blob: 327b4434b4cec8e6ae0cba33186ebfce0044fb0b [file] [log] [blame]
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001/*
2 * sgtl5000.c -- SGTL5000 ALSA SoC Audio driver
3 *
4 * Copyright 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11#include <linux/module.h>
12#include <linux/moduleparam.h>
13#include <linux/init.h>
14#include <linux/delay.h>
15#include <linux/slab.h>
16#include <linux/pm.h>
17#include <linux/i2c.h>
18#include <linux/clk.h>
Fabio Estevame5d80e82013-05-04 15:39:34 -030019#include <linux/regmap.h>
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +080020#include <linux/regulator/driver.h>
21#include <linux/regulator/machine.h>
22#include <linux/regulator/consumer.h>
Shawn Guo58e49422011-07-22 00:28:51 +080023#include <linux/of_device.h>
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +080024#include <sound/core.h>
25#include <sound/tlv.h>
26#include <sound/pcm.h>
27#include <sound/pcm_params.h>
28#include <sound/soc.h>
29#include <sound/soc-dapm.h>
30#include <sound/initval.h>
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +080031
32#include "sgtl5000.h"
33
34#define SGTL5000_DAP_REG_OFFSET 0x0100
35#define SGTL5000_MAX_REG_OFFSET 0x013A
36
Wolfram Sang151798f2011-08-02 19:42:19 +020037/* default value of sgtl5000 registers */
Fabio Estevame5d80e82013-05-04 15:39:34 -030038static const struct reg_default sgtl5000_reg_defaults[] = {
39 { SGTL5000_CHIP_CLK_CTRL, 0x0008 },
40 { SGTL5000_CHIP_I2S_CTRL, 0x0010 },
41 { SGTL5000_CHIP_SSS_CTRL, 0x0008 },
42 { SGTL5000_CHIP_DAC_VOL, 0x3c3c },
43 { SGTL5000_CHIP_PAD_STRENGTH, 0x015f },
44 { SGTL5000_CHIP_ANA_HP_CTRL, 0x1818 },
45 { SGTL5000_CHIP_ANA_CTRL, 0x0111 },
46 { SGTL5000_CHIP_LINE_OUT_VOL, 0x0404 },
47 { SGTL5000_CHIP_ANA_POWER, 0x7060 },
48 { SGTL5000_CHIP_PLL_CTRL, 0x5000 },
49 { SGTL5000_DAP_BASS_ENHANCE, 0x0040 },
50 { SGTL5000_DAP_BASS_ENHANCE_CTRL, 0x051f },
51 { SGTL5000_DAP_SURROUND, 0x0040 },
52 { SGTL5000_DAP_EQ_BASS_BAND0, 0x002f },
53 { SGTL5000_DAP_EQ_BASS_BAND1, 0x002f },
54 { SGTL5000_DAP_EQ_BASS_BAND2, 0x002f },
55 { SGTL5000_DAP_EQ_BASS_BAND3, 0x002f },
56 { SGTL5000_DAP_EQ_BASS_BAND4, 0x002f },
57 { SGTL5000_DAP_MAIN_CHAN, 0x8000 },
58 { SGTL5000_DAP_AVC_CTRL, 0x0510 },
59 { SGTL5000_DAP_AVC_THRESHOLD, 0x1473 },
60 { SGTL5000_DAP_AVC_ATTACK, 0x0028 },
61 { SGTL5000_DAP_AVC_DECAY, 0x0050 },
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +080062};
63
64/* regulator supplies for sgtl5000, VDDD is an optional external supply */
65enum sgtl5000_regulator_supplies {
66 VDDA,
67 VDDIO,
68 VDDD,
69 SGTL5000_SUPPLY_NUM
70};
71
72/* vddd is optional supply */
73static const char *supply_names[SGTL5000_SUPPLY_NUM] = {
74 "VDDA",
75 "VDDIO",
76 "VDDD"
77};
78
79#define LDO_CONSUMER_NAME "VDDD_LDO"
80#define LDO_VOLTAGE 1200000
81
82static struct regulator_consumer_supply ldo_consumer[] = {
83 REGULATOR_SUPPLY(LDO_CONSUMER_NAME, NULL),
84};
85
Mark Brown61a142b2011-02-28 14:33:01 +000086static struct regulator_init_data ldo_init_data = {
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +080087 .constraints = {
Fabio Estevamcd041f62012-04-03 18:05:20 -030088 .min_uV = 1200000,
89 .max_uV = 1200000,
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +080090 .valid_modes_mask = REGULATOR_MODE_NORMAL,
91 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
92 },
93 .num_consumer_supplies = 1,
94 .consumer_supplies = &ldo_consumer[0],
95};
96
97/*
98 * sgtl5000 internal ldo regulator,
99 * enabled when VDDD not provided
100 */
101struct ldo_regulator {
102 struct regulator_desc desc;
103 struct regulator_dev *dev;
104 int voltage;
105 void *codec_data;
106 bool enabled;
107};
108
109/* sgtl5000 private structure in codec */
110struct sgtl5000_priv {
111 int sysclk; /* sysclk rate */
112 int master; /* i2s master or not */
113 int fmt; /* i2s data format */
114 struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM];
115 struct ldo_regulator *ldo;
Fabio Estevame5d80e82013-05-04 15:39:34 -0300116 struct regmap *regmap;
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800117};
118
119/*
120 * mic_bias power on/off share the same register bits with
121 * output impedance of mic bias, when power on mic bias, we
122 * need reclaim it to impedance value.
123 * 0x0 = Powered off
124 * 0x1 = 2Kohm
125 * 0x2 = 4Kohm
126 * 0x3 = 8Kohm
127 */
128static int mic_bias_event(struct snd_soc_dapm_widget *w,
129 struct snd_kcontrol *kcontrol, int event)
130{
131 switch (event) {
132 case SND_SOC_DAPM_POST_PMU:
133 /* change mic bias resistor to 4Kohm */
134 snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
Axel Lindc56c5a2011-10-19 11:00:42 +0800135 SGTL5000_BIAS_R_MASK,
136 SGTL5000_BIAS_R_4k << SGTL5000_BIAS_R_SHIFT);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800137 break;
138
139 case SND_SOC_DAPM_PRE_PMD:
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800140 snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
Axel Lindc56c5a2011-10-19 11:00:42 +0800141 SGTL5000_BIAS_R_MASK, 0);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800142 break;
143 }
144 return 0;
145}
146
147/*
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800148 * As manual described, ADC/DAC only works when VAG powerup,
149 * So enabled VAG before ADC/DAC up.
150 * In power down case, we need wait 400ms when vag fully ramped down.
