Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 1 | /* |
| 2 | * TAS5086 ASoC codec driver |
| 3 | * |
| 4 | * Copyright (c) 2013 Daniel Mack <zonque@gmail.com> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or |
| 7 | * modify it under the terms of the GNU General Public License |
| 8 | * as published by the Free Software Foundation; either version 2 |
| 9 | * of the License, or (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | * |
| 16 | * TODO: |
| 17 | * - implement DAPM and input muxing |
| 18 | * - implement modulation limit |
| 19 | * - implement non-default PWM start |
| 20 | * |
| 21 | * Note that this chip has a very unusual register layout, specifically |
| 22 | * because the registers are of unequal size, and multi-byte registers |
| 23 | * require bulk writes to take effect. Regmap does not support that kind |
| 24 | * of devices. |
| 25 | * |
| 26 | * Currently, the driver does not touch any of the registers >= 0x20, so |
| 27 | * it doesn't matter because the entire map can be accessed as 8-bit |
| 28 | * array. In case more features will be added in the future |
| 29 | * that require access to higher registers, the entire regmap H/W I/O |
| 30 | * routines have to be open-coded. |
| 31 | */ |
| 32 | |
| 33 | #include <linux/module.h> |
| 34 | #include <linux/slab.h> |
| 35 | #include <linux/delay.h> |
| 36 | #include <linux/gpio.h> |
| 37 | #include <linux/i2c.h> |
| 38 | #include <linux/regmap.h> |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 39 | #include <linux/regulator/consumer.h> |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 40 | #include <linux/spi/spi.h> |
Sachin Kamat | 285d00c | 2013-10-11 17:23:59 +0530 | [diff] [blame] | 41 | #include <linux/of.h> |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 42 | #include <linux/of_device.h> |
| 43 | #include <linux/of_gpio.h> |
| 44 | #include <sound/pcm.h> |
| 45 | #include <sound/pcm_params.h> |
| 46 | #include <sound/soc.h> |
| 47 | #include <sound/tlv.h> |
| 48 | #include <sound/tas5086.h> |
| 49 | |
| 50 | #define TAS5086_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ |
| 51 | SNDRV_PCM_FMTBIT_S20_3LE | \ |
| 52 | SNDRV_PCM_FMTBIT_S24_3LE) |
| 53 | |
| 54 | #define TAS5086_PCM_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ |
| 55 | SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \ |
| 56 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \ |
| 57 | SNDRV_PCM_RATE_192000) |
| 58 | |
| 59 | /* |
| 60 | * TAS5086 registers |
| 61 | */ |
| 62 | #define TAS5086_CLOCK_CONTROL 0x00 /* Clock control register */ |
| 63 | #define TAS5086_CLOCK_RATE(val) (val << 5) |
| 64 | #define TAS5086_CLOCK_RATE_MASK (0x7 << 5) |
| 65 | #define TAS5086_CLOCK_RATIO(val) (val << 2) |
| 66 | #define TAS5086_CLOCK_RATIO_MASK (0x7 << 2) |
| 67 | #define TAS5086_CLOCK_SCLK_RATIO_48 (1 << 1) |
| 68 | #define TAS5086_CLOCK_VALID (1 << 0) |
| 69 | |
| 70 | #define TAS5086_DEEMPH_MASK 0x03 |
| 71 | #define TAS5086_SOFT_MUTE_ALL 0x3f |
| 72 | |
| 73 | #define TAS5086_DEV_ID 0x01 /* Device ID register */ |
| 74 | #define TAS5086_ERROR_STATUS 0x02 /* Error status register */ |
| 75 | #define TAS5086_SYS_CONTROL_1 0x03 /* System control register 1 */ |
| 76 | #define TAS5086_SERIAL_DATA_IF 0x04 /* Serial data interface register */ |
| 77 | #define TAS5086_SYS_CONTROL_2 0x05 /* System control register 2 */ |
| 78 | #define TAS5086_SOFT_MUTE 0x06 /* Soft mute register */ |
| 79 | #define TAS5086_MASTER_VOL 0x07 /* Master volume */ |
| 80 | #define TAS5086_CHANNEL_VOL(X) (0x08 + (X)) /* Channel 1-6 volume */ |
| 81 | #define TAS5086_VOLUME_CONTROL 0x09 /* Volume control register */ |
| 82 | #define TAS5086_MOD_LIMIT 0x10 /* Modulation limit register */ |
| 83 | #define TAS5086_PWM_START 0x18 /* PWM start register */ |
| 84 | #define TAS5086_SURROUND 0x19 /* Surround register */ |
| 85 | #define TAS5086_SPLIT_CAP_CHARGE 0x1a /* Split cap charge period register */ |
| 86 | #define TAS5086_OSC_TRIM 0x1b /* Oscillator trim register */ |
| 87 | #define TAS5086_BKNDERR 0x1c |
Daniel Mack | 8892d47 | 2013-06-24 16:25:30 +0200 | [diff] [blame] | 88 | #define TAS5086_INPUT_MUX 0x20 |
| 89 | #define TAS5086_PWM_OUTPUT_MUX 0x25 |
| 90 | |
| 91 | #define TAS5086_MAX_REGISTER TAS5086_PWM_OUTPUT_MUX |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 92 | |
Daniel Mack | 79b23b5 | 2013-06-24 16:25:32 +0200 | [diff] [blame] | 93 | #define TAS5086_PWM_START_MIDZ_FOR_START_1 (1 << 7) |
| 94 | #define TAS5086_PWM_START_MIDZ_FOR_START_2 (1 << 6) |
| 95 | #define TAS5086_PWM_START_CHANNEL_MASK (0x3f) |
| 96 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 97 | /* |
| 98 | * Default TAS5086 power-up configuration |
| 99 | */ |
| 100 | static const struct reg_default tas5086_reg_defaults[] = { |
| 101 | { 0x00, 0x6c }, |
| 102 | { 0x01, 0x03 }, |
| 103 | { 0x02, 0x00 }, |
| 104 | { 0x03, 0xa0 }, |
| 105 | { 0x04, 0x05 }, |
| 106 | { 0x05, 0x60 }, |
| 107 | { 0x06, 0x00 }, |
| 108 | { 0x07, 0xff }, |
| 109 | { 0x08, 0x30 }, |
| 110 | { 0x09, 0x30 }, |
| 111 | { 0x0a, 0x30 }, |
| 112 | { 0x0b, 0x30 }, |
| 113 | { 0x0c, 0x30 }, |
| 114 | { 0x0d, 0x30 }, |
| 115 | { 0x0e, 0xb1 }, |
| 116 | { 0x0f, 0x00 }, |
| 117 | { 0x10, 0x02 }, |
| 118 | { 0x11, 0x00 }, |
| 119 | { 0x12, 0x00 }, |
| 120 | { 0x13, 0x00 }, |
| 121 | { 0x14, 0x00 }, |
| 122 | { 0x15, 0x00 }, |
| 123 | { 0x16, 0x00 }, |
| 124 | { 0x17, 0x00 }, |
| 125 | { 0x18, 0x3f }, |
| 126 | { 0x19, 0x00 }, |
