blob: 3ac36f5ccd3e13ddc81b3801ff196ee815742790 [file] [log] [blame]
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001/*
2 * Copyright (C) 2004 Texas Instruments, Inc.
3 *
4 * Some parts based tps65010.c:
5 * Copyright (C) 2004 Texas Instruments and
6 * Copyright (C) 2004-2005 David Brownell
7 *
8 * Some parts based on tlv320aic24.c:
9 * Copyright (C) by Kai Svahn <kai.svahn@nokia.com>
10 *
11 * Changes for interrupt handling and clean-up by
12 * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com>
13 * Cleanup and generalized support for voltage setting by
14 * Juha Yrjola
15 * Added support for controlling VCORE and regulator sleep states,
16 * Amit Kucheria <amit.kucheria@nokia.com>
17 * Copyright (C) 2005, 2006 Nokia Corporation
18 *
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
23 *
24 * This program is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
28 *
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
32 */
33
34#include <linux/module.h>
35#include <linux/i2c.h>
36#include <linux/interrupt.h>
37#include <linux/sched.h>
38#include <linux/mutex.h>
39#include <linux/workqueue.h>
40#include <linux/delay.h>
41#include <linux/rtc.h>
42#include <linux/bcd.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090043#include <linux/slab.h>
Tony Lindgren7bd3b612012-10-15 13:53:41 -070044#include <linux/mfd/menelaus.h>
Tony Lindgren0c4a59f2007-07-17 04:06:09 -070045
Tony Lindgren0c4a59f2007-07-17 04:06:09 -070046#include <asm/mach/irq.h>
47
Russell King1bc857f2011-07-26 10:54:55 +010048#include <asm/gpio.h>
Tony Lindgren0c4a59f2007-07-17 04:06:09 -070049
50#define DRIVER_NAME "menelaus"
51
Tony Lindgren0c4a59f2007-07-17 04:06:09 -070052#define MENELAUS_I2C_ADDRESS 0x72
53
54#define MENELAUS_REV 0x01
55#define MENELAUS_VCORE_CTRL1 0x02
56#define MENELAUS_VCORE_CTRL2 0x03
57#define MENELAUS_VCORE_CTRL3 0x04
58#define MENELAUS_VCORE_CTRL4 0x05
59#define MENELAUS_VCORE_CTRL5 0x06
60#define MENELAUS_DCDC_CTRL1 0x07
61#define MENELAUS_DCDC_CTRL2 0x08
62#define MENELAUS_DCDC_CTRL3 0x09
63#define MENELAUS_LDO_CTRL1 0x0A
64#define MENELAUS_LDO_CTRL2 0x0B
65#define MENELAUS_LDO_CTRL3 0x0C
66#define MENELAUS_LDO_CTRL4 0x0D
67#define MENELAUS_LDO_CTRL5 0x0E
68#define MENELAUS_LDO_CTRL6 0x0F
69#define MENELAUS_LDO_CTRL7 0x10
70#define MENELAUS_LDO_CTRL8 0x11
71#define MENELAUS_SLEEP_CTRL1 0x12
72#define MENELAUS_SLEEP_CTRL2 0x13
73#define MENELAUS_DEVICE_OFF 0x14
74#define MENELAUS_OSC_CTRL 0x15
75#define MENELAUS_DETECT_CTRL 0x16
76#define MENELAUS_INT_MASK1 0x17
77#define MENELAUS_INT_MASK2 0x18
78#define MENELAUS_INT_STATUS1 0x19
79#define MENELAUS_INT_STATUS2 0x1A
80#define MENELAUS_INT_ACK1 0x1B
81#define MENELAUS_INT_ACK2 0x1C
82#define MENELAUS_GPIO_CTRL 0x1D
83#define MENELAUS_GPIO_IN 0x1E
84#define MENELAUS_GPIO_OUT 0x1F
85#define MENELAUS_BBSMS 0x20
86#define MENELAUS_RTC_CTRL 0x21
87#define MENELAUS_RTC_UPDATE 0x22
88#define MENELAUS_RTC_SEC 0x23
89#define MENELAUS_RTC_MIN 0x24
90#define MENELAUS_RTC_HR 0x25
91#define MENELAUS_RTC_DAY 0x26
92#define MENELAUS_RTC_MON 0x27
93#define MENELAUS_RTC_YR 0x28
94#define MENELAUS_RTC_WKDAY 0x29
95#define MENELAUS_RTC_AL_SEC 0x2A
96#define MENELAUS_RTC_AL_MIN 0x2B
97#define MENELAUS_RTC_AL_HR 0x2C
98#define MENELAUS_RTC_AL_DAY 0x2D
99#define MENELAUS_RTC_AL_MON 0x2E
100#define MENELAUS_RTC_AL_YR 0x2F
101#define MENELAUS_RTC_COMP_MSB 0x30
102#define MENELAUS_RTC_COMP_LSB 0x31
103#define MENELAUS_S1_PULL_EN 0x32
104#define MENELAUS_S1_PULL_DIR 0x33
105#define MENELAUS_S2_PULL_EN 0x34
106#define MENELAUS_S2_PULL_DIR 0x35
107#define MENELAUS_MCT_CTRL1 0x36
108#define MENELAUS_MCT_CTRL2 0x37
109#define MENELAUS_MCT_CTRL3 0x38
110#define MENELAUS_MCT_PIN_ST 0x39
111#define MENELAUS_DEBOUNCE1 0x3A
112
113#define IH_MENELAUS_IRQS 12
114#define MENELAUS_MMC_S1CD_IRQ 0 /* MMC slot 1 card change */
115#define MENELAUS_MMC_S2CD_IRQ 1 /* MMC slot 2 card change */
116#define MENELAUS_MMC_S1D1_IRQ 2 /* MMC DAT1 low in slot 1 */
117#define MENELAUS_MMC_S2D1_IRQ 3 /* MMC DAT1 low in slot 2 */
118#define MENELAUS_LOWBAT_IRQ 4 /* Low battery */
119#define MENELAUS_HOTDIE_IRQ 5 /* Hot die detect */
120#define MENELAUS_UVLO_IRQ 6 /* UVLO detect */
121#define MENELAUS_TSHUT_IRQ 7 /* Thermal shutdown */
122#define MENELAUS_RTCTMR_IRQ 8 /* RTC timer */
123#define MENELAUS_RTCALM_IRQ 9 /* RTC alarm */
124#define MENELAUS_RTCERR_IRQ 10 /* RTC error */
