blob: 92bbfec9b107a0ec5ee55205b9272ce9e67caa74 [file] [log] [blame]
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001/*
2 * sgtl5000.c -- SGTL5000 ALSA SoC Audio driver
3 *
4 * Copyright 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11#include <linux/module.h>
12#include <linux/moduleparam.h>
13#include <linux/init.h>
14#include <linux/delay.h>
15#include <linux/slab.h>
16#include <linux/pm.h>
17#include <linux/i2c.h>
18#include <linux/clk.h>
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +080019#include <linux/regulator/driver.h>
20#include <linux/regulator/machine.h>
21#include <linux/regulator/consumer.h>
Shawn Guo58e49422011-07-22 00:28:51 +080022#include <linux/of_device.h>
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +080023#include <sound/core.h>
24#include <sound/tlv.h>
25#include <sound/pcm.h>
26#include <sound/pcm_params.h>
27#include <sound/soc.h>
28#include <sound/soc-dapm.h>
29#include <sound/initval.h>
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +080030
31#include "sgtl5000.h"
32
33#define SGTL5000_DAP_REG_OFFSET 0x0100
34#define SGTL5000_MAX_REG_OFFSET 0x013A
35
Wolfram Sang151798f2011-08-02 19:42:19 +020036/* default value of sgtl5000 registers */
37static const u16 sgtl5000_regs[SGTL5000_MAX_REG_OFFSET] = {
38 [SGTL5000_CHIP_CLK_CTRL] = 0x0008,
39 [SGTL5000_CHIP_I2S_CTRL] = 0x0010,
40 [SGTL5000_CHIP_SSS_CTRL] = 0x0008,
41 [SGTL5000_CHIP_DAC_VOL] = 0x3c3c,
42 [SGTL5000_CHIP_PAD_STRENGTH] = 0x015f,
43 [SGTL5000_CHIP_ANA_HP_CTRL] = 0x1818,
44 [SGTL5000_CHIP_ANA_CTRL] = 0x0111,
45 [SGTL5000_CHIP_LINE_OUT_VOL] = 0x0404,
46 [SGTL5000_CHIP_ANA_POWER] = 0x7060,
47 [SGTL5000_CHIP_PLL_CTRL] = 0x5000,
48 [SGTL5000_DAP_BASS_ENHANCE] = 0x0040,
49 [SGTL5000_DAP_BASS_ENHANCE_CTRL] = 0x051f,
50 [SGTL5000_DAP_SURROUND] = 0x0040,
51 [SGTL5000_DAP_EQ_BASS_BAND0] = 0x002f,
52 [SGTL5000_DAP_EQ_BASS_BAND1] = 0x002f,
53 [SGTL5000_DAP_EQ_BASS_BAND2] = 0x002f,
54 [SGTL5000_DAP_EQ_BASS_BAND3] = 0x002f,
55 [SGTL5000_DAP_EQ_BASS_BAND4] = 0x002f,
56 [SGTL5000_DAP_MAIN_CHAN] = 0x8000,
57 [SGTL5000_DAP_AVC_CTRL] = 0x0510,
58 [SGTL5000_DAP_AVC_THRESHOLD] = 0x1473,
59 [SGTL5000_DAP_AVC_ATTACK] = 0x0028,
60 [SGTL5000_DAP_AVC_DECAY] = 0x0050,
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +080061};
62
63/* regulator supplies for sgtl5000, VDDD is an optional external supply */
64enum sgtl5000_regulator_supplies {
65 VDDA,
66 VDDIO,
67 VDDD,
68 SGTL5000_SUPPLY_NUM
69};
70
71/* vddd is optional supply */
72static const char *supply_names[SGTL5000_SUPPLY_NUM] = {
73 "VDDA",
74 "VDDIO",
75 "VDDD"
76};
77
78#define LDO_CONSUMER_NAME "VDDD_LDO"
79#define LDO_VOLTAGE 1200000
80
81static struct regulator_consumer_supply ldo_consumer[] = {
82 REGULATOR_SUPPLY(LDO_CONSUMER_NAME, NULL),
83};
84
Mark Brown61a142b2011-02-28 14:33:01 +000085static struct regulator_init_data ldo_init_data = {
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +080086 .constraints = {
Fabio Estevamcd041f62012-04-03 18:05:20 -030087 .min_uV = 1200000,
88 .max_uV = 1200000,
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +080089 .valid_modes_mask = REGULATOR_MODE_NORMAL,
90 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
91 },
92 .num_consumer_supplies = 1,
93 .consumer_supplies = &ldo_consumer[0],
94};
95
96/*
97 * sgtl5000 internal ldo regulator,
98 * enabled when VDDD not provided
99 */
100struct ldo_regulator {
101 struct regulator_desc desc;
102 struct regulator_dev *dev;
103 int voltage;
104 void *codec_data;
105 bool enabled;
106};
107
108/* sgtl5000 private structure in codec */
109struct sgtl5000_priv {
110 int sysclk; /* sysclk rate */
111 int master; /* i2s master or not */
112 int fmt; /* i2s data format */
113 struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM];
114 struct ldo_regulator *ldo;
115};
116
117/*
118 * mic_bias power on/off share the same register bits with
119 * output impedance of mic bias, when power on mic bias, we
120 * need reclaim it to impedance value.
121 * 0x0 = Powered off
122 * 0x1 = 2Kohm
123 * 0x2 = 4Kohm
124 * 0x3 = 8Kohm
125 */
126static int mic_bias_event(struct snd_soc_dapm_widget *w,
127 struct snd_kcontrol *kcontrol, int event)
128{
129 switch (event) {
130 case SND_SOC_DAPM_POST_PMU:
131 /* change mic bias resistor to 4Kohm */
132 snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
Axel Lindc56c5a2011-10-19 11:00:42 +0800133 SGTL5000_BIAS_R_MASK,
134 SGTL5000_BIAS_R_4k << SGTL5000_BIAS_R_SHIFT);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800135 break;
136
137 case SND_SOC_DAPM_PRE_PMD:
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800138 snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
Axel Lindc56c5a2011-10-19 11:00:42 +0800139 SGTL5000_BIAS_R_MASK, 0);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800140 break;
141 }
142 return 0;
143}
144
145/*
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800146 * As manual described, ADC/DAC only works when VAG powerup,
147 * So enabled VAG before ADC/DAC up.
148 * In power down case, we need wait 400ms when vag fully ramped down.
