blob: b2f969bc7845e66b903c48f07e16c21fbc214629 [file] [log] [blame]
Russell Kingcb5a6ff2005-05-12 14:04:59 +02001/*
2 * linux/sound/arm/aaci.c - ARM PrimeCell AACI PL041 driver
3 *
4 * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10#ifndef AACI_H
11#define AACI_H
12
13/*
14 * Control and status register offsets
15 * P39.
16 */
17#define AACI_CSCH1 0x000
18#define AACI_CSCH2 0x014
19#define AACI_CSCH3 0x028
20#define AACI_CSCH4 0x03c
21
22#define AACI_RXCR 0x000 /* 29 bits Control Rx FIFO */
23#define AACI_TXCR 0x004 /* 17 bits Control Tx FIFO */
24#define AACI_SR 0x008 /* 12 bits Status */
25#define AACI_ISR 0x00c /* 7 bits Int Status */
26#define AACI_IE 0x010 /* 7 bits Int Enable */
27
28/*
29 * Other registers
30 */
31#define AACI_SL1RX 0x050
32#define AACI_SL1TX 0x054
33#define AACI_SL2RX 0x058
34#define AACI_SL2TX 0x05c
35#define AACI_SL12RX 0x060
36#define AACI_SL12TX 0x064
37#define AACI_SLFR 0x068 /* slot flags */
38#define AACI_SLISTAT 0x06c /* slot interrupt status */
39#define AACI_SLIEN 0x070 /* slot interrupt enable */
40#define AACI_INTCLR 0x074 /* interrupt clear */
41#define AACI_MAINCR 0x078 /* main control */
42#define AACI_RESET 0x07c /* reset control */
43#define AACI_SYNC 0x080 /* sync control */
44#define AACI_ALLINTS 0x084 /* all fifo interrupt status */
45#define AACI_MAINFR 0x088 /* main flag register */
46#define AACI_DR1 0x090 /* data read/written fifo 1 */
47#define AACI_DR2 0x0b0 /* data read/written fifo 2 */
48#define AACI_DR3 0x0d0 /* data read/written fifo 3 */
49#define AACI_DR4 0x0f0 /* data read/written fifo 4 */
50
51/*
52 * transmit fifo control register. P48
53 */
54#define TXCR_FEN (1 << 16) /* fifo enable */
55#define TXCR_COMPACT (1 << 15) /* compact mode */
56#define TXCR_TSZ16 (0 << 13) /* 16 bits */
57#define TXCR_TSZ18 (1 << 13) /* 18 bits */
58#define TXCR_TSZ20 (2 << 13) /* 20 bits */
59#define TXCR_TSZ12 (3 << 13) /* 12 bits */
60#define TXCR_TX12 (1 << 12) /* transmits slot 12 */
61#define TXCR_TX11 (1 << 11) /* transmits slot 12 */
62#define TXCR_TX10 (1 << 10) /* transmits slot 12 */
63#define TXCR_TX9 (1 << 9) /* transmits slot 12 */
64#define TXCR_TX8 (1 << 8) /* transmits slot 12 */
65#define TXCR_TX7 (1 << 7) /* transmits slot 12 */
66#define TXCR_TX6 (1 << 6) /* transmits slot 12 */
67#define TXCR_TX5 (1 << 5) /* transmits slot 12 */
68#define TXCR_TX4 (1 << 4) /* transmits slot 12 */
69#define TXCR_TX3 (1 << 3) /* transmits slot 12 */
70#define TXCR_TX2 (1 << 2) /* transmits slot 12 */
71#define TXCR_TX1 (1 << 1) /* transmits slot 12 */
72#define TXCR_TXEN (1 << 0) /* transmit enable */
73
74/*
75 * status register bits. P49
76 */
77#define SR_RXTOFE (1 << 11) /* rx timeout fifo empty */
78#define SR_TXTO (1 << 10) /* rx timeout fifo nonempty */
79#define SR_TXU (1 << 9) /* tx underrun */
80#define SR_RXO (1 << 8) /* rx overrun */
81#define SR_TXB (1 << 7) /* tx busy */
82#define SR_RXB (1 << 6) /* rx busy */
83#define SR_TXFF (1 << 5) /* tx fifo full */
84#define SR_RXFF (1 << 4) /* rx fifo full */
85#define SR_TXHE (1 << 3) /* tx fifo half empty */
86#define SR_RXHF (1 << 2) /* rx fifo half full */
87#define SR_TXFE (1 << 1) /* tx fifo empty */
88#define SR_RXFE (1 << 0) /* rx fifo empty */
89
90/*
91 * interrupt status register bits.
92 */
93#define ISR_RXTOFEINTR (1 << 6) /* rx fifo empty */
94#define ISR_URINTR (1 << 5) /* tx underflow */
95#define ISR_ORINTR (1 << 4) /* rx overflow */
96#define ISR_RXINTR (1 << 3) /* rx fifo */
97#define ISR_TXINTR (1 << 2) /* tx fifo intr */
98#define ISR_RXTOINTR (1 << 1) /* tx timeout */
99#define ISR_TXCINTR (1 << 0) /* tx complete */
100
101/*
102 * interrupt enable register bits.