125#define MENELAUS_PSHBTN_IRQ 11 /* Push button */
126#define MENELAUS_RESERVED12_IRQ 12 /* Reserved */
127#define MENELAUS_RESERVED13_IRQ 13 /* Reserved */
128#define MENELAUS_RESERVED14_IRQ 14 /* Reserved */
129#define MENELAUS_RESERVED15_IRQ 15 /* Reserved */
130
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300131/* VCORE_CTRL1 register */
132#define VCORE_CTRL1_BYP_COMP (1 << 5)
133#define VCORE_CTRL1_HW_NSW (1 << 7)
134
135/* GPIO_CTRL register */
136#define GPIO_CTRL_SLOTSELEN (1 << 5)
137#define GPIO_CTRL_SLPCTLEN (1 << 6)
138#define GPIO1_DIR_INPUT (1 << 0)
139#define GPIO2_DIR_INPUT (1 << 1)
140#define GPIO3_DIR_INPUT (1 << 2)
141
142/* MCT_CTRL1 register */
143#define MCT_CTRL1_S1_CMD_OD (1 << 2)
144#define MCT_CTRL1_S2_CMD_OD (1 << 3)
145
146/* MCT_CTRL2 register */
147#define MCT_CTRL2_VS2_SEL_D0 (1 << 0)
148#define MCT_CTRL2_VS2_SEL_D1 (1 << 1)
149#define MCT_CTRL2_S1CD_BUFEN (1 << 4)
150#define MCT_CTRL2_S2CD_BUFEN (1 << 5)
151#define MCT_CTRL2_S1CD_DBEN (1 << 6)
152#define MCT_CTRL2_S2CD_BEN (1 << 7)
153
154/* MCT_CTRL3 register */
155#define MCT_CTRL3_SLOT1_EN (1 << 0)
156#define MCT_CTRL3_SLOT2_EN (1 << 1)
157#define MCT_CTRL3_S1_AUTO_EN (1 << 2)
158#define MCT_CTRL3_S2_AUTO_EN (1 << 3)
159
160/* MCT_PIN_ST register */
161#define MCT_PIN_ST_S1_CD_ST (1 << 0)
162#define MCT_PIN_ST_S2_CD_ST (1 << 1)
163
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700164static void menelaus_work(struct work_struct *_menelaus);
165
166struct menelaus_chip {
167 struct mutex lock;
168 struct i2c_client *client;
169 struct work_struct work;
170#ifdef CONFIG_RTC_DRV_TWL92330
171 struct rtc_device *rtc;
172 u8 rtc_control;
173 unsigned uie:1;
174#endif
175 unsigned vcore_hw_mode:1;
176 u8 mask1, mask2;
177 void (*handlers[16])(struct menelaus_chip *);
178 void (*mmc_callback)(void *data, u8 mask);
179 void *mmc_callback_data;
180};
181
182static struct menelaus_chip *the_menelaus;
183
184static int menelaus_write_reg(int reg, u8 value)
185{
186 int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
187
188 if (val < 0) {
Emil Medve1f7c8232007-10-16 23:29:48 -0700189 pr_err(DRIVER_NAME ": write error");
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700190 return val;
191 }
192
193 return 0;
194}
195
196static int menelaus_read_reg(int reg)
197{
198 int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
199
200 if (val < 0)
Emil Medve1f7c8232007-10-16 23:29:48 -0700201 pr_err(DRIVER_NAME ": read error");
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700202
203 return val;
204}
205
206static int menelaus_enable_irq(int irq)
207{
208 if (irq > 7) {
209 irq -= 8;
210 the_menelaus->mask2 &= ~(1 << irq);
211 return menelaus_write_reg(MENELAUS_INT_MASK2,
212 the_menelaus->mask2);
213 } else {
214 the_menelaus->mask1 &= ~(1 << irq);
215 return menelaus_write_reg(MENELAUS_INT_MASK1,
216 the_menelaus->mask1);
217 }
218}
219
220static int menelaus_disable_irq(int irq)
221{
222 if (irq > 7) {
223 irq -= 8;
224 the_menelaus->mask2 |= (1 << irq);
225 return menelaus_write_reg(MENELAUS_INT_MASK2,
226 the_menelaus->mask2);
227 } else {
228 the_menelaus->mask1 |= (1 << irq);
229 return menelaus_write_reg(MENELAUS_INT_MASK1,
230 the_menelaus->mask1);
231 }
232}
233
234static int menelaus_ack_irq(int irq)
235{
236 if (irq > 7)
237 return menelaus_write_reg(MENELAUS_INT_ACK2, 1 << (irq - 8));
238 else
239 return menelaus_write_reg(MENELAUS_INT_ACK1, 1 << irq);
240}
241
242/* Adds a handler for an interrupt. Does not run in interrupt context */
243static int menelaus_add_irq_work(int irq,
244 void (*handler)(struct menelaus_chip *))
245{
246 int ret = 0;
247
248 mutex_lock(&the_menelaus->lock);
249 the_menelaus->handlers[irq] = handler;
250 ret = menelaus_enable_irq(irq);
251 mutex_unlock(&the_menelaus->lock);
252
253 return ret;
254}
255
256/* Removes handler for an interrupt */
257static int menelaus_remove_irq_work(int irq)
258{
259 int ret = 0;
260
261 mutex_lock(&the_menelaus->lock);
262 ret = menelaus_disable_irq(irq);
263 the_menelaus->handlers[irq] = NULL;
264 mutex_unlock(&the_menelaus->lock);
265
266 return ret;
267}
268
269/*
270 * Gets scheduled when a card detect interrupt happens. Note that in some cases
271 * this line is wired to card cover switch rather than the card detect switch
272 * in each slot. In this case the cards are not seen by menelaus.
