blob: 2beef3bfe9ca93f3857361a879e76e38ee7161ac [file] [log] [blame]
Axel Lina9e51fe2013-12-01 19:41:06 +08001#ifndef PINCTRL_PINCTRL_ABx500_H
Patrice Chotard0493e642013-01-08 10:41:02 +01002#define PINCTRL_PINCTRL_ABx500_H
3
4/* Package definitions */
5#define PINCTRL_AB8500 0
6#define PINCTRL_AB8540 1
7#define PINCTRL_AB9540 2
8#define PINCTRL_AB8505 3
9
10/* pins alternate function */
11enum abx500_pin_func {
12 ABX500_DEFAULT,
13 ABX500_ALT_A,
14 ABX500_ALT_B,
15 ABX500_ALT_C,
16};
17
Linus Walleij97b583f2013-12-03 15:50:49 +010018enum abx500_gpio_pull_updown {
19 ABX500_GPIO_PULL_DOWN = 0x0,
20 ABX500_GPIO_PULL_NONE = 0x1,
21 ABX500_GPIO_PULL_UP = 0x3,
22};
23
24enum abx500_gpio_vinsel {
25 ABX500_GPIO_VINSEL_VBAT = 0x0,
26 ABX500_GPIO_VINSEL_VIN_1V8 = 0x1,
27 ABX500_GPIO_VINSEL_VDD_BIF = 0x2,
28};
29
Patrice Chotard0493e642013-01-08 10:41:02 +010030/**
31 * struct abx500_function - ABx500 pinctrl mux function
32 * @name: The name of the function, exported to pinctrl core.
33 * @groups: An array of pin groups that may select this function.
34 * @ngroups: The number of entries in @groups.
35 */
36struct abx500_function {
37 const char *name;
38 const char * const *groups;
39 unsigned ngroups;
40};
41
42/**
43 * struct abx500_pingroup - describes a ABx500 pin group
44 * @name: the name of this specific pin group
45 * @pins: an array of discrete physical pins used in this group, taken
46 * from the driver-local pin enumeration space
47 * @num_pins: the number of pins in this group array, i.e. the number of
48 * elements in .pins so we can iterate over that array
49 * @altsetting: the altsetting to apply to all pins in this group to
50 * configure them to be used by a function
51 */
52struct abx500_pingroup {
53 const char *name;
54 const unsigned int *pins;
55 const unsigned npins;
56 int altsetting;
57};
58
59#define ALTERNATE_FUNCTIONS(pin, sel_bit, alt1, alt2, alta, altb, altc) \
60{ \
61 .pin_number = pin, \
62 .gpiosel_bit = sel_bit, \
63 .alt_bit1 = alt1, \
64 .alt_bit2 = alt2, \
65 .alta_val = alta, \
66 .altb_val = altb, \
67 .altc_val = altc, \
68}
69
70#define UNUSED -1
71/**
72 * struct alternate_functions
73 * @pin_number: The pin number
74 * @gpiosel_bit: Control bit in GPIOSEL register,
75 * @alt_bit1: First AlternateFunction bit used to select the
76 * alternate function
77 * @alt_bit2: Second AlternateFunction bit used to select the
78 * alternate function
79 *
80 * these 3 following fields are necessary due to none
81 * coherency on how to select the altA, altB and altC
82 * function between the ABx500 SOC family when using
83 * alternatfunc register.
