blob: d1b63387e9bcf2b0e58aa32cee04859ea46defa0 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002** hp100.c
Linus Torvalds1da177e2005-04-16 15:20:36 -07003** HP CASCADE Architecture Driver for 100VG-AnyLan Network Adapters
4**
5** $Id: hp100.c,v 1.58 2001/09/24 18:03:01 perex Exp perex $
6**
7** Based on the HP100 driver written by Jaroslav Kysela <perex@jcu.cz>
Jeff Garzik6aa20a22006-09-13 13:24:59 -04008** Extended for new busmaster capable chipsets by
Linus Torvalds1da177e2005-04-16 15:20:36 -07009** Siegfried "Frieder" Loeffler (dg1sek) <floeff@mathematik.uni-stuttgart.de>
10**
Jaroslav Kyselac1017a42007-10-15 09:50:19 +020011** Maintained by: Jaroslav Kysela <perex@perex.cz>
Jeff Garzik6aa20a22006-09-13 13:24:59 -040012**
Linus Torvalds1da177e2005-04-16 15:20:36 -070013** This driver has only been tested with
14** -- HP J2585B 10/100 Mbit/s PCI Busmaster
Jeff Garzik6aa20a22006-09-13 13:24:59 -040015** -- HP J2585A 10/100 Mbit/s PCI
Pavel Machek31df7b72005-05-01 08:58:52 -070016** -- HP J2970A 10 Mbit/s PCI Combo 10base-T/BNC
17** -- HP J2973A 10 Mbit/s PCI 10base-T
Linus Torvalds1da177e2005-04-16 15:20:36 -070018** -- HP J2573 10/100 ISA
19** -- Compex ReadyLink ENET100-VG4 10/100 Mbit/s PCI / EISA
20** -- Compex FreedomLine 100/VG 10/100 Mbit/s ISA / EISA / PCI
Jeff Garzik6aa20a22006-09-13 13:24:59 -040021**
Linus Torvalds1da177e2005-04-16 15:20:36 -070022** but it should also work with the other CASCADE based adapters.
23**
24** TODO:
25** - J2573 seems to hang sometimes when in shared memory mode.
26** - Mode for Priority TX
27** - Check PCI registers, performance might be improved?
28** - To reduce interrupt load in busmaster, one could switch off
29** the interrupts that are used to refill the queues whenever the
30** queues are filled up to more than a certain threshold.
31** - some updates for EISA version of card
32**
33**
34** This code is free software; you can redistribute it and/or modify
35** it under the terms of the GNU General Public License as published by
36** the Free Software Foundation; either version 2 of the License, or
37** (at your option) any later version.
38**
39** This code is distributed in the hope that it will be useful,
40** but WITHOUT ANY WARRANTY; without even the implied warranty of
41** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
42** GNU General Public License for more details.
43**
44** You should have received a copy of the GNU General Public License
45** along with this program; if not, write to the Free Software
46** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
47**
48** 1.57c -> 1.58
49** - used indent to change coding-style
50** - added KTI DP-200 EISA ID
51** - ioremap is also used for low (<1MB) memory (multi-architecture support)
52**
53** 1.57b -> 1.57c - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
54** - release resources on failure in init_module
55**
56** 1.57 -> 1.57b - Jean II
57** - fix spinlocks, SMP is now working !
58**
59** 1.56 -> 1.57
60** - updates for new PCI interface for 2.1 kernels
61**
62** 1.55 -> 1.56
63** - removed printk in misc. interrupt and update statistics to allow
64** monitoring of card status
65** - timing changes in xmit routines, relogin to 100VG hub added when
66** driver does reset
67** - included fix for Compex FreedomLine PCI adapter
Jeff Garzik6aa20a22006-09-13 13:24:59 -040068**
Linus Torvalds1da177e2005-04-16 15:20:36 -070069** 1.54 -> 1.55
70** - fixed bad initialization in init_module
71** - added Compex FreedomLine adapter
72** - some fixes in card initialization
73**
74** 1.53 -> 1.54
75** - added hardware multicast filter support (doesn't work)
Jeff Garzik6aa20a22006-09-13 13:24:59 -040076** - little changes in hp100_sense_lan routine
Linus Torvalds1da177e2005-04-16 15:20:36 -070077** - added support for Coax and AUI (J2970)
78** - fix for multiple cards and hp100_mode parameter (insmod)
Jeff Garzik6aa20a22006-09-13 13:24:59 -040079** - fix for shared IRQ
Linus Torvalds1da177e2005-04-16 15:20:36 -070080**
81** 1.52 -> 1.53
82** - fixed bug in multicast support
83**
84*/
85
86#define HP100_DEFAULT_PRIORITY_TX 0
87
88#undef HP100_DEBUG
89#undef HP100_DEBUG_B /* Trace */
90#undef HP100_DEBUG_BM /* Debug busmaster code (PDL stuff) */
91
92#undef HP100_DEBUG_TRAINING /* Debug login-to-hub procedure */
93#undef HP100_DEBUG_TX
94#undef HP100_DEBUG_IRQ
95#undef HP100_DEBUG_RX
96
97#undef HP100_MULTICAST_FILTER /* Need to be debugged... */
98
Linus Torvalds1da177e2005-04-16 15:20:36 -070099#include <linux/module.h>
100#include <linux/kernel.h>
101#include <linux/string.h>
102#include <linux/errno.h>
103#include <linux/ioport.h>
104#include <linux/slab.h>
105#include <linux/interrupt.h>
106#include <linux/eisa.h>
107#include <linux/pci.h>
Domen Puncer1e7f0bd2005-06-26 18:22:14 -0400108#include <linux/dma-mapping.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109#include <linux/spinlock.h>
110#include <linux/netdevice.h>
111#include <linux/etherdevice.h>
112#include <linux/skbuff.h>
113#include <linux/types.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700114#include <linux/delay.h>
115#include <linux/init.h>
116#include <linux/bitops.h>
Marcelo Feitoza Parisiff5688a2006-01-09 18:37:15 -0800117#include <linux/jiffies.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700118
119#include <asm/io.h>
120
121#include "hp100.h"
122
123/*
124 * defines
125 */
126
127#define HP100_BUS_ISA 0
128#define HP100_BUS_EISA 1
129#define HP100_BUS_PCI 2
130
131#define HP100_REGION_SIZE 0x20 /* for ioports */
132#define HP100_SIG_LEN 8 /* same as EISA_SIG_LEN */
133
134#define HP100_MAX_PACKET_SIZE (1536+4)
135#define HP100_MIN_PACKET_SIZE 60
136
137#ifndef HP100_DEFAULT_RX_RATIO
138/* default - 75% onboard memory on the card are used for RX packets */
139#define HP100_DEFAULT_RX_RATIO 75
140#endif
141
142#ifndef HP100_DEFAULT_PRIORITY_TX
143/* default - don't enable transmit outgoing packets as priority */
144#define HP100_DEFAULT_PRIORITY_TX 0
145#endif
146
147/*
148 * structures
149 */
150
151struct hp100_private {
152 spinlock_t lock;
153 char id[HP100_SIG_LEN];
154 u_short chip;
155 u_short soft_model;
156 u_int memory_size;
157 u_int virt_memory_size;
158 u_short rx_ratio; /* 1 - 99 */
159 u_short priority_tx; /* != 0 - priority tx */
160 u_short mode; /* PIO, Shared Mem or Busmaster */
161 u_char bus;
162 struct pci_dev *pci_dev;
163 short mem_mapped; /* memory mapped access */
164 void __iomem *mem_ptr_virt; /* virtual memory mapped area, maybe NULL */
165 unsigned long mem_ptr_phys; /* physical memory mapped area */
166 short lan_type; /* 10Mb/s, 100Mb/s or -1 (error) */
167 int hub_status; /* was login to hub successful? */
168 u_char mac1_mode;
169 u_char mac2_mode;
170 u_char hash_bytes[8];
171 struct net_device_stats stats;
172
173 /* Rings for busmaster mode: */
174 hp100_ring_t *rxrhead; /* Head (oldest) index into rxring */
175 hp100_ring_t *rxrtail; /* Tail (newest) index into rxring */
176 hp100_ring_t *txrhead; /* Head (oldest) index into txring */
177 hp100_ring_t *txrtail; /* Tail (newest) index into txring */
178
179 hp100_ring_t rxring[MAX_RX_PDL];
180 hp100_ring_t txring[MAX_TX_PDL];
181
182 u_int *page_vaddr_algn; /* Aligned virtual address of allocated page */
183 u_long whatever_offset; /* Offset to bus/phys/dma address */
184 int rxrcommit; /* # Rx PDLs commited to adapter */
185 int txrcommit; /* # Tx PDLs commited to adapter */
186};
187
188/*
189 * variables
190 */
Jeff Garzik7525d4b2006-10-02 21:08:22 -0400191#ifdef CONFIG_ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700192static const char *hp100_isa_tbl[] = {
193 "HWPF150", /* HP J2573 rev A */
194 "HWP1950", /* HP J2573 */
195};
Jeff Garzik2c81fbc2006-10-01 07:32:20 -0400196#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700197
198#ifdef CONFIG_EISA
199static struct eisa_device_id hp100_eisa_tbl[] = {
200 { "HWPF180" }, /* HP J2577 rev A */
201 { "HWP1920" }, /* HP 27248B */
202 { "HWP1940" }, /* HP J2577 */
203 { "HWP1990" }, /* HP J2577 */
204 { "CPX0301" }, /* ReadyLink ENET100-VG4 */
205 { "CPX0401" }, /* FreedomLine 100/VG */
206 { "" } /* Mandatory final entry ! */
207};
208MODULE_DEVICE_TABLE(eisa, hp100_eisa_tbl);
209#endif
210
211#ifdef CONFIG_PCI
212static struct pci_device_id hp100_pci_tbl[] = {
213 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2585A, PCI_ANY_ID, PCI_ANY_ID,},
214 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2585B, PCI_ANY_ID, PCI_ANY_ID,},
215 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2970A, PCI_ANY_ID, PCI_ANY_ID,},
216 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2973A, PCI_ANY_ID, PCI_ANY_ID,},
217 {PCI_VENDOR_ID_COMPEX, PCI_DEVICE_ID_COMPEX_ENET100VG4, PCI_ANY_ID, PCI_ANY_ID,},
218 {PCI_VENDOR_ID_COMPEX2, PCI_DEVICE_ID_COMPEX2_100VG, PCI_ANY_ID, PCI_ANY_ID,},
219/* {PCI_VENDOR_ID_KTI, PCI_DEVICE_ID_KTI_DP200, PCI_ANY_ID, PCI_ANY_ID }, */
220 {} /* Terminating entry */
221};
222MODULE_DEVICE_TABLE(pci, hp100_pci_tbl);
223#endif
224
225static int hp100_rx_ratio = HP100_DEFAULT_RX_RATIO;
226static int hp100_priority_tx = HP100_DEFAULT_PRIORITY_TX;
227static int hp100_mode = 1;
228
229module_param(hp100_rx_ratio, int, 0);
230module_param(hp100_priority_tx, int, 0);
231module_param(hp100_mode, int, 0);
232
233/*
234 * prototypes
235 */
236
237static int hp100_probe1(struct net_device *dev, int ioaddr, u_char bus,
238 struct pci_dev *pci_dev);
239
240
241static int hp100_open(struct net_device *dev);
242static int hp100_close(struct net_device *dev);
243static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev);
244static int hp100_start_xmit_bm(struct sk_buff *skb,
245 struct net_device *dev);
246static void hp100_rx(struct net_device *dev);
247static struct net_device_stats *hp100_get_stats(struct net_device *dev);
248static void hp100_misc_interrupt(struct net_device *dev);
249static void hp100_update_stats(struct net_device *dev);
250static void hp100_clear_stats(struct hp100_private *lp, int ioaddr);
251static void hp100_set_multicast_list(struct net_device *dev);
David Howells7d12e782006-10-05 14:55:46 +0100252static irqreturn_t hp100_interrupt(int irq, void *dev_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700253static void hp100_start_interface(struct net_device *dev);
254static void hp100_stop_interface(struct net_device *dev);
255static void hp100_load_eeprom(struct net_device *dev, u_short ioaddr);
256static int hp100_sense_lan(struct net_device *dev);
257static int hp100_login_to_vg_hub(struct net_device *dev,
258 u_short force_relogin);
259static int hp100_down_vg_link(struct net_device *dev);
260static void hp100_cascade_reset(struct net_device *dev, u_short enable);
261static void hp100_BM_shutdown(struct net_device *dev);
262static void hp100_mmuinit(struct net_device *dev);
263static void hp100_init_pdls(struct net_device *dev);
264static int hp100_init_rxpdl(struct net_device *dev,
265 register hp100_ring_t * ringptr,
266 register u_int * pdlptr);
267static int hp100_init_txpdl(struct net_device *dev,
268 register hp100_ring_t * ringptr,
269 register u_int * pdlptr);
270static void hp100_rxfill(struct net_device *dev);
271static void hp100_hwinit(struct net_device *dev);
272static void hp100_clean_txring(struct net_device *dev);
273#ifdef HP100_DEBUG
274static void hp100_RegisterDump(struct net_device *dev);
275#endif
276
277/* Conversion to new PCI API :
278 * Convert an address in a kernel buffer to a bus/phys/dma address.
279 * This work *only* for memory fragments part of lp->page_vaddr,
280 * because it was properly DMA allocated via pci_alloc_consistent(),
Adrian Bunk943ffb52006-01-10 00:10:13 +0100281 * so we just need to "retrieve" the original mapping to bus/phys/dma
Linus Torvalds1da177e2005-04-16 15:20:36 -0700282 * address - Jean II */
283static inline dma_addr_t virt_to_whatever(struct net_device *dev, u32 * ptr)
284{
285 struct hp100_private *lp = netdev_priv(dev);
286 return ((u_long) ptr) + lp->whatever_offset;
287}
288
289static inline u_int pdl_map_data(struct hp100_private *lp, void *data)
290{
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400291 return pci_map_single(lp->pci_dev, data,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700292 MAX_ETHER_SIZE, PCI_DMA_FROMDEVICE);
293}
294
295/* TODO: This function should not really be needed in a good design... */
296static void wait(void)
297{
298 mdelay(1);
299}
300
301/*
302 * probe functions
303 * These functions should - if possible - avoid doing write operations
304 * since this could cause problems when the card is not installed.
305 */
306
307/*
308 * Read board id and convert to string.
309 * Effectively same code as decode_eisa_sig
310 */
311static __devinit const char *hp100_read_id(int ioaddr)
312{
313 int i;
314 static char str[HP100_SIG_LEN];
315 unsigned char sig[4], sum;
316 unsigned short rev;
317
318 hp100_page(ID_MAC_ADDR);
319 sum = 0;
320 for (i = 0; i < 4; i++) {
321 sig[i] = hp100_inb(BOARD_ID + i);
322 sum += sig[i];
323 }
324
325 sum += hp100_inb(BOARD_ID + i);
326 if (sum != 0xff)
327 return NULL; /* bad checksum */
328
329 str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
330 str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
331 str[2] = (sig[1] & 0x1f) + ('A' - 1);
332 rev = (sig[2] << 8) | sig[3];
333 sprintf(str + 3, "%04X", rev);
334
335 return str;
336}
337
Jeff Garzik7525d4b2006-10-02 21:08:22 -0400338#ifdef CONFIG_ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700339static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr)
340{
341 const char *sig;
342 int i;
343
344 if (!request_region(ioaddr, HP100_REGION_SIZE, "hp100"))
345 goto err;
346
347 if (hp100_inw(HW_ID) != HP100_HW_ID_CASCADE) {
348 release_region(ioaddr, HP100_REGION_SIZE);
349 goto err;
350 }
351
352 sig = hp100_read_id(ioaddr);
353 release_region(ioaddr, HP100_REGION_SIZE);
354
355 if (sig == NULL)
356 goto err;
357
358 for (i = 0; i < ARRAY_SIZE(hp100_isa_tbl); i++) {
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400359 if (!strcmp(hp100_isa_tbl[i], sig))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700360 break;
361
362 }
363
364 if (i < ARRAY_SIZE(hp100_isa_tbl))
365 return hp100_probe1(dev, ioaddr, HP100_BUS_ISA, NULL);
366 err:
367 return -ENODEV;
368
369}
370/*
371 * Probe for ISA board.
372 * EISA and PCI are handled by device infrastructure.