273 * FIXME: Add handling for D1 too
274 */
275static void menelaus_mmc_cd_work(struct menelaus_chip *menelaus_hw)
276{
277 int reg;
278 unsigned char card_mask = 0;
279
280 reg = menelaus_read_reg(MENELAUS_MCT_PIN_ST);
281 if (reg < 0)
282 return;
283
284 if (!(reg & 0x1))
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300285 card_mask |= MCT_PIN_ST_S1_CD_ST;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700286
287 if (!(reg & 0x2))
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300288 card_mask |= MCT_PIN_ST_S2_CD_ST;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700289
290 if (menelaus_hw->mmc_callback)
291 menelaus_hw->mmc_callback(menelaus_hw->mmc_callback_data,
292 card_mask);
293}
294
295/*
296 * Toggles the MMC slots between open-drain and push-pull mode.
297 */
298int menelaus_set_mmc_opendrain(int slot, int enable)
299{
300 int ret, val;
301
302 if (slot != 1 && slot != 2)
303 return -EINVAL;
304 mutex_lock(&the_menelaus->lock);
305 ret = menelaus_read_reg(MENELAUS_MCT_CTRL1);
306 if (ret < 0) {
307 mutex_unlock(&the_menelaus->lock);
308 return ret;
309 }
310 val = ret;
311 if (slot == 1) {
312 if (enable)
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300313 val |= MCT_CTRL1_S1_CMD_OD;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700314 else
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300315 val &= ~MCT_CTRL1_S1_CMD_OD;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700316 } else {
317 if (enable)
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300318 val |= MCT_CTRL1_S2_CMD_OD;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700319 else
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300320 val &= ~MCT_CTRL1_S2_CMD_OD;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700321 }
322 ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, val);
323 mutex_unlock(&the_menelaus->lock);
324
325 return ret;
326}
327EXPORT_SYMBOL(menelaus_set_mmc_opendrain);
328
329int menelaus_set_slot_sel(int enable)
330{
331 int ret;
332
333 mutex_lock(&the_menelaus->lock);
334 ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
335 if (ret < 0)
336 goto out;
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300337 ret |= GPIO2_DIR_INPUT;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700338 if (enable)
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300339 ret |= GPIO_CTRL_SLOTSELEN;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700340 else
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300341 ret &= ~GPIO_CTRL_SLOTSELEN;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700342 ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
343out:
344 mutex_unlock(&the_menelaus->lock);
345 return ret;
346}
347EXPORT_SYMBOL(menelaus_set_slot_sel);
348
349int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en)
350{
351 int ret, val;
352
353 if (slot != 1 && slot != 2)
354 return -EINVAL;
355 if (power >= 3)
356 return -EINVAL;
357
358 mutex_lock(&the_menelaus->lock);
359
360 ret = menelaus_read_reg(MENELAUS_MCT_CTRL2);
361 if (ret < 0)
362 goto out;
363 val = ret;
364 if (slot == 1) {
365 if (cd_en)
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300366 val |= MCT_CTRL2_S1CD_BUFEN | MCT_CTRL2_S1CD_DBEN;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700367 else
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300368 val &= ~(MCT_CTRL2_S1CD_BUFEN | MCT_CTRL2_S1CD_DBEN);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700369 } else {
370 if (cd_en)
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300371 val |= MCT_CTRL2_S2CD_BUFEN | MCT_CTRL2_S2CD_BEN;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700372 else
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300373 val &= ~(MCT_CTRL2_S2CD_BUFEN | MCT_CTRL2_S2CD_BEN);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700374 }
375 ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, val);
376 if (ret < 0)
377 goto out;
378
379 ret = menelaus_read_reg(MENELAUS_MCT_CTRL3);
380 if (ret < 0)
381 goto out;
382 val = ret;
383 if (slot == 1) {
384 if (enable)
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300385 val |= MCT_CTRL3_SLOT1_EN;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700386 else
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300387 val &= ~MCT_CTRL3_SLOT1_EN;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700388 } else {
389 int b;
390
391 if (enable)
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300392 val |= MCT_CTRL3_SLOT2_EN;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700393 else
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300394 val &= ~MCT_CTRL3_SLOT2_EN;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700395 b = menelaus_read_reg(MENELAUS_MCT_CTRL2);
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300396 b &= ~(MCT_CTRL2_VS2_SEL_D0 | MCT_CTRL2_VS2_SEL_D1);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700397 b |= power;
398 ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, b);
399 if (ret < 0)
400 goto out;
401 }
402 /* Disable autonomous shutdown */
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300403 val &= ~(MCT_CTRL3_S1_AUTO_EN | MCT_CTRL3_S2_AUTO_EN);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700404 ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val);
405out:
406 mutex_unlock(&the_menelaus->lock);
