blob: 2cc0fd00463f549082d8836cd041b24c53f3af13 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* header file for DIO boards for the HP300 architecture.
2 * Maybe this should handle DIO-II later?
3 * The general structure of this is vaguely based on how
4 * the Amiga port handles Zorro boards.
5 * Copyright (C) Peter Maydell 05/1998 <pmaydell@chiark.greenend.org.uk>
6 * Converted to driver model Jochen Friedrich <jochen@scram.de>
7 *
8 * The board IDs are from the NetBSD kernel, which for once provided
9 * helpful comments...
10 *
11 * This goes with drivers/dio/dio.c
12 */
13
14#ifndef _LINUX_DIO_H
15#define _LINUX_DIO_H
16
17/* The DIO boards in a system are distinguished by 'select codes' which
18 * range from 0-63 (DIO) and 132-255 (DIO-II).
19 * The DIO board with select code sc is located at physical address
20 * 0x600000 + sc * 0x10000
21 * So DIO cards cover [0x600000-0x800000); the areas [0x200000-0x400000) and
22 * [0x800000-0x1000000) are for additional space required by things
23 * like framebuffers. [0x400000-0x600000) is for miscellaneous internal I/O.
24 * On Linux, this is currently all mapped into the virtual address space
25 * at 0xf0000000 on bootup.
26 * DIO-II boards are at 0x1000000 + (sc - 132) * 0x400000
27 * which is address range [0x1000000-0x20000000) -- too big to map completely,
28 * so currently we just don't handle DIO-II boards. It wouldn't be hard to
29 * do with ioremap() though.
30 */
31
32#include <linux/device.h>
33
34#ifdef __KERNEL__
35
36#include <asm/hp300hw.h>
37
38typedef __u16 dio_id;
39
40 /*
41 * DIO devices
42 */
43
44struct dio_dev {
45 struct dio_bus *bus;
46 dio_id id;
47 int scode;
48 struct dio_driver *driver; /* which driver has allocated this device */
49 struct device dev; /* Generic device interface */
50 u8 ipl;
51 char name[64];
52 struct resource resource;
53};
54
55#define to_dio_dev(n) container_of(n, struct dio_dev, dev)
56
57 /*
58 * DIO bus
59 */
60
61struct dio_bus {
62 struct list_head devices; /* list of devices on this bus */
63 unsigned int num_resources; /* number of resources */
64 struct resource resources[2]; /* address space routed to this bus */
65 struct device dev;
66 char name[10];
67};
68
69extern struct dio_bus dio_bus; /* Single DIO bus */
70extern struct bus_type dio_bus_type;
71
72 /*
73 * DIO device IDs
74 */
75
76struct dio_device_id {
77 dio_id id; /* Device ID or DIO_WILDCARD */
78 unsigned long driver_data; /* Data private to the driver */
79};
80
81 /*
82 * DIO device drivers
83 */
84
85struct dio_driver {
86 struct list_head node;
87 char *name;
88 const struct dio_device_id *id_table; /* NULL if wants all devices */
89 int (*probe)(struct dio_dev *z, const struct dio_device_id *id);
90/* New device inserted */
91 void (*remove)(struct dio_dev *z); /* Device removed (NULL if not a hot-plug capable driver) */
92 struct device_driver driver;
93};
94
95#define to_dio_driver(drv) container_of(drv, struct dio_driver, driver)
96
97/* DIO/DIO-II boards all have the following 8bit registers.
98 * These are offsets from the base of the device.
99 */
100#define DIO_IDOFF 0x01 /* primary device ID */
101#define DIO_IPLOFF 0x03 /* interrupt priority level */
102#define DIO_SECIDOFF 0x15 /* secondary device ID */
103#define DIOII_SIZEOFF 0x101 /* device size, DIO-II only */
104#define DIO_VIRADDRBASE 0xf0000000UL /* vir addr where IOspace is mapped */
105
106#define DIO_BASE 0x600000 /* start of DIO space */
107#define DIO_END 0x1000000 /* end of DIO space */
108#define DIO_DEVSIZE 0x10000 /* size of a DIO device */
109
110#define DIOII_BASE 0x01000000 /* start of DIO-II space */
111#define DIOII_END 0x20000000 /* end of DIO-II space */
112#define DIOII_DEVSIZE 0x00400000 /* size of a DIO-II device */
113
114/* Highest valid select code. If we add DIO-II support this should become
115 * 256 for everything except HP320, which only has DIO.
116 */
117#define DIO_SCMAX (hp300_model == HP_320 ? 32 : 256)
118#define DIOII_SCBASE 132 /* lowest DIO-II select code */
119#define DIO_SCINHOLE(scode) (((scode) >= 32) && ((scode) < DIOII_SCBASE))
120#define DIO_ISDIOII(scode) ((scode) >= 132 && (scode) < 256)
121
122/* macros to read device IDs, given base address */
123#define DIO_ID(baseaddr) in_8((baseaddr) + DIO_IDOFF)
124#define DIO_SECID(baseaddr) in_8((baseaddr) + DIO_SECIDOFF)
125
126/* extract the interrupt level */
127#define DIO_IPL(baseaddr) (((in_8((baseaddr) + DIO_IPLOFF) >> 4) & 0x03) + 3)
128
129/* find the size of a DIO-II board's address space.