| 127 | { 0x1a, 0x18 }, |
| 128 | { 0x1b, 0x82 }, |
| 129 | { 0x1c, 0x05 }, |
| 130 | }; |
| 131 | |
Daniel Mack | 6b36d37 | 2013-06-24 16:25:29 +0200 | [diff] [blame] | 132 | static int tas5086_register_size(struct device *dev, unsigned int reg) |
| 133 | { |
| 134 | switch (reg) { |
Daniel Mack | 9f24dc8 | 2013-06-27 21:59:10 +0200 | [diff] [blame] | 135 | case TAS5086_CLOCK_CONTROL ... TAS5086_BKNDERR: |
Daniel Mack | 6b36d37 | 2013-06-24 16:25:29 +0200 | [diff] [blame] | 136 | return 1; |
Daniel Mack | 8892d47 | 2013-06-24 16:25:30 +0200 | [diff] [blame] | 137 | case TAS5086_INPUT_MUX: |
| 138 | case TAS5086_PWM_OUTPUT_MUX: |
| 139 | return 4; |
Daniel Mack | 6b36d37 | 2013-06-24 16:25:29 +0200 | [diff] [blame] | 140 | } |
| 141 | |
| 142 | dev_err(dev, "Unsupported register address: %d\n", reg); |
| 143 | return 0; |
| 144 | } |
| 145 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 146 | static bool tas5086_accessible_reg(struct device *dev, unsigned int reg) |
| 147 | { |
Daniel Mack | 8892d47 | 2013-06-24 16:25:30 +0200 | [diff] [blame] | 148 | switch (reg) { |
| 149 | case 0x0f: |
| 150 | case 0x11 ... 0x17: |
| 151 | case 0x1d ... 0x1f: |
| 152 | return false; |
| 153 | default: |
| 154 | return true; |
| 155 | } |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 156 | } |
| 157 | |
| 158 | static bool tas5086_volatile_reg(struct device *dev, unsigned int reg) |
| 159 | { |
| 160 | switch (reg) { |
| 161 | case TAS5086_DEV_ID: |
| 162 | case TAS5086_ERROR_STATUS: |
| 163 | return true; |
| 164 | } |
| 165 | |
| 166 | return false; |
| 167 | } |
| 168 | |
| 169 | static bool tas5086_writeable_reg(struct device *dev, unsigned int reg) |
| 170 | { |
| 171 | return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID); |
| 172 | } |
| 173 | |
Daniel Mack | 6b36d37 | 2013-06-24 16:25:29 +0200 | [diff] [blame] | 174 | static int tas5086_reg_write(void *context, unsigned int reg, |
| 175 | unsigned int value) |
| 176 | { |
| 177 | struct i2c_client *client = context; |
| 178 | unsigned int i, size; |
| 179 | uint8_t buf[5]; |
| 180 | int ret; |
| 181 | |
| 182 | size = tas5086_register_size(&client->dev, reg); |
| 183 | if (size == 0) |
| 184 | return -EINVAL; |
| 185 | |
| 186 | buf[0] = reg; |
| 187 | |
| 188 | for (i = size; i >= 1; --i) { |
| 189 | buf[i] = value; |
| 190 | value >>= 8; |
| 191 | } |
| 192 | |
| 193 | ret = i2c_master_send(client, buf, size + 1); |
| 194 | if (ret == size + 1) |
| 195 | return 0; |
| 196 | else if (ret < 0) |
| 197 | return ret; |
| 198 | else |
| 199 | return -EIO; |
| 200 | } |
| 201 | |
| 202 | static int tas5086_reg_read(void *context, unsigned int reg, |
| 203 | unsigned int *value) |
| 204 | { |
| 205 | struct i2c_client *client = context; |
| 206 | uint8_t send_buf, recv_buf[4]; |
| 207 | struct i2c_msg msgs[2]; |
| 208 | unsigned int size; |
| 209 | unsigned int i; |
| 210 | int ret; |
| 211 | |
| 212 | size = tas5086_register_size(&client->dev, reg); |
| 213 | if (size == 0) |
| 214 | return -EINVAL; |
| 215 | |
| 216 | send_buf = reg; |
| 217 | |
| 218 | msgs[0].addr = client->addr; |
| 219 | msgs[0].len = sizeof(send_buf); |
| 220 | msgs[0].buf = &send_buf; |
| 221 | msgs[0].flags = 0; |
| 222 | |
| 223 | msgs[1].addr = client->addr; |
| 224 | msgs[1].len = size; |
| 225 | msgs[1].buf = recv_buf; |
| 226 | msgs[1].flags = I2C_M_RD; |
| 227 | |
| 228 | ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| 229 | if (ret < 0) |
| 230 | return ret; |
| 231 | else if (ret != ARRAY_SIZE(msgs)) |
| 232 | return -EIO; |
| 233 | |
| 234 | *value = 0; |
| 235 | |
| 236 | for (i = 0; i < size; i++) { |
| 237 | *value <<= 8; |
| 238 | *value |= recv_buf[i]; |
| 239 | } |
| 240 | |
| 241 | return 0; |
| 242 | } |
| 243 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 244 | static const char * const supply_names[] = { |
| 245 | "dvdd", "avdd" |
| 246 | }; |
| 247 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 248 | struct tas5086_private { |
| 249 | struct regmap *regmap; |
| 250 | unsigned int mclk, sclk; |
| 251 | unsigned int format; |
| 252 | bool deemph; |
Daniel Mack | 648c538 | 2013-10-01 14:48:24 +0200 | [diff] [blame] | 253 | unsigned int charge_period; |
| 254 | unsigned int pwm_start_mid_z; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 255 | /* Current sample rate for de-emphasis control */ |
| 256 | int rate; |
| 257 | /* GPIO driving Reset pin, if any */ |
| 258 | int gpio_nreset; |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 259 | struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 260 | }; |
| 261 | |
| 262 | static int tas5086_deemph[] = { 0, 32000, 44100, 48000 }; |
| 263 | |
| 264 | static int tas5086_set_deemph(struct snd_soc_codec *codec) |
| 265 | { |
| 266 | struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); |
| 267 | int i, val = 0; |
| 268 | |
Axel Lin | 9425e9d | 2015-07-23 23:13:36 +0800 | [diff] [blame] | 269 | if (priv->deemph) { |
| 270 | for (i = 0; i < ARRAY_SIZE(tas5086_deemph); i++) { |
| 271 | if (tas5086_deemph[i] == priv->rate) { |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 272 | val = i; |
Axel Lin | 9425e9d | 2015-07-23 23:13:36 +0800 | [diff] [blame] | 273 | break; |
| 274 | } |
| 275 | } |
| 276 | } |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 277 | |
| 278 | return regmap_update_bits(priv->regmap, TAS5086_SYS_CONTROL_1, |
| 279 | TAS5086_DEEMPH_MASK, val); |
| 280 | } |
| 281 | |
