blob: 77d0e5efda76a9bcd2138f878b2e0a442f137137 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Uwe Zeisbergerf30c2262006-10-03 23:01:26 +02002 * sound/oss/sb_common.c
Linus Torvalds1da177e2005-04-16 15:20:36 -07003 *
4 * Common routines for Sound Blaster compatible cards.
5 *
6 *
7 * Copyright (C) by Hannu Savolainen 1993-1997
8 *
9 * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
10 * Version 2 (June 1991). See the "COPYING" file distributed with this software
11 * for more info.
12 *
13 *
14 * Daniel J. Rodriksson: Modified sbintr to handle 8 and 16 bit interrupts
15 * for full duplex support ( only sb16 by now )
16 * Rolf Fokkens: Added (BETA?) support for ES1887 chips.
17 * (fokkensr@vertis.nl) Which means: You can adjust the recording levels.
18 *
19 * 2000/01/18 - separated sb_card and sb_common -
20 * Jeff Garzik <jgarzik@pobox.com>
21 *
22 * 2000/09/18 - got rid of attach_uart401
23 * Arnaldo Carvalho de Melo <acme@conectiva.com.br>
24 *
25 * 2001/01/26 - replaced CLI/STI with spinlocks
26 * Chris Rankin <rankinc@zipworld.com.au>
27 */
28
Linus Torvalds1da177e2005-04-16 15:20:36 -070029#include <linux/init.h>
30#include <linux/interrupt.h>
31#include <linux/module.h>
32#include <linux/delay.h>
33#include <linux/spinlock.h>
34
35#include "sound_config.h"
36#include "sound_firmware.h"
37
38#include "mpu401.h"
39
40#include "sb_mixer.h"
41#include "sb.h"
42#include "sb_ess.h"
43
44/*
45 * global module flag
46 */
47
48int sb_be_quiet;
49
50static sb_devc *detected_devc; /* For communication from probe to init */
51static sb_devc *last_devc; /* For MPU401 initialization */
52
53static unsigned char jazz_irq_bits[] = {
54 0, 0, 2, 3, 0, 1, 0, 4, 0, 2, 5, 0, 0, 0, 0, 6
55};
56
57static unsigned char jazz_dma_bits[] = {
58 0, 1, 0, 2, 0, 3, 0, 4
59};
60
61void *smw_free;
62
63/*
64 * Jazz16 chipset specific control variables
65 */
66
67static int jazz16_base; /* Not detected */
68static unsigned char jazz16_bits; /* I/O relocation bits */
69static DEFINE_SPINLOCK(jazz16_lock);
70
71/*
72 * Logitech Soundman Wave specific initialization code
73 */
74
75#ifdef SMW_MIDI0001_INCLUDED
76#include "smw-midi0001.h"
77#else
78static unsigned char *smw_ucode;
79static int smw_ucodeLen;
80
81#endif
82
83static sb_devc *last_sb; /* Last sb loaded */
84
85int sb_dsp_command(sb_devc * devc, unsigned char val)
86{
87 int i;
88 unsigned long limit;
89
90 limit = jiffies + HZ / 10; /* Timeout */
91
92 /*
93 * Note! the i<500000 is an emergency exit. The sb_dsp_command() is sometimes
94 * called while interrupts are disabled. This means that the timer is
95 * disabled also. However the timeout situation is a abnormal condition.
96 * Normally the DSP should be ready to accept commands after just couple of
97 * loops.
98 */
99
100 for (i = 0; i < 500000 && (limit-jiffies)>0; i++)
101 {
102 if ((inb(DSP_STATUS) & 0x80) == 0)
103 {
104 outb((val), DSP_COMMAND);
105 return 1;
106 }
107 }
108 printk(KERN_WARNING "Sound Blaster: DSP command(%x) timeout.\n", val);
109 return 0;
110}
111
112int sb_dsp_get_byte(sb_devc * devc)
113{
114 int i;
115
116 for (i = 1000; i; i--)
117 {
118 if (inb(DSP_DATA_AVAIL) & 0x80)
119 return inb(DSP_READ);
120 }
121 return 0xffff;
122}
123
124static void sb_intr (sb_devc *devc)
125{
126 int status;
127 unsigned char src = 0xff;
128
129 if (devc->model == MDL_SB16)
130 {
131 src = sb_getmixer(devc, IRQ_STAT); /* Interrupt source register */
132
133 if (src & 4) /* MPU401 interrupt */
134 if(devc->midi_irq_cookie)
David Howells7d12e782006-10-05 14:55:46 +0100135 uart401intr(devc->irq, devc->midi_irq_cookie);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700136
137 if (!(src & 3))
138 return; /* Not a DSP interrupt */
139 }
140 if (devc->intr_active && (!devc->fullduplex || (src & 0x01)))
141 {
142 switch (devc->irq_mode)
143 {
144 case IMODE_OUTPUT:
145 DMAbuf_outputintr(devc->dev, 1);
146 break;
147
148 case IMODE_INPUT:
149 DMAbuf_inputintr(devc->dev);
150 break;
151
152 case IMODE_INIT:
153 break;
154
155 case IMODE_MIDI:
156 sb_midi_interrupt(devc);
157 break;
158
159 default:
160 /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */
161 ;
162 }
163 }
164 else if (devc->intr_active_16 && (src & 0x02))
165 {
166 switch (devc->irq_mode_16)
167 {
168 case IMODE_OUTPUT:
169 DMAbuf_outputintr(devc->dev, 1);
170 break;
171
172 case IMODE_INPUT:
173 DMAbuf_inputintr(devc->dev);
174 break;
175
176 case IMODE_INIT:
177 break;
178
179 default:
180 /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */
181 ;
182 }
183 }
184 /*
185 * Acknowledge interrupts
186 */
187
188 if (src & 0x01)
189 status = inb(DSP_DATA_AVAIL);
190
191 if (devc->model == MDL_SB16 && src & 0x02)
192 status = inb(DSP_DATA_AVL16);
193}
194
195static void pci_intr(sb_devc *devc)
196{
197 int src = inb(devc->pcibase+0x1A);
198 src&=3;
199 if(src)
200 sb_intr(devc);
201}
202
David Howells7d12e782006-10-05 14:55:46 +0100203static irqreturn_t sbintr(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700204{
205 sb_devc *devc = dev_id;
206
207 devc->irq_ok = 1;
208
209 switch (devc->model) {
210 case MDL_ESSPCI:
211 pci_intr (devc);
212 break;
213
214 case MDL_ESS:
215 ess_intr (devc);
216 break;
217 default:
218 sb_intr (devc);
219 break;
220 }
221 return IRQ_HANDLED;
222}
223
224int sb_dsp_reset(sb_devc * devc)
225{
226 int loopc;
227
228 DEB(printk("Entered sb_dsp_reset()\n"));
229
230 if (devc->model == MDL_ESS) return ess_dsp_reset (devc);
231
232 /* This is only for non-ESS chips */
233
234 outb(1, DSP_RESET);
235
236 udelay(10);
237 outb(0, DSP_RESET);
238 udelay(30);
239
240 for (loopc = 0; loopc < 1000 && !(inb(DSP_DATA_AVAIL) & 0x80); loopc++);
241
242 if (inb(DSP_READ) != 0xAA)
243 {
244 DDB(printk("sb: No response to RESET\n"));
245 return 0; /* Sorry */
246 }
247
248 DEB(printk("sb_dsp_reset() OK\n"));
249
250 return 1;
251}
252
253static void dsp_get_vers(sb_devc * devc)
254{
255 int i;
256
257 unsigned long flags;
258
259 DDB(printk("Entered dsp_get_vers()\n"));
260 spin_lock_irqsave(&devc->lock, flags);
261 devc->major = devc->minor = 0;
262 sb_dsp_command(devc, 0xe1); /* Get version */
263
264 for (i = 100000; i; i--)
265 {
266 if (inb(DSP_DATA_AVAIL) & 0x80)
267 {
268 if (devc->major == 0)
269 devc->major = inb(DSP_READ);
270 else
271 {
272 devc->minor = inb(DSP_READ);
273 break;
274 }
275 }
276 }
277 spin_unlock_irqrestore(&devc->lock, flags);
278 DDB(printk("DSP version %d.%02d\n", devc->major, devc->minor));
279}
280
281static int sb16_set_dma_hw(sb_devc * devc)
282{
283 int bits;
284
285 if (devc->dma8 != 0 && devc->dma8 != 1 && devc->dma8 != 3)
286 {
287 printk(KERN_ERR "SB16: Invalid 8 bit DMA (%d)\n", devc->dma8);
288 return 0;
289 }
290 bits = (1 << devc->dma8);
291
292 if (devc->dma16 >= 5 && devc->dma16 <= 7)
293 bits |= (1 << devc->dma16);
294
295 sb_setmixer(devc, DMA_NR, bits);
296 return 1;
297}
298
299static void sb16_set_mpu_port(sb_devc * devc, struct address_info *hw_config)
300{
301 /*
302 * This routine initializes new MIDI port setup register of SB Vibra (CT2502).
303 */
304 unsigned char bits = sb_getmixer(devc, 0x84) & ~0x06;
305
306 switch (hw_config->io_base)
307 {
308 case 0x300:
309 sb_setmixer(devc, 0x84, bits | 0x04);
310 break;
311
312 case 0x330:
313 sb_setmixer(devc, 0x84, bits | 0x00);
314 break;
315
316 default:
317 sb_setmixer(devc, 0x84, bits | 0x02); /* Disable MPU */
318 printk(KERN_ERR "SB16: Invalid MIDI I/O port %x\n", hw_config->io_base);
319 }
320}
321
322static int sb16_set_irq_hw(sb_devc * devc, int level)
323{
324 int ival;
325
326 switch (level)
327 {
328 case 5:
329 ival = 2;
330 break;
331 case 7:
332 ival = 4;
333 break;
334 case 9:
335 ival = 1;
336 break;
337 case 10:
338 ival = 8;
339 break;
340 default:
341 printk(KERN_ERR "SB16: Invalid IRQ%d\n", level);
342 return 0;
343 }
344 sb_setmixer(devc, IRQ_NR, ival);
345 return 1;
346}
347
348static void relocate_Jazz16(sb_devc * devc, struct address_info *hw_config)
349{
350 unsigned char bits = 0;
351 unsigned long flags;
352
353 if (jazz16_base != 0 && jazz16_base != hw_config->io_base)
354 return;
355
356 switch (hw_config->io_base)
357 {
358 case 0x220:
359 bits = 1;
360 break;
361 case 0x240:
362 bits = 2;
363 break;
364 case 0x260:
365 bits = 3;
366 break;
367 default:
368 return;
369 }
370 bits = jazz16_bits = bits << 5;
371 jazz16_base = hw_config->io_base;
372
373 /*
374 * Magic wake up sequence by writing to 0x201 (aka Joystick port)
375 */
376 spin_lock_irqsave(&jazz16_lock, flags);
377 outb((0xAF), 0x201);
378 outb((0x50), 0x201);
379 outb((bits), 0x201);
380 spin_unlock_irqrestore(&jazz16_lock, flags);
381}
382
383static int init_Jazz16(sb_devc * devc, struct address_info *hw_config)
384{
385 char name[100];
386 /*
387 * First try to check that the card has Jazz16 chip. It identifies itself
388 * by returning 0x12 as response to DSP command 0xfa.
