blob: 309eb557f9a340cb6b791b34021bcd8f65920a79 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
Dominik Brodowskibf45d9b02005-07-07 17:58:58 -07002# PCCARD (PCMCIA/CardBus) bus subsystem configuration
Linus Torvalds1da177e2005-04-16 15:20:36 -07003#
4
5menu "PCCARD (PCMCIA/CardBus) support"
6
7config PCCARD
8 tristate "PCCard (PCMCIA/CardBus) support"
9 select HOTPLUG
10 ---help---
11 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
12 computer. These are credit-card size devices such as network cards,
13 modems or hard drives often used with laptops computers. There are
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070014 actually two varieties of these cards: 16 bit PCMCIA and 32 bit
15 CardBus cards.
Linus Torvalds1da177e2005-04-16 15:20:36 -070016
17 To compile this driver as modules, choose M here: the
18 module will be called pcmcia_core.
19
20if PCCARD
21
22config PCMCIA_DEBUG
23 bool "Enable PCCARD debugging"
24 help
25 Say Y here to enable PCMCIA subsystem debugging. You
26 will need to choose the debugging level either via the
27 kernel command line, or module options depending whether
28 you build the PCMCIA as modules.
29
30 The kernel command line options are:
31 pcmcia_core.pc_debug=N
Dominik Brodowskibf45d9b02005-07-07 17:58:58 -070032 pcmcia.pc_debug=N
Linus Torvalds1da177e2005-04-16 15:20:36 -070033 sa11xx_core.pc_debug=N
34
35 The module option is called pc_debug=N
36
37 In all the above examples, N is the debugging verbosity
38 level.
39
40config PCMCIA
41 tristate "16-bit PCMCIA support"
Dominik Brodowskif861bd22005-06-27 16:28:57 -070042 select CRC32
Linus Torvalds1da177e2005-04-16 15:20:36 -070043 default y
44 ---help---
45 This option enables support for 16-bit PCMCIA cards. Most older
46 PC-cards are such 16-bit PCMCIA cards, so unless you know you're
47 only using 32-bit CardBus cards, say Y or M here.
48
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070049 To use 16-bit PCMCIA cards, you will need supporting software in
50 most cases. (see the file <file:Documentation/Changes> for
51 location and details).
Linus Torvalds1da177e2005-04-16 15:20:36 -070052
53 To compile this driver as modules, choose M here: the
54 module will be called pcmcia.
55
56 If unsure, say Y.
57
Dominik Brodowskidaa95172005-06-27 16:28:14 -070058config PCMCIA_LOAD_CIS
59 bool "Load CIS updates from userspace (EXPERIMENTAL)"
60 depends on PCMCIA && EXPERIMENTAL
61 select FW_LOADER
62 default y
63 help
64 Some PCMCIA cards require an updated Card Information Structure (CIS)
65 to be loaded from userspace to work correctly. If you say Y here,
66 and your userspace is arranged correctly, this will be loaded
67 automatically using the in-kernel firmware loader and the hotplug
68 subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
69
70 If unsure, say Y.
71
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070072config PCMCIA_IOCTL
Dominik Brodowskibf45d9b02005-07-07 17:58:58 -070073 bool "PCMCIA control ioctl (obsolete)"
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070074 depends on PCMCIA
75 default y
76 help
77 If you say Y here, the deprecated ioctl interface to the PCMCIA
78 subsystem will be built. It is needed by cardmgr and cardctl
79 (pcmcia-cs) to function properly.
80
Dominik Brodowskibf45d9b02005-07-07 17:58:58 -070081 You should use the new pcmciautils package instead (see
82 <file:Documentation/Changes> for location and details).
Dominik Brodowski9a5555b2005-06-27 16:28:47 -070083
84 If unsure, say Y.
85
Linus Torvalds1da177e2005-04-16 15:20:36 -070086config CARDBUS
87 bool "32-bit CardBus support"
88 depends on PCI
89 default y
90 ---help---
91 CardBus is a bus mastering architecture for PC-cards, which allows
92 for 32 bit PC-cards (the original PCMCIA standard specifies only
93 a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
94
95 To use 32 bit PC-cards, you also need a CardBus compatible host
96 bridge. Virtually all modern PCMCIA bridges do this, and most of
97 them are "yenta-compatible", so say Y or M there, too.
98
99 If unsure, say Y.
100
101comment "PC-card bridges"
102
103config YENTA
104 tristate "CardBus yenta-compatible bridge support"
Dominik Brodowski89b39f52005-07-07 17:59:09 -0700105 depends on PCI
106 select CARDBUS if !EMBEDDED
Linus Torvalds1da177e2005-04-16 15:20:36 -0700107 select PCCARD_NONSTATIC
108 ---help---
109 This option enables support for CardBus host bridges. Virtually
110 all modern PCMCIA bridges are CardBus compatible. A "bridge" is
111 the hardware inside your computer that PCMCIA cards are plugged
112 into.
113
114 To compile this driver as modules, choose M here: the
115 module will be called yenta_socket.