| 282 | static int tas5086_get_deemph(struct snd_kcontrol *kcontrol, |
| 283 | struct snd_ctl_elem_value *ucontrol) |
| 284 | { |
Lars-Peter Clausen | ea53bf7 | 2014-03-18 09:02:04 +0100 | [diff] [blame] | 285 | struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 286 | struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); |
| 287 | |
Takashi Iwai | 4c523ef | 2015-03-10 12:39:08 +0100 | [diff] [blame] | 288 | ucontrol->value.integer.value[0] = priv->deemph; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 289 | |
| 290 | return 0; |
| 291 | } |
| 292 | |
| 293 | static int tas5086_put_deemph(struct snd_kcontrol *kcontrol, |
| 294 | struct snd_ctl_elem_value *ucontrol) |
| 295 | { |
Lars-Peter Clausen | ea53bf7 | 2014-03-18 09:02:04 +0100 | [diff] [blame] | 296 | struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 297 | struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); |
| 298 | |
Takashi Iwai | 4c523ef | 2015-03-10 12:39:08 +0100 | [diff] [blame] | 299 | priv->deemph = ucontrol->value.integer.value[0]; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 300 | |
| 301 | return tas5086_set_deemph(codec); |
| 302 | } |
| 303 | |
| 304 | |
| 305 | static int tas5086_set_dai_sysclk(struct snd_soc_dai *codec_dai, |
| 306 | int clk_id, unsigned int freq, int dir) |
| 307 | { |
| 308 | struct snd_soc_codec *codec = codec_dai->codec; |
| 309 | struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); |
| 310 | |
| 311 | switch (clk_id) { |
| 312 | case TAS5086_CLK_IDX_MCLK: |
| 313 | priv->mclk = freq; |
| 314 | break; |
| 315 | case TAS5086_CLK_IDX_SCLK: |
| 316 | priv->sclk = freq; |
| 317 | break; |
| 318 | } |
| 319 | |
| 320 | return 0; |
| 321 | } |
| 322 | |
| 323 | static int tas5086_set_dai_fmt(struct snd_soc_dai *codec_dai, |
| 324 | unsigned int format) |
| 325 | { |
| 326 | struct snd_soc_codec *codec = codec_dai->codec; |
| 327 | struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); |
| 328 | |
| 329 | /* The TAS5086 can only be slave to all clocks */ |
| 330 | if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) { |
| 331 | dev_err(codec->dev, "Invalid clocking mode\n"); |
| 332 | return -EINVAL; |
| 333 | } |
| 334 | |
| 335 | /* we need to refer to the data format from hw_params() */ |
| 336 | priv->format = format; |
| 337 | |
| 338 | return 0; |
| 339 | } |
| 340 | |
| 341 | static const int tas5086_sample_rates[] = { |
| 342 | 32000, 38000, 44100, 48000, 88200, 96000, 176400, 192000 |
| 343 | }; |
| 344 | |
| 345 | static const int tas5086_ratios[] = { |
| 346 | 64, 128, 192, 256, 384, 512 |
| 347 | }; |
| 348 | |
| 349 | static int index_in_array(const int *array, int len, int needle) |
| 350 | { |
| 351 | int i; |
| 352 | |
| 353 | for (i = 0; i < len; i++) |
| 354 | if (array[i] == needle) |
| 355 | return i; |
| 356 | |
| 357 | return -ENOENT; |
| 358 | } |
| 359 | |
| 360 | static int tas5086_hw_params(struct snd_pcm_substream *substream, |
| 361 | struct snd_pcm_hw_params *params, |
| 362 | struct snd_soc_dai *dai) |
| 363 | { |
| 364 | struct snd_soc_codec *codec = dai->codec; |
| 365 | struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); |
Dan Carpenter | 28dbd16 | 2013-03-13 08:32:53 +0300 | [diff] [blame] | 366 | int val; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 367 | int ret; |
| 368 | |
| 369 | priv->rate = params_rate(params); |
| 370 | |
| 371 | /* Look up the sample rate and refer to the offset in the list */ |
| 372 | val = index_in_array(tas5086_sample_rates, |
| 373 | ARRAY_SIZE(tas5086_sample_rates), priv->rate); |
| 374 | |
| 375 | if (val < 0) { |
| 376 | dev_err(codec->dev, "Invalid sample rate\n"); |
| 377 | return -EINVAL; |
| 378 | } |
| 379 | |
| 380 | ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, |
| 381 | TAS5086_CLOCK_RATE_MASK, |
| 382 | TAS5086_CLOCK_RATE(val)); |
| 383 | if (ret < 0) |
| 384 | return ret; |
| 385 | |
| 386 | /* MCLK / Fs ratio */ |
| 387 | val = index_in_array(tas5086_ratios, ARRAY_SIZE(tas5086_ratios), |
| 388 | priv->mclk / priv->rate); |
| 389 | if (val < 0) { |
Colin Ian King | e563751 | 2016-08-24 07:48:06 +0100 | [diff] [blame^] | 390 | dev_err(codec->dev, "Invalid MCLK / Fs ratio\n"); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 391 | return -EINVAL; |
| 392 | } |
| 393 | |
| 394 | ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, |
| 395 | TAS5086_CLOCK_RATIO_MASK, |
| 396 | TAS5086_CLOCK_RATIO(val)); |
| 397 | if (ret < 0) |
| 398 | return ret; |
| 399 | |
| 400 | |
| 401 | ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, |
| 402 | TAS5086_CLOCK_SCLK_RATIO_48, |
| 403 | (priv->sclk == 48 * priv->rate) ? |
| 404 | TAS5086_CLOCK_SCLK_RATIO_48 : 0); |
| 405 | if (ret < 0) |
| 406 | return ret; |
| 407 | |
| 408 | /* |
| 409 | * The chip has a very unituitive register mapping and muxes information |
| 410 | * about data format and sample depth into the same register, but not on |
| 411 | * a logical bit-boundary. Hence, we have to refer to the format passed |
| 412 | * in the set_dai_fmt() callback and set up everything from here. |
| 413 | * |
| 414 | * First, determine the 'base' value, using the format ... |
| 415 | */ |
| 416 | switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) { |
| 417 | case SND_SOC_DAIFMT_RIGHT_J: |
| 418 | val = 0x00; |
| 419 | break; |
| 420 | case SND_SOC_DAIFMT_I2S: |
| 421 | val = 0x03; |
| 422 | break; |
| 423 | case SND_SOC_DAIFMT_LEFT_J: |
