blob: d9ddf4122f37e6ddfd19661eb9cb1448306525b6 [file] [log] [blame]
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +03001/*
2 * Texas Instruments DA8xx/OMAP-L1x "glue layer"
3 *
4 * Copyright (c) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
5 *
6 * Based on the DaVinci "glue layer" code.
7 * Copyright (C) 2005-2006 by Texas Instruments
8 *
9 * This file is part of the Inventra Controller Driver for Linux.
10 *
11 * The Inventra Controller Driver for Linux is free software; you
12 * can redistribute it and/or modify it under the terms of the GNU
13 * General Public License version 2 as published by the Free Software
14 * Foundation.
15 *
16 * The Inventra Controller Driver for Linux is distributed in
17 * the hope that it will be useful, but WITHOUT ANY WARRANTY;
18 * without even the implied warranty of MERCHANTABILITY or
19 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
20 * License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with The Inventra Controller Driver for Linux ; if not,
24 * write to the Free Software Foundation, Inc., 59 Temple Place,
25 * Suite 330, Boston, MA 02111-1307 USA
26 *
27 */
28
29#include <linux/init.h>
Felipe Balbiab570da2011-11-10 09:58:04 +020030#include <linux/module.h>
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +030031#include <linux/clk.h>
Kishon Vijay Abraham Ided017e2012-06-26 17:40:32 +053032#include <linux/err.h>
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +030033#include <linux/io.h>
Felipe Balbi8ceae512010-12-02 09:19:35 +020034#include <linux/platform_device.h>
35#include <linux/dma-mapping.h>
Sebastian Andrzej Siewior3fa4d732013-07-26 12:16:42 +020036#include <linux/usb/usb_phy_gen_xceiv.h>
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +030037
38#include <mach/da8xx.h>
Arnd Bergmannec2a0832012-08-24 15:11:34 +020039#include <linux/platform_data/usb-davinci.h>
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +030040
41#include "musb_core.h"
42
43/*
44 * DA8XX specific definitions
45 */
46
47/* USB 2.0 OTG module registers */
48#define DA8XX_USB_REVISION_REG 0x00
49#define DA8XX_USB_CTRL_REG 0x04
50#define DA8XX_USB_STAT_REG 0x08
51#define DA8XX_USB_EMULATION_REG 0x0c
52#define DA8XX_USB_MODE_REG 0x10 /* Transparent, CDC, [Generic] RNDIS */
53#define DA8XX_USB_AUTOREQ_REG 0x14
54#define DA8XX_USB_SRP_FIX_TIME_REG 0x18
55#define DA8XX_USB_TEARDOWN_REG 0x1c
56#define DA8XX_USB_INTR_SRC_REG 0x20
57#define DA8XX_USB_INTR_SRC_SET_REG 0x24
58#define DA8XX_USB_INTR_SRC_CLEAR_REG 0x28
59#define DA8XX_USB_INTR_MASK_REG 0x2c
60#define DA8XX_USB_INTR_MASK_SET_REG 0x30
61#define DA8XX_USB_INTR_MASK_CLEAR_REG 0x34
62#define DA8XX_USB_INTR_SRC_MASKED_REG 0x38
63#define DA8XX_USB_END_OF_INTR_REG 0x3c
64#define DA8XX_USB_GENERIC_RNDIS_EP_SIZE_REG(n) (0x50 + (((n) - 1) << 2))
65
66/* Control register bits */
67#define DA8XX_SOFT_RESET_MASK 1
68
69#define DA8XX_USB_TX_EP_MASK 0x1f /* EP0 + 4 Tx EPs */
70#define DA8XX_USB_RX_EP_MASK 0x1e /* 4 Rx EPs */
71
72/* USB interrupt register bits */
73#define DA8XX_INTR_USB_SHIFT 16
74#define DA8XX_INTR_USB_MASK (0x1ff << DA8XX_INTR_USB_SHIFT) /* 8 Mentor */
75 /* interrupts and DRVVBUS interrupt */
76#define DA8XX_INTR_DRVVBUS 0x100
77#define DA8XX_INTR_RX_SHIFT 8
78#define DA8XX_INTR_RX_MASK (DA8XX_USB_RX_EP_MASK << DA8XX_INTR_RX_SHIFT)
79#define DA8XX_INTR_TX_SHIFT 0
80#define DA8XX_INTR_TX_MASK (DA8XX_USB_TX_EP_MASK << DA8XX_INTR_TX_SHIFT)
81
82#define DA8XX_MENTOR_CORE_OFFSET 0x400
83
84#define CFGCHIP2 IO_ADDRESS(DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP2_REG)
85
Felipe Balbie6480fa2010-12-02 09:40:34 +020086struct da8xx_glue {
87 struct device *dev;
88 struct platform_device *musb;
Felipe Balbi03491762010-12-02 09:57:08 +020089 struct clk *clk;
Felipe Balbie6480fa2010-12-02 09:40:34 +020090};
91
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +030092/*
93 * REVISIT (PM): we should be able to keep the PHY in low power mode most
94 * of the time (24 MHz oscillator and PLL off, etc.) by setting POWER.D0
95 * and, when in host mode, autosuspending idle root ports... PHY_PLLON
96 * (overriding SUSPENDM?) then likely needs to stay off.
