blob: 79f337c47388ec759bd32190095a853afba978ce [file] [log] [blame]
Andy Fleming00db8182005-07-30 19:31:23 -04001/*
2 * include/linux/phy.h
3 *
4 * Framework and drivers for configuring and reading different PHYs
5 * Based on code in sungem_phy.c and gianfar_phy.c
6 *
7 * Author: Andy Fleming
8 *
9 * Copyright (c) 2004 Freescale Semiconductor, Inc.
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 *
16 */
17
18#ifndef __PHY_H
19#define __PHY_H
20
21#include <linux/spinlock.h>
22#include <linux/device.h>
Maciej W. Rozycki13df29f2006-10-03 16:18:28 +010023#include <linux/ethtool.h>
24#include <linux/mii.h>
25#include <linux/timer.h>
26#include <linux/workqueue.h>
David Woodhouse8626d3b2010-04-02 01:05:27 +000027#include <linux/mod_devicetable.h>
Andy Fleming00db8182005-07-30 19:31:23 -040028
Arun Sharma600634972011-07-26 16:09:06 -070029#include <linux/atomic.h>
Maciej W. Rozycki0ac49522007-09-28 22:42:14 -070030
Andy Fleming00db8182005-07-30 19:31:23 -040031#define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
32 SUPPORTED_10baseT_Full | \
33 SUPPORTED_100baseT_Half | \
34 SUPPORTED_100baseT_Full | \
35 SUPPORTED_Autoneg | \
36 SUPPORTED_TP | \
37 SUPPORTED_MII)
38
39#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
40 SUPPORTED_1000baseT_Half | \
41 SUPPORTED_1000baseT_Full)
42
Andy Flemingc5e38a92008-04-09 19:38:27 -050043/*
44 * Set phydev->irq to PHY_POLL if interrupts are not supported,
Andy Fleming00db8182005-07-30 19:31:23 -040045 * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
46 * the attached driver handles the interrupt
47 */
48#define PHY_POLL -1
49#define PHY_IGNORE_INTERRUPT -2
50
51#define PHY_HAS_INTERRUPT 0x00000001
52#define PHY_HAS_MAGICANEG 0x00000002
53
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060054/* Interface Mode definitions */
55typedef enum {
Shawn Guo4157ef12011-07-05 16:42:09 +080056 PHY_INTERFACE_MODE_NA,
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060057 PHY_INTERFACE_MODE_MII,
58 PHY_INTERFACE_MODE_GMII,
59 PHY_INTERFACE_MODE_SGMII,
60 PHY_INTERFACE_MODE_TBI,
61 PHY_INTERFACE_MODE_RMII,
62 PHY_INTERFACE_MODE_RGMII,
Kim Phillipsa9995892007-04-13 01:25:57 -050063 PHY_INTERFACE_MODE_RGMII_ID,
Kim Phillips7d400a42007-11-26 16:17:48 -060064 PHY_INTERFACE_MODE_RGMII_RXID,
65 PHY_INTERFACE_MODE_RGMII_TXID,
Shawn Guo4157ef12011-07-05 16:42:09 +080066 PHY_INTERFACE_MODE_RTBI,
67 PHY_INTERFACE_MODE_SMII,
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060068} phy_interface_t;
69
Andy Fleming00db8182005-07-30 19:31:23 -040070
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060071#define PHY_INIT_TIMEOUT 100000
Andy Fleming00db8182005-07-30 19:31:23 -040072#define PHY_STATE_TIME 1
73#define PHY_FORCE_TIMEOUT 10
74#define PHY_AN_TIMEOUT 10
75
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060076#define PHY_MAX_ADDR 32
Andy Fleming00db8182005-07-30 19:31:23 -040077
Kumar Galaa4d00f12006-01-11 11:27:33 -080078/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
Andy Fleming9d9326d2008-04-09 19:38:13 -050079#define PHY_ID_FMT "%s:%02x"
80
81/*
82 * Need to be a little smaller than phydev->dev.bus_id to leave room
83 * for the ":%02x"
84 */
David S. Miller8e401ec2009-05-26 21:16:25 -070085#define MII_BUS_ID_SIZE (20 - 3)
Kumar Galaa4d00f12006-01-11 11:27:33 -080086
Jason Gunthorpeabf35df2010-03-09 09:17:42 +000087/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
88 IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
89#define MII_ADDR_C45 (1<<30)
