blob: d0c82340f0e25198d0c56101c76d0d1a00b17254 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * ASCII values for a number of symbolic constants, printing functions,
3 * etc.
4 * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422)
5 * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002)
6 * by D. Gilbert and aeb (20020609)
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04007 * Update to SPC-4 T10/1713-D Rev 20, 22 May 2009, D. Gilbert 20090624
Linus Torvalds1da177e2005-04-16 15:20:36 -07008 */
9
Linus Torvalds1da177e2005-04-16 15:20:36 -070010#include <linux/blkdev.h>
11#include <linux/module.h>
12#include <linux/kernel.h>
13
14#include <scsi/scsi.h>
Christoph Hellwigbeb40482006-06-10 18:01:03 +020015#include <scsi/scsi_cmnd.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070016#include <scsi/scsi_device.h>
17#include <scsi/scsi_host.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070018#include <scsi/scsi_eh.h>
Adrian Bunkde540a52005-08-20 21:27:27 +020019#include <scsi/scsi_dbg.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070020
21
22
23/* Commands with service actions that change the command name */
24#define MAINTENANCE_IN 0xa3
25#define MAINTENANCE_OUT 0xa4
26#define SERVICE_ACTION_IN_12 0xab
27#define SERVICE_ACTION_OUT_12 0xa9
28#define SERVICE_ACTION_IN_16 0x9e
29#define SERVICE_ACTION_OUT_16 0x9f
Linus Torvalds1da177e2005-04-16 15:20:36 -070030
31
32
33#ifdef CONFIG_SCSI_CONSTANTS
34static const char * cdb_byte0_names[] = {
35/* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
36/* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
37 "Reasssign Blocks",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040038/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
Linus Torvalds1da177e2005-04-16 15:20:36 -070039/* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040040/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
41 "Reserve(6)",
42/* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)",
Linus Torvalds1da177e2005-04-16 15:20:36 -070043/* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic",
44/* 1e-1f */ "Prevent/Allow Medium Removal", NULL,
45/* 20-22 */ NULL, NULL, NULL,
46/* 23-28 */ "Read Format Capacities", "Set Window",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040047 "Read Capacity(10)", NULL, NULL, "Read(10)",
48/* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)",
49 "Read updated block",
50/* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal",
Linus Torvalds1da177e2005-04-16 15:20:36 -070051/* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040052/* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)",
Linus Torvalds1da177e2005-04-16 15:20:36 -070053 "Read Defect Data(10)",
54/* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer",
55 "Read Buffer",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040056/* 3d-3f */ "Update Block", "Read Long(10)", "Write Long(10)",
57/* 40-41 */ "Change Definition", "Write Same(10)",
Douglas Gilbertb4567ca2009-06-25 15:43:02 -040058/* 42-48 */ "Unmap/Read sub-channel", "Read TOC/PMA/ATIP",
59 "Read density support", "Play audio(10)", "Get configuration",
60 "Play audio msf", "Play audio track/index",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040061/* 49-4f */ "Play track relative(10)", "Get event status notification",
Linus Torvalds1da177e2005-04-16 15:20:36 -070062 "Pause/resume", "Log Select", "Log Sense", "Stop play/scan",
63 NULL,
64/* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040065 "Reserve track", "Send OPC info", "Mode Select(10)",
66/* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue",
67 "Mode Sense(10)", "Close track/session",
Linus Torvalds1da177e2005-04-16 15:20:36 -070068/* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in",
69 "Persistent reserve out",
70/* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
71/* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
72/* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
Douglas Gilbertb4567ca2009-06-25 15:43:02 -040073/* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, "Extended CDB",
74 "Variable length",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040075/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", "Extended copy",
Linus Torvalds1da177e2005-04-16 15:20:36 -070076 "Receive copy results",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040077/* 85-89 */ "ATA command pass through(16)", "Access control in",
78 "Access control out", "Read(16)", "Memory Export Out(16)",
Douglas Gilbertb4567ca2009-06-25 15:43:02 -040079/* 8a-8f */ "Write(16)", "ORWrite", "Read attributes", "Write attributes",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040080 "Write and verify(16)", "Verify(16)",
81/* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)",
82 "Lock/unlock cache(16)", "Write same(16)", NULL,
Linus Torvalds1da177e2005-04-16 15:20:36 -070083/* 95-99 */ NULL, NULL, NULL, NULL, NULL,
Douglas Gilberta507c6a2006-07-02 13:48:10 -040084/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in(16)",
85 "Service action out(16)",
86/* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank",
87 "Security protocol in", "Maintenance in", "Maintenance out",
88 "Move medium/play audio(12)",
Linus Torvalds1da177e2005-04-16 15:20:36 -070089/* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)",
90 "Play track relative(12)",
91/* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance",
92 "Read DVD structure", "Write and verify(12)",
93/* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)",
94/* b2-b4 */ "Search data low(12)", "Set limits(12)",
95 "Read element status attached",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040096/* b5-b6 */ "Security protocol out", "Send volume tag, set streaming",
Linus Torvalds1da177e2005-04-16 15:20:36 -070097/* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf",
98/* ba-bc */ "Redundancy group (in), Scan",
Douglas Gilberta507c6a2006-07-02 13:48:10 -040099 "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd",
100/* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd",
101 "Volume set (out), Send DVD structure",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700102};
103
104struct value_name_pair {
105 int value;
106 const char * name;
107};
108
109static const struct value_name_pair maint_in_arr[] = {
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400110 {0x5, "Report identifying information"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700111 {0xa, "Report target port groups"},
112 {0xb, "Report aliases"},
113 {0xc, "Report supported operation codes"},
114 {0xd, "Report supported task management functions"},
115 {0xe, "Report priority"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400116 {0xf, "Report timestamp"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400117 {0x10, "Management protocol in"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700118};
Tobias Klauser6391a112006-06-08 22:23:48 -0700119#define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700120
121static const struct value_name_pair maint_out_arr[] = {
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400122 {0x6, "Set identifying information"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700123 {0xa, "Set target port groups"},
124 {0xb, "Change aliases"},
125 {0xe, "Set priority"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400126 {0xf, "Set timestamp"},
127 {0x10, "Management protocol out"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700128};
Tobias Klauser6391a112006-06-08 22:23:48 -0700129#define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700130
131static const struct value_name_pair serv_in12_arr[] = {
132 {0x1, "Read media serial number"},
133};
Tobias Klauser6391a112006-06-08 22:23:48 -0700134#define SERV_IN12_SZ ARRAY_SIZE(serv_in12_arr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135
136static const struct value_name_pair serv_out12_arr[] = {
137 {-1, "dummy entry"},
138};
Tobias Klauser6391a112006-06-08 22:23:48 -0700139#define SERV_OUT12_SZ ARRAY_SIZE(serv_out12_arr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700140
141static const struct value_name_pair serv_in16_arr[] = {
142 {0x10, "Read capacity(16)"},
143 {0x11, "Read long(16)"},
Martin K. Petersenf57e4502009-10-15 14:43:23 -0400144 {0x12, "Get LBA status"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700145};
Tobias Klauser6391a112006-06-08 22:23:48 -0700146#define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700147
148static const struct value_name_pair serv_out16_arr[] = {
149 {0x11, "Write long(16)"},
150 {0x1f, "Notify data transfer device(16)"},
151};
Tobias Klauser6391a112006-06-08 22:23:48 -0700152#define SERV_OUT16_SZ ARRAY_SIZE(serv_out16_arr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700153
154static const struct value_name_pair variable_length_arr[] = {
155 {0x1, "Rebuild(32)"},
156 {0x2, "Regenerate(32)"},
157 {0x3, "Xdread(32)"},
158 {0x4, "Xdwrite(32)"},
159 {0x5, "Xdwrite extended(32)"},
160 {0x6, "Xpwrite(32)"},
161 {0x7, "Xdwriteread(32)"},
162 {0x8, "Xdwrite extended(64)"},
163 {0x9, "Read(32)"},
164 {0xa, "Verify(32)"},
165 {0xb, "Write(32)"},
166 {0xc, "Write an verify(32)"},
167 {0xd, "Write same(32)"},
168 {0x8801, "Format OSD"},
169 {0x8802, "Create (osd)"},
