blob: b403d934e4e35fd57ce3598968ae1bc6a452c3b2 [file] [log] [blame]
David Brownell38bde1d2005-08-31 09:52:45 -07001/*
2 * Simple "CDC Subset" USB Networking Links
3 * Copyright (C) 2000-2005 by David Brownell
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 */
19
David Brownell38bde1d2005-08-31 09:52:45 -070020#include <linux/module.h>
21#include <linux/kmod.h>
David Brownell38bde1d2005-08-31 09:52:45 -070022#include <linux/init.h>
23#include <linux/netdevice.h>
24#include <linux/etherdevice.h>
25#include <linux/ethtool.h>
26#include <linux/workqueue.h>
27#include <linux/mii.h>
28#include <linux/usb.h>
Jussi Kivilinna3692e942008-01-26 00:51:45 +020029#include <linux/usb/usbnet.h>
David Brownell38bde1d2005-08-31 09:52:45 -070030
31
32/*
33 * This supports simple USB network links that don't require any special
34 * framing or hardware control operations. The protocol used here is a
35 * strict subset of CDC Ethernet, with three basic differences reflecting
36 * the goal that almost any hardware should run it:
37 *
38 * - Minimal runtime control: one interface, no altsettings, and
39 * no vendor or class specific control requests. If a device is
40 * configured, it is allowed to exchange packets with the host.
41 * Fancier models would mean not working on some hardware.
42 *
43 * - Minimal manufacturing control: no IEEE "Organizationally
44 * Unique ID" required, or an EEPROMs to store one. Each host uses
45 * one random "locally assigned" Ethernet address instead, which can
46 * of course be overridden using standard tools like "ifconfig".
47 * (With 2^46 such addresses, same-net collisions are quite rare.)
48 *
49 * - There is no additional framing data for USB. Packets are written
50 * exactly as in CDC Ethernet, starting with an Ethernet header and
51 * terminated by a short packet. However, the host will never send a
52 * zero length packet; some systems can't handle those robustly.
53 *
54 * Anything that can transmit and receive USB bulk packets can implement
55 * this protocol. That includes both smart peripherals and quite a lot
56 * of "host-to-host" USB cables (which embed two devices back-to-back).
57 *
58 * Note that although Linux may use many of those host-to-host links
59 * with this "cdc_subset" framing, that doesn't mean there may not be a
60 * better approach. Handling the "other end unplugs/replugs" scenario
61 * well tends to require chip-specific vendor requests. Also, Windows
62 * peers at the other end of host-to-host cables may expect their own
63 * framing to be used rather than this "cdc_subset" model.
64 */
65
66#if defined(CONFIG_USB_EPSON2888) || defined(CONFIG_USB_ARMLINUX)
67/* PDA style devices are always connected if present */
68static int always_connected (struct usbnet *dev)
69{
70 return 0;
71}
72#endif
73
74#ifdef CONFIG_USB_ALI_M5632
75#define HAVE_HARDWARE
76
77/*-------------------------------------------------------------------------
78 *
79 * ALi M5632 driver ... does high speed
80 *
David Brownell6e91f522007-02-15 18:50:01 -080081 * NOTE that the MS-Windows drivers for this chip use some funky and
82 * (naturally) undocumented 7-byte prefix to each packet, so this is a
83 * case where we don't currently interoperate. Also, once you unplug
84 * one end of the cable, you need to replug the other end too ... since
85 * chip docs are unavailable, there's no way to reset the relevant state
86 * short of a power cycle.
87 *
David Brownell38bde1d2005-08-31 09:52:45 -070088 *-------------------------------------------------------------------------*/
89
90static const struct driver_info ali_m5632_info = {
91 .description = "ALi M5632",
Arnd Bergmannc2613442011-04-01 20:12:02 -070092 .flags = FLAG_POINTTOPOINT,
David Brownell38bde1d2005-08-31 09:52:45 -070093};
94
David Brownell38bde1d2005-08-31 09:52:45 -070095#endif
96
97
98#ifdef CONFIG_USB_AN2720
99#define HAVE_HARDWARE
100
101/*-------------------------------------------------------------------------
102 *
103 * AnchorChips 2720 driver ... http://www.cypress.com
104 *
105 * This doesn't seem to have a way to detect whether the peer is
106 * connected, or need any reset handshaking. It's got pretty big
107 * internal buffers (handles most of a frame's worth of data).
108 * Chip data sheets don't describe any vendor control messages.
109 *
110 *-------------------------------------------------------------------------*/
111
112static const struct driver_info an2720_info = {
113 .description = "AnchorChips/Cypress 2720",
Arnd Bergmannc2613442011-04-01 20:12:02 -0700114 .flags = FLAG_POINTTOPOINT,
David Brownell38bde1d2005-08-31 09:52:45 -0700115 // no reset available!
