blob: 947dfb8cd5b252bf326d691ee5179e29ad07a9a9 [file] [log] [blame]
Dhaval Vasa7eeae542009-08-10 17:37:34 +05301/*
2 * arch/arm/mach-kirkwood/openrd_base-setup.c
3 *
4 * Marvell OpenRD Base Board Setup
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
10
11#include <linux/kernel.h>
12#include <linux/init.h>
13#include <linux/platform_device.h>
14#include <linux/mtd/partitions.h>
Ron Leedecf7702009-08-10 18:23:48 +053015#include <linux/ata_platform.h>
Dhaval Vasa7eeae542009-08-10 17:37:34 +053016#include <linux/mv643xx_eth.h>
17#include <asm/mach-types.h>
18#include <asm/mach/arch.h>
19#include <mach/kirkwood.h>
20#include <plat/mvsdio.h>
21#include "common.h"
22#include "mpp.h"
23
24static struct mtd_partition openrd_base_nand_parts[] = {
25 {
26 .name = "u-boot",
27 .offset = 0,
28 .size = SZ_1M
29 }, {
30 .name = "uImage",
31 .offset = MTDPART_OFS_NXTBLK,
32 .size = SZ_4M
33 }, {
34 .name = "root",
35 .offset = MTDPART_OFS_NXTBLK,
36 .size = MTDPART_SIZ_FULL
37 },
38};
39
40static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
41 .phy_addr = MV643XX_ETH_PHY_ADDR(8),
42};
43
Ron Leedecf7702009-08-10 18:23:48 +053044static struct mv_sata_platform_data openrd_base_sata_data = {
45 .n_ports = 2,
46};
47
Dhaval Vasa7eeae542009-08-10 17:37:34 +053048static struct mvsdio_platform_data openrd_base_mvsdio_data = {
49 .gpio_card_detect = 29, /* MPP29 used as SD card detect */
50};
51
52static unsigned int openrd_base_mpp_config[] __initdata = {
53 MPP29_GPIO,
54 0
55};
56
57static void __init openrd_base_init(void)
58{
59 /*
60 * Basic setup. Needs to be called early.
61 */
62 kirkwood_init();
63 kirkwood_mpp_conf(openrd_base_mpp_config);
64
65 kirkwood_uart0_init();
66 kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
67
68 kirkwood_ehci_init();
69
70 kirkwood_ge00_init(&openrd_base_ge00_data);
Ron Leedecf7702009-08-10 18:23:48 +053071 kirkwood_sata_init(&openrd_base_sata_data);
Dhaval Vasa7eeae542009-08-10 17:37:34 +053072 kirkwood_sdio_init(&openrd_base_mvsdio_data);
73}
74
75MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
76 /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
77 .phys_io = KIRKWOOD_REGS_PHYS_BASE,
78 .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
79 .boot_params = 0x00000100,
80 .init_machine = openrd_base_init,
81 .map_io = kirkwood_map_io,
82 .init_irq = kirkwood_init_irq,
83 .timer = &kirkwood_timer,
84MACHINE_END