blob: 4ea6711e55aa5263812ba401a84dbae7ff5d4dbf [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/arch/alpha/kernel/pci.c
3 *
4 * Extruded from code written by
5 * Dave Rusling (david.rusling@reo.mts.dec.com)
6 * David Mosberger (davidm@cs.arizona.edu)
7 */
8
9/* 2.3.x PCI/resources, 1999 Andrea Arcangeli <andrea@suse.de> */
10
11/*
12 * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
13 * PCI-PCI bridges cleanup
14 */
15#include <linux/config.h>
16#include <linux/string.h>
17#include <linux/pci.h>
18#include <linux/init.h>
19#include <linux/ioport.h>
20#include <linux/kernel.h>
21#include <linux/bootmem.h>
22#include <linux/module.h>
23#include <linux/cache.h>
24#include <linux/slab.h>
25#include <asm/machvec.h>
26
27#include "proto.h"
28#include "pci_impl.h"
29
30
31/*
32 * Some string constants used by the various core logics.
33 */
34
35const char *const pci_io_names[] = {
36 "PCI IO bus 0", "PCI IO bus 1", "PCI IO bus 2", "PCI IO bus 3",
37 "PCI IO bus 4", "PCI IO bus 5", "PCI IO bus 6", "PCI IO bus 7"
38};
39
40const char *const pci_mem_names[] = {
41 "PCI mem bus 0", "PCI mem bus 1", "PCI mem bus 2", "PCI mem bus 3",
42 "PCI mem bus 4", "PCI mem bus 5", "PCI mem bus 6", "PCI mem bus 7"
43};
44
45const char pci_hae0_name[] = "HAE0";
46
47/* Indicate whether we respect the PCI setup left by console. */
48/*
49 * Make this long-lived so that we know when shutting down
50 * whether we probed only or not.
51 */
52int pci_probe_only;
53
54/*
55 * The PCI controller list.
56 */
57
58struct pci_controller *hose_head, **hose_tail = &hose_head;
59struct pci_controller *pci_isa_hose;
60
61/*
62 * Quirks.
63 */
64
65static void __init
66quirk_isa_bridge(struct pci_dev *dev)
67{
68 dev->class = PCI_CLASS_BRIDGE_ISA << 8;
69}
70DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge);
71
72static void __init
73quirk_cypress(struct pci_dev *dev)
74{
75 /* The Notorious Cy82C693 chip. */
76
77 /* The Cypress IDE controller doesn't support native mode, but it
78 has programmable addresses of IDE command/control registers.
79 This violates PCI specifications, confuses the IDE subsystem and
80 causes resource conflicts between the primary HD_CMD register and
81 the floppy controller. Ugh. Fix that. */
82 if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
83 dev->resource[0].flags = 0;
84 dev->resource[1].flags = 0;
85 }
86
87 /* The Cypress bridge responds on the PCI bus in the address range
88 0xffff0000-0xffffffff (conventional x86 BIOS ROM). There is no
89 way to turn this off. The bridge also supports several extended
90 BIOS ranges (disabled after power-up), and some consoles do turn
91 them on. So if we use a large direct-map window, or a large SG
92 window, we must avoid the entire 0xfff00000-0xffffffff region. */
93 else if (dev->class >> 8 == PCI_CLASS_BRIDGE_ISA) {
94 if (__direct_map_base + __direct_map_size >= 0xfff00000UL)
95 __direct_map_size = 0xfff00000UL - __direct_map_base;
96 else {
97 struct pci_controller *hose = dev->sysdata;
98 struct pci_iommu_arena *pci = hose->sg_pci;
99 if (pci && pci->dma_base + pci->size >= 0xfff00000UL)
100 pci->size = 0xfff00000UL - pci->dma_base;
101 }
102 }
103}
104DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress);
105
106/* Called for each device after PCI setup is done. */
107static void __init
108pcibios_fixup_final(struct pci_dev *dev)
109{
110 unsigned int class = dev->class >> 8;
111
112 if (class == PCI_CLASS_BRIDGE_ISA || class == PCI_CLASS_BRIDGE_EISA) {
113 dev->dma_mask = MAX_ISA_DMA_ADDRESS - 1;
114 isa_bridge = dev;
115 }
116}
117DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final);
118
119/* Just declaring that the power-of-ten prefixes are actually the
120 power-of-two ones doesn't make it true :) */
121#define KB 1024
122#define MB (1024*KB)
123#define GB (1024*MB)
124
125void
126pcibios_align_resource(void *data, struct resource *res,