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800151 */
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800152static int power_vag_event(struct snd_soc_dapm_widget *w,
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800153 struct snd_kcontrol *kcontrol, int event)
154{
155 switch (event) {
156 case SND_SOC_DAPM_PRE_PMU:
157 snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
158 SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
159 break;
160
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800161 case SND_SOC_DAPM_POST_PMD:
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800162 snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
163 SGTL5000_VAG_POWERUP, 0);
164 msleep(400);
165 break;
166 default:
167 break;
168 }
169
170 return 0;
171}
172
173/* input sources for ADC */
174static const char *adc_mux_text[] = {
175 "MIC_IN", "LINE_IN"
176};
177
178static const struct soc_enum adc_enum =
179SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 2, 2, adc_mux_text);
180
181static const struct snd_kcontrol_new adc_mux =
182SOC_DAPM_ENUM("Capture Mux", adc_enum);
183
184/* input sources for DAC */
185static const char *dac_mux_text[] = {
186 "DAC", "LINE_IN"
187};
188
189static const struct soc_enum dac_enum =
190SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 6, 2, dac_mux_text);
191
192static const struct snd_kcontrol_new dac_mux =
193SOC_DAPM_ENUM("Headphone Mux", dac_enum);
194
195static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
196 SND_SOC_DAPM_INPUT("LINE_IN"),
197 SND_SOC_DAPM_INPUT("MIC_IN"),
198
199 SND_SOC_DAPM_OUTPUT("HP_OUT"),
200 SND_SOC_DAPM_OUTPUT("LINE_OUT"),
201
Mark Brown8fc8ec92012-03-28 20:51:43 +0100202 SND_SOC_DAPM_SUPPLY("Mic Bias", SGTL5000_CHIP_MIC_CTRL, 8, 0,
203 mic_bias_event,
204 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800205
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800206 SND_SOC_DAPM_PGA("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0),
207 SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0),
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800208
209 SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
210 SND_SOC_DAPM_MUX("Headphone Mux", SND_SOC_NOPM, 0, 0, &dac_mux),
211
212 /* aif for i2s input */
213 SND_SOC_DAPM_AIF_IN("AIFIN", "Playback",
214 0, SGTL5000_CHIP_DIG_POWER,
215 0, 0),
216
217 /* aif for i2s output */
218 SND_SOC_DAPM_AIF_OUT("AIFOUT", "Capture",
219 0, SGTL5000_CHIP_DIG_POWER,
220 1, 0),
221
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800222 SND_SOC_DAPM_SUPPLY("VAG_POWER", SGTL5000_CHIP_ANA_POWER, 7, 0,
223 power_vag_event,
224 SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800225
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800226 SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800227 SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
228};
229
230/* routes for sgtl5000 */
Fabio Estevam89989632012-01-22 14:49:42 -0200231static const struct snd_soc_dapm_route sgtl5000_dapm_routes[] = {
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800232 {"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */
233 {"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */
234
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800235 {"ADC", NULL, "VAG_POWER"},
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800236 {"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */
237 {"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */
238
Zeng Zhaomingf0cdcf32012-03-30 00:13:02 +0800239 {"DAC", NULL, "VAG_POWER"},
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800240 {"DAC", NULL, "AIFIN"}, /* i2s-->dac,skip audio mux */
241 {"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */
242 {"LO", NULL, "DAC"}, /* dac --> line_out */
243
Dong Aishengeef69ac2012-07-27 19:18:42 +0800244 {"LINE_IN", NULL, "VAG_POWER"},
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800245 {"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */
246 {"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */
247
248 {"LINE_OUT", NULL, "LO"},
249 {"HP_OUT", NULL, "HP"},
250};
251
252/* custom function to fetch info of PCM playback volume */
253static int dac_info_volsw(struct snd_kcontrol *kcontrol,
254 struct snd_ctl_elem_info *uinfo)
255{
256 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
257 uinfo->count = 2;
258 uinfo->value.integer.min = 0;
259 uinfo->value.integer.max = 0xfc - 0x3c;
260 return 0;
261}
262
263/*
264 * custom function to get of PCM playback volume
265 *
266 * dac volume register
267 * 15-------------8-7--------------0
268 * | R channel vol | L channel vol |
269 * -------------------------------
270 *
271 * PCM volume with 0.5017 dB steps from 0 to -90 dB
272 *
273 * register values map to dB
274 * 0x3B and less = Reserved
275 * 0x3C = 0 dB
276 * 0x3D = -0.5 dB
277 * 0xF0 = -90 dB
278 * 0xFC and greater = Muted
279 *
280 * register value map to userspace value
281 *
282 * register value 0x3c(0dB) 0xf0(-90dB)0xfc
283 * ------------------------------
284 * userspace value 0xc0 0
285 */
286static int dac_get_volsw(struct snd_kcontrol *kcontrol,
287 struct snd_ctl_elem_value *ucontrol)
288{
289 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
290 int reg;
291 int l;
292 int r;
293
294 reg = snd_soc_read(codec, SGTL5000_CHIP_DAC_VOL);
295
296 /* get left channel volume */
297 l = (reg & SGTL5000_DAC_VOL_LEFT_MASK) >> SGTL5000_DAC_VOL_LEFT_SHIFT;
298
299 /* get right channel volume */
300 r = (reg & SGTL5000_DAC_VOL_RIGHT_MASK) >> SGTL5000_DAC_VOL_RIGHT_SHIFT;
301
302 /* make sure value fall in (0x3c,0xfc) */
303 l = clamp(l, 0x3c, 0xfc);
304 r = clamp(r, 0x3c, 0xfc);
305
306 /* invert it and map to userspace value */
307 l = 0xfc - l;
308 r = 0xfc - r;
309
310 ucontrol->value.integer.value[0] = l;
311 ucontrol->value.integer.value[1] = r;
312
313 return 0;
314}
315
316/*
317 * custom function to put of PCM playback volume
318 *
319 * dac volume register
320 * 15-------------8-7--------------0
321 * | R channel vol | L channel vol |
322 * -------------------------------
323 *
324 * PCM volume with 0.5017 dB steps from 0 to -90 dB
325 *
326 * register values map to dB
327 * 0x3B and less = Reserved
328 * 0x3C = 0 dB
329 * 0x3D = -0.5 dB
330 * 0xF0 = -90 dB
331 * 0xFC and greater = Muted
332 *
333 * userspace value map to register value
334 *
335 * userspace value 0xc0 0
336 * ------------------------------
337 * register value 0x3c(0dB) 0xf0(-90dB)0xfc
338 */
339static int dac_put_volsw(struct snd_kcontrol *kcontrol,
340 struct snd_ctl_elem_value *ucontrol)
341{
342 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
343 int reg;
344 int l;
345 int r;
346
347 l = ucontrol->value.integer.value[0];
348 r = ucontrol->value.integer.value[1];
349
350 /* make sure userspace volume fall in (0, 0xfc-0x3c) */
351 l = clamp(l, 0, 0xfc - 0x3c);
352 r = clamp(r, 0, 0xfc - 0x3c);
353
354 /* invert it, get the value can be set to register */
355 l = 0xfc - l;
356 r = 0xfc - r;
357
358 /* shift to get the register value */
359 reg = l << SGTL5000_DAC_VOL_LEFT_SHIFT |
360 r << SGTL5000_DAC_VOL_RIGHT_SHIFT;
361
362 snd_soc_write(codec, SGTL5000_CHIP_DAC_VOL, reg);
363
364 return 0;
365}
366
367static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0);
368
369/* tlv for mic gain, 0db 20db 30db 40db */
370static const unsigned int mic_gain_tlv[] = {
Clemens Ladisch740fb9d2011-11-20 15:12:26 +0100371 TLV_DB_RANGE_HEAD(2),
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800372 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
373 1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0),
374};
375
376/* tlv for hp volume, -51.5db to 12.0db, step .5db */
377static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0);
378
379static const struct snd_kcontrol_new sgtl5000_snd_controls[] = {
380 /* SOC_DOUBLE_S8_TLV with invert */
381 {
382 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
383 .name = "PCM Playback Volume",
384 .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |
385 SNDRV_CTL_ELEM_ACCESS_READWRITE,
386 .info = dac_info_volsw,
387 .get = dac_get_volsw,
388 .put = dac_put_volsw,
389 },
390
391 SOC_DOUBLE("Capture Volume", SGTL5000_CHIP_ANA_ADC_CTRL, 0, 4, 0xf, 0),
392 SOC_SINGLE_TLV("Capture Attenuate Switch (-6dB)",
393 SGTL5000_CHIP_ANA_ADC_CTRL,
394 8, 2, 0, capture_6db_attenuate),
395 SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0),
396
397 SOC_DOUBLE_TLV("Headphone Playback Volume",
398 SGTL5000_CHIP_ANA_HP_CTRL,
399 0, 8,
400 0x7f, 1,
401 headphone_volume),
402 SOC_SINGLE("Headphone Playback ZC Switch", SGTL5000_CHIP_ANA_CTRL,
403 5, 1, 0),
404
405 SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL,
Fabio Estevamb50684d2012-12-23 15:45:31 -0200406 0, 3, 0, mic_gain_tlv),
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800407};
408
409/* mute the codec used by alsa core */
410static int sgtl5000_digital_mute(struct snd_soc_dai *codec_dai, int mute)
411{
412 struct snd_soc_codec *codec = codec_dai->codec;
413 u16 adcdac_ctrl = SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT;
414
415 snd_soc_update_bits(codec, SGTL5000_CHIP_ADCDAC_CTRL,
416 adcdac_ctrl, mute ? adcdac_ctrl : 0);
417
418 return 0;
419}
420
421/* set codec format */
422static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
423{
424 struct snd_soc_codec *codec = codec_dai->codec;
425 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
426 u16 i2sctl = 0;
427
428 sgtl5000->master = 0;
429 /*
430 * i2s clock and frame master setting.