| 424 | val = 0x06; |
| 425 | break; |
| 426 | default: |
| 427 | dev_err(codec->dev, "Invalid DAI format\n"); |
| 428 | return -EINVAL; |
| 429 | } |
| 430 | |
| 431 | /* ... then add the offset for the sample bit depth. */ |
Mark Brown | c665330 | 2014-07-31 12:47:45 +0100 | [diff] [blame] | 432 | switch (params_width(params)) { |
| 433 | case 16: |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 434 | val += 0; |
| 435 | break; |
Mark Brown | c665330 | 2014-07-31 12:47:45 +0100 | [diff] [blame] | 436 | case 20: |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 437 | val += 1; |
| 438 | break; |
Mark Brown | c665330 | 2014-07-31 12:47:45 +0100 | [diff] [blame] | 439 | case 24: |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 440 | val += 2; |
| 441 | break; |
| 442 | default: |
| 443 | dev_err(codec->dev, "Invalid bit width\n"); |
| 444 | return -EINVAL; |
Joe Perches | 1d198f2 | 2013-10-08 15:55:45 -0700 | [diff] [blame] | 445 | } |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 446 | |
| 447 | ret = regmap_write(priv->regmap, TAS5086_SERIAL_DATA_IF, val); |
| 448 | if (ret < 0) |
| 449 | return ret; |
| 450 | |
| 451 | /* clock is considered valid now */ |
| 452 | ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, |
| 453 | TAS5086_CLOCK_VALID, TAS5086_CLOCK_VALID); |
| 454 | if (ret < 0) |
| 455 | return ret; |
| 456 | |
| 457 | return tas5086_set_deemph(codec); |
| 458 | } |
| 459 | |
| 460 | static int tas5086_mute_stream(struct snd_soc_dai *dai, int mute, int stream) |
| 461 | { |
| 462 | struct snd_soc_codec *codec = dai->codec; |
| 463 | struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); |
| 464 | unsigned int val = 0; |
| 465 | |
| 466 | if (mute) |
| 467 | val = TAS5086_SOFT_MUTE_ALL; |
| 468 | |
| 469 | return regmap_write(priv->regmap, TAS5086_SOFT_MUTE, val); |
| 470 | } |
| 471 | |
Daniel Mack | d5fd3cc | 2013-10-01 14:48:25 +0200 | [diff] [blame] | 472 | static void tas5086_reset(struct tas5086_private *priv) |
| 473 | { |
| 474 | if (gpio_is_valid(priv->gpio_nreset)) { |
| 475 | /* Reset codec - minimum assertion time is 400ns */ |
| 476 | gpio_direction_output(priv->gpio_nreset, 0); |
| 477 | udelay(1); |
| 478 | gpio_set_value(priv->gpio_nreset, 1); |
| 479 | |
| 480 | /* Codec needs ~15ms to wake up */ |
| 481 | msleep(15); |
| 482 | } |
| 483 | } |
| 484 | |
| 485 | /* charge period values in microseconds */ |
| 486 | static const int tas5086_charge_period[] = { |
| 487 | 13000, 16900, 23400, 31200, 41600, 54600, 72800, 96200, |
| 488 | 130000, 156000, 234000, 312000, 416000, 546000, 728000, 962000, |
| 489 | 1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000, |
| 490 | }; |
| 491 | |
| 492 | static int tas5086_init(struct device *dev, struct tas5086_private *priv) |
| 493 | { |
| 494 | int ret, i; |
| 495 | |
| 496 | /* |
| 497 | * If any of the channels is configured to start in Mid-Z mode, |
| 498 | * configure 'part 1' of the PWM starts to use Mid-Z, and tell |
| 499 | * all configured mid-z channels to start start under 'part 1'. |
| 500 | */ |
| 501 | if (priv->pwm_start_mid_z) |
| 502 | regmap_write(priv->regmap, TAS5086_PWM_START, |
| 503 | TAS5086_PWM_START_MIDZ_FOR_START_1 | |
| 504 | priv->pwm_start_mid_z); |
| 505 | |
| 506 | /* lookup and set split-capacitor charge period */ |
| 507 | if (priv->charge_period == 0) { |
| 508 | regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0); |
| 509 | } else { |
| 510 | i = index_in_array(tas5086_charge_period, |
| 511 | ARRAY_SIZE(tas5086_charge_period), |
| 512 | priv->charge_period); |
| 513 | if (i >= 0) |
| 514 | regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, |
| 515 | i + 0x08); |
| 516 | else |
| 517 | dev_warn(dev, |
| 518 | "Invalid split-cap charge period of %d ns.\n", |
| 519 | priv->charge_period); |
| 520 | } |
| 521 | |
| 522 | /* enable factory trim */ |
| 523 | ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00); |
| 524 | if (ret < 0) |
| 525 | return ret; |
| 526 | |
| 527 | /* start all channels */ |
| 528 | ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20); |
| 529 | if (ret < 0) |
| 530 | return ret; |
| 531 | |
| 532 | /* mute all channels for now */ |
| 533 | ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE, |
| 534 | TAS5086_SOFT_MUTE_ALL); |
| 535 | if (ret < 0) |
| 536 | return ret; |
| 537 | |
| 538 | return 0; |
| 539 | } |
| 540 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 541 | /* TAS5086 controls */ |
| 542 | static const DECLARE_TLV_DB_SCALE(tas5086_dac_tlv, -10350, 50, 1); |
| 543 | |
| 544 | static const struct snd_kcontrol_new tas5086_controls[] = { |
| 545 | SOC_SINGLE_TLV("Master Playback Volume", TAS5086_MASTER_VOL, |
| 546 | 0, 0xff, 1, tas5086_dac_tlv), |
| 547 | SOC_DOUBLE_R_TLV("Channel 1/2 Playback Volume", |
| 548 | TAS5086_CHANNEL_VOL(0), TAS5086_CHANNEL_VOL(1), |
| 549 | 0, 0xff, 1, tas5086_dac_tlv), |
| 550 | SOC_DOUBLE_R_TLV("Channel 3/4 Playback Volume", |
| 551 | TAS5086_CHANNEL_VOL(2), TAS5086_CHANNEL_VOL(3), |
| 552 | 0, 0xff, 1, tas5086_dac_tlv), |
| 553 | SOC_DOUBLE_R_TLV("Channel 5/6 Playback Volume", |
| 554 | TAS5086_CHANNEL_VOL(4), TAS5086_CHANNEL_VOL(5), |
| 555 | 0, 0xff, 1, tas5086_dac_tlv), |
| 556 | SOC_SINGLE_BOOL_EXT("De-emphasis Switch", 0, |
| 557 | tas5086_get_deemph, tas5086_put_deemph), |
| 558 | }; |
| 559 | |
Daniel Mack | 18710ac | 2013-06-24 16:25:31 +0200 | [diff] [blame] | 560 | /* Input mux controls */ |