170 {0x8803, "List (osd)"},
171 {0x8805, "Read (osd)"},
172 {0x8806, "Write (osd)"},
173 {0x8807, "Append (osd)"},
174 {0x8808, "Flush (osd)"},
175 {0x880a, "Remove (osd)"},
176 {0x880b, "Create partition (osd)"},
177 {0x880c, "Remove partition (osd)"},
178 {0x880e, "Get attributes (osd)"},
179 {0x880f, "Set attributes (osd)"},
180 {0x8812, "Create and write (osd)"},
181 {0x8815, "Create collection (osd)"},
182 {0x8816, "Remove collection (osd)"},
183 {0x8817, "List collection (osd)"},
184 {0x8818, "Set key (osd)"},
185 {0x8819, "Set master key (osd)"},
186 {0x881a, "Flush collection (osd)"},
187 {0x881b, "Flush partition (osd)"},
188 {0x881c, "Flush OSD"},
189 {0x8f7e, "Perform SCSI command (osd)"},
190 {0x8f7f, "Perform task management function (osd)"},
191};
Tobias Klauser6391a112006-06-08 22:23:48 -0700192#define VARIABLE_LENGTH_SZ ARRAY_SIZE(variable_length_arr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700193
194static const char * get_sa_name(const struct value_name_pair * arr,
195 int arr_sz, int service_action)
196{
197 int k;
198
199 for (k = 0; k < arr_sz; ++k, ++arr) {
200 if (service_action == arr->value)
201 break;
202 }
203 return (k < arr_sz) ? arr->name : NULL;
204}
205
206/* attempt to guess cdb length if cdb_len==0 . No trailing linefeed. */
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500207static void print_opcode_name(unsigned char * cdbp, int cdb_len)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700208{
209 int sa, len, cdb0;
210 const char * name;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700211
212 cdb0 = cdbp[0];
213 switch(cdb0) {
214 case VARIABLE_LENGTH_CMD:
Boaz Harroshdb4742d2008-04-30 11:27:26 +0300215 len = scsi_varlen_cdb_length(cdbp);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700216 if (len < 10) {
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500217 printk("short variable length command, "
218 "len=%d ext_len=%d", len, cdb_len);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700219 break;
220 }
221 sa = (cdbp[8] << 8) + cdbp[9];
Martin K. Petersen8475f682010-01-20 02:17:40 -0500222 name = get_sa_name(variable_length_arr, VARIABLE_LENGTH_SZ, sa);
223 if (name)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500224 printk("%s", name);
Martin K. Petersen8475f682010-01-20 02:17:40 -0500225 else
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500226 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
Martin K. Petersen8475f682010-01-20 02:17:40 -0500227
228 if ((cdb_len > 0) && (len != cdb_len))
229 printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len);
230
Linus Torvalds1da177e2005-04-16 15:20:36 -0700231 break;
232 case MAINTENANCE_IN:
233 sa = cdbp[1] & 0x1f;
234 name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
235 if (name)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500236 printk("%s", name);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700237 else
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500238 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700239 break;
240 case MAINTENANCE_OUT:
241 sa = cdbp[1] & 0x1f;
242 name = get_sa_name(maint_out_arr, MAINT_OUT_SZ, sa);
243 if (name)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500244 printk("%s", name);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700245 else
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500246 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700247 break;
248 case SERVICE_ACTION_IN_12:
249 sa = cdbp[1] & 0x1f;
250 name = get_sa_name(serv_in12_arr, SERV_IN12_SZ, sa);
251 if (name)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500252 printk("%s", name);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700253 else
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500254 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700255 break;
256 case SERVICE_ACTION_OUT_12:
257 sa = cdbp[1] & 0x1f;
258 name = get_sa_name(serv_out12_arr, SERV_OUT12_SZ, sa);
259 if (name)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500260 printk("%s", name);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700261 else
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500262 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700263 break;
264 case SERVICE_ACTION_IN_16:
265 sa = cdbp[1] & 0x1f;
266 name = get_sa_name(serv_in16_arr, SERV_IN16_SZ, sa);
267 if (name)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500268 printk("%s", name);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700269 else
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500270 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700271 break;
272 case SERVICE_ACTION_OUT_16:
273 sa = cdbp[1] & 0x1f;
274 name = get_sa_name(serv_out16_arr, SERV_OUT16_SZ, sa);
275 if (name)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500276 printk("%s", name);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700277 else
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500278 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700279 break;
280 default:
281 if (cdb0 < 0xc0) {
282 name = cdb_byte0_names[cdb0];
283 if (name)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500284 printk("%s", name);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700285 else
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500286 printk("cdb[0]=0x%x (reserved)", cdb0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700287 } else
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500288 printk("cdb[0]=0x%x (vendor)", cdb0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700289 break;
290 }
291}
292
293#else /* ifndef CONFIG_SCSI_CONSTANTS */
294
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500295static void print_opcode_name(unsigned char * cdbp, int cdb_len)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700296{
297 int sa, len, cdb0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700298
299 cdb0 = cdbp[0];
300 switch(cdb0) {
301 case VARIABLE_LENGTH_CMD:
Boaz Harroshdb4742d2008-04-30 11:27:26 +0300302 len = scsi_varlen_cdb_length(cdbp);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700303 if (len < 10) {
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500304 printk("short opcode=0x%x command, len=%d "
305 "ext_len=%d", cdb0, len, cdb_len);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700306 break;
307 }
308 sa = (cdbp[8] << 8) + cdbp[9];
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500309 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700310 if (len != cdb_len)
311 printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len);
312 break;
313 case MAINTENANCE_IN:
314 case MAINTENANCE_OUT:
315 case SERVICE_ACTION_IN_12:
316 case SERVICE_ACTION_OUT_12:
317 case SERVICE_ACTION_IN_16:
318 case SERVICE_ACTION_OUT_16:
319 sa = cdbp[1] & 0x1f;
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500320 printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700321 break;
322 default:
323 if (cdb0 < 0xc0)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500324 printk("cdb[0]=0x%x", cdb0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700325 else
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500326 printk("cdb[0]=0x%x (vendor)", cdb0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700327 break;
328 }
329}
330#endif
331
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500332void __scsi_print_command(unsigned char *cdb)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700333{
334 int k, len;
335
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500336 print_opcode_name(cdb, 0);
Boaz Harroshdb4742d2008-04-30 11:27:26 +0300337 len = scsi_command_size(cdb);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700338 /* print out all bytes in cdb */
339 for (k = 0; k < len; ++k)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500340 printk(" %02x", cdb[k]);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700341 printk("\n");
342}
343EXPORT_SYMBOL(__scsi_print_command);
344
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500345void scsi_print_command(struct scsi_cmnd *cmd)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700346{
347 int k;
348
Martin K. Petersen77c9cfc2010-01-20 02:20:43 -0500349 if (cmd->cmnd == NULL)
350 return;
351
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500352 scmd_printk(KERN_INFO, cmd, "CDB: ");
353 print_opcode_name(cmd->cmnd, cmd->cmd_len);
354
Linus Torvalds1da177e2005-04-16 15:20:36 -0700355 /* print out all bytes in cdb */
356 printk(":");
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500357 for (k = 0; k < cmd->cmd_len; ++k)
358 printk(" %02x", cmd->cmnd[k]);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700359 printk("\n");
360}
Martin K. Petersen684b7fe2007-02-27 22:39:44 -0500361EXPORT_SYMBOL(scsi_print_command);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700362
363/**
db9dff32005-04-03 14:53:59 -0500364 * scsi_print_status - print scsi status description
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365 * @scsi_status: scsi status value
366 *
367 * If the status is recognized, the description is printed.
368 * Otherwise "Unknown status" is output. No trailing space.
369 * If CONFIG_SCSI_CONSTANTS is not set, then print status in hex
370 * (e.g. "0x2" for Check Condition).