90
Andy Flemingc5e38a92008-04-09 19:38:27 -050091/*
92 * The Bus class for PHYs. Devices which provide access to
93 * PHYs should register using this structure
94 */
Andy Fleming00db8182005-07-30 19:31:23 -040095struct mii_bus {
96 const char *name;
Andy Fleming9d9326d2008-04-09 19:38:13 -050097 char id[MII_BUS_ID_SIZE];
Andy Fleming00db8182005-07-30 19:31:23 -040098 void *priv;
99 int (*read)(struct mii_bus *bus, int phy_id, int regnum);
100 int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
101 int (*reset)(struct mii_bus *bus);
102
Andy Flemingc5e38a92008-04-09 19:38:27 -0500103 /*
104 * A lock to ensure that only one thing can read/write
105 * the MDIO bus at a time
106 */
Nate Case35b5f6b2008-01-29 10:05:09 -0600107 struct mutex mdio_lock;
Andy Fleming00db8182005-07-30 19:31:23 -0400108
Lennert Buytenhek18ee49d2008-10-01 15:41:33 +0000109 struct device *parent;
Lennert Buytenhek46abc022008-10-08 16:33:40 -0700110 enum {
111 MDIOBUS_ALLOCATED = 1,
112 MDIOBUS_REGISTERED,
113 MDIOBUS_UNREGISTERED,
114 MDIOBUS_RELEASED,
115 } state;
116 struct device dev;
Andy Fleming00db8182005-07-30 19:31:23 -0400117
118 /* list of all PHYs on bus */
119 struct phy_device *phy_map[PHY_MAX_ADDR];
120
Peter Meerwaldc6883992010-09-02 04:06:24 +0000121 /* PHY addresses to be ignored when probing */
Matt Porterf896424c2005-11-02 16:13:06 -0700122 u32 phy_mask;
123
Andy Flemingc5e38a92008-04-09 19:38:27 -0500124 /*
125 * Pointer to an array of interrupts, each PHY's
126 * interrupt at the index matching its address
127 */
Andy Fleming00db8182005-07-30 19:31:23 -0400128 int *irq;
129};
Lennert Buytenhek46abc022008-10-08 16:33:40 -0700130#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
Andy Fleming00db8182005-07-30 19:31:23 -0400131
Lennert Buytenhek2e888102008-09-29 17:12:35 +0000132struct mii_bus *mdiobus_alloc(void);
133int mdiobus_register(struct mii_bus *bus);
134void mdiobus_unregister(struct mii_bus *bus);
135void mdiobus_free(struct mii_bus *bus);
136struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
Jason Gunthorpeabf35df2010-03-09 09:17:42 +0000137int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
138int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
Lennert Buytenhek2e888102008-09-29 17:12:35 +0000139
140
Andy Fleminge8a2b6a2006-12-01 12:01:06 -0600141#define PHY_INTERRUPT_DISABLED 0x0
142#define PHY_INTERRUPT_ENABLED 0x80000000
Andy Fleming00db8182005-07-30 19:31:23 -0400143
144/* PHY state machine states:
145 *
146 * DOWN: PHY device and driver are not ready for anything. probe
147 * should be called if and only if the PHY is in this state,
148 * given that the PHY device exists.
149 * - PHY driver probe function will, depending on the PHY, set
150 * the state to STARTING or READY
151 *
152 * STARTING: PHY device is coming up, and the ethernet driver is
153 * not ready. PHY drivers may set this in the probe function.
154 * If they do, they are responsible for making sure the state is
155 * eventually set to indicate whether the PHY is UP or READY,
156 * depending on the state when the PHY is done starting up.
157 * - PHY driver will set the state to READY
158 * - start will set the state to PENDING
159 *
160 * READY: PHY is ready to send and receive packets, but the
161 * controller is not. By default, PHYs which do not implement
162 * probe will be set to this state by phy_probe(). If the PHY
163 * driver knows the PHY is ready, and the PHY state is STARTING,
164 * then it sets this STATE.