389 */
390
391 if (!sb_dsp_command(devc, 0xfa))
392 return 0;
393
394 if (sb_dsp_get_byte(devc) != 0x12)
395 return 0;
396
397 /*
398 * OK so far. Now configure the IRQ and DMA channel used by the card.
399 */
400 if (hw_config->irq < 1 || hw_config->irq > 15 || jazz_irq_bits[hw_config->irq] == 0)
401 {
402 printk(KERN_ERR "Jazz16: Invalid interrupt (IRQ%d)\n", hw_config->irq);
403 return 0;
404 }
405 if (hw_config->dma < 0 || hw_config->dma > 3 || jazz_dma_bits[hw_config->dma] == 0)
406 {
407 printk(KERN_ERR "Jazz16: Invalid 8 bit DMA (DMA%d)\n", hw_config->dma);
408 return 0;
409 }
410 if (hw_config->dma2 < 0)
411 {
412 printk(KERN_ERR "Jazz16: No 16 bit DMA channel defined\n");
413 return 0;
414 }
415 if (hw_config->dma2 < 5 || hw_config->dma2 > 7 || jazz_dma_bits[hw_config->dma2] == 0)
416 {
417 printk(KERN_ERR "Jazz16: Invalid 16 bit DMA (DMA%d)\n", hw_config->dma2);
418 return 0;
419 }
420 devc->dma16 = hw_config->dma2;
421
422 if (!sb_dsp_command(devc, 0xfb))
423 return 0;
424
425 if (!sb_dsp_command(devc, jazz_dma_bits[hw_config->dma] |
426 (jazz_dma_bits[hw_config->dma2] << 4)))
427 return 0;
428
429 if (!sb_dsp_command(devc, jazz_irq_bits[hw_config->irq]))
430 return 0;
431
432 /*
433 * Now we have configured a standard Jazz16 device.
434 */
435 devc->model = MDL_JAZZ;
436 strcpy(name, "Jazz16");
437
438 hw_config->name = "Jazz16";
439 devc->caps |= SB_NO_MIDI;
440 return 1;
441}
442
443static void relocate_ess1688(sb_devc * devc)
444{
445 unsigned char bits;
446
447 switch (devc->base)
448 {
449 case 0x220:
450 bits = 0x04;
451 break;
452 case 0x230:
453 bits = 0x05;
454 break;
455 case 0x240:
456 bits = 0x06;
457 break;
458 case 0x250:
459 bits = 0x07;
460 break;
461 default:
462 return; /* Wrong port */
463 }
464
465 DDB(printk("Doing ESS1688 address selection\n"));
466
467 /*
468 * ES1688 supports two alternative ways for software address config.
469 * First try the so called Read-Sequence-Key method.
470 */
471
472 /* Reset the sequence logic */
473 inb(0x229);
474 inb(0x229);
475 inb(0x229);
476
477 /* Perform the read sequence */
478 inb(0x22b);
479 inb(0x229);
480 inb(0x22b);
481 inb(0x229);
482 inb(0x229);
483 inb(0x22b);
484 inb(0x229);
485
486 /* Select the base address by reading from it. Then probe using the port. */
487 inb(devc->base);
488 if (sb_dsp_reset(devc)) /* Bingo */
489 return;
490
491#if 0 /* This causes system lockups (Nokia 386/25 at least) */
492 /*
493 * The last resort is the system control register method.
494 */
495
496 outb((0x00), 0xfb); /* 0xFB is the unlock register */
497 outb((0x00), 0xe0); /* Select index 0 */
498 outb((bits), 0xe1); /* Write the config bits */
499 outb((0x00), 0xf9); /* 0xFB is the lock register */
500#endif
501}
502
503int sb_dsp_detect(struct address_info *hw_config, int pci, int pciio, struct sb_module_options *sbmo)
504{
505 sb_devc sb_info;
506 sb_devc *devc = &sb_info;
507
508 memset((char *) &sb_info, 0, sizeof(sb_info)); /* Zero everything */
509
510 /* Copy module options in place */
511 if(sbmo) memcpy(&devc->sbmo, sbmo, sizeof(struct sb_module_options));
512
513 sb_info.my_mididev = -1;
514 sb_info.my_mixerdev = -1;
515 sb_info.dev = -1;
516
517 /*
518 * Initialize variables
519 */
520
521 DDB(printk("sb_dsp_detect(%x) entered\n", hw_config->io_base));
522
523 spin_lock_init(&devc->lock);
524 devc->type = hw_config->card_subtype;
525
526 devc->base = hw_config->io_base;
527 devc->irq = hw_config->irq;
528 devc->dma8 = hw_config->dma;
529
530 devc->dma16 = -1;
531 devc->pcibase = pciio;
532
533 if(pci == SB_PCI_ESSMAESTRO)
534 {
