blob: e4cdf78cc3e96a4f05522ba8038610ad7c80759c [file] [log] [blame]
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +02001#include <linux/types.h>
2#include <linux/kernel.h>
3#include <linux/ide.h>
4#include <linux/scatterlist.h>
5#include <linux/dma-mapping.h>
6#include <linux/io.h>
7
8/**
9 * config_drive_for_dma - attempt to activate IDE DMA
10 * @drive: the drive to place in DMA mode
11 *
12 * If the drive supports at least mode 2 DMA or UDMA of any kind
13 * then attempt to place it into DMA mode. Drives that are known to
14 * support DMA but predate the DMA properties or that are known
15 * to have DMA handling bugs are also set up appropriately based
16 * on the good/bad drive lists.
17 */
18
19int config_drive_for_dma(ide_drive_t *drive)
20{
21 ide_hwif_t *hwif = drive->hwif;
22 u16 *id = drive->id;
23
24 if (drive->media != ide_disk) {
25 if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA)
26 return 0;
27 }
28
29 /*
30 * Enable DMA on any drive that has
31 * UltraDMA (mode 0/1/2/3/4/5/6) enabled
32 */
33 if ((id[ATA_ID_FIELD_VALID] & 4) &&
34 ((id[ATA_ID_UDMA_MODES] >> 8) & 0x7f))
35 return 1;
36
37 /*
38 * Enable DMA on any drive that has mode2 DMA
39 * (multi or single) enabled
40 */
Sergei Shtylyov8d64fcd2009-03-31 20:15:27 +020041 if ((id[ATA_ID_MWDMA_MODES] & 0x404) == 0x404 ||
42 (id[ATA_ID_SWDMA_MODES] & 0x404) == 0x404)
43 return 1;
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +020044
45 /* Consult the list of known "good" drives */
46 if (ide_dma_good_drive(drive))
47 return 1;
48
49 return 0;
50}
51
Sergei Shtylyov592b5312009-01-06 17:21:02 +010052u8 ide_dma_sff_read_status(ide_hwif_t *hwif)
53{
54 unsigned long addr = hwif->dma_base + ATA_DMA_STATUS;
55
56 if (hwif->host_flags & IDE_HFLAG_MMIO)
57 return readb((void __iomem *)addr);
58 else
59 return inb(addr);
60}
61EXPORT_SYMBOL_GPL(ide_dma_sff_read_status);
62
Sergei Shtylyov05789632009-01-06 17:21:02 +010063static void ide_dma_sff_write_status(ide_hwif_t *hwif, u8 val)
64{
65 unsigned long addr = hwif->dma_base + ATA_DMA_STATUS;
66
67 if (hwif->host_flags & IDE_HFLAG_MMIO)
68 writeb(val, (void __iomem *)addr);
69 else
70 outb(val, addr);
71}
72
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +020073/**
74 * ide_dma_host_set - Enable/disable DMA on a host
75 * @drive: drive to control
76 *
77 * Enable/disable DMA on an IDE controller following generic
78 * bus-mastering IDE controller behaviour.
79 */
80
81void ide_dma_host_set(ide_drive_t *drive, int on)
82{
83 ide_hwif_t *hwif = drive->hwif;
84 u8 unit = drive->dn & 1;
Sergei Shtylyov592b5312009-01-06 17:21:02 +010085 u8 dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +020086
87 if (on)
88 dma_stat |= (1 << (5 + unit));
89 else
90 dma_stat &= ~(1 << (5 + unit));
91
Sergei Shtylyov05789632009-01-06 17:21:02 +010092 ide_dma_sff_write_status(hwif, dma_stat);
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +020093}
94EXPORT_SYMBOL_GPL(ide_dma_host_set);
95
96/**
97 * ide_build_dmatable - build IDE DMA table
98 *
99 * ide_build_dmatable() prepares a dma request. We map the command
100 * to get the pci bus addresses of the buffers and then build up
101 * the PRD table that the IDE layer wants to be fed.
