blob: d9a3bbe38e6b78b0aad1d1e90e5d98cc77d82003 [file] [log] [blame]
Pete Zaitceva00828e2005-10-22 20:15:09 -07001/*
2 * Interface to the libusual.
3 *
4 * Copyright (c) 2005 Pete Zaitcev <zaitcev@redhat.com>
5 * Copyright (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
6 * Copyright (c) 1999 Michael Gee (michael@linuxspecific.com)
7 */
8
9#ifndef __LINUX_USB_USUAL_H
10#define __LINUX_USB_USUAL_H
11
Pete Zaitceva00828e2005-10-22 20:15:09 -070012
13/* We should do this for cleanliness... But other usb_foo.h do not do this. */
14/* #include <linux/usb.h> */
15
16/*
17 * The flags field, which we store in usb_device_id.driver_info.
18 * It is compatible with the old usb-storage flags in lower 24 bits.
19 */
20
21/*
22 * Static flag definitions. We use this roundabout technique so that the
23 * proc_info() routine can automatically display a message for each flag.
24 */
25#define US_DO_ALL_FLAGS \
26 US_FLAG(SINGLE_LUN, 0x00000001) \
27 /* allow access to only LUN 0 */ \
28 US_FLAG(NEED_OVERRIDE, 0x00000002) \
29 /* unusual_devs entry is necessary */ \
30 US_FLAG(SCM_MULT_TARG, 0x00000004) \
31 /* supports multiple targets */ \
32 US_FLAG(FIX_INQUIRY, 0x00000008) \
33 /* INQUIRY response needs faking */ \
34 US_FLAG(FIX_CAPACITY, 0x00000010) \
35 /* READ CAPACITY response too big */ \
36 US_FLAG(IGNORE_RESIDUE, 0x00000020) \
37 /* reported residue is wrong */ \
38 US_FLAG(BULK32, 0x00000040) \
39 /* Uses 32-byte CBW length */ \
40 US_FLAG(NOT_LOCKABLE, 0x00000080) \
41 /* PREVENT/ALLOW not supported */ \
42 US_FLAG(GO_SLOW, 0x00000100) \
43 /* Need delay after Command phase */ \
44 US_FLAG(NO_WP_DETECT, 0x00000200) \
45 /* Don't check for write-protect */ \
Phil Dibowitz883d9892006-06-24 17:27:10 -070046 US_FLAG(MAX_SECTORS_64, 0x00000400) \
Daniel Drake3c332422006-07-26 13:59:23 +010047 /* Sets max_sectors to 64 */ \
48 US_FLAG(IGNORE_DEVICE, 0x00000800) \
Oliver Neukum61bf54b2007-02-08 09:04:48 +010049 /* Don't claim device */ \
50 US_FLAG(CAPACITY_HEURISTICS, 0x00001000) \
Doug Maxey33abc042007-12-05 23:36:45 -060051 /* sometimes sizes is too big */ \
52 US_FLAG(MAX_SECTORS_MIN,0x00002000) \
Constantin Baranovcc36bdd2008-03-16 20:04:23 +000053 /* Sets max_sectors to arch min */ \
54 US_FLAG(BULK_IGNORE_TAG,0x00004000) \
55 /* Ignore tag mismatch in bulk operations */
Doug Maxey33abc042007-12-05 23:36:45 -060056
Pete Zaitceva00828e2005-10-22 20:15:09 -070057
58#define US_FLAG(name, value) US_FL_##name = value ,
59enum { US_DO_ALL_FLAGS };
60#undef US_FLAG
61
62/*
63 * The bias field for libusual and friends.
64 */
65#define USB_US_TYPE_NONE 0
66#define USB_US_TYPE_STOR 1 /* usb-storage */
67#define USB_US_TYPE_UB 2 /* ub */
68
69#define USB_US_TYPE(flags) (((flags) >> 24) & 0xFF)
70#define USB_US_ORIG_FLAGS(flags) ((flags) & 0x00FFFFFF)
71
72/*
73 * This is probably not the best place to keep these constants, conceptually.
74 * But it's the only header included into all places which need them.
75 */
76
77/* Sub Classes */
78
79#define US_SC_RBC 0x01 /* Typically, flash devices */
80#define US_SC_8020 0x02 /* CD-ROM */
81#define US_SC_QIC 0x03 /* QIC-157 Tapes */
82#define US_SC_UFI 0x04 /* Floppy */
83#define US_SC_8070 0x05 /* Removable media */
84#define US_SC_SCSI 0x06 /* Transparent */
Alan Stern676d3aa2007-11-08 15:15:28 -050085#define US_SC_LOCKABLE 0x07 /* Password-protected */
Pete Zaitceva00828e2005-10-22 20:15:09 -070086
Alan Stern676d3aa2007-11-08 15:15:28 -050087#define US_SC_ISD200 0xf0 /* ISD200 ATA */
matthieu castetd2770642008-03-19 19:40:52 +010088#define US_SC_CYP_ATACB 0xf1 /* Cypress ATACB */
Pete Zaitceva00828e2005-10-22 20:15:09 -070089#define US_SC_DEVICE 0xff /* Use device's value */
90
91/* Protocols */
92
93#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */
94#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
95#define US_PR_BULK 0x50 /* bulk only */
96#ifdef CONFIG_USB_STORAGE_USBAT
97#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */
98#endif
99#ifdef CONFIG_USB_STORAGE_SDDR09
100#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
101#endif
102#ifdef CONFIG_USB_STORAGE_SDDR55
103#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */
104#endif
105#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
106#ifdef CONFIG_USB_STORAGE_FREECOM
107#define US_PR_FREECOM 0xf1 /* Freecom */
108#endif
109#ifdef CONFIG_USB_STORAGE_DATAFAB
110#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */
111#endif
112#ifdef CONFIG_USB_STORAGE_JUMPSHOT
113#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
114#endif
Matthew Dharme80b0fa2005-12-04 22:02:44 -0800115#ifdef CONFIG_USB_STORAGE_ALAUDA
116#define US_PR_ALAUDA 0xf4 /* Alauda chipsets */
117#endif
Matthew Dharmdfe0d3b2006-08-13 17:30:14 -0700118#ifdef CONFIG_USB_STORAGE_KARMA
119#define US_PR_KARMA 0xf5 /* Rio Karma */
120#endif
Pete Zaitceva00828e2005-10-22 20:15:09 -0700121
122#define US_PR_DEVICE 0xff /* Use device's value */
123
124/*
125 */
126#ifdef CONFIG_USB_LIBUSUAL
127
128extern struct usb_device_id storage_usb_ids[];
129extern void usb_usual_set_present(int type);
130extern void usb_usual_clear_present(int type);
131extern int usb_usual_check_type(const struct usb_device_id *, int type);
132#else
133
134#define usb_usual_set_present(t) do { } while(0)
135#define usb_usual_clear_present(t) do { } while(0)
136#define usb_usual_check_type(id, t) (0)
137#endif /* CONFIG_USB_LIBUSUAL */
138
139#endif /* __LINUX_USB_USUAL_H */