535 devc->model = MDL_ESSPCI;
536 devc->caps |= SB_PCI_IRQ;
537 hw_config->driver_use_1 |= SB_PCI_IRQ;
538 hw_config->card_subtype = MDL_ESSPCI;
539 }
540
541 if(pci == SB_PCI_YAMAHA)
542 {
543 devc->model = MDL_YMPCI;
544 devc->caps |= SB_PCI_IRQ;
545 hw_config->driver_use_1 |= SB_PCI_IRQ;
546 hw_config->card_subtype = MDL_YMPCI;
547
548 printk("Yamaha PCI mode.\n");
549 }
550
551 if (devc->sbmo.acer)
552 {
553 unsigned long flags;
554
555 spin_lock_irqsave(&devc->lock, flags);
556 inb(devc->base + 0x09);
557 inb(devc->base + 0x09);
558 inb(devc->base + 0x09);
559 inb(devc->base + 0x0b);
560 inb(devc->base + 0x09);
561 inb(devc->base + 0x0b);
562 inb(devc->base + 0x09);
563 inb(devc->base + 0x09);
564 inb(devc->base + 0x0b);
565 inb(devc->base + 0x09);
566 inb(devc->base + 0x00);
567 spin_unlock_irqrestore(&devc->lock, flags);
568 }
569 /*
570 * Detect the device
571 */
572
573 if (sb_dsp_reset(devc))
574 dsp_get_vers(devc);
575 else
576 devc->major = 0;
577
578 if (devc->type == 0 || devc->type == MDL_JAZZ || devc->type == MDL_SMW)
579 if (devc->major == 0 || (devc->major == 3 && devc->minor == 1))
580 relocate_Jazz16(devc, hw_config);
581
582 if (devc->major == 0 && (devc->type == MDL_ESS || devc->type == 0))
583 relocate_ess1688(devc);
584
585 if (!sb_dsp_reset(devc))
586 {
587 DDB(printk("SB reset failed\n"));
588#ifdef MODULE
589 printk(KERN_INFO "sb: dsp reset failed.\n");
590#endif
591 return 0;
592 }
593 if (devc->major == 0)
594 dsp_get_vers(devc);
595
596 if (devc->major == 3 && devc->minor == 1)
597 {
598 if (devc->type == MDL_AZTECH) /* SG Washington? */
599 {
600 if (sb_dsp_command(devc, 0x09))
601 if (sb_dsp_command(devc, 0x00)) /* Enter WSS mode */
602 {
603 int i;
604
605 /* Have some delay */
606 for (i = 0; i < 10000; i++)
607 inb(DSP_DATA_AVAIL);
608 devc->caps = SB_NO_AUDIO | SB_NO_MIDI; /* Mixer only */
609 devc->model = MDL_AZTECH;
610 }
611 }
612 }
613
614 if(devc->type == MDL_ESSPCI)
615 devc->model = MDL_ESSPCI;
616
617 if(devc->type == MDL_YMPCI)
618 {
619 printk("YMPCI selected\n");
620 devc->model = MDL_YMPCI;
621 }
622
623 /*
624 * Save device information for sb_dsp_init()
625 */
626
627
Robert P. J. Day5cbded52006-12-13 00:35:56 -0800628 detected_devc = kmalloc(sizeof(sb_devc), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700629 if (detected_devc == NULL)
630 {
631 printk(KERN_ERR "sb: Can't allocate memory for device information\n");
632 return 0;
633 }
634 memcpy(detected_devc, devc, sizeof(sb_devc));
635 MDB(printk(KERN_INFO "SB %d.%02d detected OK (%x)\n", devc->major, devc->minor, hw_config->io_base));
636 return 1;
637}
638
639int sb_dsp_init(struct address_info *hw_config, struct module *owner)
640{
641 sb_devc *devc;
642 char name[100];
643 extern int sb_be_quiet;
644 int mixer22, mixer30;
645
646/*
647 * Check if we had detected a SB device earlier
648 */
649 DDB(printk("sb_dsp_init(%x) entered\n", hw_config->io_base));
650 name[0] = 0;
651
652 if (detected_devc == NULL)
653 {
654 MDB(printk("No detected device\n"));
655 return 0;
656 }
657 devc = detected_devc;
658 detected_devc = NULL;
659
660 if (devc->base != hw_config->io_base)
661 {
662 DDB(printk("I/O port mismatch\n"));
663 release_region(devc->base, 16);
664 return 0;
665 }
666 /*
667 * Now continue initialization of the device
668 */
669
670 devc->caps = hw_config->driver_use_1;
671
672 if (!((devc->caps & SB_NO_AUDIO) && (devc->caps & SB_NO_MIDI)) && hw_config->irq > 0)
673 { /* IRQ setup */
674
675 /*
676 * ESS PCI cards do shared PCI IRQ stuff. Since they
677 * will get shared PCI irq lines we must cope.