116 // no check_connect available!
117
118 .in = 2, .out = 2, // direction distinguishes these
119};
120
121#endif /* CONFIG_USB_AN2720 */
122
123
124#ifdef CONFIG_USB_BELKIN
125#define HAVE_HARDWARE
126
127/*-------------------------------------------------------------------------
128 *
129 * Belkin F5U104 ... two NetChip 2280 devices + Atmel AVR microcontroller
130 *
131 * ... also two eTEK designs, including one sold as "Advance USBNET"
132 *
133 *-------------------------------------------------------------------------*/
134
135static const struct driver_info belkin_info = {
136 .description = "Belkin, eTEK, or compatible",
Arnd Bergmannc2613442011-04-01 20:12:02 -0700137 .flags = FLAG_POINTTOPOINT,
David Brownell38bde1d2005-08-31 09:52:45 -0700138};
139
140#endif /* CONFIG_USB_BELKIN */
141
142
143
144#ifdef CONFIG_USB_EPSON2888
145#define HAVE_HARDWARE
146
147/*-------------------------------------------------------------------------
148 *
149 * EPSON USB clients
150 *
151 * This is the same idea as Linux PDAs (below) except the firmware in the
152 * device might not be Tux-powered. Epson provides reference firmware that
153 * implements this interface. Product developers can reuse or modify that
154 * code, such as by using their own product and vendor codes.
155 *
156 * Support was from Juro Bystricky <bystricky.juro@erd.epson.com>
157 *
158 *-------------------------------------------------------------------------*/
159
160static const struct driver_info epson2888_info = {
161 .description = "Epson USB Device",
162 .check_connect = always_connected,
Arnd Bergmannc2613442011-04-01 20:12:02 -0700163 .flags = FLAG_POINTTOPOINT,
David Brownell38bde1d2005-08-31 09:52:45 -0700164
165 .in = 4, .out = 3,
166};
167
168#endif /* CONFIG_USB_EPSON2888 */
169
170
David Brownell691895c2007-02-15 21:32:31 -0800171/*-------------------------------------------------------------------------
172 *
173 * info from Jonathan McDowell <noodles@earth.li>
174 *
175 *-------------------------------------------------------------------------*/
David Brownell38bde1d2005-08-31 09:52:45 -0700176#ifdef CONFIG_USB_KC2190
177#define HAVE_HARDWARE
178static const struct driver_info kc2190_info = {
179 .description = "KC Technology KC-190",
Arnd Bergmannc2613442011-04-01 20:12:02 -0700180 .flags = FLAG_POINTTOPOINT,
David Brownell38bde1d2005-08-31 09:52:45 -0700181};
182#endif /* CONFIG_USB_KC2190 */
183
184
185#ifdef CONFIG_USB_ARMLINUX
186#define HAVE_HARDWARE
187
188/*-------------------------------------------------------------------------
189 *
190 * Intel's SA-1100 chip integrates basic USB support, and is used
191 * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more.
192 * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to
193 * network using minimal USB framing data.
194 *
195 * This describes the driver currently in standard ARM Linux kernels.
196 * The Zaurus uses a different driver (see later).
197 *
198 * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support
199 * and different USB endpoint numbering than the SA1100 devices. The
200 * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100
201 * so we rely on the endpoint descriptors.
202 *
203 *-------------------------------------------------------------------------*/
204
205static const struct driver_info linuxdev_info = {
206 .description = "Linux Device",
207 .check_connect = always_connected,
Arnd Bergmannc2613442011-04-01 20:12:02 -0700208 .flags = FLAG_POINTTOPOINT,
David Brownell38bde1d2005-08-31 09:52:45 -0700209};
210
211static const struct driver_info yopy_info = {
212 .description = "Yopy",
213 .check_connect = always_connected,
Arnd Bergmannc2613442011-04-01 20:12:02 -0700214 .flags = FLAG_POINTTOPOINT,
David Brownell38bde1d2005-08-31 09:52:45 -0700215};
216
217static const struct driver_info blob_info = {
218 .description = "Boot Loader OBject",
219 .check_connect = always_connected,
Arnd Bergmannc2613442011-04-01 20:12:02 -0700220 .flags = FLAG_POINTTOPOINT,
David Brownell38bde1d2005-08-31 09:52:45 -0700221};
222
223#endif /* CONFIG_USB_ARMLINUX */
224
225
226/*-------------------------------------------------------------------------*/
227
228#ifndef HAVE_HARDWARE
Ingo Molnarf82b9872008-05-16 09:30:14 +0200229#warning You need to configure some hardware for this driver
David Brownell38bde1d2005-08-31 09:52:45 -0700230#endif
231
232/*
233 * chip vendor names won't normally be on the cables, and
234 * may not be on the device.