373 */
374
375static int __init hp100_isa_probe(struct net_device *dev, int addr)
376{
377 int err = -ENODEV;
378
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400379 /* Probe for a specific ISA address */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700380 if (addr > 0xff && addr < 0x400)
381 err = hp100_isa_probe1(dev, addr);
382
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400383 else if (addr != 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700384 err = -ENXIO;
385
386 else {
387 /* Probe all ISA possible port regions */
388 for (addr = 0x100; addr < 0x400; addr += 0x20) {
389 err = hp100_isa_probe1(dev, addr);
390 if (!err)
391 break;
392 }
393 }
394 return err;
395}
Jeff Garzik7525d4b2006-10-02 21:08:22 -0400396#endif /* CONFIG_ISA */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700397
Jeff Garzik7525d4b2006-10-02 21:08:22 -0400398#if !defined(MODULE) && defined(CONFIG_ISA)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700399struct net_device * __init hp100_probe(int unit)
400{
401 struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private));
402 int err;
403
404 if (!dev)
405 return ERR_PTR(-ENODEV);
406
Linus Torvalds1da177e2005-04-16 15:20:36 -0700407#ifdef HP100_DEBUG_B
408 hp100_outw(0x4200, TRACE);
409 printk("hp100: %s: probe\n", dev->name);
410#endif
411
412 if (unit >= 0) {
413 sprintf(dev->name, "eth%d", unit);
414 netdev_boot_setup_check(dev);
415 }
416
417 err = hp100_isa_probe(dev, dev->base_addr);
418 if (err)
419 goto out;
420
Linus Torvalds1da177e2005-04-16 15:20:36 -0700421 return dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700422 out:
423 free_netdev(dev);
424 return ERR_PTR(err);
425}
Jeff Garzik7525d4b2006-10-02 21:08:22 -0400426#endif /* !MODULE && CONFIG_ISA */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700427
Stephen Hemmingerd9d6f462009-01-07 18:13:49 -0800428static const struct net_device_ops hp100_bm_netdev_ops = {
429 .ndo_open = hp100_open,
430 .ndo_stop = hp100_close,
431 .ndo_start_xmit = hp100_start_xmit_bm,
432 .ndo_get_stats = hp100_get_stats,
433 .ndo_set_multicast_list = hp100_set_multicast_list,
434 .ndo_change_mtu = eth_change_mtu,
435 .ndo_set_mac_address = eth_mac_addr,
436 .ndo_validate_addr = eth_validate_addr,
437};
438
439static const struct net_device_ops hp100_netdev_ops = {
440 .ndo_open = hp100_open,
441 .ndo_stop = hp100_close,
442 .ndo_start_xmit = hp100_start_xmit,
443 .ndo_get_stats = hp100_get_stats,
444 .ndo_set_multicast_list = hp100_set_multicast_list,
445 .ndo_change_mtu = eth_change_mtu,
446 .ndo_set_mac_address = eth_mac_addr,
447 .ndo_validate_addr = eth_validate_addr,
448};
449
Linus Torvalds1da177e2005-04-16 15:20:36 -0700450static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
451 u_char bus, struct pci_dev *pci_dev)
452{
453 int i;
454 int err = -ENODEV;
455 const char *eid;
456 u_int chip;
457 u_char uc;
458 u_int memory_size = 0, virt_memory_size = 0;
459 u_short local_mode, lsw;
460 short mem_mapped;
461 unsigned long mem_ptr_phys;
462 void __iomem *mem_ptr_virt;
463 struct hp100_private *lp;
464
465#ifdef HP100_DEBUG_B
466 hp100_outw(0x4201, TRACE);
467 printk("hp100: %s: probe1\n", dev->name);
468#endif
469
470 /* memory region for programmed i/o */
471 if (!request_region(ioaddr, HP100_REGION_SIZE, "hp100"))
472 goto out1;
473
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400474 if (hp100_inw(HW_ID) != HP100_HW_ID_CASCADE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700475 goto out2;
476
477 chip = hp100_inw(PAGING) & HP100_CHIPID_MASK;
478#ifdef HP100_DEBUG
479 if (chip == HP100_CHIPID_SHASTA)
480 printk("hp100: %s: Shasta Chip detected. (This is a pre 802.12 chip)\n", dev->name);
481 else if (chip == HP100_CHIPID_RAINIER)
482 printk("hp100: %s: Rainier Chip detected. (This is a pre 802.12 chip)\n", dev->name);
483 else if (chip == HP100_CHIPID_LASSEN)
484 printk("hp100: %s: Lassen Chip detected.\n", dev->name);
485 else
486 printk("hp100: %s: Warning: Unknown CASCADE chip (id=0x%.4x).\n", dev->name, chip);
487#endif
488
489 dev->base_addr = ioaddr;
490
491 eid = hp100_read_id(ioaddr);
492 if (eid == NULL) { /* bad checksum? */
493 printk(KERN_WARNING "hp100_probe: bad ID checksum at base port 0x%x\n", ioaddr);
494 goto out2;
495 }
496
497 hp100_page(ID_MAC_ADDR);
498 for (i = uc = 0; i < 7; i++)
499 uc += hp100_inb(LAN_ADDR + i);
500 if (uc != 0xff) {
501 printk(KERN_WARNING "hp100_probe: bad lan address checksum at port 0x%x)\n", ioaddr);
502 err = -EIO;
503 goto out2;
504 }
505
506 /* Make sure, that all registers are correctly updated... */
507
508 hp100_load_eeprom(dev, ioaddr);
509 wait();
510
511 /*
512 * Determine driver operation mode
513 *
514 * Use the variable "hp100_mode" upon insmod or as kernel parameter to
515 * force driver modes:
516 * hp100_mode=1 -> default, use busmaster mode if configured.
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400517 * hp100_mode=2 -> enable shared memory mode
Linus Torvalds1da177e2005-04-16 15:20:36 -0700518 * hp100_mode=3 -> force use of i/o mapped mode.
519 * hp100_mode=4 -> same as 1, but re-set the enable bit on the card.
520 */
521
522 /*
523 * LSW values:
524 * 0x2278 -> J2585B, PnP shared memory mode
525 * 0x2270 -> J2585B, shared memory mode, 0xdc000
526 * 0xa23c -> J2585B, I/O mapped mode
527 * 0x2240 -> EISA COMPEX, BusMaster (Shasta Chip)
528 * 0x2220 -> EISA HP, I/O (Shasta Chip)
529 * 0x2260 -> EISA HP, BusMaster (Shasta Chip)
530 */
531
532#if 0
533 local_mode = 0x2270;
534 hp100_outw(0xfefe, OPTION_LSW);
535 hp100_outw(local_mode | HP100_SET_LB | HP100_SET_HB, OPTION_LSW);
536#endif
537
538 /* hp100_mode value maybe used in future by another card */
539 local_mode = hp100_mode;
540 if (local_mode < 1 || local_mode > 4)
541 local_mode = 1; /* default */
542#ifdef HP100_DEBUG
543 printk("hp100: %s: original LSW = 0x%x\n", dev->name,
544 hp100_inw(OPTION_LSW));
545#endif
546
547 if (local_mode == 3) {
548 hp100_outw(HP100_MEM_EN | HP100_RESET_LB, OPTION_LSW);
549 hp100_outw(HP100_IO_EN | HP100_SET_LB, OPTION_LSW);
550 hp100_outw(HP100_BM_WRITE | HP100_BM_READ | HP100_RESET_HB, OPTION_LSW);
551 printk("hp100: IO mapped mode forced.\n");
552 } else if (local_mode == 2) {
553 hp100_outw(HP100_MEM_EN | HP100_SET_LB, OPTION_LSW);
554 hp100_outw(HP100_IO_EN | HP100_SET_LB, OPTION_LSW);
555 hp100_outw(HP100_BM_WRITE | HP100_BM_READ | HP100_RESET_HB, OPTION_LSW);
556 printk("hp100: Shared memory mode requested.\n");
557 } else if (local_mode == 4) {
558 if (chip == HP100_CHIPID_LASSEN) {
559 hp100_outw(HP100_BM_WRITE | HP100_BM_READ | HP100_SET_HB, OPTION_LSW);
560 hp100_outw(HP100_IO_EN | HP100_MEM_EN | HP100_RESET_LB, OPTION_LSW);
561 printk("hp100: Busmaster mode requested.\n");
562 }
563 local_mode = 1;
564 }
565
566 if (local_mode == 1) { /* default behaviour */
567 lsw = hp100_inw(OPTION_LSW);
568
569 if ((lsw & HP100_IO_EN) && (~lsw & HP100_MEM_EN) &&
570 (~lsw & (HP100_BM_WRITE | HP100_BM_READ))) {
571#ifdef HP100_DEBUG
572 printk("hp100: %s: IO_EN bit is set on card.\n", dev->name);
573#endif
574 local_mode = 3;
575 } else if (chip == HP100_CHIPID_LASSEN &&
576 (lsw & (HP100_BM_WRITE | HP100_BM_READ)) == (HP100_BM_WRITE | HP100_BM_READ)) {
577 /* Conversion to new PCI API :
578 * I don't have the doc, but I assume that the card
579 * can map the full 32bit address space.
580 * Also, we can have EISA Busmaster cards (not tested),
581 * so beware !!! - Jean II */
582 if((bus == HP100_BUS_PCI) &&
Yang Hongyang284901a2009-04-06 19:01:15 -0700583 (pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32)))) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700584 /* Gracefully fallback to shared memory */
585 goto busmasterfail;
586 }
587 printk("hp100: Busmaster mode enabled.\n");
588 hp100_outw(HP100_MEM_EN | HP100_IO_EN | HP100_RESET_LB, OPTION_LSW);
589 } else {
590 busmasterfail:
591#ifdef HP100_DEBUG
592 printk("hp100: %s: Card not configured for BM or BM not supported with this card.\n", dev->name);
593 printk("hp100: %s: Trying shared memory mode.\n", dev->name);
594#endif
595 /* In this case, try shared memory mode */
596 local_mode = 2;
597 hp100_outw(HP100_MEM_EN | HP100_SET_LB, OPTION_LSW);
598 /* hp100_outw(HP100_IO_EN|HP100_RESET_LB, OPTION_LSW); */
599 }
600 }
601#ifdef HP100_DEBUG
602 printk("hp100: %s: new LSW = 0x%x\n", dev->name, hp100_inw(OPTION_LSW));
603#endif
604
605 /* Check for shared memory on the card, eventually remap it */
606 hp100_page(HW_MAP);
607 mem_mapped = ((hp100_inw(OPTION_LSW) & (HP100_MEM_EN)) != 0);
608 mem_ptr_phys = 0UL;
609 mem_ptr_virt = NULL;
610 memory_size = (8192 << ((hp100_inb(SRAM) >> 5) & 0x07));
611 virt_memory_size = 0;
612
613 /* For memory mapped or busmaster mode, we want the memory address */
614 if (mem_mapped || (local_mode == 1)) {
615 mem_ptr_phys = (hp100_inw(MEM_MAP_LSW) | (hp100_inw(MEM_MAP_MSW) << 16));
616 mem_ptr_phys &= ~0x1fff; /* 8k alignment */
617
618 if (bus == HP100_BUS_ISA && (mem_ptr_phys & ~0xfffff) != 0) {
619 printk("hp100: Can only use programmed i/o mode.\n");
620 mem_ptr_phys = 0;
621 mem_mapped = 0;
622 local_mode = 3; /* Use programmed i/o */
623 }
624
625 /* We do not need access to shared memory in busmaster mode */
626 /* However in slave mode we need to remap high (>1GB) card memory */
627 if (local_mode != 1) { /* = not busmaster */
628 /* We try with smaller memory sizes, if ioremap fails */
629 for (virt_memory_size = memory_size; virt_memory_size > 16383; virt_memory_size >>= 1) {
630 if ((mem_ptr_virt = ioremap((u_long) mem_ptr_phys, virt_memory_size)) == NULL) {
631#ifdef HP100_DEBUG
632 printk("hp100: %s: ioremap for 0x%x bytes high PCI memory at 0x%lx failed\n", dev->name, virt_memory_size, mem_ptr_phys);
633#endif
634 } else {
635#ifdef HP100_DEBUG
636 printk("hp100: %s: remapped 0x%x bytes high PCI memory at 0x%lx to %p.\n", dev->name, virt_memory_size, mem_ptr_phys, mem_ptr_virt);
637#endif
638 break;
639 }
640 }
641
642 if (mem_ptr_virt == NULL) { /* all ioremap tries failed */
643 printk("hp100: Failed to ioremap the PCI card memory. Will have to use i/o mapped mode.\n");
644 local_mode = 3;
645 virt_memory_size = 0;
646 }
647 }
648 }
649
650 if (local_mode == 3) { /* io mapped forced */
651 mem_mapped = 0;
652 mem_ptr_phys = 0;
653 mem_ptr_virt = NULL;
654 printk("hp100: Using (slow) programmed i/o mode.\n");
655 }
656
657 /* Initialise the "private" data structure for this card. */
658 lp = netdev_priv(dev);
659
660 spin_lock_init(&lp->lock);
661 strlcpy(lp->id, eid, HP100_SIG_LEN);
662 lp->chip = chip;
663 lp->mode = local_mode;
664 lp->bus = bus;
665 lp->pci_dev = pci_dev;
666 lp->priority_tx = hp100_priority_tx;
667 lp->rx_ratio = hp100_rx_ratio;
668 lp->mem_ptr_phys = mem_ptr_phys;
669 lp->mem_ptr_virt = mem_ptr_virt;
670 hp100_page(ID_MAC_ADDR);
671 lp->soft_model = hp100_inb(SOFT_MODEL);
672 lp->mac1_mode = HP100_MAC1MODE3;
673 lp->mac2_mode = HP100_MAC2MODE3;
674 memset(&lp->hash_bytes, 0x00, 8);
675
676 dev->base_addr = ioaddr;
677
678 lp->memory_size = memory_size;
679 lp->virt_memory_size = virt_memory_size;
680 lp->rx_ratio = hp100_rx_ratio; /* can be conf'd with insmod */
681
Linus Torvalds1da177e2005-04-16 15:20:36 -0700682 if (lp->mode == 1) /* busmaster */
Stephen Hemmingerd9d6f462009-01-07 18:13:49 -0800683 dev->netdev_ops = &hp100_bm_netdev_ops;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700684 else
Stephen Hemmingerd9d6f462009-01-07 18:13:49 -0800685 dev->netdev_ops = &hp100_netdev_ops;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700686
687 /* Ask the card for which IRQ line it is configured */
688 if (bus == HP100_BUS_PCI) {
689 dev->irq = pci_dev->irq;
690 } else {
691 hp100_page(HW_MAP);
692 dev->irq = hp100_inb(IRQ_CHANNEL) & HP100_IRQMASK;
693 if (dev->irq == 2)
694 dev->irq = 9;
695 }
696
697 if (lp->mode == 1) /* busmaster */
698 dev->dma = 4;
699
700 /* Ask the card for its MAC address and store it for later use. */
701 hp100_page(ID_MAC_ADDR);
702 for (i = uc = 0; i < 6; i++)
703 dev->dev_addr[i] = hp100_inb(LAN_ADDR + i);
704
705 /* Reset statistics (counters) */
706 hp100_clear_stats(lp, ioaddr);
707
708 /* If busmaster mode is wanted, a dma-capable memory area is needed for
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400709 * the rx and tx PDLs
Linus Torvalds1da177e2005-04-16 15:20:36 -0700710 * PCI cards can access the whole PC memory. Therefore GFP_DMA is not
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400711 * needed for the allocation of the memory area.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700712 */
713
714 /* TODO: We do not need this with old cards, where PDLs are stored
715 * in the cards shared memory area. But currently, busmaster has been
716 * implemented/tested only with the lassen chip anyway... */
717 if (lp->mode == 1) { /* busmaster */
718 dma_addr_t page_baddr;
719 /* Get physically continous memory for TX & RX PDLs */
720 /* Conversion to new PCI API :
721 * Pages are always aligned and zeroed, no need to it ourself.
