blob: 4ffa2585429a4965d979b67cea2ba870357baef5 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/serial/s3c2410.c
3 *
4 * Driver for onboard UARTs on the Samsung S3C24XX
5 *
6 * Based on drivers/char/serial.c and drivers/char/21285.c
7 *
8 * Ben Dooks, (c) 2003-2005 Simtec Electronics
9 * http://www.simtec.co.uk/products/SWLINUX/
10 *
11 * Changelog:
12 *
13 * 22-Jul-2004 BJD Finished off device rewrite
14 *
15 * 21-Jul-2004 BJD Thanks to <herbet@13thfloor.at> for pointing out
16 * problems with baud rate and loss of IR settings. Update
17 * to add configuration via platform_device structure
18 *
19 * 28-Sep-2004 BJD Re-write for the following items
20 * - S3C2410 and S3C2440 serial support
21 * - Power Management support
22 * - Fix console via IrDA devices
Jan Engelhardt96de0e22007-10-19 23:21:04 +020023 * - SysReq (Herbert Pötzl)
24 * - Break character handling (Herbert Pötzl)
Linus Torvalds1da177e2005-04-16 15:20:36 -070025 * - spin-lock initialisation (Dimitry Andric)
26 * - added clock control
27 * - updated init code to use platform_device info
28 *
29 * 06-Mar-2005 BJD Add s3c2440 fclk clock source
30 *
31 * 09-Mar-2005 BJD Add s3c2400 support
32 *
33 * 10-Mar-2005 LCVR Changed S3C2410_VA_UART to S3C24XX_VA_UART
34*/
35
36/* Note on 2440 fclk clock source handling
37 *
38 * Whilst it is possible to use the fclk as clock source, the method
39 * of properly switching too/from this is currently un-implemented, so
40 * whichever way is configured at startup is the one that will be used.
41*/
42
43/* Hote on 2410 error handling
44 *
45 * The s3c2410 manual has a love/hate affair with the contents of the
46 * UERSTAT register in the UART blocks, and keeps marking some of the
47 * error bits as reserved. Having checked with the s3c2410x01,
48 * it copes with BREAKs properly, so I am happy to ignore the RESERVED
49 * feature from the latter versions of the manual.
50 *
51 * If it becomes aparrent that latter versions of the 2410 remove these
52 * bits, then action will have to be taken to differentiate the versions
53 * and change the policy on BREAK
54 *
55 * BJD, 04-Nov-2004
56*/
57
Linus Torvalds1da177e2005-04-16 15:20:36 -070058
59#if defined(CONFIG_SERIAL_S3C2410_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
60#define SUPPORT_SYSRQ
61#endif
62
63#include <linux/module.h>
64#include <linux/ioport.h>
Russell Kingd052d1b2005-10-29 19:07:23 +010065#include <linux/platform_device.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070066#include <linux/init.h>
67#include <linux/sysrq.h>
68#include <linux/console.h>
69#include <linux/tty.h>
70#include <linux/tty_flip.h>
71#include <linux/serial_core.h>
72#include <linux/serial.h>
73#include <linux/delay.h>
Russell Kingf8ce2542006-01-07 16:15:52 +000074#include <linux/clk.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070075
76#include <asm/io.h>
77#include <asm/irq.h>
78
79#include <asm/hardware.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070080
Ben Dooks531b6172007-07-22 16:05:25 +010081#include <asm/plat-s3c/regs-serial.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070082#include <asm/arch/regs-gpio.h>
83
Linus Torvalds1da177e2005-04-16 15:20:36 -070084/* structures */
85
86struct s3c24xx_uart_info {
87 char *name;
88 unsigned int type;
89 unsigned int fifosize;
90 unsigned long rx_fifomask;
91 unsigned long rx_fifoshift;
92 unsigned long rx_fifofull;
93 unsigned long tx_fifomask;
94 unsigned long tx_fifoshift;
95 unsigned long tx_fifofull;
96
97 /* clock source control */
98
99 int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
100 int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
101
102 /* uart controls */
103 int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
104};
105
106struct s3c24xx_uart_port {
107 unsigned char rx_claimed;
108 unsigned char tx_claimed;
109
110 struct s3c24xx_uart_info *info;
111 struct s3c24xx_uart_clksrc *clksrc;
112 struct clk *clk;
113 struct clk *baudclk;
114 struct uart_port port;
115};
116
117
118/* configuration defines */
119
120#if 0
121#if 1
122/* send debug to the low-level output routines */
123
124extern void printascii(const char *);
125
126static void
127s3c24xx_serial_dbg(const char *fmt, ...)
128{
129 va_list va;
130 char buff[256];
131
132 va_start(va, fmt);
133 vsprintf(buff, fmt, va);
134 va_end(va);
135
136 printascii(buff);
137}
138
139#define dbg(x...) s3c24xx_serial_dbg(x)
140
141#else
142#define dbg(x...) printk(KERN_DEBUG "s3c24xx: ");
143#endif
144#else /* no debug */
145#define dbg(x...) do {} while(0)
146#endif
147
148/* UART name and device definitions */
149
150#define S3C24XX_SERIAL_NAME "ttySAC"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700151#define S3C24XX_SERIAL_MAJOR 204
152#define S3C24XX_SERIAL_MINOR 64
153
154
155/* conversion functions */
156
157#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
158#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data)
159
160/* we can support 3 uarts, but not always use them */
161
Lucas Correia Villa Real5cba7422006-02-08 21:31:54 +0000162#ifdef CONFIG_CPU_S3C2400
163#define NR_PORTS (2)
164#else
Linus Torvalds1da177e2005-04-16 15:20:36 -0700165#define NR_PORTS (3)
Lucas Correia Villa Real5cba7422006-02-08 21:31:54 +0000166#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700167
168/* port irq numbers */
169
170#define TX_IRQ(port) ((port)->irq + 1)
171#define RX_IRQ(port) ((port)->irq)
172
173/* register access controls */
174
175#define portaddr(port, reg) ((port)->membase + (reg))
176
177#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
178#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
179
180#define wr_regb(port, reg, val) \
181 do { __raw_writeb(val, portaddr(port, reg)); } while(0)
182
183#define wr_regl(port, reg, val) \
184 do { __raw_writel(val, portaddr(port, reg)); } while(0)
185
186/* macros to change one thing to another */
187
188#define tx_enabled(port) ((port)->unused[0])
189#define rx_enabled(port) ((port)->unused[1])
190
191/* flag to ignore all characters comming in */
192#define RXSTAT_DUMMY_READ (0x10000000)
193
194static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
195{
196 return container_of(port, struct s3c24xx_uart_port, port);
197}
198
199/* translate a port to the device name */
200
Ben Dooksd9dc5802005-06-23 21:56:46 +0100201static inline const char *s3c24xx_serial_portname(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700202{
203 return to_platform_device(port->dev)->name;
204}
205
206static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
207{
208 return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE);
209}
210
211static void s3c24xx_serial_rx_enable(struct uart_port *port)
212{
213 unsigned long flags;
214 unsigned int ucon, ufcon;
215 int count = 10000;
216
217 spin_lock_irqsave(&port->lock, flags);
218
219 while (--count && !s3c24xx_serial_txempty_nofifo(port))
220 udelay(100);
221
222 ufcon = rd_regl(port, S3C2410_UFCON);
223 ufcon |= S3C2410_UFCON_RESETRX;
224 wr_regl(port, S3C2410_UFCON, ufcon);
225
226 ucon = rd_regl(port, S3C2410_UCON);
227 ucon |= S3C2410_UCON_RXIRQMODE;
228 wr_regl(port, S3C2410_UCON, ucon);
229
230 rx_enabled(port) = 1;
231 spin_unlock_irqrestore(&port->lock, flags);
232}
233
234static void s3c24xx_serial_rx_disable(struct uart_port *port)
235{
236 unsigned long flags;
237 unsigned int ucon;
238
239 spin_lock_irqsave(&port->lock, flags);
240
241 ucon = rd_regl(port, S3C2410_UCON);
242 ucon &= ~S3C2410_UCON_RXIRQMODE;
243 wr_regl(port, S3C2410_UCON, ucon);
244
245 rx_enabled(port) = 0;
246 spin_unlock_irqrestore(&port->lock, flags);
247}
248
Russell Kingb129a8c2005-08-31 10:12:14 +0100249static void s3c24xx_serial_stop_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700250{
251 if (tx_enabled(port)) {
252 disable_irq(TX_IRQ(port));
253 tx_enabled(port) = 0;
254 if (port->flags & UPF_CONS_FLOW)
255 s3c24xx_serial_rx_enable(port);
256 }
257}
258
Russell Kingb129a8c2005-08-31 10:12:14 +0100259static void s3c24xx_serial_start_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700260{
261 if (!tx_enabled(port)) {
262 if (port->flags & UPF_CONS_FLOW)
263 s3c24xx_serial_rx_disable(port);
264
265 enable_irq(TX_IRQ(port));
266 tx_enabled(port) = 1;
267 }
268}
269
270
271static void s3c24xx_serial_stop_rx(struct uart_port *port)
272{
273 if (rx_enabled(port)) {
274 dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
275 disable_irq(RX_IRQ(port));
276 rx_enabled(port) = 0;
277 }
278}
279
