blob: 0677139c60654e1a350bce46f7f9e28634e87105 [file] [log] [blame]
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +01001/*
2 * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8])
3 * Device Connect handling
4 *
5 * Copyright (C) 2006 Intel Corporation
6 * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License version
10 * 2 as published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
20 * 02110-1301, USA.
21 *
22 *
23 * FIXME: docs
24 * FIXME: this file needs to be broken up, it's grown too big
25 *
26 *
27 * WUSB1.0[7.1, 7.5.1, ]
28 *
29 * WUSB device connection is kind of messy. Some background:
30 *
31 * When a device wants to connect it scans the UWB radio channels
32 * looking for a WUSB Channel; a WUSB channel is defined by MMCs
33 * (Micro Managed Commands or something like that) [see
34 * Design-overview for more on this] .
35 *
36 * So, device scans the radio, finds MMCs and thus a host and checks
37 * when the next DNTS is. It sends a Device Notification Connect
38 * (DN_Connect); the host picks it up (through nep.c and notif.c, ends
39 * up in wusb_devconnect_ack(), which creates a wusb_dev structure in
40 * wusbhc->port[port_number].wusb_dev), assigns an unauth address
41 * to the device (this means from 0x80 to 0xfe) and sends, in the MMC
42 * a Connect Ack Information Element (ConnAck IE).
43 *
44 * So now the device now has a WUSB address. From now on, we use
45 * that to talk to it in the RPipes.
46 *
47 * ASSUMPTIONS:
48 *
49 * - We use the the as device address the port number where it is
50 * connected (port 0 doesn't exist). For unauth, it is 128 + that.
51 *
52 * ROADMAP:
53 *
54 * This file contains the logic for doing that--entry points:
55 *
56 * wusb_devconnect_ack() Ack a device until _acked() called.
57 * Called by notif.c:wusb_handle_dn_connect()
58 * when a DN_Connect is received.
59 *
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +010060 * wusb_devconnect_acked() Ack done, release resources.
61 *
62 * wusb_handle_dn_alive() Called by notif.c:wusb_handle_dn()
63 * for processing a DN_Alive pong from a device.
64 *
65 * wusb_handle_dn_disconnect()Called by notif.c:wusb_handle_dn() to
66 * process a disconenct request from a
67 * device.
68 *
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +010069 * __wusb_dev_disable() Called by rh.c:wusbhc_rh_clear_port_feat() when
70 * disabling a port.
71 *
72 * wusb_devconnect_create() Called when creating the host by
73 * lc.c:wusbhc_create().
74 *
75 * wusb_devconnect_destroy() Cleanup called removing the host. Called
76 * by lc.c:wusbhc_destroy().
77 *
78 * Each Wireless USB host maintains a list of DN_Connect requests
79 * (actually we maintain a list of pending Connect Acks, the
80 * wusbhc->ca_list).
81 *
82 * LIFE CYCLE OF port->wusb_dev
83 *
84 * Before the @wusbhc structure put()s the reference it owns for
85 * port->wusb_dev [and clean the wusb_dev pointer], it needs to
86 * lock @wusbhc->mutex.
87 */
88
89#include <linux/jiffies.h>
90#include <linux/ctype.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090091#include <linux/slab.h>
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +010092#include <linux/workqueue.h>
Paul Gortmakerf940fcd2011-05-27 09:56:31 -040093#include <linux/export.h>
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +010094#include "wusbhc.h"
95
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +010096static void wusbhc_devconnect_acked_work(struct work_struct *work);
97
98static void wusb_dev_free(struct wusb_dev *wusb_dev)
99{
Thomas Pugliese471e42a2013-12-02 15:39:45 -0600100 kfree(wusb_dev);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100101}
102
103static struct wusb_dev *wusb_dev_alloc(struct wusbhc *wusbhc)
104{
105 struct wusb_dev *wusb_dev;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100106
107 wusb_dev = kzalloc(sizeof(*wusb_dev), GFP_KERNEL);
108 if (wusb_dev == NULL)
109 goto err;
110
111 wusb_dev->wusbhc = wusbhc;
112
113 INIT_WORK(&wusb_dev->devconnect_acked_work, wusbhc_devconnect_acked_work);
114
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100115 return wusb_dev;
116err:
117 wusb_dev_free(wusb_dev);
118 return NULL;
119}
120
121
122/*
123 * Using the Connect-Ack list, fill out the @wusbhc Connect-Ack WUSB IE
124 * properly so that it can be added to the MMC.
125 *
126 * We just get the @wusbhc->ca_list and fill out the first four ones or
127 * less (per-spec WUSB1.0[7.5, before T7-38). If the ConnectAck WUSB
128 * IE is not allocated, we alloc it.
129 *
130 * @wusbhc->mutex must be taken
131 */
132static void wusbhc_fill_cack_ie(struct wusbhc *wusbhc)
133{
134 unsigned cnt;
135 struct wusb_dev *dev_itr;
136 struct wuie_connect_ack *cack_ie;
137
138 cack_ie = &wusbhc->cack_ie;
139 cnt = 0;
140 list_for_each_entry(dev_itr, &wusbhc->cack_list, cack_node) {
141 cack_ie->blk[cnt].CDID = dev_itr->cdid;
142 cack_ie->blk[cnt].bDeviceAddress = dev_itr->addr;
143 if (++cnt >= WUIE_ELT_MAX)
144 break;
145 }
146 cack_ie->hdr.bLength = sizeof(cack_ie->hdr)
147 + cnt * sizeof(cack_ie->blk[0]);
148}
149
150/*
151 * Register a new device that wants to connect
152 *
153 * A new device wants to connect, so we add it to the Connect-Ack
154 * list. We give it an address in the unauthorized range (bit 8 set);
155 * user space will have to drive authorization further on.