722 * Doc says should be OK for EISA bus as well - Jean II */
723 if ((lp->page_vaddr_algn = pci_alloc_consistent(lp->pci_dev, MAX_RINGSIZE, &page_baddr)) == NULL) {
724 err = -ENOMEM;
725 goto out2;
726 }
727 lp->whatever_offset = ((u_long) page_baddr) - ((u_long) lp->page_vaddr_algn);
728
729#ifdef HP100_DEBUG_BM
730 printk("hp100: %s: Reserved DMA memory from 0x%x to 0x%x\n", dev->name, (u_int) lp->page_vaddr_algn, (u_int) lp->page_vaddr_algn + MAX_RINGSIZE);
731#endif
732 lp->rxrcommit = lp->txrcommit = 0;
733 lp->rxrhead = lp->rxrtail = &(lp->rxring[0]);
734 lp->txrhead = lp->txrtail = &(lp->txring[0]);
735 }
736
737 /* Initialise the card. */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400738 /* (I'm not really sure if it's a good idea to do this during probing, but
Linus Torvalds1da177e2005-04-16 15:20:36 -0700739 * like this it's assured that the lan connection type can be sensed
740 * correctly)
741 */
742 hp100_hwinit(dev);
743
744 /* Try to find out which kind of LAN the card is connected to. */
745 lp->lan_type = hp100_sense_lan(dev);
746
747 /* Print out a message what about what we think we have probed. */
748 printk("hp100: at 0x%x, IRQ %d, ", ioaddr, dev->irq);
749 switch (bus) {
750 case HP100_BUS_EISA:
751 printk("EISA");
752 break;
753 case HP100_BUS_PCI:
754 printk("PCI");
755 break;
756 default:
757 printk("ISA");
758 break;
759 }
760 printk(" bus, %dk SRAM (rx/tx %d%%).\n", lp->memory_size >> 10, lp->rx_ratio);
761
762 if (lp->mode == 2) { /* memory mapped */
763 printk("hp100: Memory area at 0x%lx-0x%lx", mem_ptr_phys,
764 (mem_ptr_phys + (mem_ptr_phys > 0x100000 ? (u_long) lp->memory_size : 16 * 1024)) - 1);
765 if (mem_ptr_virt)
766 printk(" (virtual base %p)", mem_ptr_virt);
767 printk(".\n");
768
769 /* Set for info when doing ifconfig */
770 dev->mem_start = mem_ptr_phys;
771 dev->mem_end = mem_ptr_phys + lp->memory_size;
772 }
773
774 printk("hp100: ");
775 if (lp->lan_type != HP100_LAN_ERR)
776 printk("Adapter is attached to ");
777 switch (lp->lan_type) {
778 case HP100_LAN_100:
779 printk("100Mb/s Voice Grade AnyLAN network.\n");
780 break;
781 case HP100_LAN_10:
782 printk("10Mb/s network (10baseT).\n");
783 break;
784 case HP100_LAN_COAX:
785 printk("10Mb/s network (coax).\n");
786 break;
787 default:
788 printk("Warning! Link down.\n");
789 }
790
b1fc5502005-05-12 20:11:55 -0400791 err = register_netdev(dev);
792 if (err)
793 goto out3;
794
Linus Torvalds1da177e2005-04-16 15:20:36 -0700795 return 0;
b1fc5502005-05-12 20:11:55 -0400796out3:
797 if (local_mode == 1)
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400798 pci_free_consistent(lp->pci_dev, MAX_RINGSIZE + 0x0f,
799 lp->page_vaddr_algn,
b1fc5502005-05-12 20:11:55 -0400800 virt_to_whatever(dev, lp->page_vaddr_algn));
801 if (mem_ptr_virt)
802 iounmap(mem_ptr_virt);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700803out2:
804 release_region(ioaddr, HP100_REGION_SIZE);
805out1:
b1fc5502005-05-12 20:11:55 -0400806 return err;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700807}
808
809/* This procedure puts the card into a stable init state */
810static void hp100_hwinit(struct net_device *dev)
811{
812 int ioaddr = dev->base_addr;
813 struct hp100_private *lp = netdev_priv(dev);
814
815#ifdef HP100_DEBUG_B
816 hp100_outw(0x4202, TRACE);
817 printk("hp100: %s: hwinit\n", dev->name);
818#endif
819
820 /* Initialise the card. -------------------------------------------- */
821
822 /* Clear all pending Ints and disable Ints */
823 hp100_page(PERFORMANCE);
824 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
825 hp100_outw(0xffff, IRQ_STATUS); /* clear all pending ints */
826
827 hp100_outw(HP100_INT_EN | HP100_RESET_LB, OPTION_LSW);
828 hp100_outw(HP100_TRI_INT | HP100_SET_HB, OPTION_LSW);
829
830 if (lp->mode == 1) {
831 hp100_BM_shutdown(dev); /* disables BM, puts cascade in reset */
832 wait();
833 } else {
834 hp100_outw(HP100_INT_EN | HP100_RESET_LB, OPTION_LSW);
835 hp100_cascade_reset(dev, 1);
836 hp100_page(MAC_CTRL);
837 hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1);
838 }
839
840 /* Initiate EEPROM reload */
841 hp100_load_eeprom(dev, 0);
842
843 wait();
844
845 /* Go into reset again. */
846 hp100_cascade_reset(dev, 1);
847
848 /* Set Option Registers to a safe state */
849 hp100_outw(HP100_DEBUG_EN |
850 HP100_RX_HDR |
851 HP100_EE_EN |
852 HP100_BM_WRITE |
853 HP100_BM_READ | HP100_RESET_HB |
854 HP100_FAKE_INT |
855 HP100_INT_EN |
856 HP100_MEM_EN |
857 HP100_IO_EN | HP100_RESET_LB, OPTION_LSW);
858
859 hp100_outw(HP100_TRI_INT |
860 HP100_MMAP_DIS | HP100_SET_HB, OPTION_LSW);
861
862 hp100_outb(HP100_PRIORITY_TX |
863 HP100_ADV_NXT_PKT |
864 HP100_TX_CMD | HP100_RESET_LB, OPTION_MSW);
865
866 /* TODO: Configure MMU for Ram Test. */
867 /* TODO: Ram Test. */
868
869 /* Re-check if adapter is still at same i/o location */
870 /* (If the base i/o in eeprom has been changed but the */
871 /* registers had not been changed, a reload of the eeprom */
872 /* would move the adapter to the address stored in eeprom */
873
874 /* TODO: Code to implement. */
875
876 /* Until here it was code from HWdiscover procedure. */
877 /* Next comes code from mmuinit procedure of SCO BM driver which is
878 * called from HWconfigure in the SCO driver. */
879
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400880 /* Initialise MMU, eventually switch on Busmaster Mode, initialise
Linus Torvalds1da177e2005-04-16 15:20:36 -0700881 * multicast filter...
882 */
883 hp100_mmuinit(dev);
884
885 /* We don't turn the interrupts on here - this is done by start_interface. */
886 wait(); /* TODO: Do we really need this? */
887
888 /* Enable Hardware (e.g. unreset) */
889 hp100_cascade_reset(dev, 0);
890
891 /* ------- initialisation complete ----------- */
892
893 /* Finally try to log in the Hub if there may be a VG connection. */
894 if ((lp->lan_type == HP100_LAN_100) || (lp->lan_type == HP100_LAN_ERR))
895 hp100_login_to_vg_hub(dev, 0); /* relogin */
896
897}
Linus Torvalds1da177e2005-04-16 15:20:36 -0700898
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400899
900/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700901 * mmuinit - Reinitialise Cascade MMU and MAC settings.
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400902 * Note: Must already be in reset and leaves card in reset.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700903 */
904static void hp100_mmuinit(struct net_device *dev)
905{
906 int ioaddr = dev->base_addr;
907 struct hp100_private *lp = netdev_priv(dev);
908 int i;
909
910#ifdef HP100_DEBUG_B
911 hp100_outw(0x4203, TRACE);
912 printk("hp100: %s: mmuinit\n", dev->name);
913#endif
914
915#ifdef HP100_DEBUG
916 if (0 != (hp100_inw(OPTION_LSW) & HP100_HW_RST)) {
917 printk("hp100: %s: Not in reset when entering mmuinit. Fix me.\n", dev->name);
918 return;
919 }
920#endif
921
922 /* Make sure IRQs are masked off and ack'ed. */
923 hp100_page(PERFORMANCE);
924 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
925 hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
926
927 /*
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400928 * Enable Hardware
Linus Torvalds1da177e2005-04-16 15:20:36 -0700929 * - Clear Debug En, Rx Hdr Pipe, EE En, I/O En, Fake Int and Intr En
930 * - Set Tri-State Int, Bus Master Rd/Wr, and Mem Map Disable
931 * - Clear Priority, Advance Pkt and Xmit Cmd
932 */
933
934 hp100_outw(HP100_DEBUG_EN |
935 HP100_RX_HDR |
936 HP100_EE_EN | HP100_RESET_HB |
937 HP100_IO_EN |
938 HP100_FAKE_INT |
939 HP100_INT_EN | HP100_RESET_LB, OPTION_LSW);
940
941 hp100_outw(HP100_TRI_INT | HP100_SET_HB, OPTION_LSW);
942
943 if (lp->mode == 1) { /* busmaster */
944 hp100_outw(HP100_BM_WRITE |
945 HP100_BM_READ |
946 HP100_MMAP_DIS | HP100_SET_HB, OPTION_LSW);
947 } else if (lp->mode == 2) { /* memory mapped */
948 hp100_outw(HP100_BM_WRITE |
949 HP100_BM_READ | HP100_RESET_HB, OPTION_LSW);
950 hp100_outw(HP100_MMAP_DIS | HP100_RESET_HB, OPTION_LSW);
951 hp100_outw(HP100_MEM_EN | HP100_SET_LB, OPTION_LSW);
952 hp100_outw(HP100_IO_EN | HP100_SET_LB, OPTION_LSW);
953 } else if (lp->mode == 3) { /* i/o mapped mode */
954 hp100_outw(HP100_MMAP_DIS | HP100_SET_HB |
955 HP100_IO_EN | HP100_SET_LB, OPTION_LSW);
956 }
957
958 hp100_page(HW_MAP);
959 hp100_outb(0, EARLYRXCFG);
960 hp100_outw(0, EARLYTXCFG);
961
962 /*
963 * Enable Bus Master mode
964 */
965 if (lp->mode == 1) { /* busmaster */
966 /* Experimental: Set some PCI configuration bits */
967 hp100_page(HW_MAP);
968 hp100_andb(~HP100_PDL_USE3, MODECTRL1); /* BM engine read maximum */
969 hp100_andb(~HP100_TX_DUALQ, MODECTRL1); /* No Queue for Priority TX */
970
971 /* PCI Bus failures should result in a Misc. Interrupt */
972 hp100_orb(HP100_EN_BUS_FAIL, MODECTRL2);
973
974 hp100_outw(HP100_BM_READ | HP100_BM_WRITE | HP100_SET_HB, OPTION_LSW);
975 hp100_page(HW_MAP);
976 /* Use Burst Mode and switch on PAGE_CK */
977 hp100_orb(HP100_BM_BURST_RD | HP100_BM_BURST_WR, BM);
978 if ((lp->chip == HP100_CHIPID_RAINIER) || (lp->chip == HP100_CHIPID_SHASTA))
979 hp100_orb(HP100_BM_PAGE_CK, BM);
980 hp100_orb(HP100_BM_MASTER, BM);
981 } else { /* not busmaster */
982
983 hp100_page(HW_MAP);
984 hp100_andb(~HP100_BM_MASTER, BM);
985 }
986
987 /*
988 * Divide card memory into regions for Rx, Tx and, if non-ETR chip, PDLs
989 */
990 hp100_page(MMU_CFG);
991 if (lp->mode == 1) { /* only needed for Busmaster */
992 int xmit_stop, recv_stop;
993
994 if ((lp->chip == HP100_CHIPID_RAINIER)
995 || (lp->chip == HP100_CHIPID_SHASTA)) {
996 int pdl_stop;
997
998 /*
999 * Each pdl is 508 bytes long. (63 frags * 4 bytes for address and
1000 * 4 bytes for header). We will leave NUM_RXPDLS * 508 (rounded
1001 * to the next higher 1k boundary) bytes for the rx-pdl's
1002 * Note: For non-etr chips the transmit stop register must be
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001003 * programmed on a 1k boundary, i.e. bits 9:0 must be zero.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001004 */
1005 pdl_stop = lp->memory_size;
1006 xmit_stop = (pdl_stop - 508 * (MAX_RX_PDL) - 16) & ~(0x03ff);
1007 recv_stop = (xmit_stop * (lp->rx_ratio) / 100) & ~(0x03ff);
1008 hp100_outw((pdl_stop >> 4) - 1, PDL_MEM_STOP);
1009#ifdef HP100_DEBUG_BM
1010 printk("hp100: %s: PDL_STOP = 0x%x\n", dev->name, pdl_stop);
1011#endif
1012 } else {
1013 /* ETR chip (Lassen) in busmaster mode */
1014 xmit_stop = (lp->memory_size) - 1;
1015 recv_stop = ((lp->memory_size * lp->rx_ratio) / 100) & ~(0x03ff);
1016 }
1017
1018 hp100_outw(xmit_stop >> 4, TX_MEM_STOP);
1019 hp100_outw(recv_stop >> 4, RX_MEM_STOP);
1020#ifdef HP100_DEBUG_BM
1021 printk("hp100: %s: TX_STOP = 0x%x\n", dev->name, xmit_stop >> 4);
1022 printk("hp100: %s: RX_STOP = 0x%x\n", dev->name, recv_stop >> 4);
1023#endif
1024 } else {
1025 /* Slave modes (memory mapped and programmed io) */
1026 hp100_outw((((lp->memory_size * lp->rx_ratio) / 100) >> 4), RX_MEM_STOP);
1027 hp100_outw(((lp->memory_size - 1) >> 4), TX_MEM_STOP);
1028#ifdef HP100_DEBUG
1029 printk("hp100: %s: TX_MEM_STOP: 0x%x\n", dev->name, hp100_inw(TX_MEM_STOP));
1030 printk("hp100: %s: RX_MEM_STOP: 0x%x\n", dev->name, hp100_inw(RX_MEM_STOP));
1031#endif
1032 }
1033
1034 /* Write MAC address into page 1 */
1035 hp100_page(MAC_ADDRESS);
1036 for (i = 0; i < 6; i++)
1037 hp100_outb(dev->dev_addr[i], MAC_ADDR + i);
1038
1039 /* Zero the multicast hash registers */
1040 for (i = 0; i < 8; i++)
1041 hp100_outb(0x0, HASH_BYTE0 + i);
1042
1043 /* Set up MAC defaults */
1044 hp100_page(MAC_CTRL);
1045
1046 /* Go to LAN Page and zero all filter bits */
1047 /* Zero accept error, accept multicast, accept broadcast and accept */
1048 /* all directed packet bits */
1049 hp100_andb(~(HP100_RX_EN |
1050 HP100_TX_EN |
1051 HP100_ACC_ERRORED |
1052 HP100_ACC_MC |
1053 HP100_ACC_BC | HP100_ACC_PHY), MAC_CFG_1);
1054
1055 hp100_outb(0x00, MAC_CFG_2);
1056
1057 /* Zero the frame format bit. This works around a training bug in the */
1058 /* new hubs. */
1059 hp100_outb(0x00, VG_LAN_CFG_2); /* (use 802.3) */
1060
1061 if (lp->priority_tx)
1062 hp100_outb(HP100_PRIORITY_TX | HP100_SET_LB, OPTION_MSW);
1063 else
1064 hp100_outb(HP100_PRIORITY_TX | HP100_RESET_LB, OPTION_MSW);
1065
1066 hp100_outb(HP100_ADV_NXT_PKT |
1067 HP100_TX_CMD | HP100_RESET_LB, OPTION_MSW);
1068
1069 /* If busmaster, initialize the PDLs */
1070 if (lp->mode == 1)
1071 hp100_init_pdls(dev);
1072
1073 /* Go to performance page and initalize isr and imr registers */
1074 hp100_page(PERFORMANCE);
1075 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
1076 hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
1077}
1078
1079/*
1080 * open/close functions
1081 */
1082
1083static int hp100_open(struct net_device *dev)
1084{
1085 struct hp100_private *lp = netdev_priv(dev);
1086#ifdef HP100_DEBUG_B
1087 int ioaddr = dev->base_addr;
1088#endif
1089
1090#ifdef HP100_DEBUG_B
1091 hp100_outw(0x4204, TRACE);
1092 printk("hp100: %s: open\n", dev->name);
1093#endif
1094
1095 /* New: if bus is PCI or EISA, interrupts might be shared interrupts */
1096 if (request_irq(dev->irq, hp100_interrupt,
1097 lp->bus == HP100_BUS_PCI || lp->bus ==
Thomas Gleixner1fb9df52006-07-01 19:29:39 -07001098 HP100_BUS_EISA ? IRQF_SHARED : IRQF_DISABLED,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001099 "hp100", dev)) {
1100 printk("hp100: %s: unable to get IRQ %d\n", dev->name, dev->irq);
1101 return -EAGAIN;
1102 }
1103
1104 dev->trans_start = jiffies;
1105 netif_start_queue(dev);
1106
1107 lp->lan_type = hp100_sense_lan(dev);
1108 lp->mac1_mode = HP100_MAC1MODE3;
1109 lp->mac2_mode = HP100_MAC2MODE3;
1110 memset(&lp->hash_bytes, 0x00, 8);
1111
1112 hp100_stop_interface(dev);
1113
1114 hp100_hwinit(dev);
1115
1116 hp100_start_interface(dev); /* sets mac modes, enables interrupts */
1117
1118 return 0;
1119}
1120
1121/* The close function is called when the interface is to be brought down */
1122static int hp100_close(struct net_device *dev)
1123{
1124 int ioaddr = dev->base_addr;
1125 struct hp100_private *lp = netdev_priv(dev);
1126
1127#ifdef HP100_DEBUG_B
1128 hp100_outw(0x4205, TRACE);
1129 printk("hp100: %s: close\n", dev->name);
1130#endif
1131
1132 hp100_page(PERFORMANCE);
1133 hp100_outw(0xfefe, IRQ_MASK); /* mask off all IRQs */
1134
1135 hp100_stop_interface(dev);
1136
1137 if (lp->lan_type == HP100_LAN_100)
1138 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1139
1140 netif_stop_queue(dev);
1141
1142 free_irq(dev->irq, dev);
1143
1144#ifdef HP100_DEBUG
1145 printk("hp100: %s: close LSW = 0x%x\n", dev->name,
1146 hp100_inw(OPTION_LSW));
1147#endif
1148
1149 return 0;
1150}
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001151
Linus Torvalds1da177e2005-04-16 15:20:36 -07001152
1153/*
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001154 * Configure the PDL Rx rings and LAN
Linus Torvalds1da177e2005-04-16 15:20:36 -07001155 */
1156static void hp100_init_pdls(struct net_device *dev)
1157{
1158 struct hp100_private *lp = netdev_priv(dev);
1159 hp100_ring_t *ringptr;
1160 u_int *pageptr; /* Warning : increment by 4 - Jean II */
1161 int i;
1162
1163#ifdef HP100_DEBUG_B
1164 int ioaddr = dev->base_addr;
1165#endif
1166
1167#ifdef HP100_DEBUG_B
1168 hp100_outw(0x4206, TRACE);
1169 printk("hp100: %s: init pdls\n", dev->name);
1170#endif
1171
Al Viro79ea13c2008-01-24 02:06:46 -08001172 if (!lp->page_vaddr_algn)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001173 printk("hp100: %s: Warning: lp->page_vaddr_algn not initialised!\n", dev->name);
1174 else {
1175 /* pageptr shall point into the DMA accessible memory region */
1176 /* we use this pointer to status the upper limit of allocated */
1177 /* memory in the allocated page. */
1178 /* note: align the pointers to the pci cache line size */
1179 memset(lp->page_vaddr_algn, 0, MAX_RINGSIZE); /* Zero Rx/Tx ring page */