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800149 */
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800150static int power_vag_event(struct snd_soc_dapm_widget *w,
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800151 struct snd_kcontrol *kcontrol, int event)
152{
153 switch (event) {
154 case SND_SOC_DAPM_PRE_PMU:
155 snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
156 SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
157 break;
158
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800159 case SND_SOC_DAPM_POST_PMD:
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800160 snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
161 SGTL5000_VAG_POWERUP, 0);
162 msleep(400);
163 break;
164 default:
165 break;
166 }
167
168 return 0;
169}
170
171/* input sources for ADC */
172static const char *adc_mux_text[] = {
173 "MIC_IN", "LINE_IN"
174};
175
176static const struct soc_enum adc_enum =
177SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 2, 2, adc_mux_text);
178
179static const struct snd_kcontrol_new adc_mux =
180SOC_DAPM_ENUM("Capture Mux", adc_enum);
181
182/* input sources for DAC */
183static const char *dac_mux_text[] = {
184 "DAC", "LINE_IN"
185};
186
187static const struct soc_enum dac_enum =
188SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 6, 2, dac_mux_text);
189
190static const struct snd_kcontrol_new dac_mux =
191SOC_DAPM_ENUM("Headphone Mux", dac_enum);
192
193static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
194 SND_SOC_DAPM_INPUT("LINE_IN"),
195 SND_SOC_DAPM_INPUT("MIC_IN"),
196
197 SND_SOC_DAPM_OUTPUT("HP_OUT"),
198 SND_SOC_DAPM_OUTPUT("LINE_OUT"),
199
Mark Brown8fc8ec92012-03-28 20:51:43 +0100200 SND_SOC_DAPM_SUPPLY("Mic Bias", SGTL5000_CHIP_MIC_CTRL, 8, 0,
201 mic_bias_event,
202 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800203
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800204 SND_SOC_DAPM_PGA("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0),
205 SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0),
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800206
207 SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
208 SND_SOC_DAPM_MUX("Headphone Mux", SND_SOC_NOPM, 0, 0, &dac_mux),
209
210 /* aif for i2s input */
211 SND_SOC_DAPM_AIF_IN("AIFIN", "Playback",
212 0, SGTL5000_CHIP_DIG_POWER,
213 0, 0),
214
215 /* aif for i2s output */
216 SND_SOC_DAPM_AIF_OUT("AIFOUT", "Capture",
217 0, SGTL5000_CHIP_DIG_POWER,
218 1, 0),
219
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800220 SND_SOC_DAPM_SUPPLY("VAG_POWER", SGTL5000_CHIP_ANA_POWER, 7, 0,
221 power_vag_event,
222 SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800223
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800224 SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800225 SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
226};
227
228/* routes for sgtl5000 */
Fabio Estevam89989632012-01-22 14:49:42 -0200229static const struct snd_soc_dapm_route sgtl5000_dapm_routes[] = {
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800230 {"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */
231 {"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */
232
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800233 {"ADC", NULL, "VAG_POWER"},
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800234 {"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */
235 {"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */
236
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800237 {"DAC", NULL, "VAG_POWER"},
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800238 {"DAC", NULL, "AIFIN"}, /* i2s-->dac,skip audio mux */
239 {"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */
240 {"LO", NULL, "DAC"}, /* dac --> line_out */
241
Dong Aishengeef69ac2012-07-27 19:18:42 +0800242 {"LINE_IN", NULL, "VAG_POWER"},
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800243 {"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */
244 {"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */
245
246 {"LINE_OUT", NULL, "LO"},
247 {"HP_OUT", NULL, "HP"},
248};
249
250/* custom function to fetch info of PCM playback volume */
251static int dac_info_volsw(struct snd_kcontrol *kcontrol,
252 struct snd_ctl_elem_info *uinfo)
253{
254 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
255 uinfo->count = 2;
256 uinfo->value.integer.min = 0;
257 uinfo->value.integer.max = 0xfc - 0x3c;
258 return 0;
259}
260
261/*
262 * custom function to get of PCM playback volume
263 *
264 * dac volume register
265 * 15-------------8-7--------------0
266 * | R channel vol | L channel vol |
267 * -------------------------------
268 *
269 * PCM volume with 0.5017 dB steps from 0 to -90 dB
270 *
271 * register values map to dB
272 * 0x3B and less = Reserved
273 * 0x3C = 0 dB
274 * 0x3D = -0.5 dB
275 * 0xF0 = -90 dB
276 * 0xFC and greater = Muted
277 *
278 * register value map to userspace value
279 *
280 * register value 0x3c(0dB) 0xf0(-90dB)0xfc
281 * ------------------------------
282 * userspace value 0xc0 0
283 */
284static int dac_get_volsw(struct snd_kcontrol *kcontrol,
285 struct snd_ctl_elem_value *ucontrol)
286{
287 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
288 int reg;
289 int l;
290 int r;
291
292 reg = snd_soc_read(codec, SGTL5000_CHIP_DAC_VOL);
293
294 /* get left channel volume */
295 l = (reg & SGTL5000_DAC_VOL_LEFT_MASK) >> SGTL5000_DAC_VOL_LEFT_SHIFT;
296
297 /* get right channel volume */
298 r = (reg & SGTL5000_DAC_VOL_RIGHT_MASK) >> SGTL5000_DAC_VOL_RIGHT_SHIFT;
299
300 /* make sure value fall in (0x3c,0xfc) */
301 l = clamp(l, 0x3c, 0xfc);
302 r = clamp(r, 0x3c, 0xfc);
303
304 /* invert it and map to userspace value */
305 l = 0xfc - l;
306 r = 0xfc - r;
307
308 ucontrol->value.integer.value[0] = l;
309 ucontrol->value.integer.value[1] = r;
310
311 return 0;
312}
313
314/*
315 * custom function to put of PCM playback volume
316 *
317 * dac volume register
318 * 15-------------8-7--------------0
319 * | R channel vol | L channel vol |