235 */
236
237static const struct usb_device_id products [] = {
238
239#ifdef CONFIG_USB_ALI_M5632
240{
241 USB_DEVICE (0x0402, 0x5632), // ALi defaults
242 .driver_info = (unsigned long) &ali_m5632_info,
243},
David Brownell6e91f522007-02-15 18:50:01 -0800244{
245 USB_DEVICE (0x182d,0x207c), // SiteCom CN-124
246 .driver_info = (unsigned long) &ali_m5632_info,
247},
David Brownell38bde1d2005-08-31 09:52:45 -0700248#endif
249
250#ifdef CONFIG_USB_AN2720
251{
252 USB_DEVICE (0x0547, 0x2720), // AnchorChips defaults
253 .driver_info = (unsigned long) &an2720_info,
254}, {
255 USB_DEVICE (0x0547, 0x2727), // Xircom PGUNET
256 .driver_info = (unsigned long) &an2720_info,
257},
258#endif
259
260#ifdef CONFIG_USB_BELKIN
261{
262 USB_DEVICE (0x050d, 0x0004), // Belkin
263 .driver_info = (unsigned long) &belkin_info,
264}, {
265 USB_DEVICE (0x056c, 0x8100), // eTEK
266 .driver_info = (unsigned long) &belkin_info,
267}, {
268 USB_DEVICE (0x0525, 0x9901), // Advance USBNET (eTEK)
269 .driver_info = (unsigned long) &belkin_info,
270},
271#endif
272
273#ifdef CONFIG_USB_EPSON2888
274{
275 USB_DEVICE (0x0525, 0x2888), // EPSON USB client
276 .driver_info = (unsigned long) &epson2888_info,
277},
278#endif
279
280#ifdef CONFIG_USB_KC2190
281{
282 USB_DEVICE (0x050f, 0x0190), // KC-190
283 .driver_info = (unsigned long) &kc2190_info,
284},
285#endif
286
287#ifdef CONFIG_USB_ARMLINUX
288/*
289 * SA-1100 using standard ARM Linux kernels, or compatible.
290 * Often used when talking to Linux PDAs (iPaq, Yopy, etc).
291 * The sa-1100 "usb-eth" driver handles the basic framing.
292 *
293 * PXA25x or PXA210 ... these use a "usb-eth" driver much like
294 * the sa1100 one, but hardware uses different endpoint numbers.
295 *
296 * Or the Linux "Ethernet" gadget on hardware that can't talk
297 * CDC Ethernet (e.g., no altsettings), in either of two modes:
298 * - acting just like the old "usb-eth" firmware, though
299 * the implementation is different
300 * - supporting RNDIS as the first/default configuration for
301 * MS-Windows interop; Linux needs to use the other config
302 */
303{
304 // 1183 = 0x049F, both used as hex values?
305 // Compaq "Itsy" vendor/product id
306 USB_DEVICE (0x049F, 0x505A), // usb-eth, or compatible
307 .driver_info = (unsigned long) &linuxdev_info,
308}, {
309 USB_DEVICE (0x0E7E, 0x1001), // G.Mate "Yopy"
310 .driver_info = (unsigned long) &yopy_info,
311}, {
312 USB_DEVICE (0x8086, 0x07d3), // "blob" bootloader
313 .driver_info = (unsigned long) &blob_info,
314}, {
jing xiangd4f01a72007-07-14 14:13:24 +0800315 USB_DEVICE (0x1286, 0x8001), // "blob" bootloader
316 .driver_info = (unsigned long) &blob_info,
317}, {
David Brownell6be83252009-06-20 01:21:53 -0700318 // Linux Ethernet/RNDIS gadget, mostly on PXA, second config
319 // e.g. Gumstix, current OpenZaurus, ... or anything else
320 // that just enables this gadget option.
321 USB_DEVICE (0x0525, 0xa4a2),
David Brownell38bde1d2005-08-31 09:52:45 -0700322 .driver_info = (unsigned long) &linuxdev_info,
323},
324#endif
325
326 { }, // END
327};
328MODULE_DEVICE_TABLE(usb, products);
329
330/*-------------------------------------------------------------------------*/
331
332static struct usb_driver cdc_subset_driver = {
David Brownell38bde1d2005-08-31 09:52:45 -0700333 .name = "cdc_subset",
334 .probe = usbnet_probe,
335 .suspend = usbnet_suspend,
336 .resume = usbnet_resume,
337 .disconnect = usbnet_disconnect,
338 .id_table = products,
339};
340
Greg Kroah-Hartmand632eb12011-11-18 09:44:20 -0800341module_usb_driver(cdc_subset_driver);
David Brownell38bde1d2005-08-31 09:52:45 -0700342
343MODULE_AUTHOR("David Brownell");
344MODULE_DESCRIPTION("Simple 'CDC Subset' USB networking links");
345MODULE_LICENSE("GPL");