1180 pageptr = lp->page_vaddr_algn;
1181
1182 lp->rxrcommit = 0;
1183 ringptr = lp->rxrhead = lp->rxrtail = &(lp->rxring[0]);
1184
1185 /* Initialise Rx Ring */
1186 for (i = MAX_RX_PDL - 1; i >= 0; i--) {
1187 lp->rxring[i].next = ringptr;
1188 ringptr = &(lp->rxring[i]);
1189 pageptr += hp100_init_rxpdl(dev, ringptr, pageptr);
1190 }
1191
1192 /* Initialise Tx Ring */
1193 lp->txrcommit = 0;
1194 ringptr = lp->txrhead = lp->txrtail = &(lp->txring[0]);
1195 for (i = MAX_TX_PDL - 1; i >= 0; i--) {
1196 lp->txring[i].next = ringptr;
1197 ringptr = &(lp->txring[i]);
1198 pageptr += hp100_init_txpdl(dev, ringptr, pageptr);
1199 }
1200 }
1201}
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001202
Linus Torvalds1da177e2005-04-16 15:20:36 -07001203
1204/* These functions "format" the entries in the pdl structure */
1205/* They return how much memory the fragments need. */
1206static int hp100_init_rxpdl(struct net_device *dev,
1207 register hp100_ring_t * ringptr,
1208 register u32 * pdlptr)
1209{
1210 /* pdlptr is starting address for this pdl */
1211
1212 if (0 != (((unsigned long) pdlptr) & 0xf))
1213 printk("hp100: %s: Init rxpdl: Unaligned pdlptr 0x%lx.\n",
1214 dev->name, (unsigned long) pdlptr);
1215
1216 ringptr->pdl = pdlptr + 1;
1217 ringptr->pdl_paddr = virt_to_whatever(dev, pdlptr + 1);
1218 ringptr->skb = (void *) NULL;
1219
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001220 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07001221 * Write address and length of first PDL Fragment (which is used for
1222 * storing the RX-Header
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001223 * We use the 4 bytes _before_ the PDH in the pdl memory area to
Linus Torvalds1da177e2005-04-16 15:20:36 -07001224 * store this information. (PDH is at offset 0x04)
1225 */
1226 /* Note that pdlptr+1 and not pdlptr is the pointer to the PDH */
1227
1228 *(pdlptr + 2) = (u_int) virt_to_whatever(dev, pdlptr); /* Address Frag 1 */
1229 *(pdlptr + 3) = 4; /* Length Frag 1 */
1230
Ilpo Järvinenc40cf512008-12-16 01:14:21 -08001231 return roundup(MAX_RX_FRAG * 2 + 2, 4);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001232}
1233
1234
1235static int hp100_init_txpdl(struct net_device *dev,
1236 register hp100_ring_t * ringptr,
1237 register u32 * pdlptr)
1238{
1239 if (0 != (((unsigned long) pdlptr) & 0xf))
1240 printk("hp100: %s: Init txpdl: Unaligned pdlptr 0x%lx.\n", dev->name, (unsigned long) pdlptr);
1241
1242 ringptr->pdl = pdlptr; /* +1; */
1243 ringptr->pdl_paddr = virt_to_whatever(dev, pdlptr); /* +1 */
1244 ringptr->skb = (void *) NULL;
1245
Ilpo Järvinenc40cf512008-12-16 01:14:21 -08001246 return roundup(MAX_TX_FRAG * 2 + 2, 4);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001247}
1248
1249/*
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001250 * hp100_build_rx_pdl allocates an skb_buff of maximum size plus two bytes
Linus Torvalds1da177e2005-04-16 15:20:36 -07001251 * for possible odd word alignment rounding up to next dword and set PDL
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001252 * address for fragment#2
Linus Torvalds1da177e2005-04-16 15:20:36 -07001253 * Returns: 0 if unable to allocate skb_buff
1254 * 1 if successful
1255 */
1256static int hp100_build_rx_pdl(hp100_ring_t * ringptr,
1257 struct net_device *dev)
1258{
1259#ifdef HP100_DEBUG_B
1260 int ioaddr = dev->base_addr;
1261#endif
1262#ifdef HP100_DEBUG_BM
1263 u_int *p;
1264#endif
1265
1266#ifdef HP100_DEBUG_B
1267 hp100_outw(0x4207, TRACE);
1268 printk("hp100: %s: build rx pdl\n", dev->name);
1269#endif
1270
1271 /* Allocate skb buffer of maximum size */
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001272 /* Note: This depends on the alloc_skb functions allocating more
Linus Torvalds1da177e2005-04-16 15:20:36 -07001273 * space than requested, i.e. aligning to 16bytes */
1274
Ilpo Järvinenc40cf512008-12-16 01:14:21 -08001275 ringptr->skb = dev_alloc_skb(roundup(MAX_ETHER_SIZE + 2, 4));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001276
1277 if (NULL != ringptr->skb) {
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001278 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07001279 * Reserve 2 bytes at the head of the buffer to land the IP header
1280 * on a long word boundary (According to the Network Driver section
1281 * in the Linux KHG, this should help to increase performance.)
1282 */
1283 skb_reserve(ringptr->skb, 2);
1284
1285 ringptr->skb->dev = dev;
1286 ringptr->skb->data = (u_char *) skb_put(ringptr->skb, MAX_ETHER_SIZE);
1287
1288 /* ringptr->pdl points to the beginning of the PDL, i.e. the PDH */
1289 /* Note: 1st Fragment is used for the 4 byte packet status
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001290 * (receive header). Its PDL entries are set up by init_rxpdl. So
Linus Torvalds1da177e2005-04-16 15:20:36 -07001291 * here we only have to set up the PDL fragment entries for the data
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001292 * part. Those 4 bytes will be stored in the DMA memory region
1293 * directly before the PDL.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001294 */
1295#ifdef HP100_DEBUG_BM
1296 printk("hp100: %s: build_rx_pdl: PDH@0x%x, skb->data (len %d) at 0x%x\n",
1297 dev->name, (u_int) ringptr->pdl,
Ilpo Järvinenc40cf512008-12-16 01:14:21 -08001298 roundup(MAX_ETHER_SIZE + 2, 4),
Linus Torvalds1da177e2005-04-16 15:20:36 -07001299 (unsigned int) ringptr->skb->data);
1300#endif
1301
1302 /* Conversion to new PCI API : map skbuf data to PCI bus.
1303 * Doc says it's OK for EISA as well - Jean II */
1304 ringptr->pdl[0] = 0x00020000; /* Write PDH */
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001305 ringptr->pdl[3] = pdl_map_data(netdev_priv(dev),
Linus Torvalds1da177e2005-04-16 15:20:36 -07001306 ringptr->skb->data);
1307 ringptr->pdl[4] = MAX_ETHER_SIZE; /* Length of Data */
1308
1309#ifdef HP100_DEBUG_BM
1310 for (p = (ringptr->pdl); p < (ringptr->pdl + 5); p++)
1311 printk("hp100: %s: Adr 0x%.8x = 0x%.8x\n", dev->name, (u_int) p, (u_int) * p);
1312#endif
1313 return (1);
1314 }
1315 /* else: */
1316 /* alloc_skb failed (no memory) -> still can receive the header
1317 * fragment into PDL memory. make PDL safe by clearing msgptr and
1318 * making the PDL only 1 fragment (i.e. the 4 byte packet status)
1319 */
1320#ifdef HP100_DEBUG_BM
1321 printk("hp100: %s: build_rx_pdl: PDH@0x%x, No space for skb.\n", dev->name, (u_int) ringptr->pdl);
1322#endif
1323
1324 ringptr->pdl[0] = 0x00010000; /* PDH: Count=1 Fragment */
1325
1326 return (0);
1327}
1328
1329/*
1330 * hp100_rxfill - attempt to fill the Rx Ring will empty skb's
1331 *
1332 * Makes assumption that skb's are always contiguous memory areas and
1333 * therefore PDLs contain only 2 physical fragments.
1334 * - While the number of Rx PDLs with buffers is less than maximum
1335 * a. Get a maximum packet size skb
1336 * b. Put the physical address of the buffer into the PDL.
1337 * c. Output physical address of PDL to adapter.
1338 */
1339static void hp100_rxfill(struct net_device *dev)
1340{
1341 int ioaddr = dev->base_addr;
1342
1343 struct hp100_private *lp = netdev_priv(dev);
1344 hp100_ring_t *ringptr;
1345
1346#ifdef HP100_DEBUG_B
1347 hp100_outw(0x4208, TRACE);
1348 printk("hp100: %s: rxfill\n", dev->name);
1349#endif
1350
1351 hp100_page(PERFORMANCE);
1352
1353 while (lp->rxrcommit < MAX_RX_PDL) {
1354 /*
1355 ** Attempt to get a buffer and build a Rx PDL.
1356 */
1357 ringptr = lp->rxrtail;
1358 if (0 == hp100_build_rx_pdl(ringptr, dev)) {
1359 return; /* None available, return */
1360 }
1361
1362 /* Hand this PDL over to the card */
1363 /* Note: This needs performance page selected! */
1364#ifdef HP100_DEBUG_BM
1365 printk("hp100: %s: rxfill: Hand to card: pdl #%d @0x%x phys:0x%x, buffer: 0x%x\n",
1366 dev->name, lp->rxrcommit, (u_int) ringptr->pdl,
1367 (u_int) ringptr->pdl_paddr, (u_int) ringptr->pdl[3]);
1368#endif
1369
1370 hp100_outl((u32) ringptr->pdl_paddr, RX_PDA);
1371
1372 lp->rxrcommit += 1;
1373 lp->rxrtail = ringptr->next;
1374 }
1375}
1376
1377/*
1378 * BM_shutdown - shutdown bus mastering and leave chip in reset state
1379 */
1380
1381static void hp100_BM_shutdown(struct net_device *dev)
1382{
1383 int ioaddr = dev->base_addr;
1384 struct hp100_private *lp = netdev_priv(dev);
1385 unsigned long time;
1386
1387#ifdef HP100_DEBUG_B
1388 hp100_outw(0x4209, TRACE);
1389 printk("hp100: %s: bm shutdown\n", dev->name);
1390#endif
1391
1392 hp100_page(PERFORMANCE);
1393 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
1394 hp100_outw(0xffff, IRQ_STATUS); /* Ack all ints */
1395
1396 /* Ensure Interrupts are off */
1397 hp100_outw(HP100_INT_EN | HP100_RESET_LB, OPTION_LSW);
1398
1399 /* Disable all MAC activity */
1400 hp100_page(MAC_CTRL);
1401 hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1); /* stop rx/tx */
1402
1403 /* If cascade MMU is not already in reset */
1404 if (0 != (hp100_inw(OPTION_LSW) & HP100_HW_RST)) {
1405 /* Wait 1.3ms (10Mb max packet time) to ensure MAC is idle so
1406 * MMU pointers will not be reset out from underneath
1407 */
1408 hp100_page(MAC_CTRL);
1409 for (time = 0; time < 5000; time++) {
1410 if ((hp100_inb(MAC_CFG_1) & (HP100_TX_IDLE | HP100_RX_IDLE)) == (HP100_TX_IDLE | HP100_RX_IDLE))
1411 break;
1412 }
1413
1414 /* Shutdown algorithm depends on the generation of Cascade */
1415 if (lp->chip == HP100_CHIPID_LASSEN) { /* ETR shutdown/reset */
1416 /* Disable Busmaster mode and wait for bit to go to zero. */
1417 hp100_page(HW_MAP);
1418 hp100_andb(~HP100_BM_MASTER, BM);
1419 /* 100 ms timeout */
1420 for (time = 0; time < 32000; time++) {
1421 if (0 == (hp100_inb(BM) & HP100_BM_MASTER))
1422 break;
1423 }
1424 } else { /* Shasta or Rainier Shutdown/Reset */
1425 /* To ensure all bus master inloading activity has ceased,
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001426 * wait for no Rx PDAs or no Rx packets on card.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001427 */
1428 hp100_page(PERFORMANCE);
1429 /* 100 ms timeout */
1430 for (time = 0; time < 10000; time++) {
1431 /* RX_PDL: PDLs not executed. */
1432 /* RX_PKT_CNT: RX'd packets on card. */
1433 if ((hp100_inb(RX_PDL) == 0) && (hp100_inb(RX_PKT_CNT) == 0))
1434 break;
1435 }
1436
1437 if (time >= 10000)
1438 printk("hp100: %s: BM shutdown error.\n", dev->name);
1439
1440 /* To ensure all bus master outloading activity has ceased,
1441 * wait until the Tx PDA count goes to zero or no more Tx space
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001442 * available in the Tx region of the card.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001443 */
1444 /* 100 ms timeout */
1445 for (time = 0; time < 10000; time++) {
1446 if ((0 == hp100_inb(TX_PKT_CNT)) &&
1447 (0 != (hp100_inb(TX_MEM_FREE) & HP100_AUTO_COMPARE)))
1448 break;
1449 }
1450
1451 /* Disable Busmaster mode */
1452 hp100_page(HW_MAP);
1453 hp100_andb(~HP100_BM_MASTER, BM);
1454 } /* end of shutdown procedure for non-etr parts */
1455
1456 hp100_cascade_reset(dev, 1);
1457 }
1458 hp100_page(PERFORMANCE);
1459 /* hp100_outw( HP100_BM_READ | HP100_BM_WRITE | HP100_RESET_HB, OPTION_LSW ); */
1460 /* Busmaster mode should be shut down now. */
1461}
1462
1463static int hp100_check_lan(struct net_device *dev)
1464{
1465 struct hp100_private *lp = netdev_priv(dev);
1466
1467 if (lp->lan_type < 0) { /* no LAN type detected yet? */
1468 hp100_stop_interface(dev);
1469 if ((lp->lan_type = hp100_sense_lan(dev)) < 0) {
1470 printk("hp100: %s: no connection found - check wire\n", dev->name);
1471 hp100_start_interface(dev); /* 10Mb/s RX packets maybe handled */
1472 return -EIO;
1473 }
1474 if (lp->lan_type == HP100_LAN_100)
1475 lp->hub_status = hp100_login_to_vg_hub(dev, 0); /* relogin */
1476 hp100_start_interface(dev);
1477 }
1478 return 0;
1479}
1480
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001481/*
Linus Torvalds1da177e2005-04-16 15:20:36 -07001482 * transmit functions
1483 */
1484
1485/* tx function for busmaster mode */
1486static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev)
1487{
1488 unsigned long flags;
1489 int i, ok_flag;
1490 int ioaddr = dev->base_addr;
1491 struct hp100_private *lp = netdev_priv(dev);
1492 hp100_ring_t *ringptr;
1493
1494#ifdef HP100_DEBUG_B
1495 hp100_outw(0x4210, TRACE);
1496 printk("hp100: %s: start_xmit_bm\n", dev->name);
1497#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -07001498 if (skb->len <= 0)
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001499 goto drop;
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001500
Herbert Xu5b057c62006-06-23 02:06:41 -07001501 if (lp->chip == HP100_CHIPID_SHASTA && skb_padto(skb, ETH_ZLEN))
Patrick McHardy6ed10652009-06-23 06:03:08 +00001502 return NETDEV_TX_OK;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001503
1504 /* Get Tx ring tail pointer */
1505 if (lp->txrtail->next == lp->txrhead) {
1506 /* No memory. */
1507#ifdef HP100_DEBUG
1508 printk("hp100: %s: start_xmit_bm: No TX PDL available.\n", dev->name);
1509#endif
1510 /* not waited long enough since last tx? */
Marcelo Feitoza Parisiff5688a2006-01-09 18:37:15 -08001511 if (time_before(jiffies, dev->trans_start + HZ))
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001512 goto drop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001513
1514 if (hp100_check_lan(dev))
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001515 goto drop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001516
1517 if (lp->lan_type == HP100_LAN_100 && lp->hub_status < 0) {
1518 /* we have a 100Mb/s adapter but it isn't connected to hub */
1519 printk("hp100: %s: login to 100Mb/s hub retry\n", dev->name);
1520 hp100_stop_interface(dev);
1521 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1522 hp100_start_interface(dev);
1523 } else {
1524 spin_lock_irqsave(&lp->lock, flags);
1525 hp100_ints_off(); /* Useful ? Jean II */
1526 i = hp100_sense_lan(dev);
1527 hp100_ints_on();
1528 spin_unlock_irqrestore(&lp->lock, flags);
1529 if (i == HP100_LAN_ERR)
1530 printk("hp100: %s: link down detected\n", dev->name);
1531 else if (lp->lan_type != i) { /* cable change! */
1532 /* it's very hard - all network settings must be changed!!! */
1533 printk("hp100: %s: cable change 10Mb/s <-> 100Mb/s detected\n", dev->name);
1534 lp->lan_type = i;
1535 hp100_stop_interface(dev);
1536 if (lp->lan_type == HP100_LAN_100)
1537 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1538 hp100_start_interface(dev);
1539 } else {
1540 printk("hp100: %s: interface reset\n", dev->name);
1541 hp100_stop_interface(dev);
1542 if (lp->lan_type == HP100_LAN_100)
1543 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1544 hp100_start_interface(dev);
1545 }
1546 }
1547
1548 dev->trans_start = jiffies;
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001549 goto drop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001550 }
1551
1552 /*
1553 * we have to turn int's off before modifying this, otherwise
1554 * a tx_pdl_cleanup could occur at the same time
1555 */
1556 spin_lock_irqsave(&lp->lock, flags);
1557 ringptr = lp->txrtail;
1558 lp->txrtail = ringptr->next;
1559
1560 /* Check whether packet has minimal packet size */
1561 ok_flag = skb->len >= HP100_MIN_PACKET_SIZE;
1562 i = ok_flag ? skb->len : HP100_MIN_PACKET_SIZE;
1563
1564 ringptr->skb = skb;
1565 ringptr->pdl[0] = ((1 << 16) | i); /* PDH: 1 Fragment & length */
1566 if (lp->chip == HP100_CHIPID_SHASTA) {
1567 /* TODO:Could someone who has the EISA card please check if this works? */
1568 ringptr->pdl[2] = i;
1569 } else { /* Lassen */
1570 /* In the PDL, don't use the padded size but the real packet size: */
1571 ringptr->pdl[2] = skb->len; /* 1st Frag: Length of frag */
1572 }
1573 /* Conversion to new PCI API : map skbuf data to PCI bus.
