blob: f4347f88b6f2c62d73754bbee75adc416ecf8462 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* ne.c: A general non-shared-memory NS8390 ethernet driver for linux. */
2/*
3 Written 1992-94 by Donald Becker.
4
5 Copyright 1993 United States Government as represented by the
6 Director, National Security Agency.
7
8 This software may be used and distributed according to the terms
9 of the GNU General Public License, incorporated herein by reference.
10
11 The author may be reached as becker@scyld.com, or C/O
12 Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403
13
14 This driver should work with many programmed-I/O 8390-based ethernet
15 boards. Currently it supports the NE1000, NE2000, many clones,
16 and some Cabletron products.
17
18 Changelog:
19
20 Paul Gortmaker : use ENISR_RDC to monitor Tx PIO uploads, made
21 sanity checks and bad clone support optional.
22 Paul Gortmaker : new reset code, reset card after probe at boot.
23 Paul Gortmaker : multiple card support for module users.
24 Paul Gortmaker : Support for PCI ne2k clones, similar to lance.c
25 Paul Gortmaker : Allow users with bad cards to avoid full probe.
26 Paul Gortmaker : PCI probe changes, more PCI cards supported.
27 rjohnson@analogic.com : Changed init order so an interrupt will only
28 occur after memory is allocated for dev->priv. Deallocated memory
29 last in cleanup_modue()
30 Richard Guenther : Added support for ISAPnP cards
31 Paul Gortmaker : Discontinued PCI support - use ne2k-pci.c instead.
32 Hayato Fujiwara : Add m32r support.
33
34*/
35
36/* Routines for the NatSemi-based designs (NE[12]000). */
37
38static const char version1[] =
39"ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)\n";
40static const char version2[] =
41"Last modified Nov 1, 2000 by Paul Gortmaker\n";
42
43
44#include <linux/module.h>
45#include <linux/kernel.h>
46#include <linux/errno.h>
47#include <linux/isapnp.h>
48#include <linux/init.h>
49#include <linux/interrupt.h>
50#include <linux/delay.h>
51#include <linux/netdevice.h>
52#include <linux/etherdevice.h>
Marcelo Feitoza Parisiff5688a2006-01-09 18:37:15 -080053#include <linux/jiffies.h>
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +090054#include <linux/platform_device.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070055
56#include <asm/system.h>
57#include <asm/io.h>
58
59#include "8390.h"
60
61#define DRV_NAME "ne"
62
63/* Some defines that people can play with if so inclined. */
64
65/* Do we support clones that don't adhere to 14,15 of the SAprom ? */
66#define SUPPORT_NE_BAD_CLONES
David Friesfbb80232008-09-22 14:10:20 -070067/* 0xbad = bad sig or no reset ack */
68#define BAD 0xbad
69
70#define MAX_NE_CARDS 4 /* Max number of NE cards per module */
71static struct platform_device *pdev_ne[MAX_NE_CARDS];
72static int io[MAX_NE_CARDS];
73static int irq[MAX_NE_CARDS];
74static int bad[MAX_NE_CARDS];
75
76#ifdef MODULE
77module_param_array(io, int, NULL, 0);
78module_param_array(irq, int, NULL, 0);
79module_param_array(bad, int, NULL, 0);
80MODULE_PARM_DESC(io, "I/O base address(es),required");
81MODULE_PARM_DESC(irq, "IRQ number(s)");
82MODULE_PARM_DESC(bad, "Accept card(s) with bad signatures");
83MODULE_DESCRIPTION("NE1000/NE2000 ISA/PnP Ethernet driver");
84MODULE_LICENSE("GPL");
85#endif /* MODULE */
Linus Torvalds1da177e2005-04-16 15:20:36 -070086
87/* Do we perform extra sanity checks on stuff ? */
88/* #define NE_SANITY_CHECK */
89
90/* Do we implement the read before write bugfix ? */
91/* #define NE_RW_BUGFIX */
92
93/* Do we have a non std. amount of memory? (in units of 256 byte pages) */
94/* #define PACKETBUF_MEMSIZE 0x40 */
95
David Friesfbb80232008-09-22 14:10:20 -070096/* This is set up so that no ISA autoprobe takes place. We can't guarantee
97that the ne2k probe is the last 8390 based probe to take place (as it
98is at boot) and so the probe will get confused by any other 8390 cards.
