scripts/link-vmlinux.sh

#!/bin/sh
#
# link vmlinux
#
# vmlinux is linked from the objects selected by $(KBUILD_VMLINUX_INIT) and
# $(KBUILD_VMLINUX_MAIN). Most are built-in.o files from top-level directories
# in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
# Ordering when linking is important, and $(KBUILD_VMLINUX_INIT) must be first.
#
# vmlinux
#   ^
#   |
#   +-< $(KBUILD_VMLINUX_INIT)
#   |   +--< init/version.o + more
#   |
#   +--< $(KBUILD_VMLINUX_MAIN)
#   |    +--< drivers/built-in.o mm/built-in.o + more
#   |
#   +-< ${kallsymso} (see description in KALLSYMS section)
#
# vmlinux version (uname -v) cannot be updated during normal
# descending-into-subdirs phase since we do not yet know if we need to
# update vmlinux.
# Therefore this step is delayed until just before final link of vmlinux.
#
# System.map is generated to document addresses of all kernel symbols

# Error out on error
set -e

# Nice output in kbuild format
# Will be supressed by "make -s"
info()
{
	if [ "${quiet}" != "silent_" ]; then
		printf "  %-7s %s\n" ${1} ${2}
	fi
}

# Thin archive build here makes a final archive with
# symbol table and indexes from vmlinux objects, which can be
# used as input to linker.
#
# Traditional incremental style of link does not require this step
#
# built-in.o output file
#
archive_builtin()
{
	if [ -n "${CONFIG_THIN_ARCHIVES}" ]; then
		info AR built-in.o
		rm -f built-in.o;
		${AR} rcsT${KBUILD_ARFLAGS} built-in.o			\
					${KBUILD_VMLINUX_INIT}		\
					${KBUILD_VMLINUX_MAIN}

		if [ -n "${CONFIG_LTO_CLANG}" ]; then
			mv -f built-in.o built-in.o.tmp
			${LLVM_AR} rcsT${KBUILD_ARFLAGS} built-in.o $(${AR} t built-in.o.tmp)
			rm -f built-in.o.tmp
		fi
	fi
}

# If CONFIG_LTO_CLANG is selected, collect generated symbol versions into
# .tmp_symversions
modversions()
{
	if [ -z "${CONFIG_LTO_CLANG}" ]; then
		return
	fi

	if [ -z "${CONFIG_MODVERSIONS}" ]; then
		return
	fi

	rm -f .tmp_symversions

	for a in built-in.o ${KBUILD_VMLINUX_LIBS}; do
		for o in $(${AR} t $a); do
			if [ -f ${o}.symversions ]; then
				cat ${o}.symversions >> .tmp_symversions
			fi
		done
	done

	echo "-T .tmp_symversions"
}

# Link of vmlinux.o used for section mismatch analysis
# ${1} output file
modpost_link()
{
	local objects

	if [ -n "${CONFIG_THIN_ARCHIVES}" ]; then
		objects="--whole-archive built-in.o"
	else
		objects="${KBUILD_VMLINUX_INIT}				\
			--start-group					\
			${KBUILD_VMLINUX_MAIN}				\
			--end-group"
	fi

	if [ -n "${CONFIG_LTO_CLANG}" ]; then
		# This might take a while, so indicate that we're doing
		# an LTO link
		info LTO vmlinux.o
	else
		info LD vmlinux.o
	fi

	${LD} ${LDFLAGS} -r -o ${1} $(modversions) ${objects}
}

# If CONFIG_LTO_CLANG is selected, we postpone running recordmcount until
# we have compiled LLVM IR to an object file.
recordmcount()
{
	if [ -z "${CONFIG_LTO_CLANG}" ]; then
		return
	fi

	if [ -n "${CONFIG_FTRACE_MCOUNT_RECORD}" ]; then
		scripts/recordmcount ${RECORDMCOUNT_FLAGS} $*
	fi
}

# Link of vmlinux
# ${1} - optional extra .o files
# ${2} - output file
vmlinux_link()
{
	local lds="${objtree}/${KBUILD_LDS}"
	local objects

	if [ "${SRCARCH}" != "um" ]; then
		local ld=${LD}
		local ldflags="${LDFLAGS} ${LDFLAGS_vmlinux}"

		if [ -n "${LDFINAL_vmlinux}" ]; then
			ld=${LDFINAL_vmlinux}
			ldflags="${LDFLAGS_FINAL_vmlinux} ${LDFLAGS_vmlinux}"
		fi

		if [[ -n "${CONFIG_THIN_ARCHIVES}" && -z "${CONFIG_LTO_CLANG}" ]]; then
			objects="--whole-archive built-in.o ${1}"
		else
			objects="${KBUILD_VMLINUX_INIT}			\
				--start-group				\
				${KBUILD_VMLINUX_MAIN}			\
				--end-group				\
				${1}"
		fi

		${ld} ${ldflags} -o ${2} -T ${lds} ${objects}
	else
		if [ -n "${CONFIG_THIN_ARCHIVES}" ]; then
			objects="-Wl,--whole-archive built-in.o ${1}"
		else
			objects="${KBUILD_VMLINUX_INIT}			\
				-Wl,--start-group			\
				${KBUILD_VMLINUX_MAIN}			\
				-Wl,--end-group				\
				${1}"
		fi

		${CC} ${CFLAGS_vmlinux} -o ${2}				\
			-Wl,-T,${lds}					\
			${objects}					\
			-lutil -lrt -lpthread
		rm -f linux
	fi
}