156 *
157 * @dev_addr: address to use for the device (which is also the port
158 * number).
159 *
160 * @wusbhc->mutex must be taken
161 */
162static struct wusb_dev *wusbhc_cack_add(struct wusbhc *wusbhc,
163 struct wusb_dn_connect *dnc,
164 const char *pr_cdid, u8 port_idx)
165{
166 struct device *dev = wusbhc->dev;
167 struct wusb_dev *wusb_dev;
168 int new_connection = wusb_dn_connect_new_connection(dnc);
169 u8 dev_addr;
170 int result;
171
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100172 /* Is it registered already? */
173 list_for_each_entry(wusb_dev, &wusbhc->cack_list, cack_node)
174 if (!memcmp(&wusb_dev->cdid, &dnc->CDID,
175 sizeof(wusb_dev->cdid)))
176 return wusb_dev;
177 /* We don't have it, create an entry, register it */
178 wusb_dev = wusb_dev_alloc(wusbhc);
David Vrabel8092d7c2008-10-16 13:56:53 +0100179 if (wusb_dev == NULL)
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100180 return NULL;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100181 wusb_dev_init(wusb_dev);
182 wusb_dev->cdid = dnc->CDID;
183 wusb_dev->port_idx = port_idx;
184
185 /*
186 * Devices are always available within the cluster reservation
187 * and since the hardware will take the intersection of the
188 * per-device availability and the cluster reservation, the
189 * per-device availability can simply be set to always
190 * available.
191 */
192 bitmap_fill(wusb_dev->availability.bm, UWB_NUM_MAS);
193
194 /* FIXME: handle reconnects instead of assuming connects are
195 always new. */
196 if (1 && new_connection == 0)
197 new_connection = 1;
198 if (new_connection) {
199 dev_addr = (port_idx + 2) | WUSB_DEV_ADDR_UNAUTH;
200
201 dev_info(dev, "Connecting new WUSB device to address %u, "
202 "port %u\n", dev_addr, port_idx);
203
204 result = wusb_set_dev_addr(wusbhc, wusb_dev, dev_addr);
Anderson Lizardof51c23b2008-09-17 16:34:31 +0100205 if (result < 0)
206 return NULL;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100207 }
208 wusb_dev->entry_ts = jiffies;
209 list_add_tail(&wusb_dev->cack_node, &wusbhc->cack_list);
210 wusbhc->cack_count++;
211 wusbhc_fill_cack_ie(wusbhc);
David Vrabelbce83692008-12-22 18:22:50 +0000212
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100213 return wusb_dev;
214}
215
216/*
217 * Remove a Connect-Ack context entry from the HCs view
218 *
219 * @wusbhc->mutex must be taken
220 */
221static void wusbhc_cack_rm(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
222{
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100223 list_del_init(&wusb_dev->cack_node);
224 wusbhc->cack_count--;
225 wusbhc_fill_cack_ie(wusbhc);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100226}
227
228/*
229 * @wusbhc->mutex must be taken */
230static
231void wusbhc_devconnect_acked(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
232{
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100233 wusbhc_cack_rm(wusbhc, wusb_dev);
234 if (wusbhc->cack_count)
235 wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr);
236 else
237 wusbhc_mmcie_rm(wusbhc, &wusbhc->cack_ie.hdr);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100238}
239
240static void wusbhc_devconnect_acked_work(struct work_struct *work)
241{
242 struct wusb_dev *wusb_dev = container_of(work, struct wusb_dev,
243 devconnect_acked_work);
244 struct wusbhc *wusbhc = wusb_dev->wusbhc;
245
246 mutex_lock(&wusbhc->mutex);
247 wusbhc_devconnect_acked(wusbhc, wusb_dev);
248 mutex_unlock(&wusbhc->mutex);
David Vrabel5936ac72009-04-08 17:36:32 +0000249
250 wusb_dev_put(wusb_dev);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100251}
252
253/*
254 * Ack a device for connection
255 *
256 * FIXME: docs
257 *
258 * @pr_cdid: Printable CDID...hex Use @dnc->cdid for the real deal.
259 *
260 * So we get the connect ack IE (may have been allocated already),
261 * find an empty connect block, an empty virtual port, create an
262 * address with it (see below), make it an unauth addr [bit 7 set] and
263 * set the MMC.
264 *
265 * Addresses: because WUSB hosts have no downstream hubs, we can do a
266 * 1:1 mapping between 'port number' and device
267 * address. This simplifies many things, as during this
Rahul Bedarkar1076e7a2014-01-04 12:37:52 +0530268 * initial connect phase the USB stack has no knowledge of
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100269 * the device and hasn't assigned an address yet--we know
Rahul Bedarkar1076e7a2014-01-04 12:37:52 +0530270 * USB's choose_address() will use the same heuristics we
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100271 * use here, so we can assume which address will be assigned.
272 *
273 * USB stack always assigns address 1 to the root hub, so
274 * to the port number we add 2 (thus virtual port #0 is
275 * addr #2).