99ISA device autoprobes on a running machine are not recommended anyway. */
Atsushi Nemoto1c08bf12007-05-01 00:27:49 +0900100#if !defined(MODULE) && (defined(CONFIG_ISA) || defined(CONFIG_M32R))
101/* Do we need a portlist for the ISA auto-probe ? */
102#define NEEDS_PORTLIST
103#endif
104
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105/* A zero-terminated list of I/O addresses to be probed at boot. */
Atsushi Nemoto1c08bf12007-05-01 00:27:49 +0900106#ifdef NEEDS_PORTLIST
Linus Torvalds1da177e2005-04-16 15:20:36 -0700107static unsigned int netcard_portlist[] __initdata = {
108 0x300, 0x280, 0x320, 0x340, 0x360, 0x380, 0
109};
110#endif
111
112static struct isapnp_device_id isapnp_clone_list[] __initdata = {
113 { ISAPNP_CARD_ID('A','X','E',0x2011),
114 ISAPNP_VENDOR('A','X','E'), ISAPNP_FUNCTION(0x2011),
115 (long) "NetGear EA201" },
116 { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
117 ISAPNP_VENDOR('E','D','I'), ISAPNP_FUNCTION(0x0216),
118 (long) "NN NE2000" },
119 { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
120 ISAPNP_VENDOR('P','N','P'), ISAPNP_FUNCTION(0x80d6),
121 (long) "Generic PNP" },
122 { } /* terminate list */
123};
124
125MODULE_DEVICE_TABLE(isapnp, isapnp_clone_list);
126
127#ifdef SUPPORT_NE_BAD_CLONES
128/* A list of bad clones that we none-the-less recognize. */
129static struct { const char *name8, *name16; unsigned char SAprefix[4];}
130bad_clone_list[] __initdata = {
131 {"DE100", "DE200", {0x00, 0xDE, 0x01,}},
132 {"DE120", "DE220", {0x00, 0x80, 0xc8,}},
133 {"DFI1000", "DFI2000", {'D', 'F', 'I',}}, /* Original, eh? */
134 {"EtherNext UTP8", "EtherNext UTP16", {0x00, 0x00, 0x79}},
135 {"NE1000","NE2000-invalid", {0x00, 0x00, 0xd8}}, /* Ancient real NE1000. */
136 {"NN1000", "NN2000", {0x08, 0x03, 0x08}}, /* Outlaw no-name clone. */
137 {"4-DIM8","4-DIM16", {0x00,0x00,0x4d,}}, /* Outlaw 4-Dimension cards. */
138 {"Con-Intl_8", "Con-Intl_16", {0x00, 0x00, 0x24}}, /* Connect Int'nl */
139 {"ET-100","ET-200", {0x00, 0x45, 0x54}}, /* YANG and YA clone */
140 {"COMPEX","COMPEX16",{0x00,0x80,0x48}}, /* Broken ISA Compex cards */
141 {"E-LAN100", "E-LAN200", {0x00, 0x00, 0x5d}}, /* Broken ne1000 clones */
142 {"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */
143 {"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */
Atsushi Nemotoc7e65c12008-08-08 00:55:17 +0900144#ifdef CONFIG_MACH_TX49XX
Atsushi Nemotoc5e49fb2010-03-16 05:27:40 +0000145 {"RBHMA4X00-RTL8019", "RBHMA4X00-RTL8019", {0x00, 0x60, 0x0a}}, /* Toshiba built-in */
Ralf Baechle9cc975e2005-10-10 14:51:21 +0100146#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700147 {"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */
148 {NULL,}
149};
150#endif
151
152/* ---- No user-serviceable parts below ---- */
153
154#define NE_BASE (dev->base_addr)
155#define NE_CMD 0x00
156#define NE_DATAPORT 0x10 /* NatSemi-defined port window offset. */
157#define NE_RESET 0x1f /* Issue a read to reset, a write to clear. */
158#define NE_IO_EXTENT 0x20
159
160#define NE1SM_START_PG 0x20 /* First page of TX buffer */
161#define NE1SM_STOP_PG 0x40 /* Last page +1 of RX ring */
162#define NESM_START_PG 0x40 /* First page of TX buffer */
163#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
164
Olaf Hering44456d32005-07-27 11:45:17 -0700165#if defined(CONFIG_PLAT_MAPPI)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700166# define DCR_VAL 0x4b
Sergei Shtylyovaedc0e52006-05-09 00:58:28 +0400167#elif defined(CONFIG_PLAT_OAKS32R) || \
Atsushi Nemotoc7e65c12008-08-08 00:55:17 +0900168 defined(CONFIG_MACH_TX49XX)
Sergei Shtylyovaedc0e52006-05-09 00:58:28 +0400169# define DCR_VAL 0x48 /* 8-bit mode */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700170#else
171# define DCR_VAL 0x49
172#endif
173
Atsushi Nemotof0e93c12007-05-01 00:27:39 +0900174static int ne_probe1(struct net_device *dev, unsigned long ioaddr);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700175static int ne_probe_isapnp(struct net_device *dev);
176
Linus Torvalds1da177e2005-04-16 15:20:36 -0700177static void ne_reset_8390(struct net_device *dev);
178static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
179 int ring_page);
180static void ne_block_input(struct net_device *dev, int count,
181 struct sk_buff *skb, int ring_offset);
182static void ne_block_output(struct net_device *dev, const int count,
183 const unsigned char *buf, const int start_page);
184
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400185
Linus Torvalds1da177e2005-04-16 15:20:36 -0700186/* Probe for various non-shared-memory ethercards.
187
188 NEx000-clone boards have a Station Address PROM (SAPROM) in the packet
189 buffer memory space. NE2000 clones have 0x57,0x57 in bytes 0x0e,0x0f of
190 the SAPROM, while other supposed NE2000 clones must be detected by their
191 SA prefix.
192
193 Reading the SAPROM from a word-wide card with the 8390 set in byte-wide
194 mode results in doubled values, which can be detected and compensated for.
195
196 The probe is also responsible for initializing the card and filling
197 in the 'dev' and 'ei_status' structures.