165 * - start will set the state to UP
166 *
167 * PENDING: PHY device is coming up, but the ethernet driver is
168 * ready. phy_start will set this state if the PHY state is
169 * STARTING.
170 * - PHY driver will set the state to UP when the PHY is ready
171 *
172 * UP: The PHY and attached device are ready to do work.
173 * Interrupts should be started here.
174 * - timer moves to AN
175 *
176 * AN: The PHY is currently negotiating the link state. Link is
177 * therefore down for now. phy_timer will set this state when it
178 * detects the state is UP. config_aneg will set this state
179 * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
180 * - If autonegotiation finishes, but there's no link, it sets
181 * the state to NOLINK.
182 * - If aneg finishes with link, it sets the state to RUNNING,
183 * and calls adjust_link
184 * - If autonegotiation did not finish after an arbitrary amount
185 * of time, autonegotiation should be tried again if the PHY
186 * supports "magic" autonegotiation (back to AN)
187 * - If it didn't finish, and no magic_aneg, move to FORCING.
188 *
189 * NOLINK: PHY is up, but not currently plugged in.
190 * - If the timer notes that the link comes back, we move to RUNNING
191 * - config_aneg moves to AN
192 * - phy_stop moves to HALTED
193 *
194 * FORCING: PHY is being configured with forced settings
195 * - if link is up, move to RUNNING
196 * - If link is down, we drop to the next highest setting, and
197 * retry (FORCING) after a timeout
198 * - phy_stop moves to HALTED
199 *
200 * RUNNING: PHY is currently up, running, and possibly sending
201 * and/or receiving packets
202 * - timer will set CHANGELINK if we're polling (this ensures the
203 * link state is polled every other cycle of this state machine,
204 * which makes it every other second)
205 * - irq will set CHANGELINK
206 * - config_aneg will set AN
207 * - phy_stop moves to HALTED
208 *
209 * CHANGELINK: PHY experienced a change in link state
210 * - timer moves to RUNNING if link
211 * - timer moves to NOLINK if the link is down
212 * - phy_stop moves to HALTED
213 *
214 * HALTED: PHY is up, but no polling or interrupts are done. Or
215 * PHY is in an error state.
216 *
217 * - phy_start moves to RESUMING
218 *
219 * RESUMING: PHY was halted, but now wants to run again.
220 * - If we are forcing, or aneg is done, timer moves to RUNNING
221 * - If aneg is not done, timer moves to AN
222 * - phy_stop moves to HALTED
223 */
224enum phy_state {
225 PHY_DOWN=0,
226 PHY_STARTING,
227 PHY_READY,
228 PHY_PENDING,
229 PHY_UP,
230 PHY_AN,
231 PHY_RUNNING,
232 PHY_NOLINK,
233 PHY_FORCING,
234 PHY_CHANGELINK,
235 PHY_HALTED,
236 PHY_RESUMING
237};
238
Richard Cochranc1f19b52010-07-17 08:49:36 +0000239struct sk_buff;
240
Andy Fleming00db8182005-07-30 19:31:23 -0400241/* phy_device: An instance of a PHY
242 *
243 * drv: Pointer to the driver for this PHY instance
244 * bus: Pointer to the bus this PHY is on
245 * dev: driver model device structure for this PHY
246 * phy_id: UID for this device found during discovery
247 * state: state of the PHY for management purposes
248 * dev_flags: Device-specific flags used by the PHY driver.
249 * addr: Bus address of PHY
250 * link_timeout: The number of timer firings to wait before the
251 * giving up on the current attempt at acquiring a link
252 * irq: IRQ number of the PHY's interrupt (-1 if none)
253 * phy_timer: The timer for handling the state machine
254 * phy_queue: A work_queue for the interrupt
255 * attached_dev: The attached enet driver's device instance ptr
256 * adjust_link: Callback for the enet controller to respond to
257 * changes in the link state.
258 * adjust_state: Callback for the enet driver to respond to
259 * changes in the state machine.