280static void s3c24xx_serial_enable_ms(struct uart_port *port)
281{
282}
283
284static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port)
285{
286 return to_ourport(port)->info;
287}
288
289static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
290{
291 if (port->dev == NULL)
292 return NULL;
293
294 return (struct s3c2410_uartcfg *)port->dev->platform_data;
295}
296
297static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
298 unsigned long ufstat)
299{
300 struct s3c24xx_uart_info *info = ourport->info;
301
302 if (ufstat & info->rx_fifofull)
303 return info->fifosize;
304
305 return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
306}
307
308
309/* ? - where has parity gone?? */
310#define S3C2410_UERSTAT_PARITY (0x1000)
311
312static irqreturn_t
David Howells7d12e782006-10-05 14:55:46 +0100313s3c24xx_serial_rx_chars(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700314{
315 struct s3c24xx_uart_port *ourport = dev_id;
316 struct uart_port *port = &ourport->port;
317 struct tty_struct *tty = port->info->tty;
318 unsigned int ufcon, ch, flag, ufstat, uerstat;
319 int max_count = 64;
320
321 while (max_count-- > 0) {
322 ufcon = rd_regl(port, S3C2410_UFCON);
323 ufstat = rd_regl(port, S3C2410_UFSTAT);
324
325 if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
326 break;
327
Linus Torvalds1da177e2005-04-16 15:20:36 -0700328 uerstat = rd_regl(port, S3C2410_UERSTAT);
329 ch = rd_regb(port, S3C2410_URXH);
330
331 if (port->flags & UPF_CONS_FLOW) {
332 int txe = s3c24xx_serial_txempty_nofifo(port);
333
334 if (rx_enabled(port)) {
335 if (!txe) {
336 rx_enabled(port) = 0;
337 continue;
338 }
339 } else {
340 if (txe) {
341 ufcon |= S3C2410_UFCON_RESETRX;
342 wr_regl(port, S3C2410_UFCON, ufcon);
343 rx_enabled(port) = 1;
344 goto out;
345 }
346 continue;
347 }
348 }
349
350 /* insert the character into the buffer */
351
352 flag = TTY_NORMAL;
353 port->icount.rx++;
354
Russell King45849282005-04-26 15:29:44 +0100355 if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700356 dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
357 ch, uerstat);
358
359 /* check for break */
360 if (uerstat & S3C2410_UERSTAT_BREAK) {
361 dbg("break!\n");
362 port->icount.brk++;
363 if (uart_handle_break(port))
364 goto ignore_char;
365 }
366
367 if (uerstat & S3C2410_UERSTAT_FRAME)
368 port->icount.frame++;
369 if (uerstat & S3C2410_UERSTAT_OVERRUN)
370 port->icount.overrun++;
371
372 uerstat &= port->read_status_mask;
373
374 if (uerstat & S3C2410_UERSTAT_BREAK)
375 flag = TTY_BREAK;
376 else if (uerstat & S3C2410_UERSTAT_PARITY)
377 flag = TTY_PARITY;
378 else if (uerstat & ( S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_OVERRUN))
379 flag = TTY_FRAME;
380 }
381
David Howells7d12e782006-10-05 14:55:46 +0100382 if (uart_handle_sysrq_char(port, ch))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700383 goto ignore_char;
384
Russell King05ab3012005-05-09 23:21:59 +0100385 uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, ch, flag);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700386
387 ignore_char:
388 continue;
389 }
390 tty_flip_buffer_push(tty);
391
392 out:
393 return IRQ_HANDLED;
394}
395
David Howells7d12e782006-10-05 14:55:46 +0100396static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700397{
398 struct s3c24xx_uart_port *ourport = id;
399 struct uart_port *port = &ourport->port;
400 struct circ_buf *xmit = &port->info->xmit;
401 int count = 256;
402
403 if (port->x_char) {
404 wr_regb(port, S3C2410_UTXH, port->x_char);
405 port->icount.tx++;
406 port->x_char = 0;
407 goto out;
408 }
409
410 /* if there isnt anything more to transmit, or the uart is now
411 * stopped, disable the uart and exit
412 */
413
414 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
Russell Kingb129a8c2005-08-31 10:12:14 +0100415 s3c24xx_serial_stop_tx(port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700416 goto out;
417 }
418
419 /* try and drain the buffer... */
420
421 while (!uart_circ_empty(xmit) && count-- > 0) {
422 if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
423 break;
424
425 wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
426 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
427 port->icount.tx++;
428 }
429
430 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
431 uart_write_wakeup(port);
432
433 if (uart_circ_empty(xmit))
Russell Kingb129a8c2005-08-31 10:12:14 +0100434 s3c24xx_serial_stop_tx(port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700435
436 out:
437 return IRQ_HANDLED;
438}
439
440static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
441{
442 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
443 unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
444 unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
445
446 if (ufcon & S3C2410_UFCON_FIFOMODE) {
447 if ((ufstat & info->tx_fifomask) != 0 ||
448 (ufstat & info->tx_fifofull))
449 return 0;
450
451 return 1;
452 }
453
454 return s3c24xx_serial_txempty_nofifo(port);
455}
456
457/* no modem control lines */
458static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
459{
460 unsigned int umstat = rd_regb(port,S3C2410_UMSTAT);
461
462 if (umstat & S3C2410_UMSTAT_CTS)
463 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
464 else
465 return TIOCM_CAR | TIOCM_DSR;
466}
467
468static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
469{
470 /* todo - possibly remove AFC and do manual CTS */
471}
472
473static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
474{
475 unsigned long flags;
476 unsigned int ucon;
477
478 spin_lock_irqsave(&port->lock, flags);
479
480 ucon = rd_regl(port, S3C2410_UCON);
481
482 if (break_state)
483 ucon |= S3C2410_UCON_SBREAK;
484 else
485 ucon &= ~S3C2410_UCON_SBREAK;
486
487 wr_regl(port, S3C2410_UCON, ucon);
488
489 spin_unlock_irqrestore(&port->lock, flags);
490}
491
492static void s3c24xx_serial_shutdown(struct uart_port *port)
493{
494 struct s3c24xx_uart_port *ourport = to_ourport(port);
495
496 if (ourport->tx_claimed) {
497 free_irq(TX_IRQ(port), ourport);
498 tx_enabled(port) = 0;
499 ourport->tx_claimed = 0;
500 }
501
502 if (ourport->rx_claimed) {
503 free_irq(RX_IRQ(port), ourport);
504 ourport->rx_claimed = 0;
505 rx_enabled(port) = 0;
506 }
507}
508
509
510static int s3c24xx_serial_startup(struct uart_port *port)
511{
512 struct s3c24xx_uart_port *ourport = to_ourport(port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700513 int ret;
514
515 dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
516 port->mapbase, port->membase);
517
Linus Torvalds1da177e2005-04-16 15:20:36 -0700518 rx_enabled(port) = 1;
519
520 ret = request_irq(RX_IRQ(port),
521 s3c24xx_serial_rx_chars, 0,
522 s3c24xx_serial_portname(port), ourport);
523
524 if (ret != 0) {
525 printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port));
526 return ret;
527 }
528
529 ourport->rx_claimed = 1;
530
531 dbg("requesting tx irq...\n");
532
533 tx_enabled(port) = 1;
534
535 ret = request_irq(TX_IRQ(port),
536 s3c24xx_serial_tx_chars, 0,
537 s3c24xx_serial_portname(port), ourport);
538
539 if (ret) {
540 printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port));
541 goto err;
542 }
543
544 ourport->tx_claimed = 1;
545
546 dbg("s3c24xx_serial_startup ok\n");
547
548 /* the port reset code should have done the correct
549 * register setup for the port controls */
550
Linus Torvalds1da177e2005-04-16 15:20:36 -0700551 return ret;
552
553 err:
554 s3c24xx_serial_shutdown(port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700555 return ret;
556}
557
558/* power power management control */
559
560static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
561 unsigned int old)
562{
563 struct s3c24xx_uart_port *ourport = to_ourport(port);
564
565 switch (level) {
566 case 3:
567 if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
568 clk_disable(ourport->baudclk);
569
570 clk_disable(ourport->clk);
571 break;
572
573 case 0:
574 clk_enable(ourport->clk);
575
576 if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
577 clk_enable(ourport->baudclk);
578
579 break;
580 default:
581 printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level);
582 }
583}
584
585/* baud rate calculation
586 *
587 * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
588 * of different sources, including the peripheral clock ("pclk") and an
589 * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
590 * with a programmable extra divisor.