84 * @alta_val: value to write in alternatfunc to select altA function
85 * @altb_val: value to write in alternatfunc to select altB function
86 * @altc_val: value to write in alternatfunc to select altC function
87 */
88struct alternate_functions {
89 unsigned pin_number;
90 s8 gpiosel_bit;
91 s8 alt_bit1;
92 s8 alt_bit2;
93 u8 alta_val;
94 u8 altb_val;
95 u8 altc_val;
96};
97
98/**
99 * struct pullud - specific pull up/down feature
100 * @first_pin: The pin number of the first pins which support
101 * specific pull up/down
102 * @last_pin: The pin number of the last pins
103 */
104struct pullud {
105 unsigned first_pin;
106 unsigned last_pin;
107};
108
109#define GPIO_IRQ_CLUSTER(a, b, c) \
110{ \
111 .start = a, \
112 .end = b, \
Lee Jonesa6a16d22013-01-31 09:57:52 +0000113 .to_irq = c, \
Patrice Chotard0493e642013-01-08 10:41:02 +0100114}
115
116/**
117 * struct abx500_gpio_irq_cluster - indicates GPIOs which are interrupt
118 * capable
119 * @start: The pin number of the first pin interrupt capable
120 * @end: The pin number of the last pin interrupt capable
Lee Jonesa6a16d22013-01-31 09:57:52 +0000121 * @to_irq: The ABx500 GPIO's associated IRQs are clustered
122 * together throughout the interrupt numbers at irregular
123 * intervals. To solve this quandary, we will place the
124 * read-in values into the cluster information table
Patrice Chotard0493e642013-01-08 10:41:02 +0100125 */
126
127struct abx500_gpio_irq_cluster {
128 int start;
129 int end;
Lee Jonesa6a16d22013-01-31 09:57:52 +0000130 int to_irq;
Patrice Chotard0493e642013-01-08 10:41:02 +0100131};
132
133/**
134 * struct abx500_pinrange - map pin numbers to GPIO offsets
135 * @offset: offset into the GPIO local numberspace, incidentally
136 * identical to the offset into the local pin numberspace
137 * @npins: number of pins to map from both offsets
138 * @altfunc: altfunc setting to be used to enable GPIO on a pin in
139 * this range (may vary)
140 */
141struct abx500_pinrange {
142 unsigned int offset;
143 unsigned int npins;
144 int altfunc;
145};
146
147#define ABX500_PINRANGE(a, b, c) { .offset = a, .npins = b, .altfunc = c }
148
149/**
150 * struct abx500_pinctrl_soc_data - ABx500 pin controller per-SoC configuration
151 * @gpio_ranges: An array of GPIO ranges for this SoC
152 * @gpio_num_ranges: The number of GPIO ranges for this SoC
153 * @pins: An array describing all pins the pin controller affects.
154 * All pins which are also GPIOs must be listed first within the
155 * array, and be numbered identically to the GPIO controller's
156 * numbering.
157 * @npins: The number of entries in @pins.
158 * @functions: The functions supported on this SoC.
159 * @nfunction: The number of entries in @functions.
160 * @groups: An array describing all pin groups the pin SoC supports.
161 * @ngroups: The number of entries in @groups.
162 * @alternate_functions: array describing pins which supports alternate and
163 * how to set it.
164 * @pullud: array describing pins which supports pull up/down
165 * specific registers.
166 * @gpio_irq_cluster: An array of GPIO interrupt capable for this SoC
167 * @ngpio_irq_cluster: The number of GPIO inetrrupt capable for this SoC
168 * @irq_gpio_rising_offset: Interrupt offset used as base to compute specific
169 * setting strategy of the rising interrupt line
170 * @irq_gpio_falling_offset: Interrupt offset used as base to compute specific
171 * setting strategy of the falling interrupt line
172 * @irq_gpio_factor: Factor used to compute specific setting strategy of
173 * the interrupt line
174 */
175
176struct abx500_pinctrl_soc_data {
177 const struct abx500_pinrange *gpio_ranges;
178 unsigned gpio_num_ranges;
179 const struct pinctrl_pin_desc *pins;
180 unsigned npins;
181 const struct abx500_function *functions;
182 unsigned nfunctions;
183 const struct abx500_pingroup *groups;
184 unsigned ngroups;
185 struct alternate_functions *alternate_functions;
186 struct pullud *pullud;
187 struct abx500_gpio_irq_cluster *gpio_irq_cluster;
188 unsigned ngpio_irq_cluster;
189 int irq_gpio_rising_offset;
190 int irq_gpio_falling_offset;
191 int irq_gpio_factor;
192};
193
Patrice Chotard3c937992013-01-08 10:59:53 +0100194#ifdef CONFIG_PINCTRL_AB8500
195
196void abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc);
197
198#else
199
200static inline void
201abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
202{
203}
204
205#endif
206
Patrice Chotarda8f96e42013-01-28 14:35:19 +0100207#ifdef CONFIG_PINCTRL_AB8540
208
209void abx500_pinctrl_ab8540_init(struct abx500_pinctrl_soc_data **soc);
210
211#else
212
213static inline void
214abx500_pinctrl_ab8540_init(struct abx500_pinctrl_soc_data **soc)
215{
216}
217
218#endif
219
Patrice Chotard09dbec32013-01-28 14:29:35 +0100220#ifdef CONFIG_PINCTRL_AB9540
221
222void abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc);
223
224#else
225
226static inline void
227abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc)
228{
229}
230
231#endif
232
Patrice Chotard1aa2d8d2013-01-28 14:23:45 +0100233#ifdef CONFIG_PINCTRL_AB8505
234
235void abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc);
236
237#else
238
239static inline void
240abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc)
241{
242}
243
244#endif
245
Patrice Chotard0493e642013-01-08 10:41:02 +0100246#endif /* PINCTRL_PINCTRL_ABx500_H */