blob: 0980e6ad335b7fb2aa14ccc3dcbfd525025d56a5 [file] [log] [blame]
Li Yang98658532006-10-03 23:10:46 -05001/*
2 * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
3 *
4 * Authors: Shlomi Gridish <gridish@freescale.com>
5 * Li Yang <leoli@freescale.com>
6 *
7 * Description:
8 * Internal header file for UCC SLOW unit routines.
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 */
15#ifndef __UCC_SLOW_H__
16#define __UCC_SLOW_H__
17
18#include <linux/kernel.h>
19
20#include <asm/immap_qe.h>
21#include <asm/qe.h>
22
23#include "ucc.h"
24
25/* transmit BD's status */
26#define T_R 0x80000000 /* ready bit */
27#define T_PAD 0x40000000 /* add pads to short frames */
28#define T_W 0x20000000 /* wrap bit */
29#define T_I 0x10000000 /* interrupt on completion */
30#define T_L 0x08000000 /* last */
31
32#define T_A 0x04000000 /* Address - the data transmitted as address
33 chars */
34#define T_TC 0x04000000 /* transmit CRC */
35#define T_CM 0x02000000 /* continuous mode */
36#define T_DEF 0x02000000 /* collision on previous attempt to transmit */
37#define T_P 0x01000000 /* Preamble - send Preamble sequence before
38 data */
39#define T_HB 0x01000000 /* heartbeat */
40#define T_NS 0x00800000 /* No Stop */
41#define T_LC 0x00800000 /* late collision */
42#define T_RL 0x00400000 /* retransmission limit */
43#define T_UN 0x00020000 /* underrun */
44#define T_CT 0x00010000 /* CTS lost */
45#define T_CSL 0x00010000 /* carrier sense lost */
46#define T_RC 0x003c0000 /* retry count */
47
48/* Receive BD's status */
49#define R_E 0x80000000 /* buffer empty */
50#define R_W 0x20000000 /* wrap bit */
51#define R_I 0x10000000 /* interrupt on reception */
52#define R_L 0x08000000 /* last */
53#define R_C 0x08000000 /* the last byte in this buffer is a cntl
54 char */
55#define R_F 0x04000000 /* first */
56#define R_A 0x04000000 /* the first byte in this buffer is address
57 byte */
58#define R_CM 0x02000000 /* continuous mode */
59#define R_ID 0x01000000 /* buffer close on reception of idles */
60#define R_M 0x01000000 /* Frame received because of promiscuous
61 mode */
62#define R_AM 0x00800000 /* Address match */
63#define R_DE 0x00800000 /* Address match */
64#define R_LG 0x00200000 /* Break received */
65#define R_BR 0x00200000 /* Frame length violation */
66#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
67#define R_FR 0x00100000 /* Framing Error (no stop bit) character
68 received */
69#define R_PR 0x00080000 /* Parity Error character received */
70#define R_AB 0x00080000 /* Frame Aborted */
71#define R_SH 0x00080000 /* frame is too short */
72#define R_CR 0x00040000 /* CRC Error */
73#define R_OV 0x00020000 /* Overrun */
74#define R_CD 0x00010000 /* CD lost */
75#define R_CL 0x00010000 /* this frame is closed because of a
76 collision */
77
78/* Rx Data buffer must be 4 bytes aligned in most cases.*/
79#define UCC_SLOW_RX_ALIGN 4
80#define UCC_SLOW_MRBLR_ALIGNMENT 4
81#define UCC_SLOW_PRAM_SIZE 0x100
82#define ALIGNMENT_OF_UCC_SLOW_PRAM 64
83
84/* UCC Slow Channel Protocol Mode */
85enum ucc_slow_channel_protocol_mode {
86 UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
87 UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
88 UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
89};
90
91/* UCC Slow Transparent Transmit CRC (TCRC) */
92enum ucc_slow_transparent_tcrc {
93 /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */
94 UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
95 /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */
96 UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
97 /* 32-bit CCITT CRC (Ethernet and HDLC) */
98 UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
99};
100
101/* UCC Slow oversampling rate for transmitter (TDCR) */
102enum ucc_slow_tx_oversampling_rate {
103 /* 1x clock mode */
104 UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
105 /* 8x clock mode */
106 UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
107 /* 16x clock mode */
108 UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
109 /* 32x clock mode */
110 UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
111};
112
113/* UCC Slow Oversampling rate for receiver (RDCR)
114*/
115enum ucc_slow_rx_oversampling_rate {
116 /* 1x clock mode */
117 UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
118 /* 8x clock mode */
119 UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
120 /* 16x clock mode */
121 UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
122 /* 32x clock mode */
123 UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
124};
125
126/* UCC Slow Transmitter encoding method (TENC)
127*/
128enum ucc_slow_tx_encoding_method {
129 UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
130 UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
131};
132
133/* UCC Slow Receiver decoding method (RENC)
134*/
135enum ucc_slow_rx_decoding_method {
136 UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
137 UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
138};
139
140/* UCC Slow Diagnostic mode (DIAG)
141*/
142enum ucc_slow_diag_mode {
143 UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
144 UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
145 UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
146 UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
147};
148
