blob: 2d3d1e04ba92549e0b7350e8be685ef566d1abcf [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
2 * linux/include/linux/cyclades.h
3 *
4 * This file was initially written by
5 * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
6 * Ivan Passos <ivan@cyclades.com>.
7 *
8 * This file contains the general definitions for the cyclades.c driver
9 *$Log: cyclades.h,v $
10 *Revision 3.1 2002/01/29 11:36:16 henrique
11 *added throttle field on struct cyclades_port to indicate whether the
12 *port is throttled or not
13 *
14 *Revision 3.1 2000/04/19 18:52:52 ivan
15 *converted address fields to unsigned long and added fields for physical
16 *addresses on cyclades_card structure;
17 *
18 *Revision 3.0 1998/11/02 14:20:59 ivan
19 *added nports field on cyclades_card structure;
20 *
21 *Revision 2.5 1998/08/03 16:57:01 ivan
22 *added cyclades_idle_stats structure;
23 *
24 *Revision 2.4 1998/06/01 12:09:53 ivan
25 *removed closing_wait2 from cyclades_port structure;
26 *
27 *Revision 2.3 1998/03/16 18:01:12 ivan
28 *changes in the cyclades_port structure to get it closer to the
29 *standard serial port structure;
30 *added constants for new ioctls;
31 *
32 *Revision 2.2 1998/02/17 16:50:00 ivan
33 *changes in the cyclades_port structure (addition of shutdown_wait and
34 *chip_rev variables);
35 *added constants for new ioctls and for CD1400 rev. numbers.
36 *
37 *Revision 2.1 1997/10/24 16:03:00 ivan
38 *added rflow (which allows enabling the CD1400 special flow control
39 *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to
40 *cyclades_port structure;
41 *added Alpha support
42 *
43 *Revision 2.0 1997/06/30 10:30:00 ivan
44 *added some new doorbell command constants related to IOCTLW and
45 *UART error signaling
46 *
47 *Revision 1.8 1997/06/03 15:30:00 ivan
48 *added constant ZFIRM_HLT
49 *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
50 *
51 *Revision 1.7 1997/03/26 10:30:00 daniel
52 *new entries at the end of cyclades_port struct to reallocate
53 *variables illegally allocated within card memory.
54 *
55 *Revision 1.6 1996/09/09 18:35:30 bentson
56 *fold in changes for Cyclom-Z -- including structures for
57 *communicating with board as well modest changes to original
58 *structures to support new features.
59 *
60 *Revision 1.5 1995/11/13 21:13:31 bentson
61 *changes suggested by Michael Chastain <mec@duracef.shout.net>
62 *to support use of this file in non-kernel applications
63 *
64 *
65 */
66
67#ifndef _LINUX_CYCLADES_H
68#define _LINUX_CYCLADES_H
69
Klaus Kudielka1a86b5e2007-05-08 00:26:26 -070070#include <linux/types.h>
71
Linus Torvalds1da177e2005-04-16 15:20:36 -070072struct cyclades_monitor {
73 unsigned long int_count;
74 unsigned long char_count;
75 unsigned long char_max;
76 unsigned long char_last;
77};
78
79/*
80 * These stats all reflect activity since the device was last initialized.