Greg Kroah-Hartmane31dd6e2006-06-12 17:06:02 -0700127 resource_size_t size, resource_size_t align)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700128{
129 struct pci_dev *dev = data;
130 struct pci_controller *hose = dev->sysdata;
131 unsigned long alignto;
Greg Kroah-Hartmane31dd6e2006-06-12 17:06:02 -0700132 resource_size_t start = res->start;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700133
134 if (res->flags & IORESOURCE_IO) {
135 /* Make sure we start at our min on all hoses */
136 if (start - hose->io_space->start < PCIBIOS_MIN_IO)
137 start = PCIBIOS_MIN_IO + hose->io_space->start;
138
139 /*
140 * Put everything into 0x00-0xff region modulo 0x400
141 */
142 if (start & 0x300)
143 start = (start + 0x3ff) & ~0x3ff;
144 }
145 else if (res->flags & IORESOURCE_MEM) {
146 /* Make sure we start at our min on all hoses */
147 if (start - hose->mem_space->start < PCIBIOS_MIN_MEM)
148 start = PCIBIOS_MIN_MEM + hose->mem_space->start;
149
150 /*
151 * The following holds at least for the Low Cost
152 * Alpha implementation of the PCI interface:
153 *
154 * In sparse memory address space, the first
155 * octant (16MB) of every 128MB segment is
156 * aliased to the very first 16 MB of the
157 * address space (i.e., it aliases the ISA
158 * memory address space). Thus, we try to
159 * avoid allocating PCI devices in that range.
160 * Can be allocated in 2nd-7th octant only.
161 * Devices that need more than 112MB of
162 * address space must be accessed through
163 * dense memory space only!
164 */
165
166 /* Align to multiple of size of minimum base. */
167 alignto = max(0x1000UL, align);
168 start = ALIGN(start, alignto);
169 if (hose->sparse_mem_base && size <= 7 * 16*MB) {
170 if (((start / (16*MB)) & 0x7) == 0) {
171 start &= ~(128*MB - 1);
172 start += 16*MB;
173 start = ALIGN(start, alignto);
174 }
175 if (start/(128*MB) != (start + size - 1)/(128*MB)) {
176 start &= ~(128*MB - 1);
177 start += (128 + 16)*MB;
178 start = ALIGN(start, alignto);
179 }
180 }
181 }
182
183 res->start = start;
184}
185#undef KB
186#undef MB
187#undef GB
188
189static int __init
190pcibios_init(void)
191{
192 if (alpha_mv.init_pci)
193 alpha_mv.init_pci();
194 return 0;
195}
196
197subsys_initcall(pcibios_init);
198
199char * __init
200pcibios_setup(char *str)
201{
202 return str;
203}
204
205#ifdef ALPHA_RESTORE_SRM_SETUP
206static struct pdev_srm_saved_conf *srm_saved_configs;
207
208void __init
209pdev_save_srm_config(struct pci_dev *dev)
210{
211 struct pdev_srm_saved_conf *tmp;
212 static int printed = 0;
213
214 if (!alpha_using_srm || pci_probe_only)
215 return;
216
217 if (!printed) {
218 printk(KERN_INFO "pci: enabling save/restore of SRM state\n");
219 printed = 1;
220 }
221
222 tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
223 if (!tmp) {
224 printk(KERN_ERR "%s: kmalloc() failed!\n", __FUNCTION__);
225 return;
226 }
227 tmp->next = srm_saved_configs;
228 tmp->dev = dev;
229
230 pci_save_state(dev);
231
232 srm_saved_configs = tmp;
233}
234
235void
236pci_restore_srm_config(void)
237{
238 struct pdev_srm_saved_conf *tmp;
239
240 /* No need to restore if probed only. */
241 if (pci_probe_only)
242 return;
243
244 /* Restore SRM config. */
245 for (tmp = srm_saved_configs; tmp; tmp = tmp->next) {
246 pci_restore_state(tmp->dev);
247 }
248}
249#endif
250
251void __init
252pcibios_fixup_resource(struct resource *res, struct resource *root)
253{
254 res->start += root->start;
255 res->end += root->start;
256}
257
258void __init
259pcibios_fixup_device_resources(struct pci_dev *dev, struct pci_bus *bus)
260{
261 /* Update device resources. */
262 struct pci_controller *hose = (struct pci_controller *)bus->sysdata;
263 int i;
264
265 for (i = 0; i < PCI_NUM_RESOURCES; i++) {
266 if (!dev->resource[i].start)
267 continue;
268 if (dev->resource[i].flags & IORESOURCE_IO)
269 pcibios_fixup_resource(&dev->resource[i],