97 */
98
99static inline void phy_on(void)
100{
101 u32 cfgchip2 = __raw_readl(CFGCHIP2);
102
103 /*
104 * Start the on-chip PHY and its PLL.
105 */
106 cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN);
107 cfgchip2 |= CFGCHIP2_PHY_PLLON;
108 __raw_writel(cfgchip2, CFGCHIP2);
109
110 pr_info("Waiting for USB PHY clock good...\n");
111 while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD))
112 cpu_relax();
113}
114
115static inline void phy_off(void)
116{
117 u32 cfgchip2 = __raw_readl(CFGCHIP2);
118
119 /*
120 * Ensure that USB 1.1 reference clock is not being sourced from
121 * USB 2.0 PHY. Otherwise do not power down the PHY.
122 */
123 if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX) &&
124 (cfgchip2 & CFGCHIP2_USB1SUSPENDM)) {
125 pr_warning("USB 1.1 clocked from USB 2.0 PHY -- "
126 "can't power it down\n");
127 return;
128 }
129
130 /*
131 * Power down the on-chip PHY.
132 */
133 cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN;
134 __raw_writel(cfgchip2, CFGCHIP2);
135}
136
137/*
138 * Because we don't set CTRL.UINT, it's "important" to:
139 * - not read/write INTRUSB/INTRUSBE (except during
140 * initial setup, as a workaround);
141 * - use INTSET/INTCLR instead.
142 */
143
144/**
Felipe Balbi743411b2010-12-01 13:22:05 +0200145 * da8xx_musb_enable - enable interrupts
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300146 */
Felipe Balbi743411b2010-12-01 13:22:05 +0200147static void da8xx_musb_enable(struct musb *musb)
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300148{
149 void __iomem *reg_base = musb->ctrl_base;
150 u32 mask;
151
152 /* Workaround: setup IRQs through both register sets. */
153 mask = ((musb->epmask & DA8XX_USB_TX_EP_MASK) << DA8XX_INTR_TX_SHIFT) |
154 ((musb->epmask & DA8XX_USB_RX_EP_MASK) << DA8XX_INTR_RX_SHIFT) |
155 DA8XX_INTR_USB_MASK;
156 musb_writel(reg_base, DA8XX_USB_INTR_MASK_SET_REG, mask);
157
158 /* Force the DRVVBUS IRQ so we can start polling for ID change. */
Felipe Balbi032ec492011-11-24 15:46:26 +0200159 musb_writel(reg_base, DA8XX_USB_INTR_SRC_SET_REG,
160 DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT);
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300161}
162
163/**
Felipe Balbi743411b2010-12-01 13:22:05 +0200164 * da8xx_musb_disable - disable HDRC and flush interrupts
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300165 */
Felipe Balbi743411b2010-12-01 13:22:05 +0200166static void da8xx_musb_disable(struct musb *musb)
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300167{
168 void __iomem *reg_base = musb->ctrl_base;
169
170 musb_writel(reg_base, DA8XX_USB_INTR_MASK_CLEAR_REG,
171 DA8XX_INTR_USB_MASK |
172 DA8XX_INTR_TX_MASK | DA8XX_INTR_RX_MASK);
173 musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
174 musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
175}
176
Felipe Balbi62285962011-06-22 17:28:09 +0300177#define portstate(stmt) stmt
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300178
Felipe Balbi743411b2010-12-01 13:22:05 +0200179static void da8xx_musb_set_vbus(struct musb *musb, int is_on)
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300180{
181 WARN_ON(is_on && is_peripheral_active(musb));
182}
183
184#define POLL_SECONDS 2
185
186static struct timer_list otg_workaround;
187
188static void otg_timer(unsigned long _musb)
189{
190 struct musb *musb = (void *)_musb;
191 void __iomem *mregs = musb->mregs;
192 u8 devctl;
193 unsigned long flags;
194
195 /*
196 * We poll because DaVinci's won't expose several OTG-critical
197 * status change events (from the transceiver) otherwise.