371 **/
372void
373scsi_print_status(unsigned char scsi_status) {
374#ifdef CONFIG_SCSI_CONSTANTS
375 const char * ccp;
376
377 switch (scsi_status) {
378 case 0: ccp = "Good"; break;
379 case 0x2: ccp = "Check Condition"; break;
380 case 0x4: ccp = "Condition Met"; break;
381 case 0x8: ccp = "Busy"; break;
382 case 0x10: ccp = "Intermediate"; break;
383 case 0x14: ccp = "Intermediate-Condition Met"; break;
384 case 0x18: ccp = "Reservation Conflict"; break;
385 case 0x22: ccp = "Command Terminated"; break; /* obsolete */
386 case 0x28: ccp = "Task set Full"; break; /* was: Queue Full */
387 case 0x30: ccp = "ACA Active"; break;
388 case 0x40: ccp = "Task Aborted"; break;
389 default: ccp = "Unknown status";
390 }
391 printk(KERN_INFO "%s", ccp);
392#else
393 printk(KERN_INFO "0x%0x", scsi_status);
394#endif
395}
396EXPORT_SYMBOL(scsi_print_status);
397
398#ifdef CONFIG_SCSI_CONSTANTS
399
400struct error_info {
401 unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */
402 const char * text;
403};
404
Martin K. Petersen62d42a62007-02-28 12:37:06 -0500405/*
406 * The canonical list of T10 Additional Sense Codes is available at:
407 * http://www.t10.org/lists/asc-num.txt
408 */
409static const struct error_info additional[] =
Linus Torvalds1da177e2005-04-16 15:20:36 -0700410{
411 {0x0000, "No additional sense information"},
412 {0x0001, "Filemark detected"},
413 {0x0002, "End-of-partition/medium detected"},
414 {0x0003, "Setmark detected"},
415 {0x0004, "Beginning-of-partition/medium detected"},
416 {0x0005, "End-of-data detected"},
417 {0x0006, "I/O process terminated"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400418 {0x0007, "Programmable early warning detected"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700419 {0x0011, "Audio play operation in progress"},
420 {0x0012, "Audio play operation paused"},
421 {0x0013, "Audio play operation successfully completed"},
422 {0x0014, "Audio play operation stopped due to error"},
423 {0x0015, "No current audio status to return"},
424 {0x0016, "Operation in progress"},
425 {0x0017, "Cleaning requested"},
426 {0x0018, "Erase operation in progress"},
427 {0x0019, "Locate operation in progress"},
428 {0x001A, "Rewind operation in progress"},
429 {0x001B, "Set capacity operation in progress"},
430 {0x001C, "Verify operation in progress"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400431 {0x001D, "ATA pass through information available"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400432 {0x001E, "Conflicting SA creation request"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700433
434 {0x0100, "No index/sector signal"},
435
436 {0x0200, "No seek complete"},
437
438 {0x0300, "Peripheral device write fault"},
439 {0x0301, "No write current"},
440 {0x0302, "Excessive write errors"},
441
442 {0x0400, "Logical unit not ready, cause not reportable"},
443 {0x0401, "Logical unit is in process of becoming ready"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400444 {0x0402, "Logical unit not ready, initializing command required"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700445 {0x0403, "Logical unit not ready, manual intervention required"},
446 {0x0404, "Logical unit not ready, format in progress"},
447 {0x0405, "Logical unit not ready, rebuild in progress"},
448 {0x0406, "Logical unit not ready, recalculation in progress"},
449 {0x0407, "Logical unit not ready, operation in progress"},
450 {0x0408, "Logical unit not ready, long write in progress"},
451 {0x0409, "Logical unit not ready, self-test in progress"},
452 {0x040A, "Logical unit not accessible, asymmetric access state "
453 "transition"},
454 {0x040B, "Logical unit not accessible, target port in standby state"},
455 {0x040C, "Logical unit not accessible, target port in unavailable "
456 "state"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400457 {0x040D, "Logical unit not ready, structure check required"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700458 {0x0410, "Logical unit not ready, auxiliary memory not accessible"},
459 {0x0411, "Logical unit not ready, notify (enable spinup) required"},
460 {0x0412, "Logical unit not ready, offline"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400461 {0x0413, "Logical unit not ready, SA creation in progress"},
462 {0x0414, "Logical unit not ready, space allocation in progress"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700463
464 {0x0500, "Logical unit does not respond to selection"},
465
466 {0x0600, "No reference position found"},
467
468 {0x0700, "Multiple peripheral devices selected"},
469
470 {0x0800, "Logical unit communication failure"},
471 {0x0801, "Logical unit communication time-out"},
472 {0x0802, "Logical unit communication parity error"},
473 {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"},
474 {0x0804, "Unreachable copy target"},
475
476 {0x0900, "Track following error"},
477 {0x0901, "Tracking servo failure"},
478 {0x0902, "Focus servo failure"},
479 {0x0903, "Spindle servo failure"},
480 {0x0904, "Head select fault"},
481
482 {0x0A00, "Error log overflow"},
483
484 {0x0B00, "Warning"},
485 {0x0B01, "Warning - specified temperature exceeded"},
486 {0x0B02, "Warning - enclosure degraded"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400487 {0x0B03, "Warning - background self-test failed"},
488 {0x0B04, "Warning - background pre-scan detected medium error"},
489 {0x0B05, "Warning - background medium scan detected medium error"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400490 {0x0B06, "Warning - non-volatile cache now volatile"},
491 {0x0B07, "Warning - degraded power to non-volatile cache"},
492 {0x0B08, "Warning - power loss expected"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700493
494 {0x0C00, "Write error"},
495 {0x0C01, "Write error - recovered with auto reallocation"},
496 {0x0C02, "Write error - auto reallocation failed"},
497 {0x0C03, "Write error - recommend reassignment"},
498 {0x0C04, "Compression check miscompare error"},
499 {0x0C05, "Data expansion occurred during compression"},
500 {0x0C06, "Block not compressible"},
501 {0x0C07, "Write error - recovery needed"},
502 {0x0C08, "Write error - recovery failed"},
503 {0x0C09, "Write error - loss of streaming"},
504 {0x0C0A, "Write error - padding blocks added"},
505 {0x0C0B, "Auxiliary memory write error"},
506 {0x0C0C, "Write error - unexpected unsolicited data"},
507 {0x0C0D, "Write error - not enough unsolicited data"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400508 {0x0C0F, "Defects in error window"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700509
510 {0x0D00, "Error detected by third party temporary initiator"},
511 {0x0D01, "Third party device failure"},
512 {0x0D02, "Copy target device not reachable"},
513 {0x0D03, "Incorrect copy target device type"},
514 {0x0D04, "Copy target device data underrun"},
515 {0x0D05, "Copy target device data overrun"},
516
517 {0x0E00, "Invalid information unit"},
518 {0x0E01, "Information unit too short"},
519 {0x0E02, "Information unit too long"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400520 {0x0E03, "Invalid field in command information unit"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700521
522 {0x1000, "Id CRC or ECC error"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400523 {0x1001, "Logical block guard check failed"},
524 {0x1002, "Logical block application tag check failed"},
525 {0x1003, "Logical block reference tag check failed"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700526
527 {0x1100, "Unrecovered read error"},
528 {0x1101, "Read retries exhausted"},
529 {0x1102, "Error too long to correct"},
530 {0x1103, "Multiple read errors"},
531 {0x1104, "Unrecovered read error - auto reallocate failed"},
532 {0x1105, "L-EC uncorrectable error"},
533 {0x1106, "CIRC unrecovered error"},
534 {0x1107, "Data re-synchronization error"},
535 {0x1108, "Incomplete block read"},
536 {0x1109, "No gap found"},
537 {0x110A, "Miscorrected error"},
538 {0x110B, "Unrecovered read error - recommend reassignment"},
539 {0x110C, "Unrecovered read error - recommend rewrite the data"},
540 {0x110D, "De-compression CRC error"},
541 {0x110E, "Cannot decompress using declared algorithm"},
542 {0x110F, "Error reading UPC/EAN number"},
543 {0x1110, "Error reading ISRC number"},
544 {0x1111, "Read error - loss of streaming"},
545 {0x1112, "Auxiliary memory read error"},
546 {0x1113, "Read error - failed retransmission request"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400547 {0x1114, "Read error - lba marked bad by application client"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700548
549 {0x1200, "Address mark not found for id field"},
550
551 {0x1300, "Address mark not found for data field"},
552
553 {0x1400, "Recorded entity not found"},
554 {0x1401, "Record not found"},
