blob: 758435f8a6f8cb32f4e7413ad0eeafa7d4b74239 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Video configuration
3#
4
5menu "Graphics support"
Martin Schwidefskye25df122007-05-10 15:45:57 +02006 depends on HAS_IOMEM
Linus Torvalds1da177e2005-04-16 15:20:36 -07007
Randy Dunlap179b0252007-10-16 01:29:39 -07008source "drivers/char/agp/Kconfig"
9
10source "drivers/char/drm/Kconfig"
Antonino A. Daplasba707102006-06-26 00:26:37 -070011
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -070012config VGASTATE
13 tristate
14 default n
15
Luming Yu23b0f012007-05-09 21:07:05 +080016config VIDEO_OUTPUT_CONTROL
17 tristate "Lowlevel video output switch controls"
Luming Yu23b0f012007-05-09 21:07:05 +080018 help
19 This framework adds support for low-level control of the video
20 output switch.
21
Randy Dunlap179b0252007-10-16 01:29:39 -070022menuconfig FB
Linus Torvalds1da177e2005-04-16 15:20:36 -070023 tristate "Support for frame buffer devices"
24 ---help---
25 The frame buffer device provides an abstraction for the graphics
26 hardware. It represents the frame buffer of some video hardware and
27 allows application software to access the graphics hardware through
28 a well-defined interface, so the software doesn't need to know
29 anything about the low-level (hardware register) stuff.
30
31 Frame buffer devices work identically across the different
32 architectures supported by Linux and make the implementation of
33 application programs easier and more portable; at this point, an X
34 server exists which uses the frame buffer device exclusively.
35 On several non-X86 architectures, the frame buffer device is the
36 only way to use the graphics hardware.
37
38 The device is accessed through special device nodes, usually located
39 in the /dev directory, i.e. /dev/fb*.
40
41 You need an utility program called fbset to make full use of frame
42 buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
43 and the Framebuffer-HOWTO at
44 <http://www.tahallah.demon.co.uk/programming/prog.html> for more
45 information.
46
47 Say Y here and to the driver for your graphics board below if you
48 are compiling a kernel for a non-x86 architecture.
49
50 If you are compiling for the x86 architecture, you can say Y if you
51 want to play with it, but it is not essential. Please note that
52 running graphical applications that directly touch the hardware
53 (e.g. an accelerated X server) and that are not frame buffer
54 device-aware may cause unexpected results. If unsure, say N.
55
James Simmonse0e34ef72007-02-10 14:15:43 +000056config FIRMWARE_EDID
57 bool "Enable firmware EDID"
58 depends on FB
59 default n
60 ---help---
61 This enables access to the EDID transferred from the firmware.
62 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
63 transfers do not work for your driver and if you are using
64 nvidiafb, i810fb or savagefb.
65
66 In general, choosing Y for this option is safe. If you
67 experience extremely long delays while booting before you get
68 something on your display, try setting this to N. Matrox cards in
69 combination with certain motherboards and monitors are known to
70 suffer from this problem.
71
Dennis Munsiefc5891c2006-10-03 01:14:42 -070072config FB_DDC
73 tristate
James Simmonse0e34ef72007-02-10 14:15:43 +000074 depends on FB
75 select I2C_ALGOBIT
76 select I2C
Dennis Munsiefc5891c2006-10-03 01:14:42 -070077 default n
78
Linus Torvalds1da177e2005-04-16 15:20:36 -070079config FB_CFB_FILLRECT
80 tristate
81 depends on FB
82 default n
83 ---help---
84 Include the cfb_fillrect function for generic software rectangle
85 filling. This is used by drivers that don't provide their own
86 (accelerated) version.
87
88config FB_CFB_COPYAREA
89 tristate
90 depends on FB
91 default n
92 ---help---
93 Include the cfb_copyarea function for generic software area copying.
94 This is used by drivers that don't provide their own (accelerated)
95 version.
96
97config FB_CFB_IMAGEBLIT
98 tristate
99 depends on FB
100 default n
101 ---help---
102 Include the cfb_imageblit function for generic software image
103 blitting. This is used by drivers that don't provide their own
104 (accelerated) version.
105
Pavel Pisa779121e2007-10-16 01:29:21 -0700106config FB_CFB_REV_PIXELS_IN_BYTE
107 bool
108 depends on FB
109 default n
110 ---help---
111 Allow generic frame-buffer functions to work on displays with 1, 2
112 and 4 bits per pixel depths which has opposite order of pixels in
113 byte order to bytes in long order.
114
Antonino A. Daplas68648ed2007-05-08 00:38:57 -0700115config FB_SYS_FILLRECT
116 tristate
117 depends on FB
118 default n
119 ---help---
120 Include the sys_fillrect function for generic software rectangle
121 filling. This is used by drivers that don't provide their own
122 (accelerated) version and the framebuffer is in system RAM.
123
124config FB_SYS_COPYAREA
125 tristate
126 depends on FB
127 default n
128 ---help---
129 Include the sys_copyarea function for generic software area copying.
130 This is used by drivers that don't provide their own (accelerated)
131 version and the framebuffer is in system RAM.
132
133config FB_SYS_IMAGEBLIT
134 tristate
135 depends on FB
136 default n
137 ---help---
138 Include the sys_imageblit function for generic software image
139 blitting. This is used by drivers that don't provide their own
140 (accelerated) version and the framebuffer is in system RAM.
141
Antonino A. Daplas09aaf262007-05-08 00:39:03 -0700142config FB_SYS_FOPS
143 tristate
144 depends on FB
145 default n
146
Jaya Kumar60b59be2007-05-08 00:37:37 -0700147config FB_DEFERRED_IO
148 bool
149 depends on FB
150 default y
151
Ondrej Zajiceka2684222007-02-12 00:54:49 -0800152config FB_SVGALIB
153 tristate
154 depends on FB
155 default n
156 ---help---
157 Common utility functions useful to fbdev drivers of VGA-based
158 cards.
159
Linus Torvalds1da177e2005-04-16 15:20:36 -0700160config FB_MACMODES
161 tristate
162 depends on FB
163 default n
164
Michael Hanselmann5474c122006-06-25 05:47:08 -0700165config FB_BACKLIGHT
Michael Hanselmann4b755992006-07-30 03:04:19 -0700166 bool
167 depends on FB
168 select BACKLIGHT_LCD_SUPPORT
169 select BACKLIGHT_CLASS_DEVICE
170 default n
Michael Hanselmann5474c122006-06-25 05:47:08 -0700171
Linus Torvalds1da177e2005-04-16 15:20:36 -0700172config FB_MODE_HELPERS
173 bool "Enable Video Mode Handling Helpers"
174 depends on FB
175 default n
176 ---help---
177 This enables functions for handling video modes using the
178 Generalized Timing Formula and the EDID parser. A few drivers rely
179 on this feature such as the radeonfb, rivafb, and the i810fb. If
180 your driver does not take advantage of this feature, choosing Y will
181 just increase the kernel size by about 5K.
182
183config FB_TILEBLITTING
184 bool "Enable Tile Blitting Support"
185 depends on FB
186 default n
187 ---help---
188 This enables tile blitting. Tile blitting is a drawing technique
189 where the screen is divided into rectangular sections (tiles), whereas
190 the standard blitting divides the screen into pixels. Because the
191 default drawing element is a tile, drawing functions will be passed
192 parameters in terms of number of tiles instead of number of pixels.
193 For example, to draw a single character, instead of using bitmaps,
194 an index to an array of bitmaps will be used. To clear or move a
195 rectangular section of a screen, the rectangle will be described in
196 terms of number of tiles in the x- and y-axis.
197
198 This is particularly important to one driver, matroxfb. If
199 unsure, say N.
200
Miguel Ojeda10ccaf42007-04-23 14:41:09 -0700201comment "Frame buffer hardware drivers"
James Simmonse0e34ef72007-02-10 14:15:43 +0000202 depends on FB
203
Linus Torvalds1da177e2005-04-16 15:20:36 -0700204config FB_CIRRUS
205 tristate "Cirrus Logic support"
206 depends on FB && (ZORRO || PCI)
207 select FB_CFB_FILLRECT
208 select FB_CFB_COPYAREA
209 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700210 ---help---
211 This enables support for Cirrus Logic GD542x/543x based boards on
212 Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
213
214 If you have a PCI-based system, this enables support for these
215 chips: GD-543x, GD-544x, GD-5480.
216
217 Please read the file <file:Documentation/fb/cirrusfb.txt>.
218
219 Say N unless you have such a graphics board or plan to get one
220 before you next recompile the kernel.
221
222config FB_PM2
223 tristate "Permedia2 support"
224 depends on FB && ((AMIGA && BROKEN) || PCI)
225 select FB_CFB_FILLRECT
226 select FB_CFB_COPYAREA
227 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700228 help
229 This is the frame buffer device driver for the Permedia2 AGP frame
230 buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
231 product page at
232 <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
233
234config FB_PM2_FIFO_DISCONNECT
235 bool "enable FIFO disconnect feature"
236 depends on FB_PM2 && PCI
237 help
238 Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
239
240config FB_ARMCLCD
241 tristate "ARM PrimeCell PL110 support"
242 depends on FB && ARM && ARM_AMBA
243 select FB_CFB_FILLRECT
244 select FB_CFB_COPYAREA
245 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700246 help
247 This framebuffer device driver is for the ARM PrimeCell PL110
248 Colour LCD controller. ARM PrimeCells provide the building
249 blocks for System on a Chip devices.
250
251 If you want to compile this as a module (=code which can be
252 inserted into and removed from the running kernel), say M
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +0500253 here and read <file:Documentation/kbuild/modules.txt>. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700254 will be called amba-clcd.