276 *
277 * @wusbhc shall be referenced
278 */
279static
280void wusbhc_devconnect_ack(struct wusbhc *wusbhc, struct wusb_dn_connect *dnc,
281 const char *pr_cdid)
282{
283 int result;
284 struct device *dev = wusbhc->dev;
285 struct wusb_dev *wusb_dev;
286 struct wusb_port *port;
Thomas Pugliese927c4da2014-02-28 21:54:37 -0600287 unsigned idx;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100288
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100289 mutex_lock(&wusbhc->mutex);
290
291 /* Check we are not handling it already */
292 for (idx = 0; idx < wusbhc->ports_max; idx++) {
293 port = wusb_port_by_idx(wusbhc, idx);
294 if (port->wusb_dev
David Vrabel8092d7c2008-10-16 13:56:53 +0100295 && memcmp(&dnc->CDID, &port->wusb_dev->cdid, sizeof(dnc->CDID)) == 0)
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100296 goto error_unlock;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100297 }
298 /* Look up those fake ports we have for a free one */
299 for (idx = 0; idx < wusbhc->ports_max; idx++) {
300 port = wusb_port_by_idx(wusbhc, idx);
301 if ((port->status & USB_PORT_STAT_POWER)
302 && !(port->status & USB_PORT_STAT_CONNECTION))
303 break;
304 }
305 if (idx >= wusbhc->ports_max) {
306 dev_err(dev, "Host controller can't connect more devices "
307 "(%u already connected); device %s rejected\n",
308 wusbhc->ports_max, pr_cdid);
309 /* NOTE: we could send a WUIE_Disconnect here, but we haven't
310 * event acked, so the device will eventually timeout the
311 * connection, right? */
312 goto error_unlock;
313 }
314
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100315 /* Make sure we are using no crypto on that "virtual port" */
316 wusbhc->set_ptk(wusbhc, idx, 0, NULL, 0);
317
318 /* Grab a filled in Connect-Ack context, fill out the
319 * Connect-Ack Wireless USB IE, set the MMC */
320 wusb_dev = wusbhc_cack_add(wusbhc, dnc, pr_cdid, idx);
321 if (wusb_dev == NULL)
322 goto error_unlock;
323 result = wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr);
324 if (result < 0)
325 goto error_unlock;
326 /* Give the device at least 2ms (WUSB1.0[7.5.1p3]), let's do
327 * three for a good measure */
328 msleep(3);
329 port->wusb_dev = wusb_dev;
330 port->status |= USB_PORT_STAT_CONNECTION;
331 port->change |= USB_PORT_STAT_C_CONNECTION;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100332 /* Now the port status changed to connected; khubd will
333 * pick the change up and try to reset the port to bring it to
334 * the enabled state--so this process returns up to the stack
David Vrabel4656d5d2008-10-27 17:12:33 +0000335 * and it calls back into wusbhc_rh_port_reset().
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100336 */
337error_unlock:
338 mutex_unlock(&wusbhc->mutex);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100339 return;
340
341}
342
343/*
344 * Disconnect a Wireless USB device from its fake port
345 *
346 * Marks the port as disconnected so that khubd can pick up the change
347 * and drops our knowledge about the device.
348 *
349 * Assumes there is a device connected
350 *
351 * @port_index: zero based port number
352 *
353 * NOTE: @wusbhc->mutex is locked
354 *
355 * WARNING: From here it is not very safe to access anything hanging off
356 * wusb_dev
357 */
358static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc,
359 struct wusb_port *port)
360{
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100361 struct wusb_dev *wusb_dev = port->wusb_dev;
362
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100363 port->status &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE
364 | USB_PORT_STAT_SUSPEND | USB_PORT_STAT_RESET
365 | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED);
366 port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE;
367 if (wusb_dev) {
David Vrabel9a9b1d12009-01-06 17:58:02 +0000368 dev_dbg(wusbhc->dev, "disconnecting device from port %d\n", wusb_dev->port_idx);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100369 if (!list_empty(&wusb_dev->cack_node))
370 list_del_init(&wusb_dev->cack_node);
371 /* For the one in cack_add() */
372 wusb_dev_put(wusb_dev);
373 }
374 port->wusb_dev = NULL;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100375
376 /* After a device disconnects, change the GTK (see [WUSB]
377 * section 6.2.11.2). */
David Vrabel8db324e2009-04-08 17:36:33 +0000378 if (wusbhc->active)
379 wusbhc_gtk_rekey(wusbhc);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100380
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100381 /* The Wireless USB part has forgotten about the device already; now
382 * khubd's timer will pick up the disconnection and remove the USB
383 * device from the system
384 */
385}
386
387/*
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100388 * Refresh the list of keep alives to emit in the MMC
389 *
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100390 * We only publish the first four devices that have a coming timeout
391 * condition. Then when we are done processing those, we go for the
392 * next ones. We ignore the ones that have timed out already (they'll
393 * be purged).
394 *
395 * This might cause the first devices to timeout the last devices in
396 * the port array...FIXME: come up with a better algorithm?
397 *
398 * Note we can't do much about MMC's ops errors; we hope next refresh
399 * will kind of handle it.