431 * ONLY support:
432 * - clock and frame slave,
433 * - clock and frame master
434 */
435 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
436 case SND_SOC_DAIFMT_CBS_CFS:
437 break;
438 case SND_SOC_DAIFMT_CBM_CFM:
439 i2sctl |= SGTL5000_I2S_MASTER;
440 sgtl5000->master = 1;
441 break;
442 default:
443 return -EINVAL;
444 }
445
446 /* setting i2s data format */
447 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
448 case SND_SOC_DAIFMT_DSP_A:
449 i2sctl |= SGTL5000_I2S_MODE_PCM;
450 break;
451 case SND_SOC_DAIFMT_DSP_B:
452 i2sctl |= SGTL5000_I2S_MODE_PCM;
453 i2sctl |= SGTL5000_I2S_LRALIGN;
454 break;
455 case SND_SOC_DAIFMT_I2S:
456 i2sctl |= SGTL5000_I2S_MODE_I2S_LJ;
457 break;
458 case SND_SOC_DAIFMT_RIGHT_J:
459 i2sctl |= SGTL5000_I2S_MODE_RJ;
460 i2sctl |= SGTL5000_I2S_LRPOL;
461 break;
462 case SND_SOC_DAIFMT_LEFT_J:
463 i2sctl |= SGTL5000_I2S_MODE_I2S_LJ;
464 i2sctl |= SGTL5000_I2S_LRALIGN;
465 break;
466 default:
467 return -EINVAL;
468 }
469
470 sgtl5000->fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
471
472 /* Clock inversion */
473 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
474 case SND_SOC_DAIFMT_NB_NF:
475 break;
476 case SND_SOC_DAIFMT_IB_NF:
477 i2sctl |= SGTL5000_I2S_SCLK_INV;
478 break;
479 default:
480 return -EINVAL;
481 }
482
483 snd_soc_write(codec, SGTL5000_CHIP_I2S_CTRL, i2sctl);
484
485 return 0;
486}
487
488/* set codec sysclk */
489static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai,
490 int clk_id, unsigned int freq, int dir)
491{
492 struct snd_soc_codec *codec = codec_dai->codec;
493 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
494
495 switch (clk_id) {
496 case SGTL5000_SYSCLK:
497 sgtl5000->sysclk = freq;
498 break;
499 default:
500 return -EINVAL;
501 }
502
503 return 0;
504}
505
506/*
507 * set clock according to i2s frame clock,
508 * sgtl5000 provide 2 clock sources.
509 * 1. sys_mclk. sample freq can only configure to
510 * 1/256, 1/384, 1/512 of sys_mclk.
511 * 2. pll. can derive any audio clocks.
512 *
513 * clock setting rules:
514 * 1. in slave mode, only sys_mclk can use.
515 * 2. as constraint by sys_mclk, sample freq should
516 * set to 32k, 44.1k and above.
517 * 3. using sys_mclk prefer to pll to save power.
518 */
519static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
520{
521 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
522 int clk_ctl = 0;
523 int sys_fs; /* sample freq */
524
525 /*
526 * sample freq should be divided by frame clock,
527 * if frame clock lower than 44.1khz, sample feq should set to
528 * 32khz or 44.1khz.
529 */
530 switch (frame_rate) {
531 case 8000:
532 case 16000:
533 sys_fs = 32000;
534 break;
535 case 11025:
536 case 22050:
537 sys_fs = 44100;
538 break;
539 default:
540 sys_fs = frame_rate;
541 break;
542 }
543
544 /* set divided factor of frame clock */
545 switch (sys_fs / frame_rate) {
546 case 4:
547 clk_ctl |= SGTL5000_RATE_MODE_DIV_4 << SGTL5000_RATE_MODE_SHIFT;
548 break;
549 case 2:
550 clk_ctl |= SGTL5000_RATE_MODE_DIV_2 << SGTL5000_RATE_MODE_SHIFT;
551 break;
552 case 1:
553 clk_ctl |= SGTL5000_RATE_MODE_DIV_1 << SGTL5000_RATE_MODE_SHIFT;
554 break;
555 default:
556 return -EINVAL;
557 }
558
559 /* set the sys_fs according to frame rate */
560 switch (sys_fs) {
561 case 32000:
562 clk_ctl |= SGTL5000_SYS_FS_32k << SGTL5000_SYS_FS_SHIFT;
563 break;
564 case 44100:
565 clk_ctl |= SGTL5000_SYS_FS_44_1k << SGTL5000_SYS_FS_SHIFT;
566 break;
567 case 48000:
568 clk_ctl |= SGTL5000_SYS_FS_48k << SGTL5000_SYS_FS_SHIFT;
569 break;
570 case 96000:
571 clk_ctl |= SGTL5000_SYS_FS_96k << SGTL5000_SYS_FS_SHIFT;
572 break;
573 default:
574 dev_err(codec->dev, "frame rate %d not supported\n",
575 frame_rate);
576 return -EINVAL;
577 }
578
579 /*
580 * calculate the divider of mclk/sample_freq,
581 * factor of freq =96k can only be 256, since mclk in range (12m,27m)
582 */
583 switch (sgtl5000->sysclk / sys_fs) {
584 case 256:
585 clk_ctl |= SGTL5000_MCLK_FREQ_256FS <<
586 SGTL5000_MCLK_FREQ_SHIFT;
587 break;
588 case 384:
589 clk_ctl |= SGTL5000_MCLK_FREQ_384FS <<
590 SGTL5000_MCLK_FREQ_SHIFT;
591 break;
592 case 512:
593 clk_ctl |= SGTL5000_MCLK_FREQ_512FS <<
594 SGTL5000_MCLK_FREQ_SHIFT;
595 break;
596 default:
597 /* if mclk not satisify the divider, use pll */
598 if (sgtl5000->master) {
599 clk_ctl |= SGTL5000_MCLK_FREQ_PLL <<
600 SGTL5000_MCLK_FREQ_SHIFT;
601 } else {
602 dev_err(codec->dev,
603 "PLL not supported in slave mode\n");
604 return -EINVAL;
605 }
606 }
607
608 /* if using pll, please check manual 6.4.2 for detail */
609 if ((clk_ctl & SGTL5000_MCLK_FREQ_MASK) == SGTL5000_MCLK_FREQ_PLL) {
610 u64 out, t;
611 int div2;
612 int pll_ctl;
613 unsigned int in, int_div, frac_div;
614
615 if (sgtl5000->sysclk > 17000000) {
616 div2 = 1;
617 in = sgtl5000->sysclk / 2;
618 } else {
619 div2 = 0;
620 in = sgtl5000->sysclk;
621 }
622 if (sys_fs == 44100)
623 out = 180633600;
624 else
625 out = 196608000;
626 t = do_div(out, in);
627 int_div = out;
628 t *= 2048;
629 do_div(t, in);
630 frac_div = t;
631 pll_ctl = int_div << SGTL5000_PLL_INT_DIV_SHIFT |
632 frac_div << SGTL5000_PLL_FRAC_DIV_SHIFT;
633
634 snd_soc_write(codec, SGTL5000_CHIP_PLL_CTRL, pll_ctl);
635 if (div2)
636 snd_soc_update_bits(codec,
637 SGTL5000_CHIP_CLK_TOP_CTRL,
638 SGTL5000_INPUT_FREQ_DIV2,
639 SGTL5000_INPUT_FREQ_DIV2);
640 else
641 snd_soc_update_bits(codec,
642 SGTL5000_CHIP_CLK_TOP_CTRL,
643 SGTL5000_INPUT_FREQ_DIV2,
644 0);
645
646 /* power up pll */
647 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
648 SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
649 SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP);
650 } else {
651 /* power down pll */
652 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
653 SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
654 0);
655 }
656
657 /* if using pll, clk_ctrl must be set after pll power up */
658 snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
659
660 return 0;
661}
662
663/*
664 * Set PCM DAI bit size and sample rate.