1574 * Doc says it's OK for EISA as well - Jean II */
1575 ringptr->pdl[1] = ((u32) pci_map_single(lp->pci_dev, skb->data, ringptr->pdl[2], PCI_DMA_TODEVICE)); /* 1st Frag: Adr. of data */
1576
1577 /* Hand this PDL to the card. */
1578 hp100_outl(ringptr->pdl_paddr, TX_PDA_L); /* Low Prio. Queue */
1579
1580 lp->txrcommit++;
1581 spin_unlock_irqrestore(&lp->lock, flags);
1582
1583 /* Update statistics */
1584 lp->stats.tx_packets++;
1585 lp->stats.tx_bytes += skb->len;
1586 dev->trans_start = jiffies;
1587
Patrick McHardy6ed10652009-06-23 06:03:08 +00001588 return NETDEV_TX_OK;
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001589
1590drop:
1591 dev_kfree_skb(skb);
1592 return NETDEV_TX_OK;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001593}
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001594
Linus Torvalds1da177e2005-04-16 15:20:36 -07001595
1596/* clean_txring checks if packets have been sent by the card by reading
1597 * the TX_PDL register from the performance page and comparing it to the
1598 * number of commited packets. It then frees the skb's of the packets that
1599 * obviously have been sent to the network.
1600 *
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001601 * Needs the PERFORMANCE page selected.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001602 */
1603static void hp100_clean_txring(struct net_device *dev)
1604{
1605 struct hp100_private *lp = netdev_priv(dev);
1606 int ioaddr = dev->base_addr;
1607 int donecount;
1608
1609#ifdef HP100_DEBUG_B
1610 hp100_outw(0x4211, TRACE);
1611 printk("hp100: %s: clean txring\n", dev->name);
1612#endif
1613
1614 /* How many PDLs have been transmitted? */
1615 donecount = (lp->txrcommit) - hp100_inb(TX_PDL);
1616
1617#ifdef HP100_DEBUG
1618 if (donecount > MAX_TX_PDL)
1619 printk("hp100: %s: Warning: More PDLs transmitted than commited to card???\n", dev->name);
1620#endif
1621
1622 for (; 0 != donecount; donecount--) {
1623#ifdef HP100_DEBUG_BM
1624 printk("hp100: %s: Free skb: data @0x%.8x txrcommit=0x%x TXPDL=0x%x, done=0x%x\n",
1625 dev->name, (u_int) lp->txrhead->skb->data,
1626 lp->txrcommit, hp100_inb(TX_PDL), donecount);
1627#endif
1628 /* Conversion to new PCI API : NOP */
1629 pci_unmap_single(lp->pci_dev, (dma_addr_t) lp->txrhead->pdl[1], lp->txrhead->pdl[2], PCI_DMA_TODEVICE);
1630 dev_kfree_skb_any(lp->txrhead->skb);
1631 lp->txrhead->skb = (void *) NULL;
1632 lp->txrhead = lp->txrhead->next;
1633 lp->txrcommit--;
1634 }
1635}
1636
1637/* tx function for slave modes */
1638static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev)
1639{
1640 unsigned long flags;
1641 int i, ok_flag;
1642 int ioaddr = dev->base_addr;
1643 u_short val;
1644 struct hp100_private *lp = netdev_priv(dev);
1645
1646#ifdef HP100_DEBUG_B
1647 hp100_outw(0x4212, TRACE);
1648 printk("hp100: %s: start_xmit\n", dev->name);
1649#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -07001650 if (skb->len <= 0)
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001651 goto drop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001652
1653 if (hp100_check_lan(dev))
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001654 goto drop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001655
1656 /* If there is not enough free memory on the card... */
1657 i = hp100_inl(TX_MEM_FREE) & 0x7fffffff;
1658 if (!(((i / 2) - 539) > (skb->len + 16) && (hp100_inb(TX_PKT_CNT) < 255))) {
1659#ifdef HP100_DEBUG
1660 printk("hp100: %s: start_xmit: tx free mem = 0x%x\n", dev->name, i);
1661#endif
1662 /* not waited long enough since last failed tx try? */
Marcelo Feitoza Parisiff5688a2006-01-09 18:37:15 -08001663 if (time_before(jiffies, dev->trans_start + HZ)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001664#ifdef HP100_DEBUG
1665 printk("hp100: %s: trans_start timing problem\n",
1666 dev->name);
1667#endif
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001668 goto drop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001669 }
1670 if (lp->lan_type == HP100_LAN_100 && lp->hub_status < 0) {
1671 /* we have a 100Mb/s adapter but it isn't connected to hub */
1672 printk("hp100: %s: login to 100Mb/s hub retry\n", dev->name);
1673 hp100_stop_interface(dev);
1674 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1675 hp100_start_interface(dev);
1676 } else {
1677 spin_lock_irqsave(&lp->lock, flags);
1678 hp100_ints_off(); /* Useful ? Jean II */
1679 i = hp100_sense_lan(dev);
1680 hp100_ints_on();
1681 spin_unlock_irqrestore(&lp->lock, flags);
1682 if (i == HP100_LAN_ERR)
1683 printk("hp100: %s: link down detected\n", dev->name);
1684 else if (lp->lan_type != i) { /* cable change! */
1685 /* it's very hard - all network setting must be changed!!! */
1686 printk("hp100: %s: cable change 10Mb/s <-> 100Mb/s detected\n", dev->name);
1687 lp->lan_type = i;
1688 hp100_stop_interface(dev);
1689 if (lp->lan_type == HP100_LAN_100)
1690 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1691 hp100_start_interface(dev);
1692 } else {
1693 printk("hp100: %s: interface reset\n", dev->name);
1694 hp100_stop_interface(dev);
1695 if (lp->lan_type == HP100_LAN_100)
1696 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1697 hp100_start_interface(dev);
1698 mdelay(1);
1699 }
1700 }
1701 dev->trans_start = jiffies;
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001702 goto drop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001703 }
1704
1705 for (i = 0; i < 6000 && (hp100_inb(OPTION_MSW) & HP100_TX_CMD); i++) {
1706#ifdef HP100_DEBUG_TX
1707 printk("hp100: %s: start_xmit: busy\n", dev->name);
1708#endif
1709 }
1710
1711 spin_lock_irqsave(&lp->lock, flags);
1712 hp100_ints_off();
1713 val = hp100_inw(IRQ_STATUS);
1714 /* Ack / clear the interrupt TX_COMPLETE interrupt - this interrupt is set
1715 * when the current packet being transmitted on the wire is completed. */
1716 hp100_outw(HP100_TX_COMPLETE, IRQ_STATUS);
1717#ifdef HP100_DEBUG_TX
1718 printk("hp100: %s: start_xmit: irq_status=0x%.4x, irqmask=0x%.4x, len=%d\n",
1719 dev->name, val, hp100_inw(IRQ_MASK), (int) skb->len);
1720#endif
1721
1722 ok_flag = skb->len >= HP100_MIN_PACKET_SIZE;
1723 i = ok_flag ? skb->len : HP100_MIN_PACKET_SIZE;
1724
1725 hp100_outw(i, DATA32); /* tell card the total packet length */
1726 hp100_outw(i, FRAGMENT_LEN); /* and first/only fragment length */
1727
1728 if (lp->mode == 2) { /* memory mapped */
Al Viro450d86d2005-12-22 14:52:52 -05001729 /* Note: The J2585B needs alignment to 32bits here! */
1730 memcpy_toio(lp->mem_ptr_virt, skb->data, (skb->len + 3) & ~3);
1731 if (!ok_flag)
1732 memset_io(lp->mem_ptr_virt, 0, HP100_MIN_PACKET_SIZE - skb->len);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001733 } else { /* programmed i/o */
1734 outsl(ioaddr + HP100_REG_DATA32, skb->data,
1735 (skb->len + 3) >> 2);
1736 if (!ok_flag)
1737 for (i = (skb->len + 3) & ~3; i < HP100_MIN_PACKET_SIZE; i += 4)
1738 hp100_outl(0, DATA32);
1739 }
1740
1741 hp100_outb(HP100_TX_CMD | HP100_SET_LB, OPTION_MSW); /* send packet */
1742
1743 lp->stats.tx_packets++;
1744 lp->stats.tx_bytes += skb->len;
1745 dev->trans_start = jiffies;
1746 hp100_ints_on();
1747 spin_unlock_irqrestore(&lp->lock, flags);
1748
1749 dev_kfree_skb_any(skb);
1750
1751#ifdef HP100_DEBUG_TX
1752 printk("hp100: %s: start_xmit: end\n", dev->name);
1753#endif
1754
Patrick McHardy6ed10652009-06-23 06:03:08 +00001755 return NETDEV_TX_OK;
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001756
1757drop:
1758 dev_kfree_skb(skb);
1759 return NETDEV_TX_OK;
1760
Linus Torvalds1da177e2005-04-16 15:20:36 -07001761}
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001762
Linus Torvalds1da177e2005-04-16 15:20:36 -07001763
1764/*
1765 * Receive Function (Non-Busmaster mode)
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001766 * Called when an "Receive Packet" interrupt occurs, i.e. the receive
Linus Torvalds1da177e2005-04-16 15:20:36 -07001767 * packet counter is non-zero.
1768 * For non-busmaster, this function does the whole work of transfering
1769 * the packet to the host memory and then up to higher layers via skb
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001770 * and netif_rx.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001771 */
1772
1773static void hp100_rx(struct net_device *dev)
1774{
1775 int packets, pkt_len;
1776 int ioaddr = dev->base_addr;
1777 struct hp100_private *lp = netdev_priv(dev);
1778 u_int header;
1779 struct sk_buff *skb;
1780
1781#ifdef DEBUG_B
1782 hp100_outw(0x4213, TRACE);
1783 printk("hp100: %s: rx\n", dev->name);
1784#endif
1785
1786 /* First get indication of received lan packet */
1787 /* RX_PKT_CND indicates the number of packets which have been fully */
1788 /* received onto the card but have not been fully transferred of the card */
1789 packets = hp100_inb(RX_PKT_CNT);
1790#ifdef HP100_DEBUG_RX
1791 if (packets > 1)
1792 printk("hp100: %s: rx: waiting packets = %d\n", dev->name, packets);
1793#endif
1794
1795 while (packets-- > 0) {
1796 /* If ADV_NXT_PKT is still set, we have to wait until the card has */
1797 /* really advanced to the next packet. */
1798 for (pkt_len = 0; pkt_len < 6000 && (hp100_inb(OPTION_MSW) & HP100_ADV_NXT_PKT); pkt_len++) {
1799#ifdef HP100_DEBUG_RX
1800 printk ("hp100: %s: rx: busy, remaining packets = %d\n", dev->name, packets);
1801#endif
1802 }
1803
1804 /* First we get the header, which contains information about the */
1805 /* actual length of the received packet. */
1806 if (lp->mode == 2) { /* memory mapped mode */
Al Viro450d86d2005-12-22 14:52:52 -05001807 header = readl(lp->mem_ptr_virt);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001808 } else /* programmed i/o */
1809 header = hp100_inl(DATA32);
1810
1811 pkt_len = ((header & HP100_PKT_LEN_MASK) + 3) & ~3;
1812
1813#ifdef HP100_DEBUG_RX
1814 printk("hp100: %s: rx: new packet - length=%d, errors=0x%x, dest=0x%x\n",
1815 dev->name, header & HP100_PKT_LEN_MASK,
1816 (header >> 16) & 0xfff8, (header >> 16) & 7);
1817#endif
1818
1819 /* Now we allocate the skb and transfer the data into it. */
1820 skb = dev_alloc_skb(pkt_len+2);
1821 if (skb == NULL) { /* Not enough memory->drop packet */
1822#ifdef HP100_DEBUG
1823 printk("hp100: %s: rx: couldn't allocate a sk_buff of size %d\n",
1824 dev->name, pkt_len);
1825#endif
1826 lp->stats.rx_dropped++;
1827 } else { /* skb successfully allocated */
1828
1829 u_char *ptr;
1830
1831 skb_reserve(skb,2);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001832
1833 /* ptr to start of the sk_buff data area */
1834 skb_put(skb, pkt_len);
1835 ptr = skb->data;
1836
1837 /* Now transfer the data from the card into that area */
Al Viro450d86d2005-12-22 14:52:52 -05001838 if (lp->mode == 2)
1839 memcpy_fromio(ptr, lp->mem_ptr_virt,pkt_len);
1840 else /* io mapped */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001841 insl(ioaddr + HP100_REG_DATA32, ptr, pkt_len >> 2);
1842
1843 skb->protocol = eth_type_trans(skb, dev);
1844
1845#ifdef HP100_DEBUG_RX
1846 printk("hp100: %s: rx: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
1847 dev->name, ptr[0], ptr[1], ptr[2], ptr[3],
1848 ptr[4], ptr[5], ptr[6], ptr[7], ptr[8],
1849 ptr[9], ptr[10], ptr[11]);
1850#endif
1851 netif_rx(skb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001852 lp->stats.rx_packets++;
1853 lp->stats.rx_bytes += pkt_len;
1854 }
1855
1856 /* Indicate the card that we have got the packet */
1857 hp100_outb(HP100_ADV_NXT_PKT | HP100_SET_LB, OPTION_MSW);
1858
1859 switch (header & 0x00070000) {
1860 case (HP100_MULTI_ADDR_HASH << 16):
1861 case (HP100_MULTI_ADDR_NO_HASH << 16):
1862 lp->stats.multicast++;
1863 break;
1864 }
1865 } /* end of while(there are packets) loop */
1866#ifdef HP100_DEBUG_RX
1867 printk("hp100_rx: %s: end\n", dev->name);
1868#endif
1869}
1870
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001871/*
Linus Torvalds1da177e2005-04-16 15:20:36 -07001872 * Receive Function for Busmaster Mode
1873 */
1874static void hp100_rx_bm(struct net_device *dev)
1875{
1876 int ioaddr = dev->base_addr;
1877 struct hp100_private *lp = netdev_priv(dev);
1878 hp100_ring_t *ptr;
1879 u_int header;
1880 int pkt_len;
1881
1882#ifdef HP100_DEBUG_B
1883 hp100_outw(0x4214, TRACE);
1884 printk("hp100: %s: rx_bm\n", dev->name);
1885#endif
1886
1887#ifdef HP100_DEBUG
1888 if (0 == lp->rxrcommit) {
1889 printk("hp100: %s: rx_bm called although no PDLs were committed to adapter?\n", dev->name);
1890 return;
1891 } else
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001892 /* RX_PKT_CNT states how many PDLs are currently formatted and available to
Linus Torvalds1da177e2005-04-16 15:20:36 -07001893 * the cards BM engine */