255
Marc Singer903e2bb2006-05-16 11:41:30 +0100256choice
257
258 depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
259 prompt "LCD Panel"
260 default FB_ARMCLCD_SHARP_LQ035Q7DB02
261
262config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
263 bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
264 help
265 This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
Matt LaPlantecab00892006-10-03 22:36:44 +0200266 color QVGA, HRTFT panel. The LogicPD device includes
Marc Singer903e2bb2006-05-16 11:41:30 +0100267 an integrated HRTFT controller IC.
268 The native resolution is 240x320.
269
270config FB_ARMCLCD_SHARP_LQ057Q3DC02
271 bool "LogicPD LCD 5.7\" QVGA"
272 help
273 This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
274 color QVGA, TFT panel. The LogicPD device includes an
275 The native resolution is 320x240.
276
277config FB_ARMCLCD_SHARP_LQ64D343
278 bool "LogicPD LCD 6.4\" VGA"
279 help
280 This is an implementation of the Sharp LQ64D343, a 6.4"
281 color VGA, TFT panel. The LogicPD device includes an
282 The native resolution is 640x480.
283
284config FB_ARMCLCD_SHARP_LQ10D368
285 bool "LogicPD LCD 10.4\" VGA"
286 help
287 This is an implementation of the Sharp LQ10D368, a 10.4"
288 color VGA, TFT panel. The LogicPD device includes an
289 The native resolution is 640x480.
290
291
292config FB_ARMCLCD_SHARP_LQ121S1DG41
293 bool "LogicPD LCD 12.1\" SVGA"
294 help
295 This is an implementation of the Sharp LQ121S1DG41, a 12.1"
296 color SVGA, TFT panel. The LogicPD device includes an
297 The native resolution is 800x600.
298
299 This panel requires a clock rate may be an integer fraction
300 of the base LCDCLK frequency. The driver will select the
301 highest frequency available that is lower than the maximum
302 allowed. The panel may flicker if the clock rate is
303 slower than the recommended minimum.
304
305config FB_ARMCLCD_AUO_A070VW01_WIDE
306 bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
307 help
308 This is an implementation of the AU Optronics, a 7.0"
309 WIDE Color. The native resolution is 234x480.
310
311config FB_ARMCLCD_HITACHI
312 bool "Hitachi Wide Screen 800x480"
313 help
314 This is an implementation of the Hitachi 800x480.
315
316endchoice
317
318
Linus Torvalds1da177e2005-04-16 15:20:36 -0700319config FB_ACORN
320 bool "Acorn VIDC support"
321 depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
322 select FB_CFB_FILLRECT
323 select FB_CFB_COPYAREA
324 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700325 help
326 This is the frame buffer device driver for the Acorn VIDC graphics
327 hardware found in Acorn RISC PCs and other ARM-based machines. If
328 unsure, say N.
329
330config FB_CLPS711X
331 bool "CLPS711X LCD support"
332 depends on (FB = y) && ARM && ARCH_CLPS711X
333 select FB_CFB_FILLRECT
334 select FB_CFB_COPYAREA
335 select FB_CFB_IMAGEBLIT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800336 help
337 Say Y to enable the Framebuffer driver for the CLPS7111 and
338 EP7212 processors.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700339
340config FB_SA1100
341 bool "SA-1100 LCD support"
342 depends on (FB = y) && ARM && ARCH_SA1100
343 select FB_CFB_FILLRECT
344 select FB_CFB_COPYAREA
345 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700346 help
347 This is a framebuffer device for the SA-1100 LCD Controller.
348 See <http://www.linux-fbdev.org/> for information on framebuffer
349 devices.
350
351 If you plan to use the LCD display with your SA-1100 system, say
352 Y here.
353
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700354config FB_IMX
355 tristate "Motorola i.MX LCD support"
356 depends on FB && ARM && ARCH_IMX
357 select FB_CFB_FILLRECT
358 select FB_CFB_COPYAREA
359 select FB_CFB_IMAGEBLIT
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700360
Linus Torvalds1da177e2005-04-16 15:20:36 -0700361config FB_CYBER2000
362 tristate "CyberPro 2000/2010/5000 support"
363 depends on FB && PCI && (BROKEN || !SPARC64)
364 select FB_CFB_FILLRECT
365 select FB_CFB_COPYAREA
366 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700367 help
368 This enables support for the Integraphics CyberPro 20x0 and 5000
369 VGA chips used in the Rebel.com Netwinder and other machines.
370 Say Y if you have a NetWinder or a graphics card containing this
371 device, otherwise say N.
372
373config FB_APOLLO
374 bool
375 depends on (FB = y) && APOLLO
376 default y
377 select FB_CFB_FILLRECT
378 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700379
380config FB_Q40
381 bool
382 depends on (FB = y) && Q40
383 default y
384 select FB_CFB_FILLRECT
385 select FB_CFB_COPYAREA
386 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700387
388config FB_AMIGA
389 tristate "Amiga native chipset support"
390 depends on FB && AMIGA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700391 help
392 This is the frame buffer device driver for the builtin graphics
393 chipset found in Amigas.
394
395 To compile this driver as a module, choose M here: the
396 module will be called amifb.
397
398config FB_AMIGA_OCS
399 bool "Amiga OCS chipset support"
400 depends on FB_AMIGA
401 help
402 This enables support for the original Agnus and Denise video chips,
403 found in the Amiga 1000 and most A500's and A2000's. If you intend
404 to run Linux on any of these systems, say Y; otherwise say N.
405
406config FB_AMIGA_ECS
407 bool "Amiga ECS chipset support"
408 depends on FB_AMIGA
409 help
410 This enables support for the Enhanced Chip Set, found in later
411 A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
412 you intend to run Linux on any of these systems, say Y; otherwise
413 say N.
414
415config FB_AMIGA_AGA
416 bool "Amiga AGA chipset support"
417 depends on FB_AMIGA
418 help
419 This enables support for the Advanced Graphics Architecture (also
420 known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
421 and CD32. If you intend to run Linux on any of these systems, say Y;
422 otherwise say N.
423
Linus Torvalds1da177e2005-04-16 15:20:36 -0700424config FB_FM2
425 bool "Amiga FrameMaster II/Rainbow II support"
426 depends on (FB = y) && ZORRO
427 select FB_CFB_FILLRECT
428 select FB_CFB_COPYAREA
429 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700430 help
431 This is the frame buffer device driver for the Amiga FrameMaster
432 card from BSC (exhibited 1992 but not shipped as a CBM product).
433
Jaya Kumar1154ea72005-06-21 17:17:04 -0700434config FB_ARC
435 tristate "Arc Monochrome LCD board support"
436 depends on FB && X86
Antonino A. Daplas922e6f92007-05-08 00:38:58 -0700437 select FB_SYS_FILLRECT
438 select FB_SYS_COPYAREA
439 select FB_SYS_IMAGEBLIT
Antonino A. Daplasd9a05f12007-05-08 00:39:04 -0700440 select FB_SYS_FOPS
Jaya Kumar1154ea72005-06-21 17:17:04 -0700441 help
442 This enables support for the Arc Monochrome LCD board. The board
443 is based on the KS-108 lcd controller and is typically a matrix
444 of 2*n chips. This driver was tested with a 128x64 panel. This
445 driver supports it for use with x86 SBCs through a 16 bit GPIO
Matt LaPlante09509602006-10-03 22:31:37 +0200446 interface (8 bit data, 8 bit control). If you anticipate using
Jaya Kumar1154ea72005-06-21 17:17:04 -0700447 this driver, say Y or M; otherwise say N. You must specify the
448 GPIO IO address to be used for setting control and data.
449
Linus Torvalds1da177e2005-04-16 15:20:36 -0700450config FB_ATARI
451 bool "Atari native chipset support"
Michael Schmitza1005012007-05-01 22:32:39 +0200452 depends on (FB = y) && ATARI
453 select FB_CFB_FILLRECT
454 select FB_CFB_COPYAREA
455 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700456 help
457 This is the frame buffer device driver for the builtin graphics
458 chipset found in Ataris.
459
460config FB_OF
461 bool "Open Firmware frame buffer device support"
Stephen Rothwellbed59272007-03-04 17:04:44 +1100462 depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700463 select FB_CFB_FILLRECT
464 select FB_CFB_COPYAREA
465 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700466 select FB_MACMODES
467 help
468 Say Y if you want support with Open Firmware for your graphics
469 board.
470
471config FB_CONTROL
472 bool "Apple \"control\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700473 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700474 select FB_CFB_FILLRECT
475 select FB_CFB_COPYAREA
476 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700477 select FB_MACMODES
478 help
479 This driver supports a frame buffer for the graphics adapter in the
480 Power Macintosh 7300 and others.
481
482config FB_PLATINUM
483 bool "Apple \"platinum\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700484 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700485 select FB_CFB_FILLRECT
486 select FB_CFB_COPYAREA
487 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700488 select FB_MACMODES
489 help
490 This driver supports a frame buffer for the "platinum" graphics
491 adapter in some Power Macintoshes.
492
493config FB_VALKYRIE
494 bool "Apple \"valkyrie\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700495 depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700496 select FB_CFB_FILLRECT
497 select FB_CFB_COPYAREA
498 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700499 select FB_MACMODES
500 help
501 This driver supports a frame buffer for the "valkyrie" graphics
502 adapter in some Power Macintoshes.
503
504config FB_CT65550
505 bool "Chips 65550 display support"
Randy Dunlap0f8c02342007-11-14 16:58:45 -0800506 depends on (FB = y) && PPC32 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700507 select FB_CFB_FILLRECT
508 select FB_CFB_COPYAREA
509 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700510 help
511 This is the frame buffer device driver for the Chips & Technologies
512 65550 graphics chip in PowerBooks.