260 *
261 * speed, duplex, pause, supported, advertising, and
262 * autoneg are used like in mii_if_info
263 *
264 * interrupts currently only supports enabled or disabled,
265 * but could be changed in the future to support enabling
266 * and disabling specific interrupts
267 *
268 * Contains some infrastructure for polling and interrupt
269 * handling, as well as handling shifts in PHY hardware state
270 */
271struct phy_device {
272 /* Information about the PHY type */
273 /* And management functions */
274 struct phy_driver *drv;
275
276 struct mii_bus *bus;
277
278 struct device dev;
279
280 u32 phy_id;
281
282 enum phy_state state;
283
284 u32 dev_flags;
285
Andy Fleminge8a2b6a2006-12-01 12:01:06 -0600286 phy_interface_t interface;
287
Peter Meerwaldc6883992010-09-02 04:06:24 +0000288 /* Bus address of the PHY (0-31) */
Andy Fleming00db8182005-07-30 19:31:23 -0400289 int addr;
290
Andy Flemingc5e38a92008-04-09 19:38:27 -0500291 /*
292 * forced speed & duplex (no autoneg)
Andy Fleming00db8182005-07-30 19:31:23 -0400293 * partner speed & duplex & pause (autoneg)
294 */
295 int speed;
296 int duplex;
297 int pause;
298 int asym_pause;
299
300 /* The most recently read link state */
301 int link;
302
303 /* Enabled Interrupts */
304 u32 interrupts;
305
306 /* Union of PHY and Attached devices' supported modes */
307 /* See mii.h for more info */
308 u32 supported;
309 u32 advertising;
310
311 int autoneg;
312
313 int link_timeout;
314
Andy Flemingc5e38a92008-04-09 19:38:27 -0500315 /*
316 * Interrupt number for this PHY
317 * -1 means no interrupt
318 */
Andy Fleming00db8182005-07-30 19:31:23 -0400319 int irq;
320
321 /* private data pointer */
322 /* For use by PHYs to maintain extra state */
323 void *priv;
324
325 /* Interrupt and Polling infrastructure */
326 struct work_struct phy_queue;
Marcin Slusarza390d1f2009-03-13 15:41:19 -0700327 struct delayed_work state_queue;
Maciej W. Rozycki0ac49522007-09-28 22:42:14 -0700328 atomic_t irq_disable;
Andy Fleming00db8182005-07-30 19:31:23 -0400329
Nate Case35b5f6b2008-01-29 10:05:09 -0600330 struct mutex lock;
Andy Fleming00db8182005-07-30 19:31:23 -0400331
332 struct net_device *attached_dev;
333
334 void (*adjust_link)(struct net_device *dev);
335
336 void (*adjust_state)(struct net_device *dev);
337};
338#define to_phy_device(d) container_of(d, struct phy_device, dev)
339
340/* struct phy_driver: Driver structure for a particular PHY type
341 *
342 * phy_id: The result of reading the UID registers of this PHY
343 * type, and ANDing them with the phy_id_mask. This driver
344 * only works for PHYs with IDs which match this field
345 * name: The friendly name of this PHY type
346 * phy_id_mask: Defines the important bits of the phy_id
347 * features: A list of features (speed, duplex, etc) supported
348 * by this PHY
349 * flags: A bitfield defining certain other features this PHY
350 * supports (like interrupts)
351 *
352 * The drivers must implement config_aneg and read_status. All
353 * other functions are optional. Note that none of these
354 * functions should be called from interrupt time. The goal is
355 * for the bus read/write functions to be able to block when the
356 * bus transaction is happening, and be freed up by an interrupt
357 * (The MPC85xx has this ability, though it is not currently
358 * supported in the driver).