320 * -------------------------------
321 *
322 * PCM volume with 0.5017 dB steps from 0 to -90 dB
323 *
324 * register values map to dB
325 * 0x3B and less = Reserved
326 * 0x3C = 0 dB
327 * 0x3D = -0.5 dB
328 * 0xF0 = -90 dB
329 * 0xFC and greater = Muted
330 *
331 * userspace value map to register value
332 *
333 * userspace value 0xc0 0
334 * ------------------------------
335 * register value 0x3c(0dB) 0xf0(-90dB)0xfc
336 */
337static int dac_put_volsw(struct snd_kcontrol *kcontrol,
338 struct snd_ctl_elem_value *ucontrol)
339{
340 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
341 int reg;
342 int l;
343 int r;
344
345 l = ucontrol->value.integer.value[0];
346 r = ucontrol->value.integer.value[1];
347
348 /* make sure userspace volume fall in (0, 0xfc-0x3c) */
349 l = clamp(l, 0, 0xfc - 0x3c);
350 r = clamp(r, 0, 0xfc - 0x3c);
351
352 /* invert it, get the value can be set to register */
353 l = 0xfc - l;
354 r = 0xfc - r;
355
356 /* shift to get the register value */
357 reg = l << SGTL5000_DAC_VOL_LEFT_SHIFT |
358 r << SGTL5000_DAC_VOL_RIGHT_SHIFT;
359
360 snd_soc_write(codec, SGTL5000_CHIP_DAC_VOL, reg);
361
362 return 0;
363}
364
365static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0);
366
367/* tlv for mic gain, 0db 20db 30db 40db */
368static const unsigned int mic_gain_tlv[] = {
Clemens Ladisch740fb9d2011-11-20 15:12:26 +0100369 TLV_DB_RANGE_HEAD(2),
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800370 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
371 1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0),
372};
373
374/* tlv for hp volume, -51.5db to 12.0db, step .5db */
375static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0);
376
377static const struct snd_kcontrol_new sgtl5000_snd_controls[] = {
378 /* SOC_DOUBLE_S8_TLV with invert */
379 {
380 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
381 .name = "PCM Playback Volume",
382 .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |
383 SNDRV_CTL_ELEM_ACCESS_READWRITE,
384 .info = dac_info_volsw,
385 .get = dac_get_volsw,
386 .put = dac_put_volsw,
387 },
388
389 SOC_DOUBLE("Capture Volume", SGTL5000_CHIP_ANA_ADC_CTRL, 0, 4, 0xf, 0),
390 SOC_SINGLE_TLV("Capture Attenuate Switch (-6dB)",
391 SGTL5000_CHIP_ANA_ADC_CTRL,
392 8, 2, 0, capture_6db_attenuate),
393 SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0),
394
395 SOC_DOUBLE_TLV("Headphone Playback Volume",
396 SGTL5000_CHIP_ANA_HP_CTRL,
397 0, 8,
398 0x7f, 1,
399 headphone_volume),
400 SOC_SINGLE("Headphone Playback ZC Switch", SGTL5000_CHIP_ANA_CTRL,
401 5, 1, 0),
402
403 SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL,
Fabio Estevamb50684d2012-12-23 15:45:31 -0200404 0, 3, 0, mic_gain_tlv),
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800405};
406
407/* mute the codec used by alsa core */
408static int sgtl5000_digital_mute(struct snd_soc_dai *codec_dai, int mute)
409{
410 struct snd_soc_codec *codec = codec_dai->codec;
411 u16 adcdac_ctrl = SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT;
412
413 snd_soc_update_bits(codec, SGTL5000_CHIP_ADCDAC_CTRL,
414 adcdac_ctrl, mute ? adcdac_ctrl : 0);
415
416 return 0;
417}
418
419/* set codec format */
420static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
421{
422 struct snd_soc_codec *codec = codec_dai->codec;
423 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
424 u16 i2sctl = 0;
425
426 sgtl5000->master = 0;
427 /*
428 * i2s clock and frame master setting.
429 * ONLY support:
430 * - clock and frame slave,
431 * - clock and frame master
432 */
433 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
434 case SND_SOC_DAIFMT_CBS_CFS:
435 break;
436 case SND_SOC_DAIFMT_CBM_CFM:
437 i2sctl |= SGTL5000_I2S_MASTER;
438 sgtl5000->master = 1;
439 break;
440 default:
441 return -EINVAL;
442 }
443
444 /* setting i2s data format */
445 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
446 case SND_SOC_DAIFMT_DSP_A:
447 i2sctl |= SGTL5000_I2S_MODE_PCM;
448 break;
449 case SND_SOC_DAIFMT_DSP_B:
450 i2sctl |= SGTL5000_I2S_MODE_PCM;
451 i2sctl |= SGTL5000_I2S_LRALIGN;
452 break;
453 case SND_SOC_DAIFMT_I2S:
454 i2sctl |= SGTL5000_I2S_MODE_I2S_LJ;
455 break;
456 case SND_SOC_DAIFMT_RIGHT_J:
457 i2sctl |= SGTL5000_I2S_MODE_RJ;
458 i2sctl |= SGTL5000_I2S_LRPOL;
459 break;
460 case SND_SOC_DAIFMT_LEFT_J:
461 i2sctl |= SGTL5000_I2S_MODE_I2S_LJ;
462 i2sctl |= SGTL5000_I2S_LRALIGN;
463 break;
464 default:
465 return -EINVAL;
466 }
467
468 sgtl5000->fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
469
470 /* Clock inversion */
471 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
472 case SND_SOC_DAIFMT_NB_NF:
473 break;
474 case SND_SOC_DAIFMT_IB_NF:
475 i2sctl |= SGTL5000_I2S_SCLK_INV;
476 break;
477 default:
478 return -EINVAL;
479 }
480
481 snd_soc_write(codec, SGTL5000_CHIP_I2S_CTRL, i2sctl);
482
483 return 0;
484}
485
486/* set codec sysclk */
487static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai,
488 int clk_id, unsigned int freq, int dir)
489{
490 struct snd_soc_codec *codec = codec_dai->codec;
491 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
492
493 switch (clk_id) {
494 case SGTL5000_SYSCLK:
495 sgtl5000->sysclk = freq;
496 break;
497 default:
498 return -EINVAL;
499 }
500
501 return 0;
502}
503
504/*
505 * set clock according to i2s frame clock,
506 * sgtl5000 provide 2 clock sources.
507 * 1. sys_mclk. sample freq can only configure to
508 * 1/256, 1/384, 1/512 of sys_mclk.
509 * 2. pll. can derive any audio clocks.
510 *
511 * clock setting rules:
512 * 1. in slave mode, only sys_mclk can use.
513 * 2. as constraint by sys_mclk, sample freq should
514 * set to 32k, 44.1k and above.
515 * 3. using sys_mclk prefer to pll to save power.
516 */
517static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
518{
519 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
520 int clk_ctl = 0;
521 int sys_fs; /* sample freq */
522
523 /*
524 * sample freq should be divided by frame clock,
525 * if frame clock lower than 44.1khz, sample feq should set to
526 * 32khz or 44.1khz.