513
514config FB_ASILIANT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800515 bool "Asiliant (Chips) 69000 display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700516 depends on (FB = y) && PCI
517 select FB_CFB_FILLRECT
518 select FB_CFB_COPYAREA
519 select FB_CFB_IMAGEBLIT
Antonino A. Daplas4de0b1e2006-04-27 18:40:47 -0700520 help
521 This is the frame buffer device driver for the Asiliant 69030 chipset
Linus Torvalds1da177e2005-04-16 15:20:36 -0700522
523config FB_IMSTT
524 bool "IMS Twin Turbo display support"
525 depends on (FB = y) && PCI
526 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700527 select FB_MACMODES if PPC
528 help
529 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
530 many Macintosh and compatible computers.
531
Linus Torvalds1da177e2005-04-16 15:20:36 -0700532config FB_VGA16
533 tristate "VGA 16-color graphics support"
534 depends on FB && (X86 || PPC)
535 select FB_CFB_FILLRECT
536 select FB_CFB_COPYAREA
537 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700538 select VGASTATE
Antonino A. Daplasd60d2d82007-05-08 00:39:12 -0700539 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700540 help
541 This is the frame buffer device driver for VGA 16 color graphic
542 cards. Say Y if you have such a card.
543
544 To compile this driver as a module, choose M here: the
545 module will be called vga16fb.
546
Michael Henneriche9fa7c42007-10-16 01:29:38 -0700547config FB_BF54X_LQ043
548 tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
549 depends on FB && (BF54x)
550 select FB_CFB_FILLRECT
551 select FB_CFB_COPYAREA
552 select FB_CFB_IMAGEBLIT
553 help
554 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
555
Linus Torvalds1da177e2005-04-16 15:20:36 -0700556config FB_STI
557 tristate "HP STI frame buffer device support"
558 depends on FB && PARISC
559 select FB_CFB_FILLRECT
560 select FB_CFB_COPYAREA
561 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700562 default y
563 ---help---
564 STI refers to the HP "Standard Text Interface" which is a set of
565 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
566 Enabling this option will implement the linux framebuffer device
567 using calls to the STI BIOS routines for initialisation.
568
569 If you enable this option, you will get a planar framebuffer device
570 /dev/fb which will work on the most common HP graphic cards of the
571 NGLE family, including the artist chips (in the 7xx and Bxxx series),
572 HCRX, HCRX24, CRX, CRX24 and VisEG series.
573
574 It is safe to enable this option, so you should probably say "Y".
575
576config FB_MAC
577 bool "Generic Macintosh display support"
578 depends on (FB = y) && MAC
579 select FB_CFB_FILLRECT
580 select FB_CFB_COPYAREA
581 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700582 select FB_MACMODES
583
584# bool ' Apple DAFB display support' CONFIG_FB_DAFB
585config FB_HP300
586 bool
587 depends on (FB = y) && HP300
588 select FB_CFB_FILLRECT
589 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700590 default y
591
592config FB_TGA
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700593 tristate "TGA/SFB+ framebuffer support"
594 depends on FB && (ALPHA || TC)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700595 select FB_CFB_FILLRECT
596 select FB_CFB_COPYAREA
597 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800598 select BITREVERSE
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700599 ---help---
600 This is the frame buffer device driver for generic TGA and SFB+
601 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
602 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
603 TURBOchannel cards, also known as PMAGD-A, -B and -C.
604
605 Due to hardware limitations ZLX-E2 and E3 cards are not supported
606 for DECstation 5000/200 systems. Additionally due to firmware
607 limitations these cards may cause troubles with booting DECstation
608 5000/240 and /260 systems, but are fully supported under Linux if
609 you manage to get it going. ;-)
610
611 Say Y if you have one of those.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700612
Michal Januszewski8bdb3a22007-10-16 01:28:26 -0700613config FB_UVESA
614 tristate "Userspace VESA VGA graphics support"
615 depends on FB && CONNECTOR
616 select FB_CFB_FILLRECT
617 select FB_CFB_COPYAREA
618 select FB_CFB_IMAGEBLIT
619 select FB_MODE_HELPERS
620 help
621 This is the frame buffer driver for generic VBE 2.0 compliant
622 graphic cards. It can also take advantage of VBE 3.0 features,
623 such as refresh rate adjustment.
624
625 This driver generally provides more features than vesafb but
626 requires a userspace helper application called 'v86d'. See
627 <file:Documentation/fb/uvesafb.txt> for more information.
628
629 If unsure, say N.
630
Linus Torvalds1da177e2005-04-16 15:20:36 -0700631config FB_VESA
632 bool "VESA VGA graphics support"
Brian Gerst0d078f62005-10-30 14:59:20 -0800633 depends on (FB = y) && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -0700634 select FB_CFB_FILLRECT
635 select FB_CFB_COPYAREA
636 select FB_CFB_IMAGEBLIT
James Simmonsc9b2ec42006-12-08 02:40:57 -0800637 select VIDEO_SELECT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700638 help
639 This is the frame buffer device driver for generic VESA 2.0
640 compliant graphic cards. The older VESA 1.2 cards are not supported.
641 You will get a boot time penguin logo at no additional cost. Please
642 read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
643
Huang, Ying7c831722007-11-28 16:21:55 -0800644config FB_EFI
645 bool "EFI-based Framebuffer Support"
646 depends on (FB = y) && X86
647 select FB_CFB_FILLRECT
648 select FB_CFB_COPYAREA
649 select FB_CFB_IMAGEBLIT
650 help
651 This is the EFI frame buffer device driver. If the firmware on
652 your platform is UEFI2.0, select Y to add support for
653 Graphics Output Protocol for early console messages to appear.
654
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700655config FB_IMAC
656 bool "Intel-based Macintosh Framebuffer Support"
Edgar Hucekb64ef8a2006-08-13 23:24:16 -0700657 depends on (FB = y) && X86 && EFI
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700658 select FB_CFB_FILLRECT
659 select FB_CFB_COPYAREA
660 select FB_CFB_IMAGEBLIT
661 help
662 This is the frame buffer device driver for the Intel-based Macintosh
663
Jaya Kumaraad09e52007-05-08 00:37:43 -0700664config FB_HECUBA
665 tristate "Hecuba board support"
666 depends on FB && X86 && MMU
Antonino A. Daplasd6774932007-05-08 00:39:00 -0700667 select FB_SYS_FILLRECT
668 select FB_SYS_COPYAREA
669 select FB_SYS_IMAGEBLIT
Antonino A. Daplas28d45642007-05-08 00:39:06 -0700670 select FB_SYS_FOPS
Jaya Kumaraad09e52007-05-08 00:37:43 -0700671 select FB_DEFERRED_IO
672 help
673 This enables support for the Hecuba board. This driver was tested
674 with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200675 interface (8 bit data, 4 bit control). If you anticipate using
Jaya Kumaraad09e52007-05-08 00:37:43 -0700676 this driver, say Y or M; otherwise say N. You must specify the
677 GPIO IO address to be used for setting control and data.
678
Linus Torvalds1da177e2005-04-16 15:20:36 -0700679config FB_HGA
680 tristate "Hercules mono graphics support"
681 depends on FB && X86
682 select FB_CFB_FILLRECT
683 select FB_CFB_COPYAREA
684 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700685 help
686 Say Y here if you have a Hercules mono graphics card.
687
688 To compile this driver as a module, choose M here: the
689 module will be called hgafb.
690
691 As this card technology is 15 years old, most people will answer N
692 here.
693
694config FB_HGA_ACCEL
695 bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
696 depends on FB_HGA && EXPERIMENTAL
697 ---help---
698 This will compile the Hercules mono graphics with
699 acceleration functions.
700
Linus Torvalds1da177e2005-04-16 15:20:36 -0700701config FB_SGIVW
702 tristate "SGI Visual Workstation framebuffer support"
703 depends on FB && X86_VISWS
704 select FB_CFB_FILLRECT
705 select FB_CFB_COPYAREA
706 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700707 help
708 SGI Visual Workstation support for framebuffer graphics.
709
710config FB_GBE
711 bool "SGI Graphics Backend frame buffer support"
712 depends on (FB = y) && (SGI_IP32 || X86_VISWS)
713 select FB_CFB_FILLRECT
714 select FB_CFB_COPYAREA
715 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700716 help
717 This is the frame buffer device driver for SGI Graphics Backend.
718 This chip is used in SGI O2 and Visual Workstation 320/540.
719
720config FB_GBE_MEM
721 int "Video memory size in MB"
722 depends on FB_GBE
Martin Michlmayr80c410d2006-02-24 13:04:16 -0800723 default 4
Linus Torvalds1da177e2005-04-16 15:20:36 -0700724 help
725 This is the amount of memory reserved for the framebuffer,
726 which can be any value between 1MB and 8MB.
727
Mark Fortescue1a571982005-11-29 19:34:44 -0800728config FB_SBUS
729 bool "SBUS and UPA framebuffers"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800730 depends on (FB = y) && SPARC
Mark Fortescue1a571982005-11-29 19:34:44 -0800731 help
732 Say Y if you want support for SBUS or UPA based frame buffer device.
733
Linus Torvalds1da177e2005-04-16 15:20:36 -0700734config FB_BW2
735 bool "BWtwo support"
Adrian Bunke0196302007-02-12 00:54:50 -0800736 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700737 select FB_CFB_FILLRECT
738 select FB_CFB_COPYAREA
739 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700740 help
741 This is the frame buffer device driver for the BWtwo frame buffer.
742
743config FB_CG3
744 bool "CGthree support"
Adrian Bunke0196302007-02-12 00:54:50 -0800745 depends on (FB = y) && (SPARC && FB_SBUS)
Mark Fortescue1a571982005-11-29 19:34:44 -0800746 select FB_CFB_FILLRECT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700747 select FB_CFB_COPYAREA
748 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700749 help
750 This is the frame buffer device driver for the CGthree frame buffer.
751
752config FB_CG6
753 bool "CGsix (GX,TurboGX) support"
Adrian Bunke0196302007-02-12 00:54:50 -0800754 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700755 select FB_CFB_COPYAREA
756 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700757 help
758 This is the frame buffer device driver for the CGsix (GX, TurboGX)
759 frame buffer.