555 {0x1402, "Filemark or setmark not found"},
556 {0x1403, "End-of-data not found"},
557 {0x1404, "Block sequence error"},
558 {0x1405, "Record not found - recommend reassignment"},
559 {0x1406, "Record not found - data auto-reallocated"},
560 {0x1407, "Locate operation failure"},
561
562 {0x1500, "Random positioning error"},
563 {0x1501, "Mechanical positioning error"},
564 {0x1502, "Positioning error detected by read of medium"},
565
566 {0x1600, "Data synchronization mark error"},
567 {0x1601, "Data sync error - data rewritten"},
568 {0x1602, "Data sync error - recommend rewrite"},
569 {0x1603, "Data sync error - data auto-reallocated"},
570 {0x1604, "Data sync error - recommend reassignment"},
571
572 {0x1700, "Recovered data with no error correction applied"},
573 {0x1701, "Recovered data with retries"},
574 {0x1702, "Recovered data with positive head offset"},
575 {0x1703, "Recovered data with negative head offset"},
576 {0x1704, "Recovered data with retries and/or circ applied"},
577 {0x1705, "Recovered data using previous sector id"},
578 {0x1706, "Recovered data without ECC - data auto-reallocated"},
579 {0x1707, "Recovered data without ECC - recommend reassignment"},
580 {0x1708, "Recovered data without ECC - recommend rewrite"},
581 {0x1709, "Recovered data without ECC - data rewritten"},
582
583 {0x1800, "Recovered data with error correction applied"},
584 {0x1801, "Recovered data with error corr. & retries applied"},
585 {0x1802, "Recovered data - data auto-reallocated"},
586 {0x1803, "Recovered data with CIRC"},
587 {0x1804, "Recovered data with L-EC"},
588 {0x1805, "Recovered data - recommend reassignment"},
589 {0x1806, "Recovered data - recommend rewrite"},
590 {0x1807, "Recovered data with ECC - data rewritten"},
591 {0x1808, "Recovered data with linking"},
592
593 {0x1900, "Defect list error"},
594 {0x1901, "Defect list not available"},
595 {0x1902, "Defect list error in primary list"},
596 {0x1903, "Defect list error in grown list"},
597
598 {0x1A00, "Parameter list length error"},
599
600 {0x1B00, "Synchronous data transfer error"},
601
602 {0x1C00, "Defect list not found"},
603 {0x1C01, "Primary defect list not found"},
604 {0x1C02, "Grown defect list not found"},
605
606 {0x1D00, "Miscompare during verify operation"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400607 {0x1D01, "Miscompare verify of unmapped LBA"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700608
609 {0x1E00, "Recovered id with ECC correction"},
610
611 {0x1F00, "Partial defect list transfer"},
612
613 {0x2000, "Invalid command operation code"},
614 {0x2001, "Access denied - initiator pending-enrolled"},
615 {0x2002, "Access denied - no access rights"},
616 {0x2003, "Access denied - invalid mgmt id key"},
617 {0x2004, "Illegal command while in write capable state"},
618 {0x2005, "Obsolete"},
619 {0x2006, "Illegal command while in explicit address mode"},
620 {0x2007, "Illegal command while in implicit address mode"},
621 {0x2008, "Access denied - enrollment conflict"},
622 {0x2009, "Access denied - invalid LU identifier"},
623 {0x200A, "Access denied - invalid proxy token"},
624 {0x200B, "Access denied - ACL LUN conflict"},
625
626 {0x2100, "Logical block address out of range"},
627 {0x2101, "Invalid element address"},
628 {0x2102, "Invalid address for write"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400629 {0x2103, "Invalid write crossing layer jump"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700630
631 {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
632
633 {0x2400, "Invalid field in cdb"},
634 {0x2401, "CDB decryption error"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400635 {0x2402, "Obsolete"},
636 {0x2403, "Obsolete"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700637 {0x2404, "Security audit value frozen"},
638 {0x2405, "Security working key frozen"},
639 {0x2406, "Nonce not unique"},
640 {0x2407, "Nonce timestamp out of range"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400641 {0x2408, "Invalid XCDB"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700642
643 {0x2500, "Logical unit not supported"},
644
645 {0x2600, "Invalid field in parameter list"},
646 {0x2601, "Parameter not supported"},
647 {0x2602, "Parameter value invalid"},
648 {0x2603, "Threshold parameters not supported"},
649 {0x2604, "Invalid release of persistent reservation"},
650 {0x2605, "Data decryption error"},
651 {0x2606, "Too many target descriptors"},
652 {0x2607, "Unsupported target descriptor type code"},
653 {0x2608, "Too many segment descriptors"},
654 {0x2609, "Unsupported segment descriptor type code"},
655 {0x260A, "Unexpected inexact segment"},
656 {0x260B, "Inline data length exceeded"},
657 {0x260C, "Invalid operation for copy source or destination"},
658 {0x260D, "Copy segment granularity violation"},
659 {0x260E, "Invalid parameter while port is enabled"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400660 {0x260F, "Invalid data-out buffer integrity check value"},
661 {0x2610, "Data decryption key fail limit reached"},
662 {0x2611, "Incomplete key-associated data set"},
663 {0x2612, "Vendor specific key reference not found"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700664
665 {0x2700, "Write protected"},
666 {0x2701, "Hardware write protected"},
667 {0x2702, "Logical unit software write protected"},
668 {0x2703, "Associated write protect"},
669 {0x2704, "Persistent write protect"},
670 {0x2705, "Permanent write protect"},
671 {0x2706, "Conditional write protect"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400672 {0x2707, "Space allocation failed write protect"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700673
674 {0x2800, "Not ready to ready change, medium may have changed"},
675 {0x2801, "Import or export element accessed"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400676 {0x2802, "Format-layer may have changed"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400677 {0x2803, "Import/export element accessed, medium changed"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700678
679 {0x2900, "Power on, reset, or bus device reset occurred"},
680 {0x2901, "Power on occurred"},
681 {0x2902, "Scsi bus reset occurred"},
682 {0x2903, "Bus device reset function occurred"},
683 {0x2904, "Device internal reset"},
684 {0x2905, "Transceiver mode changed to single-ended"},
685 {0x2906, "Transceiver mode changed to lvd"},
686 {0x2907, "I_T nexus loss occurred"},
687
688 {0x2A00, "Parameters changed"},
689 {0x2A01, "Mode parameters changed"},
690 {0x2A02, "Log parameters changed"},
691 {0x2A03, "Reservations preempted"},
692 {0x2A04, "Reservations released"},
693 {0x2A05, "Registrations preempted"},
694 {0x2A06, "Asymmetric access state changed"},
695 {0x2A07, "Implicit asymmetric access state transition failed"},
696 {0x2A08, "Priority changed"},
697 {0x2A09, "Capacity data has changed"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400698 {0x2A0A, "Error history I_T nexus cleared"},
699 {0x2A0B, "Error history snapshot released"},
700 {0x2A0C, "Error recovery attributes have changed"},
701 {0x2A0D, "Data encryption capabilities changed"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400702 {0x2A10, "Timestamp changed"},
703 {0x2A11, "Data encryption parameters changed by another i_t nexus"},
704 {0x2A12, "Data encryption parameters changed by vendor specific "
705 "event"},
706 {0x2A13, "Data encryption key instance counter has changed"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400707 {0x2A14, "SA creation capabilities data has changed"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700708
709 {0x2B00, "Copy cannot execute since host cannot disconnect"},
710
711 {0x2C00, "Command sequence error"},
712 {0x2C01, "Too many windows specified"},
713 {0x2C02, "Invalid combination of windows specified"},
714 {0x2C03, "Current program area is not empty"},
715 {0x2C04, "Current program area is empty"},
716 {0x2C05, "Illegal power condition request"},
717 {0x2C06, "Persistent prevent conflict"},
718 {0x2C07, "Previous busy status"},
719 {0x2C08, "Previous task set full status"},
720 {0x2C09, "Previous reservation conflict status"},
721 {0x2C0A, "Partition or collection contains user objects"},
722 {0x2C0B, "Not reserved"},
723
724 {0x2D00, "Overwrite error on update in place"},
725
726 {0x2E00, "Insufficient time for operation"},
727
728 {0x2F00, "Commands cleared by another initiator"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400729 {0x2F01, "Commands cleared by power loss notification"},
Martin K. Petersen62d42a62007-02-28 12:37:06 -0500730 {0x2F02, "Commands cleared by device server"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700731
732 {0x3000, "Incompatible medium installed"},
733 {0x3001, "Cannot read medium - unknown format"},
734 {0x3002, "Cannot read medium - incompatible format"},
