | break; |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 2752 | default: |
| 2753 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
| 2754 | "1418 Invalid HBA PCI-device group: 0x%x\n", |
| 2755 | dev_grp); |
| 2756 | return -ENODEV; |
| 2757 | break; |
| 2758 | } |
| 2759 | phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf; |
| 2760 | phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth; |
| 2761 | return 0; |
| 2762 | } |
| 2763 | |
| 2764 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 2765 | * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2766 | * @phba: The Hba for which this call is being executed. |
| 2767 | * @cmdiocbq: Pointer to lpfc_iocbq data structure. |
| 2768 | * @rspiocbq: Pointer to lpfc_iocbq data structure. |
| 2769 | * |
| 2770 | * This routine is IOCB completion routine for device reset and target reset |
| 2771 | * routine. This routine release scsi buffer associated with lpfc_cmd. |
| 2772 | **/ |
James Smart | 7054a60 | 2007-04-25 09:52:34 -0400 | [diff] [blame] | 2773 | static void |
| 2774 | lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba, |
| 2775 | struct lpfc_iocbq *cmdiocbq, |
| 2776 | struct lpfc_iocbq *rspiocbq) |
| 2777 | { |
| 2778 | struct lpfc_scsi_buf *lpfc_cmd = |
| 2779 | (struct lpfc_scsi_buf *) cmdiocbq->context1; |
| 2780 | if (lpfc_cmd) |
| 2781 | lpfc_release_scsi_buf(phba, lpfc_cmd); |
| 2782 | return; |
| 2783 | } |
| 2784 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2785 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 2786 | * lpfc_scsi_tgt_reset - Target reset handler |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2787 | * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure |
| 2788 | * @vport: The virtual port for which this call is being executed. |
| 2789 | * @tgt_id: Target ID. |
| 2790 | * @lun: Lun number. |
| 2791 | * @rdata: Pointer to lpfc_rport_data. |
| 2792 | * |
| 2793 | * This routine issues a TARGET RESET iocb to reset a target with @tgt_id ID. |
| 2794 | * |
| 2795 | * Return Code: |
| 2796 | * 0x2003 - Error |
| 2797 | * 0x2002 - Success. |
| 2798 | **/ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2799 | static int |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 2800 | lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport, |
James Smart | 420b630d | 2006-07-06 15:50:16 -0400 | [diff] [blame] | 2801 | unsigned tgt_id, unsigned int lun, |
| 2802 | struct lpfc_rport_data *rdata) |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2803 | { |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 2804 | struct lpfc_hba *phba = vport->phba; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2805 | struct lpfc_iocbq *iocbq; |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 2806 | struct lpfc_iocbq *iocbqrsp; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2807 | int ret; |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 2808 | int status; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2809 | |
James Smart | 58da1ff | 2008-04-07 10:15:56 -0400 | [diff] [blame] | 2810 | if (!rdata->pnode || !NLP_CHK_NODE_ACT(rdata->pnode)) |
James Smart | f560351 | 2006-12-02 13:35:43 -0500 | [diff] [blame] | 2811 | return FAILED; |
| 2812 | |
James Smart | 0b18ac4 | 2006-05-01 21:50:40 -0400 | [diff] [blame] | 2813 | lpfc_cmd->rdata = rdata; |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 2814 | status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun, |
James Smart | 420b630d | 2006-07-06 15:50:16 -0400 | [diff] [blame] | 2815 | FCP_TARGET_RESET); |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 2816 | if (!status) |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2817 | return FAILED; |
| 2818 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2819 | iocbq = &lpfc_cmd->cur_iocbq; |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 2820 | iocbqrsp = lpfc_sli_get_iocbq(phba); |
| 2821 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2822 | if (!iocbqrsp) |
| 2823 | return FAILED; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2824 | |
James Smart | 0b18ac4 | 2006-05-01 21:50:40 -0400 | [diff] [blame] | 2825 | /* Issue Target Reset to TGT <num> */ |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2826 | lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, |
| 2827 | "0702 Issue Target Reset to TGT %d Data: x%x x%x\n", |
| 2828 | tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag); |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 2829 | status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING, |
| 2830 | iocbq, iocbqrsp, lpfc_cmd->timeout); |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 2831 | if (status != IOCB_SUCCESS) { |
| 2832 | if (status == IOCB_TIMEDOUT) { |
James Smart | 7054a60 | 2007-04-25 09:52:34 -0400 | [diff] [blame] | 2833 | iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl; |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 2834 | ret = TIMEOUT_ERROR; |
| 2835 | } else |
| 2836 | ret = FAILED; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2837 | lpfc_cmd->status = IOSTAT_DRIVER_REJECT; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2838 | } else { |
| 2839 | ret = SUCCESS; |
| 2840 | lpfc_cmd->result = iocbqrsp->iocb.un.ulpWord[4]; |
| 2841 | lpfc_cmd->status = iocbqrsp->iocb.ulpStatus; |
| 2842 | if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT && |
| 2843 | (lpfc_cmd->result & IOERR_DRVR_MASK)) |
| 2844 | lpfc_cmd->status = IOSTAT_DRIVER_REJECT; |
| 2845 | } |
| 2846 | |
James Bottomley | 604a3e3 | 2005-10-29 10:28:33 -0500 | [diff] [blame] | 2847 | lpfc_sli_release_iocbq(phba, iocbqrsp); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2848 | return ret; |
| 2849 | } |
| 2850 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2851 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 2852 | * lpfc_info - Info entry point of scsi_host_template data structure |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2853 | * @host: The scsi host for which this call is being executed. |
| 2854 | * |
| 2855 | * This routine provides module information about hba. |
| 2856 | * |
| 2857 | * Reutrn code: |
| 2858 | * Pointer to char - Success. |
| 2859 | **/ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2860 | const char * |
| 2861 | lpfc_info(struct Scsi_Host *host) |