| 561 | static const char *tas5086_dapm_sdin_texts[] = |
| 562 | { |
| 563 | "SDIN1-L", "SDIN1-R", "SDIN2-L", "SDIN2-R", |
| 564 | "SDIN3-L", "SDIN3-R", "Ground (0)", "nc" |
| 565 | }; |
| 566 | |
| 567 | static const struct soc_enum tas5086_dapm_input_mux_enum[] = { |
| 568 | SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 20, 8, tas5086_dapm_sdin_texts), |
| 569 | SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 16, 8, tas5086_dapm_sdin_texts), |
| 570 | SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 12, 8, tas5086_dapm_sdin_texts), |
| 571 | SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 8, 8, tas5086_dapm_sdin_texts), |
| 572 | SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 4, 8, tas5086_dapm_sdin_texts), |
| 573 | SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 0, 8, tas5086_dapm_sdin_texts), |
| 574 | }; |
| 575 | |
| 576 | static const struct snd_kcontrol_new tas5086_dapm_input_mux_controls[] = { |
| 577 | SOC_DAPM_ENUM("Channel 1 input", tas5086_dapm_input_mux_enum[0]), |
| 578 | SOC_DAPM_ENUM("Channel 2 input", tas5086_dapm_input_mux_enum[1]), |
| 579 | SOC_DAPM_ENUM("Channel 3 input", tas5086_dapm_input_mux_enum[2]), |
| 580 | SOC_DAPM_ENUM("Channel 4 input", tas5086_dapm_input_mux_enum[3]), |
| 581 | SOC_DAPM_ENUM("Channel 5 input", tas5086_dapm_input_mux_enum[4]), |
| 582 | SOC_DAPM_ENUM("Channel 6 input", tas5086_dapm_input_mux_enum[5]), |
| 583 | }; |
| 584 | |
| 585 | /* Output mux controls */ |
| 586 | static const char *tas5086_dapm_channel_texts[] = |
| 587 | { "Channel 1 Mux", "Channel 2 Mux", "Channel 3 Mux", |
| 588 | "Channel 4 Mux", "Channel 5 Mux", "Channel 6 Mux" }; |
| 589 | |
| 590 | static const struct soc_enum tas5086_dapm_output_mux_enum[] = { |
| 591 | SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 20, 6, tas5086_dapm_channel_texts), |
| 592 | SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 16, 6, tas5086_dapm_channel_texts), |
| 593 | SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 12, 6, tas5086_dapm_channel_texts), |
| 594 | SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 8, 6, tas5086_dapm_channel_texts), |
| 595 | SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 4, 6, tas5086_dapm_channel_texts), |
| 596 | SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 0, 6, tas5086_dapm_channel_texts), |
| 597 | }; |
| 598 | |
| 599 | static const struct snd_kcontrol_new tas5086_dapm_output_mux_controls[] = { |
| 600 | SOC_DAPM_ENUM("PWM1 Output", tas5086_dapm_output_mux_enum[0]), |
| 601 | SOC_DAPM_ENUM("PWM2 Output", tas5086_dapm_output_mux_enum[1]), |
| 602 | SOC_DAPM_ENUM("PWM3 Output", tas5086_dapm_output_mux_enum[2]), |
| 603 | SOC_DAPM_ENUM("PWM4 Output", tas5086_dapm_output_mux_enum[3]), |
| 604 | SOC_DAPM_ENUM("PWM5 Output", tas5086_dapm_output_mux_enum[4]), |
| 605 | SOC_DAPM_ENUM("PWM6 Output", tas5086_dapm_output_mux_enum[5]), |
| 606 | }; |
| 607 | |
| 608 | static const struct snd_soc_dapm_widget tas5086_dapm_widgets[] = { |
| 609 | SND_SOC_DAPM_INPUT("SDIN1-L"), |
| 610 | SND_SOC_DAPM_INPUT("SDIN1-R"), |
| 611 | SND_SOC_DAPM_INPUT("SDIN2-L"), |
| 612 | SND_SOC_DAPM_INPUT("SDIN2-R"), |
| 613 | SND_SOC_DAPM_INPUT("SDIN3-L"), |
| 614 | SND_SOC_DAPM_INPUT("SDIN3-R"), |
| 615 | SND_SOC_DAPM_INPUT("SDIN4-L"), |
| 616 | SND_SOC_DAPM_INPUT("SDIN4-R"), |
| 617 | |
| 618 | SND_SOC_DAPM_OUTPUT("PWM1"), |
| 619 | SND_SOC_DAPM_OUTPUT("PWM2"), |
| 620 | SND_SOC_DAPM_OUTPUT("PWM3"), |
| 621 | SND_SOC_DAPM_OUTPUT("PWM4"), |
| 622 | SND_SOC_DAPM_OUTPUT("PWM5"), |
| 623 | SND_SOC_DAPM_OUTPUT("PWM6"), |
| 624 | |
| 625 | SND_SOC_DAPM_MUX("Channel 1 Mux", SND_SOC_NOPM, 0, 0, |
| 626 | &tas5086_dapm_input_mux_controls[0]), |
| 627 | SND_SOC_DAPM_MUX("Channel 2 Mux", SND_SOC_NOPM, 0, 0, |
| 628 | &tas5086_dapm_input_mux_controls[1]), |
| 629 | SND_SOC_DAPM_MUX("Channel 3 Mux", SND_SOC_NOPM, 0, 0, |
| 630 | &tas5086_dapm_input_mux_controls[2]), |
| 631 | SND_SOC_DAPM_MUX("Channel 4 Mux", SND_SOC_NOPM, 0, 0, |
| 632 | &tas5086_dapm_input_mux_controls[3]), |
| 633 | SND_SOC_DAPM_MUX("Channel 5 Mux", SND_SOC_NOPM, 0, 0, |
| 634 | &tas5086_dapm_input_mux_controls[4]), |
| 635 | SND_SOC_DAPM_MUX("Channel 6 Mux", SND_SOC_NOPM, 0, 0, |
| 636 | &tas5086_dapm_input_mux_controls[5]), |
| 637 | |
| 638 | SND_SOC_DAPM_MUX("PWM1 Mux", SND_SOC_NOPM, 0, 0, |
| 639 | &tas5086_dapm_output_mux_controls[0]), |
| 640 | SND_SOC_DAPM_MUX("PWM2 Mux", SND_SOC_NOPM, 0, 0, |
| 641 | &tas5086_dapm_output_mux_controls[1]), |
| 642 | SND_SOC_DAPM_MUX("PWM3 Mux", SND_SOC_NOPM, 0, 0, |
| 643 | &tas5086_dapm_output_mux_controls[2]), |
| 644 | SND_SOC_DAPM_MUX("PWM4 Mux", SND_SOC_NOPM, 0, 0, |
| 645 | &tas5086_dapm_output_mux_controls[3]), |
| 646 | SND_SOC_DAPM_MUX("PWM5 Mux", SND_SOC_NOPM, 0, 0, |
| 647 | &tas5086_dapm_output_mux_controls[4]), |
| 648 | SND_SOC_DAPM_MUX("PWM6 Mux", SND_SOC_NOPM, 0, 0, |
| 649 | &tas5086_dapm_output_mux_controls[5]), |
| 650 | }; |
| 651 | |
| 652 | static const struct snd_soc_dapm_route tas5086_dapm_routes[] = { |
| 653 | /* SDIN inputs -> channel muxes */ |
| 654 | { "Channel 1 Mux", "SDIN1-L", "SDIN1-L" }, |
| 655 | { "Channel 1 Mux", "SDIN1-R", "SDIN1-R" }, |
| 656 | { "Channel 1 Mux", "SDIN2-L", "SDIN2-L" }, |
| 657 | { "Channel 1 Mux", "SDIN2-R", "SDIN2-R" }, |
| 658 | { "Channel 1 Mux", "SDIN3-L", "SDIN3-L" }, |
| 659 | { "Channel 1 Mux", "SDIN3-R", "SDIN3-R" }, |
| 660 | |
| 661 | { "Channel 2 Mux", "SDIN1-L", "SDIN1-L" }, |