760
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700761config FB_FFB
762 bool "Creator/Creator3D/Elite3D support"
763 depends on FB_SBUS && SPARC64
764 select FB_CFB_COPYAREA
765 select FB_CFB_IMAGEBLIT
766 help
767 This is the frame buffer device driver for the Creator, Creator3D,
768 and Elite3D graphics boards.
769
770config FB_TCX
771 bool "TCX (SS4/SS5 only) support"
772 depends on FB_SBUS
773 select FB_CFB_FILLRECT
774 select FB_CFB_COPYAREA
775 select FB_CFB_IMAGEBLIT
776 help
777 This is the frame buffer device driver for the TCX 24/8bit frame
778 buffer.
779
780config FB_CG14
781 bool "CGfourteen (SX) support"
782 depends on FB_SBUS
783 select FB_CFB_FILLRECT
784 select FB_CFB_COPYAREA
785 select FB_CFB_IMAGEBLIT
786 help
787 This is the frame buffer device driver for the CGfourteen frame
788 buffer on Desktop SPARCsystems with the SX graphics option.
789
790config FB_P9100
791 bool "P9100 (Sparcbook 3 only) support"
792 depends on FB_SBUS
793 select FB_CFB_FILLRECT
794 select FB_CFB_COPYAREA
795 select FB_CFB_IMAGEBLIT
796 help
797 This is the frame buffer device driver for the P9100 card
798 supported on Sparcbook 3 machines.
799
800config FB_LEO
801 bool "Leo (ZX) support"
802 depends on FB_SBUS
803 select FB_CFB_FILLRECT
804 select FB_CFB_COPYAREA
805 select FB_CFB_IMAGEBLIT
806 help
807 This is the frame buffer device driver for the SBUS-based Sun ZX
808 (leo) frame buffer cards.
809
810config FB_IGA
811 bool "IGA 168x display support"
David S. Millere11a6c22007-06-03 17:35:24 -0700812 depends on (FB = y) && SPARC32
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700813 select FB_CFB_FILLRECT
814 select FB_CFB_COPYAREA
815 select FB_CFB_IMAGEBLIT
816 help
817 This is the framebuffer device for the INTERGRAPHICS 1680 and
818 successor frame buffer cards.
819
820config FB_XVR500
821 bool "Sun XVR-500 3DLABS Wildcat support"
David S. Millere11a6c22007-06-03 17:35:24 -0700822 depends on (FB = y) && PCI && SPARC64
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700823 select FB_CFB_FILLRECT
824 select FB_CFB_COPYAREA
825 select FB_CFB_IMAGEBLIT
826 help
827 This is the framebuffer device for the Sun XVR-500 and similar
828 graphics cards based upon the 3DLABS Wildcat chipset. The driver
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200829 only works on sparc64 systems where the system firmware has
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700830 mostly initialized the card already. It is treated as a
831 completely dumb framebuffer device.
832
833config FB_XVR2500
834 bool "Sun XVR-2500 3DLABS Wildcat support"
David S. Millere11a6c22007-06-03 17:35:24 -0700835 depends on (FB = y) && PCI && SPARC64
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700836 select FB_CFB_FILLRECT
837 select FB_CFB_COPYAREA
838 select FB_CFB_IMAGEBLIT
839 help
840 This is the framebuffer device for the Sun XVR-2500 and similar
841 graphics cards based upon the 3DLABS Wildcat chipset. The driver
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200842 only works on sparc64 systems where the system firmware has
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700843 mostly initialized the card already. It is treated as a
844 completely dumb framebuffer device.
845
Linus Torvalds1da177e2005-04-16 15:20:36 -0700846config FB_PVR2
847 tristate "NEC PowerVR 2 display support"
848 depends on FB && SH_DREAMCAST
849 select FB_CFB_FILLRECT
850 select FB_CFB_COPYAREA
851 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700852 ---help---
853 Say Y here if you have a PowerVR 2 card in your box. If you plan to
854 run linux on your Dreamcast, you will have to say Y here.
855 This driver may or may not work on other PowerVR 2 cards, but is
856 totally untested. Use at your own risk. If unsure, say N.
857
858 To compile this driver as a module, choose M here: the
859 module will be called pvr2fb.
860
861 You can pass several parameters to the driver at boot time or at
862 module load time. The parameters look like "video=pvr2:XXX", where
863 the meaning of XXX can be found at the end of the main source file
864 (<file:drivers/video/pvr2fb.c>). Please see the file
865 <file:Documentation/fb/pvr2fb.txt>.
866
867config FB_EPSON1355
868 bool "Epson 1355 framebuffer support"
Paul Mundt1a3f2882007-07-17 04:05:48 -0700869 depends on (FB = y) && ARCH_CEIVA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700870 select FB_CFB_FILLRECT
871 select FB_CFB_COPYAREA
872 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700873 help
874 Build in support for the SED1355 Epson Research Embedded RAMDAC
875 LCD/CRT Controller (since redesignated as the S1D13505) as a
876 framebuffer. Product specs at
877 <http://www.erd.epson.com/vdc/html/products.htm>.
878
Randy Dunlapecc41d52005-11-07 01:00:29 -0800879config FB_S1D13XXX
880 tristate "Epson S1D13XXX framebuffer support"
881 depends on FB
882 select FB_CFB_FILLRECT
883 select FB_CFB_COPYAREA
884 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -0800885 help
886 Support for S1D13XXX framebuffer device family (currently only
887 working with S1D13806). Product specs at
888 <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
889
Nicolas Ferre14340582007-05-10 22:23:26 -0700890config FB_ATMEL
891 tristate "AT91/AT32 LCD Controller support"
Andrew Victor2b3b3512008-01-24 15:10:39 +0100892 depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
Nicolas Ferre14340582007-05-10 22:23:26 -0700893 select FB_CFB_FILLRECT
894 select FB_CFB_COPYAREA
895 select FB_CFB_IMAGEBLIT
896 help
897 This enables support for the AT91/AT32 LCD Controller.
898
899config FB_INTSRAM
900 bool "Frame Buffer in internal SRAM"
901 depends on FB_ATMEL && ARCH_AT91SAM9261
902 help
903 Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
904 to let frame buffer in external SDRAM.
905
Nicolas Ferre250a2692007-07-21 04:37:59 -0700906config FB_ATMEL_STN
907 bool "Use a STN display with AT91/AT32 LCD Controller"
908 depends on FB_ATMEL && MACH_AT91SAM9261EK
909 default n
910 help
911 Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
912 Controller. Say N if you want to connect a TFT.
913
914 If unsure, say N.
915
Linus Torvalds1da177e2005-04-16 15:20:36 -0700916config FB_NVIDIA
917 tristate "nVidia Framebuffer Support"
918 depends on FB && PCI
James Simmonse0e34ef72007-02-10 14:15:43 +0000919 select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700920 select FB_MODE_HELPERS
921 select FB_CFB_FILLRECT
922 select FB_CFB_COPYAREA
923 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800924 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700925 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700926 help
927 This driver supports graphics boards with the nVidia chips, TNT
928 and newer. For very old chipsets, such as the RIVA128, then use
929 the rivafb.
930 Say Y if you have such a graphics board.
931
932 To compile this driver as a module, choose M here: the
933 module will be called nvidiafb.
934
935config FB_NVIDIA_I2C
936 bool "Enable DDC Support"
Benjamin Herrenschmidt85f15032005-11-07 01:00:30 -0800937 depends on FB_NVIDIA
James Simmons166f60d2007-03-06 01:42:02 -0800938 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700939 help
940 This enables I2C support for nVidia Chipsets. This is used
941 only for getting EDID information from the attached display
942 allowing for robust video mode handling and switching.
943
944 Because fbdev-2.6 requires that drivers must be able to
945 independently validate video mode parameters, you should say Y
946 here.
947
Jean Delvare647f2e72007-05-10 22:23:29 -0700948config FB_NVIDIA_DEBUG
949 bool "Lots of debug output"
950 depends on FB_NVIDIA
951 default n
952 help
953 Say Y here if you want the nVidia driver to output all sorts
954 of debugging information to provide to the maintainer when
955 something goes wrong.
956
Michael Hanselmann5474c122006-06-25 05:47:08 -0700957config FB_NVIDIA_BACKLIGHT
958 bool "Support for backlight control"
James Simmonse0e34ef72007-02-10 14:15:43 +0000959 depends on FB_NVIDIA
Michael Hanselmann5474c122006-06-25 05:47:08 -0700960 default y
961 help
962 Say Y here if you want to control the backlight of your display.
963
Linus Torvalds1da177e2005-04-16 15:20:36 -0700964config FB_RIVA
965 tristate "nVidia Riva support"
966 depends on FB && PCI
James Simmonse0e34ef72007-02-10 14:15:43 +0000967 select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700968 select FB_MODE_HELPERS
969 select FB_CFB_FILLRECT
970 select FB_CFB_COPYAREA
971 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800972 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700973 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700974 help
975 This driver supports graphics boards with the nVidia Riva/Geforce
976 chips.
977 Say Y if you have such a graphics board.
978
979 To compile this driver as a module, choose M here: the
980 module will be called rivafb.
981
982config FB_RIVA_I2C
983 bool "Enable DDC Support"
984 depends on FB_RIVA
James Simmons166f60d2007-03-06 01:42:02 -0800985 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700986 help
987 This enables I2C support for nVidia Chipsets. This is used
988 only for getting EDID information from the attached display
989 allowing for robust video mode handling and switching.
990
991 Because fbdev-2.6 requires that drivers must be able to
992 independently validate video mode parameters, you should say Y
993 here.