665 * input: params_rate, params_fmt
666 */
667static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
668 struct snd_pcm_hw_params *params,
669 struct snd_soc_dai *dai)
670{
Mark Browne6968a12012-04-04 15:58:16 +0100671 struct snd_soc_codec *codec = dai->codec;
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800672 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
673 int channels = params_channels(params);
674 int i2s_ctl = 0;
675 int stereo;
676 int ret;
677
678 /* sysclk should already set */
679 if (!sgtl5000->sysclk) {
680 dev_err(codec->dev, "%s: set sysclk first!\n", __func__);
681 return -EFAULT;
682 }
683
684 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
685 stereo = SGTL5000_DAC_STEREO;
686 else
687 stereo = SGTL5000_ADC_STEREO;
688
689 /* set mono to save power */
690 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, stereo,
691 channels == 1 ? 0 : stereo);
692
693 /* set codec clock base on lrclk */
694 ret = sgtl5000_set_clock(codec, params_rate(params));
695 if (ret)
696 return ret;
697
698 /* set i2s data format */
699 switch (params_format(params)) {
700 case SNDRV_PCM_FORMAT_S16_LE:
701 if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
702 return -EINVAL;
703 i2s_ctl |= SGTL5000_I2S_DLEN_16 << SGTL5000_I2S_DLEN_SHIFT;
704 i2s_ctl |= SGTL5000_I2S_SCLKFREQ_32FS <<
705 SGTL5000_I2S_SCLKFREQ_SHIFT;
706 break;
707 case SNDRV_PCM_FORMAT_S20_3LE:
708 i2s_ctl |= SGTL5000_I2S_DLEN_20 << SGTL5000_I2S_DLEN_SHIFT;
709 i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
710 SGTL5000_I2S_SCLKFREQ_SHIFT;
711 break;
712 case SNDRV_PCM_FORMAT_S24_LE:
713 i2s_ctl |= SGTL5000_I2S_DLEN_24 << SGTL5000_I2S_DLEN_SHIFT;
714 i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
715 SGTL5000_I2S_SCLKFREQ_SHIFT;
716 break;
717 case SNDRV_PCM_FORMAT_S32_LE:
718 if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
719 return -EINVAL;
720 i2s_ctl |= SGTL5000_I2S_DLEN_32 << SGTL5000_I2S_DLEN_SHIFT;
721 i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
722 SGTL5000_I2S_SCLKFREQ_SHIFT;
723 break;
724 default:
725 return -EINVAL;
726 }
727
Axel Lin33cb92c2011-10-21 09:54:43 +0800728 snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL,
729 SGTL5000_I2S_DLEN_MASK | SGTL5000_I2S_SCLKFREQ_MASK,
730 i2s_ctl);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800731
732 return 0;
733}
734
Mark Brown333802e2011-03-22 12:02:33 +0000735#ifdef CONFIG_REGULATOR
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800736static int ldo_regulator_is_enabled(struct regulator_dev *dev)
737{
738 struct ldo_regulator *ldo = rdev_get_drvdata(dev);
739
740 return ldo->enabled;
741}
742
743static int ldo_regulator_enable(struct regulator_dev *dev)
744{
745 struct ldo_regulator *ldo = rdev_get_drvdata(dev);
746 struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data;
747 int reg;
748
749 if (ldo_regulator_is_enabled(dev))
750 return 0;
751
752 /* set regulator value firstly */
753 reg = (1600 - ldo->voltage / 1000) / 50;
754 reg = clamp(reg, 0x0, 0xf);
755
756 /* amend the voltage value, unit: uV */
757 ldo->voltage = (1600 - reg * 50) * 1000;
758
759 /* set voltage to register */
760 snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
Axel Lin064a4bc2011-10-20 18:49:29 +0800761 SGTL5000_LINREG_VDDD_MASK, reg);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800762
763 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
764 SGTL5000_LINEREG_D_POWERUP,
765 SGTL5000_LINEREG_D_POWERUP);
766
767 /* when internal ldo enabled, simple digital power can be disabled */
768 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
769 SGTL5000_LINREG_SIMPLE_POWERUP,
770 0);
771
772 ldo->enabled = 1;
773 return 0;
774}
775
776static int ldo_regulator_disable(struct regulator_dev *dev)
777{
778 struct ldo_regulator *ldo = rdev_get_drvdata(dev);
779 struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data;
780
781 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
782 SGTL5000_LINEREG_D_POWERUP,
783 0);
784
785 /* clear voltage info */
786 snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
Axel Lin064a4bc2011-10-20 18:49:29 +0800787 SGTL5000_LINREG_VDDD_MASK, 0);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800788
789 ldo->enabled = 0;
790
791 return 0;
792}
793
794static int ldo_regulator_get_voltage(struct regulator_dev *dev)
795{
796 struct ldo_regulator *ldo = rdev_get_drvdata(dev);
797
798 return ldo->voltage;
799}
800
801static struct regulator_ops ldo_regulator_ops = {
802 .is_enabled = ldo_regulator_is_enabled,
803 .enable = ldo_regulator_enable,
804 .disable = ldo_regulator_disable,
805 .get_voltage = ldo_regulator_get_voltage,
806};
807
808static int ldo_regulator_register(struct snd_soc_codec *codec,
809 struct regulator_init_data *init_data,
810 int voltage)
811{
812 struct ldo_regulator *ldo;
Axel Lin5b13de72011-10-20 18:32:59 +0800813 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
Mark Brownc1727082012-04-04 00:50:22 +0100814 struct regulator_config config = { };
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800815
816 ldo = kzalloc(sizeof(struct ldo_regulator), GFP_KERNEL);
817
818 if (!ldo) {
819 dev_err(codec->dev, "failed to allocate ldo_regulator\n");
820 return -ENOMEM;
821 }
822
823 ldo->desc.name = kstrdup(dev_name(codec->dev), GFP_KERNEL);
824 if (!ldo->desc.name) {
825 kfree(ldo);
826 dev_err(codec->dev, "failed to allocate decs name memory\n");
827 return -ENOMEM;
828 }
829
830 ldo->desc.type = REGULATOR_VOLTAGE;
831 ldo->desc.owner = THIS_MODULE;
832 ldo->desc.ops = &ldo_regulator_ops;
833 ldo->desc.n_voltages = 1;
834
835 ldo->codec_data = codec;
836 ldo->voltage = voltage;
837
Mark Brownc1727082012-04-04 00:50:22 +0100838 config.dev = codec->dev;
839 config.driver_data = ldo;
840 config.init_data = init_data;
841
842 ldo->dev = regulator_register(&ldo->desc, &config);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800843 if (IS_ERR(ldo->dev)) {
Dan Carpenter62f75aa2011-03-08 14:39:24 +0300844 int ret = PTR_ERR(ldo->dev);
845
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800846 dev_err(codec->dev, "failed to register regulator\n");