359 */
360struct phy_driver {
361 u32 phy_id;
362 char *name;
363 unsigned int phy_id_mask;
364 u32 features;
365 u32 flags;
366
Andy Flemingc5e38a92008-04-09 19:38:27 -0500367 /*
368 * Called to initialize the PHY,
369 * including after a reset
370 */
Andy Fleming00db8182005-07-30 19:31:23 -0400371 int (*config_init)(struct phy_device *phydev);
372
Andy Flemingc5e38a92008-04-09 19:38:27 -0500373 /*
374 * Called during discovery. Used to set
375 * up device-specific structures, if any
376 */
Andy Fleming00db8182005-07-30 19:31:23 -0400377 int (*probe)(struct phy_device *phydev);
378
379 /* PHY Power Management */
380 int (*suspend)(struct phy_device *phydev);
381 int (*resume)(struct phy_device *phydev);
382
Andy Flemingc5e38a92008-04-09 19:38:27 -0500383 /*
384 * Configures the advertisement and resets
Andy Fleming00db8182005-07-30 19:31:23 -0400385 * autonegotiation if phydev->autoneg is on,
386 * forces the speed to the current settings in phydev
Andy Flemingc5e38a92008-04-09 19:38:27 -0500387 * if phydev->autoneg is off
388 */
Andy Fleming00db8182005-07-30 19:31:23 -0400389 int (*config_aneg)(struct phy_device *phydev);
390
391 /* Determines the negotiated speed and duplex */
392 int (*read_status)(struct phy_device *phydev);
393
394 /* Clears any pending interrupts */
395 int (*ack_interrupt)(struct phy_device *phydev);
396
397 /* Enables or disables interrupts */
398 int (*config_intr)(struct phy_device *phydev);
399
Anatolij Gustschina8729eb2009-04-07 02:01:42 +0000400 /*
401 * Checks if the PHY generated an interrupt.
402 * For multi-PHY devices with shared PHY interrupt pin
403 */
404 int (*did_interrupt)(struct phy_device *phydev);
405
Andy Fleming00db8182005-07-30 19:31:23 -0400406 /* Clears up any memory if needed */
407 void (*remove)(struct phy_device *phydev);
408
Richard Cochranc1f19b52010-07-17 08:49:36 +0000409 /* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */
410 int (*hwtstamp)(struct phy_device *phydev, struct ifreq *ifr);
411
412 /*
413 * Requests a Rx timestamp for 'skb'. If the skb is accepted,
414 * the phy driver promises to deliver it using netif_rx() as
415 * soon as a timestamp becomes available. One of the
416 * PTP_CLASS_ values is passed in 'type'. The function must
417 * return true if the skb is accepted for delivery.
418 */
419 bool (*rxtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
420
421 /*
422 * Requests a Tx timestamp for 'skb'. The phy driver promises
Richard Cochranda92b192011-10-21 00:49:15 +0000423 * to deliver it using skb_complete_tx_timestamp() as soon as a
Richard Cochranc1f19b52010-07-17 08:49:36 +0000424 * timestamp becomes available. One of the PTP_CLASS_ values
425 * is passed in 'type'.
426 */
427 void (*txtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
428
Andy Fleming00db8182005-07-30 19:31:23 -0400429 struct device_driver driver;
430};
431#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
432
Andy Flemingf62220d2008-04-18 17:29:54 -0500433#define PHY_ANY_ID "MATCH ANY PHY"
434#define PHY_ANY_UID 0xffffffff
435
436/* A Structure for boards to register fixups with the PHY Lib */
437struct phy_fixup {
438 struct list_head list;
David S. Miller8e401ec2009-05-26 21:16:25 -0700439 char bus_id[20];
Andy Flemingf62220d2008-04-18 17:29:54 -0500440 u32 phy_uid;
441 u32 phy_uid_mask;
442 int (*run)(struct phy_device *phydev);
443};
444
Lennert Buytenhek2e888102008-09-29 17:12:35 +0000445/**
446 * phy_read - Convenience function for reading a given PHY register
447 * @phydev: the phy_device struct
448 * @regnum: register number to read
449 *
450 * NOTE: MUST NOT be called from interrupt context,
451 * because the bus read/write functions may wait for an interrupt
452 * to conclude the operation.
453 */
Jason Gunthorpeabf35df2010-03-09 09:17:42 +0000454static inline int phy_read(struct phy_device *phydev, u32 regnum)
Lennert Buytenhek2e888102008-09-29 17:12:35 +0000455{
456 return mdiobus_read(phydev->bus, phydev->addr, regnum);
457}
458
459/**
460 * phy_write - Convenience function for writing a given PHY register
461 * @phydev: the phy_device struct
462 * @regnum: register number to write
463 * @val: value to write to @regnum
464 *
465 * NOTE: MUST NOT be called from interrupt context,
466 * because the bus read/write functions may wait for an interrupt
467 * to conclude the operation.