407 return ret;
408}
409EXPORT_SYMBOL(menelaus_set_mmc_slot);
410
411int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
412 void *data)
413{
414 int ret = 0;
415
416 the_menelaus->mmc_callback_data = data;
417 the_menelaus->mmc_callback = callback;
418 ret = menelaus_add_irq_work(MENELAUS_MMC_S1CD_IRQ,
419 menelaus_mmc_cd_work);
420 if (ret < 0)
421 return ret;
422 ret = menelaus_add_irq_work(MENELAUS_MMC_S2CD_IRQ,
423 menelaus_mmc_cd_work);
424 if (ret < 0)
425 return ret;
426 ret = menelaus_add_irq_work(MENELAUS_MMC_S1D1_IRQ,
427 menelaus_mmc_cd_work);
428 if (ret < 0)
429 return ret;
430 ret = menelaus_add_irq_work(MENELAUS_MMC_S2D1_IRQ,
431 menelaus_mmc_cd_work);
432
433 return ret;
434}
435EXPORT_SYMBOL(menelaus_register_mmc_callback);
436
437void menelaus_unregister_mmc_callback(void)
438{
439 menelaus_remove_irq_work(MENELAUS_MMC_S1CD_IRQ);
440 menelaus_remove_irq_work(MENELAUS_MMC_S2CD_IRQ);
441 menelaus_remove_irq_work(MENELAUS_MMC_S1D1_IRQ);
442 menelaus_remove_irq_work(MENELAUS_MMC_S2D1_IRQ);
443
444 the_menelaus->mmc_callback = NULL;
Jingoo Han59a9f7a2013-08-02 15:01:01 +0900445 the_menelaus->mmc_callback_data = NULL;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700446}
447EXPORT_SYMBOL(menelaus_unregister_mmc_callback);
448
449struct menelaus_vtg {
450 const char *name;
451 u8 vtg_reg;
452 u8 vtg_shift;
453 u8 vtg_bits;
454 u8 mode_reg;
455};
456
457struct menelaus_vtg_value {
458 u16 vtg;
459 u16 val;
460};
461
462static int menelaus_set_voltage(const struct menelaus_vtg *vtg, int mV,
463 int vtg_val, int mode)
464{
465 int val, ret;
466 struct i2c_client *c = the_menelaus->client;
467
468 mutex_lock(&the_menelaus->lock);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700469
470 ret = menelaus_read_reg(vtg->vtg_reg);
471 if (ret < 0)
472 goto out;
473 val = ret & ~(((1 << vtg->vtg_bits) - 1) << vtg->vtg_shift);
474 val |= vtg_val << vtg->vtg_shift;
475
476 dev_dbg(&c->dev, "Setting voltage '%s'"
477 "to %d mV (reg 0x%02x, val 0x%02x)\n",
478 vtg->name, mV, vtg->vtg_reg, val);
479
480 ret = menelaus_write_reg(vtg->vtg_reg, val);
481 if (ret < 0)
482 goto out;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700483 ret = menelaus_write_reg(vtg->mode_reg, mode);
484out:
485 mutex_unlock(&the_menelaus->lock);
486 if (ret == 0) {
487 /* Wait for voltage to stabilize */
488 msleep(1);
489 }
490 return ret;
491}
492
493static int menelaus_get_vtg_value(int vtg, const struct menelaus_vtg_value *tbl,
494 int n)
495{
496 int i;
497
498 for (i = 0; i < n; i++, tbl++)
499 if (tbl->vtg == vtg)
500 return tbl->val;
501 return -EINVAL;
502}
503
504/*
505 * Vcore can be programmed in two ways:
506 * SW-controlled: Required voltage is programmed into VCORE_CTRL1
507 * HW-controlled: Required range (roof-floor) is programmed into VCORE_CTRL3
508 * and VCORE_CTRL4
509 *
510 * Call correct 'set' function accordingly
511 */
512
513static const struct menelaus_vtg_value vcore_values[] = {
514 { 1000, 0 },
515 { 1025, 1 },
516 { 1050, 2 },
517 { 1075, 3 },
518 { 1100, 4 },
519 { 1125, 5 },
520 { 1150, 6 },
521 { 1175, 7 },
522 { 1200, 8 },
523 { 1225, 9 },
524 { 1250, 10 },
525 { 1275, 11 },
526 { 1300, 12 },
527 { 1325, 13 },
528 { 1350, 14 },
529 { 1375, 15 },
530 { 1400, 16 },
531 { 1425, 17 },
532 { 1450, 18 },
533};
534
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700535int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV)
536{
537 int fval, rval, val, ret;
538 struct i2c_client *c = the_menelaus->client;
539
540 rval = menelaus_get_vtg_value(roof_mV, vcore_values,
541 ARRAY_SIZE(vcore_values));
542 if (rval < 0)
543 return -EINVAL;
544 fval = menelaus_get_vtg_value(floor_mV, vcore_values,
545 ARRAY_SIZE(vcore_values));
546 if (fval < 0)
547 return -EINVAL;
548
549 dev_dbg(&c->dev, "Setting VCORE FLOOR to %d mV and ROOF to %d mV\n",
550 floor_mV, roof_mV);
551
552 mutex_lock(&the_menelaus->lock);
553 ret = menelaus_write_reg(MENELAUS_VCORE_CTRL3, fval);
554 if (ret < 0)
555 goto out;
556 ret = menelaus_write_reg(MENELAUS_VCORE_CTRL4, rval);
557 if (ret < 0)
558 goto out;
559 if (!the_menelaus->vcore_hw_mode) {
560 val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
561 /* HW mode, turn OFF byte comparator */
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300562 val |= (VCORE_CTRL1_HW_NSW | VCORE_CTRL1_BYP_COMP);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700563 ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
564 the_menelaus->vcore_hw_mode = 1;
565 }
566 msleep(1);
567out:
568 mutex_unlock(&the_menelaus->lock);
569 return ret;
570}
571
572static const struct menelaus_vtg vmem_vtg = {
573 .name = "VMEM",
574 .vtg_reg = MENELAUS_LDO_CTRL1,
575 .vtg_shift = 0,
576 .vtg_bits = 2,
577 .mode_reg = MENELAUS_LDO_CTRL3,
578};
579
580static const struct menelaus_vtg_value vmem_values[] = {
581 { 1500, 0 },
582 { 1800, 1 },
583 { 1900, 2 },
584 { 2500, 3 },
585};
586
587int menelaus_set_vmem(unsigned int mV)
588{
589 int val;
590
591 if (mV == 0)
592 return menelaus_set_voltage(&vmem_vtg, 0, 0, 0);
593
594 val = menelaus_get_vtg_value(mV, vmem_values, ARRAY_SIZE(vmem_values));
595 if (val < 0)
596 return -EINVAL;
597 return menelaus_set_voltage(&vmem_vtg, mV, val, 0x02);
598}
599EXPORT_SYMBOL(menelaus_set_vmem);
600
601static const struct menelaus_vtg vio_vtg = {
602 .name = "VIO",
603 .vtg_reg = MENELAUS_LDO_CTRL1,