847 kfree(ldo->desc.name);
848 kfree(ldo);
849
Dan Carpenter62f75aa2011-03-08 14:39:24 +0300850 return ret;
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800851 }
Axel Lin5b13de72011-10-20 18:32:59 +0800852 sgtl5000->ldo = ldo;
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800853
854 return 0;
855}
856
857static int ldo_regulator_remove(struct snd_soc_codec *codec)
858{
859 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
860 struct ldo_regulator *ldo = sgtl5000->ldo;
861
862 if (!ldo)
863 return 0;
864
865 regulator_unregister(ldo->dev);
866 kfree(ldo->desc.name);
867 kfree(ldo);
868
869 return 0;
870}
Mark Brown333802e2011-03-22 12:02:33 +0000871#else
872static int ldo_regulator_register(struct snd_soc_codec *codec,
873 struct regulator_init_data *init_data,
874 int voltage)
875{
Wolfram Sang09bddc82011-07-18 17:53:04 +0200876 dev_err(codec->dev, "this setup needs regulator support in the kernel\n");
Mark Brown333802e2011-03-22 12:02:33 +0000877 return -EINVAL;
878}
879
880static int ldo_regulator_remove(struct snd_soc_codec *codec)
881{
882 return 0;
883}
884#endif
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800885
886/*
887 * set dac bias
888 * common state changes:
889 * startup:
890 * off --> standby --> prepare --> on
891 * standby --> prepare --> on
892 *
893 * stop:
894 * on --> prepare --> standby
895 */
896static int sgtl5000_set_bias_level(struct snd_soc_codec *codec,
897 enum snd_soc_bias_level level)
898{
899 int ret;
900 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
901
902 switch (level) {
903 case SND_SOC_BIAS_ON:
904 case SND_SOC_BIAS_PREPARE:
905 break;
906 case SND_SOC_BIAS_STANDBY:
907 if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
908 ret = regulator_bulk_enable(
909 ARRAY_SIZE(sgtl5000->supplies),
910 sgtl5000->supplies);
911 if (ret)
912 return ret;
913 udelay(10);
914 }
915
916 break;
917 case SND_SOC_BIAS_OFF:
918 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
919 sgtl5000->supplies);
920 break;
921 }
922
923 codec->dapm.bias_level = level;
924 return 0;
925}
926
927#define SGTL5000_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
928 SNDRV_PCM_FMTBIT_S20_3LE |\
929 SNDRV_PCM_FMTBIT_S24_LE |\
930 SNDRV_PCM_FMTBIT_S32_LE)
931
Lars-Peter Clausen85e76522011-11-23 11:40:40 +0100932static const struct snd_soc_dai_ops sgtl5000_ops = {
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800933 .hw_params = sgtl5000_pcm_hw_params,
934 .digital_mute = sgtl5000_digital_mute,
935 .set_fmt = sgtl5000_set_dai_fmt,
936 .set_sysclk = sgtl5000_set_dai_sysclk,
937};
938
939static struct snd_soc_dai_driver sgtl5000_dai = {
940 .name = "sgtl5000",
941 .playback = {
942 .stream_name = "Playback",
943 .channels_min = 1,
944 .channels_max = 2,
945 /*
946 * only support 8~48K + 96K,
947 * TODO modify hw_param to support more
948 */
949 .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
950 .formats = SGTL5000_FORMATS,
951 },
952 .capture = {
953 .stream_name = "Capture",
954 .channels_min = 1,
955 .channels_max = 2,
956 .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
957 .formats = SGTL5000_FORMATS,
958 },
959 .ops = &sgtl5000_ops,
960 .symmetric_rates = 1,
961};
962
Fabio Estevame5d80e82013-05-04 15:39:34 -0300963static bool sgtl5000_volatile(struct device *dev, unsigned int reg)
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800964{
965 switch (reg) {
966 case SGTL5000_CHIP_ID:
967 case SGTL5000_CHIP_ADCDAC_CTRL:
968 case SGTL5000_CHIP_ANA_STATUS:
Fabio Estevame5d80e82013-05-04 15:39:34 -0300969 return true;
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +0800970 }
971
Fabio Estevame5d80e82013-05-04 15:39:34 -0300972 return false;
973}
974
975static bool sgtl5000_readable(struct device *dev, unsigned int reg)
976{
977 switch (reg) {
978 case SGTL5000_CHIP_ID:
979 case SGTL5000_CHIP_DIG_POWER:
980 case SGTL5000_CHIP_CLK_CTRL:
981 case SGTL5000_CHIP_I2S_CTRL:
982 case SGTL5000_CHIP_SSS_CTRL:
983 case SGTL5000_CHIP_ADCDAC_CTRL:
984 case SGTL5000_CHIP_DAC_VOL:
985 case SGTL5000_CHIP_PAD_STRENGTH:
986 case SGTL5000_CHIP_ANA_ADC_CTRL:
987 case SGTL5000_CHIP_ANA_HP_CTRL:
988 case SGTL5000_CHIP_ANA_CTRL:
989 case SGTL5000_CHIP_LINREG_CTRL:
990 case SGTL5000_CHIP_REF_CTRL:
991 case SGTL5000_CHIP_MIC_CTRL:
992 case SGTL5000_CHIP_LINE_OUT_CTRL:
993 case SGTL5000_CHIP_LINE_OUT_VOL:
994 case SGTL5000_CHIP_ANA_POWER:
995 case SGTL5000_CHIP_PLL_CTRL:
996 case SGTL5000_CHIP_CLK_TOP_CTRL:
997 case SGTL5000_CHIP_ANA_STATUS:
998 case SGTL5000_CHIP_SHORT_CTRL:
999 case SGTL5000_CHIP_ANA_TEST2:
1000 case SGTL5000_DAP_CTRL:
1001 case SGTL5000_DAP_PEQ:
1002 case SGTL5000_DAP_BASS_ENHANCE:
1003 case SGTL5000_DAP_BASS_ENHANCE_CTRL:
1004 case SGTL5000_DAP_AUDIO_EQ:
1005 case SGTL5000_DAP_SURROUND:
1006 case SGTL5000_DAP_FLT_COEF_ACCESS:
1007 case SGTL5000_DAP_COEF_WR_B0_MSB:
1008 case SGTL5000_DAP_COEF_WR_B0_LSB:
1009 case SGTL5000_DAP_EQ_BASS_BAND0:
1010 case SGTL5000_DAP_EQ_BASS_BAND1:
1011 case SGTL5000_DAP_EQ_BASS_BAND2:
1012 case SGTL5000_DAP_EQ_BASS_BAND3:
1013 case SGTL5000_DAP_EQ_BASS_BAND4:
1014 case SGTL5000_DAP_MAIN_CHAN:
1015 case SGTL5000_DAP_MIX_CHAN:
1016 case SGTL5000_DAP_AVC_CTRL:
1017 case SGTL5000_DAP_AVC_THRESHOLD:
1018 case SGTL5000_DAP_AVC_ATTACK:
1019 case SGTL5000_DAP_AVC_DECAY:
1020 case SGTL5000_DAP_COEF_WR_B1_MSB:
1021 case SGTL5000_DAP_COEF_WR_B1_LSB:
1022 case SGTL5000_DAP_COEF_WR_B2_MSB:
1023 case SGTL5000_DAP_COEF_WR_B2_LSB:
1024 case SGTL5000_DAP_COEF_WR_A1_MSB:
1025 case SGTL5000_DAP_COEF_WR_A1_LSB:
1026 case SGTL5000_DAP_COEF_WR_A2_MSB:
1027 case SGTL5000_DAP_COEF_WR_A2_LSB:
1028 return true;
1029
1030 default:
1031 return false;
1032 }
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001033}
1034
1035#ifdef CONFIG_SUSPEND
Lars-Peter Clausen84b315e2011-12-02 10:18:28 +01001036static int sgtl5000_suspend(struct snd_soc_codec *codec)
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001037{
1038 sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
1039
1040 return 0;
1041}
1042
1043/*
1044 * restore all sgtl5000 registers,
1045 * since a big hole between dap and regular registers,
1046 * we will restore them respectively.