198
199 We use the minimum memory size for some ethercard product lines, iff we can't
200 distinguish models. You can increase the packet buffer size by setting
201 PACKETBUF_MEMSIZE. Reported Cabletron packet buffer locations are:
202 E1010 starts at 0x100 and ends at 0x2000.
203 E1010-x starts at 0x100 and ends at 0x8000. ("-x" means "more memory")
204 E2010 starts at 0x100 and ends at 0x4000.
205 E2010-x starts at 0x100 and ends at 0xffff. */
206
207static int __init do_ne_probe(struct net_device *dev)
208{
Atsushi Nemotof0e93c12007-05-01 00:27:39 +0900209 unsigned long base_addr = dev->base_addr;
Atsushi Nemoto1c08bf12007-05-01 00:27:49 +0900210#ifdef NEEDS_PORTLIST
Linus Torvalds1da177e2005-04-16 15:20:36 -0700211 int orig_irq = dev->irq;
212#endif
213
Linus Torvalds1da177e2005-04-16 15:20:36 -0700214 /* First check any supplied i/o locations. User knows best. <cough> */
David Friesfbb80232008-09-22 14:10:20 -0700215 if (base_addr > 0x1ff) { /* Check a single specified location. */
216 int ret = ne_probe1(dev, base_addr);
217 if (ret)
218 printk(KERN_WARNING "ne.c: No NE*000 card found at "
219 "i/o = %#lx\n", base_addr);
220 return ret;
221 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700222 else if (base_addr != 0) /* Don't probe at all. */
223 return -ENXIO;
224
225 /* Then look for any installed ISAPnP clones */
226 if (isapnp_present() && (ne_probe_isapnp(dev) == 0))
227 return 0;
228
Atsushi Nemoto1c08bf12007-05-01 00:27:49 +0900229#ifdef NEEDS_PORTLIST
Linus Torvalds1da177e2005-04-16 15:20:36 -0700230 /* Last resort. The semi-risky ISA auto-probe. */
231 for (base_addr = 0; netcard_portlist[base_addr] != 0; base_addr++) {
232 int ioaddr = netcard_portlist[base_addr];
233 dev->irq = orig_irq;
234 if (ne_probe1(dev, ioaddr) == 0)
235 return 0;
236 }
237#endif
238
239 return -ENODEV;
240}
241
Linus Torvalds1da177e2005-04-16 15:20:36 -0700242static int __init ne_probe_isapnp(struct net_device *dev)
243{
244 int i;
245
246 for (i = 0; isapnp_clone_list[i].vendor != 0; i++) {
247 struct pnp_dev *idev = NULL;
248
249 while ((idev = pnp_find_dev(NULL,
250 isapnp_clone_list[i].vendor,
251 isapnp_clone_list[i].function,
252 idev))) {
253 /* Avoid already found cards from previous calls */
254 if (pnp_device_attach(idev) < 0)
255 continue;
256 if (pnp_activate_dev(idev) < 0) {
257 pnp_device_detach(idev);
258 continue;
259 }
260 /* if no io and irq, search for next */
261 if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0)) {
262 pnp_device_detach(idev);
263 continue;
264 }
265 /* found it */
266 dev->base_addr = pnp_port_start(idev, 0);
267 dev->irq = pnp_irq(idev, 0);
268 printk(KERN_INFO "ne.c: ISAPnP reports %s at i/o %#lx, irq %d.\n",
269 (char *) isapnp_clone_list[i].driver_data,
270 dev->base_addr, dev->irq);
271 if (ne_probe1(dev, dev->base_addr) != 0) { /* Shouldn't happen. */
272 printk(KERN_ERR "ne.c: Probe of ISAPnP card at %#lx failed.\n", dev->base_addr);
273 pnp_device_detach(idev);
274 return -ENXIO;
275 }
276 ei_status.priv = (unsigned long)idev;
277 break;
278 }
279 if (!idev)
280 continue;
281 return 0;
282 }
283
284 return -ENODEV;
285}
286
Atsushi Nemotof0e93c12007-05-01 00:27:39 +0900287static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700288{
289 int i;
290 unsigned char SA_prom[32];
291 int wordlength = 2;
292 const char *name = NULL;
293 int start_page, stop_page;
294 int neX000, ctron, copam, bad_card;
295 int reg0, ret;
296 static unsigned version_printed;
297
298 if (!request_region(ioaddr, NE_IO_EXTENT, DRV_NAME))
299 return -EBUSY;
300
301 reg0 = inb_p(ioaddr);
302 if (reg0 == 0xFF) {
303 ret = -ENODEV;
304 goto err_out;
305 }
306
307 /* Do a preliminary verification that we have a 8390. */
308 {
309 int regd;
310 outb_p(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);
311 regd = inb_p(ioaddr + 0x0d);
312 outb_p(0xff, ioaddr + 0x0d);
313 outb_p(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD);
314 inb_p(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */
315 if (inb_p(ioaddr + EN0_COUNTER0) != 0) {
316 outb_p(reg0, ioaddr);
317 outb_p(regd, ioaddr + 0x0d); /* Restore the old values. */
318 ret = -ENODEV;
319 goto err_out;
320 }
321 }
322
323 if (ei_debug && version_printed++ == 0)
Joe Perchesad361c92009-07-06 13:05:40 -0700324 printk(KERN_INFO "%s%s", version1, version2);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700325
Atsushi Nemotof0e93c12007-05-01 00:27:39 +0900326 printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700327
328 /* A user with a poor card that fails to ack the reset, or that
329 does not have a valid 0x57,0x57 signature can still use this
330 without having to recompile. Specifying an i/o address along
331 with an otherwise unused dev->mem_end value of "0xBAD" will
332 cause the driver to skip these parts of the probe. */
333
David Friesfbb80232008-09-22 14:10:20 -0700334 bad_card = ((dev->base_addr != 0) && (dev->mem_end == BAD));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700335
336 /* Reset card. Who knows what dain-bramaged state it was left in. */
337
338 {
339 unsigned long reset_start_time = jiffies;
340
341 /* DON'T change these to inb_p/outb_p or reset will fail on clones. */
342 outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET);
343
344 while ((inb_p(ioaddr + EN0_ISR) & ENISR_RESET) == 0)
Marcelo Feitoza Parisiff5688a2006-01-09 18:37:15 -0800345 if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700346 if (bad_card) {
347 printk(" (warning: no reset ack)");
348 break;
349 } else {
350 printk(" not found (no reset ack).\n");
351 ret = -ENODEV;
352 goto err_out;
353 }
354 }
355
356 outb_p(0xff, ioaddr + EN0_ISR); /* Ack all intr. */
357 }
358
359 /* Read the 16 bytes of station address PROM.