81 * (i.e., since the port was opened with no other processes already having it
82 * open)
83 */
84struct cyclades_idle_stats {
85 time_t in_use; /* Time device has been in use (secs) */
86 time_t recv_idle; /* Time since last char received (secs) */
87 time_t xmit_idle; /* Time since last char transmitted (secs) */
88 unsigned long recv_bytes; /* Bytes received */
89 unsigned long xmit_bytes; /* Bytes transmitted */
90 unsigned long overruns; /* Input overruns */
91 unsigned long frame_errs; /* Input framing errors */
92 unsigned long parity_errs; /* Input parity errors */
93};
94
95#define CYCLADES_MAGIC 0x4359
96
97#define CYGETMON 0x435901
98#define CYGETTHRESH 0x435902
99#define CYSETTHRESH 0x435903
100#define CYGETDEFTHRESH 0x435904
101#define CYSETDEFTHRESH 0x435905
102#define CYGETTIMEOUT 0x435906
103#define CYSETTIMEOUT 0x435907
104#define CYGETDEFTIMEOUT 0x435908
105#define CYSETDEFTIMEOUT 0x435909
106#define CYSETRFLOW 0x43590a
107#define CYGETRFLOW 0x43590b
108#define CYSETRTSDTR_INV 0x43590c
109#define CYGETRTSDTR_INV 0x43590d
110#define CYZSETPOLLCYCLE 0x43590e
111#define CYZGETPOLLCYCLE 0x43590f
112#define CYGETCD1400VER 0x435910
Linus Torvalds1da177e2005-04-16 15:20:36 -0700113#define CYSETWAIT 0x435912
114#define CYGETWAIT 0x435913
115
116/*************** CYCLOM-Z ADDITIONS ***************/
117
118#define CZIOC ('M' << 8)
119#define CZ_NBOARDS (CZIOC|0xfa)
120#define CZ_BOOT_START (CZIOC|0xfb)
121#define CZ_BOOT_DATA (CZIOC|0xfc)
122#define CZ_BOOT_END (CZIOC|0xfd)
123#define CZ_TEST (CZIOC|0xfe)
124
125#define CZ_DEF_POLL (HZ/25)
126
127#define MAX_BOARD 4 /* Max number of boards */
128#define MAX_DEV 256 /* Max number of ports total */
129#define CYZ_MAX_SPEED 921600
130
131#define CYZ_FIFO_SIZE 16
132
133#define CYZ_BOOT_NWORDS 0x100
134struct CYZ_BOOT_CTRL {
135 unsigned short nboard;
136 int status[MAX_BOARD];
137 int nchannel[MAX_BOARD];
138 int fw_rev[MAX_BOARD];
139 unsigned long offset;
140 unsigned long data[CYZ_BOOT_NWORDS];
141};
142
143
144#ifndef DP_WINDOW_SIZE
145/* #include "cyclomz.h" */
146/****************** ****************** *******************/
147/*
148 * The data types defined below are used in all ZFIRM interface
149 * data structures. They accomodate differences between HW
150 * architectures and compilers.
151 */
152
Klaus Kudielka7c4e95b2007-05-08 00:26:25 -0700153#include <asm/types.h>
154
155typedef __u64 ucdouble; /* 64 bits, unsigned */
156typedef __u32 uclong; /* 32 bits, unsigned */
157typedef __u16 ucshort; /* 16 bits, unsigned */
158typedef __u8 ucchar; /* 8 bits, unsigned */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700159
160/*
161 * Memory Window Sizes
162 */
163
164#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */
165#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and
166 8Zo V.2 */
167#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */
168
169/*
170 * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
171 * normally will access only interested on the fpga_id, fpga_version,
172 * start_cpu and stop_cpu.
173 */
174
175struct CUSTOM_REG {
Klaus Kudielka1a86b5e2007-05-08 00:26:26 -0700176 __u32 fpga_id; /* FPGA Identification Register */
177 __u32 fpga_version; /* FPGA Version Number Register */
178 __u32 cpu_start; /* CPU start Register (write) */
179 __u32 cpu_stop; /* CPU stop Register (write) */
Joe Perchesfd3f8982008-02-03 17:45:46 +0200180 __u32 misc_reg; /* Miscellaneous Register */
Klaus Kudielka1a86b5e2007-05-08 00:26:26 -0700181 __u32 idt_mode; /* IDT mode Register */
182 __u32 uart_irq_status; /* UART IRQ status Register */
183 __u32 clear_timer0_irq; /* Clear timer interrupt Register */
184 __u32 clear_timer1_irq; /* Clear timer interrupt Register */
185 __u32 clear_timer2_irq; /* Clear timer interrupt Register */
186 __u32 test_register; /* Test Register */
187 __u32 test_count; /* Test Count Register */
188 __u32 timer_select; /* Timer select register */
189 __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
190 __u32 ram_wait_state; /* RAM wait-state Register */
191 __u32 uart_wait_state; /* UART wait-state Register */
192 __u32 timer_wait_state; /* timer wait-state Register */
193 __u32 ack_wait_state; /* ACK wait State Register */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700194};
195
196/*
197 * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
198 * registers. This structure can be used to access the 9060 registers
199 * (memory mapped).