994
995config FB_RIVA_DEBUG
Jean Delvare647f2e72007-05-10 22:23:29 -0700996 bool "Lots of debug output"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700997 depends on FB_RIVA
998 default n
999 help
1000 Say Y here if you want the Riva driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001001 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001002 something goes wrong.
1003
Michael Hanselmann5474c122006-06-25 05:47:08 -07001004config FB_RIVA_BACKLIGHT
1005 bool "Support for backlight control"
James Simmonse0e34ef72007-02-10 14:15:43 +00001006 depends on FB_RIVA
Michael Hanselmann5474c122006-06-25 05:47:08 -07001007 default y
1008 help
1009 Say Y here if you want to control the backlight of your display.
1010
Linus Torvalds1da177e2005-04-16 15:20:36 -07001011config FB_I810
1012 tristate "Intel 810/815 support (EXPERIMENTAL)"
Brian Gerst0d078f62005-10-30 14:59:20 -08001013 depends on FB && EXPERIMENTAL && PCI && X86_32
Linus Torvalds1da177e2005-04-16 15:20:36 -07001014 select AGP
1015 select AGP_INTEL
1016 select FB_MODE_HELPERS
1017 select FB_CFB_FILLRECT
1018 select FB_CFB_COPYAREA
1019 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001020 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001021 help
1022 This driver supports the on-board graphics built in to the Intel 810
1023 and 815 chipsets. Say Y if you have and plan to use such a board.
1024
1025 To compile this driver as a module, choose M here: the
1026 module will be called i810fb.
1027
1028 For more information, please read
1029 <file:Documentation/fb/intel810.txt>
1030
1031config FB_I810_GTF
1032 bool "use VESA Generalized Timing Formula"
1033 depends on FB_I810
1034 help
1035 If you say Y, then the VESA standard, Generalized Timing Formula
1036 or GTF, will be used to calculate the required video timing values
1037 per video mode. Since the GTF allows nondiscrete timings
1038 (nondiscrete being a range of values as opposed to discrete being a
1039 set of values), you'll be able to use any combination of horizontal
1040 and vertical resolutions, and vertical refresh rates without having
1041 to specify your own timing parameters. This is especially useful
1042 to maximize the performance of an aging display, or if you just
1043 have a display with nonstandard dimensions. A VESA compliant
1044 monitor is recommended, but can still work with non-compliant ones.
1045 If you need or want this, then select this option. The timings may
1046 not be compliant with Intel's recommended values. Use at your own
1047 risk.
1048
1049 If you say N, the driver will revert to discrete video timings
1050 using a set recommended by Intel in their documentation.
1051
1052 If unsure, say N.
1053
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -07001054config FB_I810_I2C
1055 bool "Enable DDC Support"
Antonino A. Daplasdb845022005-09-13 01:25:02 -07001056 depends on FB_I810 && FB_I810_GTF
Antonino A. Daplase80987f2006-10-03 01:14:44 -07001057 select FB_DDC
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -07001058 help
1059
Alan Hourihanedbe7e422007-05-08 00:39:25 -07001060config FB_LE80578
1061 tristate "Intel LE80578 (Vermilion) support"
1062 depends on FB && PCI && X86
1063 select FB_MODE_HELPERS
1064 select FB_CFB_FILLRECT
1065 select FB_CFB_COPYAREA
1066 select FB_CFB_IMAGEBLIT
1067 help
1068 This driver supports the LE80578 (Vermilion Range) chipset
1069
1070config FB_CARILLO_RANCH
1071 tristate "Intel Carillo Ranch support"
1072 depends on FB_LE80578 && FB && PCI && X86
1073 help
1074 This driver supports the LE80578 (Carillo Ranch) board
1075
Linus Torvalds1da177e2005-04-16 15:20:36 -07001076config FB_INTEL
Christian Merkled463d342006-08-22 10:07:01 +10001077 tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
Dave Airlie0c187ad2006-03-23 11:20:08 +11001078 depends on FB && EXPERIMENTAL && PCI && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -07001079 select AGP
1080 select AGP_INTEL
1081 select FB_MODE_HELPERS
1082 select FB_CFB_FILLRECT
1083 select FB_CFB_COPYAREA
1084 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001085 help
1086 This driver supports the on-board graphics built in to the Intel
Christian Merkled463d342006-08-22 10:07:01 +10001087 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001088 Say Y if you have and plan to use such a board.
1089
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001090 If you say Y here and want DDC/I2C support you must first say Y to
1091 "I2C support" and "I2C bit-banging support" in the character devices
1092 section.
1093
1094 If you say M here then "I2C support" and "I2C bit-banging support"
1095 can be build either as modules or built-in.
1096
1097 To compile this driver as a module, choose M here: the
Linus Torvalds1da177e2005-04-16 15:20:36 -07001098 module will be called intelfb.
1099
Christian Merkled463d342006-08-22 10:07:01 +10001100 For more information, please read <file:Documentation/fb/intelfb.txt>
1101
Linus Torvalds1da177e2005-04-16 15:20:36 -07001102config FB_INTEL_DEBUG
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001103 bool "Intel driver Debug Messages"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001104 depends on FB_INTEL
1105 ---help---
1106 Say Y here if you want the Intel driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001107 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001108 something goes wrong.
1109
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001110config FB_INTEL_I2C
1111 bool "DDC/I2C for Intel framebuffer support"
1112 depends on FB_INTEL
James Simmons166f60d2007-03-06 01:42:02 -08001113 select FB_DDC
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001114 default y
1115 help
1116 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1117
Linus Torvalds1da177e2005-04-16 15:20:36 -07001118config FB_MATROX
1119 tristate "Matrox acceleration"
1120 depends on FB && PCI
1121 select FB_CFB_FILLRECT
1122 select FB_CFB_COPYAREA
1123 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001124 select FB_TILEBLITTING
1125 select FB_MACMODES if PPC_PMAC
1126 ---help---
1127 Say Y here if you have a Matrox Millennium, Matrox Millennium II,
1128 Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
1129 Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
1130 Matrox G400, G450 or G550 card in your box.
1131
1132 To compile this driver as a module, choose M here: the
1133 module will be called matroxfb.
1134
1135 You can pass several parameters to the driver at boot time or at
1136 module load time. The parameters look like "video=matrox:XXX", and
1137 are described in <file:Documentation/fb/matroxfb.txt>.
1138
1139config FB_MATROX_MILLENIUM
1140 bool "Millennium I/II support"
1141 depends on FB_MATROX
1142 help
1143 Say Y here if you have a Matrox Millennium or Matrox Millennium II
1144 video card. If you select "Advanced lowlevel driver options" below,
1145 you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
1146 packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
1147 also use font widths different from 8.
1148
1149config FB_MATROX_MYSTIQUE
1150 bool "Mystique support"
1151 depends on FB_MATROX
1152 help
1153 Say Y here if you have a Matrox Mystique or Matrox Mystique 220
1154 video card. If you select "Advanced lowlevel driver options" below,
1155 you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
1156 packed pixel and 32 bpp packed pixel. You can also use font widths
1157 different from 8.
1158
1159config FB_MATROX_G
1160 bool "G100/G200/G400/G450/G550 support"
1161 depends on FB_MATROX
1162 ---help---
1163 Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
1164 video card. If you select "Advanced lowlevel driver options", you
1165 should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
1166 pixel and 32 bpp packed pixel. You can also use font widths
1167 different from 8.
1168
1169 If you need support for G400 secondary head, you must first say Y to
1170 "I2C support" in the character devices section, and then to
1171 "Matrox I2C support" and "G400 second head support" here in the
1172 framebuffer section. G450/G550 secondary head and digital output
1173 are supported without additional modules.
1174
1175 The driver starts in monitor mode. You must use the matroxset tool
1176 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1177 swap primary and secondary head outputs, or to change output mode.
1178 Secondary head driver always start in 640x480 resolution and you
1179 must use fbset to change it.
1180
1181 Do not forget that second head supports only 16 and 32 bpp
1182 packed pixels, so it is a good idea to compile them into the kernel
1183 too. You can use only some font widths, as the driver uses generic
1184 painting procedures (the secondary head does not use acceleration
1185 engine).
1186
1187 G450/G550 hardware can display TV picture only from secondary CRTC,
1188 and it performs no scaling, so picture must have 525 or 625 lines.
1189
1190config FB_MATROX_I2C
1191 tristate "Matrox I2C support"
James Simmons166f60d2007-03-06 01:42:02 -08001192 depends on FB_MATROX
1193 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001194 ---help---
1195 This drivers creates I2C buses which are needed for accessing the
1196 DDC (I2C) bus present on all Matroxes, an I2C bus which
1197 interconnects Matrox optional devices, like MGA-TVO on G200 and
1198 G400, and the secondary head DDC bus, present on G400 only.
1199
1200 You can say Y or M here if you want to experiment with monitor
1201 detection code. You must say Y or M here if you want to use either
1202 second head of G400 or MGA-TVO on G200 or G400.
1203
1204 If you compile it as module, it will create a module named
1205 i2c-matroxfb.
1206
1207config FB_MATROX_MAVEN
1208 tristate "G400 second head support"
1209 depends on FB_MATROX_G && FB_MATROX_I2C
1210 ---help---
1211 WARNING !!! This support does not work with G450 !!!
1212
1213 Say Y or M here if you want to use a secondary head (meaning two
1214 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1215 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1216 secondary head output is blanked while you are in X. With XFree
1217 3.9.17 preview you can use both heads if you use SVGA over fbdev or
1218 the fbdev driver on first head and the fbdev driver on second head.
1219
1220 If you compile it as module, two modules are created,
1221 matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
1222 both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
1223 also load i2c-matroxfb to get it to run.