116
117 If unsure, say Y.
118
119config PD6729
120 tristate "Cirrus PD6729 compatible bridge support"
121 depends on PCMCIA && PCI
122 select PCCARD_NONSTATIC
123 help
124 This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
125 device, found in some older laptops and PCMCIA card readers.
126
127config I82092
128 tristate "i82092 compatible bridge support"
129 depends on PCMCIA && PCI
130 select PCCARD_NONSTATIC
131 help
132 This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
133 found in some older laptops and more commonly in evaluation boards for the
134 chip.
135
136config I82365
137 tristate "i82365 compatible bridge support"
138 depends on PCMCIA && ISA
139 select PCCARD_NONSTATIC
140 help
141 Say Y here to include support for ISA-bus PCMCIA host bridges that
142 are register compatible with the Intel i82365. These are found on
143 older laptops and ISA-bus card readers for desktop systems. A
144 "bridge" is the hardware inside your computer that PCMCIA cards are
145 plugged into. If unsure, say N.
146
147config TCIC
148 tristate "Databook TCIC host bridge support"
Komuro81000802005-09-24 23:12:40 -0700149 depends on PCMCIA && ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700150 select PCCARD_NONSTATIC
151 help
152 Say Y here to include support for the Databook TCIC family of PCMCIA
153 host bridges. These are only found on a handful of old systems.
154 "Bridge" is the name used for the hardware inside your computer that
155 PCMCIA cards are plugged into. If unsure, say N.
156
Marcelo Tosattide957c82005-10-28 17:46:13 -0700157config PCMCIA_M8XX
158 tristate "MPC8xx PCMCIA support"
Marcelo Tosattie3463152005-11-05 13:03:32 -0200159 depends on PCMCIA && PPC && 8xx
Marcelo Tosattide957c82005-10-28 17:46:13 -0700160 select PCCARD_NONSTATIC
161 help
162 Say Y here to include support for PowerPC 8xx series PCMCIA
163 controller.
164
165 This driver is also available as a module called m8xx_pcmcia.
166
Linus Torvalds1da177e2005-04-16 15:20:36 -0700167config HD64465_PCMCIA
168 tristate "HD64465 host bridge support"
169 depends on HD64465 && PCMCIA
170
171config PCMCIA_AU1X00
172 tristate "Au1x00 pcmcia support"
173 depends on SOC_AU1X00 && PCMCIA
174
175config PCMCIA_SA1100
176 tristate "SA1100 support"
177 depends on ARM && ARCH_SA1100 && PCMCIA
178 help
179 Say Y here to include support for SA11x0-based PCMCIA or CF
180 sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
181 Xscale(R) embedded machines.
182
183 This driver is also available as a module called sa1100_cs.
184
185config PCMCIA_SA1111
186 tristate "SA1111 support"
187 depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
188 help
189 Say Y here to include support for SA1111-based PCMCIA or CF
190 sockets, found on the Jornada 720, Graphicsmaster and other
191 StrongARM(R)/Xscale(R) embedded machines.
192
193 This driver is also available as a module called sa1111_cs.
194
195config PCMCIA_PXA2XX
196 tristate "PXA2xx support"
197 depends on ARM && ARCH_PXA && PCMCIA
198 help
199 Say Y here to include support for the PXA2xx PCMCIA controller
200
201config PCMCIA_PROBE
202 bool
203 default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X
204
205config M32R_PCC
206 bool "M32R PCMCIA I/F"
207 depends on M32R && CHIP_M32700 && PCMCIA
Hirokazu Takata934bb7f2005-06-21 17:16:14 -0700208 select PCCARD_NONSTATIC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700209 help
210 Say Y here to use the M32R PCMCIA controller.
211
212config M32R_CFC
213 bool "M32R CF I/F Controller"
Hirokazu Takata934bb7f2005-06-21 17:16:14 -0700214 depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
215 select PCCARD_NONSTATIC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700216 help
217 Say Y here to use the M32R CompactFlash controller.
218
219config M32R_CFC_NUM
220 int "M32R CF I/F number"
221 depends on M32R_CFC
Hirokazu Takata934bb7f2005-06-21 17:16:14 -0700222 default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700223 help
224 Set the number of M32R CF slots.
225
226config PCMCIA_VRC4171
227 tristate "NEC VRC4171 Card Controllers support"
228 depends on VRC4171 && PCMCIA
229
230config PCMCIA_VRC4173
231 tristate "NEC VRC4173 CARDU support"
232 depends on CPU_VR41XX && PCI && PCMCIA
233
David Brownellf74e48a2005-09-09 13:03:28 -0700234config OMAP_CF
235 tristate "OMAP CompactFlash Controller"
236 depends on PCMCIA && ARCH_OMAP16XX
237 help
238 Say Y here to support the CompactFlash controller on OMAP.
239 Note that this doesn't support "True IDE" mode.
240
Linus Torvalds1da177e2005-04-16 15:20:36 -0700241config PCCARD_NONSTATIC
242 tristate
243
244endif # PCCARD
245
246endmenu