| 2862 | { |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 2863 | struct lpfc_vport *vport = (struct lpfc_vport *) host->hostdata; |
| 2864 | struct lpfc_hba *phba = vport->phba; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2865 | int len; |
| 2866 | static char lpfcinfobuf[384]; |
| 2867 | |
| 2868 | memset(lpfcinfobuf,0,384); |
| 2869 | if (phba && phba->pcidev){ |
| 2870 | strncpy(lpfcinfobuf, phba->ModelDesc, 256); |
| 2871 | len = strlen(lpfcinfobuf); |
| 2872 | snprintf(lpfcinfobuf + len, |
| 2873 | 384-len, |
| 2874 | " on PCI bus %02x device %02x irq %d", |
| 2875 | phba->pcidev->bus->number, |
| 2876 | phba->pcidev->devfn, |
| 2877 | phba->pcidev->irq); |
| 2878 | len = strlen(lpfcinfobuf); |
| 2879 | if (phba->Port[0]) { |
| 2880 | snprintf(lpfcinfobuf + len, |
| 2881 | 384-len, |
| 2882 | " port %s", |
| 2883 | phba->Port); |
| 2884 | } |
| 2885 | } |
| 2886 | return lpfcinfobuf; |
| 2887 | } |
| 2888 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2889 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 2890 | * lpfc_poll_rearm_time - Routine to modify fcp_poll timer of hba |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2891 | * @phba: The Hba for which this call is being executed. |
| 2892 | * |
| 2893 | * This routine modifies fcp_poll_timer field of @phba by cfg_poll_tmo. |
| 2894 | * The default value of cfg_poll_tmo is 10 milliseconds. |
| 2895 | **/ |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 2896 | static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba) |
| 2897 | { |
| 2898 | unsigned long poll_tmo_expires = |
| 2899 | (jiffies + msecs_to_jiffies(phba->cfg_poll_tmo)); |
| 2900 | |
| 2901 | if (phba->sli.ring[LPFC_FCP_RING].txcmplq_cnt) |
| 2902 | mod_timer(&phba->fcp_poll_timer, |
| 2903 | poll_tmo_expires); |
| 2904 | } |
| 2905 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2906 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 2907 | * lpfc_poll_start_timer - Routine to start fcp_poll_timer of HBA |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2908 | * @phba: The Hba for which this call is being executed. |
| 2909 | * |
| 2910 | * This routine starts the fcp_poll_timer of @phba. |
| 2911 | **/ |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 2912 | void lpfc_poll_start_timer(struct lpfc_hba * phba) |
| 2913 | { |
| 2914 | lpfc_poll_rearm_timer(phba); |
| 2915 | } |
| 2916 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2917 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 2918 | * lpfc_poll_timeout - Restart polling timer |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2919 | * @ptr: Map to lpfc_hba data structure pointer. |
| 2920 | * |
| 2921 | * This routine restarts fcp_poll timer, when FCP ring polling is enable |
| 2922 | * and FCP Ring interrupt is disable. |
| 2923 | **/ |
| 2924 | |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 2925 | void lpfc_poll_timeout(unsigned long ptr) |
| 2926 | { |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 2927 | struct lpfc_hba *phba = (struct lpfc_hba *) ptr; |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 2928 | |
| 2929 | if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { |
| 2930 | lpfc_sli_poll_fcp_ring (phba); |
| 2931 | if (phba->cfg_poll & DISABLE_FCP_RING_INT) |
| 2932 | lpfc_poll_rearm_timer(phba); |
| 2933 | } |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 2934 | } |
| 2935 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2936 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 2937 | * lpfc_queuecommand - scsi_host_template queuecommand entry point |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 2938 | * @cmnd: Pointer to scsi_cmnd data structure. |
| 2939 | * @done: Pointer to done routine. |
| 2940 | * |
| 2941 | * Driver registers this routine to scsi midlayer to submit a @cmd to process. |
| 2942 | * This routine prepares an IOCB from scsi command and provides to firmware. |
| 2943 | * The @done callback is invoked after driver finished processing the command. |
| 2944 | * |
| 2945 | * Return value : |
| 2946 | * 0 - Success |
| 2947 | * SCSI_MLQUEUE_HOST_BUSY - Block all devices served by this host temporarily. |
| 2948 | **/ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2949 | static int |
| 2950 | lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) |
| 2951 | { |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 2952 | struct Scsi_Host *shost = cmnd->device->host; |
| 2953 | struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; |
| 2954 | struct lpfc_hba *phba = vport->phba; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2955 | struct lpfc_rport_data *rdata = cmnd->device->hostdata; |
| 2956 | struct lpfc_nodelist *ndlp = rdata->pnode; |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 2957 | struct lpfc_scsi_buf *lpfc_cmd; |
James.Smart@Emulex.Com | 19a7b4a | 2005-10-18 12:03:35 -0400 | [diff] [blame] | 2958 | struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device)); |
James.Smart@Emulex.Com | 19a7b4a | 2005-10-18 12:03:35 -0400 | [diff] [blame] | 2959 | int err; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2960 | |
James.Smart@Emulex.Com | 19a7b4a | 2005-10-18 12:03:35 -0400 | [diff] [blame] | 2961 | err = fc_remote_port_chkready(rport); |
| 2962 | if (err) { |
| 2963 | cmnd->result = err; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2964 | goto out_fail_command; |
| 2965 | } |
| 2966 | |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 2967 | if (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) && |
| 2968 | scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) { |
| 2969 | |
| 2970 | printk(KERN_ERR "BLKGRD ERROR: rcvd protected cmd:%02x op:%02x " |
| 2971 | "str=%s without registering for BlockGuard - " |
| 2972 | "Rejecting command\n", |
| 2973 | cmnd->cmnd[0], scsi_get_prot_op(cmnd), |
| 2974 | dif_op_str[scsi_get_prot_op(cmnd)]); |
| 2975 | goto out_fail_command; |
| 2976 | } |
| 2977 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2978 | /* |
James.Smart@Emulex.Com | 19a7b4a | 2005-10-18 12:03:35 -0400 | [diff] [blame] | 2979 | * Catch race where our node has transitioned, but the |
| 2980 | * transport is still transitioning. |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2981 | */ |
James Smart | b522d7d | 2008-09-07 11:51:56 -0400 | [diff] [blame] | 2982 | if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { |
| 2983 | cmnd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0); |
| 2984 | goto out_fail_command; |
| 2985 | } |
James Smart | 109f6ed | 2008-12-04 22:39:08 -0500 | [diff] [blame] | 2986 | if (vport->cfg_max_scsicmpl_time && |
| 2987 | (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth)) |
James Smart | 977b5a0 | 2008-09-07 11:52:04 -0400 | [diff] [blame] | 2988 | goto out_host_busy; |
Mike Christie | a93ce02 | 2008-08-17 15:24:41 -0500 | [diff] [blame] | 2989 | |
James Smart | ed95768 | 2007-06-17 19:56:37 -0500 | [diff] [blame] | 2990 | lpfc_cmd = lpfc_get_scsi_buf(phba); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2991 | if (lpfc_cmd == NULL) { |
James Smart | eaf15d5 | 2008-12-04 22:39:29 -0500 | [diff] [blame] | 2992 | lpfc_rampdown_queue_depth(phba); |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 2993 | |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 2994 | lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, |
| 2995 | "0707 driver's buffer pool is empty, " |
| 2996 | "IO busied\n"); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 2997 | goto out_host_busy; |
| 2998 | } |
| 2999 | |
| 3000 | /* |
| 3001 | * Store the midlayer's command structure for the completion phase |
| 3002 | * and complete the command initialization. |
| 3003 | */ |
| 3004 | lpfc_cmd->pCmd = cmnd; |
| 3005 | lpfc_cmd->rdata = rdata; |
| 3006 | lpfc_cmd->timeout = 0; |
James Smart | 977b5a0 | 2008-09-07 11:52:04 -0400 | [diff] [blame] | 3007 | lpfc_cmd->start_time = jiffies; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3008 | cmnd->host_scribble = (unsigned char *)lpfc_cmd; |
| 3009 | cmnd->scsi_done = done; |
| 3010 | |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 3011 | if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) { |
| 3012 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, |
| 3013 | "9033 BLKGRD: rcvd protected cmd:%02x op:%02x " |
| 3014 | "str=%s\n", |
| 3015 | cmnd->cmnd[0], scsi_get_prot_op(cmnd), |
| 3016 | dif_op_str[scsi_get_prot_op(cmnd)]); |
| 3017 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, |
| 3018 | "9034 BLKGRD: CDB: %02x %02x %02x %02x %02x " |
| 3019 | "%02x %02x %02x %02x %02x \n", |
| 3020 | cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2], |
| 3021 | cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5], |
| 3022 | cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8], |
| 3023 | cmnd->cmnd[9]); |
| 3024 | if (cmnd->cmnd[0] == READ_10) |
| 3025 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, |
| 3026 | "9035 BLKGRD: READ @ sector %llu, " |
| 3027 | "count %lu\n", |
James Smart | 87b5c32 | 2008-12-16 10:34:09 -0500 | [diff] [blame] | 3028 | (unsigned long long)scsi_get_lba(cmnd), |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 3029 | cmnd->request->nr_sectors); |
| 3030 | else if (cmnd->cmnd[0] == WRITE_10) |
| 3031 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, |
| 3032 | "9036 BLKGRD: WRITE @ sector %llu, " |
| 3033 | "count %lu cmd=%p\n", |
James Smart | 87b5c32 | 2008-12-16 10:34:09 -0500 | [diff] [blame] | 3034 | (unsigned long long)scsi_get_lba(cmnd), |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 3035 | cmnd->request->nr_sectors, |
| 3036 | cmnd); |
| 3037 | |
| 3038 | err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd); |
| 3039 | } else { |
| 3040 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, |
| 3041 | "9038 BLKGRD: rcvd unprotected cmd:%02x op:%02x" |
| 3042 | " str=%s\n", |
| 3043 | cmnd->cmnd[0], scsi_get_prot_op(cmnd), |
| 3044 | dif_op_str[scsi_get_prot_op(cmnd)]); |
| 3045 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, |
| 3046 | "9039 BLKGRD: CDB: %02x %02x %02x %02x %02x " |
| 3047 | "%02x %02x %02x %02x %02x \n", |
| 3048 | cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2], |
| 3049 | cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5], |
| 3050 | cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8], |
| 3051 | cmnd->cmnd[9]); |
| 3052 | if (cmnd->cmnd[0] == READ_10) |
| 3053 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, |
| 3054 | "9040 dbg: READ @ sector %llu, " |
James Smart | 87b5c32 | 2008-12-16 10:34:09 -0500 | [diff] [blame] | 3055 | "count %lu\n", |
| 3056 | (unsigned long long)scsi_get_lba(cmnd), |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 3057 | cmnd->request->nr_sectors); |
| 3058 | else if (cmnd->cmnd[0] == WRITE_10) |
| 3059 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, |
| 3060 | "9041 dbg: WRITE @ sector %llu, " |
| 3061 | "count %lu cmd=%p\n", |
James Smart | 87b5c32 | 2008-12-16 10:34:09 -0500 | [diff] [blame] | 3062 | (unsigned long long)scsi_get_lba(cmnd), |
James Smart | e2a0a9d | 2008-12-04 22:40:02 -0500 | [diff] [blame] | 3063 | cmnd->request->nr_sectors, cmnd); |
| 3064 | else |
| 3065 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, |
| 3066 | "9042 dbg: parser not implemented\n"); |
| 3067 | err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd); |
| 3068 | } |
| 3069 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3070 | if (err) |
| 3071 | goto out_host_busy_free_buf; |
| 3072 | |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 3073 | lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3074 | |
James Smart | 977b5a0 | 2008-09-07 11:52:04 -0400 | [diff] [blame] | 3075 | atomic_inc(&ndlp->cmd_pending); |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 3076 | err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 3077 | &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB); |
James Smart | eaf15d5 | 2008-12-04 22:39:29 -0500 | [diff] [blame] | 3078 | if (err) { |
| 3079 | atomic_dec(&ndlp->cmd_pending); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3080 | goto out_host_busy_free_buf; |
James Smart | eaf15d5 | 2008-12-04 22:39:29 -0500 | [diff] [blame] | 3081 | } |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 3082 | if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { |
| 3083 | lpfc_sli_poll_fcp_ring(phba); |
| 3084 | if (phba->cfg_poll & DISABLE_FCP_RING_INT) |
| 3085 | lpfc_poll_rearm_timer(phba); |
| 3086 | } |
| 3087 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3088 | return 0; |
| 3089 | |
| 3090 | out_host_busy_free_buf: |