198 */
199 devctl = musb_readb(mregs, MUSB_DEVCTL);
Felipe Balbi5c8a86e2011-05-11 12:44:08 +0300200 dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
Felipe Balbi42c0bf12013-03-07 10:39:57 +0200201 usb_otg_state_string(musb->xceiv->state));
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300202
203 spin_lock_irqsave(&musb->lock, flags);
204 switch (musb->xceiv->state) {
205 case OTG_STATE_A_WAIT_BCON:
206 devctl &= ~MUSB_DEVCTL_SESSION;
207 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
208
209 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
210 if (devctl & MUSB_DEVCTL_BDEVICE) {
211 musb->xceiv->state = OTG_STATE_B_IDLE;
212 MUSB_DEV_MODE(musb);
213 } else {
214 musb->xceiv->state = OTG_STATE_A_IDLE;
215 MUSB_HST_MODE(musb);
216 }
217 break;
218 case OTG_STATE_A_WAIT_VFALL:
219 /*
220 * Wait till VBUS falls below SessionEnd (~0.2 V); the 1.3
221 * RTL seems to mis-handle session "start" otherwise (or in
222 * our case "recover"), in routine "VBUS was valid by the time
223 * VBUSERR got reported during enumeration" cases.
224 */
225 if (devctl & MUSB_DEVCTL_VBUS) {
226 mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
227 break;
228 }
229 musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
230 musb_writel(musb->ctrl_base, DA8XX_USB_INTR_SRC_SET_REG,
231 MUSB_INTR_VBUSERROR << DA8XX_INTR_USB_SHIFT);
232 break;
233 case OTG_STATE_B_IDLE:
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300234 /*
235 * There's no ID-changed IRQ, so we have no good way to tell
236 * when to switch to the A-Default state machine (by setting
237 * the DEVCTL.Session bit).
238 *
239 * Workaround: whenever we're in B_IDLE, try setting the
240 * session flag every few seconds. If it works, ID was
241 * grounded and we're now in the A-Default state machine.
242 *
243 * NOTE: setting the session flag is _supposed_ to trigger
244 * SRP but clearly it doesn't.
245 */
246 musb_writeb(mregs, MUSB_DEVCTL, devctl | MUSB_DEVCTL_SESSION);
247 devctl = musb_readb(mregs, MUSB_DEVCTL);
248 if (devctl & MUSB_DEVCTL_BDEVICE)
249 mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
250 else
251 musb->xceiv->state = OTG_STATE_A_IDLE;
252 break;
253 default:
254 break;
255 }
256 spin_unlock_irqrestore(&musb->lock, flags);
257}
258
Felipe Balbi743411b2010-12-01 13:22:05 +0200259static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300260{
261 static unsigned long last_timer;
262
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300263 if (timeout == 0)
264 timeout = jiffies + msecs_to_jiffies(3);
265
266 /* Never idle if active, or when VBUS timeout is not set as host */
267 if (musb->is_active || (musb->a_wait_bcon == 0 &&
268 musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
Felipe Balbi5c8a86e2011-05-11 12:44:08 +0300269 dev_dbg(musb->controller, "%s active, deleting timer\n",
Felipe Balbi42c0bf12013-03-07 10:39:57 +0200270 usb_otg_state_string(musb->xceiv->state));
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300271 del_timer(&otg_workaround);
272 last_timer = jiffies;
273 return;
274 }
275
276 if (time_after(last_timer, timeout) && timer_pending(&otg_workaround)) {
