| Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 1 | Kernel driver abituguru3 |
| 2 | ======================== |
| 3 | |
| 4 | Supported chips: |
| 5 | * Abit uGuru revision 3 (Hardware Monitor part, reading only) |
| 6 | Prefix: 'abituguru3' |
| 7 | Addresses scanned: ISA 0x0E0 |
| 8 | Datasheet: Not available, this driver is based on reverse engineering. |
| 9 | Note: |
| 10 | The uGuru is a microcontroller with onboard firmware which programs |
| 11 | it to behave as a hwmon IC. There are many different revisions of the |
| 12 | firmware and thus effectivly many different revisions of the uGuru. |
| 13 | Below is an incomplete list with which revisions are used for which |
| 14 | Motherboards: |
| 15 | uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7) |
| 16 | uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO) |
| 17 | uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8) |
| 18 | uGuru 2.3.0.0 ~ 2.3.0.9 (AN8) |
| 19 | uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X, |
| 20 | AW9D-MAX) |
| 21 | The abituguru3 driver is only for revison 3.0.x.x motherboards, |
| 22 | this driver will not work on older motherboards. For older |
| 23 | motherboards use the abituguru (without the 3 !) driver. |
| 24 | |
| 25 | Authors: |
| 26 | Hans de Goede <j.w.r.degoede@hhs.nl>, |
| 27 | (Initial reverse engineering done by Louis Kruger) |
| 28 | |
| 29 | |
| 30 | Module Parameters |
| 31 | ----------------- |
| 32 | |
| 33 | * force: bool Force detection. Note this parameter only causes the |
| 34 | detection to be skipped, and thus the insmod to |
| 35 | succeed. If the uGuru can't be read the actual hwmon |
| 36 | driver will not load and thus no hwmon device will get |
| 37 | registered. |
| 38 | * verbose: bool Should the driver be verbose? |
| 39 | 0/off/false normal output |
| 40 | 1/on/true + verbose error reporting (default) |
| 41 | Default: 1 (the driver is still in the testing phase) |
| 42 | |
| 43 | Description |
| 44 | ----------- |
| 45 | |
| 46 | This driver supports the hardware monitoring features of the third revision of |
| 47 | the Abit uGuru chip, found on recent Abit uGuru featuring motherboards. |
| 48 | |
| 49 | The 3rd revision of the uGuru chip in reality is a Winbond W83L951G. |
| Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame] | 50 | Unfortunately this doesn't help since the W83L951G is a generic microcontroller |
| Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 51 | with a custom Abit application running on it. |
| 52 | |
| 53 | Despite Abit not releasing any information regarding the uGuru revision 3, |
| 54 | Louis Kruger has managed to reverse engineer the sensor part of the uGuru. |
| 55 | Without his work this driver would not have been possible. |
| 56 | |
| 57 | Known Issues |
| 58 | ------------ |
| 59 | |
| 60 | The voltage and frequency control parts of the Abit uGuru are not supported, |
| 61 | neither is writing any of the sensor settings and writing / reading the |
| 62 | fanspeed control registers (FanEQ) |
| 63 | |
| 64 | If you encounter any problems please mail me <j.w.r.degoede@hhs.nl> and |
| 65 | include the output of: "dmesg | grep abituguru" |