200 */
201
202struct RUNTIME_9060 {
Klaus Kudielka1a86b5e2007-05-08 00:26:26 -0700203 __u32 loc_addr_range; /* 00h - Local Address Range */
204 __u32 loc_addr_base; /* 04h - Local Address Base */
205 __u32 loc_arbitr; /* 08h - Local Arbitration */
206 __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */
207 __u32 loc_rom_range; /* 10h - Local ROM Range */
208 __u32 loc_rom_base; /* 14h - Local ROM Base */
209 __u32 loc_bus_descr; /* 18h - Local Bus descriptor */
210 __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */
211 __u32 loc_base_mst; /* 20h - Local Base for Master PCI */
212 __u32 loc_range_io; /* 24h - Local Range for Master IO */
213 __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */
214 __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */
215 __u32 filler1; /* 30h */
216 __u32 filler2; /* 34h */
217 __u32 filler3; /* 38h */
218 __u32 filler4; /* 3Ch */
219 __u32 mail_box_0; /* 40h - Mail Box 0 */
220 __u32 mail_box_1; /* 44h - Mail Box 1 */
221 __u32 mail_box_2; /* 48h - Mail Box 2 */
222 __u32 mail_box_3; /* 4Ch - Mail Box 3 */
223 __u32 filler5; /* 50h */
224 __u32 filler6; /* 54h */
225 __u32 filler7; /* 58h */
226 __u32 filler8; /* 5Ch */
227 __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */
228 __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */
229 __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */
230 __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700231};
232
233/* Values for the Local Base Address re-map register */
234
235#define WIN_RAM 0x00000001L /* set the sliding window to RAM */
236#define WIN_CREG 0x14000001L /* set the window to custom Registers */
237
238/* Values timer select registers */
239
240#define TIMER_BY_1M 0x00 /* clock divided by 1M */
241#define TIMER_BY_256K 0x01 /* clock divided by 256k */
242#define TIMER_BY_128K 0x02 /* clock divided by 128k */
243#define TIMER_BY_32K 0x03 /* clock divided by 32k */
244
245/****************** ****************** *******************/
246#endif
247
248#ifndef ZFIRM_ID
249/* #include "zfwint.h" */
250/****************** ****************** *******************/
251/*
252 * This file contains the definitions for interfacing with the
253 * Cyclom-Z ZFIRM Firmware.
254 */
255
256/* General Constant definitions */
257
258#define MAX_CHAN 64 /* max number of channels per board */
259
260/* firmware id structure (set after boot) */
261
262#define ID_ADDRESS 0x00000180L /* signature/pointer address */
263#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */
264#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */
265#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */
266
267#define ZF_TINACT_DEF 1000 /* default inactivity timeout
268 (1000 ms) */
269#define ZF_TINACT ZF_TINACT_DEF
270
271struct FIRM_ID {
Klaus Kudielka1a86b5e2007-05-08 00:26:26 -0700272 __u32 signature; /* ZFIRM/U signature */
273 __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700274};
275
276/* Op. System id */
277
278#define C_OS_LINUX 0x00000030 /* generic Linux system */
279
280/* channel op_mode */
281
282#define C_CH_DISABLE 0x00000000 /* channel is disabled */
283#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */
284#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */
285#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */
286#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */
287
288/* comm_parity - parity */
289
290#define C_PR_NONE 0x00000000 /* None */
291#define C_PR_ODD 0x00000001 /* Odd */
292#define C_PR_EVEN 0x00000002 /* Even */
293#define C_PR_MARK 0x00000004 /* Mark */
294#define C_PR_SPACE 0x00000008 /* Space */
295#define C_PR_PARITY 0x000000ff
296
297#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */
298#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */
299
300/* comm_data_l - data length and stop bits */
301
302#define C_DL_CS5 0x00000001
303#define C_DL_CS6 0x00000002
304#define C_DL_CS7 0x00000004
305#define C_DL_CS8 0x00000008
306#define C_DL_CS 0x0000000f
307#define C_DL_1STOP 0x00000010
308#define C_DL_15STOP 0x00000020
309#define C_DL_2STOP 0x00000040
310#define C_DL_STOP 0x000000f0
311
312/* interrupt enabling/status */
313
