blob: 3c55a5ff74c761ac8cf9e00d5056146458cae1ee [file] [log] [blame]
Jeff Garzik669a5db2006-08-29 18:12:40 -04001/*
2 * pata_ali.c - ALI 15x3 PATA for new ATA layer
3 * (C) 2005 Red Hat Inc
4 * Alan Cox <alan@redhat.com>
5 *
6 * based in part upon
7 * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02
8 *
9 * Copyright (C) 1998-2000 Michel Aubry, Maintainer
10 * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
11 * Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer
12 *
13 * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org)
14 * May be copied or modified under the terms of the GNU General Public License
15 * Copyright (C) 2002 Alan Cox <alan@redhat.com>
16 * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
17 *
18 * Documentation
19 * Chipset documentation available under NDA only
20 *
21 * TODO/CHECK
22 * Cannot have ATAPI on both master & slave for rev < c2 (???) but
23 * otherwise should do atapi DMA.
24 */
25
26#include <linux/kernel.h>
27#include <linux/module.h>
28#include <linux/pci.h>
29#include <linux/init.h>
30#include <linux/blkdev.h>
31#include <linux/delay.h>
32#include <scsi/scsi_host.h>
33#include <linux/libata.h>
34#include <linux/dmi.h>
35
36#define DRV_NAME "pata_ali"
Alan Coxb723d142007-03-26 21:43:37 -080037#define DRV_VERSION "0.7.4"
Jeff Garzik669a5db2006-08-29 18:12:40 -040038
39/*
40 * Cable special cases
41 */
42
43static struct dmi_system_id cable_dmi_table[] = {
44 {
45 .ident = "HP Pavilion N5430",
46 .matches = {
47 DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
48 DMI_MATCH(DMI_BOARD_NAME, "OmniBook N32N-736"),
49 },
50 },
51 { }
52};
53
54static int ali_cable_override(struct pci_dev *pdev)
55{
56 /* Fujitsu P2000 */
57 if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF)
58 return 1;
59 /* Systems by DMI */
60 if (dmi_check_system(cable_dmi_table))
61 return 1;
62 return 0;
63}
64
65/**
66 * ali_c2_cable_detect - cable detection
67 * @ap: ATA port
68 *
69 * Perform cable detection for C2 and later revisions
70 */
71
72static int ali_c2_cable_detect(struct ata_port *ap)
73{
74 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
75 u8 ata66;
76
77 /* Certain laptops use short but suitable cables and don't
78 implement the detect logic */
79
80 if (ali_cable_override(pdev))
Alan Coxfc085152006-10-10 14:28:11 -070081 return ATA_CBL_PATA40_SHORT;
Jeff Garzik669a5db2006-08-29 18:12:40 -040082
83 /* Host view cable detect 0x4A bit 0 primary bit 1 secondary
84 Bit set for 40 pin */
85 pci_read_config_byte(pdev, 0x4A, &ata66);
86 if (ata66 & (1 << ap->port_no))
87 return ATA_CBL_PATA40;
88 else
89 return ATA_CBL_PATA80;
90}
91
92/**
Jeff Garzik669a5db2006-08-29 18:12:40 -040093 * ali_20_filter - filter for earlier ALI DMA
94 * @ap: ALi ATA port
95 * @adev: attached device
96 *
97 * Ensure that we do not do DMA on CD devices. We may be able to
98 * fix that later on. Also ensure we do not do UDMA on WDC drives
99 */
100
Alan Coxa76b62c2007-03-09 09:34:07 -0500101static unsigned long ali_20_filter(struct ata_device *adev, unsigned long mask)
Jeff Garzik669a5db2006-08-29 18:12:40 -0400102{
Tejun Heo8bfa79f2007-01-02 20:19:40 +0900103 char model_num[ATA_ID_PROD_LEN + 1];
Jeff Garzik669a5db2006-08-29 18:12:40 -0400104 /* No DMA on anything but a disk for now */
105 if (adev->class != ATA_DEV_ATA)
106 mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
Tejun Heo8bfa79f2007-01-02 20:19:40 +0900107 ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
Jeff Garzik669a5db2006-08-29 18:12:40 -0400108 if (strstr(model_num, "WDC"))
109 return mask &= ~ATA_MASK_UDMA;
Alan Coxa76b62c2007-03-09 09:34:07 -0500110 return ata_pci_default_filter(adev, mask);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400111}
112
113/**
114 * ali_fifo_control - FIFO manager
115 * @ap: ALi channel to control
116 * @adev: device for FIFO control
117 * @on: 0 for off 1 for on
118 *
119 * Enable or disable the FIFO on a given device. Because of the way the
120 * ALi FIFO works it provides a boost on ATA disk but can be confused by
121 * ATAPI and we must therefore manage it.