Felipe Balbi5c8a86e2011-05-11 12:44:08 +0300277 dev_dbg(musb->controller, "Longer idle timer already pending, ignoring...\n");
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300278 return;
279 }
280 last_timer = timeout;
281
Felipe Balbi5c8a86e2011-05-11 12:44:08 +0300282 dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
Felipe Balbi42c0bf12013-03-07 10:39:57 +0200283 usb_otg_state_string(musb->xceiv->state),
Anatolij Gustschin3df00452011-05-05 12:11:21 +0200284 jiffies_to_msecs(timeout - jiffies));
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300285 mod_timer(&otg_workaround, timeout);
286}
287
Felipe Balbi743411b2010-12-01 13:22:05 +0200288static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300289{
290 struct musb *musb = hci;
291 void __iomem *reg_base = musb->ctrl_base;
Heikki Krogerusd445b6d2012-02-13 13:24:15 +0200292 struct usb_otg *otg = musb->xceiv->otg;
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300293 unsigned long flags;
294 irqreturn_t ret = IRQ_NONE;
295 u32 status;
296
297 spin_lock_irqsave(&musb->lock, flags);
298
299 /*
300 * NOTE: DA8XX shadows the Mentor IRQs. Don't manage them through
301 * the Mentor registers (except for setup), use the TI ones and EOI.
302 */
303
304 /* Acknowledge and handle non-CPPI interrupts */
305 status = musb_readl(reg_base, DA8XX_USB_INTR_SRC_MASKED_REG);
306 if (!status)
307 goto eoi;
308
309 musb_writel(reg_base, DA8XX_USB_INTR_SRC_CLEAR_REG, status);
Felipe Balbi5c8a86e2011-05-11 12:44:08 +0300310 dev_dbg(musb->controller, "USB IRQ %08x\n", status);
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300311
312 musb->int_rx = (status & DA8XX_INTR_RX_MASK) >> DA8XX_INTR_RX_SHIFT;
313 musb->int_tx = (status & DA8XX_INTR_TX_MASK) >> DA8XX_INTR_TX_SHIFT;
314 musb->int_usb = (status & DA8XX_INTR_USB_MASK) >> DA8XX_INTR_USB_SHIFT;
315
316 /*
317 * DRVVBUS IRQs are the only proxy we have (a very poor one!) for
318 * DA8xx's missing ID change IRQ. We need an ID change IRQ to
319 * switch appropriately between halves of the OTG state machine.
320 * Managing DEVCTL.Session per Mentor docs requires that we know its
321 * value but DEVCTL.BDevice is invalid without DEVCTL.Session set.
322 * Also, DRVVBUS pulses for SRP (but not at 5 V)...
323 */
324 if (status & (DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT)) {
325 int drvvbus = musb_readl(reg_base, DA8XX_USB_STAT_REG);
326 void __iomem *mregs = musb->mregs;
327 u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
328 int err;
329
Mikhail Kshevetskiydb9e5162013-03-14 10:18:29 +0100330 err = musb->int_usb & MUSB_INTR_VBUSERROR;
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300331 if (err) {
332 /*
333 * The Mentor core doesn't debounce VBUS as needed
334 * to cope with device connect current spikes. This
335 * means it's not uncommon for bus-powered devices
336 * to get VBUS errors during enumeration.
337 *
338 * This is a workaround, but newer RTL from Mentor
339 * seems to allow a better one: "re"-starting sessions
340 * without waiting for VBUS to stop registering in
341 * devctl.