604 .vtg_shift = 2,
605 .vtg_bits = 2,
606 .mode_reg = MENELAUS_LDO_CTRL4,
607};
608
609static const struct menelaus_vtg_value vio_values[] = {
610 { 1500, 0 },
611 { 1800, 1 },
612 { 2500, 2 },
613 { 2800, 3 },
614};
615
616int menelaus_set_vio(unsigned int mV)
617{
618 int val;
619
620 if (mV == 0)
621 return menelaus_set_voltage(&vio_vtg, 0, 0, 0);
622
623 val = menelaus_get_vtg_value(mV, vio_values, ARRAY_SIZE(vio_values));
624 if (val < 0)
625 return -EINVAL;
626 return menelaus_set_voltage(&vio_vtg, mV, val, 0x02);
627}
628EXPORT_SYMBOL(menelaus_set_vio);
629
630static const struct menelaus_vtg_value vdcdc_values[] = {
631 { 1500, 0 },
632 { 1800, 1 },
633 { 2000, 2 },
634 { 2200, 3 },
635 { 2400, 4 },
636 { 2800, 5 },
637 { 3000, 6 },
638 { 3300, 7 },
639};
640
641static const struct menelaus_vtg vdcdc2_vtg = {
642 .name = "VDCDC2",
643 .vtg_reg = MENELAUS_DCDC_CTRL1,
644 .vtg_shift = 0,
645 .vtg_bits = 3,
646 .mode_reg = MENELAUS_DCDC_CTRL2,
647};
648
649static const struct menelaus_vtg vdcdc3_vtg = {
650 .name = "VDCDC3",
651 .vtg_reg = MENELAUS_DCDC_CTRL1,
652 .vtg_shift = 3,
653 .vtg_bits = 3,
654 .mode_reg = MENELAUS_DCDC_CTRL3,
655};
656
657int menelaus_set_vdcdc(int dcdc, unsigned int mV)
658{
659 const struct menelaus_vtg *vtg;
660 int val;
661
662 if (dcdc != 2 && dcdc != 3)
663 return -EINVAL;
664 if (dcdc == 2)
665 vtg = &vdcdc2_vtg;
666 else
667 vtg = &vdcdc3_vtg;
668
669 if (mV == 0)
670 return menelaus_set_voltage(vtg, 0, 0, 0);
671
672 val = menelaus_get_vtg_value(mV, vdcdc_values,
673 ARRAY_SIZE(vdcdc_values));
674 if (val < 0)
675 return -EINVAL;
676 return menelaus_set_voltage(vtg, mV, val, 0x03);
677}
678
679static const struct menelaus_vtg_value vmmc_values[] = {
680 { 1850, 0 },
681 { 2800, 1 },
682 { 3000, 2 },
683 { 3100, 3 },
684};
685
686static const struct menelaus_vtg vmmc_vtg = {
687 .name = "VMMC",
688 .vtg_reg = MENELAUS_LDO_CTRL1,
689 .vtg_shift = 6,
690 .vtg_bits = 2,
691 .mode_reg = MENELAUS_LDO_CTRL7,
692};
693
694int menelaus_set_vmmc(unsigned int mV)
695{
696 int val;
697
698 if (mV == 0)
699 return menelaus_set_voltage(&vmmc_vtg, 0, 0, 0);
700
701 val = menelaus_get_vtg_value(mV, vmmc_values, ARRAY_SIZE(vmmc_values));
702 if (val < 0)
703 return -EINVAL;
704 return menelaus_set_voltage(&vmmc_vtg, mV, val, 0x02);
705}
706EXPORT_SYMBOL(menelaus_set_vmmc);
707
708
709static const struct menelaus_vtg_value vaux_values[] = {
710 { 1500, 0 },
711 { 1800, 1 },
712 { 2500, 2 },
713 { 2800, 3 },
714};
715
716static const struct menelaus_vtg vaux_vtg = {
717 .name = "VAUX",
718 .vtg_reg = MENELAUS_LDO_CTRL1,
719 .vtg_shift = 4,
720 .vtg_bits = 2,
721 .mode_reg = MENELAUS_LDO_CTRL6,
722};
723
724int menelaus_set_vaux(unsigned int mV)
725{
726 int val;
727
728 if (mV == 0)
729 return menelaus_set_voltage(&vaux_vtg, 0, 0, 0);
730
731 val = menelaus_get_vtg_value(mV, vaux_values, ARRAY_SIZE(vaux_values));
732 if (val < 0)
733 return -EINVAL;
734 return menelaus_set_voltage(&vaux_vtg, mV, val, 0x02);
735}
736EXPORT_SYMBOL(menelaus_set_vaux);
737
738int menelaus_get_slot_pin_states(void)
739{
740 return menelaus_read_reg(MENELAUS_MCT_PIN_ST);
741}
742EXPORT_SYMBOL(menelaus_get_slot_pin_states);
743
744int menelaus_set_regulator_sleep(int enable, u32 val)
745{
746 int t, ret;
747 struct i2c_client *c = the_menelaus->client;
748
749 mutex_lock(&the_menelaus->lock);
750 ret = menelaus_write_reg(MENELAUS_SLEEP_CTRL2, val);
751 if (ret < 0)
752 goto out;
753
754 dev_dbg(&c->dev, "regulator sleep configuration: %02x\n", val);
755
756 ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
757 if (ret < 0)
758 goto out;
Jarkko Nikula1c888e22010-08-08 20:05:24 +0300759 t = (GPIO_CTRL_SLPCTLEN | GPIO3_DIR_INPUT);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700760 if (enable)
761 ret |= t;
762 else
763 ret &= ~t;
764 ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
765out:
766 mutex_unlock(&the_menelaus->lock);
767 return ret;
768}
769
770/*-----------------------------------------------------------------------*/
771
772/* Handles Menelaus interrupts. Does not run in interrupt context */
773static void menelaus_work(struct work_struct *_menelaus)
774{
775 struct menelaus_chip *menelaus =
776 container_of(_menelaus, struct menelaus_chip, work);
777 void (*handler)(struct menelaus_chip *menelaus);
778
779 while (1) {
780 unsigned isr;
781
782 isr = (menelaus_read_reg(MENELAUS_INT_STATUS2)
783 & ~menelaus->mask2) << 8;
784 isr |= menelaus_read_reg(MENELAUS_INT_STATUS1)
785 & ~menelaus->mask1;
786 if (!isr)
787 break;
788
789 while (isr) {
790 int irq = fls(isr) - 1;
791 isr &= ~(1 << irq);
792
793 mutex_lock(&menelaus->lock);
794 menelaus_disable_irq(irq);
795 menelaus_ack_irq(irq);
796 handler = menelaus->handlers[irq];
797 if (handler)
798 handler(menelaus);
799 menelaus_enable_irq(irq);
800 mutex_unlock(&menelaus->lock);
801 }
802 }
803 enable_irq(menelaus->client->irq);
804}
805
806/*
807 * We cannot use I2C in interrupt context, so we just schedule work.
808 */
809static irqreturn_t menelaus_irq(int irq, void *_menelaus)
810{
811 struct menelaus_chip *menelaus = _menelaus;
812
813 disable_irq_nosync(irq);
814 (void)schedule_work(&menelaus->work);
815
816 return IRQ_HANDLED;
817}
818
819/*-----------------------------------------------------------------------*/
820
821/*
822 * The RTC needs to be set once, then it runs on backup battery power.