591 *
592 * The following code goes through the clock sources, and calculates the
593 * baud clocks (and the resultant actual baud rates) and then tries to
594 * pick the closest one and select that.
595 *
596*/
597
598
599#define MAX_CLKS (8)
600
601static struct s3c24xx_uart_clksrc tmp_clksrc = {
602 .name = "pclk",
603 .min_baud = 0,
604 .max_baud = 0,
605 .divisor = 1,
606};
607
608static inline int
609s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
610{
611 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
612
613 return (info->get_clksrc)(port, c);
614}
615
616static inline int
617s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
618{
619 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
620
621 return (info->set_clksrc)(port, c);
622}
623
624struct baud_calc {
625 struct s3c24xx_uart_clksrc *clksrc;
626 unsigned int calc;
627 unsigned int quot;
628 struct clk *src;
629};
630
631static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
632 struct uart_port *port,
633 struct s3c24xx_uart_clksrc *clksrc,
634 unsigned int baud)
635{
636 unsigned long rate;
637
638 calc->src = clk_get(port->dev, clksrc->name);
639 if (calc->src == NULL || IS_ERR(calc->src))
640 return 0;
641
642 rate = clk_get_rate(calc->src);
643 rate /= clksrc->divisor;
644
645 calc->clksrc = clksrc;
646 calc->quot = (rate + (8 * baud)) / (16 * baud);
647 calc->calc = (rate / (calc->quot * 16));
648
649 calc->quot--;
650 return 1;
651}
652
653static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
654 struct s3c24xx_uart_clksrc **clksrc,
655 struct clk **clk,
656 unsigned int baud)
657{
658 struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
659 struct s3c24xx_uart_clksrc *clkp;
660 struct baud_calc res[MAX_CLKS];
661 struct baud_calc *resptr, *best, *sptr;
662 int i;
663
664 clkp = cfg->clocks;
665 best = NULL;
666
667 if (cfg->clocks_size < 2) {
668 if (cfg->clocks_size == 0)
669 clkp = &tmp_clksrc;
670
671 /* check to see if we're sourcing fclk, and if so we're
672 * going to have to update the clock source
673 */
674
675 if (strcmp(clkp->name, "fclk") == 0) {
676 struct s3c24xx_uart_clksrc src;
677
678 s3c24xx_serial_getsource(port, &src);
679
680 /* check that the port already using fclk, and if
681 * not, then re-select fclk
682 */
683
684 if (strcmp(src.name, clkp->name) == 0) {
685 s3c24xx_serial_setsource(port, clkp);
686 s3c24xx_serial_getsource(port, &src);
687 }
688
689 clkp->divisor = src.divisor;
690 }
691
692 s3c24xx_serial_calcbaud(res, port, clkp, baud);
693 best = res;
694 resptr = best + 1;
695 } else {
696 resptr = res;
697
698 for (i = 0; i < cfg->clocks_size; i++, clkp++) {
699 if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
700 resptr++;
701 }
702 }
703
704 /* ok, we now need to select the best clock we found */
705
706 if (!best) {
707 unsigned int deviation = (1<<30)|((1<<30)-1);
708 int calc_deviation;
709
710 for (sptr = res; sptr < resptr; sptr++) {
711 printk(KERN_DEBUG
712 "found clk %p (%s) quot %d, calc %d\n",
713 sptr->clksrc, sptr->clksrc->name,
714 sptr->quot, sptr->calc);
715
716 calc_deviation = baud - sptr->calc;
717 if (calc_deviation < 0)
718 calc_deviation = -calc_deviation;
719
720 if (calc_deviation < deviation) {
721 best = sptr;
722 deviation = calc_deviation;
723 }
724 }
725
726 printk(KERN_DEBUG "best %p (deviation %d)\n", best, deviation);
727 }
728
729 printk(KERN_DEBUG "selected clock %p (%s) quot %d, calc %d\n",
730 best->clksrc, best->clksrc->name, best->quot, best->calc);
731
732 /* store results to pass back */
733
734 *clksrc = best->clksrc;
735 *clk = best->src;
736
737 return best->quot;
738}
739
740static void s3c24xx_serial_set_termios(struct uart_port *port,
Alan Cox606d0992006-12-08 02:38:45 -0800741 struct ktermios *termios,
742 struct ktermios *old)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700743{
744 struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
745 struct s3c24xx_uart_port *ourport = to_ourport(port);
Ben Dooksf04da5d2005-09-25 23:02:49 +0100746 struct s3c24xx_uart_clksrc *clksrc = NULL;
747 struct clk *clk = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700748 unsigned long flags;
749 unsigned int baud, quot;
750 unsigned int ulcon;
751 unsigned int umcon;
752
753 /*
754 * We don't support modem control lines.
755 */
756 termios->c_cflag &= ~(HUPCL | CMSPAR);
757 termios->c_cflag |= CLOCAL;
758
759 /*
760 * Ask the core to calculate the divisor for us.