James Smart | bcf4dbf | 2006-07-06 15:50:08 -0400 | [diff] [blame] | 3091 | lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3092 | lpfc_release_scsi_buf(phba, lpfc_cmd); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3093 | out_host_busy: |
| 3094 | return SCSI_MLQUEUE_HOST_BUSY; |
| 3095 | |
| 3096 | out_fail_command: |
| 3097 | done(cmnd); |
| 3098 | return 0; |
| 3099 | } |
| 3100 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3101 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 3102 | * lpfc_block_error_handler - Routine to block error handler |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3103 | * @cmnd: Pointer to scsi_cmnd data structure. |
| 3104 | * |
| 3105 | * This routine blocks execution till fc_rport state is not FC_PORSTAT_BLCOEKD. |
| 3106 | **/ |
James Smart | a90f568 | 2006-08-17 11:58:04 -0400 | [diff] [blame] | 3107 | static void |
| 3108 | lpfc_block_error_handler(struct scsi_cmnd *cmnd) |
| 3109 | { |
| 3110 | struct Scsi_Host *shost = cmnd->device->host; |
| 3111 | struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device)); |
| 3112 | |
| 3113 | spin_lock_irq(shost->host_lock); |
| 3114 | while (rport->port_state == FC_PORTSTATE_BLOCKED) { |
| 3115 | spin_unlock_irq(shost->host_lock); |
| 3116 | msleep(1000); |
| 3117 | spin_lock_irq(shost->host_lock); |
| 3118 | } |
| 3119 | spin_unlock_irq(shost->host_lock); |
| 3120 | return; |
| 3121 | } |
James.Smart@Emulex.Com | 63c59c3 | 2005-11-28 11:41:53 -0500 | [diff] [blame] | 3122 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3123 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 3124 | * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3125 | * @cmnd: Pointer to scsi_cmnd data structure. |
| 3126 | * |
| 3127 | * This routine aborts @cmnd pending in base driver. |
| 3128 | * |
| 3129 | * Return code : |
| 3130 | * 0x2003 - Error |
| 3131 | * 0x2002 - Success |
| 3132 | **/ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3133 | static int |
James.Smart@Emulex.Com | 63c59c3 | 2005-11-28 11:41:53 -0500 | [diff] [blame] | 3134 | lpfc_abort_handler(struct scsi_cmnd *cmnd) |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3135 | { |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 3136 | struct Scsi_Host *shost = cmnd->device->host; |
| 3137 | struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; |
| 3138 | struct lpfc_hba *phba = vport->phba; |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3139 | struct lpfc_iocbq *iocb; |
| 3140 | struct lpfc_iocbq *abtsiocb; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3141 | struct lpfc_scsi_buf *lpfc_cmd; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3142 | IOCB_t *cmd, *icmd; |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3143 | int ret = SUCCESS; |
James Smart | fa61a54 | 2008-01-11 01:52:42 -0500 | [diff] [blame] | 3144 | DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq); |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3145 | |
James Smart | a90f568 | 2006-08-17 11:58:04 -0400 | [diff] [blame] | 3146 | lpfc_block_error_handler(cmnd); |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3147 | lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble; |
| 3148 | BUG_ON(!lpfc_cmd); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3149 | |
| 3150 | /* |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3151 | * If pCmd field of the corresponding lpfc_scsi_buf structure |
| 3152 | * points to a different SCSI command, then the driver has |
| 3153 | * already completed this command, but the midlayer did not |
| 3154 | * see the completion before the eh fired. Just return |
| 3155 | * SUCCESS. |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3156 | */ |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3157 | iocb = &lpfc_cmd->cur_iocbq; |
| 3158 | if (lpfc_cmd->pCmd != cmnd) |
| 3159 | goto out; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3160 | |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3161 | BUG_ON(iocb->context1 != lpfc_cmd); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3162 | |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3163 | abtsiocb = lpfc_sli_get_iocbq(phba); |
| 3164 | if (abtsiocb == NULL) { |
| 3165 | ret = FAILED; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3166 | goto out; |
| 3167 | } |
| 3168 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3169 | /* |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3170 | * The scsi command can not be in txq and it is in flight because the |
| 3171 | * pCmd is still pointig at the SCSI command we have to abort. There |
| 3172 | * is no need to search the txcmplq. Just send an abort to the FW. |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3173 | */ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3174 | |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3175 | cmd = &iocb->iocb; |
| 3176 | icmd = &abtsiocb->iocb; |
| 3177 | icmd->un.acxri.abortType = ABORT_TYPE_ABTS; |
| 3178 | icmd->un.acxri.abortContextTag = cmd->ulpContext; |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 3179 | if (phba->sli_rev == LPFC_SLI_REV4) |
| 3180 | icmd->un.acxri.abortIoTag = iocb->sli4_xritag; |
| 3181 | else |
| 3182 | icmd->un.acxri.abortIoTag = cmd->ulpIoTag; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3183 | |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3184 | icmd->ulpLe = 1; |
| 3185 | icmd->ulpClass = cmd->ulpClass; |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 3186 | if (lpfc_is_link_up(phba)) |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3187 | icmd->ulpCommand = CMD_ABORT_XRI_CN; |
| 3188 | else |
| 3189 | icmd->ulpCommand = CMD_CLOSE_XRI_CN; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3190 | |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3191 | abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl; |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 3192 | abtsiocb->vport = vport; |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 3193 | if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) == |
| 3194 | IOCB_ERROR) { |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3195 | lpfc_sli_release_iocbq(phba, abtsiocb); |
| 3196 | ret = FAILED; |
| 3197 | goto out; |
| 3198 | } |
| 3199 | |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 3200 | if (phba->cfg_poll & DISABLE_FCP_RING_INT) |
| 3201 | lpfc_sli_poll_fcp_ring (phba); |
| 3202 | |