735 {0x3003, "Cleaning cartridge installed"},
736 {0x3004, "Cannot write medium - unknown format"},
737 {0x3005, "Cannot write medium - incompatible format"},
738 {0x3006, "Cannot format medium - incompatible medium"},
739 {0x3007, "Cleaning failure"},
740 {0x3008, "Cannot write - application code mismatch"},
741 {0x3009, "Current session not fixated for append"},
742 {0x300A, "Cleaning request rejected"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400743 {0x300C, "WORM medium - overwrite attempted"},
744 {0x300D, "WORM medium - integrity check"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700745 {0x3010, "Medium not formatted"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400746 {0x3011, "Incompatible volume type"},
747 {0x3012, "Incompatible volume qualifier"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700748
749 {0x3100, "Medium format corrupted"},
750 {0x3101, "Format command failed"},
751 {0x3102, "Zoned formatting failed due to spare linking"},
752
753 {0x3200, "No defect spare location available"},
754 {0x3201, "Defect list update failure"},
755
756 {0x3300, "Tape length error"},
757
758 {0x3400, "Enclosure failure"},
759
760 {0x3500, "Enclosure services failure"},
761 {0x3501, "Unsupported enclosure function"},
762 {0x3502, "Enclosure services unavailable"},
763 {0x3503, "Enclosure services transfer failure"},
764 {0x3504, "Enclosure services transfer refused"},
765 {0x3505, "Enclosure services checksum error"},
766
767 {0x3600, "Ribbon, ink, or toner failure"},
768
769 {0x3700, "Rounded parameter"},
770
771 {0x3800, "Event status notification"},
772 {0x3802, "Esn - power management class event"},
773 {0x3804, "Esn - media class event"},
774 {0x3806, "Esn - device busy class event"},
775
776 {0x3900, "Saving parameters not supported"},
777
778 {0x3A00, "Medium not present"},
779 {0x3A01, "Medium not present - tray closed"},
780 {0x3A02, "Medium not present - tray open"},
781 {0x3A03, "Medium not present - loadable"},
782 {0x3A04, "Medium not present - medium auxiliary memory accessible"},
783
784 {0x3B00, "Sequential positioning error"},
785 {0x3B01, "Tape position error at beginning-of-medium"},
786 {0x3B02, "Tape position error at end-of-medium"},
787 {0x3B03, "Tape or electronic vertical forms unit not ready"},
788 {0x3B04, "Slew failure"},
789 {0x3B05, "Paper jam"},
790 {0x3B06, "Failed to sense top-of-form"},
791 {0x3B07, "Failed to sense bottom-of-form"},
792 {0x3B08, "Reposition error"},
793 {0x3B09, "Read past end of medium"},
794 {0x3B0A, "Read past beginning of medium"},
795 {0x3B0B, "Position past end of medium"},
796 {0x3B0C, "Position past beginning of medium"},
797 {0x3B0D, "Medium destination element full"},
798 {0x3B0E, "Medium source element empty"},
799 {0x3B0F, "End of medium reached"},
800 {0x3B11, "Medium magazine not accessible"},
801 {0x3B12, "Medium magazine removed"},
802 {0x3B13, "Medium magazine inserted"},
803 {0x3B14, "Medium magazine locked"},
804 {0x3B15, "Medium magazine unlocked"},
805 {0x3B16, "Mechanical positioning or changer error"},
806 {0x3B17, "Read past end of user object"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400807 {0x3B18, "Element disabled"},
808 {0x3B19, "Element enabled"},
809 {0x3B1A, "Data transfer device removed"},
810 {0x3B1B, "Data transfer device inserted"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700811
812 {0x3D00, "Invalid bits in identify message"},
813
814 {0x3E00, "Logical unit has not self-configured yet"},
815 {0x3E01, "Logical unit failure"},
816 {0x3E02, "Timeout on logical unit"},
817 {0x3E03, "Logical unit failed self-test"},
818 {0x3E04, "Logical unit unable to update self-test log"},
819
820 {0x3F00, "Target operating conditions have changed"},
821 {0x3F01, "Microcode has been changed"},
822 {0x3F02, "Changed operating definition"},
823 {0x3F03, "Inquiry data has changed"},
824 {0x3F04, "Component device attached"},
825 {0x3F05, "Device identifier changed"},
826 {0x3F06, "Redundancy group created or modified"},
827 {0x3F07, "Redundancy group deleted"},
828 {0x3F08, "Spare created or modified"},
829 {0x3F09, "Spare deleted"},
830 {0x3F0A, "Volume set created or modified"},
831 {0x3F0B, "Volume set deleted"},
832 {0x3F0C, "Volume set deassigned"},
833 {0x3F0D, "Volume set reassigned"},
834 {0x3F0E, "Reported luns data has changed"},
835 {0x3F0F, "Echo buffer overwritten"},
836 {0x3F10, "Medium loadable"},
837 {0x3F11, "Medium auxiliary memory accessible"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400838 {0x3F12, "iSCSI IP address added"},
839 {0x3F13, "iSCSI IP address removed"},
840 {0x3F14, "iSCSI IP address changed"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700841/*
842 * {0x40NN, "Ram failure"},
843 * {0x40NN, "Diagnostic failure on component nn"},
844 * {0x41NN, "Data path failure"},
845 * {0x42NN, "Power-on or self-test failure"},
846 */
847 {0x4300, "Message error"},
848
849 {0x4400, "Internal target failure"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400850 {0x4471, "ATA device failed set features"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700851
852 {0x4500, "Select or reselect failure"},
853
854 {0x4600, "Unsuccessful soft reset"},
855
856 {0x4700, "Scsi parity error"},
857 {0x4701, "Data phase CRC error detected"},
858 {0x4702, "Scsi parity error detected during st data phase"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400859 {0x4703, "Information unit iuCRC error detected"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700860 {0x4704, "Asynchronous information protection error detected"},
861 {0x4705, "Protocol service CRC error"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400862 {0x4706, "Phy test function in progress"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700863 {0x477f, "Some commands cleared by iSCSI Protocol event"},
864
865 {0x4800, "Initiator detected error message received"},
866
867 {0x4900, "Invalid message error"},
868
869 {0x4A00, "Command phase error"},
870
871 {0x4B00, "Data phase error"},
872 {0x4B01, "Invalid target port transfer tag received"},
873 {0x4B02, "Too much write data"},
874 {0x4B03, "Ack/nak timeout"},
875 {0x4B04, "Nak received"},
876 {0x4B05, "Data offset error"},
877 {0x4B06, "Initiator response timeout"},
878
879 {0x4C00, "Logical unit failed self-configuration"},
880/*
881 * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"},
882 */
883 {0x4E00, "Overlapped commands attempted"},
884
885 {0x5000, "Write append error"},
886 {0x5001, "Write append position error"},
887 {0x5002, "Position error related to timing"},
888
889 {0x5100, "Erase failure"},
890 {0x5101, "Erase failure - incomplete erase operation detected"},
891
892 {0x5200, "Cartridge fault"},
893
894 {0x5300, "Media load or eject failed"},
895 {0x5301, "Unload tape failure"},
896 {0x5302, "Medium removal prevented"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400897 {0x5303, "Medium removal prevented by data transfer element"},
898 {0x5304, "Medium thread or unthread failure"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700899
900 {0x5400, "Scsi to host system interface failure"},
901
902 {0x5500, "System resource failure"},
903 {0x5501, "System buffer full"},
904 {0x5502, "Insufficient reservation resources"},
905 {0x5503, "Insufficient resources"},
906 {0x5504, "Insufficient registration resources"},
907 {0x5505, "Insufficient access control resources"},
908 {0x5506, "Auxiliary memory out of space"},
909 {0x5507, "Quota error"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -0400910 {0x5508, "Maximum number of supplemental decryption keys exceeded"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -0400911 {0x5509, "Medium auxiliary memory not accessible"},
912 {0x550A, "Data currently unavailable"},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700913
914 {0x5700, "Unable to recover table-of-contents"},
915
916 {0x5800, "Generation does not exist"},
917
918 {0x5900, "Updated block read"},
919
920 {0x5A00, "Operator request or state change input"},
921 {0x5A01, "Operator medium removal request"},
922 {0x5A02, "Operator selected write protect"},
923 {0x5A03, "Operator selected write permit"},
924
925 {0x5B00, "Log exception"},
926 {0x5B01, "Threshold condition met"},
927 {0x5B02, "Log counter at maximum"},
928 {0x5B03, "Log list codes exhausted"},
929
930 {0x5C00, "Rpl status change"},
931 {0x5C01, "Spindles synchronized"},
932 {0x5C02, "Spindles not synchronized"},
933
934 {0x5D00, "Failure prediction threshold exceeded"},
935 {0x5D01, "Media failure prediction threshold exceeded"},
936 {0x5D02, "Logical unit failure prediction threshold exceeded"},
937 {0x5D03, "Spare area exhaustion prediction threshold exceeded"},
938 {0x5D10, "Hardware impending failure general hard drive failure"},
939 {0x5D11, "Hardware impending failure drive error rate too high"},