122 */
123
124static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int on)
125{
126 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
127 int pio_fifo = 0x54 + ap->port_no;
128 u8 fifo;
129 int shift = 4 * adev->devno;
130
131 /* ATA - FIFO on set nibble to 0x05, ATAPI - FIFO off, set nibble to
132 0x00. Not all the docs agree but the behaviour we now use is the
133 one stated in the BIOS Programming Guide */
Jeff Garzik85cd7252006-08-31 00:03:49 -0400134
Jeff Garzik669a5db2006-08-29 18:12:40 -0400135 pci_read_config_byte(pdev, pio_fifo, &fifo);
136 fifo &= ~(0x0F << shift);
137 if (on)
138 fifo |= (on << shift);
139 pci_write_config_byte(pdev, pio_fifo, fifo);
140}
141
142/**
143 * ali_program_modes - load mode registers
144 * @ap: ALi channel to load
145 * @adev: Device the timing is for
146 * @cmd: Command timing
147 * @data: Data timing
148 * @ultra: UDMA timing or zero for off
149 *
150 * Loads the timing registers for cmd/data and disable UDMA if
151 * ultra is zero. If ultra is set then load and enable the UDMA
152 * timing but do not touch the command/data timing.
153 */
154
155static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, struct ata_timing *t, u8 ultra)
156{
157 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
158 int cas = 0x58 + 4 * ap->port_no; /* Command timing */
159 int cbt = 0x59 + 4 * ap->port_no; /* Command timing */
160 int drwt = 0x5A + 4 * ap->port_no + adev->devno; /* R/W timing */
161 int udmat = 0x56 + ap->port_no; /* UDMA timing */
162 int shift = 4 * adev->devno;
163 u8 udma;
164
165 if (t != NULL) {
166 t->setup = FIT(t->setup, 1, 8) & 7;
167 t->act8b = FIT(t->act8b, 1, 8) & 7;
168 t->rec8b = FIT(t->rec8b, 1, 16) & 15;
169 t->active = FIT(t->active, 1, 8) & 7;
170 t->recover = FIT(t->recover, 1, 16) & 15;
171
172 pci_write_config_byte(pdev, cas, t->setup);
173 pci_write_config_byte(pdev, cbt, (t->act8b << 4) | t->rec8b);
174 pci_write_config_byte(pdev, drwt, (t->active << 4) | t->recover);
175 }
176
177 /* Set up the UDMA enable */
178 pci_read_config_byte(pdev, udmat, &udma);
179 udma &= ~(0x0F << shift);
180 udma |= ultra << shift;
181 pci_write_config_byte(pdev, udmat, udma);
182}
183
184/**
185 * ali_set_piomode - set initial PIO mode data
186 * @ap: ATA interface
187 * @adev: ATA device
188 *
189 * Program the ALi registers for PIO mode. FIXME: add timings for
190 * PIO5.