James Smart | fa61a54 | 2008-01-11 01:52:42 -0500 | [diff] [blame] | 3203 | lpfc_cmd->waitq = &waitq; |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3204 | /* Wait for abort to complete */ |
James Smart | fa61a54 | 2008-01-11 01:52:42 -0500 | [diff] [blame] | 3205 | wait_event_timeout(waitq, |
| 3206 | (lpfc_cmd->pCmd != cmnd), |
| 3207 | (2*vport->cfg_devloss_tmo*HZ)); |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 3208 | |
James Smart | fa61a54 | 2008-01-11 01:52:42 -0500 | [diff] [blame] | 3209 | spin_lock_irq(shost->host_lock); |
| 3210 | lpfc_cmd->waitq = NULL; |
| 3211 | spin_unlock_irq(shost->host_lock); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3212 | |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3213 | if (lpfc_cmd->pCmd == cmnd) { |
| 3214 | ret = FAILED; |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 3215 | lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, |
| 3216 | "0748 abort handler timed out waiting " |
| 3217 | "for abort to complete: ret %#x, ID %d, " |
| 3218 | "LUN %d, snum %#lx\n", |
| 3219 | ret, cmnd->device->id, cmnd->device->lun, |
| 3220 | cmnd->serial_number); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3221 | } |
| 3222 | |
| 3223 | out: |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 3224 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, |
| 3225 | "0749 SCSI Layer I/O Abort Request Status x%x ID %d " |
| 3226 | "LUN %d snum %#lx\n", ret, cmnd->device->id, |
| 3227 | cmnd->device->lun, cmnd->serial_number); |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3228 | return ret; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3229 | } |
| 3230 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3231 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 3232 | * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3233 | * @cmnd: Pointer to scsi_cmnd data structure. |
| 3234 | * |
| 3235 | * This routine does a device reset by sending a TARGET_RESET task management |
| 3236 | * command. |
| 3237 | * |
| 3238 | * Return code : |
| 3239 | * 0x2003 - Error |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 3240 | * 0x2002 - Success |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3241 | **/ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3242 | static int |
James Smart | 7054a60 | 2007-04-25 09:52:34 -0400 | [diff] [blame] | 3243 | lpfc_device_reset_handler(struct scsi_cmnd *cmnd) |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3244 | { |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 3245 | struct Scsi_Host *shost = cmnd->device->host; |
| 3246 | struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; |
| 3247 | struct lpfc_hba *phba = vport->phba; |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3248 | struct lpfc_scsi_buf *lpfc_cmd; |
| 3249 | struct lpfc_iocbq *iocbq, *iocbqrsp; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3250 | struct lpfc_rport_data *rdata = cmnd->device->hostdata; |
| 3251 | struct lpfc_nodelist *pnode = rdata->pnode; |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3252 | unsigned long later; |
| 3253 | int ret = SUCCESS; |
| 3254 | int status; |
| 3255 | int cnt; |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 3256 | struct lpfc_scsi_event_header scsi_event; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3257 | |
James Smart | a90f568 | 2006-08-17 11:58:04 -0400 | [diff] [blame] | 3258 | lpfc_block_error_handler(cmnd); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3259 | /* |
| 3260 | * If target is not in a MAPPED state, delay the reset until |
James Smart | c01f320 | 2006-08-18 17:47:08 -0400 | [diff] [blame] | 3261 | * target is rediscovered or devloss timeout expires. |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3262 | */ |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3263 | later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies; |
| 3264 | while (time_after(later, jiffies)) { |
James Smart | 58da1ff | 2008-04-07 10:15:56 -0400 | [diff] [blame] | 3265 | if (!pnode || !NLP_CHK_NODE_ACT(pnode)) |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3266 | return FAILED; |
James Smart | f560351 | 2006-12-02 13:35:43 -0500 | [diff] [blame] | 3267 | if (pnode->nlp_state == NLP_STE_MAPPED_NODE) |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3268 | break; |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3269 | schedule_timeout_uninterruptible(msecs_to_jiffies(500)); |
| 3270 | rdata = cmnd->device->hostdata; |
| 3271 | if (!rdata) |
| 3272 | break; |
| 3273 | pnode = rdata->pnode; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3274 | } |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 3275 | |
| 3276 | scsi_event.event_type = FC_REG_SCSI_EVENT; |
| 3277 | scsi_event.subcategory = LPFC_EVENT_TGTRESET; |
| 3278 | scsi_event.lun = 0; |
| 3279 | memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name)); |
| 3280 | memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name)); |
| 3281 | |
| 3282 | fc_host_post_vendor_event(shost, |
| 3283 | fc_get_event_number(), |
| 3284 | sizeof(scsi_event), |
| 3285 | (char *)&scsi_event, |
James Smart | ddcc50f | 2008-12-04 22:38:46 -0500 | [diff] [blame] | 3286 | LPFC_NL_VENDOR_ID); |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 3287 | |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3288 | if (!rdata || pnode->nlp_state != NLP_STE_MAPPED_NODE) { |
| 3289 | lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, |
| 3290 | "0721 LUN Reset rport " |
| 3291 | "failure: msec x%x rdata x%p\n", |
| 3292 | jiffies_to_msecs(jiffies - later), rdata); |
| 3293 | return FAILED; |
| 3294 | } |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 3295 | lpfc_cmd = lpfc_get_scsi_buf(phba); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3296 | if (lpfc_cmd == NULL) |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3297 | return FAILED; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3298 | lpfc_cmd->timeout = 60; |
James Smart | 0b18ac4 | 2006-05-01 21:50:40 -0400 | [diff] [blame] | 3299 | lpfc_cmd->rdata = rdata; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3300 | |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3301 | status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, |
| 3302 | cmnd->device->lun, |
| 3303 | FCP_TARGET_RESET); |
| 3304 | if (!status) { |
| 3305 | lpfc_release_scsi_buf(phba, lpfc_cmd); |