1894 if ((hp100_inw(RX_PKT_CNT) & 0x00ff) >= lp->rxrcommit) {
1895 printk("hp100: %s: More packets received than commited? RX_PKT_CNT=0x%x, commit=0x%x\n",
1896 dev->name, hp100_inw(RX_PKT_CNT) & 0x00ff,
1897 lp->rxrcommit);
1898 return;
1899 }
1900#endif
1901
1902 while ((lp->rxrcommit > hp100_inb(RX_PDL))) {
1903 /*
1904 * The packet was received into the pdl pointed to by lp->rxrhead (
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001905 * the oldest pdl in the ring
Linus Torvalds1da177e2005-04-16 15:20:36 -07001906 */
1907
1908 /* First we get the header, which contains information about the */
1909 /* actual length of the received packet. */
1910
1911 ptr = lp->rxrhead;
1912
1913 header = *(ptr->pdl - 1);
1914 pkt_len = (header & HP100_PKT_LEN_MASK);
1915
1916 /* Conversion to new PCI API : NOP */
1917 pci_unmap_single(lp->pci_dev, (dma_addr_t) ptr->pdl[3], MAX_ETHER_SIZE, PCI_DMA_FROMDEVICE);
1918
1919#ifdef HP100_DEBUG_BM
1920 printk("hp100: %s: rx_bm: header@0x%x=0x%x length=%d, errors=0x%x, dest=0x%x\n",
1921 dev->name, (u_int) (ptr->pdl - 1), (u_int) header,
1922 pkt_len, (header >> 16) & 0xfff8, (header >> 16) & 7);
1923 printk("hp100: %s: RX_PDL_COUNT:0x%x TX_PDL_COUNT:0x%x, RX_PKT_CNT=0x%x PDH=0x%x, Data@0x%x len=0x%x\n",
1924 dev->name, hp100_inb(RX_PDL), hp100_inb(TX_PDL),
1925 hp100_inb(RX_PKT_CNT), (u_int) * (ptr->pdl),
1926 (u_int) * (ptr->pdl + 3), (u_int) * (ptr->pdl + 4));
1927#endif
1928
1929 if ((pkt_len >= MIN_ETHER_SIZE) &&
1930 (pkt_len <= MAX_ETHER_SIZE)) {
1931 if (ptr->skb == NULL) {
1932 printk("hp100: %s: rx_bm: skb null\n", dev->name);
1933 /* can happen if we only allocated room for the pdh due to memory shortage. */
1934 lp->stats.rx_dropped++;
1935 } else {
1936 skb_trim(ptr->skb, pkt_len); /* Shorten it */
1937 ptr->skb->protocol =
1938 eth_type_trans(ptr->skb, dev);
1939
1940 netif_rx(ptr->skb); /* Up and away... */
1941
Linus Torvalds1da177e2005-04-16 15:20:36 -07001942 lp->stats.rx_packets++;
1943 lp->stats.rx_bytes += pkt_len;
1944 }
1945
1946 switch (header & 0x00070000) {
1947 case (HP100_MULTI_ADDR_HASH << 16):
1948 case (HP100_MULTI_ADDR_NO_HASH << 16):
1949 lp->stats.multicast++;
1950 break;
1951 }
1952 } else {
1953#ifdef HP100_DEBUG
1954 printk("hp100: %s: rx_bm: Received bad packet (length=%d)\n", dev->name, pkt_len);
1955#endif
1956 if (ptr->skb != NULL)
1957 dev_kfree_skb_any(ptr->skb);
1958 lp->stats.rx_errors++;
1959 }
1960
1961 lp->rxrhead = lp->rxrhead->next;
1962
1963 /* Allocate a new rx PDL (so lp->rxrcommit stays the same) */
1964 if (0 == hp100_build_rx_pdl(lp->rxrtail, dev)) {
1965 /* No space for skb, header can still be received. */
1966#ifdef HP100_DEBUG
1967 printk("hp100: %s: rx_bm: No space for new PDL.\n", dev->name);
1968#endif
1969 return;
1970 } else { /* successfully allocated new PDL - put it in ringlist at tail. */
1971 hp100_outl((u32) lp->rxrtail->pdl_paddr, RX_PDA);
1972 lp->rxrtail = lp->rxrtail->next;
1973 }
1974
1975 }
1976}
1977
1978/*
1979 * statistics
1980 */
1981static struct net_device_stats *hp100_get_stats(struct net_device *dev)
1982{
1983 unsigned long flags;
1984 int ioaddr = dev->base_addr;
1985 struct hp100_private *lp = netdev_priv(dev);
1986
1987#ifdef HP100_DEBUG_B
1988 hp100_outw(0x4215, TRACE);
1989#endif
1990
1991 spin_lock_irqsave(&lp->lock, flags);
1992 hp100_ints_off(); /* Useful ? Jean II */
1993 hp100_update_stats(dev);
1994 hp100_ints_on();
1995 spin_unlock_irqrestore(&lp->lock, flags);
1996 return &(lp->stats);
1997}
1998
1999static void hp100_update_stats(struct net_device *dev)
2000{
2001 int ioaddr = dev->base_addr;
2002 u_short val;
2003 struct hp100_private *lp = netdev_priv(dev);
2004
2005#ifdef HP100_DEBUG_B
2006 hp100_outw(0x4216, TRACE);
2007 printk("hp100: %s: update-stats\n", dev->name);
2008#endif
2009
2010 /* Note: Statistics counters clear when read. */
2011 hp100_page(MAC_CTRL);
2012 val = hp100_inw(DROPPED) & 0x0fff;
2013 lp->stats.rx_errors += val;
2014 lp->stats.rx_over_errors += val;
2015 val = hp100_inb(CRC);
2016 lp->stats.rx_errors += val;
2017 lp->stats.rx_crc_errors += val;
2018 val = hp100_inb(ABORT);
2019 lp->stats.tx_errors += val;
2020 lp->stats.tx_aborted_errors += val;
2021 hp100_page(PERFORMANCE);
2022}
2023
2024static void hp100_misc_interrupt(struct net_device *dev)
2025{
2026#ifdef HP100_DEBUG_B
2027 int ioaddr = dev->base_addr;
2028#endif
2029 struct hp100_private *lp = netdev_priv(dev);
2030
2031#ifdef HP100_DEBUG_B
2032 int ioaddr = dev->base_addr;
2033 hp100_outw(0x4216, TRACE);
2034 printk("hp100: %s: misc_interrupt\n", dev->name);
2035#endif
2036
2037 /* Note: Statistics counters clear when read. */
2038 lp->stats.rx_errors++;
2039 lp->stats.tx_errors++;
2040}
2041
2042static void hp100_clear_stats(struct hp100_private *lp, int ioaddr)
2043{
2044 unsigned long flags;
2045
2046#ifdef HP100_DEBUG_B
2047 hp100_outw(0x4217, TRACE);
2048 printk("hp100: %s: clear_stats\n", dev->name);
2049#endif
2050
2051 spin_lock_irqsave(&lp->lock, flags);
2052 hp100_page(MAC_CTRL); /* get all statistics bytes */
2053 hp100_inw(DROPPED);
2054 hp100_inb(CRC);
2055 hp100_inb(ABORT);
2056 hp100_page(PERFORMANCE);
2057 spin_unlock_irqrestore(&lp->lock, flags);
2058}
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002059
Linus Torvalds1da177e2005-04-16 15:20:36 -07002060
2061/*
2062 * multicast setup
2063 */
2064
2065/*
2066 * Set or clear the multicast filter for this adapter.
2067 */
2068
2069static void hp100_set_multicast_list(struct net_device *dev)
2070{
2071 unsigned long flags;
2072 int ioaddr = dev->base_addr;
2073 struct hp100_private *lp = netdev_priv(dev);
2074
2075#ifdef HP100_DEBUG_B
2076 hp100_outw(0x4218, TRACE);
2077 printk("hp100: %s: set_mc_list\n", dev->name);
2078#endif
2079
2080 spin_lock_irqsave(&lp->lock, flags);
2081 hp100_ints_off();
2082 hp100_page(MAC_CTRL);
2083 hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1); /* stop rx/tx */
2084
2085 if (dev->flags & IFF_PROMISC) {
2086 lp->mac2_mode = HP100_MAC2MODE6; /* promiscuous mode = get all good */
2087 lp->mac1_mode = HP100_MAC1MODE6; /* packets on the net */
2088 memset(&lp->hash_bytes, 0xff, 8);
2089 } else if (dev->mc_count || (dev->flags & IFF_ALLMULTI)) {
2090 lp->mac2_mode = HP100_MAC2MODE5; /* multicast mode = get packets for */
2091 lp->mac1_mode = HP100_MAC1MODE5; /* me, broadcasts and all multicasts */
2092#ifdef HP100_MULTICAST_FILTER /* doesn't work!!! */
2093 if (dev->flags & IFF_ALLMULTI) {
2094 /* set hash filter to receive all multicast packets */
2095 memset(&lp->hash_bytes, 0xff, 8);
2096 } else {
2097 int i, j, idx;
2098 u_char *addrs;
2099 struct dev_mc_list *dmi;
2100
2101 memset(&lp->hash_bytes, 0x00, 8);
2102#ifdef HP100_DEBUG
2103 printk("hp100: %s: computing hash filter - mc_count = %i\n", dev->name, dev->mc_count);
2104#endif
2105 for (i = 0, dmi = dev->mc_list; i < dev->mc_count; i++, dmi = dmi->next) {
2106 addrs = dmi->dmi_addr;
2107 if ((*addrs & 0x01) == 0x01) { /* multicast address? */
2108#ifdef HP100_DEBUG
Johannes Berge1749612008-10-27 15:59:26 -07002109 printk("hp100: %s: multicast = %pM, ",
2110 dev->name, addrs);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002111#endif
2112 for (j = idx = 0; j < 6; j++) {
2113 idx ^= *addrs++ & 0x3f;
2114 printk(":%02x:", idx);
2115 }
2116#ifdef HP100_DEBUG
2117 printk("idx = %i\n", idx);
2118#endif
2119 lp->hash_bytes[idx >> 3] |= (1 << (idx & 7));
2120 }
2121 }
2122 }
2123#else
2124 memset(&lp->hash_bytes, 0xff, 8);
2125#endif
2126 } else {
2127 lp->mac2_mode = HP100_MAC2MODE3; /* normal mode = get packets for me */
2128 lp->mac1_mode = HP100_MAC1MODE3; /* and broadcasts */
2129 memset(&lp->hash_bytes, 0x00, 8);
2130 }
2131
2132 if (((hp100_inb(MAC_CFG_1) & 0x0f) != lp->mac1_mode) ||
2133 (hp100_inb(MAC_CFG_2) != lp->mac2_mode)) {
2134 int i;
2135
2136 hp100_outb(lp->mac2_mode, MAC_CFG_2);
2137 hp100_andb(HP100_MAC1MODEMASK, MAC_CFG_1); /* clear mac1 mode bits */
2138 hp100_orb(lp->mac1_mode, MAC_CFG_1); /* and set the new mode */
2139
2140 hp100_page(MAC_ADDRESS);
2141 for (i = 0; i < 8; i++)
2142 hp100_outb(lp->hash_bytes[i], HASH_BYTE0 + i);
2143#ifdef HP100_DEBUG
2144 printk("hp100: %s: mac1 = 0x%x, mac2 = 0x%x, multicast hash = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
2145 dev->name, lp->mac1_mode, lp->mac2_mode,
2146 lp->hash_bytes[0], lp->hash_bytes[1],
2147 lp->hash_bytes[2], lp->hash_bytes[3],
2148 lp->hash_bytes[4], lp->hash_bytes[5],
2149 lp->hash_bytes[6], lp->hash_bytes[7]);
2150#endif
2151
2152 if (lp->lan_type == HP100_LAN_100) {
2153#ifdef HP100_DEBUG
2154 printk("hp100: %s: 100VG MAC settings have changed - relogin.\n", dev->name);
2155#endif
2156 lp->hub_status = hp100_login_to_vg_hub(dev, 1); /* force a relogin to the hub */
2157 }
2158 } else {
2159 int i;
2160 u_char old_hash_bytes[8];
2161
2162 hp100_page(MAC_ADDRESS);
2163 for (i = 0; i < 8; i++)
2164 old_hash_bytes[i] = hp100_inb(HASH_BYTE0 + i);
2165 if (memcmp(old_hash_bytes, &lp->hash_bytes, 8)) {
2166 for (i = 0; i < 8; i++)
2167 hp100_outb(lp->hash_bytes[i], HASH_BYTE0 + i);
2168#ifdef HP100_DEBUG
2169 printk("hp100: %s: multicast hash = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
2170 dev->name, lp->hash_bytes[0],
2171 lp->hash_bytes[1], lp->hash_bytes[2],
2172 lp->hash_bytes[3], lp->hash_bytes[4],
2173 lp->hash_bytes[5], lp->hash_bytes[6],
2174 lp->hash_bytes[7]);
2175#endif
2176
2177 if (lp->lan_type == HP100_LAN_100) {
2178#ifdef HP100_DEBUG
2179 printk("hp100: %s: 100VG MAC settings have changed - relogin.\n", dev->name);
2180#endif
2181 lp->hub_status = hp100_login_to_vg_hub(dev, 1); /* force a relogin to the hub */
2182 }
2183 }
2184 }
2185
2186 hp100_page(MAC_CTRL);
2187 hp100_orb(HP100_RX_EN | HP100_RX_IDLE | /* enable rx */
2188 HP100_TX_EN | HP100_TX_IDLE, MAC_CFG_1); /* enable tx */
2189
2190 hp100_page(PERFORMANCE);
2191 hp100_ints_on();
2192 spin_unlock_irqrestore(&lp->lock, flags);
2193}
2194
2195/*
2196 * hardware interrupt handling
2197 */
2198
David Howells7d12e782006-10-05 14:55:46 +01002199static irqreturn_t hp100_interrupt(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002200{
2201 struct net_device *dev = (struct net_device *) dev_id;
2202 struct hp100_private *lp = netdev_priv(dev);
2203
2204 int ioaddr;
2205 u_int val;
2206
2207 if (dev == NULL)
2208 return IRQ_NONE;
2209 ioaddr = dev->base_addr;
2210
2211 spin_lock(&lp->lock);
2212
2213 hp100_ints_off();
2214
2215#ifdef HP100_DEBUG_B
2216 hp100_outw(0x4219, TRACE);
2217#endif
2218
2219 /* hp100_page( PERFORMANCE ); */
2220 val = hp100_inw(IRQ_STATUS);
2221#ifdef HP100_DEBUG_IRQ
2222 printk("hp100: %s: mode=%x,IRQ_STAT=0x%.4x,RXPKTCNT=0x%.2x RXPDL=0x%.2x TXPKTCNT=0x%.2x TXPDL=0x%.2x\n",
2223 dev->name, lp->mode, (u_int) val, hp100_inb(RX_PKT_CNT),
2224 hp100_inb(RX_PDL), hp100_inb(TX_PKT_CNT), hp100_inb(TX_PDL));
2225#endif
2226
2227 if (val == 0) { /* might be a shared interrupt */
2228 spin_unlock(&lp->lock);
2229 hp100_ints_on();
2230 return IRQ_NONE;
2231 }
2232 /* We're only interested in those interrupts we really enabled. */
2233 /* val &= hp100_inw( IRQ_MASK ); */
2234
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002235 /*
2236 * RX_PDL_FILL_COMPL is set whenever a RX_PDL has been executed. A RX_PDL
2237 * is considered executed whenever the RX_PDL data structure is no longer
Linus Torvalds1da177e2005-04-16 15:20:36 -07002238 * needed.
2239 */
2240 if (val & HP100_RX_PDL_FILL_COMPL) {
2241 if (lp->mode == 1)
2242 hp100_rx_bm(dev);
2243 else {
2244 printk("hp100: %s: rx_pdl_fill_compl interrupt although not busmaster?\n", dev->name);
2245 }
2246 }
2247
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002248 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07002249 * The RX_PACKET interrupt is set, when the receive packet counter is
2250 * non zero. We use this interrupt for receiving in slave mode. In
2251 * busmaster mode, we use it to make sure we did not miss any rx_pdl_fill
2252 * interrupts. If rx_pdl_fill_compl is not set and rx_packet is set, then
2253 * we somehow have missed a rx_pdl_fill_compl interrupt.
2254 */
2255
2256 if (val & HP100_RX_PACKET) { /* Receive Packet Counter is non zero */
2257 if (lp->mode != 1) /* non busmaster */
2258 hp100_rx(dev);
2259 else if (!(val & HP100_RX_PDL_FILL_COMPL)) {
2260 /* Shouldnt happen - maybe we missed a RX_PDL_FILL Interrupt? */
2261 hp100_rx_bm(dev);
2262 }
2263 }
2264
2265 /*
2266 * Ack. that we have noticed the interrupt and thereby allow next one.
2267 * Note that this is now done after the slave rx function, since first
2268 * acknowledging and then setting ADV_NXT_PKT caused an extra interrupt
2269 * on the J2573.