400 *
401 * NOTE: @wusbhc->mutex is locked
402 */
403static void __wusbhc_keep_alive(struct wusbhc *wusbhc)
404{
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100405 struct device *dev = wusbhc->dev;
406 unsigned cnt;
407 struct wusb_dev *wusb_dev;
408 struct wusb_port *wusb_port;
409 struct wuie_keep_alive *ie = &wusbhc->keep_alive_ie;
410 unsigned keep_alives, old_keep_alives;
411
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100412 old_keep_alives = ie->hdr.bLength - sizeof(ie->hdr);
413 keep_alives = 0;
414 for (cnt = 0;
David Vrabela23b6482010-03-22 14:50:14 +0000415 keep_alives < WUIE_ELT_MAX && cnt < wusbhc->ports_max;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100416 cnt++) {
417 unsigned tt = msecs_to_jiffies(wusbhc->trust_timeout);
418
419 wusb_port = wusb_port_by_idx(wusbhc, cnt);
420 wusb_dev = wusb_port->wusb_dev;
421
422 if (wusb_dev == NULL)
423 continue;
Thomas Pugliesef4042c02013-12-02 15:39:43 -0600424 if (wusb_dev->usb_dev == NULL)
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100425 continue;
426
427 if (time_after(jiffies, wusb_dev->entry_ts + tt)) {
428 dev_err(dev, "KEEPALIVE: device %u timed out\n",
429 wusb_dev->addr);
430 __wusbhc_dev_disconnect(wusbhc, wusb_port);
Thomas Pugliese7d9852a2013-06-06 10:40:49 -0500431 } else if (time_after(jiffies, wusb_dev->entry_ts + tt/3)) {
432 /* Approaching timeout cut off, need to refresh */
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100433 ie->bDeviceAddress[keep_alives++] = wusb_dev->addr;
434 }
435 }
436 if (keep_alives & 0x1) /* pad to even number ([WUSB] section 7.5.9) */
437 ie->bDeviceAddress[keep_alives++] = 0x7f;
438 ie->hdr.bLength = sizeof(ie->hdr) +
439 keep_alives*sizeof(ie->bDeviceAddress[0]);
David Vrabel8092d7c2008-10-16 13:56:53 +0100440 if (keep_alives > 0)
441 wusbhc_mmcie_set(wusbhc, 10, 5, &ie->hdr);
442 else if (old_keep_alives != 0)
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100443 wusbhc_mmcie_rm(wusbhc, &ie->hdr);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100444}
445
446/*
447 * Do a run through all devices checking for timeouts
448 */
449static void wusbhc_keep_alive_run(struct work_struct *ws)
450{
Jean Delvarebf6aede2009-04-02 16:56:54 -0700451 struct delayed_work *dw = to_delayed_work(ws);
David Vrabel56968d02008-11-25 14:23:40 +0000452 struct wusbhc *wusbhc = container_of(dw, struct wusbhc, keep_alive_timer);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100453
David Vrabel56968d02008-11-25 14:23:40 +0000454 mutex_lock(&wusbhc->mutex);
455 __wusbhc_keep_alive(wusbhc);
456 mutex_unlock(&wusbhc->mutex);
457
458 queue_delayed_work(wusbd, &wusbhc->keep_alive_timer,
459 msecs_to_jiffies(wusbhc->trust_timeout / 2));
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100460}
461
462/*
463 * Find the wusb_dev from its device address.
464 *
465 * The device can be found directly from the address (see
466 * wusb_cack_add() for where the device address is set to port_idx
467 * +2), except when the address is zero.
468 */
469static struct wusb_dev *wusbhc_find_dev_by_addr(struct wusbhc *wusbhc, u8 addr)
470{
471 int p;
472
473 if (addr == 0xff) /* unconnected */
474 return NULL;
475
476 if (addr > 0) {
477 int port = (addr & ~0x80) - 2;
478 if (port < 0 || port >= wusbhc->ports_max)
479 return NULL;
480 return wusb_port_by_idx(wusbhc, port)->wusb_dev;
481 }
482
483 /* Look for the device with address 0. */
484 for (p = 0; p < wusbhc->ports_max; p++) {
485 struct wusb_dev *wusb_dev = wusb_port_by_idx(wusbhc, p)->wusb_dev;
486 if (wusb_dev && wusb_dev->addr == addr)
487 return wusb_dev;
488 }
489 return NULL;
490}
491
492/*
493 * Handle a DN_Alive notification (WUSB1.0[7.6.1])
494 *
495 * This just updates the device activity timestamp and then refreshes
496 * the keep alive IE.
497 *
498 * @wusbhc shall be referenced and unlocked
499 */
Thomas Pugliese6161ae52013-12-02 15:39:44 -0600500static void wusbhc_handle_dn_alive(struct wusbhc *wusbhc, u8 srcaddr)
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100501{
Thomas Pugliese6161ae52013-12-02 15:39:44 -0600502 struct wusb_dev *wusb_dev;
503
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100504 mutex_lock(&wusbhc->mutex);
Thomas Pugliese6161ae52013-12-02 15:39:44 -0600505 wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr);
506 if (wusb_dev == NULL) {
507 dev_dbg(wusbhc->dev, "ignoring DN_Alive from unconnected device %02x\n",
508 srcaddr);
509 } else {
510 wusb_dev->entry_ts = jiffies;
511 __wusbhc_keep_alive(wusbhc);
512 }
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100513 mutex_unlock(&wusbhc->mutex);
514}
515
516/*
517 * Handle a DN_Connect notification (WUSB1.0[7.6.1])
518 *
519 * @wusbhc
520 * @pkt_hdr
521 * @size: Size of the buffer where the notification resides; if the
522 * notification data suggests there should be more data than
523 * available, an error will be signaled and the whole buffer
524 * consumed.
525 *
526 * @wusbhc->mutex shall be held
527 */
528static void wusbhc_handle_dn_connect(struct wusbhc *wusbhc,
529 struct wusb_dn_hdr *dn_hdr,
530 size_t size)
531{
532 struct device *dev = wusbhc->dev;
533 struct wusb_dn_connect *dnc;
534 char pr_cdid[WUSB_CKHDID_STRSIZE];
535 static const char *beacon_behaviour[] = {
536 "reserved",
537 "self-beacon",
538 "directed-beacon",
539 "no-beacon"
540 };
541
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100542 if (size < sizeof(*dnc)) {
543 dev_err(dev, "DN CONNECT: short notification (%zu < %zu)\n",
544 size, sizeof(*dnc));
David Vrabelbce83692008-12-22 18:22:50 +0000545 return;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100546 }
547
548 dnc = container_of(dn_hdr, struct wusb_dn_connect, hdr);
549 ckhdid_printf(pr_cdid, sizeof(pr_cdid), &dnc->CDID);
550 dev_info(dev, "DN CONNECT: device %s @ %x (%s) wants to %s\n",
551 pr_cdid,
552 wusb_dn_connect_prev_dev_addr(dnc),
553 beacon_behaviour[wusb_dn_connect_beacon_behavior(dnc)],
554 wusb_dn_connect_new_connection(dnc) ? "connect" : "reconnect");
555 /* ACK the connect */
556 wusbhc_devconnect_ack(wusbhc, dnc, pr_cdid);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100557}
558
559/*
560 * Handle a DN_Disconnect notification (WUSB1.0[7.6.1])
561 *
562 * Device is going down -- do the disconnect.
