Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 1 | /* |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 2 | * Copyright 2012 <LW@KARO-electronics.de> |
| 3 | * based on imx53-qsb.dts |
| 4 | * Copyright 2011 Freescale Semiconductor, Inc. |
| 5 | * Copyright 2011 Linaro Ltd. |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 6 | * |
| 7 | * The code contained herein is licensed under the GNU General Public |
| 8 | * License. You may obtain a copy of the GNU General Public License |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 9 | * Version 2 at the following locations: |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 10 | * |
| 11 | * http://www.opensource.org/licenses/gpl-license.html |
| 12 | * http://www.gnu.org/copyleft/gpl.html |
| 13 | */ |
| 14 | |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 15 | #include "imx53.dtsi" |
| 16 | #include <dt-bindings/gpio/gpio.h> |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 17 | |
| 18 | / { |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 19 | model = "Ka-Ro electronics TX53 module"; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 20 | compatible = "karo,tx53", "fsl,imx53"; |
| 21 | |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 22 | aliases { |
| 23 | can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */ |
| 24 | can1 = &can1; |
| 25 | ipu = &ipu; |
| 26 | reg_can_xcvr = ®_can_xcvr; |
| 27 | usbh1 = &usbh1; |
| 28 | usbotg = &usbotg; |
| 29 | }; |
| 30 | |
| 31 | clocks { |
| 32 | ckih1 { |
| 33 | clock-frequency = <0>; |
| 34 | }; |
| 35 | |
| 36 | mclk: clock@0 { |
| 37 | compatible = "fixed-clock"; |
| 38 | reg = <0>; |
| 39 | #clock-cells = <0>; |
| 40 | clock-frequency = <27000000>; |
| 41 | }; |
| 42 | }; |
| 43 | |
| 44 | gpio-keys { |
| 45 | compatible = "gpio-keys"; |
| 46 | pinctrl-names = "default"; |
| 47 | pinctrl-0 = <&pinctrl_gpio_key>; |
| 48 | |
| 49 | power { |
| 50 | label = "Power Button"; |
| 51 | gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; |
| 52 | linux,code = <116>; /* KEY_POWER */ |
| 53 | gpio-key,wakeup; |
| 54 | }; |
| 55 | }; |
| 56 | |
| 57 | leds { |
| 58 | compatible = "gpio-leds"; |
| 59 | pinctrl-names = "default"; |
| 60 | pinctrl-0 = <&pinctrl_stk5led>; |
| 61 | |
| 62 | user { |
| 63 | label = "Heartbeat"; |
| 64 | gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; |
| 65 | linux,default-trigger = "heartbeat"; |
| 66 | }; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 67 | }; |
| 68 | |
| 69 | regulators { |
| 70 | compatible = "simple-bus"; |
Shawn Guo | 352d318 | 2014-02-07 23:18:30 +0800 | [diff] [blame] | 71 | #address-cells = <1>; |
| 72 | #size-cells = <0>; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 73 | |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 74 | reg_2v5: regulator@0 { |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 75 | compatible = "regulator-fixed"; |
Shawn Guo | 352d318 | 2014-02-07 23:18:30 +0800 | [diff] [blame] | 76 | reg = <0>; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 77 | regulator-name = "2V5"; |
| 78 | regulator-min-microvolt = <2500000>; |
| 79 | regulator-max-microvolt = <2500000>; |
| 80 | }; |
| 81 | |
| 82 | reg_3v3: regulator@1 { |
| 83 | compatible = "regulator-fixed"; |
| 84 | reg = <1>; |
| 85 | regulator-name = "3V3"; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 86 | regulator-min-microvolt = <3300000>; |
| 87 | regulator-max-microvolt = <3300000>; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 88 | }; |
| 89 | |
| 90 | reg_can_xcvr: regulator@2 { |
| 91 | compatible = "regulator-fixed"; |
| 92 | reg = <2>; |
| 93 | regulator-name = "CAN XCVR"; |
| 94 | regulator-min-microvolt = <3300000>; |
| 95 | regulator-max-microvolt = <3300000>; |
| 96 | pinctrl-names = "default"; |
| 97 | pinctrl-0 = <&pinctrl_can_xcvr>; |
| 98 | gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 99 | }; |
| 100 | |
| 101 | reg_usbh1_vbus: regulator@3 { |
| 102 | compatible = "regulator-fixed"; |
| 103 | reg = <3>; |
| 104 | regulator-name = "usbh1_vbus"; |
| 105 | regulator-min-microvolt = <5000000>; |
| 106 | regulator-max-microvolt = <5000000>; |
| 107 | pinctrl-names = "default"; |
| 108 | pinctrl-0 = <&pinctrl_usbh1_vbus>; |
| 109 | gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; |
| 110 | enable-active-high; |
| 111 | }; |
| 112 | |
| 113 | reg_usbotg_vbus: regulator@4 { |
| 114 | compatible = "regulator-fixed"; |
| 115 | reg = <4>; |
| 116 | regulator-name = "usbotg_vbus"; |
| 117 | regulator-min-microvolt = <5000000>; |
| 118 | regulator-max-microvolt = <5000000>; |
| 119 | pinctrl-names = "default"; |
| 120 | pinctrl-0 = <&pinctrl_usbotg_vbus>; |
| 121 | gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| 122 | enable-active-high; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 123 | }; |
| 124 | }; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 125 | |
| 126 | sound { |
| 127 | compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000"; |
| 128 | model = "tx53-audio-sgtl5000"; |
| 129 | ssi-controller = <&ssi1>; |
| 130 | audio-codec = <&sgtl5000>; |
| 131 | audio-routing = |
| 132 | "MIC_IN", "Mic Jack", |
| 133 | "Mic Jack", "Mic Bias", |
| 134 | "Headphone Jack", "HP_OUT"; |
| 135 | /* '1' based port numbers according to datasheet names */ |
| 136 | mux-int-port = <1>; |
| 137 | mux-ext-port = <5>; |