342 */
343 musb->int_usb &= ~MUSB_INTR_VBUSERROR;
344 musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
345 mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
346 WARNING("VBUS error workaround (delay coming)\n");
Felipe Balbi032ec492011-11-24 15:46:26 +0200347 } else if (drvvbus) {
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300348 MUSB_HST_MODE(musb);
Heikki Krogerusd445b6d2012-02-13 13:24:15 +0200349 otg->default_a = 1;
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300350 musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
351 portstate(musb->port1_status |= USB_PORT_STAT_POWER);
352 del_timer(&otg_workaround);
353 } else {
354 musb->is_active = 0;
355 MUSB_DEV_MODE(musb);
Heikki Krogerusd445b6d2012-02-13 13:24:15 +0200356 otg->default_a = 0;
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300357 musb->xceiv->state = OTG_STATE_B_IDLE;
358 portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
359 }
360
Felipe Balbi5c8a86e2011-05-11 12:44:08 +0300361 dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300362 drvvbus ? "on" : "off",
Felipe Balbi42c0bf12013-03-07 10:39:57 +0200363 usb_otg_state_string(musb->xceiv->state),
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300364 err ? " ERROR" : "",
365 devctl);
366 ret = IRQ_HANDLED;
367 }
368
369 if (musb->int_tx || musb->int_rx || musb->int_usb)
370 ret |= musb_interrupt(musb);
371
372 eoi:
373 /* EOI needs to be written for the IRQ to be re-asserted. */
374 if (ret == IRQ_HANDLED || status)
375 musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
376
377 /* Poll for ID change */
Felipe Balbi032ec492011-11-24 15:46:26 +0200378 if (musb->xceiv->state == OTG_STATE_B_IDLE)
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300379 mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
380
381 spin_unlock_irqrestore(&musb->lock, flags);
382
383 return ret;
384}
385
Felipe Balbi743411b2010-12-01 13:22:05 +0200386static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300387{
388 u32 cfgchip2 = __raw_readl(CFGCHIP2);
389
390 cfgchip2 &= ~CFGCHIP2_OTGMODE;
391 switch (musb_mode) {
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300392 case MUSB_HOST: /* Force VBUS valid, ID = 0 */
393 cfgchip2 |= CFGCHIP2_FORCE_HOST;
394 break;
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300395 case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
396 cfgchip2 |= CFGCHIP2_FORCE_DEVICE;
397 break;
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300398 case MUSB_OTG: /* Don't override the VBUS/ID comparators */
399 cfgchip2 |= CFGCHIP2_NO_OVERRIDE;
400 break;
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300401 default:
Felipe Balbi5c8a86e2011-05-11 12:44:08 +0300402 dev_dbg(musb->controller, "Trying to set unsupported mode %u\n", musb_mode);
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300403 }
404
405 __raw_writel(cfgchip2, CFGCHIP2);
406 return 0;
407}
408
Felipe Balbi743411b2010-12-01 13:22:05 +0200409static int da8xx_musb_init(struct musb *musb)
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300410{
411 void __iomem *reg_base = musb->ctrl_base;
412 u32 rev;
Ming Lei25736e02013-01-04 23:13:58 +0800413 int ret = -ENODEV;
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300414
415 musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
416
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300417 /* Returns zero if e.g. not clocked */
418 rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);
419 if (!rev)
420 goto fail;
421
422 usb_nop_xceiv_register();
Kishon Vijay Abraham I662dca52012-06-22 17:02:46 +0530423 musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
Ming Lei25736e02013-01-04 23:13:58 +0800424 if (IS_ERR_OR_NULL(musb->xceiv)) {