563 *
564 * @wusbhc shall be referenced and unlocked
565 */
Thomas Pugliese6161ae52013-12-02 15:39:44 -0600566static void wusbhc_handle_dn_disconnect(struct wusbhc *wusbhc, u8 srcaddr)
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100567{
568 struct device *dev = wusbhc->dev;
Thomas Pugliese6161ae52013-12-02 15:39:44 -0600569 struct wusb_dev *wusb_dev;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100570
571 mutex_lock(&wusbhc->mutex);
Thomas Pugliese6161ae52013-12-02 15:39:44 -0600572 wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr);
573 if (wusb_dev == NULL) {
574 dev_dbg(dev, "ignoring DN DISCONNECT from unconnected device %02x\n",
575 srcaddr);
576 } else {
577 dev_info(dev, "DN DISCONNECT: device 0x%02x going down\n",
578 wusb_dev->addr);
579 __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc,
580 wusb_dev->port_idx));
581 }
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100582 mutex_unlock(&wusbhc->mutex);
583}
584
585/*
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100586 * Handle a Device Notification coming a host
587 *
588 * The Device Notification comes from a host (HWA, DWA or WHCI)
589 * wrapped in a set of headers. Somebody else has peeled off those
590 * headers for us and we just get one Device Notifications.
591 *
592 * Invalid DNs (e.g., too short) are discarded.
593 *
594 * @wusbhc shall be referenced
595 *
596 * FIXMES:
597 * - implement priorities as in WUSB1.0[Table 7-55]?
598 */
599void wusbhc_handle_dn(struct wusbhc *wusbhc, u8 srcaddr,
600 struct wusb_dn_hdr *dn_hdr, size_t size)
601{
602 struct device *dev = wusbhc->dev;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100603
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100604 if (size < sizeof(struct wusb_dn_hdr)) {
605 dev_err(dev, "DN data shorter than DN header (%d < %d)\n",
606 (int)size, (int)sizeof(struct wusb_dn_hdr));
David Vrabelbce83692008-12-22 18:22:50 +0000607 return;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100608 }
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100609 switch (dn_hdr->bType) {
610 case WUSB_DN_CONNECT:
611 wusbhc_handle_dn_connect(wusbhc, dn_hdr, size);
612 break;
613 case WUSB_DN_ALIVE:
Thomas Pugliese6161ae52013-12-02 15:39:44 -0600614 wusbhc_handle_dn_alive(wusbhc, srcaddr);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100615 break;
616 case WUSB_DN_DISCONNECT:
Thomas Pugliese6161ae52013-12-02 15:39:44 -0600617 wusbhc_handle_dn_disconnect(wusbhc, srcaddr);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100618 break;
619 case WUSB_DN_MASAVAILCHANGED:
620 case WUSB_DN_RWAKE:
621 case WUSB_DN_SLEEP:
622 /* FIXME: handle these DNs. */
623 break;
624 case WUSB_DN_EPRDY:
625 /* The hardware handles these. */
626 break;
627 default:
628 dev_warn(dev, "unknown DN %u (%d octets) from %u\n",
629 dn_hdr->bType, (int)size, srcaddr);
630 }
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100631}
632EXPORT_SYMBOL_GPL(wusbhc_handle_dn);
633
634/*
635 * Disconnect a WUSB device from a the cluster
636 *
637 * @wusbhc
638 * @port Fake port where the device is (wusbhc index, not USB port number).
639 *
640 * In Wireless USB, a disconnect is basically telling the device he is
641 * being disconnected and forgetting about him.
642 *
643 * We send the device a Device Disconnect IE (WUSB1.0[7.5.11]) for 100
644 * ms and then keep going.
645 *
646 * We don't do much in case of error; we always pretend we disabled
647 * the port and disconnected the device. If physically the request
648 * didn't get there (many things can fail in the way there), the stack
649 * will reject the device's communication attempts.
650 *
651 * @wusbhc should be refcounted and locked
652 */
653void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port_idx)
654{
655 int result;
656 struct device *dev = wusbhc->dev;
657 struct wusb_dev *wusb_dev;
658 struct wuie_disconnect *ie;
659
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100660 wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev;
661 if (wusb_dev == NULL) {
662 /* reset no device? ignore */
663 dev_dbg(dev, "DISCONNECT: no device at port %u, ignoring\n",
664 port_idx);
David Vrabelbce83692008-12-22 18:22:50 +0000665 return;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100666 }
667 __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx));
668
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100669 ie = kzalloc(sizeof(*ie), GFP_KERNEL);
670 if (ie == NULL)
David Vrabelbce83692008-12-22 18:22:50 +0000671 return;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100672 ie->hdr.bLength = sizeof(*ie);
673 ie->hdr.bIEIdentifier = WUIE_ID_DEVICE_DISCONNECT;
674 ie->bDeviceAddress = wusb_dev->addr;
675 result = wusbhc_mmcie_set(wusbhc, 0, 0, &ie->hdr);
David Vrabelbce83692008-12-22 18:22:50 +0000676 if (result < 0)
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100677 dev_err(dev, "DISCONNECT: can't set MMC: %d\n", result);
David Vrabelbce83692008-12-22 18:22:50 +0000678 else {
679 /* At least 6 MMCs, assuming at least 1 MMC per zone. */
680 msleep(7*4);
681 wusbhc_mmcie_rm(wusbhc, &ie->hdr);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100682 }
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100683 kfree(ie);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100684}
685
686/*
687 * Walk over the BOS descriptor, verify and grok it
688 *
689 * @usb_dev: referenced
690 * @wusb_dev: referenced and unlocked
691 *
692 * The BOS descriptor is defined at WUSB1.0[7.4.1], and it defines a
693 * "flexible" way to wrap all kinds of descriptors inside an standard
694 * descriptor (wonder why they didn't use normal descriptors,
695 * btw). Not like they lack code.