314#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */
315#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */
316#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */
317#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */
318#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */
319#define C_IN_MDCD 0x00000100 /* modem DCD change */
320#define C_IN_MDSR 0x00000200 /* modem DSR change */
321#define C_IN_MRI 0x00000400 /* modem RI change */
322#define C_IN_MCTS 0x00000800 /* modem CTS change */
323#define C_IN_RXBRK 0x00001000 /* Break received */
324#define C_IN_PR_ERROR 0x00002000 /* parity error */
325#define C_IN_FR_ERROR 0x00004000 /* frame error */
326#define C_IN_OVR_ERROR 0x00008000 /* overrun error */
327#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */
328#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */
329#define C_IN_MRTS 0x00040000 /* modem RTS drop */
330#define C_IN_ICHAR 0x00080000
331
332/* flow control */
333
334#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */
335#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */
336#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */
337#define C_FL_SWFLOW 0x0000000f
338
339/* flow status */
340
341#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */
342#define C_FS_SENDING 0x00000001 /* UART is sending data */
343#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */
344
345/* rs_control/rs_status RS-232 signals */
346
347#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in
348 IOCTLM command */
349#define C_RS_RTS 0x00000001 /* RTS */
350#define C_RS_DTR 0x00000004 /* DTR */
351#define C_RS_DCD 0x00000100 /* CD */
352#define C_RS_DSR 0x00000200 /* DSR */
353#define C_RS_RI 0x00000400 /* RI */
354#define C_RS_CTS 0x00000800 /* CTS */
355
356/* commands Host <-> Board */
357
358#define C_CM_RESET 0x01 /* reset/flush buffers */
359#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */
360#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */
361#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */
362#define C_CM_SENDXOFF 0x10 /* send Xoff */
363#define C_CM_SENDXON 0x11 /* send Xon */
364#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */
365#define C_CM_SENDBRK 0x41 /* send break */
366#define C_CM_INTBACK 0x42 /* Interrupt back */
367#define C_CM_SET_BREAK 0x43 /* Tx break on */
368#define C_CM_CLR_BREAK 0x44 /* Tx break off */
369#define C_CM_CMD_DONE 0x45 /* Previous command done */
370#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */
371#define C_CM_TINACT 0x51 /* set inactivity detection */
372#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */
373#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */
374#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */
375#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */
376#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */
377#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */
378#define C_CM_Q_ENABLE 0x58 /* enables queue access from the
379 driver */
380#define C_CM_Q_DISABLE 0x59 /* disables queue access from the
381 driver */
382
383#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */
384#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */
385#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */
386#define C_CM_RXNNDT 0x63 /* rx no new data timeout */
387#define C_CM_TXFEMPTY 0x64
388#define C_CM_ICHAR 0x65
389#define C_CM_MDCD 0x70 /* modem DCD change */
390#define C_CM_MDSR 0x71 /* modem DSR change */
391#define C_CM_MRI 0x72 /* modem RI change */
392#define C_CM_MCTS 0x73 /* modem CTS change */
393#define C_CM_MRTS 0x74 /* modem RTS drop */
394#define C_CM_RXBRK 0x84 /* Break received */
395#define C_CM_PR_ERROR 0x85 /* Parity error */
396#define C_CM_FR_ERROR 0x86 /* Frame error */
397#define C_CM_OVR_ERROR 0x87 /* Overrun error */
398#define C_CM_RXOFL 0x88 /* RX buffer overflow */
399#define C_CM_CMDERROR 0x90 /* command error */
400#define C_CM_FATAL 0x91 /* fatal error */
401#define C_CM_HW_RESET 0x92 /* reset board */
402
403/*
404 * CH_CTRL - This per port structure contains all parameters
405 * that control an specific port. It can be seen as the
406 * configuration registers of a "super-serial-controller".