149struct ucc_slow_info {
150 int ucc_num;
Timur Tabi6b0b5942007-10-03 11:34:59 -0500151 int protocol; /* QE_CR_PROTOCOL_xxx */
Li Yang98658532006-10-03 23:10:46 -0500152 enum qe_clock rx_clock;
153 enum qe_clock tx_clock;
Timur Tabi6b0b5942007-10-03 11:34:59 -0500154 phys_addr_t regs;
Li Yang98658532006-10-03 23:10:46 -0500155 int irq;
156 u16 uccm_mask;
157 int data_mem_part;
158 int init_tx;
159 int init_rx;
160 u32 tx_bd_ring_len;
161 u32 rx_bd_ring_len;
162 int rx_interrupts;
163 int brkpt_support;
164 int grant_support;
165 int tsa;
166 int cdp;
167 int cds;
168 int ctsp;
169 int ctss;
170 int rinv;
171 int tinv;
172 int rtsm;
173 int rfw;
174 int tci;
175 int tend;
176 int tfl;
177 int txsy;
178 u16 max_rx_buf_length;
179 enum ucc_slow_transparent_tcrc tcrc;
180 enum ucc_slow_channel_protocol_mode mode;
181 enum ucc_slow_diag_mode diag;
182 enum ucc_slow_tx_oversampling_rate tdcr;
183 enum ucc_slow_rx_oversampling_rate rdcr;
184 enum ucc_slow_tx_encoding_method tenc;
185 enum ucc_slow_rx_decoding_method renc;
186};
187
188struct ucc_slow_private {
189 struct ucc_slow_info *us_info;
Timur Tabi6b0b5942007-10-03 11:34:59 -0500190 struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
Li Yang98658532006-10-03 23:10:46 -0500191 struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */
192 u32 us_pram_offset;
193 int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
194 int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
195 int stopped_tx; /* Whether channel has been stopped for Tx
196 (STOP_TX, etc.) */
197 int stopped_rx; /* Whether channel has been stopped for Rx */
198 struct list_head confQ; /* frames passed to chip waiting for tx */
199 u32 first_tx_bd_mask; /* mask is used in Tx routine to save status
200 and length for first BD in a frame */
201 u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
202 u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
Timur Tabi5af68af2007-02-16 22:31:21 -0600203 struct qe_bd *confBd; /* next BD for confirm after Tx */
204 struct qe_bd *tx_bd; /* next BD for new Tx request */
205 struct qe_bd *rx_bd; /* next BD to collect after Rx */
Li Yang98658532006-10-03 23:10:46 -0500206 void *p_rx_frame; /* accumulating receive frame */
207 u16 *p_ucce; /* a pointer to the event register in memory.
208 */
209 u16 *p_uccm; /* a pointer to the mask register in memory */
210 u16 saved_uccm; /* a saved mask for the RX Interrupt bits */
211#ifdef STATISTICS
212 u32 tx_frames; /* Transmitted frames counters */
213 u32 rx_frames; /* Received frames counters (only frames
214 passed to application) */
215 u32 rx_discarded; /* Discarded frames counters (frames that
216 were discarded by the driver due to
217 errors) */
218#endif /* STATISTICS */
219};
220
221/* ucc_slow_init
222 * Initializes Slow UCC according to provided parameters.
223 *
224 * us_info - (In) pointer to the slow UCC info structure.
225 * uccs_ret - (Out) pointer to the slow UCC structure.
226 */
227int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
228
229/* ucc_slow_free
230 * Frees all resources for slow UCC.
231 *
232 * uccs - (In) pointer to the slow UCC structure.
233 */
234void ucc_slow_free(struct ucc_slow_private * uccs);
235
236/* ucc_slow_enable
237 * Enables a fast UCC port.
238 * This routine enables Tx and/or Rx through the General UCC Mode Register.
239 *
240 * uccs - (In) pointer to the slow UCC structure.
241 * mode - (In) TX, RX, or both.
242 */
243void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
244
245/* ucc_slow_disable
246 * Disables a fast UCC port.
247 * This routine disables Tx and/or Rx through the General UCC Mode Register.
248 *
249 * uccs - (In) pointer to the slow UCC structure.
250 * mode - (In) TX, RX, or both.
251 */
252void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
253
254/* ucc_slow_poll_transmitter_now
255 * Immediately forces a poll of the transmitter for data to be sent.
256 * Typically, the hardware performs a periodic poll for data that the
257 * transmit routine has set up to be transmitted. In cases where
258 * this polling cycle is not soon enough, this optional routine can
259 * be invoked to force a poll right away, instead. Proper use for
260 * each transmission for which this functionality is desired is to
261 * call the transmit routine and then this routine right after.
262 *
263 * uccs - (In) pointer to the slow UCC structure.
264 */
265void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
266
267/* ucc_slow_graceful_stop_tx
268 * Smoothly stops transmission on a specified slow UCC.
269 *
270 * uccs - (In) pointer to the slow UCC structure.
271 */
272void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
273
274/* ucc_slow_stop_tx
275 * Stops transmission on a specified slow UCC.
276 *
277 * uccs - (In) pointer to the slow UCC structure.
278 */
279void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
280
Timur Tabi6b0b5942007-10-03 11:34:59 -0500281/* ucc_slow_restart_tx
Li Yang98658532006-10-03 23:10:46 -0500282 * Restarts transmitting on a specified slow UCC.
283 *
284 * uccs - (In) pointer to the slow UCC structure.
285 */
Timur Tabi6b0b5942007-10-03 11:34:59 -0500286void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
Li Yang98658532006-10-03 23:10:46 -0500287
288u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
289
290#endif /* __UCC_SLOW_H__ */