696 *
697 * At the end we go to look for the WUSB Device Capabilities
698 * (WUSB1.0[7.4.1.1]) that is wrapped in a device capability descriptor
699 * that is part of the BOS descriptor set. That tells us what does the
700 * device support (dual role, beacon type, UWB PHY rates).
701 */
702static int wusb_dev_bos_grok(struct usb_device *usb_dev,
703 struct wusb_dev *wusb_dev,
704 struct usb_bos_descriptor *bos, size_t desc_size)
705{
706 ssize_t result;
707 struct device *dev = &usb_dev->dev;
708 void *itr, *top;
709
710 /* Walk over BOS capabilities, verify them */
711 itr = (void *)bos + sizeof(*bos);
712 top = itr + desc_size - sizeof(*bos);
713 while (itr < top) {
714 struct usb_dev_cap_header *cap_hdr = itr;
715 size_t cap_size;
716 u8 cap_type;
717 if (top - itr < sizeof(*cap_hdr)) {
718 dev_err(dev, "Device BUG? premature end of BOS header "
719 "data [offset 0x%02x]: only %zu bytes left\n",
720 (int)(itr - (void *)bos), top - itr);
721 result = -ENOSPC;
722 goto error_bad_cap;
723 }
724 cap_size = cap_hdr->bLength;
725 cap_type = cap_hdr->bDevCapabilityType;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100726 if (cap_size == 0)
727 break;
728 if (cap_size > top - itr) {
729 dev_err(dev, "Device BUG? premature end of BOS data "
730 "[offset 0x%02x cap %02x %zu bytes]: "
731 "only %zu bytes left\n",
732 (int)(itr - (void *)bos),
733 cap_type, cap_size, top - itr);
734 result = -EBADF;
735 goto error_bad_cap;
736 }
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100737 switch (cap_type) {
738 case USB_CAP_TYPE_WIRELESS_USB:
739 if (cap_size != sizeof(*wusb_dev->wusb_cap_descr))
740 dev_err(dev, "Device BUG? WUSB Capability "
741 "descriptor is %zu bytes vs %zu "
742 "needed\n", cap_size,
743 sizeof(*wusb_dev->wusb_cap_descr));
David Vrabelbce83692008-12-22 18:22:50 +0000744 else
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100745 wusb_dev->wusb_cap_descr = itr;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100746 break;
747 default:
748 dev_err(dev, "BUG? Unknown BOS capability 0x%02x "
749 "(%zu bytes) at offset 0x%02x\n", cap_type,
750 cap_size, (int)(itr - (void *)bos));
751 }
752 itr += cap_size;
753 }
754 result = 0;
755error_bad_cap:
756 return result;
757}
758
759/*
760 * Add information from the BOS descriptors to the device
761 *
762 * @usb_dev: referenced
763 * @wusb_dev: referenced and unlocked
764 *
765 * So what we do is we alloc a space for the BOS descriptor of 64
766 * bytes; read the first four bytes which include the wTotalLength
767 * field (WUSB1.0[T7-26]) and if it fits in those 64 bytes, read the
768 * whole thing. If not we realloc to that size.
769 *
770 * Then we call the groking function, that will fill up
771 * wusb_dev->wusb_cap_descr, which is what we'll need later on.
772 */
773static int wusb_dev_bos_add(struct usb_device *usb_dev,
774 struct wusb_dev *wusb_dev)
775{
776 ssize_t result;
777 struct device *dev = &usb_dev->dev;
778 struct usb_bos_descriptor *bos;
779 size_t alloc_size = 32, desc_size = 4;
780
781 bos = kmalloc(alloc_size, GFP_KERNEL);
782 if (bos == NULL)
783 return -ENOMEM;
784 result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size);
785 if (result < 4) {
786 dev_err(dev, "Can't get BOS descriptor or too short: %zd\n",
787 result);
788 goto error_get_descriptor;
789 }
790 desc_size = le16_to_cpu(bos->wTotalLength);
791 if (desc_size >= alloc_size) {
792 kfree(bos);
793 alloc_size = desc_size;
794 bos = kmalloc(alloc_size, GFP_KERNEL);
795 if (bos == NULL)
796 return -ENOMEM;
797 }
798 result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size);
799 if (result < 0 || result != desc_size) {
800 dev_err(dev, "Can't get BOS descriptor or too short (need "
801 "%zu bytes): %zd\n", desc_size, result);
802 goto error_get_descriptor;
803 }
804 if (result < sizeof(*bos)
805 || le16_to_cpu(bos->wTotalLength) != desc_size) {
806 dev_err(dev, "Can't get BOS descriptor or too short (need "
807 "%zu bytes): %zd\n", desc_size, result);
808 goto error_get_descriptor;
809 }
David Vrabelbce83692008-12-22 18:22:50 +0000810
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100811 result = wusb_dev_bos_grok(usb_dev, wusb_dev, bos, result);
812 if (result < 0)
813 goto error_bad_bos;
814 wusb_dev->bos = bos;
815 return 0;
816
817error_bad_bos:
818error_get_descriptor:
819 kfree(bos);
820 wusb_dev->wusb_cap_descr = NULL;
821 return result;
822}
823
824static void wusb_dev_bos_rm(struct wusb_dev *wusb_dev)
825{
826 kfree(wusb_dev->bos);
827 wusb_dev->wusb_cap_descr = NULL;
828};
829
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100830/*
831 * USB stack's device addition Notifier Callback
832 *
833 * Called from drivers/usb/core/hub.c when a new device is added; we
834 * use this hook to perform certain WUSB specific setup work on the
835 * new device. As well, it is the first time we can connect the
836 * wusb_dev and the usb_dev. So we note it down in wusb_dev and take a
837 * reference that we'll drop.