191 */
192
193static void ali_set_piomode(struct ata_port *ap, struct ata_device *adev)
194{
195 struct ata_device *pair = ata_dev_pair(adev);
196 struct ata_timing t;
197 unsigned long T = 1000000000 / 33333; /* PCI clock based */
198
199 ata_timing_compute(adev, adev->pio_mode, &t, T, 1);
200 if (pair) {
201 struct ata_timing p;
202 ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
203 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
204 if (pair->dma_mode) {
205 ata_timing_compute(pair, pair->dma_mode, &p, T, 1);
206 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
207 }
208 }
209
210 /* PIO FIFO is only permitted on ATA disk */
211 if (adev->class != ATA_DEV_ATA)
212 ali_fifo_control(ap, adev, 0x00);
213 ali_program_modes(ap, adev, &t, 0);
214 if (adev->class == ATA_DEV_ATA)
215 ali_fifo_control(ap, adev, 0x05);
216
217}
218
219/**
220 * ali_set_dmamode - set initial DMA mode data
221 * @ap: ATA interface
222 * @adev: ATA device
223 *
224 * FIXME: MWDMA timings
225 */
226
227static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev)
228{
229 static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD };
230 struct ata_device *pair = ata_dev_pair(adev);
231 struct ata_timing t;
232 unsigned long T = 1000000000 / 33333; /* PCI clock based */
233 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
234
235
236 if (adev->class == ATA_DEV_ATA)
237 ali_fifo_control(ap, adev, 0x08);
238
239 if (adev->dma_mode >= XFER_UDMA_0) {
240 ali_program_modes(ap, adev, NULL, udma_timing[adev->dma_mode - XFER_UDMA_0]);
241 if (adev->dma_mode >= XFER_UDMA_3) {
242 u8 reg4b;
243 pci_read_config_byte(pdev, 0x4B, &reg4b);
244 reg4b |= 1;
245 pci_write_config_byte(pdev, 0x4B, reg4b);
246 }
247 } else {
248 ata_timing_compute(adev, adev->dma_mode, &t, T, 1);
249 if (pair) {
250 struct ata_timing p;
251 ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
252 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
253 if (pair->dma_mode) {
254 ata_timing_compute(pair, pair->dma_mode, &p, T, 1);
255 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
256 }
257 }
258 ali_program_modes(ap, adev, &t, 0);
259 }
260}
261
262/**
263 * ali_lock_sectors - Keep older devices to 255 sector mode
Jeff Garzik669a5db2006-08-29 18:12:40 -0400264 * @adev: Device
265 *
266 * Called during the bus probe for each device that is found. We use
267 * this call to lock the sector count of the device to 255 or less on
268 * older ALi controllers. If we didn't do this then large I/O's would
269 * require LBA48 commands which the older ALi requires are issued by
270 * slower PIO methods
271 */
272
Alancd0d3bb2007-03-02 00:56:15 +0000273static void ali_lock_sectors(struct ata_device *adev)
Jeff Garzik669a5db2006-08-29 18:12:40 -0400274{
275 adev->max_sectors = 255;
276}
277
278static struct scsi_host_template ali_sht = {
279 .module = THIS_MODULE,
280 .name = DRV_NAME,
281 .ioctl = ata_scsi_ioctl,
282 .queuecommand = ata_scsi_queuecmd,
283 .can_queue = ATA_DEF_QUEUE,
284 .this_id = ATA_SHT_THIS_ID,
285 .sg_tablesize = LIBATA_MAX_PRD,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400286 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
287 .emulated = ATA_SHT_EMULATED,
288 .use_clustering = ATA_SHT_USE_CLUSTERING,
289 .proc_name = DRV_NAME,
290 .dma_boundary = ATA_DMA_BOUNDARY,
291 .slave_configure = ata_scsi_slave_config,
Tejun Heoafdfe892006-11-29 11:26:47 +0900292 .slave_destroy = ata_scsi_slave_destroy,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400293 .bios_param = ata_std_bios_param,
294};
295
296/*
297 * Port operations for PIO only ALi
298 */
299
300static struct ata_port_operations ali_early_port_ops = {