| 662 | { "Channel 2 Mux", "SDIN1-R", "SDIN1-R" }, |
| 663 | { "Channel 2 Mux", "SDIN2-L", "SDIN2-L" }, |
| 664 | { "Channel 2 Mux", "SDIN2-R", "SDIN2-R" }, |
| 665 | { "Channel 2 Mux", "SDIN3-L", "SDIN3-L" }, |
| 666 | { "Channel 2 Mux", "SDIN3-R", "SDIN3-R" }, |
| 667 | |
| 668 | { "Channel 2 Mux", "SDIN1-L", "SDIN1-L" }, |
| 669 | { "Channel 2 Mux", "SDIN1-R", "SDIN1-R" }, |
| 670 | { "Channel 2 Mux", "SDIN2-L", "SDIN2-L" }, |
| 671 | { "Channel 2 Mux", "SDIN2-R", "SDIN2-R" }, |
| 672 | { "Channel 2 Mux", "SDIN3-L", "SDIN3-L" }, |
| 673 | { "Channel 2 Mux", "SDIN3-R", "SDIN3-R" }, |
| 674 | |
| 675 | { "Channel 3 Mux", "SDIN1-L", "SDIN1-L" }, |
| 676 | { "Channel 3 Mux", "SDIN1-R", "SDIN1-R" }, |
| 677 | { "Channel 3 Mux", "SDIN2-L", "SDIN2-L" }, |
| 678 | { "Channel 3 Mux", "SDIN2-R", "SDIN2-R" }, |
| 679 | { "Channel 3 Mux", "SDIN3-L", "SDIN3-L" }, |
| 680 | { "Channel 3 Mux", "SDIN3-R", "SDIN3-R" }, |
| 681 | |
| 682 | { "Channel 4 Mux", "SDIN1-L", "SDIN1-L" }, |
| 683 | { "Channel 4 Mux", "SDIN1-R", "SDIN1-R" }, |
| 684 | { "Channel 4 Mux", "SDIN2-L", "SDIN2-L" }, |
| 685 | { "Channel 4 Mux", "SDIN2-R", "SDIN2-R" }, |
| 686 | { "Channel 4 Mux", "SDIN3-L", "SDIN3-L" }, |
| 687 | { "Channel 4 Mux", "SDIN3-R", "SDIN3-R" }, |
| 688 | |
| 689 | { "Channel 5 Mux", "SDIN1-L", "SDIN1-L" }, |
| 690 | { "Channel 5 Mux", "SDIN1-R", "SDIN1-R" }, |
| 691 | { "Channel 5 Mux", "SDIN2-L", "SDIN2-L" }, |
| 692 | { "Channel 5 Mux", "SDIN2-R", "SDIN2-R" }, |
| 693 | { "Channel 5 Mux", "SDIN3-L", "SDIN3-L" }, |
| 694 | { "Channel 5 Mux", "SDIN3-R", "SDIN3-R" }, |
| 695 | |
| 696 | { "Channel 6 Mux", "SDIN1-L", "SDIN1-L" }, |
| 697 | { "Channel 6 Mux", "SDIN1-R", "SDIN1-R" }, |
| 698 | { "Channel 6 Mux", "SDIN2-L", "SDIN2-L" }, |
| 699 | { "Channel 6 Mux", "SDIN2-R", "SDIN2-R" }, |
| 700 | { "Channel 6 Mux", "SDIN3-L", "SDIN3-L" }, |
| 701 | { "Channel 6 Mux", "SDIN3-R", "SDIN3-R" }, |
| 702 | |
| 703 | /* Channel muxes -> PWM muxes */ |
| 704 | { "PWM1 Mux", "Channel 1 Mux", "Channel 1 Mux" }, |
| 705 | { "PWM2 Mux", "Channel 1 Mux", "Channel 1 Mux" }, |
| 706 | { "PWM3 Mux", "Channel 1 Mux", "Channel 1 Mux" }, |
| 707 | { "PWM4 Mux", "Channel 1 Mux", "Channel 1 Mux" }, |
| 708 | { "PWM5 Mux", "Channel 1 Mux", "Channel 1 Mux" }, |
| 709 | { "PWM6 Mux", "Channel 1 Mux", "Channel 1 Mux" }, |
| 710 | |
| 711 | { "PWM1 Mux", "Channel 2 Mux", "Channel 2 Mux" }, |
| 712 | { "PWM2 Mux", "Channel 2 Mux", "Channel 2 Mux" }, |
| 713 | { "PWM3 Mux", "Channel 2 Mux", "Channel 2 Mux" }, |
| 714 | { "PWM4 Mux", "Channel 2 Mux", "Channel 2 Mux" }, |
| 715 | { "PWM5 Mux", "Channel 2 Mux", "Channel 2 Mux" }, |
| 716 | { "PWM6 Mux", "Channel 2 Mux", "Channel 2 Mux" }, |
| 717 | |
| 718 | { "PWM1 Mux", "Channel 3 Mux", "Channel 3 Mux" }, |
| 719 | { "PWM2 Mux", "Channel 3 Mux", "Channel 3 Mux" }, |
| 720 | { "PWM3 Mux", "Channel 3 Mux", "Channel 3 Mux" }, |
| 721 | { "PWM4 Mux", "Channel 3 Mux", "Channel 3 Mux" }, |
| 722 | { "PWM5 Mux", "Channel 3 Mux", "Channel 3 Mux" }, |
| 723 | { "PWM6 Mux", "Channel 3 Mux", "Channel 3 Mux" }, |
| 724 | |
| 725 | { "PWM1 Mux", "Channel 4 Mux", "Channel 4 Mux" }, |
| 726 | { "PWM2 Mux", "Channel 4 Mux", "Channel 4 Mux" }, |
| 727 | { "PWM3 Mux", "Channel 4 Mux", "Channel 4 Mux" }, |
| 728 | { "PWM4 Mux", "Channel 4 Mux", "Channel 4 Mux" }, |
| 729 | { "PWM5 Mux", "Channel 4 Mux", "Channel 4 Mux" }, |
| 730 | { "PWM6 Mux", "Channel 4 Mux", "Channel 4 Mux" }, |
| 731 | |
| 732 | { "PWM1 Mux", "Channel 5 Mux", "Channel 5 Mux" }, |
| 733 | { "PWM2 Mux", "Channel 5 Mux", "Channel 5 Mux" }, |
| 734 | { "PWM3 Mux", "Channel 5 Mux", "Channel 5 Mux" }, |
| 735 | { "PWM4 Mux", "Channel 5 Mux", "Channel 5 Mux" }, |
| 736 | { "PWM5 Mux", "Channel 5 Mux", "Channel 5 Mux" }, |
| 737 | { "PWM6 Mux", "Channel 5 Mux", "Channel 5 Mux" }, |
| 738 | |
| 739 | { "PWM1 Mux", "Channel 6 Mux", "Channel 6 Mux" }, |
| 740 | { "PWM2 Mux", "Channel 6 Mux", "Channel 6 Mux" }, |
| 741 | { "PWM3 Mux", "Channel 6 Mux", "Channel 6 Mux" }, |
| 742 | { "PWM4 Mux", "Channel 6 Mux", "Channel 6 Mux" }, |
| 743 | { "PWM5 Mux", "Channel 6 Mux", "Channel 6 Mux" }, |
| 744 | { "PWM6 Mux", "Channel 6 Mux", "Channel 6 Mux" }, |
| 745 | |
| 746 | /* The PWM muxes are directly connected to the PWM outputs */ |
| 747 | { "PWM1", NULL, "PWM1 Mux" }, |
| 748 | { "PWM2", NULL, "PWM2 Mux" }, |
| 749 | { "PWM3", NULL, "PWM3 Mux" }, |
| 750 | { "PWM4", NULL, "PWM4 Mux" }, |
| 751 | { "PWM5", NULL, "PWM5 Mux" }, |
| 752 | { "PWM6", NULL, "PWM6 Mux" }, |
| 753 | |
| 754 | }; |
| 755 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 756 | static const struct snd_soc_dai_ops tas5086_dai_ops = { |
| 757 | .hw_params = tas5086_hw_params, |
| 758 | .set_sysclk = tas5086_set_dai_sysclk, |
| 759 | .set_fmt = tas5086_set_dai_fmt, |
| 760 | .mute_stream = tas5086_mute_stream, |
| 761 | }; |
| 762 | |
| 763 | static struct snd_soc_dai_driver tas5086_dai = { |
| 764 | .name = "tas5086-hifi", |
| 765 | .playback = { |
| 766 | .stream_name = "Playback", |
| 767 | .channels_min = 2, |
| 768 | .channels_max = 6, |
| 769 | .rates = TAS5086_PCM_RATES, |
| 770 | .formats = TAS5086_PCM_FORMATS, |
| 771 | }, |
| 772 | .ops = &tas5086_dai_ops, |
| 773 | }; |
| 774 | |
| 775 | #ifdef CONFIG_PM |
Daniel Mack | 25c84cc | 2013-10-01 14:48:26 +0200 | [diff] [blame] | 776 | static int tas5086_soc_suspend(struct snd_soc_codec *codec) |
| 777 | { |
| 778 | struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); |