838 *
839 * First we need to determine if the device is a WUSB device (else we
Greg Kroah-Hartman551cdbb2010-01-14 11:08:04 -0800840 * ignore it). For that we use the speed setting (USB_SPEED_WIRELESS)
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100841 * [FIXME: maybe we'd need something more definitive]. If so, we track
842 * it's usb_busd and from there, the WUSB HC.
843 *
844 * Because all WUSB HCs are contained in a 'struct wusbhc', voila, we
845 * get the wusbhc for the device.
846 *
847 * We have a reference on @usb_dev (as we are called at the end of its
848 * enumeration).
849 *
850 * NOTE: @usb_dev locked
851 */
852static void wusb_dev_add_ncb(struct usb_device *usb_dev)
853{
854 int result = 0;
855 struct wusb_dev *wusb_dev;
856 struct wusbhc *wusbhc;
857 struct device *dev = &usb_dev->dev;
858 u8 port_idx;
859
860 if (usb_dev->wusb == 0 || usb_dev->devnum == 1)
861 return; /* skip non wusb and wusb RHs */
862
David Vrabel6da9c992009-02-18 14:43:47 +0000863 usb_set_device_state(usb_dev, USB_STATE_UNAUTHENTICATED);
864
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100865 wusbhc = wusbhc_get_by_usb_dev(usb_dev);
866 if (wusbhc == NULL)
867 goto error_nodev;
868 mutex_lock(&wusbhc->mutex);
869 wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev);
870 port_idx = wusb_port_no_to_idx(usb_dev->portnum);
871 mutex_unlock(&wusbhc->mutex);
872 if (wusb_dev == NULL)
873 goto error_nodev;
874 wusb_dev->usb_dev = usb_get_dev(usb_dev);
875 usb_dev->wusb_dev = wusb_dev_get(wusb_dev);
876 result = wusb_dev_sec_add(wusbhc, usb_dev, wusb_dev);
877 if (result < 0) {
878 dev_err(dev, "Cannot enable security: %d\n", result);
879 goto error_sec_add;
880 }
881 /* Now query the device for it's BOS and attach it to wusb_dev */
882 result = wusb_dev_bos_add(usb_dev, wusb_dev);
883 if (result < 0) {
884 dev_err(dev, "Cannot get BOS descriptors: %d\n", result);
885 goto error_bos_add;
886 }
887 result = wusb_dev_sysfs_add(wusbhc, usb_dev, wusb_dev);
888 if (result < 0)
889 goto error_add_sysfs;
890out:
891 wusb_dev_put(wusb_dev);
892 wusbhc_put(wusbhc);
893error_nodev:
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100894 return;
895
896 wusb_dev_sysfs_rm(wusb_dev);
897error_add_sysfs:
898 wusb_dev_bos_rm(wusb_dev);
899error_bos_add:
900 wusb_dev_sec_rm(wusb_dev);
901error_sec_add:
902 mutex_lock(&wusbhc->mutex);
903 __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx));
904 mutex_unlock(&wusbhc->mutex);
905 goto out;
906}
907
908/*
909 * Undo all the steps done at connection by the notifier callback
910 *
911 * NOTE: @usb_dev locked
912 */
913static void wusb_dev_rm_ncb(struct usb_device *usb_dev)
914{
915 struct wusb_dev *wusb_dev = usb_dev->wusb_dev;
916
917 if (usb_dev->wusb == 0 || usb_dev->devnum == 1)
918 return; /* skip non wusb and wusb RHs */
919
920 wusb_dev_sysfs_rm(wusb_dev);
921 wusb_dev_bos_rm(wusb_dev);
922 wusb_dev_sec_rm(wusb_dev);
923 wusb_dev->usb_dev = NULL;
924 usb_dev->wusb_dev = NULL;
925 wusb_dev_put(wusb_dev);
926 usb_put_dev(usb_dev);
927}
928
929/*
930 * Handle notifications from the USB stack (notifier call back)
931 *
932 * This is called when the USB stack does a
933 * usb_{bus,device}_{add,remove}() so we can do WUSB specific
934 * handling. It is called with [for the case of
935 * USB_DEVICE_{ADD,REMOVE} with the usb_dev locked.
936 */
937int wusb_usb_ncb(struct notifier_block *nb, unsigned long val,
938 void *priv)
939{
940 int result = NOTIFY_OK;
941
942 switch (val) {
943 case USB_DEVICE_ADD:
944 wusb_dev_add_ncb(priv);
945 break;
946 case USB_DEVICE_REMOVE:
947 wusb_dev_rm_ncb(priv);
948 break;
949 case USB_BUS_ADD:
950 /* ignore (for now) */
951 case USB_BUS_REMOVE:
952 break;
953 default:
954 WARN_ON(1);
955 result = NOTIFY_BAD;
Joe Perches2b84f922013-10-08 16:01:37 -0700956 }
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100957 return result;
958}
959
960/*
961 * Return a referenced wusb_dev given a @wusbhc and @usb_dev
962 */
963struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *wusbhc,
964 struct usb_device *usb_dev)
965{
966 struct wusb_dev *wusb_dev;
967 u8 port_idx;
968
969 port_idx = wusb_port_no_to_idx(usb_dev->portnum);
970 BUG_ON(port_idx > wusbhc->ports_max);
971 wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev;
972 if (wusb_dev != NULL) /* ops, device is gone */
973 wusb_dev_get(wusb_dev);
974 return wusb_dev;
975}
976EXPORT_SYMBOL_GPL(__wusb_dev_get_by_usb_dev);
977
978void wusb_dev_destroy(struct kref *_wusb_dev)
979{
David Vrabelbce83692008-12-22 18:22:50 +0000980 struct wusb_dev *wusb_dev = container_of(_wusb_dev, struct wusb_dev, refcnt);
981
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100982 list_del_init(&wusb_dev->cack_node);
983 wusb_dev_free(wusb_dev);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100984}
985EXPORT_SYMBOL_GPL(wusb_dev_destroy);
986
987/*
988 * Create all the device connect handling infrastructure
989 *
990 * This is basically the device info array, Connect Acknowledgement
991 * (cack) lists, keep-alive timers (and delayed work thread).