761 */
762
763 baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
764
765 if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
766 quot = port->custom_divisor;
767 else
768 quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
769
770 /* check to see if we need to change clock source */
771
772 if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
773 s3c24xx_serial_setsource(port, clksrc);
774
775 if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
776 clk_disable(ourport->baudclk);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700777 ourport->baudclk = NULL;
778 }
779
Linus Torvalds1da177e2005-04-16 15:20:36 -0700780 clk_enable(clk);
781
782 ourport->clksrc = clksrc;
783 ourport->baudclk = clk;
784 }
785
786 switch (termios->c_cflag & CSIZE) {
787 case CS5:
788 dbg("config: 5bits/char\n");
789 ulcon = S3C2410_LCON_CS5;
790 break;
791 case CS6:
792 dbg("config: 6bits/char\n");
793 ulcon = S3C2410_LCON_CS6;
794 break;
795 case CS7:
796 dbg("config: 7bits/char\n");
797 ulcon = S3C2410_LCON_CS7;
798 break;
799 case CS8:
800 default:
801 dbg("config: 8bits/char\n");
802 ulcon = S3C2410_LCON_CS8;
803 break;
804 }
805
806 /* preserve original lcon IR settings */
807 ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
808
809 if (termios->c_cflag & CSTOPB)
810 ulcon |= S3C2410_LCON_STOPB;
811
812 umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
813
814 if (termios->c_cflag & PARENB) {
815 if (termios->c_cflag & PARODD)
816 ulcon |= S3C2410_LCON_PODD;
817 else
818 ulcon |= S3C2410_LCON_PEVEN;
819 } else {
820 ulcon |= S3C2410_LCON_PNONE;
821 }
822
823 spin_lock_irqsave(&port->lock, flags);
824
825 dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
826
827 wr_regl(port, S3C2410_ULCON, ulcon);
828 wr_regl(port, S3C2410_UBRDIV, quot);
829 wr_regl(port, S3C2410_UMCON, umcon);
830
831 dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
832 rd_regl(port, S3C2410_ULCON),
833 rd_regl(port, S3C2410_UCON),
834 rd_regl(port, S3C2410_UFCON));
835
836 /*
837 * Update the per-port timeout.
838 */
839 uart_update_timeout(port, termios->c_cflag, baud);
840
841 /*
842 * Which character status flags are we interested in?
843 */
844 port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
845 if (termios->c_iflag & INPCK)
846 port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY;
847
848 /*
849 * Which character status flags should we ignore?
850 */
851 port->ignore_status_mask = 0;
852 if (termios->c_iflag & IGNPAR)
853 port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
854 if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
855 port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
856
857 /*
858 * Ignore all characters if CREAD is not set.
859 */
860 if ((termios->c_cflag & CREAD) == 0)
861 port->ignore_status_mask |= RXSTAT_DUMMY_READ;
862
863 spin_unlock_irqrestore(&port->lock, flags);
864}
865
866static const char *s3c24xx_serial_type(struct uart_port *port)
867{
868 switch (port->type) {
869 case PORT_S3C2410:
870 return "S3C2410";
871 case PORT_S3C2440:
872 return "S3C2440";
Ben Dooks73e55cb2006-06-24 21:21:32 +0100873 case PORT_S3C2412:
874 return "S3C2412";
Linus Torvalds1da177e2005-04-16 15:20:36 -0700875 default:
876 return NULL;
877 }
878}
879
880#define MAP_SIZE (0x100)
881
882static void s3c24xx_serial_release_port(struct uart_port *port)
883{
884 release_mem_region(port->mapbase, MAP_SIZE);
885}
886
887static int s3c24xx_serial_request_port(struct uart_port *port)
888{
Ben Dooksd9dc5802005-06-23 21:56:46 +0100889 const char *name = s3c24xx_serial_portname(port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700890 return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY;
891}
892
893static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
894{
895 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
896
897 if (flags & UART_CONFIG_TYPE &&
898 s3c24xx_serial_request_port(port) == 0)
899 port->type = info->type;
900}
901
902/*
903 * verify the new serial_struct (for TIOCSSERIAL).
904 */
905static int
906s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
907{
908 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
909
910 if (ser->type != PORT_UNKNOWN && ser->type != info->type)
911 return -EINVAL;
912
913 return 0;
914}
915
916
917#ifdef CONFIG_SERIAL_S3C2410_CONSOLE
918
919static struct console s3c24xx_serial_console;
920
921#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
922#else
923#define S3C24XX_SERIAL_CONSOLE NULL
924#endif
925
926static struct uart_ops s3c24xx_serial_ops = {
927 .pm = s3c24xx_serial_pm,
928 .tx_empty = s3c24xx_serial_tx_empty,
929 .get_mctrl = s3c24xx_serial_get_mctrl,
930 .set_mctrl = s3c24xx_serial_set_mctrl,
931 .stop_tx = s3c24xx_serial_stop_tx,
932 .start_tx = s3c24xx_serial_start_tx,
933 .stop_rx = s3c24xx_serial_stop_rx,
934 .enable_ms = s3c24xx_serial_enable_ms,
935 .break_ctl = s3c24xx_serial_break_ctl,
936 .startup = s3c24xx_serial_startup,
937 .shutdown = s3c24xx_serial_shutdown,
938 .set_termios = s3c24xx_serial_set_termios,
939 .type = s3c24xx_serial_type,
940 .release_port = s3c24xx_serial_release_port,
941 .request_port = s3c24xx_serial_request_port,
942 .config_port = s3c24xx_serial_config_port,
943 .verify_port = s3c24xx_serial_verify_port,
944};
945
946
947static struct uart_driver s3c24xx_uart_drv = {
948 .owner = THIS_MODULE,
949 .dev_name = "s3c2410_serial",
950 .nr = 3,
951 .cons = S3C24XX_SERIAL_CONSOLE,
952 .driver_name = S3C24XX_SERIAL_NAME,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700953 .major = S3C24XX_SERIAL_MAJOR,
954 .minor = S3C24XX_SERIAL_MINOR,
955};
956
957static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
958 [0] = {
959 .port = {
Milind Arun Choudhary076fa0f2007-05-08 00:30:10 -0700960 .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
Linus Torvalds1da177e2005-04-16 15:20:36 -0700961 .iotype = UPIO_MEM,
962 .irq = IRQ_S3CUART_RX0,
963 .uartclk = 0,
964 .fifosize = 16,
965 .ops = &s3c24xx_serial_ops,
966 .flags = UPF_BOOT_AUTOCONF,
967 .line = 0,
968 }
969 },
970 [1] = {
971 .port = {
Milind Arun Choudhary076fa0f2007-05-08 00:30:10 -0700972 .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock),
Linus Torvalds1da177e2005-04-16 15:20:36 -0700973 .iotype = UPIO_MEM,
974 .irq = IRQ_S3CUART_RX1,
975 .uartclk = 0,
976 .fifosize = 16,
977 .ops = &s3c24xx_serial_ops,
978 .flags = UPF_BOOT_AUTOCONF,
979 .line = 1,
980 }
981 },
982#if NR_PORTS > 2
983
984 [2] = {
985 .port = {
Milind Arun Choudhary076fa0f2007-05-08 00:30:10 -0700986 .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock),
Linus Torvalds1da177e2005-04-16 15:20:36 -0700987 .iotype = UPIO_MEM,
988 .irq = IRQ_S3CUART_RX2,
989 .uartclk = 0,
990 .fifosize = 16,
991 .ops = &s3c24xx_serial_ops,
992 .flags = UPF_BOOT_AUTOCONF,
993 .line = 2,
994 }
995 }
996#endif
997};
998
999/* s3c24xx_serial_resetport
1000 *
1001 * wrapper to call the specific reset for this port (reset the fifos
1002 * and the settings)
1003*/
1004
1005static inline int s3c24xx_serial_resetport(struct uart_port * port,