940 {0x5D12, "Hardware impending failure data error rate too high"},
941 {0x5D13, "Hardware impending failure seek error rate too high"},
942 {0x5D14, "Hardware impending failure too many block reassigns"},
943 {0x5D15, "Hardware impending failure access times too high"},
944 {0x5D16, "Hardware impending failure start unit times too high"},
945 {0x5D17, "Hardware impending failure channel parametrics"},
946 {0x5D18, "Hardware impending failure controller detected"},
947 {0x5D19, "Hardware impending failure throughput performance"},
948 {0x5D1A, "Hardware impending failure seek time performance"},
949 {0x5D1B, "Hardware impending failure spin-up retry count"},
950 {0x5D1C, "Hardware impending failure drive calibration retry count"},
951 {0x5D20, "Controller impending failure general hard drive failure"},
952 {0x5D21, "Controller impending failure drive error rate too high"},
953 {0x5D22, "Controller impending failure data error rate too high"},
954 {0x5D23, "Controller impending failure seek error rate too high"},
955 {0x5D24, "Controller impending failure too many block reassigns"},
956 {0x5D25, "Controller impending failure access times too high"},
957 {0x5D26, "Controller impending failure start unit times too high"},
958 {0x5D27, "Controller impending failure channel parametrics"},
959 {0x5D28, "Controller impending failure controller detected"},
960 {0x5D29, "Controller impending failure throughput performance"},
961 {0x5D2A, "Controller impending failure seek time performance"},
962 {0x5D2B, "Controller impending failure spin-up retry count"},
963 {0x5D2C, "Controller impending failure drive calibration retry count"},
964 {0x5D30, "Data channel impending failure general hard drive failure"},
965 {0x5D31, "Data channel impending failure drive error rate too high"},
966 {0x5D32, "Data channel impending failure data error rate too high"},
967 {0x5D33, "Data channel impending failure seek error rate too high"},
968 {0x5D34, "Data channel impending failure too many block reassigns"},
969 {0x5D35, "Data channel impending failure access times too high"},
970 {0x5D36, "Data channel impending failure start unit times too high"},
971 {0x5D37, "Data channel impending failure channel parametrics"},
972 {0x5D38, "Data channel impending failure controller detected"},
973 {0x5D39, "Data channel impending failure throughput performance"},
974 {0x5D3A, "Data channel impending failure seek time performance"},
975 {0x5D3B, "Data channel impending failure spin-up retry count"},
976 {0x5D3C, "Data channel impending failure drive calibration retry "
977 "count"},
978 {0x5D40, "Servo impending failure general hard drive failure"},
979 {0x5D41, "Servo impending failure drive error rate too high"},
980 {0x5D42, "Servo impending failure data error rate too high"},
981 {0x5D43, "Servo impending failure seek error rate too high"},
982 {0x5D44, "Servo impending failure too many block reassigns"},
983 {0x5D45, "Servo impending failure access times too high"},
984 {0x5D46, "Servo impending failure start unit times too high"},
985 {0x5D47, "Servo impending failure channel parametrics"},
986 {0x5D48, "Servo impending failure controller detected"},
987 {0x5D49, "Servo impending failure throughput performance"},
988 {0x5D4A, "Servo impending failure seek time performance"},
989 {0x5D4B, "Servo impending failure spin-up retry count"},
990 {0x5D4C, "Servo impending failure drive calibration retry count"},
991 {0x5D50, "Spindle impending failure general hard drive failure"},
992 {0x5D51, "Spindle impending failure drive error rate too high"},
993 {0x5D52, "Spindle impending failure data error rate too high"},
994 {0x5D53, "Spindle impending failure seek error rate too high"},
995 {0x5D54, "Spindle impending failure too many block reassigns"},
996 {0x5D55, "Spindle impending failure access times too high"},
997 {0x5D56, "Spindle impending failure start unit times too high"},
998 {0x5D57, "Spindle impending failure channel parametrics"},
999 {0x5D58, "Spindle impending failure controller detected"},
1000 {0x5D59, "Spindle impending failure throughput performance"},
1001 {0x5D5A, "Spindle impending failure seek time performance"},
1002 {0x5D5B, "Spindle impending failure spin-up retry count"},
1003 {0x5D5C, "Spindle impending failure drive calibration retry count"},
1004 {0x5D60, "Firmware impending failure general hard drive failure"},
1005 {0x5D61, "Firmware impending failure drive error rate too high"},
1006 {0x5D62, "Firmware impending failure data error rate too high"},
1007 {0x5D63, "Firmware impending failure seek error rate too high"},
1008 {0x5D64, "Firmware impending failure too many block reassigns"},
1009 {0x5D65, "Firmware impending failure access times too high"},
1010 {0x5D66, "Firmware impending failure start unit times too high"},
1011 {0x5D67, "Firmware impending failure channel parametrics"},
1012 {0x5D68, "Firmware impending failure controller detected"},
1013 {0x5D69, "Firmware impending failure throughput performance"},
1014 {0x5D6A, "Firmware impending failure seek time performance"},
1015 {0x5D6B, "Firmware impending failure spin-up retry count"},
1016 {0x5D6C, "Firmware impending failure drive calibration retry count"},
1017 {0x5DFF, "Failure prediction threshold exceeded (false)"},
1018
1019 {0x5E00, "Low power condition on"},
1020 {0x5E01, "Idle condition activated by timer"},
1021 {0x5E02, "Standby condition activated by timer"},
1022 {0x5E03, "Idle condition activated by command"},
1023 {0x5E04, "Standby condition activated by command"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001024 {0x5E05, "Idle_b condition activated by timer"},
1025 {0x5E06, "Idle_b condition activated by command"},
1026 {0x5E07, "Idle_c condition activated by timer"},
1027 {0x5E08, "Idle_c condition activated by command"},
1028 {0x5E09, "Standby_y condition activated by timer"},
1029 {0x5E0A, "Standby_y condition activated by command"},
Linus Torvalds1da177e2005-04-16 15:20:36 -07001030 {0x5E41, "Power state change to active"},
1031 {0x5E42, "Power state change to idle"},
1032 {0x5E43, "Power state change to standby"},
1033 {0x5E45, "Power state change to sleep"},
1034 {0x5E47, "Power state change to device control"},
1035
1036 {0x6000, "Lamp failure"},
1037
1038 {0x6100, "Video acquisition error"},
1039 {0x6101, "Unable to acquire video"},
1040 {0x6102, "Out of focus"},
1041
1042 {0x6200, "Scan head positioning error"},
1043
1044 {0x6300, "End of user area encountered on this track"},
1045 {0x6301, "Packet does not fit in available space"},
1046
1047 {0x6400, "Illegal mode for this track"},
1048 {0x6401, "Invalid packet size"},
1049
1050 {0x6500, "Voltage fault"},
1051
1052 {0x6600, "Automatic document feeder cover up"},
1053 {0x6601, "Automatic document feeder lift up"},
1054 {0x6602, "Document jam in automatic document feeder"},
1055 {0x6603, "Document miss feed automatic in document feeder"},
1056
1057 {0x6700, "Configuration failure"},
1058 {0x6701, "Configuration of incapable logical units failed"},
1059 {0x6702, "Add logical unit failed"},
1060 {0x6703, "Modification of logical unit failed"},
1061 {0x6704, "Exchange of logical unit failed"},
1062 {0x6705, "Remove of logical unit failed"},
1063 {0x6706, "Attachment of logical unit failed"},
1064 {0x6707, "Creation of logical unit failed"},
1065 {0x6708, "Assign failure occurred"},
1066 {0x6709, "Multiply assigned logical unit"},
1067 {0x670A, "Set target port groups command failed"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -04001068 {0x670B, "ATA device feature not enabled"},
Linus Torvalds1da177e2005-04-16 15:20:36 -07001069
1070 {0x6800, "Logical unit not configured"},
1071
1072 {0x6900, "Data loss on logical unit"},
1073 {0x6901, "Multiple logical unit failures"},
1074 {0x6902, "Parity/data mismatch"},
1075
1076 {0x6A00, "Informational, refer to log"},
1077
1078 {0x6B00, "State change has occurred"},
1079 {0x6B01, "Redundancy level got better"},
1080 {0x6B02, "Redundancy level got worse"},
1081
1082 {0x6C00, "Rebuild failure occurred"},
1083
1084 {0x6D00, "Recalculate failure occurred"},
1085
1086 {0x6E00, "Command to logical unit failed"},
1087
1088 {0x6F00, "Copy protection key exchange failure - authentication "
1089 "failure"},
1090 {0x6F01, "Copy protection key exchange failure - key not present"},
1091 {0x6F02, "Copy protection key exchange failure - key not established"},
1092 {0x6F03, "Read of scrambled sector without authentication"},
1093 {0x6F04, "Media region code is mismatched to logical unit region"},
1094 {0x6F05, "Drive region must be permanent/region reset count error"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -04001095 {0x6F06, "Insufficient block count for binding nonce recording"},
1096 {0x6F07, "Conflict in binding nonce recording"},
Linus Torvalds1da177e2005-04-16 15:20:36 -07001097/*
1098 * {0x70NN, "Decompression exception short algorithm id of nn"},
