Greg Ungerer | c605cbf | 2013-10-29 15:15:57 +1000 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2013 Greg Ungerer <gerg@uclinux.org> |
| 3 | * Copyright 2011 Freescale Semiconductor, Inc. |
| 4 | * Copyright 2011 Linaro Ltd. |
| 5 | * |
| 6 | * The code contained herein is licensed under the GNU General Public |
| 7 | * License. You may obtain a copy of the GNU General Public License |
| 8 | * Version 2 or later at the following locations: |
| 9 | * |
| 10 | * http://www.opensource.org/licenses/gpl-license.html |
| 11 | * http://www.gnu.org/copyleft/gpl.html |
| 12 | */ |
| 13 | |
| 14 | /dts-v1/; |
| 15 | #include "imx50.dtsi" |
| 16 | |
| 17 | / { |
| 18 | model = "Freescale i.MX50 Evaluation Kit"; |
| 19 | compatible = "fsl,imx50-evk", "fsl,imx50"; |
| 20 | |
| 21 | memory { |
| 22 | reg = <0x70000000 0x80000000>; |
| 23 | }; |
| 24 | }; |
| 25 | |
| 26 | &cspi { |
| 27 | pinctrl-names = "default"; |
| 28 | pinctrl-0 = <&pinctrl_cspi>; |
| 29 | fsl,spi-num-chipselects = <2>; |
| 30 | cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>; |
| 31 | status = "okay"; |
| 32 | |
| 33 | flash: m25p32@1 { |
| 34 | #address-cells = <1>; |
| 35 | #size-cells = <1>; |
| 36 | compatible = "m25p32", "m25p80"; |
| 37 | spi-max-frequency = <25000000>; |
| 38 | reg = <1>; |
| 39 | |
| 40 | partition@0 { |
| 41 | label = "bootloader"; |
| 42 | reg = <0x0 0x100000>; |
| 43 | read-only; |
| 44 | }; |
| 45 | |
| 46 | partition@100000 { |
| 47 | label = "kernel"; |
| 48 | reg = <0x100000 0x300000>; |
| 49 | }; |
| 50 | }; |
| 51 | }; |
| 52 | |
| 53 | &fec { |
| 54 | pinctrl-names = "default"; |
| 55 | pinctrl-0 = <&pinctrl_fec>; |
| 56 | phy-mode = "rmii"; |
| 57 | phy-reset-gpios = <&gpio4 12 0>; |
| 58 | status = "okay"; |
| 59 | }; |
| 60 | |
| 61 | &iomuxc { |
| 62 | imx50-evk { |
| 63 | pinctrl_cspi: cspigrp { |
| 64 | fsl,pins = < |
| 65 | MX50_PAD_CSPI_SCLK__CSPI_SCLK 0x00 |
| 66 | MX50_PAD_CSPI_MISO__CSPI_MISO 0x00 |
| 67 | MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x00 |
| 68 | MX50_PAD_CSPI_SS0__GPIO4_11 0xc4 |
| 69 | MX50_PAD_ECSPI1_MOSI__CSPI_SS1 0xf4 |
| 70 | >; |
| 71 | }; |
| 72 | |
| 73 | pinctrl_fec: fecgrp { |
| 74 | fsl,pins = < |
| 75 | MX50_PAD_SSI_RXFS__FEC_MDC 0x80 |
| 76 | MX50_PAD_SSI_RXC__FEC_MDIO 0x80 |
| 77 | MX50_PAD_DISP_D0__FEC_TX_CLK 0x80 |
| 78 | MX50_PAD_DISP_D1__FEC_RX_ERR 0x80 |
| 79 | MX50_PAD_DISP_D2__FEC_RX_DV 0x80 |
| 80 | MX50_PAD_DISP_D3__FEC_RDATA_1 0x80 |
| 81 | MX50_PAD_DISP_D4__FEC_RDATA_0 0x80 |
| 82 | MX50_PAD_DISP_D5__FEC_TX_EN 0x80 |
| 83 | MX50_PAD_DISP_D6__FEC_TDATA_1 0x80 |
| 84 | MX50_PAD_DISP_D7__FEC_TDATA_0 0x80 |
| 85 | >; |
| 86 | }; |
| 87 | |
| 88 | pinctrl_uart1: uart1grp { |
| 89 | fsl,pins = < |
| 90 | MX50_PAD_UART1_TXD__UART1_TXD_MUX 0x1e4 |
| 91 | MX50_PAD_UART1_RXD__UART1_RXD_MUX 0x1e4 |
| 92 | MX50_PAD_UART1_RTS__UART1_RTS 0x1e4 |
| 93 | MX50_PAD_UART1_CTS__UART1_CTS 0x1e4 |
| 94 | >; |
| 95 | }; |
| 96 | }; |
| 97 | }; |
| 98 | |
| 99 | &uart1 { |
| 100 | pinctrl-names = "default"; |
| 101 | pinctrl-0 = <&pinctrl_uart1>; |
| 102 | status = "okay"; |
| 103 | }; |
| 104 | |
| 105 | &usbh1 { |
| 106 | status = "okay"; |
| 107 | }; |
| 108 | |
| 109 | &usbh2 { |
| 110 | status = "okay"; |
| 111 | }; |
| 112 | |
| 113 | &usbh3 { |
| 114 | status = "okay"; |
| 115 | }; |
| 116 | |
| 117 | &usbotg { |
| 118 | status = "okay"; |
| 119 | }; |