527 */
528 switch (frame_rate) {
529 case 8000:
530 case 16000:
531 sys_fs = 32000;
532 break;
533 case 11025:
534 case 22050:
535 sys_fs = 44100;
536 break;
537 default:
538 sys_fs = frame_rate;
539 break;
540 }
541
542 /* set divided factor of frame clock */
543 switch (sys_fs / frame_rate) {
544 case 4:
545 clk_ctl |= SGTL5000_RATE_MODE_DIV_4 << SGTL5000_RATE_MODE_SHIFT;
546 break;
547 case 2:
548 clk_ctl |= SGTL5000_RATE_MODE_DIV_2 << SGTL5000_RATE_MODE_SHIFT;
549 break;
550 case 1:
551 clk_ctl |= SGTL5000_RATE_MODE_DIV_1 << SGTL5000_RATE_MODE_SHIFT;
552 break;
553 default:
554 return -EINVAL;
555 }
556
557 /* set the sys_fs according to frame rate */
558 switch (sys_fs) {
559 case 32000:
560 clk_ctl |= SGTL5000_SYS_FS_32k << SGTL5000_SYS_FS_SHIFT;
561 break;
562 case 44100:
563 clk_ctl |= SGTL5000_SYS_FS_44_1k << SGTL5000_SYS_FS_SHIFT;
564 break;
565 case 48000:
566 clk_ctl |= SGTL5000_SYS_FS_48k << SGTL5000_SYS_FS_SHIFT;
567 break;
568 case 96000:
569 clk_ctl |= SGTL5000_SYS_FS_96k << SGTL5000_SYS_FS_SHIFT;
570 break;
571 default:
572 dev_err(codec->dev, "frame rate %d not supported\n",
573 frame_rate);
574 return -EINVAL;
575 }
576
577 /*
578 * calculate the divider of mclk/sample_freq,
579 * factor of freq =96k can only be 256, since mclk in range (12m,27m)
580 */
581 switch (sgtl5000->sysclk / sys_fs) {
582 case 256:
583 clk_ctl |= SGTL5000_MCLK_FREQ_256FS <<
584 SGTL5000_MCLK_FREQ_SHIFT;
585 break;
586 case 384:
587 clk_ctl |= SGTL5000_MCLK_FREQ_384FS <<
588 SGTL5000_MCLK_FREQ_SHIFT;
589 break;
590 case 512:
591 clk_ctl |= SGTL5000_MCLK_FREQ_512FS <<
592 SGTL5000_MCLK_FREQ_SHIFT;
593 break;
594 default:
595 /* if mclk not satisify the divider, use pll */
596 if (sgtl5000->master) {
597 clk_ctl |= SGTL5000_MCLK_FREQ_PLL <<
598 SGTL5000_MCLK_FREQ_SHIFT;
599 } else {
600 dev_err(codec->dev,
601 "PLL not supported in slave mode\n");
602 return -EINVAL;
603 }
604 }
605
606 /* if using pll, please check manual 6.4.2 for detail */
607 if ((clk_ctl & SGTL5000_MCLK_FREQ_MASK) == SGTL5000_MCLK_FREQ_PLL) {
608 u64 out, t;
609 int div2;
610 int pll_ctl;
611 unsigned int in, int_div, frac_div;
612
613 if (sgtl5000->sysclk > 17000000) {
614 div2 = 1;
615 in = sgtl5000->sysclk / 2;
616 } else {
617 div2 = 0;
618 in = sgtl5000->sysclk;
619 }
620 if (sys_fs == 44100)
621 out = 180633600;
622 else
623 out = 196608000;
624 t = do_div(out, in);
625 int_div = out;
626 t *= 2048;
627 do_div(t, in);
628 frac_div = t;
629 pll_ctl = int_div << SGTL5000_PLL_INT_DIV_SHIFT |
630 frac_div << SGTL5000_PLL_FRAC_DIV_SHIFT;
631
632 snd_soc_write(codec, SGTL5000_CHIP_PLL_CTRL, pll_ctl);
633 if (div2)
634 snd_soc_update_bits(codec,
635 SGTL5000_CHIP_CLK_TOP_CTRL,
636 SGTL5000_INPUT_FREQ_DIV2,
637 SGTL5000_INPUT_FREQ_DIV2);
638 else
639 snd_soc_update_bits(codec,
640 SGTL5000_CHIP_CLK_TOP_CTRL,
641 SGTL5000_INPUT_FREQ_DIV2,
642 0);
643
644 /* power up pll */
645 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
646 SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
647 SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP);
648 } else {
649 /* power down pll */
650 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
651 SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
652 0);
653 }
654
655 /* if using pll, clk_ctrl must be set after pll power up */
656 snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
657
658 return 0;
659}
660
661/*
662 * Set PCM DAI bit size and sample rate.
663 * input: params_rate, params_fmt
664 */
665static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
666 struct snd_pcm_hw_params *params,
667 struct snd_soc_dai *dai)
668{
Mark Browne6968a12012-04-04 15:58:16 +0100669 struct snd_soc_codec *codec = dai->codec;
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800670 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
671 int channels = params_channels(params);
672 int i2s_ctl = 0;
673 int stereo;
674 int ret;
675
676 /* sysclk should already set */
677 if (!sgtl5000->sysclk) {
678 dev_err(codec->dev, "%s: set sysclk first!\n", __func__);
679 return -EFAULT;
680 }
681
682 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
683 stereo = SGTL5000_DAC_STEREO;
684 else
685 stereo = SGTL5000_ADC_STEREO;
686
687 /* set mono to save power */
688 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, stereo,
689 channels == 1 ? 0 : stereo);
690
691 /* set codec clock base on lrclk */
692 ret = sgtl5000_set_clock(codec, params_rate(params));
693 if (ret)
694 return ret;
695
696 /* set i2s data format */
697 switch (params_format(params)) {
698 case SNDRV_PCM_FORMAT_S16_LE:
699 if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
700 return -EINVAL;
701 i2s_ctl |= SGTL5000_I2S_DLEN_16 << SGTL5000_I2S_DLEN_SHIFT;
702 i2s_ctl |= SGTL5000_I2S_SCLKFREQ_32FS <<
703 SGTL5000_I2S_SCLKFREQ_SHIFT;
704 break;
705 case SNDRV_PCM_FORMAT_S20_3LE:
706 i2s_ctl |= SGTL5000_I2S_DLEN_20 << SGTL5000_I2S_DLEN_SHIFT;
707 i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
708 SGTL5000_I2S_SCLKFREQ_SHIFT;
709 break;
710 case SNDRV_PCM_FORMAT_S24_LE:
711 i2s_ctl |= SGTL5000_I2S_DLEN_24 << SGTL5000_I2S_DLEN_SHIFT;
712 i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
713 SGTL5000_I2S_SCLKFREQ_SHIFT;
714 break;
715 case SNDRV_PCM_FORMAT_S32_LE:
716 if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
717 return -EINVAL;
718 i2s_ctl |= SGTL5000_I2S_DLEN_32 << SGTL5000_I2S_DLEN_SHIFT;
719 i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
720 SGTL5000_I2S_SCLKFREQ_SHIFT;
721 break;
722 default:
723 return -EINVAL;
724 }
725
Axel Lin33cb92c2011-10-21 09:54:43 +0800726 snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL,
727 SGTL5000_I2S_DLEN_MASK | SGTL5000_I2S_SCLKFREQ_MASK,
728 i2s_ctl);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800729
730 return 0;
731}
732
Mark Brown333802e2011-03-22 12:02:33 +0000733#ifdef CONFIG_REGULATOR
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800734static int ldo_regulator_is_enabled(struct regulator_dev *dev)
735{
736 struct ldo_regulator *ldo = rdev_get_drvdata(dev);
737
738 return ldo->enabled;
739}
740
741static int ldo_regulator_enable(struct regulator_dev *dev)
742{
743 struct ldo_regulator *ldo = rdev_get_drvdata(dev);
744 struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data;
745 int reg;
746
747 if (ldo_regulator_is_enabled(dev))
748 return 0;
749
750 /* set regulator value firstly */
751 reg = (1600 - ldo->voltage / 1000) / 50;
752 reg = clamp(reg, 0x0, 0xf);
753
754 /* amend the voltage value, unit: uV */
755 ldo->voltage = (1600 - reg * 50) * 1000;
756
757 /* set voltage to register */
758 snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
Axel Lin064a4bc2011-10-20 18:49:29 +0800759 SGTL5000_LINREG_VDDD_MASK, reg);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800760