407 */
408
409struct CH_CTRL {
Klaus Kudielka1a86b5e2007-05-08 00:26:26 -0700410 __u32 op_mode; /* operation mode */
411 __u32 intr_enable; /* interrupt masking */
412 __u32 sw_flow; /* SW flow control */
413 __u32 flow_status; /* output flow status */
414 __u32 comm_baud; /* baud rate - numerically specified */
415 __u32 comm_parity; /* parity */
416 __u32 comm_data_l; /* data length/stop */
417 __u32 comm_flags; /* other flags */
418 __u32 hw_flow; /* HW flow control */
419 __u32 rs_control; /* RS-232 outputs */
420 __u32 rs_status; /* RS-232 inputs */
421 __u32 flow_xon; /* xon char */
422 __u32 flow_xoff; /* xoff char */
423 __u32 hw_overflow; /* hw overflow counter */
424 __u32 sw_overflow; /* sw overflow counter */
425 __u32 comm_error; /* frame/parity error counter */
426 __u32 ichar;
427 __u32 filler[7];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700428};
429
430
431/*
432 * BUF_CTRL - This per channel structure contains
433 * all Tx and Rx buffer control for a given channel.
434 */
435
436struct BUF_CTRL {
Klaus Kudielka1a86b5e2007-05-08 00:26:26 -0700437 __u32 flag_dma; /* buffers are in Host memory */
438 __u32 tx_bufaddr; /* address of the tx buffer */
439 __u32 tx_bufsize; /* tx buffer size */
440 __u32 tx_threshold; /* tx low water mark */
441 __u32 tx_get; /* tail index tx buf */
442 __u32 tx_put; /* head index tx buf */
443 __u32 rx_bufaddr; /* address of the rx buffer */
444 __u32 rx_bufsize; /* rx buffer size */
445 __u32 rx_threshold; /* rx high water mark */
446 __u32 rx_get; /* tail index rx buf */
447 __u32 rx_put; /* head index rx buf */
448 __u32 filler[5]; /* filler to align structures */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700449};
450
451/*
452 * BOARD_CTRL - This per board structure contains all global
453 * control fields related to the board.
454 */
455
456struct BOARD_CTRL {
457
458 /* static info provided by the on-board CPU */
Klaus Kudielka1a86b5e2007-05-08 00:26:26 -0700459 __u32 n_channel; /* number of channels */
460 __u32 fw_version; /* firmware version */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700461
462 /* static info provided by the driver */
Klaus Kudielka1a86b5e2007-05-08 00:26:26 -0700463 __u32 op_system; /* op_system id */
464 __u32 dr_version; /* driver version */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700465
466 /* board control area */
Klaus Kudielka1a86b5e2007-05-08 00:26:26 -0700467 __u32 inactivity; /* inactivity control */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700468
469 /* host to FW commands */
Klaus Kudielka1a86b5e2007-05-08 00:26:26 -0700470 __u32 hcmd_channel; /* channel number */
471 __u32 hcmd_param; /* pointer to parameters */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700472
473 /* FW to Host commands */
Klaus Kudielka1a86b5e2007-05-08 00:26:26 -0700474 __u32 fwcmd_channel; /* channel number */
475 __u32 fwcmd_param; /* pointer to parameters */
476 __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700477
478 /* filler so the structures are aligned */
Klaus Kudielka1a86b5e2007-05-08 00:26:26 -0700479 __u32 filler[6];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700480};
481
482/* Host Interrupt Queue */
483
484#define QUEUE_SIZE (10*MAX_CHAN)
485
486struct INT_QUEUE {
487 unsigned char intr_code[QUEUE_SIZE];
488 unsigned long channel[QUEUE_SIZE];
489 unsigned long param[QUEUE_SIZE];
490 unsigned long put;
491 unsigned long get;
492};
493
494/*
495 * ZFW_CTRL - This is the data structure that includes all other
496 * data structures used by the Firmware.
