blob: 9bb2cbd5c9f265e421ded04a69b72f37141a2663 [file] [log] [blame]
Alessandro Rubini6007b1b2013-06-18 23:47:56 +02001/*
2 * Copyright (C) 2012 CERN (www.cern.ch)
3 * Author: Alessandro Rubini <rubini@gnudd.com>
4 *
5 * Released according to the GNU GPL, version 2 or any later version.
6 *
7 * This work is part of the White Rabbit project, a research effort led
8 * by CERN, the European Institute for Nuclear Research.
9 */
10#include <linux/module.h>
11#include <linux/string.h>
12#include <linux/firmware.h>
13#include <linux/init.h>
14#include <linux/fmc.h>
15#include <asm/unaligned.h>
16
17/*
18 * This module uses the firmware loader to program the whole or part
19 * of the FMC eeprom. The meat is in the _run functions. However, no
20 * default file name is provided, to avoid accidental mishaps. Also,
21 * you must pass the busid argument
22 */
23static struct fmc_driver fwe_drv;
24
25FMC_PARAM_BUSID(fwe_drv);
26
27/* The "file=" is like the generic "gateware=" used elsewhere */
28static char *fwe_file[FMC_MAX_CARDS];
29static int fwe_file_n;
Joe Perches01412882014-02-25 15:01:41 -080030module_param_array_named(file, fwe_file, charp, &fwe_file_n, 0444);
Alessandro Rubini6007b1b2013-06-18 23:47:56 +020031
32static int fwe_run_tlv(struct fmc_device *fmc, const struct firmware *fw,
33 int write)
34{
35 const uint8_t *p = fw->data;
36 int len = fw->size;
37 uint16_t thislen, thisaddr;
38 int err;
39
40 /* format is: 'w' addr16 len16 data... */
41 while (len > 5) {
42 thisaddr = get_unaligned_le16(p+1);
43 thislen = get_unaligned_le16(p+3);
44 if (p[0] != 'w' || thislen + 5 > len) {
45 dev_err(&fmc->dev, "invalid tlv at offset %ti\n",
46 p - fw->data);
47 return -EINVAL;
48 }
49 err = 0;
50 if (write) {
51 dev_info(&fmc->dev, "write %i bytes at 0x%04x\n",
52 thislen, thisaddr);
53 err = fmc->op->write_ee(fmc, thisaddr, p + 5, thislen);
54 }
55 if (err < 0) {
56 dev_err(&fmc->dev, "write failure @0x%04x\n",
57 thisaddr);
58 return err;
59 }
60 p += 5 + thislen;
61 len -= 5 + thislen;
62 }
63 if (write)
64 dev_info(&fmc->dev, "write_eeprom: success\n");
65 return 0;
66}
67
68static int fwe_run_bin(struct fmc_device *fmc, const struct firmware *fw)
69{
70 int ret;
71
72 dev_info(&fmc->dev, "programming %zi bytes\n", fw->size);
73 ret = fmc->op->write_ee(fmc, 0, (void *)fw->data, fw->size);
74 if (ret < 0) {
75 dev_info(&fmc->dev, "write_eeprom: error %i\n", ret);
76 return ret;
77 }
78 dev_info(&fmc->dev, "write_eeprom: success\n");
79 return 0;
80}
81
82static int fwe_run(struct fmc_device *fmc, const struct firmware *fw, char *s)
83{
84 char *last4 = s + strlen(s) - 4;
85 int err;
86
87 if (!strcmp(last4, ".bin"))
88 return fwe_run_bin(fmc, fw);
89 if (!strcmp(last4, ".tlv")) {
90 err = fwe_run_tlv(fmc, fw, 0);
91 if (!err)
92 err = fwe_run_tlv(fmc, fw, 1);
93 return err;
94 }
95 dev_err(&fmc->dev, "invalid file name \"%s\"\n", s);
96 return -EINVAL;
97}
98
99/*
100 * Programming is done at probe time. Morever, only those listed with
101 * busid= are programmed.
102 * card is probed for, only one is programmed. Unfortunately, it's
103 * difficult to know in advance when probing the first card if others
104 * are there.
105 */
Jingoo Han3d04dd22013-08-12 12:35:46 +0900106static int fwe_probe(struct fmc_device *fmc)
Alessandro Rubini6007b1b2013-06-18 23:47:56 +0200107{
108 int err, index = 0;
109 const struct firmware *fw;
110 struct device *dev = &fmc->dev;
111 char *s;
112
113 if (!fwe_drv.busid_n) {
114 dev_err(dev, "%s: no busid passed, refusing all cards\n",
115 KBUILD_MODNAME);
116 return -ENODEV;
117 }
118 if (fmc->op->validate)
119 index = fmc->op->validate(fmc, &fwe_drv);
120 if (index < 0) {
121 pr_err("%s: refusing device \"%s\"\n", KBUILD_MODNAME,
122 dev_name(dev));
123 return -ENODEV;
124 }
125 if (index >= fwe_file_n) {
126 pr_err("%s: no filename for device index %i\n",
127 KBUILD_MODNAME, index);
128 return -ENODEV;
129 }
130 s = fwe_file[index];
131 if (!s) {
132 pr_err("%s: no filename for \"%s\" not programming\n",
133 KBUILD_MODNAME, dev_name(dev));
134 return -ENOENT;
135 }
136 err = request_firmware(&fw, s, dev);
137 if (err < 0) {
138 dev_err(&fmc->dev, "request firmware \"%s\": error %i\n",
139 s, err);
140 return err;
141 }
142 fwe_run(fmc, fw, s);
143 release_firmware(fw);
144 return 0;
145}
146
Jingoo Han3d04dd22013-08-12 12:35:46 +0900147static int fwe_remove(struct fmc_device *fmc)
Alessandro Rubini6007b1b2013-06-18 23:47:56 +0200148{
149 return 0;
150}
151
152static struct fmc_driver fwe_drv = {
153 .version = FMC_VERSION,
154 .driver.name = KBUILD_MODNAME,
155 .probe = fwe_probe,
156 .remove = fwe_remove,
157 /* no table, as the current match just matches everything */
158};
159
160static int fwe_init(void)
161{
162 int ret;
163
164 ret = fmc_driver_register(&fwe_drv);
165 return ret;
166}
167
168static void fwe_exit(void)
169{
170 fmc_driver_unregister(&fwe_drv);
171}
172
173module_init(fwe_init);
174module_exit(fwe_exit);
175
176MODULE_LICENSE("GPL");