761 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
762 SGTL5000_LINEREG_D_POWERUP,
763 SGTL5000_LINEREG_D_POWERUP);
764
765 /* when internal ldo enabled, simple digital power can be disabled */
766 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
767 SGTL5000_LINREG_SIMPLE_POWERUP,
768 0);
769
770 ldo->enabled = 1;
771 return 0;
772}
773
774static int ldo_regulator_disable(struct regulator_dev *dev)
775{
776 struct ldo_regulator *ldo = rdev_get_drvdata(dev);
777 struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data;
778
779 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
780 SGTL5000_LINEREG_D_POWERUP,
781 0);
782
783 /* clear voltage info */
784 snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
Axel Lin064a4bc2011-10-20 18:49:29 +0800785 SGTL5000_LINREG_VDDD_MASK, 0);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800786
787 ldo->enabled = 0;
788
789 return 0;
790}
791
792static int ldo_regulator_get_voltage(struct regulator_dev *dev)
793{
794 struct ldo_regulator *ldo = rdev_get_drvdata(dev);
795
796 return ldo->voltage;
797}
798
799static struct regulator_ops ldo_regulator_ops = {
800 .is_enabled = ldo_regulator_is_enabled,
801 .enable = ldo_regulator_enable,
802 .disable = ldo_regulator_disable,
803 .get_voltage = ldo_regulator_get_voltage,
804};
805
806static int ldo_regulator_register(struct snd_soc_codec *codec,
807 struct regulator_init_data *init_data,
808 int voltage)
809{
810 struct ldo_regulator *ldo;
Axel Lin5b13de72011-10-20 18:32:59 +0800811 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
Mark Brownc1727082012-04-04 00:50:22 +0100812 struct regulator_config config = { };
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800813
814 ldo = kzalloc(sizeof(struct ldo_regulator), GFP_KERNEL);
815
816 if (!ldo) {
817 dev_err(codec->dev, "failed to allocate ldo_regulator\n");
818 return -ENOMEM;
819 }
820
821 ldo->desc.name = kstrdup(dev_name(codec->dev), GFP_KERNEL);
822 if (!ldo->desc.name) {
823 kfree(ldo);
824 dev_err(codec->dev, "failed to allocate decs name memory\n");
825 return -ENOMEM;
826 }
827
828 ldo->desc.type = REGULATOR_VOLTAGE;
829 ldo->desc.owner = THIS_MODULE;
830 ldo->desc.ops = &ldo_regulator_ops;
831 ldo->desc.n_voltages = 1;
832
833 ldo->codec_data = codec;
834 ldo->voltage = voltage;
835
Mark Brownc1727082012-04-04 00:50:22 +0100836 config.dev = codec->dev;
837 config.driver_data = ldo;
838 config.init_data = init_data;
839
840 ldo->dev = regulator_register(&ldo->desc, &config);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800841 if (IS_ERR(ldo->dev)) {
Dan Carpenter62f75aa2011-03-08 14:39:24 +0300842 int ret = PTR_ERR(ldo->dev);
843
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800844 dev_err(codec->dev, "failed to register regulator\n");
845 kfree(ldo->desc.name);
846 kfree(ldo);
847
Dan Carpenter62f75aa2011-03-08 14:39:24 +0300848 return ret;
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800849 }
Axel Lin5b13de72011-10-20 18:32:59 +0800850 sgtl5000->ldo = ldo;
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800851
852 return 0;
853}
854
855static int ldo_regulator_remove(struct snd_soc_codec *codec)
856{
857 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
858 struct ldo_regulator *ldo = sgtl5000->ldo;
859
860 if (!ldo)
861 return 0;
862
863 regulator_unregister(ldo->dev);
864 kfree(ldo->desc.name);
865 kfree(ldo);
866
867 return 0;
868}
Mark Brown333802e2011-03-22 12:02:33 +0000869#else
870static int ldo_regulator_register(struct snd_soc_codec *codec,
871 struct regulator_init_data *init_data,
872 int voltage)
873{
Wolfram Sang09bddc82011-07-18 17:53:04 +0200874 dev_err(codec->dev, "this setup needs regulator support in the kernel\n");
Mark Brown333802e2011-03-22 12:02:33 +0000875 return -EINVAL;
876}
877
878static int ldo_regulator_remove(struct snd_soc_codec *codec)
879{
880 return 0;
881}
882#endif
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800883
884/*
885 * set dac bias
886 * common state changes:
887 * startup:
888 * off --> standby --> prepare --> on
889 * standby --> prepare --> on
890 *
891 * stop:
892 * on --> prepare --> standby
893 */
894static int sgtl5000_set_bias_level(struct snd_soc_codec *codec,
895 enum snd_soc_bias_level level)
896{
897 int ret;
898 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
899
900 switch (level) {
901 case SND_SOC_BIAS_ON:
902 case SND_SOC_BIAS_PREPARE:
903 break;
904 case SND_SOC_BIAS_STANDBY:
905 if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
906 ret = regulator_bulk_enable(
907 ARRAY_SIZE(sgtl5000->supplies),
908 sgtl5000->supplies);
909 if (ret)
910 return ret;
911 udelay(10);
912 }
913
914 break;
915 case SND_SOC_BIAS_OFF:
916 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
917 sgtl5000->supplies);
918 break;
919 }
920
921 codec->dapm.bias_level = level;
922 return 0;
923}
924
925#define SGTL5000_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
926 SNDRV_PCM_FMTBIT_S20_3LE |\
927 SNDRV_PCM_FMTBIT_S24_LE |\
928 SNDRV_PCM_FMTBIT_S32_LE)
929
Lars-Peter Clausen85e76522011-11-23 11:40:40 +0100930static const struct snd_soc_dai_ops sgtl5000_ops = {
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800931 .hw_params = sgtl5000_pcm_hw_params,
932 .digital_mute = sgtl5000_digital_mute,
933 .set_fmt = sgtl5000_set_dai_fmt,
934 .set_sysclk = sgtl5000_set_dai_sysclk,
935};
936
937static struct snd_soc_dai_driver sgtl5000_dai = {
938 .name = "sgtl5000",
939 .playback = {
940 .stream_name = "Playback",
941 .channels_min = 1,
942 .channels_max = 2,
943 /*
944 * only support 8~48K + 96K,
945 * TODO modify hw_param to support more
946 */
947 .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
948 .formats = SGTL5000_FORMATS,
949 },
950 .capture = {
951 .stream_name = "Capture",
952 .channels_min = 1,
953 .channels_max = 2,
954 .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
955 .formats = SGTL5000_FORMATS,
956 },
957 .ops = &sgtl5000_ops,
958 .symmetric_rates = 1,
959};
960
961static int sgtl5000_volatile_register(struct snd_soc_codec *codec,
962 unsigned int reg)
963{
964 switch (reg) {
965 case SGTL5000_CHIP_ID:
966 case SGTL5000_CHIP_ADCDAC_CTRL:
967 case SGTL5000_CHIP_ANA_STATUS:
968 return 1;
969 }
970
971 return 0;
972}
973
974#ifdef CONFIG_SUSPEND
Lars-Peter Clausen84b315e2011-12-02 10:18:28 +0100975static int sgtl5000_suspend(struct snd_soc_codec *codec)
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800976{
977 sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
978
979 return 0;
980}
981
982/*
983 * restore all sgtl5000 registers,
984 * since a big hole between dap and regular registers,
985 * we will restore them respectively.