130 * DIO boards are all fixed length.
131 */
132#define DIOII_SIZE(baseaddr) ((in_8((baseaddr) + DIOII_SIZEOFF) + 1) * 0x100000)
133
134/* general purpose macro for both DIO and DIO-II */
135#define DIO_SIZE(scode, base) (DIO_ISDIOII((scode)) ? DIOII_SIZE((base)) : DIO_DEVSIZE)
136
137/* The hardware has primary and secondary IDs; we encode these in a single
138 * int as PRIMARY ID & (SECONDARY ID << 8).
139 * In practice this is only important for framebuffers,
140 * and everybody else just sets ID fields equal to the DIO_ID_FOO value.
141 */
142#define DIO_ENCODE_ID(pr,sec) ((((int)sec & 0xff) << 8) | ((int)pr & 0xff))
143/* macro to determine whether a given primary ID requires a secondary ID byte */
144#define DIO_NEEDSSECID(id) ((id) == DIO_ID_FBUFFER)
145#define DIO_WILDCARD 0xff
146
147/* Now a whole slew of macros giving device IDs and descriptive strings: */
148#define DIO_ID_DCA0 0x02 /* 98644A serial */
149#define DIO_DESC_DCA0 "98644A DCA0 serial"
150#define DIO_ID_DCA0REM 0x82 /* 98644A serial */
151#define DIO_DESC_DCA0REM "98644A DCA0REM serial"
152#define DIO_ID_DCA1 0x42 /* 98644A serial */
153#define DIO_DESC_DCA1 "98644A DCA1 serial"
154#define DIO_ID_DCA1REM 0xc2 /* 98644A serial */
155#define DIO_DESC_DCA1REM "98644A DCA1REM serial"
156#define DIO_ID_DCM 0x05 /* 98642A serial MUX */
157#define DIO_DESC_DCM "98642A DCM serial MUX"
158#define DIO_ID_DCMREM 0x85 /* 98642A serial MUX */
159#define DIO_DESC_DCMREM "98642A DCMREM serial MUX"
160#define DIO_ID_LAN 0x15 /* 98643A LAN */
161#define DIO_DESC_LAN "98643A LANCE ethernet"
162#define DIO_ID_FHPIB 0x08 /* 98625A/98625B fast HP-IB */
163#define DIO_DESC_FHPIB "98625A/98625B fast HPIB"
164#define DIO_ID_NHPIB 0x01 /* 98624A HP-IB (normal ie slow) */
165#define DIO_DESC_NHPIB "98624A HPIB"
166#define DIO_ID_SCSI0 0x07 /* 98265A SCSI */
167#define DIO_DESC_SCSI0 "98265A SCSI0"
168#define DIO_ID_SCSI1 0x27 /* ditto */
169#define DIO_DESC_SCSI1 "98265A SCSI1"
170#define DIO_ID_SCSI2 0x47 /* ditto */
171#define DIO_DESC_SCSI2 "98265A SCSI2"
172#define DIO_ID_SCSI3 0x67 /* ditto */
173#define DIO_DESC_SCSI3 "98265A SCSI3"
174#define DIO_ID_FBUFFER 0x39 /* framebuffer: flavour is distinguished by secondary ID */
175#define DIO_DESC_FBUFFER "bitmapped display"
176/* the NetBSD kernel source is a bit unsure as to what these next IDs actually do :-> */
177#define DIO_ID_MISC0 0x03 /* 98622A */
178#define DIO_DESC_MISC0 "98622A"
179#define DIO_ID_MISC1 0x04 /* 98623A */
180#define DIO_DESC_MISC1 "98623A"
181#define DIO_ID_PARALLEL 0x06 /* internal parallel */
182#define DIO_DESC_PARALLEL "internal parallel"
183#define DIO_ID_MISC2 0x09 /* 98287A keyboard */
184#define DIO_DESC_MISC2 "98287A keyboard"
185#define DIO_ID_MISC3 0x0a /* HP98635A FP accelerator */
186#define DIO_DESC_MISC3 "HP98635A FP accelerator"
187#define DIO_ID_MISC4 0x0b /* timer */
188#define DIO_DESC_MISC4 "timer"
189#define DIO_ID_MISC5 0x12 /* 98640A */
190#define DIO_DESC_MISC5 "98640A"
191#define DIO_ID_MISC6 0x16 /* 98659A */
192#define DIO_DESC_MISC6 "98659A"
193#define DIO_ID_MISC7 0x19 /* 237 display */
194#define DIO_DESC_MISC7 "237 display"
195#define DIO_ID_MISC8 0x1a /* quad-wide card */
196#define DIO_DESC_MISC8 "quad-wide card"
197#define DIO_ID_MISC9 0x1b /* 98253A */
198#define DIO_DESC_MISC9 "98253A"
199#define DIO_ID_MISC10 0x1c /* 98627A */
200#define DIO_DESC_MISC10 "98253A"
201#define DIO_ID_MISC11 0x1d /* 98633A */
202#define DIO_DESC_MISC11 "98633A"
203#define DIO_ID_MISC12 0x1e /* 98259A */
204#define DIO_DESC_MISC12 "98259A"
205#define DIO_ID_MISC13 0x1f /* 8741 */
206#define DIO_DESC_MISC13 "8741"