1224
1225 The driver starts in monitor mode and you must use the matroxset
1226 tool (available at
1227 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1228 PAL or NTSC or to swap primary and secondary head outputs.
1229 Secondary head driver also always start in 640x480 resolution, you
1230 must use fbset to change it.
1231
1232 Also do not forget that second head supports only 16 and 32 bpp
1233 packed pixels, so it is a good idea to compile them into the kernel
1234 too. You can use only some font widths, as the driver uses generic
1235 painting procedures (the secondary head does not use acceleration
1236 engine).
1237
1238config FB_MATROX_MULTIHEAD
1239 bool "Multihead support"
1240 depends on FB_MATROX
1241 ---help---
1242 Say Y here if you have more than one (supported) Matrox device in
1243 your computer and you want to use all of them for different monitors
1244 ("multihead"). If you have only one device, you should say N because
1245 the driver compiled with Y is larger and a bit slower, especially on
1246 ia32 (ix86).
1247
1248 If you said M to "Matrox unified accelerated driver" and N here, you
1249 will still be able to use several Matrox devices simultaneously:
1250 insert several instances of the module matroxfb into the kernel
1251 with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
1252 for the different Matrox devices. This method is slightly faster but
1253 uses 40 KB of kernel memory per Matrox card.
1254
1255 There is no need for enabling 'Matrox multihead support' if you have
1256 only one Matrox card in the box.
1257
Linus Torvalds1da177e2005-04-16 15:20:36 -07001258config FB_RADEON
1259 tristate "ATI Radeon display support"
1260 depends on FB && PCI
James Simmonse0e34ef72007-02-10 14:15:43 +00001261 select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001262 select FB_MODE_HELPERS
1263 select FB_CFB_FILLRECT
1264 select FB_CFB_COPYAREA
1265 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001266 select FB_MACMODES if PPC_OF
1267 help
1268 Choose this option if you want to use an ATI Radeon graphics card as
1269 a framebuffer device. There are both PCI and AGP versions. You
1270 don't need to choose this to run the Radeon in plain VGA mode.
1271
1272 If you say Y here and want DDC/I2C support you must first say Y to
1273 "I2C support" and "I2C bit-banging support" in the character devices
1274 section.
1275
1276 If you say M here then "I2C support" and "I2C bit-banging support"
1277 can be build either as modules or built-in.
1278
1279 There is a product page at
Antonino A. Daplasf510a3c2005-09-09 13:04:41 -07001280 http://apps.ati.com/ATIcompare/
Michael Hanselmann5474c122006-06-25 05:47:08 -07001281
Linus Torvalds1da177e2005-04-16 15:20:36 -07001282config FB_RADEON_I2C
1283 bool "DDC/I2C for ATI Radeon support"
1284 depends on FB_RADEON
James Simmons166f60d2007-03-06 01:42:02 -08001285 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001286 default y
1287 help
1288 Say Y here if you want DDC/I2C support for your Radeon board.
1289
Michael Hanselmann5474c122006-06-25 05:47:08 -07001290config FB_RADEON_BACKLIGHT
1291 bool "Support for backlight control"
James Simmonse0e34ef72007-02-10 14:15:43 +00001292 depends on FB_RADEON
Michael Hanselmann5474c122006-06-25 05:47:08 -07001293 default y
1294 help
1295 Say Y here if you want to control the backlight of your display.
1296
Linus Torvalds1da177e2005-04-16 15:20:36 -07001297config FB_RADEON_DEBUG
1298 bool "Lots of debug output from Radeon driver"
1299 depends on FB_RADEON
1300 default n
1301 help
1302 Say Y here if you want the Radeon driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001303 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001304 something goes wrong.
1305
1306config FB_ATY128
1307 tristate "ATI Rage128 display support"
1308 depends on FB && PCI
1309 select FB_CFB_FILLRECT
1310 select FB_CFB_COPYAREA
1311 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef72007-02-10 14:15:43 +00001312 select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001313 select FB_MACMODES if PPC_PMAC
1314 help
1315 This driver supports graphics boards with the ATI Rage128 chips.
1316 Say Y if you have such a graphics board and read
1317 <file:Documentation/fb/aty128fb.txt>.
1318
1319 To compile this driver as a module, choose M here: the
1320 module will be called aty128fb.
1321
Michael Hanselmann5474c122006-06-25 05:47:08 -07001322config FB_ATY128_BACKLIGHT
1323 bool "Support for backlight control"
James Simmonse0e34ef72007-02-10 14:15:43 +00001324 depends on FB_ATY128
Michael Hanselmann5474c122006-06-25 05:47:08 -07001325 default y
1326 help
1327 Say Y here if you want to control the backlight of your display.
1328
Linus Torvalds1da177e2005-04-16 15:20:36 -07001329config FB_ATY
1330 tristate "ATI Mach64 display support" if PCI || ATARI
Andrew Mortonf2e782e2006-04-10 22:55:45 -07001331 depends on FB && !SPARC32
Linus Torvalds1da177e2005-04-16 15:20:36 -07001332 select FB_CFB_FILLRECT
1333 select FB_CFB_COPYAREA
1334 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef72007-02-10 14:15:43 +00001335 select FB_BACKLIGHT if FB_ATY_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001336 select FB_MACMODES if PPC
1337 help
1338 This driver supports graphics boards with the ATI Mach64 chips.
1339 Say Y if you have such a graphics board.
1340
1341 To compile this driver as a module, choose M here: the
1342 module will be called atyfb.
1343
1344config FB_ATY_CT
1345 bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
1346 depends on PCI && FB_ATY
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -07001347 default y if SPARC64 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001348 help
1349 Say Y here to support use of ATI's 64-bit Rage boards (or other
1350 boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1351 framebuffer device. The ATI product support page for these boards
1352 is at <http://support.ati.com/products/pc/mach64/>.
1353
1354config FB_ATY_GENERIC_LCD
1355 bool "Mach64 generic LCD support (EXPERIMENTAL)"
1356 depends on FB_ATY_CT
1357 help
1358 Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
1359 Rage XC, or Rage XL chipset.
1360
Linus Torvalds1da177e2005-04-16 15:20:36 -07001361config FB_ATY_GX
1362 bool "Mach64 GX support" if PCI
1363 depends on FB_ATY
1364 default y if ATARI
1365 help
1366 Say Y here to support use of the ATI Mach64 Graphics Expression
1367 board (or other boards based on the Mach64 GX chipset) as a
1368 framebuffer device. The ATI product support page for these boards
1369 is at
1370 <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
1371
Michael Hanselmann5474c122006-06-25 05:47:08 -07001372config FB_ATY_BACKLIGHT
1373 bool "Support for backlight control"
James Simmonse0e34ef72007-02-10 14:15:43 +00001374 depends on FB_ATY
Michael Hanselmann5474c122006-06-25 05:47:08 -07001375 default y
1376 help
1377 Say Y here if you want to control the backlight of your display.
1378
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001379config FB_S3
1380 tristate "S3 Trio/Virge support"
1381 depends on FB && PCI
1382 select FB_CFB_FILLRECT
1383 select FB_CFB_COPYAREA
1384 select FB_CFB_IMAGEBLIT
1385 select FB_TILEBLITTING
1386 select FB_SVGALIB
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001387 select VGASTATE
Antonino A. Daplas8db51662007-05-08 00:39:14 -07001388 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001389 ---help---
1390 Driver for graphics boards with S3 Trio / S3 Virge chip.
1391
Linus Torvalds1da177e2005-04-16 15:20:36 -07001392config FB_SAVAGE
1393 tristate "S3 Savage support"
1394 depends on FB && PCI && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001395 select FB_MODE_HELPERS
1396 select FB_CFB_FILLRECT
1397 select FB_CFB_COPYAREA
1398 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001399 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001400 help
1401 This driver supports notebooks and computers with S3 Savage PCI/AGP
1402 chips.
1403
1404 Say Y if you have such a graphics card.
1405
1406 To compile this driver as a module, choose M here; the module
1407 will be called savagefb.
1408
1409config FB_SAVAGE_I2C
1410 bool "Enable DDC2 Support"
1411 depends on FB_SAVAGE
James Simmons166f60d2007-03-06 01:42:02 -08001412 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001413 help
1414 This enables I2C support for S3 Savage Chipsets. This is used
1415 only for getting EDID information from the attached display
1416 allowing for robust video mode handling and switching.
1417
1418 Because fbdev-2.6 requires that drivers must be able to
1419 independently validate video mode parameters, you should say Y
1420 here.
1421
1422config FB_SAVAGE_ACCEL
1423 bool "Enable Console Acceleration"
1424 depends on FB_SAVAGE
1425 default n
1426 help
1427 This option will compile in console acceleration support. If
1428 the resulting framebuffer console has bothersome glitches, then
1429 choose N here.
1430
1431config FB_SIS
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001432 tristate "SiS/XGI display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001433 depends on FB && PCI
1434 select FB_CFB_FILLRECT
1435 select FB_CFB_COPYAREA
1436 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001437 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001438 This is the frame buffer device driver for the SiS 300, 315, 330
1439 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
1440 Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001441
1442 To compile this driver as a module, choose M here; the module
1443 will be called sisfb.
1444
1445config FB_SIS_300
1446 bool "SiS 300 series support"
1447 depends on FB_SIS
1448 help
1449 Say Y here to support use of the SiS 300/305, 540, 630 and 730.
1450
1451config FB_SIS_315
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001452 bool "SiS 315/330/340 series and XGI support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001453 depends on FB_SIS
1454 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001455 Say Y here to support use of the SiS 315, 330 and 340 series
1456 (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
1457 as XGI V3XT, V5, V8 and Z7.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001458
1459config FB_NEOMAGIC
1460 tristate "NeoMagic display support"
1461 depends on FB && PCI
1462 select FB_MODE_HELPERS
1463 select FB_CFB_FILLRECT
1464 select FB_CFB_COPYAREA
1465 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001466 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001467 help
1468 This driver supports notebooks with NeoMagic PCI chips.
1469 Say Y if you have such a graphics card.
1470
1471 To compile this driver as a module, choose M here: the
1472 module will be called neofb.