678 */
679
Thomas Gleixner65ca68b2006-07-01 19:29:46 -0700680 int i=(devc->caps&SB_PCI_IRQ)?IRQF_SHARED:0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700681
682 if (request_irq(hw_config->irq, sbintr, i, "soundblaster", devc) < 0)
683 {
684 printk(KERN_ERR "SB: Can't allocate IRQ%d\n", hw_config->irq);
685 release_region(devc->base, 16);
686 return 0;
687 }
688 devc->irq_ok = 0;
689
690 if (devc->major == 4)
691 if (!sb16_set_irq_hw(devc, devc->irq)) /* Unsupported IRQ */
692 {
693 free_irq(devc->irq, devc);
694 release_region(devc->base, 16);
695 return 0;
696 }
697 if ((devc->type == 0 || devc->type == MDL_ESS) &&
698 devc->major == 3 && devc->minor == 1)
699 { /* Handle various chipsets which claim they are SB Pro compatible */
700 if ((devc->type != 0 && devc->type != MDL_ESS) ||
701 !ess_init(devc, hw_config))
702 {
703 if ((devc->type != 0 && devc->type != MDL_JAZZ &&
704 devc->type != MDL_SMW) || !init_Jazz16(devc, hw_config))
705 {
706 DDB(printk("This is a genuine SB Pro\n"));
707 }
708 }
709 }
710 if (devc->major == 4 && devc->minor <= 11 ) /* Won't work */
711 devc->irq_ok = 1;
712 else
713 {
714 int n;
715
716 for (n = 0; n < 3 && devc->irq_ok == 0; n++)
717 {
718 if (sb_dsp_command(devc, 0xf2)) /* Cause interrupt immediately */
719 {
720 int i;
721
722 for (i = 0; !devc->irq_ok && i < 10000; i++);
723 }
724 }
725 if (!devc->irq_ok)
726 printk(KERN_WARNING "sb: Interrupt test on IRQ%d failed - Probable IRQ conflict\n", devc->irq);
727 else
728 {
729 DDB(printk("IRQ test OK (IRQ%d)\n", devc->irq));
730 }
731 }
732 } /* IRQ setup */
733
734 last_sb = devc;
735
736 switch (devc->major)
737 {
738 case 1: /* SB 1.0 or 1.5 */
739 devc->model = hw_config->card_subtype = MDL_SB1;
740 break;
741
742 case 2: /* SB 2.x */
743 if (devc->minor == 0)
744 devc->model = hw_config->card_subtype = MDL_SB2;
745 else
746 devc->model = hw_config->card_subtype = MDL_SB201;
747 break;
748
749 case 3: /* SB Pro and most clones */
750 switch (devc->model) {
751 case 0:
752 devc->model = hw_config->card_subtype = MDL_SBPRO;
753 if (hw_config->name == NULL)
754 hw_config->name = "Sound Blaster Pro (8 BIT ONLY)";
755 break;
756 case MDL_ESS:
757 ess_dsp_init(devc, hw_config);
758 break;
759 }
760 break;
761
762 case 4:
763 devc->model = hw_config->card_subtype = MDL_SB16;
764 /*
765 * ALS007 and ALS100 return DSP version 4.2 and have 2 post-reset !=0
766 * registers at 0x3c and 0x4c (output ctrl registers on ALS007) whereas
767 * a "standard" SB16 doesn't have a register at 0x4c. ALS100 actively
768 * updates register 0x22 whenever 0x30 changes, as per the SB16 spec.
769 * Since ALS007 doesn't, this can be used to differentiate the 2 cards.
770 */
771 if ((devc->minor == 2) && sb_getmixer(devc,0x3c) && sb_getmixer(devc,0x4c))
772 {
773 mixer30 = sb_getmixer(devc,0x30);
774 sb_setmixer(devc,0x22,(mixer22=sb_getmixer(devc,0x22)) & 0x0f);
775 sb_setmixer(devc,0x30,0xff);
776 /* ALS100 will force 0x30 to 0xf8 like SB16; ALS007 will allow 0xff. */
777 /* Register 0x22 & 0xf0 on ALS100 == 0xf0; on ALS007 it == 0x10. */
778 if ((sb_getmixer(devc,0x30) != 0xff) || ((sb_getmixer(devc,0x22) & 0xf0) != 0x10))
779 {
780 devc->submodel = SUBMDL_ALS100;
781 if (hw_config->name == NULL)
782 hw_config->name = "Sound Blaster 16 (ALS-100)";
783 }
784 else
785 {
786 sb_setmixer(devc,0x3c,0x1f); /* Enable all inputs */
787 sb_setmixer(devc,0x4c,0x1f);
788 sb_setmixer(devc,0x22,mixer22); /* Restore 0x22 to original value */
789 devc->submodel = SUBMDL_ALS007;
790 if (hw_config->name == NULL)
791 hw_config->name = "Sound Blaster 16 (ALS-007)";
792 }
793 sb_setmixer(devc,0x30,mixer30);
794 }
795 else if (hw_config->name == NULL)
796 hw_config->name = "Sound Blaster 16";
797
798 if (hw_config->dma2 == -1)
799 devc->dma16 = devc->dma8;
800 else if (hw_config->dma2 < 5 || hw_config->dma2 > 7)
801 {
802 printk(KERN_WARNING "SB16: Bad or missing 16 bit DMA channel\n");
803 devc->dma16 = devc->dma8;
804 }
805 else
806 devc->dma16 = hw_config->dma2;
807
808 if(!sb16_set_dma_hw(devc)) {
809 free_irq(devc->irq, devc);
810 release_region(hw_config->io_base, 16);
811 return 0;
812 }
813
814 devc->caps |= SB_NO_MIDI;
815 }
816
817 if (!(devc->caps & SB_NO_MIXER))
818 if (devc->major == 3 || devc->major == 4)
819 sb_mixer_init(devc, owner);
820
821 if (!(devc->caps & SB_NO_MIDI))
822 sb_dsp_midi_init(devc, owner);
823
824 if (hw_config->name == NULL)
825 hw_config->name = "Sound Blaster (8 BIT/MONO ONLY)";
826
827 sprintf(name, "%s (%d.%02d)", hw_config->name, devc->major, devc->minor);
828 conf_printf(name, hw_config);
829
830 /*
831 * Assuming that a sound card is Sound Blaster (compatible) is the most common
832 * configuration error and the mother of all problems. Usually sound cards
833 * emulate SB Pro but in addition they have a 16 bit native mode which should be
834 * used in Unix. See Readme.cards for more information about configuring OSS/Free
835 * properly.