103 */
104#define IE_RXTOIE (1 << 6)
105#define IE_URIE (1 << 5)
106#define IE_ORIE (1 << 4)
107#define IE_RXIE (1 << 3)
108#define IE_TXIE (1 << 2)
109#define IE_RXTIE (1 << 1)
110#define IE_TXCIE (1 << 0)
111
112/*
113 * interrupt status. P51
114 */
115#define ISR_RXTOFE (1 << 6) /* rx timeout fifo empty */
116#define ISR_UR (1 << 5) /* tx fifo underrun */
117#define ISR_OR (1 << 4) /* rx fifo overrun */
118#define ISR_RX (1 << 3) /* rx interrupt status */
119#define ISR_TX (1 << 2) /* tx interrupt status */
120#define ISR_RXTO (1 << 1) /* rx timeout */
121#define ISR_TXC (1 << 0) /* tx complete */
122
123/*
124 * interrupt enable. P52
125 */
126#define IE_RXTOFE (1 << 6) /* rx timeout fifo empty */
127#define IE_UR (1 << 5) /* tx fifo underrun */
128#define IE_OR (1 << 4) /* rx fifo overrun */
129#define IE_RX (1 << 3) /* rx interrupt status */
130#define IE_TX (1 << 2) /* tx interrupt status */
131#define IE_RXTO (1 << 1) /* rx timeout */
132#define IE_TXC (1 << 0) /* tx complete */
133
134/*
135 * slot flag register bits. P56
136 */
137#define SLFR_RWIS (1 << 13) /* raw wake-up interrupt status */
138#define SLFR_RGPIOINTR (1 << 12) /* raw gpio interrupt */
139#define SLFR_12TXE (1 << 11) /* slot 12 tx empty */
140#define SLFR_12RXV (1 << 10) /* slot 12 rx valid */
141#define SLFR_2TXE (1 << 9) /* slot 2 tx empty */
142#define SLFR_2RXV (1 << 8) /* slot 2 rx valid */
143#define SLFR_1TXE (1 << 7) /* slot 1 tx empty */
144#define SLFR_1RXV (1 << 6) /* slot 1 rx valid */
145#define SLFR_12TXB (1 << 5) /* slot 12 tx busy */
146#define SLFR_12RXB (1 << 4) /* slot 12 rx busy */
147#define SLFR_2TXB (1 << 3) /* slot 2 tx busy */
148#define SLFR_2RXB (1 << 2) /* slot 2 rx busy */
149#define SLFR_1TXB (1 << 1) /* slot 1 tx busy */
150#define SLFR_1RXB (1 << 0) /* slot 1 rx busy */
151
152/*
153 * Interrupt clear register.
154 */
155#define ICLR_RXTOFEC4 (1 << 12)
156#define ICLR_RXTOFEC3 (1 << 11)
157#define ICLR_RXTOFEC2 (1 << 10)
158#define ICLR_RXTOFEC1 (1 << 9)
159#define ICLR_TXUEC4 (1 << 8)
160#define ICLR_TXUEC3 (1 << 7)
161#define ICLR_TXUEC2 (1 << 6)
162#define ICLR_TXUEC1 (1 << 5)
163#define ICLR_RXOEC4 (1 << 4)
164#define ICLR_RXOEC3 (1 << 3)
165#define ICLR_RXOEC2 (1 << 2)
166#define ICLR_RXOEC1 (1 << 1)
167#define ICLR_WISC (1 << 0)
168
169/*
170 * Main control register bits. P62
171 */
172#define MAINCR_SCRA(x) ((x) << 10) /* secondary codec reg access */
173#define MAINCR_DMAEN (1 << 9) /* dma enable */
174#define MAINCR_SL12TXEN (1 << 8) /* slot 12 transmit enable */
175#define MAINCR_SL12RXEN (1 << 7) /* slot 12 receive enable */
176#define MAINCR_SL2TXEN (1 << 6) /* slot 2 transmit enable */
177#define MAINCR_SL2RXEN (1 << 5) /* slot 2 receive enable */
178#define MAINCR_SL1TXEN (1 << 4) /* slot 1 transmit enable */
179#define MAINCR_SL1RXEN (1 << 3) /* slot 1 receive enable */
180#define MAINCR_LPM (1 << 2) /* low power mode */
181#define MAINCR_LOOPBK (1 << 1) /* loopback */
182#define MAINCR_IE (1 << 0) /* aaci interface enable */
183
184/*
185 * Reset register bits. P65
186 */
187#define RESET_NRST (1 << 0)
188
189/*
190 * Sync register bits. P65
191 */
192#define SYNC_FORCE (1 << 0)
193
194/*
195 * Main flag register bits. P66
196 */
197#define MAINFR_TXB (1 << 1) /* transmit busy */
198#define MAINFR_RXB (1 << 0) /* receive busy */
199
200
201
202struct aaci_runtime {
viro@ZenIV.linux.org.uke12ba642005-09-06 02:06:57 +0100203 void __iomem *base;
204 void __iomem *fifo;
Russell Kingcb5a6ff2005-05-12 14:04:59 +0200205
206 struct ac97_pcm *pcm;
207 int pcm_open;
208
209 u32 cr;
210 snd_pcm_substream_t *substream;
211
212 /*
213 * PIO support
214 */
215 void *start;
216 void *end;
217 void *ptr;
218 int bytes;
219 unsigned int period;
220 unsigned int fifosz;
221};
222
223struct aaci {
224 struct amba_device *dev;
225 snd_card_t *card;
viro@ZenIV.linux.org.uke12ba642005-09-06 02:06:57 +0100226 void __iomem *base;
Russell Kingcb5a6ff2005-05-12 14:04:59 +0200227 unsigned int fifosize;
228
229 /* AC'97 */
230 struct semaphore ac97_sem;
231 ac97_bus_t *ac97_bus;
232
233 u32 maincr;
234 spinlock_t lock;
235
236 struct aaci_runtime playback;
237 struct aaci_runtime capture;
238
239 snd_pcm_t *pcm;
240};
241
242#define ACSTREAM_FRONT 0
243#define ACSTREAM_SURROUND 1
244#define ACSTREAM_LFE 2
245
246#endif