823 * It supports alarms, including system wake alarms (from some modes);
824 * and 1/second IRQs if requested.
825 */
826#ifdef CONFIG_RTC_DRV_TWL92330
827
828#define RTC_CTRL_RTC_EN (1 << 0)
829#define RTC_CTRL_AL_EN (1 << 1)
830#define RTC_CTRL_MODE12 (1 << 2)
831#define RTC_CTRL_EVERY_MASK (3 << 3)
832#define RTC_CTRL_EVERY_SEC (0 << 3)
833#define RTC_CTRL_EVERY_MIN (1 << 3)
834#define RTC_CTRL_EVERY_HR (2 << 3)
835#define RTC_CTRL_EVERY_DAY (3 << 3)
836
837#define RTC_UPDATE_EVERY 0x08
838
839#define RTC_HR_PM (1 << 7)
840
841static void menelaus_to_time(char *regs, struct rtc_time *t)
842{
Adrian Bunke4d33962008-10-18 20:28:46 -0700843 t->tm_sec = bcd2bin(regs[0]);
844 t->tm_min = bcd2bin(regs[1]);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700845 if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
Adrian Bunke4d33962008-10-18 20:28:46 -0700846 t->tm_hour = bcd2bin(regs[2] & 0x1f) - 1;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700847 if (regs[2] & RTC_HR_PM)
848 t->tm_hour += 12;
849 } else
Adrian Bunke4d33962008-10-18 20:28:46 -0700850 t->tm_hour = bcd2bin(regs[2] & 0x3f);
851 t->tm_mday = bcd2bin(regs[3]);
852 t->tm_mon = bcd2bin(regs[4]) - 1;
853 t->tm_year = bcd2bin(regs[5]) + 100;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700854}
855
856static int time_to_menelaus(struct rtc_time *t, int regnum)
857{
858 int hour, status;
859
Adrian Bunke4d33962008-10-18 20:28:46 -0700860 status = menelaus_write_reg(regnum++, bin2bcd(t->tm_sec));
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700861 if (status < 0)
862 goto fail;
863
Adrian Bunke4d33962008-10-18 20:28:46 -0700864 status = menelaus_write_reg(regnum++, bin2bcd(t->tm_min));
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700865 if (status < 0)
866 goto fail;
867
868 if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
869 hour = t->tm_hour + 1;
870 if (hour > 12)
Adrian Bunke4d33962008-10-18 20:28:46 -0700871 hour = RTC_HR_PM | bin2bcd(hour - 12);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700872 else
Adrian Bunke4d33962008-10-18 20:28:46 -0700873 hour = bin2bcd(hour);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700874 } else
Adrian Bunke4d33962008-10-18 20:28:46 -0700875 hour = bin2bcd(t->tm_hour);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700876 status = menelaus_write_reg(regnum++, hour);
877 if (status < 0)
878 goto fail;
879
Adrian Bunke4d33962008-10-18 20:28:46 -0700880 status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mday));
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700881 if (status < 0)
882 goto fail;
883
Adrian Bunke4d33962008-10-18 20:28:46 -0700884 status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mon + 1));
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700885 if (status < 0)
886 goto fail;
887
Adrian Bunke4d33962008-10-18 20:28:46 -0700888 status = menelaus_write_reg(regnum++, bin2bcd(t->tm_year - 100));
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700889 if (status < 0)
890 goto fail;
891
892 return 0;
893fail:
894 dev_err(&the_menelaus->client->dev, "rtc write reg %02x, err %d\n",
895 --regnum, status);
896 return status;
897}
898
899static int menelaus_read_time(struct device *dev, struct rtc_time *t)
900{
901 struct i2c_msg msg[2];
902 char regs[7];
903 int status;
904
905 /* block read date and time registers */
906 regs[0] = MENELAUS_RTC_SEC;
907
908 msg[0].addr = MENELAUS_I2C_ADDRESS;
909 msg[0].flags = 0;
910 msg[0].len = 1;
911 msg[0].buf = regs;
912
913 msg[1].addr = MENELAUS_I2C_ADDRESS;
914 msg[1].flags = I2C_M_RD;
915 msg[1].len = sizeof(regs);
916 msg[1].buf = regs;
917
918 status = i2c_transfer(the_menelaus->client->adapter, msg, 2);
919 if (status != 2) {
920 dev_err(dev, "%s error %d\n", "read", status);
921 return -EIO;
922 }
923
924 menelaus_to_time(regs, t);
Adrian Bunke4d33962008-10-18 20:28:46 -0700925 t->tm_wday = bcd2bin(regs[6]);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700926
927 return 0;
928}
929
930static int menelaus_set_time(struct device *dev, struct rtc_time *t)
931{
932 int status;
933
934 /* write date and time registers */
935 status = time_to_menelaus(t, MENELAUS_RTC_SEC);
936 if (status < 0)
937 return status;
Adrian Bunke4d33962008-10-18 20:28:46 -0700938 status = menelaus_write_reg(MENELAUS_RTC_WKDAY, bin2bcd(t->tm_wday));
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700939 if (status < 0) {
David Brownellc1147cc2007-08-14 18:37:14 +0200940 dev_err(&the_menelaus->client->dev, "rtc write reg %02x "
Tony Lindgren0c4a59f2007-07-17 04:06:09 -0700941 "err %d\n", MENELAUS_RTC_WKDAY, status);
942 return status;
943 }
944
945 /* now commit the write */
946 status = menelaus_write_reg(MENELAUS_RTC_UPDATE, RTC_UPDATE_EVERY);
947 if (status < 0)
948 dev_err(&the_menelaus->client->dev, "rtc commit time, err %d\n",
949 status);
950
951 return 0;
952}
953
954static int menelaus_read_alarm(struct device *dev, struct rtc_wkalrm *w)
955{
956 struct i2c_msg msg[2];
957 char regs[6];
958 int status;
959
960 /* block read alarm registers */
961 regs[0] = MENELAUS_RTC_AL_SEC;
962
963 msg[0].addr = MENELAUS_I2C_ADDRESS;
964 msg[0].flags = 0;