1047 */
1048static int sgtl5000_restore_regs(struct snd_soc_codec *codec)
1049{
1050 u16 *cache = codec->reg_cache;
Wolfram Sang151798f2011-08-02 19:42:19 +02001051 u16 reg;
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001052
1053 /* restore regular registers */
Wolfram Sang151798f2011-08-02 19:42:19 +02001054 for (reg = 0; reg <= SGTL5000_CHIP_SHORT_CTRL; reg += 2) {
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001055
Zeng Zhaomingbb362e22012-01-18 13:58:07 +08001056 /* These regs should restore in particular order */
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001057 if (reg == SGTL5000_CHIP_ANA_POWER ||
1058 reg == SGTL5000_CHIP_CLK_CTRL ||
1059 reg == SGTL5000_CHIP_LINREG_CTRL ||
1060 reg == SGTL5000_CHIP_LINE_OUT_CTRL ||
Zeng Zhaomingbb362e22012-01-18 13:58:07 +08001061 reg == SGTL5000_CHIP_REF_CTRL)
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001062 continue;
1063
Wolfram Sang151798f2011-08-02 19:42:19 +02001064 snd_soc_write(codec, reg, cache[reg]);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001065 }
1066
1067 /* restore dap registers */
Wolfram Sang151798f2011-08-02 19:42:19 +02001068 for (reg = SGTL5000_DAP_REG_OFFSET; reg < SGTL5000_MAX_REG_OFFSET; reg += 2)
1069 snd_soc_write(codec, reg, cache[reg]);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001070
1071 /*
Zeng Zhaomingbb362e22012-01-18 13:58:07 +08001072 * restore these regs according to the power setting sequence in
1073 * sgtl5000_set_power_regs() and clock setting sequence in
1074 * sgtl5000_set_clock().
1075 *
1076 * The order of restore is:
1077 * 1. SGTL5000_CHIP_CLK_CTRL MCLK_FREQ bits (1:0) should be restore after
1078 * SGTL5000_CHIP_ANA_POWER PLL bits set
1079 * 2. SGTL5000_CHIP_LINREG_CTRL should be set before
1080 * SGTL5000_CHIP_ANA_POWER LINREG_D restored
1081 * 3. SGTL5000_CHIP_REF_CTRL controls Analog Ground Voltage,
1082 * prefer to resotre it after SGTL5000_CHIP_ANA_POWER restored
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001083 */
1084 snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL,
Wolfram Sang151798f2011-08-02 19:42:19 +02001085 cache[SGTL5000_CHIP_LINREG_CTRL]);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001086
1087 snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER,
Wolfram Sang151798f2011-08-02 19:42:19 +02001088 cache[SGTL5000_CHIP_ANA_POWER]);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001089
1090 snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL,
Wolfram Sang151798f2011-08-02 19:42:19 +02001091 cache[SGTL5000_CHIP_CLK_CTRL]);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001092
1093 snd_soc_write(codec, SGTL5000_CHIP_REF_CTRL,
Wolfram Sang151798f2011-08-02 19:42:19 +02001094 cache[SGTL5000_CHIP_REF_CTRL]);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001095
1096 snd_soc_write(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
Wolfram Sang151798f2011-08-02 19:42:19 +02001097 cache[SGTL5000_CHIP_LINE_OUT_CTRL]);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001098 return 0;
1099}
1100
1101static int sgtl5000_resume(struct snd_soc_codec *codec)
1102{
1103 /* Bring the codec back up to standby to enable regulators */
1104 sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1105
1106 /* Restore registers by cached in memory */
1107 sgtl5000_restore_regs(codec);
1108 return 0;
1109}
1110#else
1111#define sgtl5000_suspend NULL
1112#define sgtl5000_resume NULL
1113#endif /* CONFIG_SUSPEND */
1114
1115/*
1116 * sgtl5000 has 3 internal power supplies:
1117 * 1. VAG, normally set to vdda/2
1118 * 2. chargepump, set to different value
1119 * according to voltage of vdda and vddio
1120 * 3. line out VAG, normally set to vddio/2
1121 *
1122 * and should be set according to:
1123 * 1. vddd provided by external or not
1124 * 2. vdda and vddio voltage value. > 3.1v or not
1125 * 3. chip revision >=0x11 or not. If >=0x11, not use external vddd.