| 779 | int ret; |
| 780 | |
| 781 | /* Shut down all channels */ |
| 782 | ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x60); |
| 783 | if (ret < 0) |
| 784 | return ret; |
| 785 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 786 | regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); |
| 787 | |
Daniel Mack | 25c84cc | 2013-10-01 14:48:26 +0200 | [diff] [blame] | 788 | return 0; |
| 789 | } |
| 790 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 791 | static int tas5086_soc_resume(struct snd_soc_codec *codec) |
| 792 | { |
| 793 | struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); |
Daniel Mack | 25c84cc | 2013-10-01 14:48:26 +0200 | [diff] [blame] | 794 | int ret; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 795 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 796 | ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies); |
| 797 | if (ret < 0) |
| 798 | return ret; |
| 799 | |
Daniel Mack | 25c84cc | 2013-10-01 14:48:26 +0200 | [diff] [blame] | 800 | tas5086_reset(priv); |
| 801 | regcache_mark_dirty(priv->regmap); |
| 802 | |
| 803 | ret = tas5086_init(codec->dev, priv); |
| 804 | if (ret < 0) |
| 805 | return ret; |
| 806 | |
| 807 | ret = regcache_sync(priv->regmap); |
| 808 | if (ret < 0) |
| 809 | return ret; |
| 810 | |
| 811 | return 0; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 812 | } |
| 813 | #else |
Daniel Mack | 25c84cc | 2013-10-01 14:48:26 +0200 | [diff] [blame] | 814 | #define tas5086_soc_suspend NULL |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 815 | #define tas5086_soc_resume NULL |
| 816 | #endif /* CONFIG_PM */ |
| 817 | |
| 818 | #ifdef CONFIG_OF |
| 819 | static const struct of_device_id tas5086_dt_ids[] = { |
| 820 | { .compatible = "ti,tas5086", }, |
| 821 | { } |
| 822 | }; |
| 823 | MODULE_DEVICE_TABLE(of, tas5086_dt_ids); |
| 824 | #endif |
| 825 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 826 | static int tas5086_probe(struct snd_soc_codec *codec) |
| 827 | { |
| 828 | struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 829 | int i, ret; |
| 830 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 831 | ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies); |
| 832 | if (ret < 0) { |
| 833 | dev_err(codec->dev, "Failed to enable regulators: %d\n", ret); |
| 834 | return ret; |
| 835 | } |
| 836 | |
Daniel Mack | 648c538 | 2013-10-01 14:48:24 +0200 | [diff] [blame] | 837 | priv->pwm_start_mid_z = 0; |
| 838 | priv->charge_period = 1300000; /* hardware default is 1300 ms */ |
| 839 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 840 | if (of_match_device(of_match_ptr(tas5086_dt_ids), codec->dev)) { |
| 841 | struct device_node *of_node = codec->dev->of_node; |
Daniel Mack | d5fd3cc | 2013-10-01 14:48:25 +0200 | [diff] [blame] | 842 | |
Daniel Mack | 648c538 | 2013-10-01 14:48:24 +0200 | [diff] [blame] | 843 | of_property_read_u32(of_node, "ti,charge-period", |
| 844 | &priv->charge_period); |
Daniel Mack | 79b23b5 | 2013-06-24 16:25:32 +0200 | [diff] [blame] | 845 | |
| 846 | for (i = 0; i < 6; i++) { |
| 847 | char name[25]; |
| 848 | |
| 849 | snprintf(name, sizeof(name), |
| 850 | "ti,mid-z-channel-%d", i + 1); |
| 851 | |
| 852 | if (of_get_property(of_node, name, NULL) != NULL) |
Daniel Mack | 648c538 | 2013-10-01 14:48:24 +0200 | [diff] [blame] | 853 | priv->pwm_start_mid_z |= 1 << i; |
Daniel Mack | 79b23b5 | 2013-06-24 16:25:32 +0200 | [diff] [blame] | 854 | } |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 855 | } |
| 856 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 857 | tas5086_reset(priv); |
Daniel Mack | d5fd3cc | 2013-10-01 14:48:25 +0200 | [diff] [blame] | 858 | ret = tas5086_init(codec->dev, priv); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 859 | if (ret < 0) |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 860 | goto exit_disable_regulators; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 861 | |
| 862 | /* set master volume to 0 dB */ |
| 863 | ret = regmap_write(priv->regmap, TAS5086_MASTER_VOL, 0x30); |
| 864 | if (ret < 0) |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 865 | goto exit_disable_regulators; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 866 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 867 | return 0; |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 868 | |
| 869 | exit_disable_regulators: |
| 870 | regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); |
| 871 | |
| 872 | return ret; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 873 | } |
| 874 | |
| 875 | static int tas5086_remove(struct snd_soc_codec *codec) |
| 876 | { |
| 877 | struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); |
| 878 | |
| 879 | if (gpio_is_valid(priv->gpio_nreset)) |
| 880 | /* Set codec to the reset state */ |
| 881 | gpio_set_value(priv->gpio_nreset, 0); |
| 882 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 883 | regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); |
| 884 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 885 | return 0; |
| 886 | }; |
| 887 | |
| 888 | static struct snd_soc_codec_driver soc_codec_dev_tas5086 = { |
| 889 | .probe = tas5086_probe, |
| 890 | .remove = tas5086_remove, |
Daniel Mack | 25c84cc | 2013-10-01 14:48:26 +0200 | [diff] [blame] | 891 | .suspend = tas5086_soc_suspend, |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 892 | .resume = tas5086_soc_resume, |