# Create ${2} .o file with all symbols from the ${1} object file
kallsyms()
{
	info KSYM ${2}
	local kallsymopt;

	if [ -n "${CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX}" ]; then
		kallsymopt="${kallsymopt} --symbol-prefix=_"
	fi

	if [ -n "${CONFIG_KALLSYMS_ALL}" ]; then
		kallsymopt="${kallsymopt} --all-symbols"
	fi

	if [ -n "${CONFIG_KALLSYMS_ABSOLUTE_PERCPU}" ]; then
		kallsymopt="${kallsymopt} --absolute-percpu"
	fi

	if [ -n "${CONFIG_KALLSYMS_BASE_RELATIVE}" ]; then
		kallsymopt="${kallsymopt} --base-relative"
	fi

	local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL}               \
		      ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}"

	local afile="`basename ${2} .o`.S"

	${NM} -n ${1} | scripts/kallsyms ${kallsymopt} > ${afile}
	${CC} ${aflags} -c -o ${2} ${afile}
}

# Create map file with all symbols from ${1}
# See mksymap for additional details
mksysmap()
{
	${CONFIG_SHELL} "${srctree}/scripts/mksysmap" ${1} ${2}
}

sortextable()
{
	${objtree}/scripts/sortextable ${1}
}

# Delete output files in case of error
cleanup()
{
	rm -f .old_version
	rm -f .tmp_System.map
	rm -f .tmp_kallsyms*
	rm -f .tmp_version
	rm -f .tmp_symversions
	rm -f .tmp_vmlinux*
	rm -f built-in.o
	rm -f System.map
	rm -f vmlinux
	rm -f vmlinux.o
}

on_exit()
{
	if [ $? -ne 0 ]; then
		cleanup
	fi
}
trap on_exit EXIT

on_signals()
{
	exit 1
}
trap on_signals HUP INT QUIT TERM

#
#
# Use "make V=1" to debug this script
case "${KBUILD_VERBOSE}" in
*1*)
	set -x
	;;
esac

if [ "$1" = "clean" ]; then
	cleanup
	exit 0
fi

# We need access to CONFIG_ symbols
case "${KCONFIG_CONFIG}" in
*/*)
	. "${KCONFIG_CONFIG}"
	;;
*)
	# Force using a file from the current directory
	. "./${KCONFIG_CONFIG}"
esac

# Update version
info GEN .version
if [ ! -r .version ]; then
	rm -f .version;
	echo 1 >.version;
else
	mv .version .old_version;
	expr 0$(cat .old_version) + 1 >.version;
fi;

archive_builtin

#link vmlinux.o
modpost_link vmlinux.o

# modpost vmlinux.o to check for section mismatches
${MAKE} -f "${srctree}/scripts/Makefile.modpost" vmlinux.o

# final build of init/
${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init GCC_PLUGINS_CFLAGS="${GCC_PLUGINS_CFLAGS}"

if [ -n "${CONFIG_LTO_CLANG}" ]; then
	# Re-use vmlinux.o, so we can avoid the slow LTO link step in
	# vmlinux_link
	KBUILD_VMLINUX_INIT=
	KBUILD_VMLINUX_MAIN=vmlinux.o

	# Call recordmcount if needed
	recordmcount vmlinux.o
fi

kallsymso=""
kallsyms_vmlinux=""
if [ -n "${CONFIG_KALLSYMS}" ]; then

	# kallsyms support
	# Generate section listing all symbols and add it into vmlinux
	# It's a three step process:
	# 1)  Link .tmp_vmlinux1 so it has all symbols and sections,
	#     but __kallsyms is empty.
	#     Running kallsyms on that gives us .tmp_kallsyms1.o with
	#     the right size
	# 2)  Link .tmp_vmlinux2 so it now has a __kallsyms section of
	#     the right size, but due to the added section, some
	#     addresses have shifted.
	#     From here, we generate a correct .tmp_kallsyms2.o
	# 2a) We may use an extra pass as this has been necessary to
	#     woraround some alignment related bugs.
	#     KALLSYMS_EXTRA_PASS=1 is used to trigger this.
	# 3)  The correct ${kallsymso} is linked into the final vmlinux.
	#
	# a)  Verify that the System.map from vmlinux matches the map from
	#     ${kallsymso}.

	kallsymso=.tmp_kallsyms2.o
	kallsyms_vmlinux=.tmp_vmlinux2

	# step 1
	vmlinux_link "" .tmp_vmlinux1
	kallsyms .tmp_vmlinux1 .tmp_kallsyms1.o

	# step 2
	vmlinux_link .tmp_kallsyms1.o .tmp_vmlinux2
	kallsyms .tmp_vmlinux2 .tmp_kallsyms2.o

	# step 2a
	if [ -n "${KALLSYMS_EXTRA_PASS}" ]; then
		kallsymso=.tmp_kallsyms3.o
		kallsyms_vmlinux=.tmp_vmlinux3

		vmlinux_link .tmp_kallsyms2.o .tmp_vmlinux3

		kallsyms .tmp_vmlinux3 .tmp_kallsyms3.o
	fi
fi

info LD vmlinux
vmlinux_link "${kallsymso}" vmlinux

if [ -n "${CONFIG_BUILDTIME_EXTABLE_SORT}" ]; then
	info SORTEX vmlinux
	sortextable vmlinux
fi

info SYSMAP System.map
mksysmap vmlinux System.map

# step a (see comment above)
if [ -n "${CONFIG_KALLSYMS}" ]; then
	mksysmap ${kallsyms_vmlinux} .tmp_System.map

	if ! cmp -s System.map .tmp_System.map; then
		echo >&2 Inconsistent kallsyms data
		echo >&2 Try "make KALLSYMS_EXTRA_PASS=1" as a workaround
		exit 1
	fi
fi

# We made a new kernel - delete old version file
rm -f .old_version