1473
1474config FB_KYRO
1475 tristate "IMG Kyro support"
1476 depends on FB && PCI
1477 select FB_CFB_FILLRECT
1478 select FB_CFB_COPYAREA
1479 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001480 help
1481 Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1482 graphics board.
1483
1484 To compile this driver as a module, choose M here: the
1485 module will be called kyrofb.
1486
1487config FB_3DFX
1488 tristate "3Dfx Banshee/Voodoo3 display support"
1489 depends on FB && PCI
1490 select FB_CFB_IMAGEBLIT
1491 select FB_CFB_FILLRECT
1492 select FB_CFB_COPYAREA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001493 help
1494 This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
1495 chips. Say Y if you have such a graphics board.
1496
1497 To compile this driver as a module, choose M here: the
1498 module will be called tdfxfb.
1499
1500config FB_3DFX_ACCEL
1501 bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
1502 depends on FB_3DFX && EXPERIMENTAL
1503 ---help---
1504 This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
1505 with acceleration functions.
1506
1507
1508config FB_VOODOO1
1509 tristate "3Dfx Voodoo Graphics (sst1) support"
1510 depends on FB && PCI
1511 select FB_CFB_FILLRECT
1512 select FB_CFB_COPYAREA
1513 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001514 ---help---
1515 Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
1516 Voodoo2 (cvg) based graphics card.
1517
1518 To compile this driver as a module, choose M here: the
1519 module will be called sstfb.
1520
1521 WARNING: Do not use any application that uses the 3D engine
1522 (namely glide) while using this driver.
Dirk Hohndele4031492007-10-30 13:37:19 -07001523 Please read the <file:Documentation/fb/sstfb.txt> for supported
Linus Torvalds1da177e2005-04-16 15:20:36 -07001524 options and other important info support.
1525
Ondrej Zajicek558b7bd2007-05-09 02:35:31 -07001526config FB_VT8623
1527 tristate "VIA VT8623 support"
1528 depends on FB && PCI
1529 select FB_CFB_FILLRECT
1530 select FB_CFB_COPYAREA
1531 select FB_CFB_IMAGEBLIT
1532 select FB_TILEBLITTING
1533 select FB_SVGALIB
1534 select VGASTATE
1535 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1536 ---help---
1537 Driver for CastleRock integrated graphics core in the
1538 VIA VT8623 [Apollo CLE266] chipset.
1539
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001540config FB_CYBLA
1541 tristate "Cyberblade/i1 support"
Knut Petersen44637a12006-01-09 15:04:20 +01001542 depends on FB && PCI && X86_32 && !64BIT
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001543 select FB_CFB_IMAGEBLIT
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001544 select VIDEO_SELECT
1545 ---help---
1546 This driver is supposed to support the Trident Cyberblade/i1
1547 graphics core integrated in the VIA VT8601A North Bridge,
1548 also known as VIA Apollo PLE133.
1549
1550 Status:
1551 - Developed, tested and working on EPIA 5000 and EPIA 800.
1552 - Does work reliable on all systems with CRT/LCD connected to
1553 normal VGA ports.
1554 - Should work on systems that do use the internal LCD port, but
1555 this is absolutely not tested.
1556
1557 Character imageblit, copyarea and rectangle fill are hw accelerated,
1558 ypan scrolling is used by default.
1559
1560 Please do read <file:Documentation/fb/cyblafb/*>.
1561
1562 To compile this driver as a module, choose M here: the
1563 module will be called cyblafb.
1564
Linus Torvalds1da177e2005-04-16 15:20:36 -07001565config FB_TRIDENT
1566 tristate "Trident support"
1567 depends on FB && PCI
1568 select FB_CFB_FILLRECT
1569 select FB_CFB_COPYAREA
1570 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001571 ---help---
1572 This driver is supposed to support graphics boards with the
1573 Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
1574 but also on some motherboards. For more information, read
1575 <file:Documentation/fb/tridentfb.txt>
1576
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001577 Cyberblade/i1 support will be removed soon, use the cyblafb driver
1578 instead.
1579
Linus Torvalds1da177e2005-04-16 15:20:36 -07001580 Say Y if you have such a graphics board.
1581
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001582
Linus Torvalds1da177e2005-04-16 15:20:36 -07001583 To compile this driver as a module, choose M here: the
1584 module will be called tridentfb.
1585
1586config FB_TRIDENT_ACCEL
1587 bool "Trident Acceleration functions (EXPERIMENTAL)"
1588 depends on FB_TRIDENT && EXPERIMENTAL
1589 ---help---
1590 This will compile the Trident frame buffer device with
1591 acceleration functions.
1592
Ondrej Zajicek681e1472007-05-09 02:35:31 -07001593config FB_ARK
1594 tristate "ARK 2000PV support"
1595 depends on FB && PCI
1596 select FB_CFB_FILLRECT
1597 select FB_CFB_COPYAREA
1598 select FB_CFB_IMAGEBLIT
1599 select FB_TILEBLITTING
1600 select FB_SVGALIB
1601 select VGASTATE
1602 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1603 ---help---
1604 Driver for PCI graphics boards with ARK 2000PV chip
1605 and ICS 5342 RAMDAC.
1606
Linus Torvalds1da177e2005-04-16 15:20:36 -07001607config FB_PM3
Krzysztof Heltf23a06f2007-05-10 22:23:25 -07001608 tristate "Permedia3 support (EXPERIMENTAL)"
1609 depends on FB && PCI && EXPERIMENTAL
1610 select FB_CFB_FILLRECT
1611 select FB_CFB_COPYAREA
1612 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001613 help
1614 This is the frame buffer device driver for the 3DLabs Permedia3
1615 chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
1616 similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
1617 and maybe other boards.
1618
Linus Torvalds1da177e2005-04-16 15:20:36 -07001619config FB_AU1100
1620 bool "Au1100 LCD Driver"
Ralf Baechled1709e42007-07-23 18:43:50 -07001621 depends on (FB = y) && MIPS && SOC_AU1100
1622 select FB_CFB_FILLRECT
1623 select FB_CFB_COPYAREA
1624 select FB_CFB_IMAGEBLIT
1625 help
1626 This is the framebuffer driver for the AMD Au1100 SOC. It can drive
1627 various panels and CRTs by passing in kernel cmd line option
1628 au1100fb:panel=<name>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001629
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001630config FB_AU1200
1631 bool "Au1200 LCD Driver"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001632 depends on (FB = y) && MIPS && SOC_AU1200
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001633 select FB_CFB_FILLRECT
1634 select FB_CFB_COPYAREA
1635 select FB_CFB_IMAGEBLIT
1636 help
1637 This is the framebuffer driver for the AMD Au1200 SOC. It can drive
1638 various panels and CRTs by passing in kernel cmd line option
1639 au1200fb:panel=<name>.
1640
Linus Torvalds1da177e2005-04-16 15:20:36 -07001641source "drivers/video/geode/Kconfig"
1642
Linus Torvalds1da177e2005-04-16 15:20:36 -07001643config FB_HIT
1644 tristate "HD64461 Frame Buffer support"
1645 depends on FB && HD64461
1646 select FB_CFB_FILLRECT
1647 select FB_CFB_COPYAREA
1648 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001649 help
1650 This is the frame buffer device driver for the Hitachi HD64461 LCD
1651 frame buffer card.
1652
1653config FB_PMAG_AA
1654 bool "PMAG-AA TURBOchannel framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001655 depends on (FB = y) && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001656 select FB_CFB_FILLRECT
1657 select FB_CFB_COPYAREA
1658 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001659 help
1660 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1661 used mainly in the MIPS-based DECstation series.
1662
1663config FB_PMAG_BA
Maciej W. Rozycki335dc502007-02-05 16:28:28 -08001664 tristate "PMAG-BA TURBOchannel framebuffer support"
1665 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001666 select FB_CFB_FILLRECT
1667 select FB_CFB_COPYAREA
1668 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001669 help
1670 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1671 used mainly in the MIPS-based DECstation series.
1672
1673config FB_PMAGB_B
Maciej W. Rozycki9084b002007-02-05 16:28:29 -08001674 tristate "PMAGB-B TURBOchannel framebuffer support"
Maciej W. Rozycki28ea28a2007-10-16 01:29:28 -07001675 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001676 select FB_CFB_FILLRECT
1677 select FB_CFB_COPYAREA
1678 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001679 help
1680 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1681 in the MIPS-based DECstation series. The card is currently only
1682 supported in 1280x1024x8 mode.
1683
1684config FB_MAXINE
1685 bool "Maxine (Personal DECstation) onboard framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001686 depends on (FB = y) && MACH_DECSTATION
Linus Torvalds1da177e2005-04-16 15:20:36 -07001687 select FB_CFB_FILLRECT
1688 select FB_CFB_COPYAREA
1689 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001690 help
1691 Support for the onboard framebuffer (1024x768x8) in the Personal
1692 DECstation series (Personal DECstation 5000/20, /25, /33, /50,
1693 Codename "Maxine").
1694
Linus Torvalds1da177e2005-04-16 15:20:36 -07001695config FB_G364
Yoichi Yuasab38817d2005-07-27 11:43:28 -07001696 bool "G364 frame buffer support"
1697 depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001698 select FB_CFB_FILLRECT
1699 select FB_CFB_COPYAREA
1700 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001701 help
1702 The G364 driver is the framebuffer used in MIPS Magnum 4000 and
1703 Olivetti M700-10 systems.
1704
1705config FB_68328
1706 bool "Motorola 68328 native frame buffer support"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001707 depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001708 select FB_CFB_FILLRECT
1709 select FB_CFB_COPYAREA
1710 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001711 help
1712 Say Y here if you want to support the built-in frame buffer of
1713 the Motorola 68328 CPU family.