Ingo Molnarf0084a32008-07-22 09:23:34 +0200360 We must first initialize registers, similar to NS8390p_init(eifdev, 0).
Linus Torvalds1da177e2005-04-16 15:20:36 -0700361 We can't reliably read the SAPROM address without this.
362 (I learned the hard way!). */
363 {
364 struct {unsigned char value, offset; } program_seq[] =
365 {
366 {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
367 {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
368 {0x00, EN0_RCNTLO}, /* Clear the count regs. */
369 {0x00, EN0_RCNTHI},
370 {0x00, EN0_IMR}, /* Mask completion irq. */
371 {0xFF, EN0_ISR},
372 {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
373 {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
374 {32, EN0_RCNTLO},
375 {0x00, EN0_RCNTHI},
376 {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
377 {0x00, EN0_RSARHI},
378 {E8390_RREAD+E8390_START, E8390_CMD},
379 };
380
Denis Chengff8ac602007-09-02 18:30:18 +0800381 for (i = 0; i < ARRAY_SIZE(program_seq); i++)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700382 outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);
383
384 }
385 for(i = 0; i < 32 /*sizeof(SA_prom)*/; i+=2) {
386 SA_prom[i] = inb(ioaddr + NE_DATAPORT);
387 SA_prom[i+1] = inb(ioaddr + NE_DATAPORT);
388 if (SA_prom[i] != SA_prom[i+1])
389 wordlength = 1;
390 }
391
392 if (wordlength == 2)
393 {
394 for (i = 0; i < 16; i++)
395 SA_prom[i] = SA_prom[i+i];
396 /* We must set the 8390 for word mode. */
397 outb_p(DCR_VAL, ioaddr + EN0_DCFG);
398 start_page = NESM_START_PG;
Sergei Shtylyovaedc0e52006-05-09 00:58:28 +0400399
400 /*
401 * Realtek RTL8019AS datasheet says that the PSTOP register
402 * shouldn't exceed 0x60 in 8-bit mode.
403 * This chip can be identified by reading the signature from
404 * the remote byte count registers (otherwise write-only)...
405 */
406 if ((DCR_VAL & 0x01) == 0 && /* 8-bit mode */
407 inb(ioaddr + EN0_RCNTLO) == 0x50 &&
408 inb(ioaddr + EN0_RCNTHI) == 0x70)
409 stop_page = 0x60;
410 else
411 stop_page = NESM_STOP_PG;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700412 } else {
413 start_page = NE1SM_START_PG;
Sergei Shtylyovaedc0e52006-05-09 00:58:28 +0400414 stop_page = NE1SM_STOP_PG;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700415 }
416
417#if defined(CONFIG_PLAT_MAPPI) || defined(CONFIG_PLAT_OAKS32R)
418 neX000 = ((SA_prom[14] == 0x57 && SA_prom[15] == 0x57)
419 || (SA_prom[14] == 0x42 && SA_prom[15] == 0x42));
420#else
421 neX000 = (SA_prom[14] == 0x57 && SA_prom[15] == 0x57);
422#endif
423 ctron = (SA_prom[0] == 0x00 && SA_prom[1] == 0x00 && SA_prom[2] == 0x1d);
424 copam = (SA_prom[14] == 0x49 && SA_prom[15] == 0x00);
425
426 /* Set up the rest of the parameters. */
427 if (neX000 || bad_card || copam) {
428 name = (wordlength == 2) ? "NE2000" : "NE1000";
429 }
430 else if (ctron)
431 {
432 name = (wordlength == 2) ? "Ctron-8" : "Ctron-16";
433 start_page = 0x01;
434 stop_page = (wordlength == 2) ? 0x40 : 0x20;
435 }
436 else
437 {
438#ifdef SUPPORT_NE_BAD_CLONES
439 /* Ack! Well, there might be a *bad* NE*000 clone there.