270 hose->io_space);
271 else if (dev->resource[i].flags & IORESOURCE_MEM)
272 pcibios_fixup_resource(&dev->resource[i],
273 hose->mem_space);
274 }
275}
276
277void __init
278pcibios_fixup_bus(struct pci_bus *bus)
279{
280 /* Propagate hose info into the subordinate devices. */
281
282 struct pci_controller *hose = bus->sysdata;
283 struct pci_dev *dev = bus->self;
284
285 if (!dev) {
286 /* Root bus. */
287 u32 pci_mem_end;
288 u32 sg_base = hose->sg_pci ? hose->sg_pci->dma_base : ~0;
289 unsigned long end;
290
291 bus->resource[0] = hose->io_space;
292 bus->resource[1] = hose->mem_space;
293
294 /* Adjust hose mem_space limit to prevent PCI allocations
295 in the iommu windows. */
296 pci_mem_end = min((u32)__direct_map_base, sg_base) - 1;
297 end = hose->mem_space->start + pci_mem_end;
298 if (hose->mem_space->end > end)
299 hose->mem_space->end = end;
300 } else if (pci_probe_only &&
301 (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
302 pci_read_bridge_bases(bus);
303 pcibios_fixup_device_resources(dev, bus);
304 }
305
306 list_for_each_entry(dev, &bus->devices, bus_list) {
307 pdev_save_srm_config(dev);
308 if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
309 pcibios_fixup_device_resources(dev, bus);
310 }
311}
312
313void __init
314pcibios_update_irq(struct pci_dev *dev, int irq)
315{
316 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
317}
318
319/* Most Alphas have straight-forward swizzling needs. */
320
321u8 __init
322common_swizzle(struct pci_dev *dev, u8 *pinp)
323{
324 u8 pin = *pinp;
325
326 while (dev->bus->parent) {
327 pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
328 /* Move up the chain of bridges. */
329 dev = dev->bus->self;
330 }
331 *pinp = pin;
332
333 /* The slot is the slot of the last bridge. */
334 return PCI_SLOT(dev->devfn);
335}
336
337void __devinit
338pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
339 struct resource *res)
340{
341 struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
342 unsigned long offset = 0;
343
344 if (res->flags & IORESOURCE_IO)
345 offset = hose->io_space->start;
346 else if (res->flags & IORESOURCE_MEM)
347 offset = hose->mem_space->start;
348
349 region->start = res->start - offset;
350 region->end = res->end - offset;
351}
352
Dominik Brodowski43c34732005-08-04 18:06:21 -0700353void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
354 struct pci_bus_region *region)
355{
356 struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
357 unsigned long offset = 0;
358
359 if (res->flags & IORESOURCE_IO)
360 offset = hose->io_space->start;
361 else if (res->flags & IORESOURCE_MEM)
362 offset = hose->mem_space->start;
363
364 res->start = region->start + offset;
365 res->end = region->end + offset;
366}
367
Linus Torvalds1da177e2005-04-16 15:20:36 -0700368#ifdef CONFIG_HOTPLUG
369EXPORT_SYMBOL(pcibios_resource_to_bus);
Dominik Brodowski43c34732005-08-04 18:06:21 -0700370EXPORT_SYMBOL(pcibios_bus_to_resource);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700371#endif
372
373int
374pcibios_enable_device(struct pci_dev *dev, int mask)
375{
376 u16 cmd, oldcmd;
377 int i;
378
379 pci_read_config_word(dev, PCI_COMMAND, &cmd);
380 oldcmd = cmd;
381
382 for (i = 0; i < PCI_NUM_RESOURCES; i++) {
383 struct resource *res = &dev->resource[i];
384
385 if (res->flags & IORESOURCE_IO)
386 cmd |= PCI_COMMAND_IO;
387 else if (res->flags & IORESOURCE_MEM)
388 cmd |= PCI_COMMAND_MEMORY;
389 }
390
391 if (cmd != oldcmd) {
392 printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n",
393 pci_name(dev), cmd);
394 /* Enable the appropriate bits in the PCI command register. */
395 pci_write_config_word(dev, PCI_COMMAND, cmd);
396 }
397 return 0;
398}
399
400/*
401 * If we set up a device for bus mastering, we need to check the latency
402 * timer as certain firmware forgets to set it properly, as seen
403 * on SX164 and LX164 with SRM.