986 */
987static int sgtl5000_restore_regs(struct snd_soc_codec *codec)
988{
989 u16 *cache = codec->reg_cache;
Wolfram Sang151798f2011-08-02 19:42:19 +0200990 u16 reg;
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800991
992 /* restore regular registers */
Wolfram Sang151798f2011-08-02 19:42:19 +0200993 for (reg = 0; reg <= SGTL5000_CHIP_SHORT_CTRL; reg += 2) {
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800994
Zeng Zhaomingbb362e22012-01-18 13:58:07 +0800995 /* These regs should restore in particular order */
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800996 if (reg == SGTL5000_CHIP_ANA_POWER ||
997 reg == SGTL5000_CHIP_CLK_CTRL ||
998 reg == SGTL5000_CHIP_LINREG_CTRL ||
999 reg == SGTL5000_CHIP_LINE_OUT_CTRL ||
Zeng Zhaomingbb362e22012-01-18 13:58:07 +08001000 reg == SGTL5000_CHIP_REF_CTRL)
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001001 continue;
1002
Wolfram Sang151798f2011-08-02 19:42:19 +02001003 snd_soc_write(codec, reg, cache[reg]);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001004 }
1005
1006 /* restore dap registers */
Wolfram Sang151798f2011-08-02 19:42:19 +02001007 for (reg = SGTL5000_DAP_REG_OFFSET; reg < SGTL5000_MAX_REG_OFFSET; reg += 2)
1008 snd_soc_write(codec, reg, cache[reg]);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001009
1010 /*
Zeng Zhaomingbb362e22012-01-18 13:58:07 +08001011 * restore these regs according to the power setting sequence in
1012 * sgtl5000_set_power_regs() and clock setting sequence in
1013 * sgtl5000_set_clock().
1014 *
1015 * The order of restore is:
1016 * 1. SGTL5000_CHIP_CLK_CTRL MCLK_FREQ bits (1:0) should be restore after
1017 * SGTL5000_CHIP_ANA_POWER PLL bits set
1018 * 2. SGTL5000_CHIP_LINREG_CTRL should be set before
1019 * SGTL5000_CHIP_ANA_POWER LINREG_D restored
1020 * 3. SGTL5000_CHIP_REF_CTRL controls Analog Ground Voltage,
1021 * prefer to resotre it after SGTL5000_CHIP_ANA_POWER restored
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001022 */
1023 snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL,
Wolfram Sang151798f2011-08-02 19:42:19 +02001024 cache[SGTL5000_CHIP_LINREG_CTRL]);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001025
1026 snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER,
Wolfram Sang151798f2011-08-02 19:42:19 +02001027 cache[SGTL5000_CHIP_ANA_POWER]);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001028
1029 snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL,
Wolfram Sang151798f2011-08-02 19:42:19 +02001030 cache[SGTL5000_CHIP_CLK_CTRL]);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001031
1032 snd_soc_write(codec, SGTL5000_CHIP_REF_CTRL,
Wolfram Sang151798f2011-08-02 19:42:19 +02001033 cache[SGTL5000_CHIP_REF_CTRL]);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001034
1035 snd_soc_write(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
Wolfram Sang151798f2011-08-02 19:42:19 +02001036 cache[SGTL5000_CHIP_LINE_OUT_CTRL]);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001037 return 0;
1038}
1039
1040static int sgtl5000_resume(struct snd_soc_codec *codec)
1041{
1042 /* Bring the codec back up to standby to enable regulators */
1043 sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1044
1045 /* Restore registers by cached in memory */
1046 sgtl5000_restore_regs(codec);
1047 return 0;
1048}
1049#else
1050#define sgtl5000_suspend NULL
1051#define sgtl5000_resume NULL
1052#endif /* CONFIG_SUSPEND */
1053
1054/*
1055 * sgtl5000 has 3 internal power supplies:
1056 * 1. VAG, normally set to vdda/2
1057 * 2. chargepump, set to different value
1058 * according to voltage of vdda and vddio
1059 * 3. line out VAG, normally set to vddio/2
1060 *
1061 * and should be set according to:
1062 * 1. vddd provided by external or not
1063 * 2. vdda and vddio voltage value. > 3.1v or not
1064 * 3. chip revision >=0x11 or not. If >=0x11, not use external vddd.
1065 */
1066static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
1067{
1068 int vddd;
1069 int vdda;
1070 int vddio;
1071 u16 ana_pwr;
1072 u16 lreg_ctrl;
1073 int vag;
1074 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1075
1076 vdda = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer);
1077 vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO].consumer);
1078 vddd = regulator_get_voltage(sgtl5000->supplies[VDDD].consumer);
1079
1080 vdda = vdda / 1000;
1081 vddio = vddio / 1000;
1082 vddd = vddd / 1000;
1083
1084 if (vdda <= 0 || vddio <= 0 || vddd < 0) {
1085 dev_err(codec->dev, "regulator voltage not set correctly\n");
1086
1087 return -EINVAL;
1088 }
1089
1090 /* according to datasheet, maximum voltage of supplies */
1091 if (vdda > 3600 || vddio > 3600 || vddd > 1980) {
1092 dev_err(codec->dev,
Fabio Estevamcf1ee982011-12-28 09:55:15 -02001093 "exceed max voltage vdda %dmV vddio %dmV vddd %dmV\n",
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001094 vdda, vddio, vddd);
1095
1096 return -EINVAL;
1097 }
1098
1099 /* reset value */
1100 ana_pwr = snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER);
1101 ana_pwr |= SGTL5000_DAC_STEREO |
1102 SGTL5000_ADC_STEREO |
1103 SGTL5000_REFTOP_POWERUP;
1104 lreg_ctrl = snd_soc_read(codec, SGTL5000_CHIP_LINREG_CTRL);
1105
1106 if (vddio < 3100 && vdda < 3100) {
1107 /* enable internal oscillator used for charge pump */
1108 snd_soc_update_bits(codec, SGTL5000_CHIP_CLK_TOP_CTRL,
1109 SGTL5000_INT_OSC_EN,
1110 SGTL5000_INT_OSC_EN);
1111 /* Enable VDDC charge pump */
1112 ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
1113 } else if (vddio >= 3100 && vdda >= 3100) {
1114 /*
1115 * if vddio and vddd > 3.1v,
1116 * charge pump should be clean before set ana_pwr
1117 */
1118 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
1119 SGTL5000_VDDC_CHRGPMP_POWERUP, 0);
1120
1121 /* VDDC use VDDIO rail */
1122 lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
1123 lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
1124 SGTL5000_VDDC_MAN_ASSN_SHIFT;
1125 }
1126
1127 snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
1128
1129 snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, ana_pwr);
1130
1131 /* set voltage to register */
1132 snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
Axel Lin064a4bc2011-10-20 18:49:29 +08001133 SGTL5000_LINREG_VDDD_MASK, 0x8);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001134
1135 /*
1136 * if vddd linear reg has been enabled,
1137 * simple digital supply should be clear to get
1138 * proper VDDD voltage.