1714
1715config FB_PXA
1716 tristate "PXA LCD framebuffer support"
1717 depends on FB && ARCH_PXA
1718 select FB_CFB_FILLRECT
1719 select FB_CFB_COPYAREA
1720 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001721 ---help---
1722 Frame buffer driver for the built-in LCD controller in the Intel
1723 PXA2x0 processor.
1724
1725 This driver is also available as a module ( = code which can be
1726 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001727 module will be called pxafb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001728 say M here and read <file:Documentation/kbuild/modules.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001729
1730 If unsure, say N.
1731
Linus Torvalds1da177e2005-04-16 15:20:36 -07001732config FB_PXA_PARAMETERS
1733 bool "PXA LCD command line parameters"
1734 default n
1735 depends on FB_PXA
1736 ---help---
1737 Enable the use of kernel command line or module parameters
1738 to configure the physical properties of the LCD panel when
1739 using the PXA LCD driver.
1740
1741 This option allows you to override the panel parameters
1742 supplied by the platform in order to support multiple
1743 different models of flatpanel. If you will only be using a
1744 single model of flatpanel then you can safely leave this
1745 option disabled.
1746
1747 <file:Documentation/fb/pxafb.txt> describes the available parameters.
1748
Mike Rapoport22caf042006-07-14 00:24:34 -07001749config FB_MBX
1750 tristate "2700G LCD framebuffer support"
1751 depends on FB && ARCH_PXA
1752 select FB_CFB_FILLRECT
1753 select FB_CFB_COPYAREA
1754 select FB_CFB_IMAGEBLIT
1755 ---help---
1756 Framebuffer driver for the Intel 2700G (Marathon) Graphics
1757 Accelerator
1758
1759config FB_MBX_DEBUG
1760 bool "Enable debugging info via debugfs"
1761 depends on FB_MBX && DEBUG_FS
1762 default n
1763 ---help---
1764 Enable this if you want debugging information using the debug
1765 filesystem (debugfs)
1766
1767 If unsure, say N.
1768
Randy Dunlapecc41d52005-11-07 01:00:29 -08001769config FB_W100
1770 tristate "W100 frame buffer support"
1771 depends on FB && PXA_SHARPSL
1772 select FB_CFB_FILLRECT
1773 select FB_CFB_COPYAREA
1774 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -08001775 ---help---
1776 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
1777
1778 This driver is also available as a module ( = code which can be
1779 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001780 module will be called w100fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001781 say M here and read <file:Documentation/kbuild/modules.txt>.
Randy Dunlapecc41d52005-11-07 01:00:29 -08001782
1783 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001784
Arnaud Patard20fd5762005-09-09 13:10:07 -07001785config FB_S3C2410
1786 tristate "S3C2410 LCD framebuffer support"
1787 depends on FB && ARCH_S3C2410
1788 select FB_CFB_FILLRECT
1789 select FB_CFB_COPYAREA
1790 select FB_CFB_IMAGEBLIT
Arnaud Patard20fd5762005-09-09 13:10:07 -07001791 ---help---
1792 Frame buffer driver for the built-in LCD controller in the Samsung
1793 S3C2410 processor.
1794
1795 This driver is also available as a module ( = code which can be
1796 inserted and removed from the running kernel whenever you want). The
1797 module will be called s3c2410fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001798 say M here and read <file:Documentation/kbuild/modules.txt>.
Arnaud Patard20fd5762005-09-09 13:10:07 -07001799
1800 If unsure, say N.
1801config FB_S3C2410_DEBUG
1802 bool "S3C2410 lcd debug messages"
1803 depends on FB_S3C2410
1804 help
1805 Turn on debugging messages. Note that you can set/unset at run time
1806 through sysfs
1807
Ben Dooks5fc404e2007-02-20 13:58:21 -08001808config FB_SM501
1809 tristate "Silicon Motion SM501 framebuffer support"
1810 depends on FB && MFD_SM501
1811 select FB_CFB_FILLRECT
1812 select FB_CFB_COPYAREA
1813 select FB_CFB_IMAGEBLIT
1814 ---help---
1815 Frame buffer driver for the CRT and LCD controllers in the Silicon
1816 Motion SM501.
1817
1818 This driver is also available as a module ( = code which can be
1819 inserted and removed from the running kernel whenever you want). The
1820 module will be called sm501fb. If you want to compile it as a module,
Dirk Hohndele4031492007-10-30 13:37:19 -07001821 say M here and read <file:Documentation/kbuild/modules.txt>.
Ben Dooks5fc404e2007-02-20 13:58:21 -08001822
1823 If unsure, say N.
1824
1825
Vitaly Wool36c93662006-07-03 00:24:19 -07001826config FB_PNX4008_DUM
1827 tristate "Display Update Module support on Philips PNX4008 board"
1828 depends on FB && ARCH_PNX4008
1829 ---help---
1830 Say Y here to enable support for PNX4008 Display Update Module (DUM)
1831
1832config FB_PNX4008_DUM_RGB
1833 tristate "RGB Framebuffer support on Philips PNX4008 board"
1834 depends on FB_PNX4008_DUM
1835 select FB_CFB_FILLRECT
1836 select FB_CFB_COPYAREA
1837 select FB_CFB_IMAGEBLIT
1838 ---help---
1839 Say Y here to enable support for PNX4008 RGB Framebuffer
1840
Paul Mackerrasa3d89982006-12-10 02:20:42 -08001841config FB_IBM_GXT4500
1842 tristate "Framebuffer support for IBM GXT4500P adaptor"
Randy Dunlap0058f472007-10-16 01:29:35 -07001843 depends on FB && PPC
Paul Mackerrasa3d89982006-12-10 02:20:42 -08001844 select FB_CFB_FILLRECT
1845 select FB_CFB_COPYAREA
1846 select FB_CFB_IMAGEBLIT
1847 ---help---
1848 Say Y here to enable support for the IBM GXT4500P display
1849 adaptor, found on some IBM System P (pSeries) machines.
1850
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001851config FB_PS3
Geert Uytterhoeven9e6b99b2007-06-16 08:05:38 +10001852 tristate "PS3 GPU framebuffer driver"
1853 depends on FB && PS3_PS3AV
Geert Uytterhoeven92c45792007-05-23 13:57:50 -07001854 select FB_SYS_FILLRECT
1855 select FB_SYS_COPYAREA
1856 select FB_SYS_IMAGEBLIT
1857 select FB_SYS_FOPS
Geert Uytterhoeven23e9c942007-07-21 04:37:49 -07001858 select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001859 ---help---
1860 Include support for the virtual frame buffer in the PS3 platform.
1861
1862config FB_PS3_DEFAULT_SIZE_M
1863 int "PS3 default frame buffer size (in MiB)"
1864 depends on FB_PS3
Geert Uytterhoeven50b25292007-07-21 04:37:50 -07001865 default 9
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001866 ---help---
1867 This is the default size (in MiB) of the virtual frame buffer in
1868 the PS3.
1869 The default value can be overridden on the kernel command line
1870 using the "ps3fb" option (e.g. "ps3fb=9M");
1871
Andrei Konovalov147394c2007-05-08 00:40:18 -07001872config FB_XILINX
1873 tristate "Xilinx frame buffer support"
1874 depends on FB && XILINX_VIRTEX
1875 select FB_CFB_FILLRECT
1876 select FB_CFB_COPYAREA
1877 select FB_CFB_IMAGEBLIT
1878 ---help---
1879 Include support for the Xilinx ML300/ML403 reference design
1880 framebuffer. ML300 carries a 640*480 LCD display on the board,
1881 ML403 uses a standard DB15 VGA connector.
1882
Linus Torvalds1da177e2005-04-16 15:20:36 -07001883config FB_VIRTUAL
1884 tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
1885 depends on FB
Antonino A. Daplas87b48842007-05-08 00:39:01 -07001886 select FB_SYS_FILLRECT
1887 select FB_SYS_COPYAREA
1888 select FB_SYS_IMAGEBLIT
Antonino A. Daplas52102c02007-05-08 00:39:07 -07001889 select FB_SYS_FOPS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001890 ---help---
1891 This is a `virtual' frame buffer device. It operates on a chunk of
1892 unswappable kernel memory instead of on the memory of a graphics
1893 board. This means you cannot see any output sent to this frame
1894 buffer device, while it does consume precious memory. The main use
1895 of this frame buffer device is testing and debugging the frame
1896 buffer subsystem. Do NOT enable it for normal systems! To protect
1897 the innocent, it has to be enabled explicitly at boot time using the
1898 kernel option `video=vfb:'.
1899
1900 To compile this driver as a module, choose M here: the
Mike Frysinger66cf7512006-10-03 01:14:41 -07001901 module will be called vfb. In order to load it, you must use
1902 the vfb_enable=1 option.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001903
1904 If unsure, say N.
James Simmonse0e34ef72007-02-10 14:15:43 +00001905
Randy Dunlapf08f3892007-10-29 14:37:16 -07001906source "drivers/video/omap/Kconfig"
Randy Dunlap0058f472007-10-16 01:29:35 -07001907
Randy Dunlap179b0252007-10-16 01:29:39 -07001908source "drivers/video/backlight/Kconfig"
1909source "drivers/video/display/Kconfig"
1910
Linus Torvalds1da177e2005-04-16 15:20:36 -07001911if VT
1912 source "drivers/video/console/Kconfig"
1913endif
1914
1915if FB || SGI_NEWPORT_CONSOLE
1916 source "drivers/video/logo/Kconfig"
1917endif
1918
Linus Torvalds1da177e2005-04-16 15:20:36 -07001919endmenu