468 */
Jason Gunthorpeabf35df2010-03-09 09:17:42 +0000469static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val)
Lennert Buytenhek2e888102008-09-29 17:12:35 +0000470{
471 return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
472}
473
Paul Gortmakercac1f3c2008-04-15 12:49:21 -0400474int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id);
Andy Fleming00db8182005-07-30 19:31:23 -0400475struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
Grant Likely4dea5472009-04-25 12:52:46 +0000476int phy_device_register(struct phy_device *phy);
Anton Vorontsov2f5cb432009-12-30 08:23:30 +0000477int phy_init_hw(struct phy_device *phydev);
Andy Fleminge1393452005-08-24 18:46:21 -0500478struct phy_device * phy_attach(struct net_device *dev,
Andy Flemingf62220d2008-04-18 17:29:54 -0500479 const char *bus_id, u32 flags, phy_interface_t interface);
Jiri Pirkof8f76db2010-02-04 10:23:02 -0800480struct phy_device *phy_find_first(struct mii_bus *bus);
Grant Likelyfa94f6d2009-04-25 12:52:51 +0000481int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
482 void (*handler)(struct net_device *), u32 flags,
483 phy_interface_t interface);
Andy Flemingf62220d2008-04-18 17:29:54 -0500484struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
Andy Fleminge8a2b6a2006-12-01 12:01:06 -0600485 void (*handler)(struct net_device *), u32 flags,
486 phy_interface_t interface);
Andy Fleminge1393452005-08-24 18:46:21 -0500487void phy_disconnect(struct phy_device *phydev);
488void phy_detach(struct phy_device *phydev);
489void phy_start(struct phy_device *phydev);
490void phy_stop(struct phy_device *phydev);
491int phy_start_aneg(struct phy_device *phydev);
492
Andy Fleminge1393452005-08-24 18:46:21 -0500493int phy_stop_interrupts(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400494
495static inline int phy_read_status(struct phy_device *phydev) {
496 return phydev->drv->read_status(phydev);
497}
498
Andy Fleming00db8182005-07-30 19:31:23 -0400499int genphy_restart_aneg(struct phy_device *phydev);
500int genphy_config_aneg(struct phy_device *phydev);
501int genphy_update_link(struct phy_device *phydev);
502int genphy_read_status(struct phy_device *phydev);
Giuseppe Cavallaro0f0ca342008-11-28 16:24:56 -0800503int genphy_suspend(struct phy_device *phydev);
504int genphy_resume(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400505void phy_driver_unregister(struct phy_driver *drv);
506int phy_driver_register(struct phy_driver *new_driver);
Anton Vorontsov4f9c85a2010-01-18 05:37:16 +0000507void phy_state_machine(struct work_struct *work);
Andy Fleming00db8182005-07-30 19:31:23 -0400508void phy_start_machine(struct phy_device *phydev,
509 void (*handler)(struct net_device *));
510void phy_stop_machine(struct phy_device *phydev);
511int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
512int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
513int phy_mii_ioctl(struct phy_device *phydev,
Richard Cochran28b04112010-07-17 08:48:55 +0000514 struct ifreq *ifr, int cmd);
Andy Fleminge1393452005-08-24 18:46:21 -0500515int phy_start_interrupts(struct phy_device *phydev);
516void phy_print_status(struct phy_device *phydev);
Anton Vorontsov6f4a7f42007-12-04 16:17:33 +0300517void phy_device_free(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400518
Andy Flemingf62220d2008-04-18 17:29:54 -0500519int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
520 int (*run)(struct phy_device *));
521int phy_register_fixup_for_id(const char *bus_id,
522 int (*run)(struct phy_device *));
523int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
524 int (*run)(struct phy_device *));
525int phy_scan_fixups(struct phy_device *phydev);
526
Andy Fleming9b9a8bf2008-05-02 13:00:51 -0500527int __init mdio_bus_init(void);
528void mdio_bus_exit(void);
529
Andy Fleming00db8182005-07-30 19:31:23 -0400530extern struct bus_type mdio_bus_type;
Andy Fleming00db8182005-07-30 19:31:23 -0400531#endif /* __PHY_H */