102 *
103 * Most chipsets correctly interpret a length of 0x0000 as 64KB,
104 * but at least one (e.g. CS5530) misinterprets it as zero (!).
105 * So we break the 64KB entry into two 32KB entries instead.
106 *
107 * Returns the number of built PRD entries if all went okay,
108 * returns 0 otherwise.
109 *
110 * May also be invoked from trm290.c
111 */
112
Bartlomiej Zolnierkiewicz229816942009-03-27 12:46:46 +0100113int ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200114{
115 ide_hwif_t *hwif = drive->hwif;
116 __le32 *table = (__le32 *)hwif->dmatable_cpu;
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200117 unsigned int count = 0;
118 int i;
119 struct scatterlist *sg;
Bartlomiej Zolnierkiewicz1f660192008-12-29 20:27:34 +0100120 u8 is_trm290 = !!(hwif->host_flags & IDE_HFLAG_TRM290);
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200121
Bartlomiej Zolnierkiewicz229816942009-03-27 12:46:46 +0100122 for_each_sg(hwif->sg_table, sg, cmd->sg_nents, i) {
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200123 u32 cur_addr, cur_len, xcount, bcount;
124
125 cur_addr = sg_dma_address(sg);
126 cur_len = sg_dma_len(sg);
127
128 /*
129 * Fill in the dma table, without crossing any 64kB boundaries.
130 * Most hardware requires 16-bit alignment of all blocks,
131 * but the trm290 requires 32-bit alignment.
132 */
133
134 while (cur_len) {
135 if (count++ >= PRD_ENTRIES)
136 goto use_pio_instead;
137
138 bcount = 0x10000 - (cur_addr & 0xffff);
139 if (bcount > cur_len)
140 bcount = cur_len;
141 *table++ = cpu_to_le32(cur_addr);
142 xcount = bcount & 0xffff;
143 if (is_trm290)
144 xcount = ((xcount >> 2) - 1) << 16;
Bartlomiej Zolnierkiewicz769b49c2008-10-17 18:09:18 +0200145 else if (xcount == 0x0000) {
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200146 if (count++ >= PRD_ENTRIES)
147 goto use_pio_instead;
148 *table++ = cpu_to_le32(0x8000);
149 *table++ = cpu_to_le32(cur_addr + 0x8000);
150 xcount = 0x8000;
151 }
152 *table++ = cpu_to_le32(xcount);
153 cur_addr += bcount;
154 cur_len -= bcount;
155 }
156 }
157
158 if (count) {
159 if (!is_trm290)
160 *--table |= cpu_to_le32(0x80000000);
161 return count;
162 }
163
164use_pio_instead:
165 printk(KERN_ERR "%s: %s\n", drive->name,
166 count ? "DMA table too small" : "empty DMA table?");
167
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200168 return 0; /* revert to PIO for this request */
169}
170EXPORT_SYMBOL_GPL(ide_build_dmatable);
171
172/**
173 * ide_dma_setup - begin a DMA phase
174 * @drive: target device
Bartlomiej Zolnierkiewicz229816942009-03-27 12:46:46 +0100175 * @cmd: command
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200176 *
177 * Build an IDE DMA PRD (IDE speak for scatter gather table)
178 * and then set up the DMA transfer registers for a device
179 * that follows generic IDE PCI DMA behaviour. Controllers can
180 * override this function if they need to
181 *
182 * Returns 0 on success. If a PIO fallback is required then 1
183 * is returned.
