blob: 6f2fe26279165ff1b8e26821cfd243d0ab79a214 [file] [log] [blame]
Kumar Gala4f6160d2014-07-16 11:10:08 -05001/*
2 * Copyright (c) 2014, The Linux Foundation. All rights reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 and
6 * only version 2 as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
12 */
13
14#include <linux/io.h>
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/of.h>
18#include <linux/of_address.h>
19#include <linux/time.h>
20#include <linux/delay.h>
21#include <linux/clk.h>
22#include <linux/slab.h>
23#include <linux/platform_device.h>
24#include <linux/phy/phy.h>
25
26struct qcom_ipq806x_sata_phy {
27 void __iomem *mmio;
28 struct clk *cfg_clk;
29 struct device *dev;
30};
31
32#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b))
33
34#define SATA_PHY_P0_PARAM0 0x200
35#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(x) __set(x, 17, 12)
36#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK GENMASK(17, 12)
37#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2(x) __set(x, 11, 6)
38#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK GENMASK(11, 6)
39#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1(x) __set(x, 5, 0)
40#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK GENMASK(5, 0)
41
42#define SATA_PHY_P0_PARAM1 0x204
43#define SATA_PHY_P0_PARAM1_RESERVED_BITS31_21(x) __set(x, 31, 21)
44#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(x) __set(x, 20, 14)
45#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK GENMASK(20, 14)
46#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(x) __set(x, 13, 7)
47#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK GENMASK(13, 7)
48#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(x) __set(x, 6, 0)
49#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK GENMASK(6, 0)
50
51#define SATA_PHY_P0_PARAM2 0x208
52#define SATA_PHY_P0_PARAM2_RX_EQ(x) __set(x, 20, 18)
53#define SATA_PHY_P0_PARAM2_RX_EQ_MASK GENMASK(20, 18)
54
55#define SATA_PHY_P0_PARAM3 0x20C
56#define SATA_PHY_SSC_EN 0x8
57#define SATA_PHY_P0_PARAM4 0x210
58#define SATA_PHY_REF_SSP_EN 0x2
59#define SATA_PHY_RESET 0x1
60
61static int qcom_ipq806x_sata_phy_init(struct phy *generic_phy)
62{
63 struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy);
64 u32 reg;
65
66 /* Setting SSC_EN to 1 */
67 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM3);
68 reg = reg | SATA_PHY_SSC_EN;
69 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM3);
70
71 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM0) &
72 ~(SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK |
73 SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK |
74 SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK);
75 reg |= SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(0xf);
76 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM0);
77
78 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM1) &
79 ~(SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK |
80 SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK |
81 SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK);
82 reg |= SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(0x55) |
83 SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(0x55) |
84 SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(0x55);
85 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM1);
86
87 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM2) &
88 ~SATA_PHY_P0_PARAM2_RX_EQ_MASK;
89 reg |= SATA_PHY_P0_PARAM2_RX_EQ(0x3);
90 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM2);
91
92 /* Setting PHY_RESET to 1 */
93 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
94 reg = reg | SATA_PHY_RESET;
95 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
96
97 /* Setting REF_SSP_EN to 1 */
98 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
99 reg = reg | SATA_PHY_REF_SSP_EN | SATA_PHY_RESET;
100 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
101
102 /* make sure all changes complete before we let the PHY out of reset */
103 mb();
104
105 /* sleep for max. 50us more to combine processor wakeups */
106 usleep_range(20, 20 + 50);
107
108 /* Clearing PHY_RESET to 0 */
109 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
110 reg = reg & ~SATA_PHY_RESET;
111 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
112
113 return 0;
114}
115
116static int qcom_ipq806x_sata_phy_exit(struct phy *generic_phy)
117{
118 struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy);
119 u32 reg;
120
121 /* Setting PHY_RESET to 1 */
122 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
123 reg = reg | SATA_PHY_RESET;
124 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
125
126 return 0;
127}
128
129static struct phy_ops qcom_ipq806x_sata_phy_ops = {
130 .init = qcom_ipq806x_sata_phy_init,
131 .exit = qcom_ipq806x_sata_phy_exit,
132 .owner = THIS_MODULE,
133};
134
135static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev)
136{
137 struct qcom_ipq806x_sata_phy *phy;
138 struct device *dev = &pdev->dev;
139 struct resource *res;
140 struct phy_provider *phy_provider;
141 struct phy *generic_phy;
142 int ret;
143
144 phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
145 if (!phy)
146 return -ENOMEM;
147
148 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
149 phy->mmio = devm_ioremap_resource(dev, res);
150 if (IS_ERR(phy->mmio))
151 return PTR_ERR(phy->mmio);
152
Heikki Krogerusdbc98632014-11-19 17:28:21 +0200153 generic_phy = devm_phy_create(dev, NULL, &qcom_ipq806x_sata_phy_ops);
Kumar Gala4f6160d2014-07-16 11:10:08 -0500154 if (IS_ERR(generic_phy)) {
155 dev_err(dev, "%s: failed to create phy\n", __func__);
156 return PTR_ERR(generic_phy);
157 }
158
159 phy->dev = dev;
160 phy_set_drvdata(generic_phy, phy);
161 platform_set_drvdata(pdev, phy);
162
163 phy->cfg_clk = devm_clk_get(dev, "cfg");
164 if (IS_ERR(phy->cfg_clk)) {
165 dev_err(dev, "Failed to get sata cfg clock\n");
166 return PTR_ERR(phy->cfg_clk);
167 }
168
169 ret = clk_prepare_enable(phy->cfg_clk);
170 if (ret)
171 return ret;
172
173 phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
174 if (IS_ERR(phy_provider)) {
175 clk_disable_unprepare(phy->cfg_clk);
176 dev_err(dev, "%s: failed to register phy\n", __func__);
177 return PTR_ERR(phy_provider);
178 }
179
180 return 0;
181}
182
183static int qcom_ipq806x_sata_phy_remove(struct platform_device *pdev)
184{
185 struct qcom_ipq806x_sata_phy *phy = platform_get_drvdata(pdev);
186
187 clk_disable_unprepare(phy->cfg_clk);
188
189 return 0;
190}
191
192static const struct of_device_id qcom_ipq806x_sata_phy_of_match[] = {
193 { .compatible = "qcom,ipq806x-sata-phy" },
194 { },
195};
196MODULE_DEVICE_TABLE(of, qcom_ipq806x_sata_phy_of_match);
197
198static struct platform_driver qcom_ipq806x_sata_phy_driver = {
199 .probe = qcom_ipq806x_sata_phy_probe,
200 .remove = qcom_ipq806x_sata_phy_remove,
201 .driver = {
202 .name = "qcom-ipq806x-sata-phy",
Kumar Gala4f6160d2014-07-16 11:10:08 -0500203 .of_match_table = qcom_ipq806x_sata_phy_of_match,
204 }
205};
206module_platform_driver(qcom_ipq806x_sata_phy_driver);
207
208MODULE_DESCRIPTION("QCOM IPQ806x SATA PHY driver");
209MODULE_LICENSE("GPL v2");