| 3306 | return FAILED; |
| 3307 | } |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3308 | iocbq = &lpfc_cmd->cur_iocbq; |
| 3309 | |
| 3310 | /* get a buffer for this IOCB command response */ |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3311 | iocbqrsp = lpfc_sli_get_iocbq(phba); |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3312 | if (iocbqrsp == NULL) { |
| 3313 | lpfc_release_scsi_buf(phba, lpfc_cmd); |
| 3314 | return FAILED; |
| 3315 | } |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 3316 | lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, |
| 3317 | "0703 Issue target reset to TGT %d LUN %d " |
| 3318 | "rpi x%x nlp_flag x%x\n", cmnd->device->id, |
| 3319 | cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag); |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 3320 | status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING, |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3321 | iocbq, iocbqrsp, lpfc_cmd->timeout); |
| 3322 | if (status == IOCB_TIMEDOUT) { |
James Smart | 7054a60 | 2007-04-25 09:52:34 -0400 | [diff] [blame] | 3323 | iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl; |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3324 | ret = TIMEOUT_ERROR; |
| 3325 | } else { |
| 3326 | if (status != IOCB_SUCCESS) |
| 3327 | ret = FAILED; |
James Smart | 7054a60 | 2007-04-25 09:52:34 -0400 | [diff] [blame] | 3328 | lpfc_release_scsi_buf(phba, lpfc_cmd); |
| 3329 | } |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 3330 | lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, |
| 3331 | "0713 SCSI layer issued device reset (%d, %d) " |
| 3332 | "return x%x status x%x result x%x\n", |
| 3333 | cmnd->device->id, cmnd->device->lun, ret, |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3334 | iocbqrsp->iocb.ulpStatus, |
| 3335 | iocbqrsp->iocb.un.ulpWord[4]); |
| 3336 | lpfc_sli_release_iocbq(phba, iocbqrsp); |
| 3337 | cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id, cmnd->device->lun, |
| 3338 | LPFC_CTX_TGT); |
| 3339 | if (cnt) |
| 3340 | lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring], |
| 3341 | cmnd->device->id, cmnd->device->lun, |
| 3342 | LPFC_CTX_TGT); |
| 3343 | later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies; |
| 3344 | while (time_after(later, jiffies) && cnt) { |
| 3345 | schedule_timeout_uninterruptible(msecs_to_jiffies(20)); |
| 3346 | cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id, |
| 3347 | cmnd->device->lun, LPFC_CTX_TGT); |
| 3348 | } |
| 3349 | if (cnt) { |
| 3350 | lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, |
| 3351 | "0719 device reset I/O flush failure: " |
| 3352 | "cnt x%x\n", cnt); |
| 3353 | ret = FAILED; |
| 3354 | } |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3355 | return ret; |
| 3356 | } |
| 3357 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3358 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 3359 | * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3360 | * @cmnd: Pointer to scsi_cmnd data structure. |
| 3361 | * |
| 3362 | * This routine does target reset to all target on @cmnd->device->host. |
| 3363 | * |
| 3364 | * Return Code: |
| 3365 | * 0x2003 - Error |
| 3366 | * 0x2002 - Success |
| 3367 | **/ |
Jeff Garzik | 94d0e7b8 | 2005-05-28 07:55:48 -0400 | [diff] [blame] | 3368 | static int |
James Smart | 7054a60 | 2007-04-25 09:52:34 -0400 | [diff] [blame] | 3369 | lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3370 | { |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 3371 | struct Scsi_Host *shost = cmnd->device->host; |
| 3372 | struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; |
| 3373 | struct lpfc_hba *phba = vport->phba; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3374 | struct lpfc_nodelist *ndlp = NULL; |
| 3375 | int match; |
James Smart | d7c255b | 2008-08-24 21:50:00 -0400 | [diff] [blame] | 3376 | int ret = SUCCESS, status = SUCCESS, i; |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3377 | int cnt; |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 3378 | struct lpfc_scsi_buf * lpfc_cmd; |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3379 | unsigned long later; |
James Smart | ea2151b | 2008-09-07 11:52:10 -0400 | [diff] [blame] | 3380 | struct lpfc_scsi_event_header scsi_event; |
| 3381 | |
| 3382 | scsi_event.event_type = FC_REG_SCSI_EVENT; |
| 3383 | scsi_event.subcategory = LPFC_EVENT_BUSRESET; |
| 3384 | scsi_event.lun = 0; |
| 3385 | memcpy(scsi_event.wwpn, &vport->fc_portname, sizeof(struct lpfc_name)); |
| 3386 | memcpy(scsi_event.wwnn, &vport->fc_nodename, sizeof(struct lpfc_name)); |
| 3387 | |
| 3388 | fc_host_post_vendor_event(shost, |
| 3389 | fc_get_event_number(), |
| 3390 | sizeof(scsi_event), |
| 3391 | (char *)&scsi_event, |
James Smart | ddcc50f | 2008-12-04 22:38:46 -0500 | [diff] [blame] | 3392 | LPFC_NL_VENDOR_ID); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3393 | |
James Smart | a90f568 | 2006-08-17 11:58:04 -0400 | [diff] [blame] | 3394 | lpfc_block_error_handler(cmnd); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3395 | /* |
| 3396 | * Since the driver manages a single bus device, reset all |
| 3397 | * targets known to the driver. Should any target reset |
| 3398 | * fail, this routine returns failure to the midlayer. |
| 3399 | */ |
James Smart | e17da18 | 2006-07-06 15:49:25 -0400 | [diff] [blame] | 3400 | for (i = 0; i < LPFC_MAX_TARGET; i++) { |
James Smart | 685f0bf | 2007-04-25 09:53:08 -0400 | [diff] [blame] | 3401 | /* Search for mapped node by target ID */ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3402 | match = 0; |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 3403 | spin_lock_irq(shost->host_lock); |
| 3404 | list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { |
James Smart | e47c909 | 2008-02-08 18:49:26 -0500 | [diff] [blame] | 3405 | if (!NLP_CHK_NODE_ACT(ndlp)) |
| 3406 | continue; |
James Smart | 685f0bf | 2007-04-25 09:53:08 -0400 | [diff] [blame] | 3407 | if (ndlp->nlp_state == NLP_STE_MAPPED_NODE && |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3408 | ndlp->nlp_sid == i && |
James Smart | 685f0bf | 2007-04-25 09:53:08 -0400 | [diff] [blame] | 3409 | ndlp->rport) { |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3410 | match = 1; |
| 3411 | break; |
| 3412 | } |