1126 */
1127static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
1128{
1129 int vddd;
1130 int vdda;
1131 int vddio;
1132 u16 ana_pwr;
1133 u16 lreg_ctrl;
1134 int vag;
1135 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1136
1137 vdda = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer);
1138 vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO].consumer);
1139 vddd = regulator_get_voltage(sgtl5000->supplies[VDDD].consumer);
1140
1141 vdda = vdda / 1000;
1142 vddio = vddio / 1000;
1143 vddd = vddd / 1000;
1144
1145 if (vdda <= 0 || vddio <= 0 || vddd < 0) {
1146 dev_err(codec->dev, "regulator voltage not set correctly\n");
1147
1148 return -EINVAL;
1149 }
1150
1151 /* according to datasheet, maximum voltage of supplies */
1152 if (vdda > 3600 || vddio > 3600 || vddd > 1980) {
1153 dev_err(codec->dev,
Fabio Estevamcf1ee982011-12-28 09:55:15 -02001154 "exceed max voltage vdda %dmV vddio %dmV vddd %dmV\n",
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001155 vdda, vddio, vddd);
1156
1157 return -EINVAL;
1158 }
1159
1160 /* reset value */
1161 ana_pwr = snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER);
1162 ana_pwr |= SGTL5000_DAC_STEREO |
1163 SGTL5000_ADC_STEREO |
1164 SGTL5000_REFTOP_POWERUP;
1165 lreg_ctrl = snd_soc_read(codec, SGTL5000_CHIP_LINREG_CTRL);
1166
1167 if (vddio < 3100 && vdda < 3100) {
1168 /* enable internal oscillator used for charge pump */
1169 snd_soc_update_bits(codec, SGTL5000_CHIP_CLK_TOP_CTRL,
1170 SGTL5000_INT_OSC_EN,
1171 SGTL5000_INT_OSC_EN);
1172 /* Enable VDDC charge pump */
1173 ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
1174 } else if (vddio >= 3100 && vdda >= 3100) {
1175 /*
1176 * if vddio and vddd > 3.1v,
1177 * charge pump should be clean before set ana_pwr
1178 */
1179 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
1180 SGTL5000_VDDC_CHRGPMP_POWERUP, 0);
1181
1182 /* VDDC use VDDIO rail */
1183 lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
1184 lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
1185 SGTL5000_VDDC_MAN_ASSN_SHIFT;
1186 }
1187
1188 snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
1189
1190 snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, ana_pwr);
1191
1192 /* set voltage to register */
1193 snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
Axel Lin064a4bc2011-10-20 18:49:29 +08001194 SGTL5000_LINREG_VDDD_MASK, 0x8);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001195
1196 /*
1197 * if vddd linear reg has been enabled,
1198 * simple digital supply should be clear to get
1199 * proper VDDD voltage.
1200 */
1201 if (ana_pwr & SGTL5000_LINEREG_D_POWERUP)
1202 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
1203 SGTL5000_LINREG_SIMPLE_POWERUP,
1204 0);
1205 else
1206 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
1207 SGTL5000_LINREG_SIMPLE_POWERUP |
1208 SGTL5000_STARTUP_POWERUP,
1209 0);
1210
1211 /*
1212 * set ADC/DAC VAG to vdda / 2,
1213 * should stay in range (0.8v, 1.575v)
1214 */
1215 vag = vdda / 2;
1216 if (vag <= SGTL5000_ANA_GND_BASE)
1217 vag = 0;
1218 else if (vag >= SGTL5000_ANA_GND_BASE + SGTL5000_ANA_GND_STP *
1219 (SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT))
1220 vag = SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT;
1221 else
1222 vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP;
1223
1224 snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
Axel Lin33cb92c2011-10-21 09:54:43 +08001225 SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001226
1227 /* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */
1228 vag = vddio / 2;
1229 if (vag <= SGTL5000_LINE_OUT_GND_BASE)
1230 vag = 0;
1231 else if (vag >= SGTL5000_LINE_OUT_GND_BASE +
1232 SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX)
1233 vag = SGTL5000_LINE_OUT_GND_MAX;
1234 else
1235 vag = (vag - SGTL5000_LINE_OUT_GND_BASE) /
1236 SGTL5000_LINE_OUT_GND_STP;
1237
1238 snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
Axel Lin33cb92c2011-10-21 09:54:43 +08001239 SGTL5000_LINE_OUT_CURRENT_MASK |
1240 SGTL5000_LINE_OUT_GND_MASK,
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001241 vag << SGTL5000_LINE_OUT_GND_SHIFT |
1242 SGTL5000_LINE_OUT_CURRENT_360u <<
1243 SGTL5000_LINE_OUT_CURRENT_SHIFT);
1244
1245 return 0;
1246}
1247
Wolfram Sange94a4062011-07-18 17:53:03 +02001248static int sgtl5000_replace_vddd_with_ldo(struct snd_soc_codec *codec)
1249{
1250 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1251 int ret;
1252
1253 /* set internal ldo to 1.2v */
1254 ret = ldo_regulator_register(codec, &ldo_init_data, LDO_VOLTAGE);
1255 if (ret) {
1256 dev_err(codec->dev,
1257 "Failed to register vddd internal supplies: %d\n", ret);
1258 return ret;
1259 }
1260
1261 sgtl5000->supplies[VDDD].supply = LDO_CONSUMER_NAME;
1262
1263 ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sgtl5000->supplies),
1264 sgtl5000->supplies);
1265
1266 if (ret) {
1267 ldo_regulator_remove(codec);
1268 dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
1269 return ret;
1270 }
1271
1272 dev_info(codec->dev, "Using internal LDO instead of VDDD\n");
1273 return 0;
1274}
1275
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001276static int sgtl5000_enable_regulators(struct snd_soc_codec *codec)
1277{
1278 u16 reg;
1279 int ret;
1280 int rev;
1281 int i;
1282 int external_vddd = 0;
1283 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1284
1285 for (i = 0; i < ARRAY_SIZE(sgtl5000->supplies); i++)
1286 sgtl5000->supplies[i].supply = supply_names[i];
1287
1288 ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sgtl5000->supplies),
1289 sgtl5000->supplies);
1290 if (!ret)
1291 external_vddd = 1;
1292 else {
Wolfram Sange94a4062011-07-18 17:53:03 +02001293 ret = sgtl5000_replace_vddd_with_ldo(codec);
1294 if (ret)
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001295 return ret;
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001296 }
1297
1298 ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies),
1299 sgtl5000->supplies);
1300 if (ret)
1301 goto err_regulator_free;
1302
1303 /* wait for all power rails bring up */
1304 udelay(10);
1305
1306 /* read chip information */
1307 reg = snd_soc_read(codec, SGTL5000_CHIP_ID);
1308 if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) !=
1309 SGTL5000_PARTID_PART_ID) {
1310 dev_err(codec->dev,
1311 "Device with ID register %x is not a sgtl5000\n", reg);
1312 ret = -ENODEV;
1313 goto err_regulator_disable;
1314 }
1315
1316 rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT;
Fabio Estevamf2c6e752012-01-16 17:32:21 -02001317 dev_info(codec->dev, "sgtl5000 revision 0x%x\n", rev);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001318
1319 /*
1320 * workaround for revision 0x11 and later,
1321 * roll back to use internal LDO
1322 */
1323 if (external_vddd && rev >= 0x11) {
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001324 /* disable all regulator first */
1325 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
1326 sgtl5000->supplies);
1327 /* free VDDD regulator */
1328 regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
1329 sgtl5000->supplies);
1330
Wolfram Sange94a4062011-07-18 17:53:03 +02001331 ret = sgtl5000_replace_vddd_with_ldo(codec);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001332 if (ret)
1333 return ret;
1334
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001335 ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies),
1336 sgtl5000->supplies);
1337 if (ret)
1338 goto err_regulator_free;
1339
1340 /* wait for all power rails bring up */
1341 udelay(10);
1342 }
1343
1344 return 0;
1345
1346err_regulator_disable:
1347 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
1348 sgtl5000->supplies);
1349err_regulator_free:
1350 regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
1351 sgtl5000->supplies);
1352 if (external_vddd)
1353 ldo_regulator_remove(codec);
1354 return ret;
1355
1356}
1357
1358static int sgtl5000_probe(struct snd_soc_codec *codec)
1359{
1360 int ret;
1361 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1362
1363 /* setup i2c data ops */
Fabio Estevame5d80e82013-05-04 15:39:34 -03001364 codec->control_data = sgtl5000->regmap;
1365 ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_REGMAP);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001366 if (ret < 0) {
1367 dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
1368 return ret;
1369 }
1370
1371 ret = sgtl5000_enable_regulators(codec);
1372 if (ret)
1373 return ret;
1374
1375 /* power up sgtl5000 */
1376 ret = sgtl5000_set_power_regs(codec);
1377 if (ret)
1378 goto err;
1379
1380 /* enable small pop, introduce 400ms delay in turning off */
1381 snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
1382 SGTL5000_SMALL_POP,
1383 SGTL5000_SMALL_POP);
1384
1385 /* disable short cut detector */
1386 snd_soc_write(codec, SGTL5000_CHIP_SHORT_CTRL, 0);
1387
1388 /*
1389 * set i2s as default input of sound switch
1390 * TODO: add sound switch to control and dapm widge.