1006 struct s3c2410_uartcfg *cfg)
1007{
1008 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1009
1010 return (info->reset_port)(port, cfg);
1011}
1012
1013/* s3c24xx_serial_init_port
1014 *
1015 * initialise a single serial port from the platform device given
1016 */
1017
1018static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
1019 struct s3c24xx_uart_info *info,
1020 struct platform_device *platdev)
1021{
1022 struct uart_port *port = &ourport->port;
1023 struct s3c2410_uartcfg *cfg;
1024 struct resource *res;
1025
1026 dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
1027
1028 if (platdev == NULL)
1029 return -ENODEV;
1030
1031 cfg = s3c24xx_dev_to_cfg(&platdev->dev);
1032
1033 if (port->mapbase != 0)
1034 return 0;
1035
1036 if (cfg->hwport > 3)
1037 return -EINVAL;
1038
1039 /* setup info for port */
1040 port->dev = &platdev->dev;
1041 ourport->info = info;
1042
1043 /* copy the info in from provided structure */
1044 ourport->port.fifosize = info->fifosize;
1045
1046 dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
1047
1048 port->uartclk = 1;
1049
1050 if (cfg->uart_flags & UPF_CONS_FLOW) {
1051 dbg("s3c24xx_serial_init_port: enabling flow control\n");
1052 port->flags |= UPF_CONS_FLOW;
1053 }
1054
1055 /* sort our the physical and virtual addresses for each UART */
1056
1057 res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
1058 if (res == NULL) {
1059 printk(KERN_ERR "failed to find memory resource for uart\n");
1060 return -EINVAL;
1061 }
1062
1063 dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
1064
1065 port->mapbase = res->start;
Lucas Correia Villa Real0367a8d2006-01-26 15:20:50 +00001066 port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001067 port->irq = platform_get_irq(platdev, 0);
David Vrabel48944732006-01-19 17:56:29 +00001068 if (port->irq < 0)
1069 port->irq = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001070
1071 ourport->clk = clk_get(&platdev->dev, "uart");
1072
Linus Torvalds1da177e2005-04-16 15:20:36 -07001073 dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
1074 port->mapbase, port->membase, port->irq, port->uartclk);
1075
1076 /* reset the fifos (and setup the uart) */
1077 s3c24xx_serial_resetport(port, cfg);
1078 return 0;
1079}
1080
1081/* Device driver serial port probe */
1082
1083static int probe_index = 0;
1084
Russell King3ae5eae2005-11-09 22:32:44 +00001085static int s3c24xx_serial_probe(struct platform_device *dev,
Ben Dooks17efa642005-10-12 19:58:06 +01001086 struct s3c24xx_uart_info *info)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001087{
1088 struct s3c24xx_uart_port *ourport;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001089 int ret;
1090
Russell King3ae5eae2005-11-09 22:32:44 +00001091 dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001092
1093 ourport = &s3c24xx_serial_ports[probe_index];
1094 probe_index++;
1095
1096 dbg("%s: initialising port %p...\n", __FUNCTION__, ourport);
1097
1098 ret = s3c24xx_serial_init_port(ourport, info, dev);
1099 if (ret < 0)
1100 goto probe_err;
1101
1102 dbg("%s: adding port\n", __FUNCTION__);
1103 uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
Russell King3ae5eae2005-11-09 22:32:44 +00001104 platform_set_drvdata(dev, &ourport->port);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001105
1106 return 0;
1107
1108 probe_err:
1109 return ret;
1110}
1111
Russell King3ae5eae2005-11-09 22:32:44 +00001112static int s3c24xx_serial_remove(struct platform_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001113{
Russell King3ae5eae2005-11-09 22:32:44 +00001114 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001115
1116 if (port)
1117 uart_remove_one_port(&s3c24xx_uart_drv, port);
1118
1119 return 0;
1120}
1121
1122/* UART power management code */
1123
1124#ifdef CONFIG_PM
1125
Russell King3ae5eae2005-11-09 22:32:44 +00001126static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001127{
Russell King3ae5eae2005-11-09 22:32:44 +00001128 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001129
Russell King9480e302005-10-28 09:52:56 -07001130 if (port)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001131 uart_suspend_port(&s3c24xx_uart_drv, port);
1132
1133 return 0;
1134}
1135
Russell King3ae5eae2005-11-09 22:32:44 +00001136static int s3c24xx_serial_resume(struct platform_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001137{
Russell King3ae5eae2005-11-09 22:32:44 +00001138 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001139 struct s3c24xx_uart_port *ourport = to_ourport(port);
1140
Russell King9480e302005-10-28 09:52:56 -07001141 if (port) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001142 clk_enable(ourport->clk);
1143 s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
1144 clk_disable(ourport->clk);
1145
1146 uart_resume_port(&s3c24xx_uart_drv, port);
1147 }
1148
1149 return 0;
1150}
1151
1152#else
1153#define s3c24xx_serial_suspend NULL
1154#define s3c24xx_serial_resume NULL
1155#endif
1156
Russell King3ae5eae2005-11-09 22:32:44 +00001157static int s3c24xx_serial_init(struct platform_driver *drv,
Ben Dooks17efa642005-10-12 19:58:06 +01001158 struct s3c24xx_uart_info *info)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001159{
1160 dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
Russell King3ae5eae2005-11-09 22:32:44 +00001161 return platform_driver_register(drv);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001162}
1163
1164
1165/* now comes the code to initialise either the s3c2410 or s3c2440 serial
1166 * port information
1167*/
1168
1169/* cpu specific variations on the serial port support */
1170
1171#ifdef CONFIG_CPU_S3C2400
1172
1173static int s3c2400_serial_getsource(struct uart_port *port,
1174 struct s3c24xx_uart_clksrc *clk)
1175{
1176 clk->divisor = 1;
1177 clk->name = "pclk";
1178
1179 return 0;
1180}
1181
1182static int s3c2400_serial_setsource(struct uart_port *port,
1183 struct s3c24xx_uart_clksrc *clk)
1184{
1185 return 0;
1186}
1187
1188static int s3c2400_serial_resetport(struct uart_port *port,
1189 struct s3c2410_uartcfg *cfg)
1190{
1191 dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n",
1192 port, port->mapbase, cfg);
1193
1194 wr_regl(port, S3C2410_UCON, cfg->ucon);
1195 wr_regl(port, S3C2410_ULCON, cfg->ulcon);
1196
1197 /* reset both fifos */
1198
1199 wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
1200 wr_regl(port, S3C2410_UFCON, cfg->ufcon);
1201
1202 return 0;
1203}
1204
1205static struct s3c24xx_uart_info s3c2400_uart_inf = {
1206 .name = "Samsung S3C2400 UART",
1207 .type = PORT_S3C2400,
1208 .fifosize = 16,
1209 .rx_fifomask = S3C2410_UFSTAT_RXMASK,
1210 .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
1211 .rx_fifofull = S3C2410_UFSTAT_RXFULL,
1212 .tx_fifofull = S3C2410_UFSTAT_TXFULL,
1213 .tx_fifomask = S3C2410_UFSTAT_TXMASK,
1214 .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
1215 .get_clksrc = s3c2400_serial_getsource,
1216 .set_clksrc = s3c2400_serial_setsource,