| 3413 | } |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 3414 | spin_unlock_irq(shost->host_lock); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3415 | if (!match) |
| 3416 | continue; |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3417 | lpfc_cmd = lpfc_get_scsi_buf(phba); |
| 3418 | if (lpfc_cmd) { |
| 3419 | lpfc_cmd->timeout = 60; |
| 3420 | status = lpfc_scsi_tgt_reset(lpfc_cmd, vport, i, |
| 3421 | cmnd->device->lun, |
| 3422 | ndlp->rport->dd_data); |
| 3423 | if (status != TIMEOUT_ERROR) |
| 3424 | lpfc_release_scsi_buf(phba, lpfc_cmd); |
| 3425 | } |
| 3426 | if (!lpfc_cmd || status != SUCCESS) { |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 3427 | lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, |
| 3428 | "0700 Bus Reset on target %d failed\n", |
| 3429 | i); |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3430 | ret = FAILED; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3431 | } |
| 3432 | } |
James.Smart@Emulex.Com | 6175c02 | 2005-11-28 11:42:05 -0500 | [diff] [blame] | 3433 | /* |
| 3434 | * All outstanding txcmplq I/Os should have been aborted by |
| 3435 | * the targets. Unfortunately, some targets do not abide by |
| 3436 | * this forcing the driver to double check. |
| 3437 | */ |
James Smart | 51ef4c2 | 2007-08-02 11:10:31 -0400 | [diff] [blame] | 3438 | cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST); |
James.Smart@Emulex.Com | 6175c02 | 2005-11-28 11:42:05 -0500 | [diff] [blame] | 3439 | if (cnt) |
James Smart | 51ef4c2 | 2007-08-02 11:10:31 -0400 | [diff] [blame] | 3440 | lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring], |
| 3441 | 0, 0, LPFC_CTX_HOST); |
James Smart | 915caaa | 2008-06-14 22:52:38 -0400 | [diff] [blame] | 3442 | later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies; |
| 3443 | while (time_after(later, jiffies) && cnt) { |
| 3444 | schedule_timeout_uninterruptible(msecs_to_jiffies(20)); |
James Smart | 51ef4c2 | 2007-08-02 11:10:31 -0400 | [diff] [blame] | 3445 | cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3446 | } |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3447 | if (cnt) { |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 3448 | lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, |
| 3449 | "0715 Bus Reset I/O flush failure: " |
| 3450 | "cnt x%x left x%x\n", cnt, i); |
James.Smart@Emulex.Com | 6175c02 | 2005-11-28 11:42:05 -0500 | [diff] [blame] | 3451 | ret = FAILED; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3452 | } |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 3453 | lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, |
| 3454 | "0714 SCSI layer issued Bus Reset Data: x%x\n", ret); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3455 | return ret; |
| 3456 | } |
| 3457 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3458 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 3459 | * lpfc_slave_alloc - scsi_host_template slave_alloc entry point |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3460 | * @sdev: Pointer to scsi_device. |
| 3461 | * |
| 3462 | * This routine populates the cmds_per_lun count + 2 scsi_bufs into this host's |
| 3463 | * globally available list of scsi buffers. This routine also makes sure scsi |
| 3464 | * buffer is not allocated more than HBA limit conveyed to midlayer. This list |
| 3465 | * of scsi buffer exists for the lifetime of the driver. |
| 3466 | * |
| 3467 | * Return codes: |
| 3468 | * non-0 - Error |
| 3469 | * 0 - Success |
| 3470 | **/ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3471 | static int |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3472 | lpfc_slave_alloc(struct scsi_device *sdev) |
| 3473 | { |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 3474 | struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata; |
| 3475 | struct lpfc_hba *phba = vport->phba; |
James.Smart@Emulex.Com | 19a7b4a | 2005-10-18 12:03:35 -0400 | [diff] [blame] | 3476 | struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 3477 | uint32_t total = 0; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3478 | uint32_t num_to_alloc = 0; |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 3479 | int num_allocated = 0; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3480 | |
James.Smart@Emulex.Com | 19a7b4a | 2005-10-18 12:03:35 -0400 | [diff] [blame] | 3481 | if (!rport || fc_remote_port_chkready(rport)) |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3482 | return -ENXIO; |
| 3483 | |
James.Smart@Emulex.Com | 19a7b4a | 2005-10-18 12:03:35 -0400 | [diff] [blame] | 3484 | sdev->hostdata = rport->dd_data; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3485 | |
| 3486 | /* |
| 3487 | * Populate the cmds_per_lun count scsi_bufs into this host's globally |
| 3488 | * available list of scsi buffers. Don't allocate more than the |
James.Smart@Emulex.Com | a784efb | 2005-10-28 20:29:51 -0400 | [diff] [blame] | 3489 | * HBA limit conveyed to the midlayer via the host structure. The |
| 3490 | * formula accounts for the lun_queue_depth + error handlers + 1 |
| 3491 | * extra. This list of scsi bufs exists for the lifetime of the driver. |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3492 | */ |
| 3493 | total = phba->total_scsi_bufs; |
James Smart | 3de2a65 | 2007-08-02 11:09:59 -0400 | [diff] [blame] | 3494 | num_to_alloc = vport->cfg_lun_queue_depth + 2; |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 3495 | |
| 3496 | /* Allow some exchanges to be available always to complete discovery */ |
| 3497 | if (total >= phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) { |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 3498 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, |
| 3499 | "0704 At limitation of %d preallocated " |
| 3500 | "command buffers\n", total); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3501 | return 0; |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 3502 | /* Allow some exchanges to be available always to complete discovery */ |
| 3503 | } else if (total + num_to_alloc > |
| 3504 | phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) { |
James Smart | e8b6201 | 2007-08-02 11:10:09 -0400 | [diff] [blame] | 3505 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, |
| 3506 | "0705 Allocation request of %d " |
| 3507 | "command buffers will exceed max of %d. " |