836 */
837 if (devc->model <= MDL_SBPRO)
838 {
839 if (devc->major == 3 && devc->minor != 1) /* "True" SB Pro should have v3.1 (rare ones may have 3.2). */
840 {
841 printk(KERN_INFO "This sound card may not be fully Sound Blaster Pro compatible.\n");
842 printk(KERN_INFO "In many cases there is another way to configure OSS so that\n");
843 printk(KERN_INFO "it works properly with OSS (for example in 16 bit mode).\n");
844 printk(KERN_INFO "Please ignore this message if you _really_ have a SB Pro.\n");
845 }
846 else if (!sb_be_quiet && devc->model == MDL_SBPRO)
847 {
848 printk(KERN_INFO "SB DSP version is just %d.%02d which means that your card is\n", devc->major, devc->minor);
849 printk(KERN_INFO "several years old (8 bit only device) or alternatively the sound driver\n");
850 printk(KERN_INFO "is incorrectly configured.\n");
851 }
852 }
853 hw_config->card_subtype = devc->model;
854 hw_config->slots[0]=devc->dev;
855 last_devc = devc; /* For SB MPU detection */
856
857 if (!(devc->caps & SB_NO_AUDIO) && devc->dma8 >= 0)
858 {
859 if (sound_alloc_dma(devc->dma8, "SoundBlaster8"))
860 {
861 printk(KERN_WARNING "Sound Blaster: Can't allocate 8 bit DMA channel %d\n", devc->dma8);
862 }
863 if (devc->dma16 >= 0 && devc->dma16 != devc->dma8)
864 {
865 if (sound_alloc_dma(devc->dma16, "SoundBlaster16"))
866 printk(KERN_WARNING "Sound Blaster: can't allocate 16 bit DMA channel %d.\n", devc->dma16);
867 }
868 sb_audio_init(devc, name, owner);
869 hw_config->slots[0]=devc->dev;
870 }
871 else
872 {
873 MDB(printk("Sound Blaster: no audio devices found.\n"));
874 }
875 return 1;
876}
877
878/* if (sbmpu) below we allow mpu401 to manage the midi devs
879 otherwise we have to unload them. (Andrzej Krzysztofowicz) */
880
881void sb_dsp_unload(struct address_info *hw_config, int sbmpu)
882{
883 sb_devc *devc;
884
885 devc = audio_devs[hw_config->slots[0]]->devc;
886
887 if (devc && devc->base == hw_config->io_base)
888 {
889 if ((devc->model & MDL_ESS) && devc->pcibase)
890 release_region(devc->pcibase, 8);
891
892 release_region(devc->base, 16);
893
894 if (!(devc->caps & SB_NO_AUDIO))
895 {
896 sound_free_dma(devc->dma8);
897 if (devc->dma16 >= 0)
898 sound_free_dma(devc->dma16);
899 }
900 if (!(devc->caps & SB_NO_AUDIO && devc->caps & SB_NO_MIDI))
901 {
902 if (devc->irq > 0)
903 free_irq(devc->irq, devc);
904
905 sb_mixer_unload(devc);
906 /* We don't have to do this bit any more the UART401 is its own
907 master -- Krzysztof Halasa */
908 /* But we have to do it, if UART401 is not detected */
909 if (!sbmpu)
910 sound_unload_mididev(devc->my_mididev);
911 sound_unload_audiodev(devc->dev);
912 }
913 kfree(devc);
914 }
915 else
916 release_region(hw_config->io_base, 16);
Jesper Juhl09417372005-06-25 14:58:49 -0700917
918 kfree(detected_devc);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700919}
920
921/*
922 * Mixer access routines
923 *
924 * ES1887 modifications: some mixer registers reside in the
925 * range above 0xa0. These must be accessed in another way.
926 */
927
928void sb_setmixer(sb_devc * devc, unsigned int port, unsigned int value)
929{
930 unsigned long flags;
931
932 if (devc->model == MDL_ESS) {
933 ess_setmixer (devc, port, value);
934 return;
935 }
936
937 spin_lock_irqsave(&devc->lock, flags);
938
939 outb(((unsigned char) (port & 0xff)), MIXER_ADDR);
940 udelay(20);
941 outb(((unsigned char) (value & 0xff)), MIXER_DATA);
942 udelay(20);
943
944 spin_unlock_irqrestore(&devc->lock, flags);
945}
946
947unsigned int sb_getmixer(sb_devc * devc, unsigned int port)
948{
949 unsigned int val;
950 unsigned long flags;
951
952 if (devc->model == MDL_ESS) return ess_getmixer (devc, port);
953
954 spin_lock_irqsave(&devc->lock, flags);
955
956 outb(((unsigned char) (port & 0xff)), MIXER_ADDR);
957 udelay(20);
958 val = inb(MIXER_DATA);
959 udelay(20);
960
961 spin_unlock_irqrestore(&devc->lock, flags);
962
963 return val;
964}
965
966void sb_chgmixer
967 (sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val)
968{
969 int value;
970
971 value = sb_getmixer(devc, reg);
972 value = (value & ~mask) | (val & mask);
973 sb_setmixer(devc, reg, value);
974}
975
976/*
977 * MPU401 MIDI initialization.