1139 */
1140 if (ana_pwr & SGTL5000_LINEREG_D_POWERUP)
1141 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
1142 SGTL5000_LINREG_SIMPLE_POWERUP,
1143 0);
1144 else
1145 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
1146 SGTL5000_LINREG_SIMPLE_POWERUP |
1147 SGTL5000_STARTUP_POWERUP,
1148 0);
1149
1150 /*
1151 * set ADC/DAC VAG to vdda / 2,
1152 * should stay in range (0.8v, 1.575v)
1153 */
1154 vag = vdda / 2;
1155 if (vag <= SGTL5000_ANA_GND_BASE)
1156 vag = 0;
1157 else if (vag >= SGTL5000_ANA_GND_BASE + SGTL5000_ANA_GND_STP *
1158 (SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT))
1159 vag = SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT;
1160 else
1161 vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP;
1162
1163 snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
Axel Lin33cb92c2011-10-21 09:54:43 +08001164 SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001165
1166 /* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */
1167 vag = vddio / 2;
1168 if (vag <= SGTL5000_LINE_OUT_GND_BASE)
1169 vag = 0;
1170 else if (vag >= SGTL5000_LINE_OUT_GND_BASE +
1171 SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX)
1172 vag = SGTL5000_LINE_OUT_GND_MAX;
1173 else
1174 vag = (vag - SGTL5000_LINE_OUT_GND_BASE) /
1175 SGTL5000_LINE_OUT_GND_STP;
1176
1177 snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
Axel Lin33cb92c2011-10-21 09:54:43 +08001178 SGTL5000_LINE_OUT_CURRENT_MASK |
1179 SGTL5000_LINE_OUT_GND_MASK,
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001180 vag << SGTL5000_LINE_OUT_GND_SHIFT |
1181 SGTL5000_LINE_OUT_CURRENT_360u <<
1182 SGTL5000_LINE_OUT_CURRENT_SHIFT);
1183
1184 return 0;
1185}
1186
Wolfram Sange94a4062011-07-18 17:53:03 +02001187static int sgtl5000_replace_vddd_with_ldo(struct snd_soc_codec *codec)
1188{
1189 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1190 int ret;
1191
1192 /* set internal ldo to 1.2v */
1193 ret = ldo_regulator_register(codec, &ldo_init_data, LDO_VOLTAGE);
1194 if (ret) {
1195 dev_err(codec->dev,
1196 "Failed to register vddd internal supplies: %d\n", ret);
1197 return ret;
1198 }
1199
1200 sgtl5000->supplies[VDDD].supply = LDO_CONSUMER_NAME;
1201
1202 ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sgtl5000->supplies),
1203 sgtl5000->supplies);
1204
1205 if (ret) {
1206 ldo_regulator_remove(codec);
1207 dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
1208 return ret;
1209 }
1210
1211 dev_info(codec->dev, "Using internal LDO instead of VDDD\n");
1212 return 0;
1213}
1214
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001215static int sgtl5000_enable_regulators(struct snd_soc_codec *codec)
1216{
1217 u16 reg;
1218 int ret;
1219 int rev;
1220 int i;
1221 int external_vddd = 0;
1222 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1223
1224 for (i = 0; i < ARRAY_SIZE(sgtl5000->supplies); i++)
1225 sgtl5000->supplies[i].supply = supply_names[i];
1226
1227 ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sgtl5000->supplies),
1228 sgtl5000->supplies);
1229 if (!ret)
1230 external_vddd = 1;
1231 else {
Wolfram Sange94a4062011-07-18 17:53:03 +02001232 ret = sgtl5000_replace_vddd_with_ldo(codec);
1233 if (ret)
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001234 return ret;
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001235 }
1236
1237 ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies),
1238 sgtl5000->supplies);
1239 if (ret)
1240 goto err_regulator_free;
1241
1242 /* wait for all power rails bring up */
1243 udelay(10);
1244
1245 /* read chip information */
1246 reg = snd_soc_read(codec, SGTL5000_CHIP_ID);
1247 if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) !=
1248 SGTL5000_PARTID_PART_ID) {
1249 dev_err(codec->dev,
1250 "Device with ID register %x is not a sgtl5000\n", reg);
1251 ret = -ENODEV;
1252 goto err_regulator_disable;
1253 }
1254
1255 rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT;
Fabio Estevamf2c6e752012-01-16 17:32:21 -02001256 dev_info(codec->dev, "sgtl5000 revision 0x%x\n", rev);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001257
1258 /*
1259 * workaround for revision 0x11 and later,
1260 * roll back to use internal LDO
1261 */
1262 if (external_vddd && rev >= 0x11) {
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001263 /* disable all regulator first */
1264 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
1265 sgtl5000->supplies);
1266 /* free VDDD regulator */
1267 regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
1268 sgtl5000->supplies);
1269
Wolfram Sange94a4062011-07-18 17:53:03 +02001270 ret = sgtl5000_replace_vddd_with_ldo(codec);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001271 if (ret)
1272 return ret;
1273
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001274 ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies),
1275 sgtl5000->supplies);
1276 if (ret)
1277 goto err_regulator_free;
1278
1279 /* wait for all power rails bring up */
1280 udelay(10);
1281 }
1282
1283 return 0;
1284
1285err_regulator_disable:
1286 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
1287 sgtl5000->supplies);
1288err_regulator_free:
1289 regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
1290 sgtl5000->supplies);
1291 if (external_vddd)
1292 ldo_regulator_remove(codec);
1293 return ret;
1294
1295}
1296
1297static int sgtl5000_probe(struct snd_soc_codec *codec)
1298{
1299 int ret;
1300 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1301
1302 /* setup i2c data ops */
1303 ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_I2C);
1304 if (ret < 0) {
1305 dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
1306 return ret;
1307 }
1308
1309 ret = sgtl5000_enable_regulators(codec);
1310 if (ret)
1311 return ret;
1312
1313 /* power up sgtl5000 */
1314 ret = sgtl5000_set_power_regs(codec);
1315 if (ret)
1316 goto err;
1317
1318 /* enable small pop, introduce 400ms delay in turning off */
1319 snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
1320 SGTL5000_SMALL_POP,
1321 SGTL5000_SMALL_POP);
1322
1323 /* disable short cut detector */
1324 snd_soc_write(codec, SGTL5000_CHIP_SHORT_CTRL, 0);
1325
1326 /*
1327 * set i2s as default input of sound switch
1328 * TODO: add sound switch to control and dapm widge.