2270 */
2271 hp100_outw(val, IRQ_STATUS);
2272
2273 /*
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002274 * RX_ERROR is set when a packet is dropped due to no memory resources on
2275 * the card or when a RCV_ERR occurs.
2276 * TX_ERROR is set when a TX_ABORT condition occurs in the MAC->exists
2277 * only in the 802.3 MAC and happens when 16 collisions occur during a TX
Linus Torvalds1da177e2005-04-16 15:20:36 -07002278 */
2279 if (val & (HP100_TX_ERROR | HP100_RX_ERROR)) {
2280#ifdef HP100_DEBUG_IRQ
2281 printk("hp100: %s: TX/RX Error IRQ\n", dev->name);
2282#endif
2283 hp100_update_stats(dev);
2284 if (lp->mode == 1) {
2285 hp100_rxfill(dev);
2286 hp100_clean_txring(dev);
2287 }
2288 }
2289
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002290 /*
2291 * RX_PDA_ZERO is set when the PDA count goes from non-zero to zero.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002292 */
2293 if ((lp->mode == 1) && (val & (HP100_RX_PDA_ZERO)))
2294 hp100_rxfill(dev);
2295
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002296 /*
2297 * HP100_TX_COMPLETE interrupt occurs when packet transmitted on wire
2298 * is completed
Linus Torvalds1da177e2005-04-16 15:20:36 -07002299 */
2300 if ((lp->mode == 1) && (val & (HP100_TX_COMPLETE)))
2301 hp100_clean_txring(dev);
2302
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002303 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07002304 * MISC_ERROR is set when either the LAN link goes down or a detected
2305 * bus error occurs.
2306 */
2307 if (val & HP100_MISC_ERROR) { /* New for J2585B */
2308#ifdef HP100_DEBUG_IRQ
2309 printk
2310 ("hp100: %s: Misc. Error Interrupt - Check cabling.\n",
2311 dev->name);
2312#endif
2313 if (lp->mode == 1) {
2314 hp100_clean_txring(dev);
2315 hp100_rxfill(dev);
2316 }
2317 hp100_misc_interrupt(dev);
2318 }
2319
2320 spin_unlock(&lp->lock);
2321 hp100_ints_on();
2322 return IRQ_HANDLED;
2323}
2324
2325/*
2326 * some misc functions
2327 */
2328
2329static void hp100_start_interface(struct net_device *dev)
2330{
2331 unsigned long flags;
2332 int ioaddr = dev->base_addr;
2333 struct hp100_private *lp = netdev_priv(dev);
2334
2335#ifdef HP100_DEBUG_B
2336 hp100_outw(0x4220, TRACE);
2337 printk("hp100: %s: hp100_start_interface\n", dev->name);
2338#endif
2339
2340 spin_lock_irqsave(&lp->lock, flags);
2341
2342 /* Ensure the adapter does not want to request an interrupt when */
2343 /* enabling the IRQ line to be active on the bus (i.e. not tri-stated) */
2344 hp100_page(PERFORMANCE);
2345 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
2346 hp100_outw(0xffff, IRQ_STATUS); /* ack all IRQs */
2347 hp100_outw(HP100_FAKE_INT | HP100_INT_EN | HP100_RESET_LB,
2348 OPTION_LSW);
2349 /* Un Tri-state int. TODO: Check if shared interrupts can be realised? */
2350 hp100_outw(HP100_TRI_INT | HP100_RESET_HB, OPTION_LSW);
2351
2352 if (lp->mode == 1) {
2353 /* Make sure BM bit is set... */
2354 hp100_page(HW_MAP);
2355 hp100_orb(HP100_BM_MASTER, BM);
2356 hp100_rxfill(dev);
2357 } else if (lp->mode == 2) {
2358 /* Enable memory mapping. Note: Don't do this when busmaster. */
2359 hp100_outw(HP100_MMAP_DIS | HP100_RESET_HB, OPTION_LSW);
2360 }
2361
2362 hp100_page(PERFORMANCE);
2363 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
2364 hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
2365
2366 /* enable a few interrupts: */
2367 if (lp->mode == 1) { /* busmaster mode */
2368 hp100_outw(HP100_RX_PDL_FILL_COMPL |
2369 HP100_RX_PDA_ZERO | HP100_RX_ERROR |
2370 /* HP100_RX_PACKET | */
2371 /* HP100_RX_EARLY_INT | */ HP100_SET_HB |
2372 /* HP100_TX_PDA_ZERO | */
2373 HP100_TX_COMPLETE |
2374 /* HP100_MISC_ERROR | */
2375 HP100_TX_ERROR | HP100_SET_LB, IRQ_MASK);
2376 } else {
2377 hp100_outw(HP100_RX_PACKET |
2378 HP100_RX_ERROR | HP100_SET_HB |
2379 HP100_TX_ERROR | HP100_SET_LB, IRQ_MASK);
2380 }
2381
2382 /* Note : before hp100_set_multicast_list(), because it will play with
2383 * spinlock itself... Jean II */
2384 spin_unlock_irqrestore(&lp->lock, flags);
2385
2386 /* Enable MAC Tx and RX, set MAC modes, ... */
2387 hp100_set_multicast_list(dev);
2388}
2389
2390static void hp100_stop_interface(struct net_device *dev)
2391{
2392 struct hp100_private *lp = netdev_priv(dev);
2393 int ioaddr = dev->base_addr;
2394 u_int val;
2395
2396#ifdef HP100_DEBUG_B
2397 printk("hp100: %s: hp100_stop_interface\n", dev->name);
2398 hp100_outw(0x4221, TRACE);
2399#endif
2400
2401 if (lp->mode == 1)
2402 hp100_BM_shutdown(dev);
2403 else {
2404 /* Note: MMAP_DIS will be reenabled by start_interface */
2405 hp100_outw(HP100_INT_EN | HP100_RESET_LB |
2406 HP100_TRI_INT | HP100_MMAP_DIS | HP100_SET_HB,
2407 OPTION_LSW);
2408 val = hp100_inw(OPTION_LSW);
2409
2410 hp100_page(MAC_CTRL);
2411 hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1);
2412
2413 if (!(val & HP100_HW_RST))
2414 return; /* If reset, imm. return ... */
2415 /* ... else: busy wait until idle */
2416 for (val = 0; val < 6000; val++)
2417 if ((hp100_inb(MAC_CFG_1) & (HP100_TX_IDLE | HP100_RX_IDLE)) == (HP100_TX_IDLE | HP100_RX_IDLE)) {
2418 hp100_page(PERFORMANCE);
2419 return;
2420 }
2421 printk("hp100: %s: hp100_stop_interface - timeout\n", dev->name);
2422 hp100_page(PERFORMANCE);
2423 }
2424}
2425
2426static void hp100_load_eeprom(struct net_device *dev, u_short probe_ioaddr)
2427{
2428 int i;
2429 int ioaddr = probe_ioaddr > 0 ? probe_ioaddr : dev->base_addr;
2430
2431#ifdef HP100_DEBUG_B
2432 hp100_outw(0x4222, TRACE);
2433#endif
2434
2435 hp100_page(EEPROM_CTRL);
2436 hp100_andw(~HP100_EEPROM_LOAD, EEPROM_CTRL);
2437 hp100_orw(HP100_EEPROM_LOAD, EEPROM_CTRL);
2438 for (i = 0; i < 10000; i++)
2439 if (!(hp100_inb(OPTION_MSW) & HP100_EE_LOAD))
2440 return;
2441 printk("hp100: %s: hp100_load_eeprom - timeout\n", dev->name);
2442}
2443
2444/* Sense connection status.
2445 * return values: LAN_10 - Connected to 10Mbit/s network
2446 * LAN_100 - Connected to 100Mbit/s network
2447 * LAN_ERR - not connected or 100Mbit/s Hub down
2448 */
2449static int hp100_sense_lan(struct net_device *dev)
2450{
2451 int ioaddr = dev->base_addr;
2452 u_short val_VG, val_10;
2453 struct hp100_private *lp = netdev_priv(dev);
2454
2455#ifdef HP100_DEBUG_B
2456 hp100_outw(0x4223, TRACE);
2457#endif
2458
2459 hp100_page(MAC_CTRL);
2460 val_10 = hp100_inb(10_LAN_CFG_1);
2461 val_VG = hp100_inb(VG_LAN_CFG_1);
2462 hp100_page(PERFORMANCE);
2463#ifdef HP100_DEBUG
2464 printk("hp100: %s: sense_lan: val_VG = 0x%04x, val_10 = 0x%04x\n",
2465 dev->name, val_VG, val_10);
2466#endif
2467
2468 if (val_10 & HP100_LINK_BEAT_ST) /* 10Mb connection is active */
2469 return HP100_LAN_10;
2470
2471 if (val_10 & HP100_AUI_ST) { /* have we BNC or AUI onboard? */
2472 /*
2473 * This can be overriden by dos utility, so if this has no effect,
2474 * perhaps you need to download that utility from HP and set card
2475 * back to "auto detect".
2476 */
2477 val_10 |= HP100_AUI_SEL | HP100_LOW_TH;
2478 hp100_page(MAC_CTRL);
2479 hp100_outb(val_10, 10_LAN_CFG_1);
2480 hp100_page(PERFORMANCE);
2481 return HP100_LAN_COAX;
2482 }
2483
2484 /* Those cards don't have a 100 Mbit connector */
2485 if ( !strcmp(lp->id, "HWP1920") ||
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002486 (lp->pci_dev &&
2487 lp->pci_dev->vendor == PCI_VENDOR_ID &&
Linus Torvalds1da177e2005-04-16 15:20:36 -07002488 (lp->pci_dev->device == PCI_DEVICE_ID_HP_J2970A ||
2489 lp->pci_dev->device == PCI_DEVICE_ID_HP_J2973A)))
2490 return HP100_LAN_ERR;
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002491
Linus Torvalds1da177e2005-04-16 15:20:36 -07002492 if (val_VG & HP100_LINK_CABLE_ST) /* Can hear the HUBs tone. */
2493 return HP100_LAN_100;
2494 return HP100_LAN_ERR;
2495}
2496
2497static int hp100_down_vg_link(struct net_device *dev)
2498{
2499 struct hp100_private *lp = netdev_priv(dev);
2500 int ioaddr = dev->base_addr;
2501 unsigned long time;
2502 long savelan, newlan;
2503
2504#ifdef HP100_DEBUG_B
2505 hp100_outw(0x4224, TRACE);
2506 printk("hp100: %s: down_vg_link\n", dev->name);
2507#endif
2508
2509 hp100_page(MAC_CTRL);
2510 time = jiffies + (HZ / 4);
2511 do {
2512 if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST)
2513 break;
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002514 if (!in_interrupt())
2515 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002516 } while (time_after(time, jiffies));
2517
2518 if (time_after_eq(jiffies, time)) /* no signal->no logout */
2519 return 0;
2520
2521 /* Drop the VG Link by clearing the link up cmd and load addr. */
2522
2523 hp100_andb(~(HP100_LOAD_ADDR | HP100_LINK_CMD), VG_LAN_CFG_1);
2524 hp100_orb(HP100_VG_SEL, VG_LAN_CFG_1);
2525
2526 /* Conditionally stall for >250ms on Link-Up Status (to go down) */
2527 time = jiffies + (HZ / 2);
2528 do {
2529 if (!(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST))
2530 break;
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002531 if (!in_interrupt())
2532 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002533 } while (time_after(time, jiffies));
2534
2535#ifdef HP100_DEBUG
2536 if (time_after_eq(jiffies, time))
2537 printk("hp100: %s: down_vg_link: Link does not go down?\n", dev->name);
2538#endif
2539
2540 /* To prevent condition where Rev 1 VG MAC and old hubs do not complete */
2541 /* logout under traffic (even though all the status bits are cleared), */
2542 /* do this workaround to get the Rev 1 MAC in its idle state */
2543 if (lp->chip == HP100_CHIPID_LASSEN) {
2544 /* Reset VG MAC to insure it leaves the logoff state even if */
2545 /* the Hub is still emitting tones */
2546 hp100_andb(~HP100_VG_RESET, VG_LAN_CFG_1);
2547 udelay(1500); /* wait for >1ms */
2548 hp100_orb(HP100_VG_RESET, VG_LAN_CFG_1); /* Release Reset */
2549 udelay(1500);
2550 }
2551
2552 /* New: For lassen, switch to 10 Mbps mac briefly to clear training ACK */
2553 /* to get the VG mac to full reset. This is not req.d with later chips */
2554 /* Note: It will take the between 1 and 2 seconds for the VG mac to be */
2555 /* selected again! This will be left to the connect hub function to */
2556 /* perform if desired. */
2557 if (lp->chip == HP100_CHIPID_LASSEN) {
2558 /* Have to write to 10 and 100VG control registers simultaneously */
2559 savelan = newlan = hp100_inl(10_LAN_CFG_1); /* read 10+100 LAN_CFG regs */
2560 newlan &= ~(HP100_VG_SEL << 16);
2561 newlan |= (HP100_DOT3_MAC) << 8;
2562 hp100_andb(~HP100_AUTO_MODE, MAC_CFG_3); /* Autosel off */
2563 hp100_outl(newlan, 10_LAN_CFG_1);
2564
2565 /* Conditionally stall for 5sec on VG selected. */
2566 time = jiffies + (HZ * 5);
2567 do {
2568 if (!(hp100_inb(MAC_CFG_4) & HP100_MAC_SEL_ST))
2569 break;
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002570 if (!in_interrupt())
2571 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002572 } while (time_after(time, jiffies));
2573
2574 hp100_orb(HP100_AUTO_MODE, MAC_CFG_3); /* Autosel back on */
2575 hp100_outl(savelan, 10_LAN_CFG_1);
2576 }
2577
2578 time = jiffies + (3 * HZ); /* Timeout 3s */
2579 do {
2580 if ((hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST) == 0)
2581 break;
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002582 if (!in_interrupt())
2583 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002584 } while (time_after(time, jiffies));
2585
2586 if (time_before_eq(time, jiffies)) {
2587#ifdef HP100_DEBUG
2588 printk("hp100: %s: down_vg_link: timeout\n", dev->name);
2589#endif
2590 return -EIO;
2591 }
2592
2593 time = jiffies + (2 * HZ); /* This seems to take a while.... */
2594 do {
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002595 if (!in_interrupt())
2596 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002597 } while (time_after(time, jiffies));
2598
2599 return 0;
2600}
2601
2602static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin)
2603{
2604 int ioaddr = dev->base_addr;
2605 struct hp100_private *lp = netdev_priv(dev);
2606 u_short val = 0;
2607 unsigned long time;
2608 int startst;
2609
2610#ifdef HP100_DEBUG_B
2611 hp100_outw(0x4225, TRACE);
2612 printk("hp100: %s: login_to_vg_hub\n", dev->name);
2613#endif
2614
2615 /* Initiate a login sequence iff VG MAC is enabled and either Load Address
2616 * bit is zero or the force relogin flag is set (e.g. due to MAC address or
2617 * promiscuous mode change)
2618 */
2619 hp100_page(MAC_CTRL);
2620 startst = hp100_inb(VG_LAN_CFG_1);
2621 if ((force_relogin == 1) || (hp100_inb(MAC_CFG_4) & HP100_MAC_SEL_ST)) {
2622#ifdef HP100_DEBUG_TRAINING
2623 printk("hp100: %s: Start training\n", dev->name);
2624#endif
2625
2626 /* Ensure VG Reset bit is 1 (i.e., do not reset) */
2627 hp100_orb(HP100_VG_RESET, VG_LAN_CFG_1);
2628
2629 /* If Lassen AND auto-select-mode AND VG tones were sensed on */
2630 /* entry then temporarily put them into force 100Mbit mode */
2631 if ((lp->chip == HP100_CHIPID_LASSEN) && (startst & HP100_LINK_CABLE_ST))
2632 hp100_andb(~HP100_DOT3_MAC, 10_LAN_CFG_2);
2633
2634 /* Drop the VG link by zeroing Link Up Command and Load Address */
2635 hp100_andb(~(HP100_LINK_CMD /* |HP100_LOAD_ADDR */ ), VG_LAN_CFG_1);
2636
2637#ifdef HP100_DEBUG_TRAINING
2638 printk("hp100: %s: Bring down the link\n", dev->name);
2639#endif
2640
2641 /* Wait for link to drop */
2642 time = jiffies + (HZ / 10);
2643 do {
2644 if (~(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST))
2645 break;
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002646 if (!in_interrupt())
2647 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002648 } while (time_after(time, jiffies));
2649
2650 /* Start an addressed training and optionally request promiscuous port */
2651 if ((dev->flags) & IFF_PROMISC) {
2652 hp100_orb(HP100_PROM_MODE, VG_LAN_CFG_2);
2653 if (lp->chip == HP100_CHIPID_LASSEN)
2654 hp100_orw(HP100_MACRQ_PROMSC, TRAIN_REQUEST);
2655 } else {
2656 hp100_andb(~HP100_PROM_MODE, VG_LAN_CFG_2);
2657 /* For ETR parts we need to reset the prom. bit in the training
2658 * register, otherwise promiscious mode won't be disabled.