184 */
185
Bartlomiej Zolnierkiewicz229816942009-03-27 12:46:46 +0100186int ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200187{
188 ide_hwif_t *hwif = drive->hwif;
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200189 u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
Bartlomiej Zolnierkiewicz229816942009-03-27 12:46:46 +0100190 u8 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR;
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200191 u8 dma_stat;
192
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200193 /* fall back to pio! */
Bartlomiej Zolnierkiewicz229816942009-03-27 12:46:46 +0100194 if (ide_build_dmatable(drive, cmd) == 0) {
195 ide_map_sg(drive, cmd);
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200196 return 1;
197 }
198
199 /* PRD table */
Sergei Shtylyov05789632009-01-06 17:21:02 +0100200 if (mmio)
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200201 writel(hwif->dmatable_dma,
202 (void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS));
203 else
204 outl(hwif->dmatable_dma, hwif->dma_base + ATA_DMA_TABLE_OFS);
205
206 /* specify r/w */
207 if (mmio)
Bartlomiej Zolnierkiewicz229816942009-03-27 12:46:46 +0100208 writeb(rw, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200209 else
Bartlomiej Zolnierkiewicz229816942009-03-27 12:46:46 +0100210 outb(rw, hwif->dma_base + ATA_DMA_CMD);
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200211
212 /* read DMA status for INTR & ERROR flags */
Sergei Shtylyov592b5312009-01-06 17:21:02 +0100213 dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200214
215 /* clear INTR & ERROR flags */
Sergei Shtylyov05789632009-01-06 17:21:02 +0100216 ide_dma_sff_write_status(hwif, dma_stat | ATA_DMA_ERR | ATA_DMA_INTR);
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200217
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200218 return 0;
219}
220EXPORT_SYMBOL_GPL(ide_dma_setup);
221
222/**
Bartlomiej Zolnierkiewicz22117d62009-03-27 12:46:47 +0100223 * ide_dma_sff_timer_expiry - handle a DMA timeout
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200224 * @drive: Drive that timed out
225 *
226 * An IDE DMA transfer timed out. In the event of an error we ask
227 * the driver to resolve the problem, if a DMA transfer is still
228 * in progress we continue to wait (arguably we need to add a
229 * secondary 'I don't care what the drive thinks' timeout here)
230 * Finally if we have an interrupt we let it complete the I/O.
231 * But only one time - we clear expiry and if it's still not
232 * completed after WAIT_CMD, we error and retry in PIO.
233 * This can occur if an interrupt is lost or due to hang or bugs.
234 */
235
Bartlomiej Zolnierkiewicz22117d62009-03-27 12:46:47 +0100236int ide_dma_sff_timer_expiry(ide_drive_t *drive)
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200237{
238 ide_hwif_t *hwif = drive->hwif;
Sergei Shtylyov592b5312009-01-06 17:21:02 +0100239 u8 dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200240
241 printk(KERN_WARNING "%s: %s: DMA status (0x%02x)\n",
242 drive->name, __func__, dma_stat);
243
244 if ((dma_stat & 0x18) == 0x18) /* BUSY Stupid Early Timer !! */
245 return WAIT_CMD;
246
Bartlomiej Zolnierkiewiczb65fac32009-01-06 17:20:50 +0100247 hwif->expiry = NULL; /* one free ride for now */
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200248
Bartlomiej Zolnierkiewicz1d353642008-12-29 20:27:37 +0100249 if (dma_stat & ATA_DMA_ERR) /* ERROR */
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200250 return -1;
251
Bartlomiej Zolnierkiewicz1d353642008-12-29 20:27:37 +0100252 if (dma_stat & ATA_DMA_ACTIVE) /* DMAing */
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200253 return WAIT_CMD;
254
Bartlomiej Zolnierkiewicz1d353642008-12-29 20:27:37 +0100255 if (dma_stat & ATA_DMA_INTR) /* Got an Interrupt */
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200256 return WAIT_CMD;
257
258 return 0; /* Status is unknown -- reset the bus */
259}
Bartlomiej Zolnierkiewicz22117d62009-03-27 12:46:47 +0100260EXPORT_SYMBOL_GPL(ide_dma_sff_timer_expiry);
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200261
262void ide_dma_start(ide_drive_t *drive)
263{
264 ide_hwif_t *hwif = drive->hwif;
265 u8 dma_cmd;
266
267 /* Note that this is done *after* the cmd has
268 * been issued to the drive, as per the BM-IDE spec.
269 * The Promise Ultra33 doesn't work correctly when
270 * we do this part before issuing the drive cmd.