1329 */
1330 snd_soc_write(codec, SGTL5000_CHIP_SSS_CTRL,
1331 SGTL5000_DAC_SEL_I2S_IN << SGTL5000_DAC_SEL_SHIFT);
1332 snd_soc_write(codec, SGTL5000_CHIP_DIG_POWER,
1333 SGTL5000_ADC_EN | SGTL5000_DAC_EN);
1334
1335 /* enable dac volume ramp by default */
1336 snd_soc_write(codec, SGTL5000_CHIP_ADCDAC_CTRL,
1337 SGTL5000_DAC_VOL_RAMP_EN |
1338 SGTL5000_DAC_MUTE_RIGHT |
1339 SGTL5000_DAC_MUTE_LEFT);
1340
1341 snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, 0x015f);
1342
1343 snd_soc_write(codec, SGTL5000_CHIP_ANA_CTRL,
1344 SGTL5000_HP_ZCD_EN |
1345 SGTL5000_ADC_ZCD_EN);
1346
Fabio Estevamb50684d2012-12-23 15:45:31 -02001347 snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 2);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001348
1349 /*
1350 * disable DAP
1351 * TODO:
1352 * Enable DAP in kcontrol and dapm.
1353 */
1354 snd_soc_write(codec, SGTL5000_DAP_CTRL, 0);
1355
1356 /* leading to standby state */
1357 ret = sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1358 if (ret)
1359 goto err;
1360
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001361 return 0;
1362
1363err:
1364 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
1365 sgtl5000->supplies);
1366 regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
1367 sgtl5000->supplies);
1368 ldo_regulator_remove(codec);
1369
1370 return ret;
1371}
1372
1373static int sgtl5000_remove(struct snd_soc_codec *codec)
1374{
1375 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1376
1377 sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
1378
1379 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
1380 sgtl5000->supplies);
1381 regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
1382 sgtl5000->supplies);
1383 ldo_regulator_remove(codec);
1384
1385 return 0;
1386}
1387
Mark Brown61a142b2011-02-28 14:33:01 +00001388static struct snd_soc_codec_driver sgtl5000_driver = {
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001389 .probe = sgtl5000_probe,
1390 .remove = sgtl5000_remove,
1391 .suspend = sgtl5000_suspend,
1392 .resume = sgtl5000_resume,
1393 .set_bias_level = sgtl5000_set_bias_level,
1394 .reg_cache_size = ARRAY_SIZE(sgtl5000_regs),
1395 .reg_word_size = sizeof(u16),
1396 .reg_cache_step = 2,
1397 .reg_cache_default = sgtl5000_regs,
1398 .volatile_register = sgtl5000_volatile_register,
Fabio Estevam89989632012-01-22 14:49:42 -02001399 .controls = sgtl5000_snd_controls,
1400 .num_controls = ARRAY_SIZE(sgtl5000_snd_controls),
Mark Brown5e0ac522012-01-23 10:16:31 +00001401 .dapm_widgets = sgtl5000_dapm_widgets,
1402 .num_dapm_widgets = ARRAY_SIZE(sgtl5000_dapm_widgets),
1403 .dapm_routes = sgtl5000_dapm_routes,
1404 .num_dapm_routes = ARRAY_SIZE(sgtl5000_dapm_routes),
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001405};
1406
Bill Pemberton7a79e942012-12-07 09:26:37 -05001407static int sgtl5000_i2c_probe(struct i2c_client *client,
1408 const struct i2c_device_id *id)
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001409{
1410 struct sgtl5000_priv *sgtl5000;
1411 int ret;
1412
Fabio Estevam512fa7c2011-12-28 11:30:11 -02001413 sgtl5000 = devm_kzalloc(&client->dev, sizeof(struct sgtl5000_priv),
1414 GFP_KERNEL);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001415 if (!sgtl5000)
1416 return -ENOMEM;
1417
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001418 i2c_set_clientdata(client, sgtl5000);
1419
1420 ret = snd_soc_register_codec(&client->dev,
1421 &sgtl5000_driver, &sgtl5000_dai, 1);
Fabio Estevam512fa7c2011-12-28 11:30:11 -02001422 return ret;
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001423}
1424
Bill Pemberton7a79e942012-12-07 09:26:37 -05001425static int sgtl5000_i2c_remove(struct i2c_client *client)
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001426{
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001427 snd_soc_unregister_codec(&client->dev);
1428
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001429 return 0;
1430}
1431
1432static const struct i2c_device_id sgtl5000_id[] = {
1433 {"sgtl5000", 0},
1434 {},
1435};
1436
1437MODULE_DEVICE_TABLE(i2c, sgtl5000_id);
1438
Shawn Guo58e49422011-07-22 00:28:51 +08001439static const struct of_device_id sgtl5000_dt_ids[] = {
1440 { .compatible = "fsl,sgtl5000", },
1441 { /* sentinel */ }
1442};
Axel Lin4c54c6d2011-08-11 22:19:16 +08001443MODULE_DEVICE_TABLE(of, sgtl5000_dt_ids);
Shawn Guo58e49422011-07-22 00:28:51 +08001444
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001445static struct i2c_driver sgtl5000_i2c_driver = {
1446 .driver = {
1447 .name = "sgtl5000",
1448 .owner = THIS_MODULE,
Shawn Guo58e49422011-07-22 00:28:51 +08001449 .of_match_table = sgtl5000_dt_ids,
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001450 },
1451 .probe = sgtl5000_i2c_probe,
Bill Pemberton7a79e942012-12-07 09:26:37 -05001452 .remove = sgtl5000_i2c_remove,
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001453 .id_table = sgtl5000_id,
1454};
1455
Mark Brown67d45092012-04-03 22:35:18 +01001456module_i2c_driver(sgtl5000_i2c_driver);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001457
1458MODULE_DESCRIPTION("Freescale SGTL5000 ALSA SoC Codec Driver");
Zeng Zhaomingf7cb8a42012-01-16 15:18:11 +08001459MODULE_AUTHOR("Zeng Zhaoming <zengzm.kernel@gmail.com>");
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001460MODULE_LICENSE("GPL");