1099 */
1100 {0x7100, "Decompression exception long algorithm id"},
1101
1102 {0x7200, "Session fixation error"},
1103 {0x7201, "Session fixation error writing lead-in"},
1104 {0x7202, "Session fixation error writing lead-out"},
1105 {0x7203, "Session fixation error - incomplete track in session"},
1106 {0x7204, "Empty or partially written reserved track"},
1107 {0x7205, "No more track reservations allowed"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -04001108 {0x7206, "RMZ extension is not allowed"},
1109 {0x7207, "No more test zone extensions are allowed"},
Linus Torvalds1da177e2005-04-16 15:20:36 -07001110
1111 {0x7300, "Cd control error"},
1112 {0x7301, "Power calibration area almost full"},
1113 {0x7302, "Power calibration area is full"},
1114 {0x7303, "Power calibration area error"},
1115 {0x7304, "Program memory area update failure"},
1116 {0x7305, "Program memory area is full"},
1117 {0x7306, "RMA/PMA is almost full"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -04001118 {0x7310, "Current power calibration area almost full"},
1119 {0x7311, "Current power calibration area is full"},
1120 {0x7317, "RDZ is full"},
1121
1122 {0x7400, "Security error"},
1123 {0x7401, "Unable to decrypt data"},
1124 {0x7402, "Unencrypted data encountered while decrypting"},
1125 {0x7403, "Incorrect data encryption key"},
1126 {0x7404, "Cryptographic integrity validation failed"},
1127 {0x7405, "Error decrypting data"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001128 {0x7406, "Unknown signature verification key"},
1129 {0x7407, "Encryption parameters not useable"},
1130 {0x7408, "Digital signature validation failure"},
1131 {0x7409, "Encryption mode mismatch on read"},
1132 {0x740A, "Encrypted block not raw read enabled"},
1133 {0x740B, "Incorrect Encryption parameters"},
1134 {0x740C, "Unable to decrypt parameter list"},
1135 {0x740D, "Encryption algorithm disabled"},
1136 {0x7410, "SA creation parameter value invalid"},
1137 {0x7411, "SA creation parameter value rejected"},
1138 {0x7412, "Invalid SA usage"},
1139 {0x7421, "Data Encryption configuration prevented"},
1140 {0x7430, "SA creation parameter not supported"},
1141 {0x7440, "Authentication failed"},
1142 {0x7461, "External data encryption key manager access error"},
1143 {0x7462, "External data encryption key manager error"},
1144 {0x7463, "External data encryption key not found"},
1145 {0x7464, "External data encryption request not authorized"},
1146 {0x746E, "External data encryption control timeout"},
1147 {0x746F, "External data encryption control error"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -04001148 {0x7471, "Logical unit access not authorized"},
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001149 {0x7479, "Security conflict in translated device"},
Douglas Gilberta507c6a2006-07-02 13:48:10 -04001150
Linus Torvalds1da177e2005-04-16 15:20:36 -07001151 {0, NULL}
1152};
1153
1154struct error_info2 {
1155 unsigned char code1, code2_min, code2_max;
1156 const char * fmt;
1157};
1158
Arjan van de Ven0ad78202005-11-28 16:22:25 +01001159static const struct error_info2 additional2[] =
Linus Torvalds1da177e2005-04-16 15:20:36 -07001160{
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001161 {0x40, 0x00, 0x7f, "Ram failure (%x)"},
1162 {0x40, 0x80, 0xff, "Diagnostic failure on component (%x)"},
1163 {0x41, 0x00, 0xff, "Data path failure (%x)"},
1164 {0x42, 0x00, 0xff, "Power-on or self-test failure (%x)"},
1165 {0x4D, 0x00, 0xff, "Tagged overlapped commands (task tag %x)"},
1166 {0x70, 0x00, 0xff, "Decompression exception short algorithm id of %x"},
Linus Torvalds1da177e2005-04-16 15:20:36 -07001167 {0, 0, 0, NULL}
1168};
1169
1170/* description of the sense key values */
Arjan van de Ven0ad78202005-11-28 16:22:25 +01001171static const char * const snstext[] = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001172 "No Sense", /* 0: There is no sense information */
1173 "Recovered Error", /* 1: The last command completed successfully
1174 but used error correction */
1175 "Not Ready", /* 2: The addressed target is not ready */
1176 "Medium Error", /* 3: Data error detected on the medium */
1177 "Hardware Error", /* 4: Controller or device failure */
1178 "Illegal Request", /* 5: Error in request */
1179 "Unit Attention", /* 6: Removable medium was changed, or
1180 the target has been reset, or ... */
1181 "Data Protect", /* 7: Access to the data is blocked */
1182 "Blank Check", /* 8: Reached unexpected written or unwritten
1183 region of the medium */
1184 "Vendor Specific(9)",
1185 "Copy Aborted", /* A: COPY or COMPARE was aborted */
1186 "Aborted Command", /* B: The target aborted the command */
1187 "Equal", /* C: A SEARCH DATA command found data equal */
1188 "Volume Overflow", /* D: Medium full with still data to be written */
1189 "Miscompare", /* E: Source data and data on the medium
1190 do not agree */
1191};
1192#endif
1193
1194/* Get sense key string or NULL if not available */
1195const char *
1196scsi_sense_key_string(unsigned char key) {
1197#ifdef CONFIG_SCSI_CONSTANTS
1198 if (key <= 0xE)
1199 return snstext[key];
1200#endif
1201 return NULL;
1202}
1203EXPORT_SYMBOL(scsi_sense_key_string);
1204
1205/*
1206 * Get additional sense code string or NULL if not available.
1207 * This string may contain a "%x" and should be printed with ascq as arg.
1208 */
1209const char *
1210scsi_extd_sense_format(unsigned char asc, unsigned char ascq) {
1211#ifdef CONFIG_SCSI_CONSTANTS
1212 int i;
1213 unsigned short code = ((asc << 8) | ascq);
1214
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001215 for (i = 0; additional[i].text; i++)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001216 if (additional[i].code12 == code)
1217 return additional[i].text;
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001218 for (i = 0; additional2[i].fmt; i++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001219 if (additional2[i].code1 == asc &&
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001220 ascq >= additional2[i].code2_min &&
1221 ascq <= additional2[i].code2_max)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001222 return additional2[i].fmt;
Douglas Gilbertb4567ca2009-06-25 15:43:02 -04001223 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001224#endif
1225 return NULL;
1226}
1227EXPORT_SYMBOL(scsi_extd_sense_format);
1228
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001229void
Linus Torvalds1da177e2005-04-16 15:20:36 -07001230scsi_show_extd_sense(unsigned char asc, unsigned char ascq)
1231{
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001232 const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001233
1234 if (extd_sense_fmt) {
1235 if (strstr(extd_sense_fmt, "%x")) {
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001236 printk("Add. Sense: ");
Linus Torvalds1da177e2005-04-16 15:20:36 -07001237 printk(extd_sense_fmt, ascq);
1238 } else
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001239 printk("Add. Sense: %s", extd_sense_fmt);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001240 } else {
1241 if (asc >= 0x80)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001242 printk("<<vendor>> ASC=0x%x ASCQ=0x%x", asc,
1243 ascq);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001244 if (ascq >= 0x80)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001245 printk("ASC=0x%x <<vendor>> ASCQ=0x%x", asc,
1246 ascq);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001247 else
1248 printk("ASC=0x%x ASCQ=0x%x", asc, ascq);
1249 }
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001250
1251 printk("\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -07001252}
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001253EXPORT_SYMBOL(scsi_show_extd_sense);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001254
James Bottomleyea73a9f2005-08-28 11:33:52 -05001255void
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001256scsi_show_sense_hdr(struct scsi_sense_hdr *sshdr)
James Bottomleyea73a9f2005-08-28 11:33:52 -05001257{
1258 const char *sense_txt;
James Bottomleyea73a9f2005-08-28 11:33:52 -05001259
1260 sense_txt = scsi_sense_key_string(sshdr->sense_key);
1261 if (sense_txt)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001262 printk("Sense Key : %s ", sense_txt);
James Bottomleyea73a9f2005-08-28 11:33:52 -05001263 else
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001264 printk("Sense Key : 0x%x ", sshdr->sense_key);
1265
1266 printk("%s", scsi_sense_is_deferred(sshdr) ? "[deferred] " :
1267 "[current] ");
1268
1269 if (sshdr->response_code >= 0x72)
1270 printk("[descriptor]");
1271
James Bottomleyea73a9f2005-08-28 11:33:52 -05001272 printk("\n");
1273}
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001274EXPORT_SYMBOL(scsi_show_sense_hdr);
1275
1276/*
1277 * Print normalized SCSI sense header with a prefix.