1217 .reset_port = s3c2400_serial_resetport,
1218};
1219
Russell King3ae5eae2005-11-09 22:32:44 +00001220static int s3c2400_serial_probe(struct platform_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001221{
1222 return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
1223}
1224
Russell King3ae5eae2005-11-09 22:32:44 +00001225static struct platform_driver s3c2400_serial_drv = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001226 .probe = s3c2400_serial_probe,
1227 .remove = s3c24xx_serial_remove,
1228 .suspend = s3c24xx_serial_suspend,
1229 .resume = s3c24xx_serial_resume,
Russell King3ae5eae2005-11-09 22:32:44 +00001230 .driver = {
1231 .name = "s3c2400-uart",
1232 .owner = THIS_MODULE,
1233 },
Linus Torvalds1da177e2005-04-16 15:20:36 -07001234};
1235
1236static inline int s3c2400_serial_init(void)
1237{
1238 return s3c24xx_serial_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
1239}
1240
1241static inline void s3c2400_serial_exit(void)
1242{
Russell King3ae5eae2005-11-09 22:32:44 +00001243 platform_driver_unregister(&s3c2400_serial_drv);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001244}
1245
1246#define s3c2400_uart_inf_at &s3c2400_uart_inf
1247#else
1248
1249static inline int s3c2400_serial_init(void)
1250{
1251 return 0;
1252}
1253
1254static inline void s3c2400_serial_exit(void)
1255{
1256}
1257
1258#define s3c2400_uart_inf_at NULL
1259
1260#endif /* CONFIG_CPU_S3C2400 */
1261
1262/* S3C2410 support */
1263
1264#ifdef CONFIG_CPU_S3C2410
1265
1266static int s3c2410_serial_setsource(struct uart_port *port,
1267 struct s3c24xx_uart_clksrc *clk)
1268{
1269 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1270
1271 if (strcmp(clk->name, "uclk") == 0)
1272 ucon |= S3C2410_UCON_UCLK;
1273 else
1274 ucon &= ~S3C2410_UCON_UCLK;
1275
1276 wr_regl(port, S3C2410_UCON, ucon);
1277 return 0;
1278}
1279
1280static int s3c2410_serial_getsource(struct uart_port *port,
1281 struct s3c24xx_uart_clksrc *clk)
1282{
1283 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1284
1285 clk->divisor = 1;
1286 clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
1287
1288 return 0;
1289}
1290
1291static int s3c2410_serial_resetport(struct uart_port *port,
1292 struct s3c2410_uartcfg *cfg)
1293{
1294 dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n",
1295 port, port->mapbase, cfg);
1296
1297 wr_regl(port, S3C2410_UCON, cfg->ucon);
1298 wr_regl(port, S3C2410_ULCON, cfg->ulcon);
1299
1300 /* reset both fifos */
1301
1302 wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
1303 wr_regl(port, S3C2410_UFCON, cfg->ufcon);
1304
1305 return 0;
1306}
1307
1308static struct s3c24xx_uart_info s3c2410_uart_inf = {
1309 .name = "Samsung S3C2410 UART",
1310 .type = PORT_S3C2410,
1311 .fifosize = 16,
1312 .rx_fifomask = S3C2410_UFSTAT_RXMASK,
1313 .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
1314 .rx_fifofull = S3C2410_UFSTAT_RXFULL,
1315 .tx_fifofull = S3C2410_UFSTAT_TXFULL,
1316 .tx_fifomask = S3C2410_UFSTAT_TXMASK,
1317 .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
1318 .get_clksrc = s3c2410_serial_getsource,
1319 .set_clksrc = s3c2410_serial_setsource,
1320 .reset_port = s3c2410_serial_resetport,
1321};
1322
1323/* device management */
1324
Russell King3ae5eae2005-11-09 22:32:44 +00001325static int s3c2410_serial_probe(struct platform_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001326{
1327 return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
1328}
1329
Russell King3ae5eae2005-11-09 22:32:44 +00001330static struct platform_driver s3c2410_serial_drv = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001331 .probe = s3c2410_serial_probe,
1332 .remove = s3c24xx_serial_remove,
1333 .suspend = s3c24xx_serial_suspend,
1334 .resume = s3c24xx_serial_resume,
Russell King3ae5eae2005-11-09 22:32:44 +00001335 .driver = {
1336 .name = "s3c2410-uart",
1337 .owner = THIS_MODULE,
1338 },
Linus Torvalds1da177e2005-04-16 15:20:36 -07001339};
1340
1341static inline int s3c2410_serial_init(void)
1342{
1343 return s3c24xx_serial_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
1344}
1345
1346static inline void s3c2410_serial_exit(void)
1347{
Russell King3ae5eae2005-11-09 22:32:44 +00001348 platform_driver_unregister(&s3c2410_serial_drv);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001349}
1350
1351#define s3c2410_uart_inf_at &s3c2410_uart_inf
1352#else
1353
1354static inline int s3c2410_serial_init(void)
1355{
1356 return 0;
1357}
1358
1359static inline void s3c2410_serial_exit(void)
1360{
1361}
1362
1363#define s3c2410_uart_inf_at NULL
1364
1365#endif /* CONFIG_CPU_S3C2410 */
1366
Ben Dooks96ce2382006-06-18 23:06:41 +01001367#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001368
1369static int s3c2440_serial_setsource(struct uart_port *port,
1370 struct s3c24xx_uart_clksrc *clk)
1371{
1372 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1373
1374 // todo - proper fclk<>nonfclk switch //
1375
1376 ucon &= ~S3C2440_UCON_CLKMASK;
1377
1378 if (strcmp(clk->name, "uclk") == 0)
1379 ucon |= S3C2440_UCON_UCLK;
1380 else if (strcmp(clk->name, "pclk") == 0)
1381 ucon |= S3C2440_UCON_PCLK;
1382 else if (strcmp(clk->name, "fclk") == 0)
1383 ucon |= S3C2440_UCON_FCLK;
1384 else {
1385 printk(KERN_ERR "unknown clock source %s\n", clk->name);
1386 return -EINVAL;
1387 }
1388
1389 wr_regl(port, S3C2410_UCON, ucon);
1390 return 0;
1391}
1392
1393
1394static int s3c2440_serial_getsource(struct uart_port *port,
1395 struct s3c24xx_uart_clksrc *clk)
1396{
1397 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1398 unsigned long ucon0, ucon1, ucon2;
1399
1400 switch (ucon & S3C2440_UCON_CLKMASK) {
1401 case S3C2440_UCON_UCLK:
1402 clk->divisor = 1;
1403 clk->name = "uclk";
1404 break;
1405
1406 case S3C2440_UCON_PCLK:
1407 case S3C2440_UCON_PCLK2:
1408 clk->divisor = 1;
1409 clk->name = "pclk";
1410 break;
1411
1412 case S3C2440_UCON_FCLK:
1413 /* the fun of calculating the uart divisors on
1414 * the s3c2440 */
1415
1416 ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
1417 ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
1418 ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
1419
1420 printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2);
1421
1422 ucon0 &= S3C2440_UCON0_DIVMASK;
1423 ucon1 &= S3C2440_UCON1_DIVMASK;
1424 ucon2 &= S3C2440_UCON2_DIVMASK;
1425
1426 if (ucon0 != 0) {
1427 clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT;
1428 clk->divisor += 6;
1429 } else if (ucon1 != 0) {
1430 clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT;
1431 clk->divisor += 21;
1432 } else if (ucon2 != 0) {
1433 clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT;
1434 clk->divisor += 36;
1435 } else {
1436 /* manual calims 44, seems to be 9 */
1437 clk->divisor = 9;
1438 }
1439
1440 clk->name = "fclk";
1441 break;
1442 }
1443
1444 return 0;
1445}
1446
1447static int s3c2440_serial_resetport(struct uart_port *port,
1448 struct s3c2410_uartcfg *cfg)
1449{
1450 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1451
