blob: 42ff7ff09bf59ca8d18981b71bed1c72b9639501 [file] [log] [blame]
Alexey Koroleveb3db272008-12-16 18:15:33 +00001/* Primary function overlay window definitions
2 * and service functions used by LPDDR chips
3 */
4#ifndef __LINUX_MTD_PFOW_H
5#define __LINUX_MTD_PFOW_H
6
7#include <linux/mtd/qinfo.h>
8
9/* PFOW registers addressing */
10/* Address of symbol "P" */
11#define PFOW_QUERY_STRING_P 0x0000
12/* Address of symbol "F" */
13#define PFOW_QUERY_STRING_F 0x0002
14/* Address of symbol "O" */
15#define PFOW_QUERY_STRING_O 0x0004
16/* Address of symbol "W" */
17#define PFOW_QUERY_STRING_W 0x0006
18/* Identification info for LPDDR chip */
19#define PFOW_MANUFACTURER_ID 0x0020
20#define PFOW_DEVICE_ID 0x0022
21/* Address in PFOW where prog buffer can can be found */
22#define PFOW_PROGRAM_BUFFER_OFFSET 0x0040
23/* Size of program buffer in words */
24#define PFOW_PROGRAM_BUFFER_SIZE 0x0042
25/* Address command code register */
26#define PFOW_COMMAND_CODE 0x0080
27/* command data register */
28#define PFOW_COMMAND_DATA 0x0084
29/* command address register lower address bits */
30#define PFOW_COMMAND_ADDRESS_L 0x0088
31/* command address register upper address bits */
32#define PFOW_COMMAND_ADDRESS_H 0x008a
33/* number of bytes to be proggrammed lower address bits */
34#define PFOW_DATA_COUNT_L 0x0090
35/* number of bytes to be proggrammed higher address bits */
36#define PFOW_DATA_COUNT_H 0x0092
37/* command execution register, the only possible value is 0x01 */
38#define PFOW_COMMAND_EXECUTE 0x00c0
39/* 0x01 should be written at this address to clear buffer */
40#define PFOW_CLEAR_PROGRAM_BUFFER 0x00c4
41/* device program/erase suspend register */
42#define PFOW_PROGRAM_ERASE_SUSPEND 0x00c8
43/* device status register */
44#define PFOW_DSR 0x00cc
45
46/* LPDDR memory device command codes */
47/* They are possible values of PFOW command code register */
48#define LPDDR_WORD_PROGRAM 0x0041
49#define LPDDR_BUFF_PROGRAM 0x00E9
50#define LPDDR_BLOCK_ERASE 0x0020
51#define LPDDR_LOCK_BLOCK 0x0061
52#define LPDDR_UNLOCK_BLOCK 0x0062
53#define LPDDR_READ_BLOCK_LOCK_STATUS 0x0065
54#define LPDDR_INFO_QUERY 0x0098
55#define LPDDR_READ_OTP 0x0097
56#define LPDDR_PROG_OTP 0x00C0
57#define LPDDR_RESUME 0x00D0
58
59/* Defines possible value of PFOW command execution register */
60#define LPDDR_START_EXECUTION 0x0001
61
62/* Defines possible value of PFOW program/erase suspend register */
63#define LPDDR_SUSPEND 0x0001
64
65/* Possible values of PFOW device status register */
66/* access R - read; RC read & clearable */
67#define DSR_DPS (1<<1) /* RC; device protect status
68 * 0 - not protected 1 - locked */
69#define DSR_PSS (1<<2) /* R; program suspend status;
70 * 0-prog in progress/completed,
71 * 1- prog suspended */
72#define DSR_VPPS (1<<3) /* RC; 0-Vpp OK, * 1-Vpp low */
73#define DSR_PROGRAM_STATUS (1<<4) /* RC; 0-successful, 1-error */
74#define DSR_ERASE_STATUS (1<<5) /* RC; erase or blank check status;
75 * 0-success erase/blank check,