440 Check for total bogus addresses. */
441 for (i = 0; bad_clone_list[i].name8; i++)
442 {
443 if (SA_prom[0] == bad_clone_list[i].SAprefix[0] &&
444 SA_prom[1] == bad_clone_list[i].SAprefix[1] &&
445 SA_prom[2] == bad_clone_list[i].SAprefix[2])
446 {
447 if (wordlength == 2)
448 {
449 name = bad_clone_list[i].name16;
450 } else {
451 name = bad_clone_list[i].name8;
452 }
453 break;
454 }
455 }
456 if (bad_clone_list[i].name8 == NULL)
457 {
458 printk(" not found (invalid signature %2.2x %2.2x).\n",
459 SA_prom[14], SA_prom[15]);
460 ret = -ENXIO;
461 goto err_out;
462 }
463#else
464 printk(" not found.\n");
465 ret = -ENXIO;
466 goto err_out;
467#endif
468 }
469
470 if (dev->irq < 2)
471 {
472 unsigned long cookie = probe_irq_on();
473 outb_p(0x50, ioaddr + EN0_IMR); /* Enable one interrupt. */
474 outb_p(0x00, ioaddr + EN0_RCNTLO);
475 outb_p(0x00, ioaddr + EN0_RCNTHI);
476 outb_p(E8390_RREAD+E8390_START, ioaddr); /* Trigger it... */
477 mdelay(10); /* wait 10ms for interrupt to propagate */
478 outb_p(0x00, ioaddr + EN0_IMR); /* Mask it again. */
479 dev->irq = probe_irq_off(cookie);
480 if (ei_debug > 2)
481 printk(" autoirq is %d\n", dev->irq);
482 } else if (dev->irq == 2)
483 /* Fixup for users that don't know that IRQ 2 is really IRQ 9,
484 or don't know which one to set. */
485 dev->irq = 9;
486
487 if (! dev->irq) {
488 printk(" failed to detect IRQ line.\n");
489 ret = -EAGAIN;
490 goto err_out;
491 }
492
493 /* Snarf the interrupt now. There's no point in waiting since we cannot
494 share and the board will usually be enabled. */
Alan Cox055e5112008-07-03 23:43:12 -0700495 ret = request_irq(dev->irq, eip_interrupt, 0, name, dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700496 if (ret) {
497 printk (" unable to get IRQ %d (errno=%d).\n", dev->irq, ret);
498 goto err_out;
499 }
500
501 dev->base_addr = ioaddr;
502
503#ifdef CONFIG_PLAT_MAPPI
504 outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
505 ioaddr + E8390_CMD); /* 0x61 */
506 for (i = 0 ; i < ETHER_ADDR_LEN ; i++) {
507 dev->dev_addr[i] = SA_prom[i]
508 = inb_p(ioaddr + EN1_PHYS_SHIFT(i));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700509 }
510#else
511 for(i = 0; i < ETHER_ADDR_LEN; i++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700512 dev->dev_addr[i] = SA_prom[i];
513 }
514#endif
515
Johannes Berge1749612008-10-27 15:59:26 -0700516 printk("%pM\n", dev->dev_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700517
518 ei_status.name = name;
519 ei_status.tx_start_page = start_page;
520 ei_status.stop_page = stop_page;
Ralf Baechle9cc975e2005-10-10 14:51:21 +0100521
Sergei Shtylyovaedc0e52006-05-09 00:58:28 +0400522 /* Use 16-bit mode only if this wasn't overridden by DCR_VAL */
523 ei_status.word16 = (wordlength == 2 && (DCR_VAL & 0x01));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700524
525 ei_status.rx_start_page = start_page + TX_PAGES;
526#ifdef PACKETBUF_MEMSIZE
527 /* Allow the packet buffer size to be overridden by know-it-alls. */
528 ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE;
529#endif
530
531 ei_status.reset_8390 = &ne_reset_8390;
532 ei_status.block_input = &ne_block_input;
533 ei_status.block_output = &ne_block_output;
534 ei_status.get_8390_hdr = &ne_get_8390_hdr;
535 ei_status.priv = 0;
Stephen Hemminger4ef8e762008-11-25 18:26:38 -0800536
537 dev->netdev_ops = &eip_netdev_ops;
Mikael Petterssond02a4e32008-07-30 13:44:55 +0200538 NS8390p_init(dev, 0);
b1fc5502005-05-12 20:11:55 -0400539
540 ret = register_netdev(dev);
541 if (ret)
542 goto out_irq;
Atsushi Nemotof0e93c12007-05-01 00:27:39 +0900543 printk(KERN_INFO "%s: %s found at %#lx, using IRQ %d.\n",
544 dev->name, name, ioaddr, dev->irq);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700545 return 0;
546
b1fc5502005-05-12 20:11:55 -0400547out_irq:
548 free_irq(dev->irq, dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700549err_out:
550 release_region(ioaddr, NE_IO_EXTENT);
551 return ret;
552}
553
Linus Torvalds1da177e2005-04-16 15:20:36 -0700554/* Hard reset the card. This used to pause for the same period that a
555 8390 reset command required, but that shouldn't be necessary. */
556
557static void ne_reset_8390(struct net_device *dev)
558{
559 unsigned long reset_start_time = jiffies;
560
561 if (ei_debug > 1)
562 printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies);
563
564 /* DON'T change these to inb_p/outb_p or reset will fail on clones. */
565 outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
566
567 ei_status.txing = 0;
568 ei_status.dmaing = 0;
569
570 /* This check _should_not_ be necessary, omit eventually. */