301 .port_disable = ata_port_disable,
302 .set_piomode = ali_set_piomode,
303 .tf_load = ata_tf_load,
304 .tf_read = ata_tf_read,
305 .check_status = ata_check_status,
306 .exec_command = ata_exec_command,
307 .dev_select = ata_std_dev_select,
308
309 .freeze = ata_bmdma_freeze,
310 .thaw = ata_bmdma_thaw,
Alan Coxb723d142007-03-26 21:43:37 -0800311 .error_handler = ata_bmdma_error_handler,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400312 .post_internal_cmd = ata_bmdma_post_internal_cmd,
Alan Coxb723d142007-03-26 21:43:37 -0800313 .cable_detect = ata_cable_40wire,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400314
315 .qc_prep = ata_qc_prep,
316 .qc_issue = ata_qc_issue_prot,
Jeff Garzikbda30282006-09-27 05:41:13 -0400317
Tejun Heo0d5ff562007-02-01 15:06:36 +0900318 .data_xfer = ata_data_xfer,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400319
320 .irq_handler = ata_interrupt,
321 .irq_clear = ata_bmdma_irq_clear,
Akira Iguchi246ce3b2007-01-26 16:27:58 +0900322 .irq_on = ata_irq_on,
323 .irq_ack = ata_irq_ack,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400324
325 .port_start = ata_port_start,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400326};
327
328/*
329 * Port operations for DMA capable ALi without cable
330 * detect
331 */
332static struct ata_port_operations ali_20_port_ops = {
333 .port_disable = ata_port_disable,
334
335 .set_piomode = ali_set_piomode,
336 .set_dmamode = ali_set_dmamode,
337 .mode_filter = ali_20_filter,
338
339 .tf_load = ata_tf_load,
340 .tf_read = ata_tf_read,
341 .check_status = ata_check_status,
342 .exec_command = ata_exec_command,
343 .dev_select = ata_std_dev_select,
344 .dev_config = ali_lock_sectors,
345
346 .freeze = ata_bmdma_freeze,
347 .thaw = ata_bmdma_thaw,
Alan Coxb723d142007-03-26 21:43:37 -0800348 .error_handler = ata_bmdma_error_handler,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400349 .post_internal_cmd = ata_bmdma_post_internal_cmd,
Alan Coxb723d142007-03-26 21:43:37 -0800350 .cable_detect = ata_cable_40wire,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400351
352 .bmdma_setup = ata_bmdma_setup,
353 .bmdma_start = ata_bmdma_start,
354 .bmdma_stop = ata_bmdma_stop,
355 .bmdma_status = ata_bmdma_status,
356
357 .qc_prep = ata_qc_prep,
358 .qc_issue = ata_qc_issue_prot,
Jeff Garzikbda30282006-09-27 05:41:13 -0400359
Tejun Heo0d5ff562007-02-01 15:06:36 +0900360 .data_xfer = ata_data_xfer,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400361
362 .irq_handler = ata_interrupt,
363 .irq_clear = ata_bmdma_irq_clear,
Akira Iguchi246ce3b2007-01-26 16:27:58 +0900364 .irq_on = ata_irq_on,
365 .irq_ack = ata_irq_ack,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400366
367 .port_start = ata_port_start,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400368};
369
370/*
371 * Port operations for DMA capable ALi with cable detect
372 */
373static struct ata_port_operations ali_c2_port_ops = {
374 .port_disable = ata_port_disable,
375 .set_piomode = ali_set_piomode,
376 .set_dmamode = ali_set_dmamode,
377 .mode_filter = ata_pci_default_filter,
378 .tf_load = ata_tf_load,
379 .tf_read = ata_tf_read,
380 .check_status = ata_check_status,
381 .exec_command = ata_exec_command,
382 .dev_select = ata_std_dev_select,
383 .dev_config = ali_lock_sectors,
384
385 .freeze = ata_bmdma_freeze,
386 .thaw = ata_bmdma_thaw,
Alan Coxb723d142007-03-26 21:43:37 -0800387 .error_handler = ata_bmdma_error_handler,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400388 .post_internal_cmd = ata_bmdma_post_internal_cmd,
Alan Coxb723d142007-03-26 21:43:37 -0800389 .cable_detect = ali_c2_cable_detect,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400390