404 */
405void
406pcibios_set_master(struct pci_dev *dev)
407{
408 u8 lat;
409 pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
410 if (lat >= 16) return;
411 printk("PCI: Setting latency timer of device %s to 64\n",
412 pci_name(dev));
413 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
414}
415
416static void __init
417pcibios_claim_one_bus(struct pci_bus *b)
418{
419 struct pci_dev *dev;
420 struct pci_bus *child_bus;
421
422 list_for_each_entry(dev, &b->devices, bus_list) {
423 int i;
424
425 for (i = 0; i < PCI_NUM_RESOURCES; i++) {
426 struct resource *r = &dev->resource[i];
427
428 if (r->parent || !r->start || !r->flags)
429 continue;
430 pci_claim_resource(dev, i);
431 }
432 }
433
434 list_for_each_entry(child_bus, &b->children, node)
435 pcibios_claim_one_bus(child_bus);
436}
437
438static void __init
439pcibios_claim_console_setup(void)
440{
441 struct pci_bus *b;
442
443 list_for_each_entry(b, &pci_root_buses, node)
444 pcibios_claim_one_bus(b);
445}
446
447void __init
448common_init_pci(void)
449{
450 struct pci_controller *hose;
451 struct pci_bus *bus;
452 int next_busno;
453 int need_domain_info = 0;
454
455 /* Scan all of the recorded PCI controllers. */
456 for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
457 bus = pci_scan_bus(next_busno, alpha_mv.pci_ops, hose);
458 hose->bus = bus;
459 hose->need_domain_info = need_domain_info;
460 next_busno = bus->subordinate + 1;
461 /* Don't allow 8-bit bus number overflow inside the hose -
462 reserve some space for bridges. */
463 if (next_busno > 224) {
464 next_busno = 0;
465 need_domain_info = 1;
466 }
467 }
468
469 if (pci_probe_only)
470 pcibios_claim_console_setup();
471
472 pci_assign_unassigned_resources();
473 pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
474}
475
476
477struct pci_controller * __init
478alloc_pci_controller(void)
479{
480 struct pci_controller *hose;
481
482 hose = alloc_bootmem(sizeof(*hose));
483
484 *hose_tail = hose;
485 hose_tail = &hose->next;
486
487 return hose;
488}
489
490struct resource * __init
491alloc_resource(void)
492{
493 struct resource *res;
494
495 res = alloc_bootmem(sizeof(*res));
496
497 return res;
498}
499
500
501/* Provide information on locations of various I/O regions in physical
502 memory. Do this on a per-card basis so that we choose the right hose. */
503
504asmlinkage long
505sys_pciconfig_iobase(long which, unsigned long bus, unsigned long dfn)
506{
507 struct pci_controller *hose;
508 struct pci_dev *dev;
509
510 /* from hose or from bus.devfn */
511 if (which & IOBASE_FROM_HOSE) {
512 for(hose = hose_head; hose; hose = hose->next)
513 if (hose->index == bus) break;
514 if (!hose) return -ENODEV;
515 } else {
516 /* Special hook for ISA access. */
517 if (bus == 0 && dfn == 0) {
518 hose = pci_isa_hose;
519 } else {
520 dev = pci_find_slot(bus, dfn);
521 if (!dev)
522 return -ENODEV;
523 hose = dev->sysdata;
524 }
525 }
526
527 switch (which & ~IOBASE_FROM_HOSE) {
528 case IOBASE_HOSE:
529 return hose->index;
530 case IOBASE_SPARSE_MEM:
531 return hose->sparse_mem_base;
532 case IOBASE_DENSE_MEM:
533 return hose->dense_mem_base;
534 case IOBASE_SPARSE_IO:
535 return hose->sparse_io_base;
536 case IOBASE_DENSE_IO:
537 return hose->dense_io_base;
538 case IOBASE_ROOT_BUS:
539 return hose->bus->number;
540 }
541
542 return -EOPNOTSUPP;
543}
544
545/* Create an __iomem token from a PCI BAR. Copied from lib/iomap.c with
546 no changes, since we don't want the other things in that object file. */
547
548void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
549{
550 unsigned long start = pci_resource_start(dev, bar);
551 unsigned long len = pci_resource_len(dev, bar);
552 unsigned long flags = pci_resource_flags(dev, bar);
553
554 if (!len || !start)
555 return NULL;
556 if (maxlen && len > maxlen)
557 len = maxlen;
558 if (flags & IORESOURCE_IO)
559 return ioport_map(start, len);
560 if (flags & IORESOURCE_MEM) {
561 /* Not checking IORESOURCE_CACHEABLE because alpha does
562 not distinguish between ioremap and ioremap_nocache. */
563 return ioremap(start, len);
564 }
565 return NULL;
566}
567
568/* Destroy that token. Not copied from lib/iomap.c. */
569
570void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
571{
572 if (__is_mmio(addr))
573 iounmap(addr);
574}
575
576EXPORT_SYMBOL(pci_iomap);
577EXPORT_SYMBOL(pci_iounmap);