571 while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
Marcelo Feitoza Parisiff5688a2006-01-09 18:37:15 -0800572 if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700573 printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n", dev->name);
574 break;
575 }
576 outb_p(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */
577}
578
579/* Grab the 8390 specific header. Similar to the block_input routine, but
580 we don't need to be concerned with ring wrap as the header will be at
581 the start of a page, so we optimize accordingly. */
582
583static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
584{
585 int nic_base = dev->base_addr;
586
587 /* This *shouldn't* happen. If it does, it's the last thing you'll see */
588
589 if (ei_status.dmaing)
590 {
591 printk(KERN_EMERG "%s: DMAing conflict in ne_get_8390_hdr "
592 "[DMAstat:%d][irqlock:%d].\n",
593 dev->name, ei_status.dmaing, ei_status.irqlock);
594 return;
595 }
596
597 ei_status.dmaing |= 0x01;
598 outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
599 outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
600 outb_p(0, nic_base + EN0_RCNTHI);
601 outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */
602 outb_p(ring_page, nic_base + EN0_RSARHI);
603 outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD);
604
605 if (ei_status.word16)
606 insw(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
607 else
608 insb(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr));
609
610 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
611 ei_status.dmaing &= ~0x01;
612
613 le16_to_cpus(&hdr->count);
614}
615
616/* Block input and output, similar to the Crynwr packet driver. If you
617 are porting to a new ethercard, look at the packet driver source for hints.
618 The NEx000 doesn't share the on-board packet memory -- you have to put
619 the packet out through the "remote DMA" dataport using outb. */
620
621static void ne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
622{
623#ifdef NE_SANITY_CHECK
624 int xfer_count = count;
625#endif
626 int nic_base = dev->base_addr;
627 char *buf = skb->data;
628
629 /* This *shouldn't* happen. If it does, it's the last thing you'll see */
630 if (ei_status.dmaing)
631 {
632 printk(KERN_EMERG "%s: DMAing conflict in ne_block_input "
633 "[DMAstat:%d][irqlock:%d].\n",
634 dev->name, ei_status.dmaing, ei_status.irqlock);
635 return;
636 }
637 ei_status.dmaing |= 0x01;
638 outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
639 outb_p(count & 0xff, nic_base + EN0_RCNTLO);
640 outb_p(count >> 8, nic_base + EN0_RCNTHI);
641 outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
642 outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
643 outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD);
644 if (ei_status.word16)
645 {
646 insw(NE_BASE + NE_DATAPORT,buf,count>>1);
647 if (count & 0x01)
648 {
649 buf[count-1] = inb(NE_BASE + NE_DATAPORT);
650#ifdef NE_SANITY_CHECK
651 xfer_count++;
652#endif
653 }
654 } else {
655 insb(NE_BASE + NE_DATAPORT, buf, count);
656 }
657
658#ifdef NE_SANITY_CHECK
659 /* This was for the ALPHA version only, but enough people have
660 been encountering problems so it is still here. If you see
661 this message you either 1) have a slightly incompatible clone
662 or 2) have noise/speed problems with your bus. */
663
664 if (ei_debug > 1)
665 {
666 /* DMA termination address check... */
667 int addr, tries = 20;
668 do {
669 /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here
670 -- it's broken for Rx on some cards! */
671 int high = inb_p(nic_base + EN0_RSARHI);
672 int low = inb_p(nic_base + EN0_RSARLO);
673 addr = (high << 8) + low;
674 if (((ring_offset + xfer_count) & 0xff) == low)
675 break;
676 } while (--tries > 0);
677 if (tries <= 0)
678 printk(KERN_WARNING "%s: RX transfer address mismatch,"
679 "%#4.4x (expected) vs. %#4.4x (actual).\n",
680 dev->name, ring_offset + xfer_count, addr);
681 }
682#endif
683 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
684 ei_status.dmaing &= ~0x01;
685}
686
687static void ne_block_output(struct net_device *dev, int count,
688 const unsigned char *buf, const int start_page)
689{
690 int nic_base = NE_BASE;
691 unsigned long dma_start;
692#ifdef NE_SANITY_CHECK
693 int retries = 0;
694#endif
695
696 /* Round the count up for word writes. Do we need to do this?
697 What effect will an odd byte count have on the 8390?
698 I should check someday. */
699
700 if (ei_status.word16 && (count & 0x01))
701 count++;
702
703 /* This *shouldn't* happen. If it does, it's the last thing you'll see */
704 if (ei_status.dmaing)
705 {
706 printk(KERN_EMERG "%s: DMAing conflict in ne_block_output."