391 .bmdma_setup = ata_bmdma_setup,
392 .bmdma_start = ata_bmdma_start,
393 .bmdma_stop = ata_bmdma_stop,
394 .bmdma_status = ata_bmdma_status,
395
396 .qc_prep = ata_qc_prep,
397 .qc_issue = ata_qc_issue_prot,
Jeff Garzikbda30282006-09-27 05:41:13 -0400398
Tejun Heo0d5ff562007-02-01 15:06:36 +0900399 .data_xfer = ata_data_xfer,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400400
401 .irq_handler = ata_interrupt,
402 .irq_clear = ata_bmdma_irq_clear,
Akira Iguchi246ce3b2007-01-26 16:27:58 +0900403 .irq_on = ata_irq_on,
404 .irq_ack = ata_irq_ack,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400405
406 .port_start = ata_port_start,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400407};
408
409/*
410 * Port operations for DMA capable ALi with cable detect and LBA48
411 */
412static struct ata_port_operations ali_c5_port_ops = {
413 .port_disable = ata_port_disable,
414 .set_piomode = ali_set_piomode,
415 .set_dmamode = ali_set_dmamode,
416 .mode_filter = ata_pci_default_filter,
417 .tf_load = ata_tf_load,
418 .tf_read = ata_tf_read,
419 .check_status = ata_check_status,
420 .exec_command = ata_exec_command,
421 .dev_select = ata_std_dev_select,
422
423 .freeze = ata_bmdma_freeze,
424 .thaw = ata_bmdma_thaw,
Alan Coxb723d142007-03-26 21:43:37 -0800425 .error_handler = ata_bmdma_error_handler,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400426 .post_internal_cmd = ata_bmdma_post_internal_cmd,
Alan Coxb723d142007-03-26 21:43:37 -0800427 .cable_detect = ali_c2_cable_detect,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400428
429 .bmdma_setup = ata_bmdma_setup,
430 .bmdma_start = ata_bmdma_start,
431 .bmdma_stop = ata_bmdma_stop,
432 .bmdma_status = ata_bmdma_status,
433
434 .qc_prep = ata_qc_prep,
435 .qc_issue = ata_qc_issue_prot,
Jeff Garzikbda30282006-09-27 05:41:13 -0400436
Tejun Heo0d5ff562007-02-01 15:06:36 +0900437 .data_xfer = ata_data_xfer,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400438
439 .irq_handler = ata_interrupt,
440 .irq_clear = ata_bmdma_irq_clear,
Akira Iguchi246ce3b2007-01-26 16:27:58 +0900441 .irq_on = ata_irq_on,
442 .irq_ack = ata_irq_ack,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400443
444 .port_start = ata_port_start,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400445};
446
Alan34d8dfb2006-11-22 17:26:06 +0000447
448/**
449 * ali_init_chipset - chip setup function
450 * @pdev: PCI device of ATA controller
451 *
452 * Perform the setup on the device that must be done both at boot
453 * and at resume time.
454 */
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500455
Alan34d8dfb2006-11-22 17:26:06 +0000456static void ali_init_chipset(struct pci_dev *pdev)
457{
458 u8 rev, tmp;
459 struct pci_dev *north, *isa_bridge;
460
461 pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
462
463 /*
464 * The chipset revision selects the driver operations and
465 * mode data.
466 */
467
468 if (rev >= 0x20 && rev < 0xC2) {
469 /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
470 pci_read_config_byte(pdev, 0x4B, &tmp);
471 /* Clear CD-ROM DMA write bit */
472 tmp &= 0x7F;
473 pci_write_config_byte(pdev, 0x4B, tmp);
474 } else if (rev >= 0xC2) {
475 /* Enable cable detection logic */
476 pci_read_config_byte(pdev, 0x4B, &tmp);
477 pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
478 }
Alan8e42a5a2006-12-04 16:36:05 +0000479 north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
Alan34d8dfb2006-11-22 17:26:06 +0000480 isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
481
482 if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {
483 /* Configure the ALi bridge logic. For non ALi rely on BIOS.