978 */
979
980static void smw_putmem(sb_devc * devc, int base, int addr, unsigned char val)
981{
982 unsigned long flags;
983
984 spin_lock_irqsave(&jazz16_lock, flags); /* NOT the SB card? */
985
986 outb((addr & 0xff), base + 1); /* Low address bits */
987 outb((addr >> 8), base + 2); /* High address bits */
988 outb((val), base); /* Data */
989
990 spin_unlock_irqrestore(&jazz16_lock, flags);
991}
992
993static unsigned char smw_getmem(sb_devc * devc, int base, int addr)
994{
995 unsigned long flags;
996 unsigned char val;
997
998 spin_lock_irqsave(&jazz16_lock, flags); /* NOT the SB card? */
999
1000 outb((addr & 0xff), base + 1); /* Low address bits */
1001 outb((addr >> 8), base + 2); /* High address bits */
1002 val = inb(base); /* Data */
1003
1004 spin_unlock_irqrestore(&jazz16_lock, flags);
1005 return val;
1006}
1007
1008static int smw_midi_init(sb_devc * devc, struct address_info *hw_config)
1009{
1010 int mpu_base = hw_config->io_base;
1011 int mp_base = mpu_base + 4; /* Microcontroller base */
1012 int i;
1013 unsigned char control;
1014
1015
1016 /*
1017 * Reset the microcontroller so that the RAM can be accessed
1018 */
1019
1020 control = inb(mpu_base + 7);
1021 outb((control | 3), mpu_base + 7); /* Set last two bits to 1 (?) */
1022 outb(((control & 0xfe) | 2), mpu_base + 7); /* xxxxxxx0 resets the mc */
1023
1024 mdelay(3); /* Wait at least 1ms */
1025
1026 outb((control & 0xfc), mpu_base + 7); /* xxxxxx00 enables RAM */
1027
1028 /*
1029 * Detect microcontroller by probing the 8k RAM area
1030 */
1031 smw_putmem(devc, mp_base, 0, 0x00);
1032 smw_putmem(devc, mp_base, 1, 0xff);
1033 udelay(10);
1034
1035 if (smw_getmem(devc, mp_base, 0) != 0x00 || smw_getmem(devc, mp_base, 1) != 0xff)
1036 {
1037 DDB(printk("SM Wave: No microcontroller RAM detected (%02x, %02x)\n", smw_getmem(devc, mp_base, 0), smw_getmem(devc, mp_base, 1)));
1038 return 0; /* No RAM */
1039 }
1040 /*
1041 * There is RAM so assume it's really a SM Wave
1042 */
1043
1044 devc->model = MDL_SMW;
1045 smw_mixer_init(devc);
1046
1047#ifdef MODULE
1048 if (!smw_ucode)
1049 {
1050 smw_ucodeLen = mod_firmware_load("/etc/sound/midi0001.bin", (void *) &smw_ucode);
1051 smw_free = smw_ucode;
1052 }
1053#endif
1054 if (smw_ucodeLen > 0)
1055 {
1056 if (smw_ucodeLen != 8192)
1057 {
1058 printk(KERN_ERR "SM Wave: Invalid microcode (MIDI0001.BIN) length\n");
1059 return 1;
1060 }
1061 /*
1062 * Download microcode
1063 */
1064
1065 for (i = 0; i < 8192; i++)
1066 smw_putmem(devc, mp_base, i, smw_ucode[i]);
1067
1068 /*
1069 * Verify microcode
1070 */
1071
1072 for (i = 0; i < 8192; i++)
1073 if (smw_getmem(devc, mp_base, i) != smw_ucode[i])
1074 {
1075 printk(KERN_ERR "SM Wave: Microcode verification failed\n");
1076 return 0;
1077 }
1078 }
1079 control = 0;
1080#ifdef SMW_SCSI_IRQ
1081 /*
1082 * Set the SCSI interrupt (IRQ2/9, IRQ3 or IRQ10). The SCSI interrupt
1083 * is disabled by default.
1084 *
1085 * FIXME - make this a module option
1086 *
1087 * BTW the Zilog 5380 SCSI controller is located at MPU base + 0x10.
1088 */
1089 {
1090 static unsigned char scsi_irq_bits[] = {
1091 0, 0, 3, 1, 0, 0, 0, 0, 0, 3, 2, 0, 0, 0, 0, 0
1092 };
1093 control |= scsi_irq_bits[SMW_SCSI_IRQ] << 6;
1094 }
1095#endif
1096
1097#ifdef SMW_OPL4_ENABLE
1098 /*
1099 * Make the OPL4 chip visible on the PC bus at 0x380.
1100 *
1101 * There is no need to enable this feature since this driver
1102 * doesn't support OPL4 yet. Also there is no RAM in SM Wave so
1103 * enabling OPL4 is pretty useless.