| 893 | .controls = tas5086_controls, |
| 894 | .num_controls = ARRAY_SIZE(tas5086_controls), |
Daniel Mack | 18710ac | 2013-06-24 16:25:31 +0200 | [diff] [blame] | 895 | .dapm_widgets = tas5086_dapm_widgets, |
| 896 | .num_dapm_widgets = ARRAY_SIZE(tas5086_dapm_widgets), |
| 897 | .dapm_routes = tas5086_dapm_routes, |
| 898 | .num_dapm_routes = ARRAY_SIZE(tas5086_dapm_routes), |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 899 | }; |
| 900 | |
| 901 | static const struct i2c_device_id tas5086_i2c_id[] = { |
| 902 | { "tas5086", 0 }, |
| 903 | { } |
| 904 | }; |
| 905 | MODULE_DEVICE_TABLE(i2c, tas5086_i2c_id); |
| 906 | |
| 907 | static const struct regmap_config tas5086_regmap = { |
| 908 | .reg_bits = 8, |
Daniel Mack | 8892d47 | 2013-06-24 16:25:30 +0200 | [diff] [blame] | 909 | .val_bits = 32, |
| 910 | .max_register = TAS5086_MAX_REGISTER, |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 911 | .reg_defaults = tas5086_reg_defaults, |
| 912 | .num_reg_defaults = ARRAY_SIZE(tas5086_reg_defaults), |
| 913 | .cache_type = REGCACHE_RBTREE, |
| 914 | .volatile_reg = tas5086_volatile_reg, |
| 915 | .writeable_reg = tas5086_writeable_reg, |
| 916 | .readable_reg = tas5086_accessible_reg, |
Daniel Mack | 6b36d37 | 2013-06-24 16:25:29 +0200 | [diff] [blame] | 917 | .reg_read = tas5086_reg_read, |
| 918 | .reg_write = tas5086_reg_write, |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 919 | }; |
| 920 | |
| 921 | static int tas5086_i2c_probe(struct i2c_client *i2c, |
| 922 | const struct i2c_device_id *id) |
| 923 | { |
| 924 | struct tas5086_private *priv; |
| 925 | struct device *dev = &i2c->dev; |
| 926 | int gpio_nreset = -EINVAL; |
| 927 | int i, ret; |
| 928 | |
| 929 | priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| 930 | if (!priv) |
| 931 | return -ENOMEM; |
| 932 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 933 | for (i = 0; i < ARRAY_SIZE(supply_names); i++) |
| 934 | priv->supplies[i].supply = supply_names[i]; |
| 935 | |
| 936 | ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies), |
| 937 | priv->supplies); |
| 938 | if (ret < 0) { |
| 939 | dev_err(dev, "Failed to get regulators: %d\n", ret); |
| 940 | return ret; |
| 941 | } |
| 942 | |
Daniel Mack | 6b36d37 | 2013-06-24 16:25:29 +0200 | [diff] [blame] | 943 | priv->regmap = devm_regmap_init(dev, NULL, i2c, &tas5086_regmap); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 944 | if (IS_ERR(priv->regmap)) { |
| 945 | ret = PTR_ERR(priv->regmap); |
| 946 | dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret); |
| 947 | return ret; |
| 948 | } |
| 949 | |
| 950 | i2c_set_clientdata(i2c, priv); |
| 951 | |
| 952 | if (of_match_device(of_match_ptr(tas5086_dt_ids), dev)) { |
| 953 | struct device_node *of_node = dev->of_node; |
| 954 | gpio_nreset = of_get_named_gpio(of_node, "reset-gpio", 0); |
| 955 | } |
| 956 | |
| 957 | if (gpio_is_valid(gpio_nreset)) |
| 958 | if (devm_gpio_request(dev, gpio_nreset, "TAS5086 Reset")) |
| 959 | gpio_nreset = -EINVAL; |
| 960 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 961 | priv->gpio_nreset = gpio_nreset; |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 962 | |
| 963 | ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies); |
| 964 | if (ret < 0) { |
| 965 | dev_err(dev, "Failed to enable regulators: %d\n", ret); |
| 966 | return ret; |
| 967 | } |
| 968 | |
Daniel Mack | d5fd3cc | 2013-10-01 14:48:25 +0200 | [diff] [blame] | 969 | tas5086_reset(priv); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 970 | |
| 971 | /* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */ |
| 972 | ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i); |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 973 | if (ret == 0 && i != 0x3) { |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 974 | dev_err(dev, |
| 975 | "Failed to identify TAS5086 codec (got %02x)\n", i); |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 976 | ret = -ENODEV; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 977 | } |
| 978 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 979 | /* |
| 980 | * The chip has been identified, so we can turn off the power |
| 981 | * again until the dai link is set up. |
| 982 | */ |
| 983 | regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); |
| 984 | |
| 985 | if (ret == 0) |
| 986 | ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_tas5086, |
| 987 | &tas5086_dai, 1); |
| 988 | |
| 989 | return ret; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 990 | } |
| 991 | |
| 992 | static int tas5086_i2c_remove(struct i2c_client *i2c) |
| 993 | { |
| 994 | snd_soc_unregister_codec(&i2c->dev); |
| 995 | return 0; |
| 996 | } |
| 997 | |
| 998 | static struct i2c_driver tas5086_i2c_driver = { |
| 999 | .driver = { |
| 1000 | .name = "tas5086", |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 1001 | .of_match_table = of_match_ptr(tas5086_dt_ids), |
| 1002 | }, |
| 1003 | .id_table = tas5086_i2c_id, |
| 1004 | .probe = tas5086_i2c_probe, |
| 1005 | .remove = tas5086_i2c_remove, |
| 1006 | }; |
| 1007 | |
Wei Yongjun | c300d6d | 2013-03-12 21:36:24 +0800 | [diff] [blame] | 1008 | module_i2c_driver(tas5086_i2c_driver); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 1009 | |
| 1010 | MODULE_AUTHOR("Daniel Mack <zonque@gmail.com>"); |
| 1011 | MODULE_DESCRIPTION("Texas Instruments TAS5086 ALSA SoC Codec Driver"); |
| 1012 | MODULE_LICENSE("GPL"); |