707 "[DMAstat:%d][irqlock:%d]\n",
708 dev->name, ei_status.dmaing, ei_status.irqlock);
709 return;
710 }
711 ei_status.dmaing |= 0x01;
712 /* We should already be in page 0, but to be safe... */
713 outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
714
715#ifdef NE_SANITY_CHECK
716retry:
717#endif
718
719#ifdef NE8390_RW_BUGFIX
720 /* Handle the read-before-write bug the same way as the
721 Crynwr packet driver -- the NatSemi method doesn't work.
722 Actually this doesn't always work either, but if you have
723 problems with your NEx000 this is better than nothing! */
724
725 outb_p(0x42, nic_base + EN0_RCNTLO);
726 outb_p(0x00, nic_base + EN0_RCNTHI);
727 outb_p(0x42, nic_base + EN0_RSARLO);
728 outb_p(0x00, nic_base + EN0_RSARHI);
729 outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD);
730 /* Make certain that the dummy read has occurred. */
731 udelay(6);
732#endif
733
734 outb_p(ENISR_RDC, nic_base + EN0_ISR);
735
736 /* Now the normal output. */
737 outb_p(count & 0xff, nic_base + EN0_RCNTLO);
738 outb_p(count >> 8, nic_base + EN0_RCNTHI);
739 outb_p(0x00, nic_base + EN0_RSARLO);
740 outb_p(start_page, nic_base + EN0_RSARHI);
741
742 outb_p(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
743 if (ei_status.word16) {
744 outsw(NE_BASE + NE_DATAPORT, buf, count>>1);
745 } else {
746 outsb(NE_BASE + NE_DATAPORT, buf, count);
747 }
748
749 dma_start = jiffies;
750
751#ifdef NE_SANITY_CHECK
752 /* This was for the ALPHA version only, but enough people have
753 been encountering problems so it is still here. */
754
755 if (ei_debug > 1)
756 {
757 /* DMA termination address check... */
758 int addr, tries = 20;
759 do {
760 int high = inb_p(nic_base + EN0_RSARHI);
761 int low = inb_p(nic_base + EN0_RSARLO);
762 addr = (high << 8) + low;
763 if ((start_page << 8) + count == addr)
764 break;
765 } while (--tries > 0);
766
767 if (tries <= 0)
768 {
769 printk(KERN_WARNING "%s: Tx packet transfer address mismatch,"
770 "%#4.4x (expected) vs. %#4.4x (actual).\n",
771 dev->name, (start_page << 8) + count, addr);
772 if (retries++ == 0)
773 goto retry;
774 }
775 }
776#endif
777
778 while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0)
Marcelo Feitoza Parisiff5688a2006-01-09 18:37:15 -0800779 if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700780 printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
781 ne_reset_8390(dev);
Mikael Petterssond02a4e32008-07-30 13:44:55 +0200782 NS8390p_init(dev, 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700783 break;
784 }
785
786 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
787 ei_status.dmaing &= ~0x01;
788 return;
789}
790
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900791static int __init ne_drv_probe(struct platform_device *pdev)
792{
793 struct net_device *dev;
David Friesfbb80232008-09-22 14:10:20 -0700794 int err, this_dev = pdev->id;
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900795 struct resource *res;
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900796
Alan Cox055e5112008-07-03 23:43:12 -0700797 dev = alloc_eip_netdev();
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900798 if (!dev)
799 return -ENOMEM;
David Friesfbb80232008-09-22 14:10:20 -0700800
801 /* ne.c doesn't populate resources in platform_device, but
802 * rbtx4927_ne_init and rbtx4938_ne_init do register devices
803 * with resources.
804 */
805 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
806 if (res) {
807 dev->base_addr = res->start;
808 dev->irq = platform_get_irq(pdev, 0);
809 } else {
810 if (this_dev < 0 || this_dev >= MAX_NE_CARDS)
811 return -EINVAL;
812 dev->base_addr = io[this_dev];
813 dev->irq = irq[this_dev];
814 dev->mem_end = bad[this_dev];
815 }
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900816 err = do_ne_probe(dev);
817 if (err) {
818 free_netdev(dev);
819 return err;
820 }
821 platform_set_drvdata(pdev, dev);
David Friesfbb80232008-09-22 14:10:20 -0700822
823 /* Update with any values found by probing, don't update if
824 * resources were specified.
825 */
826 if (!res) {
827 io[this_dev] = dev->base_addr;
828 irq[this_dev] = dev->irq;
829 }
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900830 return 0;
831}
832
David Friesfbb80232008-09-22 14:10:20 -0700833static int ne_drv_remove(struct platform_device *pdev)
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900834{
835 struct net_device *dev = platform_get_drvdata(pdev);
836
David Friesfbb80232008-09-22 14:10:20 -0700837 if (dev) {
838 struct pnp_dev *idev = (struct pnp_dev *)ei_status.priv;
839 netif_device_detach(dev);
840 unregister_netdev(dev);
841 if (idev)
842 pnp_device_detach(idev);
843 /* Careful ne_drv_remove can be called twice, once from
844 * the platform_driver.remove and again when the
845 * platform_device is being removed.