497 */
498
499struct ZFW_CTRL {
500 struct BOARD_CTRL board_ctrl;
501 struct CH_CTRL ch_ctrl[MAX_CHAN];
502 struct BUF_CTRL buf_ctrl[MAX_CHAN];
503};
504
505/****************** ****************** *******************/
506#endif
507
Jiri Slabyb81cc3102007-05-08 00:36:38 -0700508#ifdef __KERNEL__
509
Linus Torvalds1da177e2005-04-16 15:20:36 -0700510/* Per card data structure */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700511struct cyclades_card {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700512 void __iomem *base_addr;
513 void __iomem *ctl_addr;
514 int irq;
Jiri Slaby65f76a82007-10-18 03:06:22 -0700515 unsigned int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */
516 unsigned int first_line; /* minor number of first channel on card */
517 unsigned int nports; /* Number of ports in the card */
518 int bus_index; /* address shift - 0 for ISA, 1 for PCI */
519 int intr_enabled; /* FW Interrupt flag - 0 disabled, 1 enabled */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700520 spinlock_t card_lock;
Jiri Slabydd025c02007-05-08 00:37:02 -0700521 struct cyclades_port *ports;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700522};
523
Linus Torvalds1da177e2005-04-16 15:20:36 -0700524/***************************************
525 * Memory access functions/macros *
526 * (required to support Alpha systems) *
527 ***************************************/
528
Jiri Slabydb05c3b2007-05-08 00:35:46 -0700529#define cy_writeb(port,val) do { writeb((val), (port)); mb(); } while (0)
530#define cy_writew(port,val) do { writew((val), (port)); mb(); } while (0)
531#define cy_writel(port,val) do { writel((val), (port)); mb(); } while (0)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700532
533/*
534 * Statistics counters
535 */
536struct cyclades_icount {
537 __u32 cts, dsr, rng, dcd, tx, rx;
538 __u32 frame, parity, overrun, brk;
539 __u32 buf_overrun;
540};
541
542/*
543 * This is our internal structure for each serial port's state.
544 *
545 * Many fields are paralleled by the structure used by the serial_struct
546 * structure.
547 *
548 * For definitions of the flags field, see tty.h
549 */
550
551struct cyclades_port {
552 int magic;
Alan Cox77451e52008-07-16 21:57:02 +0100553 struct tty_port port;
Jiri Slaby875b2062007-05-08 00:36:49 -0700554 struct cyclades_card *card;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700555 int line;
556 int flags; /* defined in tty.h */
557 int type; /* UART type */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700558 int read_status_mask;
559 int ignore_status_mask;
560 int timeout;
561 int xmit_fifo_size;
562 int cor1,cor2,cor3,cor4,cor5;
563 int tbpr,tco,rbpr,rco;
564 int baud;
565 int rflow;
566 int rtsdtr_inv;
567 int chip_rev;
568 int custom_divisor;
Jiri Slaby65f76a82007-10-18 03:06:22 -0700569 u8 x_char; /* to be pushed out ASAP */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700570 int breakon;
571 int breakoff;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700572 int xmit_head;
573 int xmit_tail;