271 */
272 if (hwif->host_flags & IDE_HFLAG_MMIO) {
273 dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
Bartlomiej Zolnierkiewicz1d353642008-12-29 20:27:37 +0100274 writeb(dma_cmd | ATA_DMA_START,
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200275 (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
276 } else {
277 dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
Bartlomiej Zolnierkiewicz1d353642008-12-29 20:27:37 +0100278 outb(dma_cmd | ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD);
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200279 }
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200280}
281EXPORT_SYMBOL_GPL(ide_dma_start);
282
283/* returns 1 on error, 0 otherwise */
284int ide_dma_end(ide_drive_t *drive)
285{
286 ide_hwif_t *hwif = drive->hwif;
Grant Grundleredafcf72009-04-08 14:12:49 +0200287 u8 dma_stat = 0, dma_cmd = 0;
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200288
Bartlomiej Zolnierkiewicz1d353642008-12-29 20:27:37 +0100289 /* stop DMA */
Sergei Shtylyov05789632009-01-06 17:21:02 +0100290 if (hwif->host_flags & IDE_HFLAG_MMIO) {
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200291 dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
Bartlomiej Zolnierkiewicz1d353642008-12-29 20:27:37 +0100292 writeb(dma_cmd & ~ATA_DMA_START,
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200293 (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
294 } else {
295 dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
Bartlomiej Zolnierkiewicz1d353642008-12-29 20:27:37 +0100296 outb(dma_cmd & ~ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD);
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200297 }
298
299 /* get DMA status */
Sergei Shtylyov592b5312009-01-06 17:21:02 +0100300 dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200301
Sergei Shtylyov05789632009-01-06 17:21:02 +0100302 /* clear INTR & ERROR bits */
303 ide_dma_sff_write_status(hwif, dma_stat | ATA_DMA_ERR | ATA_DMA_INTR);
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200304
Grant Grundleredafcf72009-04-08 14:12:49 +0200305#define CHECK_DMA_MASK (ATA_DMA_ACTIVE | ATA_DMA_ERR | ATA_DMA_INTR)
Bartlomiej Zolnierkiewicz1d353642008-12-29 20:27:37 +0100306
307 /* verify good DMA status */
Grant Grundleredafcf72009-04-08 14:12:49 +0200308 if ((dma_stat & CHECK_DMA_MASK) != ATA_DMA_INTR)
Bartlomiej Zolnierkiewicz1d353642008-12-29 20:27:37 +0100309 return 0x10 | dma_stat;
310 return 0;
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200311}
312EXPORT_SYMBOL_GPL(ide_dma_end);
313
314/* returns 1 if dma irq issued, 0 otherwise */
315int ide_dma_test_irq(ide_drive_t *drive)
316{
317 ide_hwif_t *hwif = drive->hwif;
Sergei Shtylyov592b5312009-01-06 17:21:02 +0100318 u8 dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200319
Bartlomiej Zolnierkiewicz1d353642008-12-29 20:27:37 +0100320 return (dma_stat & ATA_DMA_INTR) ? 1 : 0;
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200321}
322EXPORT_SYMBOL_GPL(ide_dma_test_irq);
323
324const struct ide_dma_ops sff_dma_ops = {
325 .dma_host_set = ide_dma_host_set,
326 .dma_setup = ide_dma_setup,
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200327 .dma_start = ide_dma_start,
328 .dma_end = ide_dma_end,
329 .dma_test_irq = ide_dma_test_irq,
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200330 .dma_lost_irq = ide_dma_lost_irq,
Bartlomiej Zolnierkiewicz35c9b4d2009-03-31 20:15:19 +0200331 .dma_timer_expiry = ide_dma_sff_timer_expiry,
Sergei Shtylyov592b5312009-01-06 17:21:02 +0100332 .dma_sff_read_status = ide_dma_sff_read_status,
Bartlomiej Zolnierkiewicz2dbe7e92008-10-13 21:39:47 +0200333};
334EXPORT_SYMBOL_GPL(sff_dma_ops);