76 * 1 blank check error */
77#define DSR_ESS (1<<6) /* R; erase suspend status;
78 * 0-erase in progress/complete,
79 * 1 erase suspended */
80#define DSR_READY_STATUS (1<<7) /* R; Device status
81 * 0-busy,
82 * 1-ready */
83#define DSR_RPS (0x3<<8) /* RC; region program status
84 * 00 - Success,
85 * 01-re-program attempt in region with
86 * object mode data,
87 * 10-object mode program w attempt in
88 * region with control mode data
89 * 11-attempt to program invalid half
90 * with 0x41 command */
91#define DSR_AOS (1<<12) /* RC; 1- AO related failure */
92#define DSR_AVAILABLE (1<<15) /* R; Device availbility
93 * 1 - Device available
94 * 0 - not available */
95
96/* The superset of all possible error bits in DSR */
97#define DSR_ERR 0x133A
98
99static inline void send_pfow_command(struct map_info *map,
100 unsigned long cmd_code, unsigned long adr,
101 unsigned long len, map_word *datum)
102{
103 int bits_per_chip = map_bankwidth(map) * 8;
Alexey Koroleveb3db272008-12-16 18:15:33 +0000104
105 map_write(map, CMD(cmd_code), map->pfow_base + PFOW_COMMAND_CODE);
106 map_write(map, CMD(adr & ((1<<bits_per_chip) - 1)),
107 map->pfow_base + PFOW_COMMAND_ADDRESS_L);
108 map_write(map, CMD(adr>>bits_per_chip),
109 map->pfow_base + PFOW_COMMAND_ADDRESS_H);
110 if (len) {
111 map_write(map, CMD(len & ((1<<bits_per_chip) - 1)),
112 map->pfow_base + PFOW_DATA_COUNT_L);
113 map_write(map, CMD(len>>bits_per_chip),
114 map->pfow_base + PFOW_DATA_COUNT_H);
115 }
116 if (datum)
117 map_write(map, *datum, map->pfow_base + PFOW_COMMAND_DATA);
118
119 /* Command execution start */
120 map_write(map, CMD(LPDDR_START_EXECUTION),
121 map->pfow_base + PFOW_COMMAND_EXECUTE);
122}
123
124static inline void print_drs_error(unsigned dsr)
125{
126 int prog_status = (dsr & DSR_RPS) >> 8;
127
128 if (!(dsr & DSR_AVAILABLE))
129 printk(KERN_NOTICE"DSR.15: (0) Device not Available\n");
130 if (prog_status & 0x03)
131 printk(KERN_NOTICE"DSR.9,8: (11) Attempt to program invalid "
132 "half with 41h command\n");
133 else if (prog_status & 0x02)
134 printk(KERN_NOTICE"DSR.9,8: (10) Object Mode Program attempt "
135 "in region with Control Mode data\n");
136 else if (prog_status & 0x01)
137 printk(KERN_NOTICE"DSR.9,8: (01) Program attempt in region "
138 "with Object Mode data\n");
139 if (!(dsr & DSR_READY_STATUS))
140 printk(KERN_NOTICE"DSR.7: (0) Device is Busy\n");
141 if (dsr & DSR_ESS)
142 printk(KERN_NOTICE"DSR.6: (1) Erase Suspended\n");
143 if (dsr & DSR_ERASE_STATUS)
144 printk(KERN_NOTICE"DSR.5: (1) Erase/Blank check error\n");
145 if (dsr & DSR_PROGRAM_STATUS)
146 printk(KERN_NOTICE"DSR.4: (1) Program Error\n");
147 if (dsr & DSR_VPPS)
148 printk(KERN_NOTICE"DSR.3: (1) Vpp low detect, operation "
149 "aborted\n");
150 if (dsr & DSR_PSS)
151 printk(KERN_NOTICE"DSR.2: (1) Program suspended\n");
152 if (dsr & DSR_DPS)
153 printk(KERN_NOTICE"DSR.1: (1) Aborted Erase/Program attempt "
154 "on locked block\n");
155}
156#endif /* __LINUX_MTD_PFOW_H */