574 int xmit_cnt;
575 int default_threshold;
576 int default_timeout;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700577 unsigned long rflush_count;
578 struct cyclades_monitor mon;
579 struct cyclades_idle_stats idle_stats;
580 struct cyclades_icount icount;
Jiri Slaby2c7fea92007-05-08 00:36:51 -0700581 struct completion shutdown_wait;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700582 wait_queue_head_t delta_msr_wait;
583 int throttle;
584};
585
Linus Torvalds1da177e2005-04-16 15:20:36 -0700586#define CLOSING_WAIT_DELAY 30*HZ
Alan Cox44b7d1b2008-07-16 21:57:18 +0100587#define CY_CLOSING_WAIT_NONE ASYNC_CLOSING_WAIT_NONE
588#define CY_CLOSING_WAIT_INF ASYNC_CLOSING_WAIT_INF
Linus Torvalds1da177e2005-04-16 15:20:36 -0700589
590
591#define CyMAX_CHIPS_PER_CARD 8
592#define CyMAX_CHAR_FIFO 12
593#define CyPORTS_PER_CHIP 4
594#define CD1400_MAX_SPEED 115200
595
596#define CyISA_Ywin 0x2000
597
598#define CyPCI_Ywin 0x4000
599#define CyPCI_Yctl 0x80
600#define CyPCI_Zctl CTRL_WINDOW_SIZE
601#define CyPCI_Zwin 0x80000
602#define CyPCI_Ze_win (2 * CyPCI_Zwin)
603
604#define PCI_DEVICE_ID_MASK 0x06
605
606/**** CD1400 registers ****/
607
608#define CD1400_REV_G 0x46
609#define CD1400_REV_J 0x48
610
611#define CyRegSize 0x0400
612#define Cy_HwReset 0x1400
613#define Cy_ClrIntr 0x1800
614#define Cy_EpldRev 0x1e00
615
616/* Global Registers */
617
618#define CyGFRCR (0x40*2)
619#define CyRevE (44)
620#define CyCAR (0x68*2)
621#define CyCHAN_0 (0x00)
622#define CyCHAN_1 (0x01)
623#define CyCHAN_2 (0x02)
624#define CyCHAN_3 (0x03)
625#define CyGCR (0x4B*2)
626#define CyCH0_SERIAL (0x00)
627#define CyCH0_PARALLEL (0x80)
628#define CySVRR (0x67*2)
629#define CySRModem (0x04)
630#define CySRTransmit (0x02)
631#define CySRReceive (0x01)
632#define CyRICR (0x44*2)
633#define CyTICR (0x45*2)
634#define CyMICR (0x46*2)
635#define CyICR0 (0x00)
636#define CyICR1 (0x01)
637#define CyICR2 (0x02)
638#define CyICR3 (0x03)
639#define CyRIR (0x6B*2)
640#define CyTIR (0x6A*2)
641#define CyMIR (0x69*2)
642#define CyIRDirEq (0x80)
643#define CyIRBusy (0x40)
644#define CyIRUnfair (0x20)
645#define CyIRContext (0x1C)
646#define CyIRChannel (0x03)
647#define CyPPR (0x7E*2)
648#define CyCLOCK_20_1MS (0x27)
649#define CyCLOCK_25_1MS (0x31)
650#define CyCLOCK_25_5MS (0xf4)
651#define CyCLOCK_60_1MS (0x75)
652#define CyCLOCK_60_2MS (0xea)
653
654/* Virtual Registers */
655
656#define CyRIVR (0x43*2)
657#define CyTIVR (0x42*2)
658#define CyMIVR (0x41*2)
659#define CyIVRMask (0x07)
660#define CyIVRRxEx (0x07)
661#define CyIVRRxOK (0x03)
662#define CyIVRTxOK (0x02)
663#define CyIVRMdmOK (0x01)
664#define CyTDR (0x63*2)
665#define CyRDSR (0x62*2)
666#define CyTIMEOUT (0x80)
667#define CySPECHAR (0x70)
668#define CyBREAK (0x08)
669#define CyPARITY (0x04)
670#define CyFRAME (0x02)
671#define CyOVERRUN (0x01)
672#define CyMISR (0x4C*2)
673/* see CyMCOR_ and CyMSVR_ for bits*/
674#define CyEOSRR (0x60*2)
675
676/* Channel Registers */
677
678#define CyLIVR (0x18*2)
679#define CyMscsr (0x01)