965 msg[0].len = 1;
966 msg[0].buf = regs;
967
968 msg[1].addr = MENELAUS_I2C_ADDRESS;
969 msg[1].flags = I2C_M_RD;
970 msg[1].len = sizeof(regs);
971 msg[1].buf = regs;
972
973 status = i2c_transfer(the_menelaus->client->adapter, msg, 2);
974 if (status != 2) {
975 dev_err(dev, "%s error %d\n", "alarm read", status);
976 return -EIO;
977 }
978
979 menelaus_to_time(regs, &w->time);
980
981 w->enabled = !!(the_menelaus->rtc_control & RTC_CTRL_AL_EN);
982
983 /* NOTE we *could* check if actually pending... */
984 w->pending = 0;
985
986 return 0;
987}
988
989static int menelaus_set_alarm(struct device *dev, struct rtc_wkalrm *w)
990{
991 int status;
992
993 if (the_menelaus->client->irq <= 0 && w->enabled)
994 return -ENODEV;
995
996 /* clear previous alarm enable */
997 if (the_menelaus->rtc_control & RTC_CTRL_AL_EN) {
998 the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
999 status = menelaus_write_reg(MENELAUS_RTC_CTRL,
1000 the_menelaus->rtc_control);
1001 if (status < 0)
1002 return status;
1003 }
1004
1005 /* write alarm registers */
1006 status = time_to_menelaus(&w->time, MENELAUS_RTC_AL_SEC);
1007 if (status < 0)
1008 return status;
1009
1010 /* enable alarm if requested */
1011 if (w->enabled) {
1012 the_menelaus->rtc_control |= RTC_CTRL_AL_EN;
1013 status = menelaus_write_reg(MENELAUS_RTC_CTRL,
1014 the_menelaus->rtc_control);
1015 }
1016
1017 return status;
1018}
1019
1020#ifdef CONFIG_RTC_INTF_DEV
1021
1022static void menelaus_rtc_update_work(struct menelaus_chip *m)
1023{
1024 /* report 1/sec update */
1025 local_irq_disable();
1026 rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_UF);
1027 local_irq_enable();
1028}
1029
1030static int menelaus_ioctl(struct device *dev, unsigned cmd, unsigned long arg)
1031{
1032 int status;
1033
1034 if (the_menelaus->client->irq <= 0)
1035 return -ENOIOCTLCMD;
1036
1037 switch (cmd) {
1038 /* alarm IRQ */
1039 case RTC_AIE_ON:
1040 if (the_menelaus->rtc_control & RTC_CTRL_AL_EN)
1041 return 0;
1042 the_menelaus->rtc_control |= RTC_CTRL_AL_EN;
1043 break;
1044 case RTC_AIE_OFF:
1045 if (!(the_menelaus->rtc_control & RTC_CTRL_AL_EN))
1046 return 0;
1047 the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
1048 break;
1049 /* 1/second "update" IRQ */
1050 case RTC_UIE_ON:
1051 if (the_menelaus->uie)
1052 return 0;
1053 status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ);
1054 status = menelaus_add_irq_work(MENELAUS_RTCTMR_IRQ,
1055 menelaus_rtc_update_work);
1056 if (status == 0)
1057 the_menelaus->uie = 1;
1058 return status;
1059 case RTC_UIE_OFF:
1060 if (!the_menelaus->uie)
1061 return 0;
1062 status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ);
1063 if (status == 0)
1064 the_menelaus->uie = 0;
1065 return status;
1066 default:
1067 return -ENOIOCTLCMD;
1068 }
1069 return menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control);
1070}
1071
1072#else
1073#define menelaus_ioctl NULL
1074#endif
1075
1076/* REVISIT no compensation register support ... */
1077
1078static const struct rtc_class_ops menelaus_rtc_ops = {
1079 .ioctl = menelaus_ioctl,
1080 .read_time = menelaus_read_time,
1081 .set_time = menelaus_set_time,
1082 .read_alarm = menelaus_read_alarm,
1083 .set_alarm = menelaus_set_alarm,
1084};
1085
1086static void menelaus_rtc_alarm_work(struct menelaus_chip *m)
1087{
1088 /* report alarm */
1089 local_irq_disable();
1090 rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_AF);
1091 local_irq_enable();
1092
1093 /* then disable it; alarms are oneshot */
1094 the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
1095 menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control);
1096}
1097
1098static inline void menelaus_rtc_init(struct menelaus_chip *m)
1099{
1100 int alarm = (m->client->irq > 0);
1101
1102 /* assume 32KDETEN pin is pulled high */
1103 if (!(menelaus_read_reg(MENELAUS_OSC_CTRL) & 0x80)) {
1104 dev_dbg(&m->client->dev, "no 32k oscillator\n");
1105 return;
1106 }
1107
1108 /* support RTC alarm; it can issue wakeups */
1109 if (alarm) {
1110 if (menelaus_add_irq_work(MENELAUS_RTCALM_IRQ,
1111 menelaus_rtc_alarm_work) < 0) {
1112 dev_err(&m->client->dev, "can't handle RTC alarm\n");
1113 return;
1114 }
1115 device_init_wakeup(&m->client->dev, 1);
1116 }
1117
1118 /* be sure RTC is enabled; allow 1/sec irqs; leave 12hr mode alone */
1119 m->rtc_control = menelaus_read_reg(MENELAUS_RTC_CTRL);
1120 if (!(m->rtc_control & RTC_CTRL_RTC_EN)
1121 || (m->rtc_control & RTC_CTRL_AL_EN)
1122 || (m->rtc_control & RTC_CTRL_EVERY_MASK)) {
1123 if (!(m->rtc_control & RTC_CTRL_RTC_EN)) {
1124 dev_warn(&m->client->dev, "rtc clock needs setting\n");
1125 m->rtc_control |= RTC_CTRL_RTC_EN;
1126 }
1127 m->rtc_control &= ~RTC_CTRL_EVERY_MASK;
1128 m->rtc_control &= ~RTC_CTRL_AL_EN;
1129 menelaus_write_reg(MENELAUS_RTC_CTRL, m->rtc_control);
1130 }
1131
1132 m->rtc = rtc_device_register(DRIVER_NAME,
1133 &m->client->dev,
1134 &menelaus_rtc_ops, THIS_MODULE);
1135 if (IS_ERR(m->rtc)) {
1136 if (alarm) {
1137 menelaus_remove_irq_work(MENELAUS_RTCALM_IRQ);
1138 device_init_wakeup(&m->client->dev, 0);
1139 }
1140 dev_err(&m->client->dev, "can't register RTC: %d\n",