2659 */
2660 if (lp->chip == HP100_CHIPID_LASSEN) {
2661 hp100_andw(~HP100_MACRQ_PROMSC, TRAIN_REQUEST);
2662 }
2663 }
2664
2665 /* With ETR parts, frame format request bits can be set. */
2666 if (lp->chip == HP100_CHIPID_LASSEN)
2667 hp100_orb(HP100_MACRQ_FRAMEFMT_EITHER, TRAIN_REQUEST);
2668
2669 hp100_orb(HP100_LINK_CMD | HP100_LOAD_ADDR | HP100_VG_RESET, VG_LAN_CFG_1);
2670
2671 /* Note: Next wait could be omitted for Hood and earlier chips under */
2672 /* certain circumstances */
2673 /* TODO: check if hood/earlier and skip wait. */
2674
2675 /* Wait for either short timeout for VG tones or long for login */
2676 /* Wait for the card hardware to signalise link cable status ok... */
2677 hp100_page(MAC_CTRL);
2678 time = jiffies + (1 * HZ); /* 1 sec timeout for cable st */
2679 do {
2680 if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST)
2681 break;
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002682 if (!in_interrupt())
2683 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002684 } while (time_before(jiffies, time));
2685
2686 if (time_after_eq(jiffies, time)) {
2687#ifdef HP100_DEBUG_TRAINING
2688 printk("hp100: %s: Link cable status not ok? Training aborted.\n", dev->name);
2689#endif
2690 } else {
2691#ifdef HP100_DEBUG_TRAINING
2692 printk
2693 ("hp100: %s: HUB tones detected. Trying to train.\n",
2694 dev->name);
2695#endif
2696
2697 time = jiffies + (2 * HZ); /* again a timeout */
2698 do {
2699 val = hp100_inb(VG_LAN_CFG_1);
2700 if ((val & (HP100_LINK_UP_ST))) {
2701#ifdef HP100_DEBUG_TRAINING
2702 printk("hp100: %s: Passed training.\n", dev->name);
2703#endif
2704 break;
2705 }
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002706 if (!in_interrupt())
2707 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002708 } while (time_after(time, jiffies));
2709 }
2710
2711 /* If LINK_UP_ST is set, then we are logged into the hub. */
2712 if (time_before_eq(jiffies, time) && (val & HP100_LINK_UP_ST)) {
2713#ifdef HP100_DEBUG_TRAINING
2714 printk("hp100: %s: Successfully logged into the HUB.\n", dev->name);
2715 if (lp->chip == HP100_CHIPID_LASSEN) {
2716 val = hp100_inw(TRAIN_ALLOW);
2717 printk("hp100: %s: Card supports 100VG MAC Version \"%s\" ",
2718 dev->name, (hp100_inw(TRAIN_REQUEST) & HP100_CARD_MACVER) ? "802.12" : "Pre");
2719 printk("Driver will use MAC Version \"%s\"\n", (val & HP100_HUB_MACVER) ? "802.12" : "Pre");
2720 printk("hp100: %s: Frame format is %s.\n", dev->name, (val & HP100_MALLOW_FRAMEFMT) ? "802.5" : "802.3");
2721 }
2722#endif
2723 } else {
2724 /* If LINK_UP_ST is not set, login was not successful */
2725 printk("hp100: %s: Problem logging into the HUB.\n", dev->name);
2726 if (lp->chip == HP100_CHIPID_LASSEN) {
2727 /* Check allowed Register to find out why there is a problem. */
2728 val = hp100_inw(TRAIN_ALLOW); /* won't work on non-ETR card */
2729#ifdef HP100_DEBUG_TRAINING
2730 printk("hp100: %s: MAC Configuration requested: 0x%04x, HUB allowed: 0x%04x\n", dev->name, hp100_inw(TRAIN_REQUEST), val);
2731#endif
2732 if (val & HP100_MALLOW_ACCDENIED)
2733 printk("hp100: %s: HUB access denied.\n", dev->name);
2734 if (val & HP100_MALLOW_CONFIGURE)
2735 printk("hp100: %s: MAC Configuration is incompatible with the Network.\n", dev->name);
2736 if (val & HP100_MALLOW_DUPADDR)
2737 printk("hp100: %s: Duplicate MAC Address on the Network.\n", dev->name);
2738 }
2739 }
2740
2741 /* If we have put the chip into forced 100 Mbit mode earlier, go back */
2742 /* to auto-select mode */
2743
2744 if ((lp->chip == HP100_CHIPID_LASSEN) && (startst & HP100_LINK_CABLE_ST)) {
2745 hp100_page(MAC_CTRL);
2746 hp100_orb(HP100_DOT3_MAC, 10_LAN_CFG_2);
2747 }
2748
2749 val = hp100_inb(VG_LAN_CFG_1);
2750
2751 /* Clear the MISC_ERROR Interrupt, which might be generated when doing the relogin */
2752 hp100_page(PERFORMANCE);
2753 hp100_outw(HP100_MISC_ERROR, IRQ_STATUS);
2754
2755 if (val & HP100_LINK_UP_ST)
2756 return (0); /* login was ok */
2757 else {
2758 printk("hp100: %s: Training failed.\n", dev->name);
2759 hp100_down_vg_link(dev);
2760 return -EIO;
2761 }
2762 }
2763 /* no forced relogin & already link there->no training. */
2764 return -EIO;
2765}
2766
2767static void hp100_cascade_reset(struct net_device *dev, u_short enable)
2768{
2769 int ioaddr = dev->base_addr;
2770 struct hp100_private *lp = netdev_priv(dev);
2771
2772#ifdef HP100_DEBUG_B
2773 hp100_outw(0x4226, TRACE);
2774 printk("hp100: %s: cascade_reset\n", dev->name);
2775#endif
2776
2777 if (enable) {
2778 hp100_outw(HP100_HW_RST | HP100_RESET_LB, OPTION_LSW);
2779 if (lp->chip == HP100_CHIPID_LASSEN) {
2780 /* Lassen requires a PCI transmit fifo reset */
2781 hp100_page(HW_MAP);
2782 hp100_andb(~HP100_PCI_RESET, PCICTRL2);
2783 hp100_orb(HP100_PCI_RESET, PCICTRL2);
2784 /* Wait for min. 300 ns */
2785 /* we can't use jiffies here, because it may be */
2786 /* that we have disabled the timer... */
2787 udelay(400);
2788 hp100_andb(~HP100_PCI_RESET, PCICTRL2);
2789 hp100_page(PERFORMANCE);
2790 }
2791 } else { /* bring out of reset */
2792 hp100_outw(HP100_HW_RST | HP100_SET_LB, OPTION_LSW);
2793 udelay(400);
2794 hp100_page(PERFORMANCE);
2795 }
2796}
2797
2798#ifdef HP100_DEBUG
2799void hp100_RegisterDump(struct net_device *dev)
2800{
2801 int ioaddr = dev->base_addr;
2802 int Page;
2803 int Register;
2804
2805 /* Dump common registers */
2806 printk("hp100: %s: Cascade Register Dump\n", dev->name);
2807 printk("hardware id #1: 0x%.2x\n", hp100_inb(HW_ID));
2808 printk("hardware id #2/paging: 0x%.2x\n", hp100_inb(PAGING));
2809 printk("option #1: 0x%.4x\n", hp100_inw(OPTION_LSW));
2810 printk("option #2: 0x%.4x\n", hp100_inw(OPTION_MSW));
2811
2812 /* Dump paged registers */
2813 for (Page = 0; Page < 8; Page++) {
2814 /* Dump registers */
2815 printk("page: 0x%.2x\n", Page);
2816 outw(Page, ioaddr + 0x02);
2817 for (Register = 0x8; Register < 0x22; Register += 2) {
2818 /* Display Register contents except data port */
2819 if (((Register != 0x10) && (Register != 0x12)) || (Page > 0)) {
2820 printk("0x%.2x = 0x%.4x\n", Register, inw(ioaddr + Register));
2821 }
2822 }
2823 }
2824 hp100_page(PERFORMANCE);
2825}
2826#endif
2827
2828
2829static void cleanup_dev(struct net_device *d)
2830{
2831 struct hp100_private *p = netdev_priv(d);
2832
2833 unregister_netdev(d);
2834 release_region(d->base_addr, HP100_REGION_SIZE);
2835
2836 if (p->mode == 1) /* busmaster */
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002837 pci_free_consistent(p->pci_dev, MAX_RINGSIZE + 0x0f,
2838 p->page_vaddr_algn,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002839 virt_to_whatever(d, p->page_vaddr_algn));
2840 if (p->mem_ptr_virt)
2841 iounmap(p->mem_ptr_virt);
2842
2843 free_netdev(d);
2844}
2845
2846#ifdef CONFIG_EISA
2847static int __init hp100_eisa_probe (struct device *gendev)
2848{
2849 struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private));
2850 struct eisa_device *edev = to_eisa_device(gendev);
2851 int err;
2852
2853 if (!dev)
2854 return -ENOMEM;
2855
Linus Torvalds1da177e2005-04-16 15:20:36 -07002856 SET_NETDEV_DEV(dev, &edev->dev);
2857
2858 err = hp100_probe1(dev, edev->base_addr + 0xC38, HP100_BUS_EISA, NULL);
2859 if (err)
2860 goto out1;
2861
Linus Torvalds1da177e2005-04-16 15:20:36 -07002862#ifdef HP100_DEBUG
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002863 printk("hp100: %s: EISA adapter found at 0x%x\n", dev->name,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002864 dev->base_addr);
2865#endif
Greg Kroah-Hartman1aec5bd2009-04-30 12:19:31 +00002866 dev_set_drvdata(gendev, dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002867 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002868 out1:
2869 free_netdev(dev);
2870 return err;
2871}
2872
2873static int __devexit hp100_eisa_remove (struct device *gendev)
2874{
Greg Kroah-Hartman1aec5bd2009-04-30 12:19:31 +00002875 struct net_device *dev = dev_get_drvdata(gendev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002876 cleanup_dev(dev);
2877 return 0;
2878}
2879
2880static struct eisa_driver hp100_eisa_driver = {
2881 .id_table = hp100_eisa_tbl,
2882 .driver = {
2883 .name = "hp100",
2884 .probe = hp100_eisa_probe,
2885 .remove = __devexit_p (hp100_eisa_remove),
2886 }
2887};
2888#endif
2889
2890#ifdef CONFIG_PCI
2891static int __devinit hp100_pci_probe (struct pci_dev *pdev,
2892 const struct pci_device_id *ent)
2893{
2894 struct net_device *dev;
2895 int ioaddr;
2896 u_short pci_command;
2897 int err;
2898
2899 if (pci_enable_device(pdev))
2900 return -ENODEV;
2901
2902 dev = alloc_etherdev(sizeof(struct hp100_private));
2903 if (!dev) {
2904 err = -ENOMEM;
2905 goto out0;
2906 }
2907
Linus Torvalds1da177e2005-04-16 15:20:36 -07002908 SET_NETDEV_DEV(dev, &pdev->dev);
2909
2910 pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
2911 if (!(pci_command & PCI_COMMAND_IO)) {
2912#ifdef HP100_DEBUG
2913 printk("hp100: %s: PCI I/O Bit has not been set. Setting...\n", dev->name);
2914#endif
2915 pci_command |= PCI_COMMAND_IO;
2916 pci_write_config_word(pdev, PCI_COMMAND, pci_command);
2917 }
2918
2919 if (!(pci_command & PCI_COMMAND_MASTER)) {
2920#ifdef HP100_DEBUG
2921 printk("hp100: %s: PCI Master Bit has not been set. Setting...\n", dev->name);
2922#endif
2923 pci_command |= PCI_COMMAND_MASTER;
2924 pci_write_config_word(pdev, PCI_COMMAND, pci_command);
2925 }
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002926
Linus Torvalds1da177e2005-04-16 15:20:36 -07002927 ioaddr = pci_resource_start(pdev, 0);
2928 err = hp100_probe1(dev, ioaddr, HP100_BUS_PCI, pdev);
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002929 if (err)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002930 goto out1;
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002931
Linus Torvalds1da177e2005-04-16 15:20:36 -07002932#ifdef HP100_DEBUG
2933 printk("hp100: %s: PCI adapter found at 0x%x\n", dev->name, ioaddr);
2934#endif
2935 pci_set_drvdata(pdev, dev);
2936 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002937 out1:
2938 free_netdev(dev);
2939 out0:
2940 pci_disable_device(pdev);
2941 return err;
2942}
2943
2944static void __devexit hp100_pci_remove (struct pci_dev *pdev)
2945{
2946 struct net_device *dev = pci_get_drvdata(pdev);
2947
2948 cleanup_dev(dev);
2949 pci_disable_device(pdev);
2950}
2951
2952
2953static struct pci_driver hp100_pci_driver = {
2954 .name = "hp100",
2955 .id_table = hp100_pci_tbl,
2956 .probe = hp100_pci_probe,
2957 .remove = __devexit_p(hp100_pci_remove),
2958};
2959#endif
2960
2961/*
2962 * module section
2963 */
2964
2965MODULE_LICENSE("GPL");
Jaroslav Kyselac1017a42007-10-15 09:50:19 +02002966MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>, "
Linus Torvalds1da177e2005-04-16 15:20:36 -07002967 "Siegfried \"Frieder\" Loeffler (dg1sek) <floeff@mathematik.uni-stuttgart.de>");
2968MODULE_DESCRIPTION("HP CASCADE Architecture Driver for 100VG-AnyLan Network Adapters");
2969
2970/*
2971 * Note: to register three isa devices, use:
2972 * option hp100 hp100_port=0,0,0
2973 * to register one card at io 0x280 as eth239, use:
2974 * option hp100 hp100_port=0x280
2975 */
2976#if defined(MODULE) && defined(CONFIG_ISA)
2977#define HP100_DEVICES 5
2978/* Parameters set by insmod */
2979static int hp100_port[HP100_DEVICES] = { 0, [1 ... (HP100_DEVICES-1)] = -1 };
2980module_param_array(hp100_port, int, NULL, 0);
2981
2982/* List of devices */
2983static struct net_device *hp100_devlist[HP100_DEVICES];
2984
2985static int __init hp100_isa_init(void)
2986{
2987 struct net_device *dev;
2988 int i, err, cards = 0;
2989
2990 /* Don't autoprobe ISA bus */
2991 if (hp100_port[0] == 0)
2992 return -ENODEV;
2993
2994 /* Loop on all possible base addresses */
2995 for (i = 0; i < HP100_DEVICES && hp100_port[i] != -1; ++i) {
2996 dev = alloc_etherdev(sizeof(struct hp100_private));
2997 if (!dev) {
2998 printk(KERN_WARNING "hp100: no memory for network device\n");
2999 while (cards > 0)
3000 cleanup_dev(hp100_devlist[--cards]);
3001
3002 return -ENOMEM;
3003 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07003004
3005 err = hp100_isa_probe(dev, hp100_port[i]);
b1fc5502005-05-12 20:11:55 -04003006 if (!err)
3007 hp100_devlist[cards++] = dev;
3008 else
Linus Torvalds1da177e2005-04-16 15:20:36 -07003009 free_netdev(dev);
3010 }
3011
3012 return cards > 0 ? 0 : -ENODEV;
3013}
3014
Sam Ravnborgc79d9c92007-06-01 00:47:14 -07003015static void hp100_isa_cleanup(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003016{
3017 int i;
3018
3019 for (i = 0; i < HP100_DEVICES; i++) {
3020 struct net_device *dev = hp100_devlist[i];
3021 if (dev)
3022 cleanup_dev(dev);
3023 }
3024}
3025#else
3026#define hp100_isa_init() (0)
3027#define hp100_isa_cleanup() do { } while(0)
3028#endif
3029
3030static int __init hp100_module_init(void)
3031{
3032 int err;
3033
3034 err = hp100_isa_init();
3035 if (err && err != -ENODEV)
3036 goto out;
3037#ifdef CONFIG_EISA
3038 err = eisa_driver_register(&hp100_eisa_driver);
Jeff Garzik6aa20a22006-09-13 13:24:59 -04003039 if (err && err != -ENODEV)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003040 goto out2;
3041#endif
3042#ifdef CONFIG_PCI
Richard Knutsson7e3e8b02007-02-05 16:29:48 -08003043 err = pci_register_driver(&hp100_pci_driver);
Jeff Garzik6aa20a22006-09-13 13:24:59 -04003044 if (err && err != -ENODEV)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003045 goto out3;
3046#endif
3047 out:
3048 return err;
3049 out3:
3050#ifdef CONFIG_EISA
3051 eisa_driver_unregister (&hp100_eisa_driver);
3052 out2:
3053#endif
3054 hp100_isa_cleanup();
3055 goto out;
3056}
3057
3058
3059static void __exit hp100_module_exit(void)
3060{
3061 hp100_isa_cleanup();
3062#ifdef CONFIG_EISA
3063 eisa_driver_unregister (&hp100_eisa_driver);
3064#endif
3065#ifdef CONFIG_PCI
3066 pci_unregister_driver (&hp100_pci_driver);
3067#endif
3068}
3069
3070module_init(hp100_module_init)
3071module_exit(hp100_module_exit)