680#define CyTdsr (0x02)
681#define CyRgdsr (0x03)
682#define CyRedsr (0x07)
683#define CyCCR (0x05*2)
684/* Format 1 */
685#define CyCHAN_RESET (0x80)
686#define CyCHIP_RESET (0x81)
687#define CyFlushTransFIFO (0x82)
688/* Format 2 */
689#define CyCOR_CHANGE (0x40)
690#define CyCOR1ch (0x02)
691#define CyCOR2ch (0x04)
692#define CyCOR3ch (0x08)
693/* Format 3 */
694#define CySEND_SPEC_1 (0x21)
695#define CySEND_SPEC_2 (0x22)
696#define CySEND_SPEC_3 (0x23)
697#define CySEND_SPEC_4 (0x24)
698/* Format 4 */
699#define CyCHAN_CTL (0x10)
700#define CyDIS_RCVR (0x01)
701#define CyENB_RCVR (0x02)
702#define CyDIS_XMTR (0x04)
703#define CyENB_XMTR (0x08)
704#define CySRER (0x06*2)
705#define CyMdmCh (0x80)
706#define CyRxData (0x10)
707#define CyTxRdy (0x04)
708#define CyTxMpty (0x02)
709#define CyNNDT (0x01)
710#define CyCOR1 (0x08*2)
711#define CyPARITY_NONE (0x00)
712#define CyPARITY_0 (0x20)
713#define CyPARITY_1 (0xA0)
714#define CyPARITY_E (0x40)
715#define CyPARITY_O (0xC0)
716#define Cy_1_STOP (0x00)
717#define Cy_1_5_STOP (0x04)
718#define Cy_2_STOP (0x08)
719#define Cy_5_BITS (0x00)
720#define Cy_6_BITS (0x01)
721#define Cy_7_BITS (0x02)
722#define Cy_8_BITS (0x03)
723#define CyCOR2 (0x09*2)
724#define CyIXM (0x80)
725#define CyTxIBE (0x40)
726#define CyETC (0x20)
727#define CyAUTO_TXFL (0x60)
728#define CyLLM (0x10)
729#define CyRLM (0x08)
730#define CyRtsAO (0x04)
731#define CyCtsAE (0x02)
732#define CyDsrAE (0x01)
733#define CyCOR3 (0x0A*2)
734#define CySPL_CH_DRANGE (0x80) /* special character detect range */
735#define CySPL_CH_DET1 (0x40) /* enable special character detection
736 on SCHR4-SCHR3 */
737#define CyFL_CTRL_TRNSP (0x20) /* Flow Control Transparency */
738#define CySPL_CH_DET2 (0x10) /* Enable special character detection
739 on SCHR2-SCHR1 */
740#define CyREC_FIFO (0x0F) /* Receive FIFO threshold */
741#define CyCOR4 (0x1E*2)
742#define CyCOR5 (0x1F*2)
743#define CyCCSR (0x0B*2)
744#define CyRxEN (0x80)
745#define CyRxFloff (0x40)
746#define CyRxFlon (0x20)
747#define CyTxEN (0x08)
748#define CyTxFloff (0x04)
749#define CyTxFlon (0x02)
750#define CyRDCR (0x0E*2)
751#define CySCHR1 (0x1A*2)
752#define CySCHR2 (0x1B*2)
753#define CySCHR3 (0x1C*2)
754#define CySCHR4 (0x1D*2)
755#define CySCRL (0x22*2)
756#define CySCRH (0x23*2)
757#define CyLNC (0x24*2)
758#define CyMCOR1 (0x15*2)
759#define CyMCOR2 (0x16*2)
760#define CyRTPR (0x21*2)
761#define CyMSVR1 (0x6C*2)
762#define CyMSVR2 (0x6D*2)
763#define CyANY_DELTA (0xF0)
764#define CyDSR (0x80)
765#define CyCTS (0x40)
766#define CyRI (0x20)
767#define CyDCD (0x10)
768#define CyDTR (0x02)
769#define CyRTS (0x01)
770#define CyPVSR (0x6F*2)
771#define CyRBPR (0x78*2)
772#define CyRCOR (0x7C*2)
773#define CyTBPR (0x72*2)
774#define CyTCOR (0x76*2)
775
776/* Custom Registers */
777
778#define CyPLX_VER (0x3400)
779#define PLX_9050 0x0b
780#define PLX_9060 0x0c
781#define PLX_9080 0x0d
782
783/***************************************************************************/
784
785#endif /* __KERNEL__ */
786#endif /* _LINUX_CYCLADES_H */