1452 dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n",
1453 port, port->mapbase, cfg);
1454
1455 /* ensure we don't change the clock settings... */
1456
1457 ucon &= (S3C2440_UCON0_DIVMASK | (3<<10));
1458
1459 wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
1460 wr_regl(port, S3C2410_ULCON, cfg->ulcon);
1461
1462 /* reset both fifos */
1463
1464 wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
1465 wr_regl(port, S3C2410_UFCON, cfg->ufcon);
1466
1467 return 0;
1468}
1469
1470static struct s3c24xx_uart_info s3c2440_uart_inf = {
1471 .name = "Samsung S3C2440 UART",
1472 .type = PORT_S3C2440,
1473 .fifosize = 64,
1474 .rx_fifomask = S3C2440_UFSTAT_RXMASK,
1475 .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
1476 .rx_fifofull = S3C2440_UFSTAT_RXFULL,
1477 .tx_fifofull = S3C2440_UFSTAT_TXFULL,
1478 .tx_fifomask = S3C2440_UFSTAT_TXMASK,
1479 .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
1480 .get_clksrc = s3c2440_serial_getsource,
1481 .set_clksrc = s3c2440_serial_setsource,
1482 .reset_port = s3c2440_serial_resetport,
1483};
1484
1485/* device management */
1486
Russell King3ae5eae2005-11-09 22:32:44 +00001487static int s3c2440_serial_probe(struct platform_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001488{
1489 dbg("s3c2440_serial_probe: dev=%p\n", dev);
1490 return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
1491}
1492
Russell King3ae5eae2005-11-09 22:32:44 +00001493static struct platform_driver s3c2440_serial_drv = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001494 .probe = s3c2440_serial_probe,
1495 .remove = s3c24xx_serial_remove,
1496 .suspend = s3c24xx_serial_suspend,
1497 .resume = s3c24xx_serial_resume,
Russell King3ae5eae2005-11-09 22:32:44 +00001498 .driver = {
1499 .name = "s3c2440-uart",
1500 .owner = THIS_MODULE,
1501 },
Linus Torvalds1da177e2005-04-16 15:20:36 -07001502};
1503
1504
1505static inline int s3c2440_serial_init(void)
1506{
1507 return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
1508}
1509
1510static inline void s3c2440_serial_exit(void)
1511{
Russell King3ae5eae2005-11-09 22:32:44 +00001512 platform_driver_unregister(&s3c2440_serial_drv);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001513}
1514
1515#define s3c2440_uart_inf_at &s3c2440_uart_inf
1516#else
1517
1518static inline int s3c2440_serial_init(void)
1519{
1520 return 0;
1521}
1522
1523static inline void s3c2440_serial_exit(void)
1524{
1525}
1526
1527#define s3c2440_uart_inf_at NULL
1528#endif /* CONFIG_CPU_S3C2440 */
1529
Jiri Olsa14527502008-02-04 22:27:48 -08001530#if defined(CONFIG_CPU_S3C2412)
Ben Dooks73e55cb2006-06-24 21:21:32 +01001531
1532static int s3c2412_serial_setsource(struct uart_port *port,
1533 struct s3c24xx_uart_clksrc *clk)
1534{
1535 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1536
1537 ucon &= ~S3C2412_UCON_CLKMASK;
1538
1539 if (strcmp(clk->name, "uclk") == 0)
1540 ucon |= S3C2440_UCON_UCLK;
1541 else if (strcmp(clk->name, "pclk") == 0)
1542 ucon |= S3C2440_UCON_PCLK;
1543 else if (strcmp(clk->name, "usysclk") == 0)
1544 ucon |= S3C2412_UCON_USYSCLK;
1545 else {
1546 printk(KERN_ERR "unknown clock source %s\n", clk->name);
1547 return -EINVAL;
1548 }
1549
1550 wr_regl(port, S3C2410_UCON, ucon);
1551 return 0;
1552}
1553
1554
1555static int s3c2412_serial_getsource(struct uart_port *port,
1556 struct s3c24xx_uart_clksrc *clk)
1557{
1558 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1559
1560 switch (ucon & S3C2412_UCON_CLKMASK) {
1561 case S3C2412_UCON_UCLK:
1562 clk->divisor = 1;
1563 clk->name = "uclk";
1564 break;
1565
1566 case S3C2412_UCON_PCLK:
1567 case S3C2412_UCON_PCLK2:
1568 clk->divisor = 1;
1569 clk->name = "pclk";
1570 break;
1571
1572 case S3C2412_UCON_USYSCLK:
1573 clk->divisor = 1;
1574 clk->name = "usysclk";
1575 break;
1576 }
1577
1578 return 0;
1579}
1580
1581static int s3c2412_serial_resetport(struct uart_port *port,
1582 struct s3c2410_uartcfg *cfg)
1583{
1584 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1585
1586 dbg("%s: port=%p (%08lx), cfg=%p\n",
1587 __FUNCTION__, port, port->mapbase, cfg);
1588
1589 /* ensure we don't change the clock settings... */
1590
1591 ucon &= S3C2412_UCON_CLKMASK;
1592
1593 wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
1594 wr_regl(port, S3C2410_ULCON, cfg->ulcon);
1595
1596 /* reset both fifos */
1597
1598 wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
1599 wr_regl(port, S3C2410_UFCON, cfg->ufcon);
1600
1601 return 0;
1602}
1603
1604static struct s3c24xx_uart_info s3c2412_uart_inf = {
1605 .name = "Samsung S3C2412 UART",
1606 .type = PORT_S3C2412,
1607 .fifosize = 64,
1608 .rx_fifomask = S3C2440_UFSTAT_RXMASK,
1609 .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
1610 .rx_fifofull = S3C2440_UFSTAT_RXFULL,
1611 .tx_fifofull = S3C2440_UFSTAT_TXFULL,
1612 .tx_fifomask = S3C2440_UFSTAT_TXMASK,
1613 .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
1614 .get_clksrc = s3c2412_serial_getsource,
1615 .set_clksrc = s3c2412_serial_setsource,
1616 .reset_port = s3c2412_serial_resetport,
1617};
1618
1619/* device management */
1620
1621static int s3c2412_serial_probe(struct platform_device *dev)
1622{
1623 dbg("s3c2440_serial_probe: dev=%p\n", dev);
Ben Dooks71aa7052006-09-18 13:30:17 +01001624 return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
Ben Dooks73e55cb2006-06-24 21:21:32 +01001625}
1626
1627static struct platform_driver s3c2412_serial_drv = {
1628 .probe = s3c2412_serial_probe,
1629 .remove = s3c24xx_serial_remove,
1630 .suspend = s3c24xx_serial_suspend,
1631 .resume = s3c24xx_serial_resume,
1632 .driver = {
1633 .name = "s3c2412-uart",
1634 .owner = THIS_MODULE,
1635 },
1636};
1637
1638
1639static inline int s3c2412_serial_init(void)
1640{
1641 return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
1642}
1643
1644static inline void s3c2412_serial_exit(void)
1645{
1646 platform_driver_unregister(&s3c2412_serial_drv);
1647}
1648
1649#define s3c2412_uart_inf_at &s3c2412_uart_inf
1650#else
1651
1652static inline int s3c2412_serial_init(void)
1653{
1654 return 0;
1655}
1656
1657static inline void s3c2412_serial_exit(void)
1658{
1659}
1660
1661#define s3c2412_uart_inf_at NULL
1662#endif /* CONFIG_CPU_S3C2440 */
1663
1664
Linus Torvalds1da177e2005-04-16 15:20:36 -07001665/* module initialisation code */
1666
1667static int __init s3c24xx_serial_modinit(void)
1668{
1669 int ret;
1670
1671 ret = uart_register_driver(&s3c24xx_uart_drv);
1672 if (ret < 0) {
1673 printk(KERN_ERR "failed to register UART driver\n");
1674 return -1;
1675 }
1676
1677 s3c2400_serial_init();
1678 s3c2410_serial_init();
Ben Dooks73e55cb2006-06-24 21:21:32 +01001679 s3c2412_serial_init();
Linus Torvalds1da177e2005-04-16 15:20:36 -07001680 s3c2440_serial_init();
1681
1682 return 0;
1683}
1684
1685static void __exit s3c24xx_serial_modexit(void)
1686{
1687 s3c2400_serial_exit();
1688 s3c2410_serial_exit();
Ben Dooks73e55cb2006-06-24 21:21:32 +01001689 s3c2412_serial_exit();
Linus Torvalds1da177e2005-04-16 15:20:36 -07001690 s3c2440_serial_exit();