| 3508 | "Reducing allocation request to %d.\n", |
| 3509 | num_to_alloc, phba->cfg_hba_queue_depth, |
| 3510 | (phba->cfg_hba_queue_depth - total)); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3511 | num_to_alloc = phba->cfg_hba_queue_depth - total; |
| 3512 | } |
James Smart | 3772a99 | 2009-05-22 14:50:54 -0400 | [diff] [blame] | 3513 | num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc); |
| 3514 | if (num_to_alloc != num_allocated) { |
| 3515 | lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, |
| 3516 | "0708 Allocation request of %d " |
| 3517 | "command buffers did not succeed. " |
| 3518 | "Allocated %d buffers.\n", |
| 3519 | num_to_alloc, num_allocated); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3520 | } |
| 3521 | return 0; |
| 3522 | } |
| 3523 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3524 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 3525 | * lpfc_slave_configure - scsi_host_template slave_configure entry point |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3526 | * @sdev: Pointer to scsi_device. |
| 3527 | * |
| 3528 | * This routine configures following items |
| 3529 | * - Tag command queuing support for @sdev if supported. |
| 3530 | * - Dev loss time out value of fc_rport. |
| 3531 | * - Enable SLI polling for fcp ring if ENABLE_FCP_RING_POLLING flag is set. |
| 3532 | * |
| 3533 | * Return codes: |
| 3534 | * 0 - Success |
| 3535 | **/ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3536 | static int |
| 3537 | lpfc_slave_configure(struct scsi_device *sdev) |
| 3538 | { |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 3539 | struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata; |
| 3540 | struct lpfc_hba *phba = vport->phba; |
| 3541 | struct fc_rport *rport = starget_to_rport(sdev->sdev_target); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3542 | |
| 3543 | if (sdev->tagged_supported) |
James Smart | 3de2a65 | 2007-08-02 11:09:59 -0400 | [diff] [blame] | 3544 | scsi_activate_tcq(sdev, vport->cfg_lun_queue_depth); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3545 | else |
James Smart | 3de2a65 | 2007-08-02 11:09:59 -0400 | [diff] [blame] | 3546 | scsi_deactivate_tcq(sdev, vport->cfg_lun_queue_depth); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3547 | |
| 3548 | /* |
| 3549 | * Initialize the fc transport attributes for the target |
| 3550 | * containing this scsi device. Also note that the driver's |
| 3551 | * target pointer is stored in the starget_data for the |
| 3552 | * driver's sysfs entry point functions. |
| 3553 | */ |
James Smart | 3de2a65 | 2007-08-02 11:09:59 -0400 | [diff] [blame] | 3554 | rport->dev_loss_tmo = vport->cfg_devloss_tmo; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3555 | |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame] | 3556 | if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { |
| 3557 | lpfc_sli_poll_fcp_ring(phba); |
| 3558 | if (phba->cfg_poll & DISABLE_FCP_RING_INT) |
| 3559 | lpfc_poll_rearm_timer(phba); |
| 3560 | } |
| 3561 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3562 | return 0; |
| 3563 | } |
| 3564 | |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3565 | /** |
James Smart | 3621a71 | 2009-04-06 18:47:14 -0400 | [diff] [blame] | 3566 | * lpfc_slave_destroy - slave_destroy entry point of SHT data structure |
James Smart | 9bad767 | 2008-12-04 22:39:02 -0500 | [diff] [blame] | 3567 | * @sdev: Pointer to scsi_device. |
| 3568 | * |
| 3569 | * This routine sets @sdev hostatdata filed to null. |
| 3570 | **/ |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3571 | static void |
| 3572 | lpfc_slave_destroy(struct scsi_device *sdev) |
| 3573 | { |
| 3574 | sdev->hostdata = NULL; |
| 3575 | return; |
| 3576 | } |
| 3577 | |
James Smart | 92d7f7b | 2007-06-17 19:56:38 -0500 | [diff] [blame] | 3578 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3579 | struct scsi_host_template lpfc_template = { |
| 3580 | .module = THIS_MODULE, |
| 3581 | .name = LPFC_DRIVER_NAME, |
| 3582 | .info = lpfc_info, |
| 3583 | .queuecommand = lpfc_queuecommand, |
| 3584 | .eh_abort_handler = lpfc_abort_handler, |
James Smart | 7054a60 | 2007-04-25 09:52:34 -0400 | [diff] [blame] | 3585 | .eh_device_reset_handler= lpfc_device_reset_handler, |
| 3586 | .eh_bus_reset_handler = lpfc_bus_reset_handler, |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3587 | .slave_alloc = lpfc_slave_alloc, |
| 3588 | .slave_configure = lpfc_slave_configure, |
| 3589 | .slave_destroy = lpfc_slave_destroy, |
James Smart | 47a8617 | 2007-04-25 09:53:22 -0400 | [diff] [blame] | 3590 | .scan_finished = lpfc_scan_finished, |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3591 | .this_id = -1, |
James Smart | 83108bd | 2008-01-11 01:53:09 -0500 | [diff] [blame] | 3592 | .sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT, |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3593 | .cmd_per_lun = LPFC_CMD_PER_LUN, |
| 3594 | .use_clustering = ENABLE_CLUSTERING, |
James Smart | 2e0fef8 | 2007-06-17 19:56:36 -0500 | [diff] [blame] | 3595 | .shost_attrs = lpfc_hba_attrs, |
James.Smart@Emulex.Com | 564b296 | 2005-06-25 10:34:17 -0400 | [diff] [blame] | 3596 | .max_sectors = 0xFFFF, |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 3597 | }; |
James Smart | 3de2a65 | 2007-08-02 11:09:59 -0400 | [diff] [blame] | 3598 | |
| 3599 | struct scsi_host_template lpfc_vport_template = { |
| 3600 | .module = THIS_MODULE, |
| 3601 | .name = LPFC_DRIVER_NAME, |
| 3602 | .info = lpfc_info, |
| 3603 | .queuecommand = lpfc_queuecommand, |
| 3604 | .eh_abort_handler = lpfc_abort_handler, |
| 3605 | .eh_device_reset_handler= lpfc_device_reset_handler, |
| 3606 | .eh_bus_reset_handler = lpfc_bus_reset_handler, |
| 3607 | .slave_alloc = lpfc_slave_alloc, |
| 3608 | .slave_configure = lpfc_slave_configure, |
| 3609 | .slave_destroy = lpfc_slave_destroy, |
| 3610 | .scan_finished = lpfc_scan_finished, |
| 3611 | .this_id = -1, |
James Smart | 83108bd | 2008-01-11 01:53:09 -0500 | [diff] [blame] | 3612 | .sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT, |
James Smart | 3de2a65 | 2007-08-02 11:09:59 -0400 | [diff] [blame] | 3613 | .cmd_per_lun = LPFC_CMD_PER_LUN, |
| 3614 | .use_clustering = ENABLE_CLUSTERING, |
| 3615 | .shost_attrs = lpfc_vport_attrs, |
| 3616 | .max_sectors = 0xFFFF, |
| 3617 | }; |