425 ret = -EPROBE_DEFER;
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300426 goto fail;
Ming Lei25736e02013-01-04 23:13:58 +0800427 }
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300428
Felipe Balbi032ec492011-11-24 15:46:26 +0200429 setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300430
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300431 /* Reset the controller */
432 musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);
433
434 /* Start the on-chip PHY and its PLL. */
435 phy_on();
436
437 msleep(5);
438
439 /* NOTE: IRQs are in mixed mode, not bypass to pure MUSB */
440 pr_debug("DA8xx OTG revision %08x, PHY %03x, control %02x\n",
441 rev, __raw_readl(CFGCHIP2),
442 musb_readb(reg_base, DA8XX_USB_CTRL_REG));
443
Felipe Balbi743411b2010-12-01 13:22:05 +0200444 musb->isr = da8xx_musb_interrupt;
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300445 return 0;
446fail:
Ming Lei25736e02013-01-04 23:13:58 +0800447 return ret;
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300448}
449
Felipe Balbi743411b2010-12-01 13:22:05 +0200450static int da8xx_musb_exit(struct musb *musb)
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300451{
Felipe Balbi032ec492011-11-24 15:46:26 +0200452 del_timer_sync(&otg_workaround);
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300453
454 phy_off();
455
Kishon Vijay Abraham I721002e2012-06-22 17:02:45 +0530456 usb_put_phy(musb->xceiv);
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300457 usb_nop_xceiv_unregister();
458
Sergei Shtylyov3ee076d2010-09-24 13:44:03 +0300459 return 0;
460}
Felipe Balbi743411b2010-12-01 13:22:05 +0200461
Felipe Balbif7ec9432010-12-02 09:48:58 +0200462static const struct musb_platform_ops da8xx_ops = {
Felipe Balbi743411b2010-12-01 13:22:05 +0200463 .init = da8xx_musb_init,
464 .exit = da8xx_musb_exit,
465
466 .enable = da8xx_musb_enable,
467 .disable = da8xx_musb_disable,
468
469 .set_mode = da8xx_musb_set_mode,
470 .try_idle = da8xx_musb_try_idle,
471
472 .set_vbus = da8xx_musb_set_vbus,
473};
Felipe Balbi8ceae512010-12-02 09:19:35 +0200474
475static u64 da8xx_dmamask = DMA_BIT_MASK(32);
476
Bill Pemberton41ac7b32012-11-19 13:21:48 -0500477static int da8xx_probe(struct platform_device *pdev)
Felipe Balbi8ceae512010-12-02 09:19:35 +0200478{
Felipe Balbi09fc7d22013-04-24 17:21:42 +0300479 struct resource musb_resources[2];
Jingoo Hanc1a7d672013-07-30 17:03:12 +0900480 struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
Felipe Balbi8ceae512010-12-02 09:19:35 +0200481 struct platform_device *musb;
Felipe Balbie6480fa2010-12-02 09:40:34 +0200482 struct da8xx_glue *glue;
Felipe Balbi8ceae512010-12-02 09:19:35 +0200483
Felipe Balbi03491762010-12-02 09:57:08 +0200484 struct clk *clk;
485
Felipe Balbi8ceae512010-12-02 09:19:35 +0200486 int ret = -ENOMEM;
487
Felipe Balbie6480fa2010-12-02 09:40:34 +0200488 glue = kzalloc(sizeof(*glue), GFP_KERNEL);
489 if (!glue) {
490 dev_err(&pdev->dev, "failed to allocate glue context\n");
491 goto err0;
492 }
493
Sebastian Andrzej Siewior2f771162012-10-31 16:12:43 +0100494 musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
Felipe Balbi8ceae512010-12-02 09:19:35 +0200495 if (!musb) {
496 dev_err(&pdev->dev, "failed to allocate musb device\n");
Sebastian Andrzej Siewior2f771162012-10-31 16:12:43 +0100497 goto err1;
Felipe Balbi8ceae512010-12-02 09:19:35 +0200498 }
499
Felipe Balbi03491762010-12-02 09:57:08 +0200500 clk = clk_get(&pdev->dev, "usb20");
501 if (IS_ERR(clk)) {
502 dev_err(&pdev->dev, "failed to get clock\n");
503 ret = PTR_ERR(clk);
B, Ravi65b3d522012-08-31 11:09:49 +0000504 goto err3;
Felipe Balbi03491762010-12-02 09:57:08 +0200505 }
506
507 ret = clk_enable(clk);
508 if (ret) {
509 dev_err(&pdev->dev, "failed to enable clock\n");