1141 (int) PTR_ERR(m->rtc));
1142 the_menelaus->rtc = NULL;
1143 }
1144}
1145
1146#else
1147
1148static inline void menelaus_rtc_init(struct menelaus_chip *m)
1149{
1150 /* nothing */
1151}
1152
1153#endif
1154
1155/*-----------------------------------------------------------------------*/
1156
1157static struct i2c_driver menelaus_i2c_driver;
1158
Jean Delvared2653e92008-04-29 23:11:39 +02001159static int menelaus_probe(struct i2c_client *client,
1160 const struct i2c_device_id *id)
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001161{
1162 struct menelaus_chip *menelaus;
Julia Lawall42a71ef2014-08-21 07:06:06 -05001163 int rev = 0;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001164 int err = 0;
1165 struct menelaus_platform_data *menelaus_pdata =
Jingoo Han334a41c2013-07-30 17:10:05 +09001166 dev_get_platdata(&client->dev);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001167
1168 if (the_menelaus) {
1169 dev_dbg(&client->dev, "only one %s for now\n",
1170 DRIVER_NAME);
1171 return -ENODEV;
1172 }
1173
Jingoo Han7a404312013-08-20 16:05:11 +09001174 menelaus = devm_kzalloc(&client->dev, sizeof(*menelaus), GFP_KERNEL);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001175 if (!menelaus)
1176 return -ENOMEM;
1177
1178 i2c_set_clientdata(client, menelaus);
1179
1180 the_menelaus = menelaus;
1181 menelaus->client = client;
1182
1183 /* If a true probe check the device */
1184 rev = menelaus_read_reg(MENELAUS_REV);
1185 if (rev < 0) {
Emil Medve1f7c8232007-10-16 23:29:48 -07001186 pr_err(DRIVER_NAME ": device not found");
Jingoo Han7a404312013-08-20 16:05:11 +09001187 return -ENODEV;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001188 }
1189
1190 /* Ack and disable all Menelaus interrupts */
1191 menelaus_write_reg(MENELAUS_INT_ACK1, 0xff);
1192 menelaus_write_reg(MENELAUS_INT_ACK2, 0xff);
1193 menelaus_write_reg(MENELAUS_INT_MASK1, 0xff);
1194 menelaus_write_reg(MENELAUS_INT_MASK2, 0xff);
1195 menelaus->mask1 = 0xff;
1196 menelaus->mask2 = 0xff;
1197
1198 /* Set output buffer strengths */
1199 menelaus_write_reg(MENELAUS_MCT_CTRL1, 0x73);
1200
1201 if (client->irq > 0) {
Yong Zhangf742b96e2011-09-15 21:52:09 +02001202 err = request_irq(client->irq, menelaus_irq, 0,
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001203 DRIVER_NAME, menelaus);
1204 if (err) {
Joe Perches898eb712007-10-18 03:06:30 -07001205 dev_dbg(&client->dev, "can't get IRQ %d, err %d\n",
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001206 client->irq, err);
Jingoo Han7a404312013-08-20 16:05:11 +09001207 return err;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001208 }
1209 }
1210
1211 mutex_init(&menelaus->lock);
1212 INIT_WORK(&menelaus->work, menelaus_work);
1213
1214 pr_info("Menelaus rev %d.%d\n", rev >> 4, rev & 0x0f);
1215
Julia Lawall42a71ef2014-08-21 07:06:06 -05001216 err = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
1217 if (err < 0)
Jingoo Han7a404312013-08-20 16:05:11 +09001218 goto fail;
Aaro Koskinendfe514b2015-03-28 22:45:37 +02001219 if (err & VCORE_CTRL1_HW_NSW)
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001220 menelaus->vcore_hw_mode = 1;
1221 else
1222 menelaus->vcore_hw_mode = 0;
1223
1224 if (menelaus_pdata != NULL && menelaus_pdata->late_init != NULL) {
1225 err = menelaus_pdata->late_init(&client->dev);
1226 if (err < 0)
Jingoo Han7a404312013-08-20 16:05:11 +09001227 goto fail;
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001228 }
1229
1230 menelaus_rtc_init(menelaus);
1231
1232 return 0;
Jingoo Han7a404312013-08-20 16:05:11 +09001233fail:
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001234 free_irq(client->irq, menelaus);
Tejun Heo43829732012-08-20 14:51:24 -07001235 flush_work(&menelaus->work);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001236 return err;
1237}
1238
Dmitry Torokhoveac8a5c2015-03-09 10:49:36 -07001239static int menelaus_remove(struct i2c_client *client)
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001240{
1241 struct menelaus_chip *menelaus = i2c_get_clientdata(client);
1242
1243 free_irq(client->irq, menelaus);
Tejun Heo43829732012-08-20 14:51:24 -07001244 flush_work(&menelaus->work);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001245 the_menelaus = NULL;
1246 return 0;
1247}
1248
Jean Delvare3760f732008-04-29 23:11:40 +02001249static const struct i2c_device_id menelaus_id[] = {
1250 { "menelaus", 0 },
1251 { }
1252};
1253MODULE_DEVICE_TABLE(i2c, menelaus_id);
1254
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001255static struct i2c_driver menelaus_i2c_driver = {
1256 .driver = {
1257 .name = DRIVER_NAME,
1258 },
1259 .probe = menelaus_probe,
Dmitry Torokhoveac8a5c2015-03-09 10:49:36 -07001260 .remove = menelaus_remove,
Jean Delvare3760f732008-04-29 23:11:40 +02001261 .id_table = menelaus_id,
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001262};
1263
Sachin Kamat1d3c7f52014-05-29 17:13:22 +05301264module_i2c_driver(menelaus_i2c_driver);
Tony Lindgren0c4a59f2007-07-17 04:06:09 -07001265
1266MODULE_AUTHOR("Texas Instruments, Inc. (and others)");
1267MODULE_DESCRIPTION("I2C interface for Menelaus.");
1268MODULE_LICENSE("GPL");