207#define DIO_ID_VME 0x31 /* 98577A VME adapter */
208#define DIO_DESC_VME "98577A VME adapter"
209#define DIO_ID_DCL 0x34 /* 98628A serial */
210#define DIO_DESC_DCL "98628A DCL serial"
211#define DIO_ID_DCLREM 0xb4 /* 98628A serial */
212#define DIO_DESC_DCLREM "98628A DCLREM serial"
213/* These are the secondary IDs for the framebuffers */
214#define DIO_ID2_GATORBOX 0x01 /* 98700/98710 "gatorbox" */
215#define DIO_DESC2_GATORBOX "98700/98710 \"gatorbox\" display"
216#define DIO_ID2_TOPCAT 0x02 /* 98544/98545/98547 "topcat" */
217#define DIO_DESC2_TOPCAT "98544/98545/98547 \"topcat\" display"
218#define DIO_ID2_RENAISSANCE 0x04 /* 98720/98721 "renaissance" */
219#define DIO_DESC2_RENAISSANCE "98720/98721 \"renaissance\" display"
220#define DIO_ID2_LRCATSEYE 0x05 /* lowres "catseye" */
221#define DIO_DESC2_LRCATSEYE "low-res catseye display"
222#define DIO_ID2_HRCCATSEYE 0x06 /* highres colour "catseye" */
223#define DIO_DESC2_HRCCATSEYE "high-res color catseye display"
224#define DIO_ID2_HRMCATSEYE 0x07 /* highres mono "catseye" */
225#define DIO_DESC2_HRMCATSEYE "high-res mono catseye display"
226#define DIO_ID2_DAVINCI 0x08 /* 98730/98731 "davinci" */
227#define DIO_DESC2_DAVINCI "98730/98731 \"davinci\" display"
228#define DIO_ID2_XXXCATSEYE 0x09 /* "catseye" */
229#define DIO_DESC2_XXXCATSEYE "catseye display"
230#define DIO_ID2_HYPERION 0x0e /* A1096A "hyperion" */
231#define DIO_DESC2_HYPERION "A1096A \"hyperion\" display"
232#define DIO_ID2_XGENESIS 0x0b /* "x-genesis"; no NetBSD support */
233#define DIO_DESC2_XGENESIS "\"x-genesis\" display"
234#define DIO_ID2_TIGER 0x0c /* "tiger"; no NetBSD support */
235#define DIO_DESC2_TIGER "\"tiger\" display"
236#define DIO_ID2_YGENESIS 0x0d /* "y-genesis"; no NetBSD support */
237#define DIO_DESC2_YGENESIS "\"y-genesis\" display"
238/* if you add new IDs then you should tell dio.c about them so it can
239 * identify them...
240 */
241
242extern int dio_find(int deviceid);
243extern unsigned long dio_scodetophysaddr(int scode);
Geert Uytterhoeven2e4c77b2008-12-30 14:16:41 +0100244extern int dio_create_sysfs_dev_files(struct dio_dev *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700245
246/* New-style probing */
247extern int dio_register_driver(struct dio_driver *);
248extern void dio_unregister_driver(struct dio_driver *);
249extern const struct dio_device_id *dio_match_device(const struct dio_device_id *ids, const struct dio_dev *z);
250static inline struct dio_driver *dio_dev_driver(const struct dio_dev *d)
251{
252 return d->driver;
253}
254
255#define dio_resource_start(d) ((d)->resource.start)
256#define dio_resource_end(d) ((d)->resource.end)
Joe Perches28f65c112011-06-09 09:13:32 -0700257#define dio_resource_len(d) (resource_size(&(d)->resource))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700258#define dio_resource_flags(d) ((d)->resource.flags)
259
260#define dio_request_device(d, name) \
261 request_mem_region(dio_resource_start(d), dio_resource_len(d), name)
262#define dio_release_device(d) \
263 release_mem_region(dio_resource_start(d), dio_resource_len(d))
264
265/* Similar to the helpers above, these manipulate per-dio_dev
266 * driver-specific data. They are really just a wrapper around
267 * the generic device structure functions of these calls.
268 */
269static inline void *dio_get_drvdata (struct dio_dev *d)
270{
271 return dev_get_drvdata(&d->dev);
272}
273
274static inline void dio_set_drvdata (struct dio_dev *d, void *data)
275{
276 dev_set_drvdata(&d->dev, data);
277}
278
Linus Torvalds1da177e2005-04-16 15:20:36 -0700279#endif /* __KERNEL__ */
280#endif /* ndef _LINUX_DIO_H */