992 */
993int wusbhc_devconnect_create(struct wusbhc *wusbhc)
994{
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +0100995 wusbhc->keep_alive_ie.hdr.bIEIdentifier = WUIE_ID_KEEP_ALIVE;
996 wusbhc->keep_alive_ie.hdr.bLength = sizeof(wusbhc->keep_alive_ie.hdr);
997 INIT_DELAYED_WORK(&wusbhc->keep_alive_timer, wusbhc_keep_alive_run);
998
999 wusbhc->cack_ie.hdr.bIEIdentifier = WUIE_ID_CONNECTACK;
1000 wusbhc->cack_ie.hdr.bLength = sizeof(wusbhc->cack_ie.hdr);
1001 INIT_LIST_HEAD(&wusbhc->cack_list);
1002
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +01001003 return 0;
1004}
1005
1006/*
1007 * Release all resources taken by the devconnect stuff
1008 */
1009void wusbhc_devconnect_destroy(struct wusbhc *wusbhc)
1010{
David Vrabelbce83692008-12-22 18:22:50 +00001011 /* no op */
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +01001012}
1013
1014/*
1015 * wusbhc_devconnect_start - start accepting device connections
1016 * @wusbhc: the WUSB HC
1017 *
1018 * Sets the Host Info IE to accept all new connections.
1019 *
1020 * FIXME: This also enables the keep alives but this is not necessary
1021 * until there are connected and authenticated devices.
1022 */
David Vrabel6fae35f2008-11-17 15:53:42 +00001023int wusbhc_devconnect_start(struct wusbhc *wusbhc)
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +01001024{
1025 struct device *dev = wusbhc->dev;
1026 struct wuie_host_info *hi;
1027 int result;
1028
1029 hi = kzalloc(sizeof(*hi), GFP_KERNEL);
1030 if (hi == NULL)
1031 return -ENOMEM;
1032
1033 hi->hdr.bLength = sizeof(*hi);
1034 hi->hdr.bIEIdentifier = WUIE_ID_HOST_INFO;
1035 hi->attributes = cpu_to_le16((wusbhc->rsv->stream << 3) | WUIE_HI_CAP_ALL);
David Vrabel6fae35f2008-11-17 15:53:42 +00001036 hi->CHID = wusbhc->chid;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +01001037 result = wusbhc_mmcie_set(wusbhc, 0, 0, &hi->hdr);
1038 if (result < 0) {
1039 dev_err(dev, "Cannot add Host Info MMCIE: %d\n", result);
1040 goto error_mmcie_set;
1041 }
1042 wusbhc->wuie_host_info = hi;
1043
1044 queue_delayed_work(wusbd, &wusbhc->keep_alive_timer,
Thomas Pugliese7d9852a2013-06-06 10:40:49 -05001045 msecs_to_jiffies(wusbhc->trust_timeout / 2));
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +01001046
1047 return 0;
1048
1049error_mmcie_set:
1050 kfree(hi);
1051 return result;
1052}
1053
1054/*
1055 * wusbhc_devconnect_stop - stop managing connected devices
1056 * @wusbhc: the WUSB HC
1057 *
David Vrabel8db324e2009-04-08 17:36:33 +00001058 * Disconnects any devices still connected, stops the keep alives and
1059 * removes the Host Info IE.
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +01001060 */
1061void wusbhc_devconnect_stop(struct wusbhc *wusbhc)
1062{
David Vrabel8db324e2009-04-08 17:36:33 +00001063 int i;
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +01001064
David Vrabel8db324e2009-04-08 17:36:33 +00001065 mutex_lock(&wusbhc->mutex);
1066 for (i = 0; i < wusbhc->ports_max; i++) {
1067 if (wusbhc->port[i].wusb_dev)
1068 __wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]);
1069 }
1070 mutex_unlock(&wusbhc->mutex);
1071
1072 cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +01001073 wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr);
1074 kfree(wusbhc->wuie_host_info);
1075 wusbhc->wuie_host_info = NULL;
1076}
1077
1078/*
1079 * wusb_set_dev_addr - set the WUSB device address used by the host
1080 * @wusbhc: the WUSB HC the device is connect to
1081 * @wusb_dev: the WUSB device
1082 * @addr: new device address
1083 */
1084int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, u8 addr)
1085{
1086 int result;
1087
1088 wusb_dev->addr = addr;
1089 result = wusbhc->dev_info_set(wusbhc, wusb_dev);
Anderson Lizardof51c23b2008-09-17 16:34:31 +01001090 if (result < 0)
Inaky Perez-Gonzalezb69fada2008-09-17 16:34:24 +01001091 dev_err(wusbhc->dev, "device %d: failed to set device "
1092 "address\n", wusb_dev->port_idx);
1093 else
1094 dev_info(wusbhc->dev, "device %d: %s addr %u\n",
1095 wusb_dev->port_idx,
1096 (addr & WUSB_DEV_ADDR_UNAUTH) ? "unauth" : "auth",
1097 wusb_dev->addr);
1098
1099 return result;
1100}