846 */
847 ei_status.priv = 0;
848 free_irq(dev->irq, dev);
849 release_region(dev->base_addr, NE_IO_EXTENT);
850 free_netdev(dev);
851 platform_set_drvdata(pdev, NULL);
852 }
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900853 return 0;
854}
855
David Friesfbb80232008-09-22 14:10:20 -0700856/* Remove unused devices or all if true. */
857static void ne_loop_rm_unreg(int all)
858{
859 int this_dev;
860 struct platform_device *pdev;
861 for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
862 pdev = pdev_ne[this_dev];
863 /* No network device == unused */
864 if (pdev && (!platform_get_drvdata(pdev) || all)) {
865 ne_drv_remove(pdev);
866 platform_device_unregister(pdev);
867 pdev_ne[this_dev] = NULL;
868 }
869 }
870}
871
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900872#ifdef CONFIG_PM
873static int ne_drv_suspend(struct platform_device *pdev, pm_message_t state)
874{
875 struct net_device *dev = platform_get_drvdata(pdev);
876
David Fries539b06f2008-09-08 22:01:14 -0500877 if (netif_running(dev)) {
878 struct pnp_dev *idev = (struct pnp_dev *)ei_status.priv;
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900879 netif_device_detach(dev);
David Fries539b06f2008-09-08 22:01:14 -0500880 if (idev)
881 pnp_stop_dev(idev);
882 }
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900883 return 0;
884}
885
886static int ne_drv_resume(struct platform_device *pdev)
887{
888 struct net_device *dev = platform_get_drvdata(pdev);
889
890 if (netif_running(dev)) {
David Fries539b06f2008-09-08 22:01:14 -0500891 struct pnp_dev *idev = (struct pnp_dev *)ei_status.priv;
892 if (idev)
893 pnp_start_dev(idev);
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900894 ne_reset_8390(dev);
Mikael Petterssond02a4e32008-07-30 13:44:55 +0200895 NS8390p_init(dev, 1);
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900896 netif_device_attach(dev);
897 }
898 return 0;
899}
900#else
901#define ne_drv_suspend NULL
902#define ne_drv_resume NULL
903#endif
904
905static struct platform_driver ne_driver = {
David Friesfbb80232008-09-22 14:10:20 -0700906 .remove = ne_drv_remove,
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900907 .suspend = ne_drv_suspend,
908 .resume = ne_drv_resume,
909 .driver = {
910 .name = DRV_NAME,
911 .owner = THIS_MODULE,
912 },
913};
914
David Friesfbb80232008-09-22 14:10:20 -0700915static void __init ne_add_devices(void)
916{
917 int this_dev;
918 struct platform_device *pdev;
919
920 for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
921 if (pdev_ne[this_dev])
922 continue;
923 pdev = platform_device_register_simple(
924 DRV_NAME, this_dev, NULL, 0);
925 if (IS_ERR(pdev))
926 continue;
927 pdev_ne[this_dev] = pdev;
928 }
929}
930
931#ifdef MODULE
Hannes Eder2705d4f2008-12-25 23:52:57 -0800932int __init init_module(void)
David Friesfbb80232008-09-22 14:10:20 -0700933{
934 int retval;
935 ne_add_devices();
936 retval = platform_driver_probe(&ne_driver, ne_drv_probe);
937 if (retval) {
938 if (io[0] == 0)
939 printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\""
940 " value(s) for ISA cards.\n");
941 ne_loop_rm_unreg(1);
942 return retval;
943 }
944
945 /* Unregister unused platform_devices. */
946 ne_loop_rm_unreg(0);
947 return retval;
948}
949#else /* MODULE */
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900950static int __init ne_init(void)
951{
David Friesfbb80232008-09-22 14:10:20 -0700952 int retval = platform_driver_probe(&ne_driver, ne_drv_probe);
953
954 /* Unregister unused platform_devices. */
955 ne_loop_rm_unreg(0);
956 return retval;
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +0900957}
David Friesfbb80232008-09-22 14:10:20 -0700958module_init(ne_init);
959
960struct net_device * __init ne_probe(int unit)
961{
962 int this_dev;
963 struct net_device *dev;
964
965 /* Find an empty slot, that is no net_device and zero io port. */
966 this_dev = 0;
967 while ((pdev_ne[this_dev] && platform_get_drvdata(pdev_ne[this_dev])) ||
968 io[this_dev]) {
969 if (++this_dev == MAX_NE_CARDS)
970 return ERR_PTR(-ENOMEM);
971 }
972
973 /* Get irq, io from kernel command line */
974 dev = alloc_eip_netdev();
975 if (!dev)
976 return ERR_PTR(-ENOMEM);
977
978 sprintf(dev->name, "eth%d", unit);
979 netdev_boot_setup_check(dev);
980
981 io[this_dev] = dev->base_addr;
982 irq[this_dev] = dev->irq;
983 bad[this_dev] = dev->mem_end;
984
985 free_netdev(dev);
986
987 ne_add_devices();
988
989 /* return the first device found */
990 for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
991 if (pdev_ne[this_dev]) {
992 dev = platform_get_drvdata(pdev_ne[this_dev]);
993 if (dev)
994 return dev;
995 }
996 }
997
998 return ERR_PTR(-ENODEV);
999}
1000#endif /* MODULE */
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +09001001
1002static void __exit ne_exit(void)
1003{
1004 platform_driver_unregister(&ne_driver);
David Friesfbb80232008-09-22 14:10:20 -07001005 ne_loop_rm_unreg(1);
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +09001006}
Atsushi Nemotoa4d542b2007-05-01 00:27:31 +09001007module_exit(ne_exit);