1691
1692 uart_unregister_driver(&s3c24xx_uart_drv);
1693}
1694
1695
1696module_init(s3c24xx_serial_modinit);
1697module_exit(s3c24xx_serial_modexit);
1698
1699/* Console code */
1700
1701#ifdef CONFIG_SERIAL_S3C2410_CONSOLE
1702
1703static struct uart_port *cons_uart;
1704
1705static int
1706s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
1707{
1708 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1709 unsigned long ufstat, utrstat;
1710
1711 if (ufcon & S3C2410_UFCON_FIFOMODE) {
1712 /* fifo mode - check ammount of data in fifo registers... */
1713
1714 ufstat = rd_regl(port, S3C2410_UFSTAT);
1715 return (ufstat & info->tx_fifofull) ? 0 : 1;
1716 }
1717
1718 /* in non-fifo mode, we go and use the tx buffer empty */
1719
1720 utrstat = rd_regl(port, S3C2410_UTRSTAT);
1721 return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
1722}
1723
1724static void
Russell Kingd3587882006-03-20 20:00:09 +00001725s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
1726{
1727 unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
1728 while (!s3c24xx_serial_console_txrdy(port, ufcon))
1729 barrier();
1730 wr_regb(cons_uart, S3C2410_UTXH, ch);
1731}
1732
1733static void
Linus Torvalds1da177e2005-04-16 15:20:36 -07001734s3c24xx_serial_console_write(struct console *co, const char *s,
1735 unsigned int count)
1736{
Russell Kingd3587882006-03-20 20:00:09 +00001737 uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001738}
1739
1740static void __init
1741s3c24xx_serial_get_options(struct uart_port *port, int *baud,
1742 int *parity, int *bits)
1743{
1744 struct s3c24xx_uart_clksrc clksrc;
1745 struct clk *clk;
1746 unsigned int ulcon;
1747 unsigned int ucon;
1748 unsigned int ubrdiv;
1749 unsigned long rate;
1750
1751 ulcon = rd_regl(port, S3C2410_ULCON);
1752 ucon = rd_regl(port, S3C2410_UCON);
1753 ubrdiv = rd_regl(port, S3C2410_UBRDIV);
1754
1755 dbg("s3c24xx_serial_get_options: port=%p\n"
1756 "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
1757 port, ulcon, ucon, ubrdiv);
1758
1759 if ((ucon & 0xf) != 0) {
1760 /* consider the serial port configured if the tx/rx mode set */
1761
1762 switch (ulcon & S3C2410_LCON_CSMASK) {
1763 case S3C2410_LCON_CS5:
1764 *bits = 5;
1765 break;
1766 case S3C2410_LCON_CS6:
1767 *bits = 6;
1768 break;
1769 case S3C2410_LCON_CS7:
1770 *bits = 7;
1771 break;
1772 default:
1773 case S3C2410_LCON_CS8:
1774 *bits = 8;
1775 break;
1776 }
1777
1778 switch (ulcon & S3C2410_LCON_PMASK) {
1779 case S3C2410_LCON_PEVEN:
1780 *parity = 'e';
1781 break;
1782
1783 case S3C2410_LCON_PODD:
1784 *parity = 'o';
1785 break;
1786
1787 case S3C2410_LCON_PNONE:
1788 default:
1789 *parity = 'n';
1790 }
1791
1792 /* now calculate the baud rate */
1793
1794 s3c24xx_serial_getsource(port, &clksrc);
1795
1796 clk = clk_get(port->dev, clksrc.name);
1797 if (!IS_ERR(clk) && clk != NULL)
1798 rate = clk_get_rate(clk) / clksrc.divisor;
1799 else
1800 rate = 1;
1801
1802
1803 *baud = rate / ( 16 * (ubrdiv + 1));
1804 dbg("calculated baud %d\n", *baud);
1805 }
1806
1807}
1808
1809/* s3c24xx_serial_init_ports
1810 *
1811 * initialise the serial ports from the machine provided initialisation
1812 * data.
1813*/
1814
1815static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
1816{
1817 struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
1818 struct platform_device **platdev_ptr;
1819 int i;
1820
1821 dbg("s3c24xx_serial_init_ports: initialising ports...\n");
1822
1823 platdev_ptr = s3c24xx_uart_devs;
1824
1825 for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) {
1826 s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
1827 }
1828
1829 return 0;
1830}
1831
1832static int __init
1833s3c24xx_serial_console_setup(struct console *co, char *options)
1834{
1835 struct uart_port *port;
1836 int baud = 9600;
1837 int bits = 8;
1838 int parity = 'n';
1839 int flow = 'n';
1840
1841 dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n",
1842 co, co->index, options);
1843
1844 /* is this a valid port */
1845
1846 if (co->index == -1 || co->index >= NR_PORTS)
1847 co->index = 0;
1848
1849 port = &s3c24xx_serial_ports[co->index].port;
1850
1851 /* is the port configured? */
1852
1853 if (port->mapbase == 0x0) {
1854 co->index = 0;
1855 port = &s3c24xx_serial_ports[co->index].port;
1856 }
1857
1858 cons_uart = port;
1859
1860 dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index);
1861
1862 /*
1863 * Check whether an invalid uart number has been specified, and
1864 * if so, search for the first available port that does have
1865 * console support.
1866 */
1867 if (options)
1868 uart_parse_options(options, &baud, &parity, &bits, &flow);
1869 else
1870 s3c24xx_serial_get_options(port, &baud, &parity, &bits);
1871
1872 dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
1873
1874 return uart_set_options(port, co, baud, parity, bits, flow);
1875}
1876
1877/* s3c24xx_serial_initconsole
1878 *
1879 * initialise the console from one of the uart drivers
1880*/
1881
1882static struct console s3c24xx_serial_console =
1883{
1884 .name = S3C24XX_SERIAL_NAME,
1885 .device = uart_console_device,
1886 .flags = CON_PRINTBUFFER,
1887 .index = -1,
1888 .write = s3c24xx_serial_console_write,
1889 .setup = s3c24xx_serial_console_setup
1890};
1891
1892static int s3c24xx_serial_initconsole(void)
1893{
1894 struct s3c24xx_uart_info *info;
1895 struct platform_device *dev = s3c24xx_uart_devs[0];
1896
1897 dbg("s3c24xx_serial_initconsole\n");
1898
1899 /* select driver based on the cpu */
1900
1901 if (dev == NULL) {
1902 printk(KERN_ERR "s3c24xx: no devices for console init\n");
1903 return 0;
1904 }
1905
1906 if (strcmp(dev->name, "s3c2400-uart") == 0) {
1907 info = s3c2400_uart_inf_at;
1908 } else if (strcmp(dev->name, "s3c2410-uart") == 0) {
1909 info = s3c2410_uart_inf_at;
1910 } else if (strcmp(dev->name, "s3c2440-uart") == 0) {
1911 info = s3c2440_uart_inf_at;
Ben Dooks73e55cb2006-06-24 21:21:32 +01001912 } else if (strcmp(dev->name, "s3c2412-uart") == 0) {
1913 info = s3c2412_uart_inf_at;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001914 } else {
1915 printk(KERN_ERR "s3c24xx: no driver for %s\n", dev->name);
1916 return 0;
1917 }
1918
1919 if (info == NULL) {
1920 printk(KERN_ERR "s3c24xx: no driver for console\n");
1921 return 0;
1922 }
1923
1924 s3c24xx_serial_console.data = &s3c24xx_uart_drv;
1925 s3c24xx_serial_init_ports(info);
1926
1927 register_console(&s3c24xx_serial_console);
1928 return 0;
1929}
1930
1931console_initcall(s3c24xx_serial_initconsole);
1932
1933#endif /* CONFIG_SERIAL_S3C2410_CONSOLE */
1934
1935MODULE_LICENSE("GPL");
1936MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
Ben Dooks73e55cb2006-06-24 21:21:32 +01001937MODULE_DESCRIPTION("Samsung S3C2410/S3C2440/S3C2412 Serial port driver");
Kay Sieverse169c132008-04-15 14:34:35 -07001938MODULE_ALIAS("platform:s3c2400-uart");
1939MODULE_ALIAS("platform:s3c2410-uart");
1940MODULE_ALIAS("platform:s3c2412-uart");
1941MODULE_ALIAS("platform:s3c2440-uart");