1278 */
1279void
1280scsi_print_sense_hdr(const char *name, struct scsi_sense_hdr *sshdr)
1281{
1282 printk(KERN_INFO "%s: ", name);
1283 scsi_show_sense_hdr(sshdr);
1284 printk(KERN_INFO "%s: ", name);
1285 scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
1286}
James Bottomleyea73a9f2005-08-28 11:33:52 -05001287EXPORT_SYMBOL(scsi_print_sense_hdr);
1288
James Bottomley311b5812007-09-23 09:08:46 -05001289/*
1290 * Print normalized SCSI sense header with device information and a prefix.
1291 */
1292void
1293scsi_cmd_print_sense_hdr(struct scsi_cmnd *scmd, const char *desc,
1294 struct scsi_sense_hdr *sshdr)
1295{
1296 scmd_printk(KERN_INFO, scmd, "%s: ", desc);
1297 scsi_show_sense_hdr(sshdr);
1298 scmd_printk(KERN_INFO, scmd, "%s: ", desc);
1299 scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
1300}
1301EXPORT_SYMBOL(scsi_cmd_print_sense_hdr);
1302
Adrian Bunk8f8bf7e2007-08-10 14:50:43 -07001303static void
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001304scsi_decode_sense_buffer(const unsigned char *sense_buffer, int sense_len,
1305 struct scsi_sense_hdr *sshdr)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001306{
1307 int k, num, res;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001308
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001309 res = scsi_normalize_sense(sense_buffer, sense_len, sshdr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001310 if (0 == res) {
1311 /* this may be SCSI-1 sense data */
1312 num = (sense_len < 32) ? sense_len : 32;
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001313 printk("Unrecognized sense data (in hex):");
Linus Torvalds1da177e2005-04-16 15:20:36 -07001314 for (k = 0; k < num; ++k) {
1315 if (0 == (k % 16)) {
1316 printk("\n");
1317 printk(KERN_INFO " ");
1318 }
1319 printk("%02x ", sense_buffer[k]);
1320 }
1321 printk("\n");
1322 return;
1323 }
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001324}
1325
Adrian Bunk8f8bf7e2007-08-10 14:50:43 -07001326static void
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001327scsi_decode_sense_extras(const unsigned char *sense_buffer, int sense_len,
1328 struct scsi_sense_hdr *sshdr)
1329{
1330 int k, num, res;
1331
1332 if (sshdr->response_code < 0x72)
1333 {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001334 /* only decode extras for "fixed" format now */
1335 char buff[80];
1336 int blen, fixed_valid;
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001337 unsigned int info;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001338
1339 fixed_valid = sense_buffer[0] & 0x80;
1340 info = ((sense_buffer[3] << 24) | (sense_buffer[4] << 16) |
1341 (sense_buffer[5] << 8) | sense_buffer[6]);
1342 res = 0;
1343 memset(buff, 0, sizeof(buff));
1344 blen = sizeof(buff) - 1;
1345 if (fixed_valid)
1346 res += snprintf(buff + res, blen - res,
1347 "Info fld=0x%x", info);
1348 if (sense_buffer[2] & 0x80) {
1349 /* current command has read a filemark */
1350 if (res > 0)
1351 res += snprintf(buff + res, blen - res, ", ");
1352 res += snprintf(buff + res, blen - res, "FMK");
1353 }
1354 if (sense_buffer[2] & 0x40) {
1355 /* end-of-medium condition exists */
1356 if (res > 0)
1357 res += snprintf(buff + res, blen - res, ", ");
1358 res += snprintf(buff + res, blen - res, "EOM");
1359 }
1360 if (sense_buffer[2] & 0x20) {
1361 /* incorrect block length requested */
1362 if (res > 0)
1363 res += snprintf(buff + res, blen - res, ", ");
1364 res += snprintf(buff + res, blen - res, "ILI");
1365 }
1366 if (res > 0)
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001367 printk("%s\n", buff);
1368 } else if (sshdr->additional_length > 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001369 /* descriptor format with sense descriptors */
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001370 num = 8 + sshdr->additional_length;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001371 num = (sense_len < num) ? sense_len : num;
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001372 printk("Descriptor sense data with sense descriptors "
1373 "(in hex):");
Linus Torvalds1da177e2005-04-16 15:20:36 -07001374 for (k = 0; k < num; ++k) {
1375 if (0 == (k % 16)) {
1376 printk("\n");
1377 printk(KERN_INFO " ");
1378 }
1379 printk("%02x ", sense_buffer[k]);
1380 }
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001381
Linus Torvalds1da177e2005-04-16 15:20:36 -07001382 printk("\n");
1383 }
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001384
1385}
1386
1387/* Normalize and print sense buffer with name prefix */
1388void __scsi_print_sense(const char *name, const unsigned char *sense_buffer,
1389 int sense_len)
1390{
1391 struct scsi_sense_hdr sshdr;
1392
1393 printk(KERN_INFO "%s: ", name);
1394 scsi_decode_sense_buffer(sense_buffer, sense_len, &sshdr);
1395 scsi_show_sense_hdr(&sshdr);
1396 scsi_decode_sense_extras(sense_buffer, sense_len, &sshdr);
1397 printk(KERN_INFO "%s: ", name);
1398 scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001399}
1400EXPORT_SYMBOL(__scsi_print_sense);
1401
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001402/* Normalize and print sense buffer in SCSI command */
1403void scsi_print_sense(char *name, struct scsi_cmnd *cmd)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001404{
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001405 struct scsi_sense_hdr sshdr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001406
Jean Sacren6f131ce2010-08-25 17:58:09 -06001407 scmd_printk(KERN_INFO, cmd, " ");
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001408 scsi_decode_sense_buffer(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
1409 &sshdr);
1410 scsi_show_sense_hdr(&sshdr);
1411 scsi_decode_sense_extras(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
1412 &sshdr);
Jean Sacren6f131ce2010-08-25 17:58:09 -06001413 scmd_printk(KERN_INFO, cmd, " ");
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001414 scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001415}
1416EXPORT_SYMBOL(scsi_print_sense);
1417
Linus Torvalds1da177e2005-04-16 15:20:36 -07001418#ifdef CONFIG_SCSI_CONSTANTS
1419
Arjan van de Ven0ad78202005-11-28 16:22:25 +01001420static const char * const hostbyte_table[]={
Tobias Klauser6391a112006-06-08 22:23:48 -07001421"DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET",
Linus Torvalds1da177e2005-04-16 15:20:36 -07001422"DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR",
Mike Christiea4dfaa62008-08-19 18:45:25 -05001423"DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE",
1424"DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST" };
Tobias Klauser6391a112006-06-08 22:23:48 -07001425#define NUM_HOSTBYTE_STRS ARRAY_SIZE(hostbyte_table)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001426
Arjan van de Ven0ad78202005-11-28 16:22:25 +01001427static const char * const driverbyte_table[]={
Tobias Klauser6391a112006-06-08 22:23:48 -07001428"DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR",
Linus Torvalds1da177e2005-04-16 15:20:36 -07001429"DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"};
Tobias Klauser6391a112006-06-08 22:23:48 -07001430#define NUM_DRIVERBYTE_STRS ARRAY_SIZE(driverbyte_table)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001431
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001432void scsi_show_result(int result)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001433{
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001434 int hb = host_byte(result);
Martin K. Petersen1c9fbaf2009-01-04 03:14:11 -05001435 int db = driver_byte(result);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001436
Martin K. Petersen1c9fbaf2009-01-04 03:14:11 -05001437 printk("Result: hostbyte=%s driverbyte=%s\n",
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001438 (hb < NUM_HOSTBYTE_STRS ? hostbyte_table[hb] : "invalid"),
Martin K. Petersen1c9fbaf2009-01-04 03:14:11 -05001439 (db < NUM_DRIVERBYTE_STRS ? driverbyte_table[db] : "invalid"));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001440}
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001441
Linus Torvalds1da177e2005-04-16 15:20:36 -07001442#else
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001443
1444void scsi_show_result(int result)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001445{
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001446 printk("Result: hostbyte=0x%02x driverbyte=0x%02x\n",
1447 host_byte(result), driver_byte(result));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001448}
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001449
Linus Torvalds1da177e2005-04-16 15:20:36 -07001450#endif
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001451EXPORT_SYMBOL(scsi_show_result);
1452
1453
1454void scsi_print_result(struct scsi_cmnd *cmd)
1455{
Jean Sacren6f131ce2010-08-25 17:58:09 -06001456 scmd_printk(KERN_INFO, cmd, " ");
Martin K. Petersen684b7fe2007-02-27 22:39:44 -05001457 scsi_show_result(cmd->result);
1458}
1459EXPORT_SYMBOL(scsi_print_result);
1460
1461