B, Ravi65b3d522012-08-31 11:09:49 +0000510 goto err4;
Felipe Balbi03491762010-12-02 09:57:08 +0200511 }
512
Felipe Balbi8ceae512010-12-02 09:19:35 +0200513 musb->dev.parent = &pdev->dev;
514 musb->dev.dma_mask = &da8xx_dmamask;
515 musb->dev.coherent_dma_mask = da8xx_dmamask;
516
Felipe Balbie6480fa2010-12-02 09:40:34 +0200517 glue->dev = &pdev->dev;
518 glue->musb = musb;
Felipe Balbi03491762010-12-02 09:57:08 +0200519 glue->clk = clk;
Felipe Balbie6480fa2010-12-02 09:40:34 +0200520
Felipe Balbif7ec9432010-12-02 09:48:58 +0200521 pdata->platform_ops = &da8xx_ops;
522
Felipe Balbie6480fa2010-12-02 09:40:34 +0200523 platform_set_drvdata(pdev, glue);
Felipe Balbi8ceae512010-12-02 09:19:35 +0200524
Felipe Balbi09fc7d22013-04-24 17:21:42 +0300525 memset(musb_resources, 0x00, sizeof(*musb_resources) *
526 ARRAY_SIZE(musb_resources));
527
528 musb_resources[0].name = pdev->resource[0].name;
529 musb_resources[0].start = pdev->resource[0].start;
530 musb_resources[0].end = pdev->resource[0].end;
531 musb_resources[0].flags = pdev->resource[0].flags;
532
533 musb_resources[1].name = pdev->resource[1].name;
534 musb_resources[1].start = pdev->resource[1].start;
535 musb_resources[1].end = pdev->resource[1].end;
536 musb_resources[1].flags = pdev->resource[1].flags;
537
538 ret = platform_device_add_resources(musb, musb_resources,
539 ARRAY_SIZE(musb_resources));
Felipe Balbi8ceae512010-12-02 09:19:35 +0200540 if (ret) {
541 dev_err(&pdev->dev, "failed to add resources\n");
B, Ravi65b3d522012-08-31 11:09:49 +0000542 goto err5;
Felipe Balbi8ceae512010-12-02 09:19:35 +0200543 }
544
545 ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
546 if (ret) {
547 dev_err(&pdev->dev, "failed to add platform_data\n");
B, Ravi65b3d522012-08-31 11:09:49 +0000548 goto err5;
Felipe Balbi8ceae512010-12-02 09:19:35 +0200549 }
550
551 ret = platform_device_add(musb);
552 if (ret) {
553 dev_err(&pdev->dev, "failed to register musb device\n");
B, Ravi65b3d522012-08-31 11:09:49 +0000554 goto err5;
Felipe Balbi8ceae512010-12-02 09:19:35 +0200555 }
556
557 return 0;
558
B, Ravi65b3d522012-08-31 11:09:49 +0000559err5:
Felipe Balbi03491762010-12-02 09:57:08 +0200560 clk_disable(clk);
561
B, Ravi65b3d522012-08-31 11:09:49 +0000562err4:
Felipe Balbi03491762010-12-02 09:57:08 +0200563 clk_put(clk);
564
B, Ravi65b3d522012-08-31 11:09:49 +0000565err3:
Felipe Balbi8ceae512010-12-02 09:19:35 +0200566 platform_device_put(musb);
567
Felipe Balbie6480fa2010-12-02 09:40:34 +0200568err1:
569 kfree(glue);
570
Felipe Balbi8ceae512010-12-02 09:19:35 +0200571err0:
572 return ret;
573}
574
Bill Pembertonfb4e98a2012-11-19 13:26:20 -0500575static int da8xx_remove(struct platform_device *pdev)
Felipe Balbi8ceae512010-12-02 09:19:35 +0200576{
Felipe Balbie6480fa2010-12-02 09:40:34 +0200577 struct da8xx_glue *glue = platform_get_drvdata(pdev);
Felipe Balbi8ceae512010-12-02 09:19:35 +0200578
Wei Yongjunb59e9062012-10-23 13:26:15 +0800579 platform_device_unregister(glue->musb);
Felipe Balbi03491762010-12-02 09:57:08 +0200580 clk_disable(glue->clk);
581 clk_put(glue->clk);
Felipe Balbie6480fa2010-12-02 09:40:34 +0200582 kfree(glue);
Felipe Balbi8ceae512010-12-02 09:19:35 +0200583
584 return 0;
585}
586
587static struct platform_driver da8xx_driver = {
Felipe Balbie9e8c852012-01-26 12:40:23 +0200588 .probe = da8xx_probe,
Bill Pemberton76904172012-11-19 13:21:08 -0500589 .remove = da8xx_remove,
Felipe Balbi8ceae512010-12-02 09:19:35 +0200590 .driver = {
591 .name = "musb-da8xx",
592 },
593};
594
595MODULE_DESCRIPTION("DA8xx/OMAP-L1x MUSB Glue Layer");
596MODULE_AUTHOR("Sergei Shtylyov <sshtylyov@ru.mvista.com>");
597MODULE_LICENSE("GPL v2");
Srinivas Kandagatla0b077342012-10-10 19:36:59 +0100598module_platform_driver(da8xx_driver);