484 Set the south bridge enable bit */
485 pci_read_config_byte(isa_bridge, 0x79, &tmp);
486 if (rev == 0xC2)
487 pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
Alan8e42a5a2006-12-04 16:36:05 +0000488 else if (rev > 0xC2 && rev < 0xC5)
Alan34d8dfb2006-11-22 17:26:06 +0000489 pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
490 }
491 if (rev >= 0x20) {
492 /*
493 * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
494 * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
495 * via 0x54/55.
496 */
497 pci_read_config_byte(pdev, 0x53, &tmp);
498 if (rev <= 0x20)
499 tmp &= ~0x02;
500 if (rev >= 0xc7)
501 tmp |= 0x03;
502 else
503 tmp |= 0x01; /* CD_ROM enable for DMA */
504 pci_write_config_byte(pdev, 0x53, tmp);
505 }
506 pci_dev_put(isa_bridge);
507 pci_dev_put(north);
508 ata_pci_clear_simplex(pdev);
509}
Jeff Garzik669a5db2006-08-29 18:12:40 -0400510/**
511 * ali_init_one - discovery callback
512 * @pdev: PCI device ID
513 * @id: PCI table info
514 *
515 * An ALi IDE interface has been discovered. Figure out what revision
516 * and perform configuration work before handing it to the ATA layer
517 */
518
519static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
520{
Tejun Heo1626aeb2007-05-04 12:43:58 +0200521 static const struct ata_port_info info_early = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400522 .sht = &ali_sht,
523 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
524 .pio_mask = 0x1f,
525 .port_ops = &ali_early_port_ops
526 };
527 /* Revision 0x20 added DMA */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200528 static const struct ata_port_info info_20 = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400529 .sht = &ali_sht,
530 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
531 .pio_mask = 0x1f,
532 .mwdma_mask = 0x07,
533 .port_ops = &ali_20_port_ops
534 };
535 /* Revision 0x20 with support logic added UDMA */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200536 static const struct ata_port_info info_20_udma = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400537 .sht = &ali_sht,
538 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
539 .pio_mask = 0x1f,
Jeff Garzik85cd7252006-08-31 00:03:49 -0400540 .mwdma_mask = 0x07,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400541 .udma_mask = 0x07, /* UDMA33 */
542 .port_ops = &ali_20_port_ops
543 };
544 /* Revision 0xC2 adds UDMA66 */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200545 static const struct ata_port_info info_c2 = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400546 .sht = &ali_sht,
547 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
548 .pio_mask = 0x1f,
549 .mwdma_mask = 0x07,
550 .udma_mask = 0x1f,
551 .port_ops = &ali_c2_port_ops
552 };
553 /* Revision 0xC3 is UDMA100 */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200554 static const struct ata_port_info info_c3 = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400555 .sht = &ali_sht,
556 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
557 .pio_mask = 0x1f,
558 .mwdma_mask = 0x07,
559 .udma_mask = 0x3f,
560 .port_ops = &ali_c2_port_ops
561 };
562 /* Revision 0xC4 is UDMA133 */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200563 static const struct ata_port_info info_c4 = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400564 .sht = &ali_sht,
565 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
566 .pio_mask = 0x1f,
567 .mwdma_mask = 0x07,
568 .udma_mask = 0x7f,
569 .port_ops = &ali_c2_port_ops
570 };
571 /* Revision 0xC5 is UDMA133 with LBA48 DMA */
Tejun Heo1626aeb2007-05-04 12:43:58 +0200572 static const struct ata_port_info info_c5 = {
Jeff Garzik669a5db2006-08-29 18:12:40 -0400573 .sht = &ali_sht,
574 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
575 .pio_mask = 0x1f,
576 .mwdma_mask = 0x07,
577 .udma_mask = 0x7f,
578 .port_ops = &ali_c5_port_ops
579 };
580
Tejun Heo1626aeb2007-05-04 12:43:58 +0200581 const struct ata_port_info *ppi[] = { NULL, NULL };
Jeff Garzik669a5db2006-08-29 18:12:40 -0400582 u8 rev, tmp;
Alan34d8dfb2006-11-22 17:26:06 +0000583 struct pci_dev *isa_bridge;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400584
585 pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
586
587 /*
588 * The chipset revision selects the driver operations and
589 * mode data.