1104 */
1105 control |= 0x10; /* Uses IRQ12 if bit 0x20 == 0 */
1106 /* control |= 0x20; Uncomment this if you want to use IRQ7 */
1107#endif
1108 outb((control | 0x03), mpu_base + 7); /* xxxxxx11 restarts */
1109 hw_config->name = "SoundMan Wave";
1110 return 1;
1111}
1112
1113static int init_Jazz16_midi(sb_devc * devc, struct address_info *hw_config)
1114{
1115 int mpu_base = hw_config->io_base;
1116 int sb_base = devc->base;
1117 int irq = hw_config->irq;
1118
1119 unsigned char bits = 0;
1120 unsigned long flags;
1121
1122 if (irq < 0)
1123 irq *= -1;
1124
1125 if (irq < 1 || irq > 15 ||
1126 jazz_irq_bits[irq] == 0)
1127 {
1128 printk(KERN_ERR "Jazz16: Invalid MIDI interrupt (IRQ%d)\n", irq);
1129 return 0;
1130 }
1131 switch (sb_base)
1132 {
1133 case 0x220:
1134 bits = 1;
1135 break;
1136 case 0x240:
1137 bits = 2;
1138 break;
1139 case 0x260:
1140 bits = 3;
1141 break;
1142 default:
1143 return 0;
1144 }
1145 bits = jazz16_bits = bits << 5;
1146 switch (mpu_base)
1147 {
1148 case 0x310:
1149 bits |= 1;
1150 break;
1151 case 0x320:
1152 bits |= 2;
1153 break;
1154 case 0x330:
1155 bits |= 3;
1156 break;
1157 default:
1158 printk(KERN_ERR "Jazz16: Invalid MIDI I/O port %x\n", mpu_base);
1159 return 0;
1160 }
1161 /*
1162 * Magic wake up sequence by writing to 0x201 (aka Joystick port)
1163 */
1164 spin_lock_irqsave(&jazz16_lock, flags);
1165 outb(0xAF, 0x201);
1166 outb(0x50, 0x201);
1167 outb(bits, 0x201);
1168 spin_unlock_irqrestore(&jazz16_lock, flags);
1169
1170 hw_config->name = "Jazz16";
1171 smw_midi_init(devc, hw_config);
1172
1173 if (!sb_dsp_command(devc, 0xfb))
1174 return 0;
1175
1176 if (!sb_dsp_command(devc, jazz_dma_bits[devc->dma8] |
1177 (jazz_dma_bits[devc->dma16] << 4)))
1178 return 0;
1179
1180 if (!sb_dsp_command(devc, jazz_irq_bits[devc->irq] |
1181 (jazz_irq_bits[irq] << 4)))
1182 return 0;
1183
1184 return 1;
1185}
1186
1187int probe_sbmpu(struct address_info *hw_config, struct module *owner)
1188{
1189 sb_devc *devc = last_devc;
1190 int ret;
1191
1192 if (last_devc == NULL)
1193 return 0;
1194
1195 last_devc = NULL;
1196
1197 if (hw_config->io_base <= 0)
1198 {
1199 /* The real vibra16 is fine about this, but we have to go
1200 wipe up after Cyrix again */
1201
1202 if(devc->model == MDL_SB16 && devc->minor >= 12)
1203 {
1204 unsigned char bits = sb_getmixer(devc, 0x84) & ~0x06;
1205 sb_setmixer(devc, 0x84, bits | 0x02); /* Disable MPU */
1206 }
1207 return 0;
1208 }
1209
1210#if defined(CONFIG_SOUND_MPU401)
1211 if (devc->model == MDL_ESS)
1212 {
1213 struct resource *ports;
1214 ports = request_region(hw_config->io_base, 2, "mpu401");
1215 if (!ports) {
1216 printk(KERN_ERR "sbmpu: I/O port conflict (%x)\n", hw_config->io_base);
1217 return 0;
1218 }
1219 if (!ess_midi_init(devc, hw_config)) {
1220 release_region(hw_config->io_base, 2);
1221 return 0;
1222 }
1223 hw_config->name = "ESS1xxx MPU";
1224 devc->midi_irq_cookie = NULL;
1225 if (!probe_mpu401(hw_config, ports)) {
1226 release_region(hw_config->io_base, 2);
1227 return 0;
1228 }
1229 attach_mpu401(hw_config, owner);
1230 if (last_sb->irq == -hw_config->irq)
Jeff Garzik73de76a2008-02-06 01:36:16 -08001231 last_sb->midi_irq_cookie =
1232 (void *)(long) hw_config->slots[1];
Linus Torvalds1da177e2005-04-16 15:20:36 -07001233 return 1;
1234 }
1235#endif
1236
1237 switch (devc->model)
1238 {
1239 case MDL_SB16:
1240 if (hw_config->io_base != 0x300 && hw_config->io_base != 0x330)
1241 {
1242 printk(KERN_ERR "SB16: Invalid MIDI port %x\n", hw_config->io_base);
1243 return 0;
1244 }
1245 hw_config->name = "Sound Blaster 16";
1246 if (hw_config->irq < 3 || hw_config->irq == devc->irq)
1247 hw_config->irq = -devc->irq;
1248 if (devc->minor > 12) /* What is Vibra's version??? */
1249 sb16_set_mpu_port(devc, hw_config);
1250 break;
1251
1252 case MDL_JAZZ:
1253 if (hw_config->irq < 3 || hw_config->irq == devc->irq)
1254 hw_config->irq = -devc->irq;
1255 if (!init_Jazz16_midi(devc, hw_config))
1256 return 0;
1257 break;
1258
1259 case MDL_YMPCI:
1260 hw_config->name = "Yamaha PCI Legacy";
1261 printk("Yamaha PCI legacy UART401 check.\n");
1262 break;
1263 default:
1264 return 0;
1265 }
1266
1267 ret = probe_uart401(hw_config, owner);
1268 if (ret)
1269 last_sb->midi_irq_cookie=midi_devs[hw_config->slots[4]]->devc;
1270 return ret;
1271}
1272
1273void unload_sbmpu(struct address_info *hw_config)
1274{
1275#if defined(CONFIG_SOUND_MPU401)
1276 if (!strcmp (hw_config->name, "ESS1xxx MPU")) {
1277 unload_mpu401(hw_config);
1278 return;
1279 }
1280#endif
1281 unload_uart401(hw_config);
1282}
1283
1284EXPORT_SYMBOL(sb_dsp_init);
1285EXPORT_SYMBOL(sb_dsp_detect);
1286EXPORT_SYMBOL(sb_dsp_unload);
1287EXPORT_SYMBOL(sb_be_quiet);
1288EXPORT_SYMBOL(probe_sbmpu);
1289EXPORT_SYMBOL(unload_sbmpu);
1290EXPORT_SYMBOL(smw_free);
1291MODULE_LICENSE("GPL");