1391 */
1392 snd_soc_write(codec, SGTL5000_CHIP_SSS_CTRL,
1393 SGTL5000_DAC_SEL_I2S_IN << SGTL5000_DAC_SEL_SHIFT);
1394 snd_soc_write(codec, SGTL5000_CHIP_DIG_POWER,
1395 SGTL5000_ADC_EN | SGTL5000_DAC_EN);
1396
1397 /* enable dac volume ramp by default */
1398 snd_soc_write(codec, SGTL5000_CHIP_ADCDAC_CTRL,
1399 SGTL5000_DAC_VOL_RAMP_EN |
1400 SGTL5000_DAC_MUTE_RIGHT |
1401 SGTL5000_DAC_MUTE_LEFT);
1402
1403 snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, 0x015f);
1404
1405 snd_soc_write(codec, SGTL5000_CHIP_ANA_CTRL,
1406 SGTL5000_HP_ZCD_EN |
1407 SGTL5000_ADC_ZCD_EN);
1408
Fabio Estevamb50684d2012-12-23 15:45:31 -02001409 snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 2);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001410
1411 /*
1412 * disable DAP
1413 * TODO:
1414 * Enable DAP in kcontrol and dapm.
1415 */
1416 snd_soc_write(codec, SGTL5000_DAP_CTRL, 0);
1417
1418 /* leading to standby state */
1419 ret = sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1420 if (ret)
1421 goto err;
1422
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001423 return 0;
1424
1425err:
1426 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
1427 sgtl5000->supplies);
1428 regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
1429 sgtl5000->supplies);
1430 ldo_regulator_remove(codec);
1431
1432 return ret;
1433}
1434
1435static int sgtl5000_remove(struct snd_soc_codec *codec)
1436{
1437 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1438
1439 sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
1440
1441 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
1442 sgtl5000->supplies);
1443 regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
1444 sgtl5000->supplies);
1445 ldo_regulator_remove(codec);
1446
1447 return 0;
1448}
1449
Mark Brown61a142b2011-02-28 14:33:01 +00001450static struct snd_soc_codec_driver sgtl5000_driver = {
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001451 .probe = sgtl5000_probe,
1452 .remove = sgtl5000_remove,
1453 .suspend = sgtl5000_suspend,
1454 .resume = sgtl5000_resume,
1455 .set_bias_level = sgtl5000_set_bias_level,
Fabio Estevam89989632012-01-22 14:49:42 -02001456 .controls = sgtl5000_snd_controls,
1457 .num_controls = ARRAY_SIZE(sgtl5000_snd_controls),
Mark Brown5e0ac522012-01-23 10:16:31 +00001458 .dapm_widgets = sgtl5000_dapm_widgets,
1459 .num_dapm_widgets = ARRAY_SIZE(sgtl5000_dapm_widgets),
1460 .dapm_routes = sgtl5000_dapm_routes,
1461 .num_dapm_routes = ARRAY_SIZE(sgtl5000_dapm_routes),
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001462};
1463
Fabio Estevame5d80e82013-05-04 15:39:34 -03001464static const struct regmap_config sgtl5000_regmap = {
1465 .reg_bits = 16,
1466 .val_bits = 16,
1467
1468 .max_register = SGTL5000_MAX_REG_OFFSET,
1469 .volatile_reg = sgtl5000_volatile,
1470 .readable_reg = sgtl5000_readable,
1471
1472 .cache_type = REGCACHE_RBTREE,
1473 .reg_defaults = sgtl5000_reg_defaults,
1474 .num_reg_defaults = ARRAY_SIZE(sgtl5000_reg_defaults),
1475};
1476
Bill Pemberton7a79e942012-12-07 09:26:37 -05001477static int sgtl5000_i2c_probe(struct i2c_client *client,
1478 const struct i2c_device_id *id)
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001479{
1480 struct sgtl5000_priv *sgtl5000;
1481 int ret;
1482
Fabio Estevam512fa7c2011-12-28 11:30:11 -02001483 sgtl5000 = devm_kzalloc(&client->dev, sizeof(struct sgtl5000_priv),
1484 GFP_KERNEL);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001485 if (!sgtl5000)
1486 return -ENOMEM;
1487
Fabio Estevame5d80e82013-05-04 15:39:34 -03001488 sgtl5000->regmap = devm_regmap_init_i2c(client, &sgtl5000_regmap);
1489 if (IS_ERR(sgtl5000->regmap)) {
1490 ret = PTR_ERR(sgtl5000->regmap);
1491 dev_err(&client->dev, "Failed to allocate regmap: %d\n", ret);
1492 return ret;
1493 }
1494
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001495 i2c_set_clientdata(client, sgtl5000);
1496
1497 ret = snd_soc_register_codec(&client->dev,
1498 &sgtl5000_driver, &sgtl5000_dai, 1);
Fabio Estevam512fa7c2011-12-28 11:30:11 -02001499 return ret;
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001500}
1501
Bill Pemberton7a79e942012-12-07 09:26:37 -05001502static int sgtl5000_i2c_remove(struct i2c_client *client)
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001503{
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001504 snd_soc_unregister_codec(&client->dev);
1505
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001506 return 0;
1507}
1508
1509static const struct i2c_device_id sgtl5000_id[] = {
1510 {"sgtl5000", 0},
1511 {},
1512};
1513
1514MODULE_DEVICE_TABLE(i2c, sgtl5000_id);
1515
Shawn Guo58e49422011-07-22 00:28:51 +08001516static const struct of_device_id sgtl5000_dt_ids[] = {
1517 { .compatible = "fsl,sgtl5000", },
1518 { /* sentinel */ }
1519};
Axel Lin4c54c6d2011-08-11 22:19:16 +08001520MODULE_DEVICE_TABLE(of, sgtl5000_dt_ids);
Shawn Guo58e49422011-07-22 00:28:51 +08001521
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001522static struct i2c_driver sgtl5000_i2c_driver = {
1523 .driver = {
1524 .name = "sgtl5000",
1525 .owner = THIS_MODULE,
Shawn Guo58e49422011-07-22 00:28:51 +08001526 .of_match_table = sgtl5000_dt_ids,
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001527 },
1528 .probe = sgtl5000_i2c_probe,
Bill Pemberton7a79e942012-12-07 09:26:37 -05001529 .remove = sgtl5000_i2c_remove,
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001530 .id_table = sgtl5000_id,
1531};
1532
Mark Brown67d45092012-04-03 22:35:18 +01001533module_i2c_driver(sgtl5000_i2c_driver);
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001534
1535MODULE_DESCRIPTION("Freescale SGTL5000 ALSA SoC Codec Driver");
Zeng Zhaomingf7cb8a42012-01-16 15:18:11 +08001536MODULE_AUTHOR("Zeng Zhaoming <zengzm.kernel@gmail.com>");
Zeng Zhaoming9b34e6c2011-02-24 02:08:21 +08001537MODULE_LICENSE("GPL");