590 */
591
592 if (rev < 0x20) {
Tejun Heo1626aeb2007-05-04 12:43:58 +0200593 ppi[0] = &info_early;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400594 } else if (rev < 0xC2) {
Tejun Heo1626aeb2007-05-04 12:43:58 +0200595 ppi[0] = &info_20;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400596 } else if (rev == 0xC2) {
Tejun Heo1626aeb2007-05-04 12:43:58 +0200597 ppi[0] = &info_c2;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400598 } else if (rev == 0xC3) {
Tejun Heo1626aeb2007-05-04 12:43:58 +0200599 ppi[0] = &info_c3;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400600 } else if (rev == 0xC4) {
Tejun Heo1626aeb2007-05-04 12:43:58 +0200601 ppi[0] = &info_c4;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400602 } else
Tejun Heo1626aeb2007-05-04 12:43:58 +0200603 ppi[0] = &info_c5;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400604
Alan34d8dfb2006-11-22 17:26:06 +0000605 ali_init_chipset(pdev);
Jeff Garzikf20b16f2006-12-11 11:14:06 -0500606
Jeff Garzik669a5db2006-08-29 18:12:40 -0400607 isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
Alan34d8dfb2006-11-22 17:26:06 +0000608 if (isa_bridge && rev >= 0x20 && rev < 0xC2) {
609 /* Are we paired with a UDMA capable chip */
610 pci_read_config_byte(isa_bridge, 0x5E, &tmp);
611 if ((tmp & 0x1E) == 0x12)
Tejun Heo1626aeb2007-05-04 12:43:58 +0200612 ppi[0] = &info_20_udma;
Alan34d8dfb2006-11-22 17:26:06 +0000613 pci_dev_put(isa_bridge);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400614 }
Tejun Heo1626aeb2007-05-04 12:43:58 +0200615 return ata_pci_init_one(pdev, ppi);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400616}
617
Tejun Heo438ac6d2007-03-02 17:31:26 +0900618#ifdef CONFIG_PM
Alan34d8dfb2006-11-22 17:26:06 +0000619static int ali_reinit_one(struct pci_dev *pdev)
620{
621 ali_init_chipset(pdev);
622 return ata_pci_device_resume(pdev);
623}
Tejun Heo438ac6d2007-03-02 17:31:26 +0900624#endif
Alan34d8dfb2006-11-22 17:26:06 +0000625
Jeff Garzik2d2744f2006-09-28 20:21:59 -0400626static const struct pci_device_id ali[] = {
627 { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), },
628 { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), },
629
630 { },
Jeff Garzik669a5db2006-08-29 18:12:40 -0400631};
632
633static struct pci_driver ali_pci_driver = {
634 .name = DRV_NAME,
635 .id_table = ali,
636 .probe = ali_init_one,
Alan34d8dfb2006-11-22 17:26:06 +0000637 .remove = ata_pci_remove_one,
Tejun Heo438ac6d2007-03-02 17:31:26 +0900638#ifdef CONFIG_PM
Alan34d8dfb2006-11-22 17:26:06 +0000639 .suspend = ata_pci_device_suspend,
640 .resume = ali_reinit_one,
Tejun Heo438ac6d2007-03-02 17:31:26 +0900641#endif
Jeff Garzik669a5db2006-08-29 18:12:40 -0400642};
643
644static int __init ali_init(void)
645{
646 return pci_register_driver(&ali_pci_driver);
647}
648
649
650static void __exit ali_exit(void)
651{
652 pci_unregister_driver(&ali_pci_driver);
653}
654
655
656MODULE_AUTHOR("Alan Cox");
657MODULE_DESCRIPTION("low-level driver for ALi PATA");
658MODULE_LICENSE("GPL");
659MODULE_DEVICE_TABLE(pci, ali);
660MODULE_VERSION(DRV_VERSION);
661
662module_init(ali_init);
663module_exit(ali_exit);