| 138 | }; |
| 139 | }; |
| 140 | |
| 141 | &audmux { |
| 142 | pinctrl-names = "default"; |
| 143 | pinctrl-0 = <&pinctrl_ssi1>; |
| 144 | status = "okay"; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 145 | }; |
| 146 | |
| 147 | &can1 { |
| 148 | pinctrl-names = "default"; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 149 | pinctrl-0 = <&pinctrl_can1>; |
| 150 | xceiver-supply = <®_can_xcvr>; |
| 151 | status = "okay"; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 152 | }; |
| 153 | |
| 154 | &can2 { |
| 155 | pinctrl-names = "default"; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 156 | pinctrl-0 = <&pinctrl_can2>; |
| 157 | xceiver-supply = <®_can_xcvr>; |
| 158 | status = "okay"; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 159 | }; |
| 160 | |
| 161 | &ecspi1 { |
| 162 | pinctrl-names = "default"; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 163 | pinctrl-0 = <&pinctrl_ecspi1>; |
| 164 | fsl,spi-num-chipselects = <2>; |
| 165 | status = "okay"; |
| 166 | |
| 167 | cs-gpios = < |
| 168 | &gpio2 30 GPIO_ACTIVE_HIGH |
| 169 | &gpio3 19 GPIO_ACTIVE_HIGH |
| 170 | >; |
| 171 | |
| 172 | spidev0: spi@0 { |
| 173 | compatible = "spidev"; |
| 174 | reg = <0>; |
| 175 | spi-max-frequency = <54000000>; |
| 176 | }; |
| 177 | |
| 178 | spidev1: spi@1 { |
| 179 | compatible = "spidev"; |
| 180 | reg = <1>; |
| 181 | spi-max-frequency = <54000000>; |
| 182 | }; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 183 | }; |
| 184 | |
| 185 | &esdhc1 { |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 186 | cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; |
| 187 | fsl,wp-controller; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 188 | pinctrl-names = "default"; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 189 | pinctrl-0 = <&pinctrl_esdhc1>; |
| 190 | status = "okay"; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 191 | }; |
| 192 | |
| 193 | &esdhc2 { |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 194 | cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; |
| 195 | fsl,wp-controller; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 196 | pinctrl-names = "default"; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 197 | pinctrl-0 = <&pinctrl_esdhc2>; |
| 198 | status = "okay"; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 199 | }; |
| 200 | |
| 201 | &fec { |
| 202 | pinctrl-names = "default"; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 203 | pinctrl-0 = <&pinctrl_fec>; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 204 | phy-mode = "rmii"; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 205 | phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; |
| 206 | phy-handle = <&phy0>; |
| 207 | mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */ |
| 208 | status = "okay"; |
| 209 | |
| 210 | phy0: ethernet-phy@0 { |
| 211 | interrupt-parent = <&gpio2>; |
| 212 | interrupts = <4>; |
| 213 | device_type = "ethernet-phy"; |
| 214 | }; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 215 | }; |
| 216 | |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 217 | &i2c1 { |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 218 | pinctrl-names = "default"; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 219 | pinctrl-0 = <&pinctrl_i2c1>; |
| 220 | clock-frequency = <400000>; |
| 221 | status = "okay"; |
| 222 | |
| 223 | rtc1: ds1339@68 { |
| 224 | compatible = "dallas,ds1339"; |
| 225 | reg = <0x68>; |
| 226 | pinctrl-names = "default"; |
| 227 | pinctrl-0 = <&pinctrl_ds1339>; |
| 228 | interrupt-parent = <&gpio4>; |
| 229 | interrupts = <20 0>; |
| 230 | }; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 231 | }; |
| 232 | |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 233 | &iomuxc { |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 234 | pinctrl-names = "default"; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 235 | pinctrl-0 = <&pinctrl_hog>; |
| 236 | |
| 237 | imx53-tx53 { |
| 238 | pinctrl_hog: hoggrp { |
| 239 | /* pins not in use by any device on the Starterkit board series */ |
| 240 | fsl,pins = < |
| 241 | /* CMOS Sensor Interface */ |
| 242 | MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4 |
| 243 | MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4 |
| 244 | MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4 |
| 245 | MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4 |
| 246 | MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4 |
| 247 | MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4 |
| 248 | MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4 |
| 249 | MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4 |
| 250 | MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4 |
| 251 | MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4 |
| 252 | MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4 |
| 253 | MX53_PAD_GPIO_0__GPIO1_0 0x1f4 |
| 254 | /* Module Specific Signal */ |
| 255 | /* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */ |
| 256 | /* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */ |
| 257 | MX53_PAD_EIM_D29__GPIO3_29 0x1f4 |
| 258 | MX53_PAD_EIM_EB3__GPIO2_31 0x1f4 |
| 259 | /* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */ |
| 260 | /* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */ |
| 261 | MX53_PAD_EIM_A19__GPIO2_19 0x1f4 |
| 262 | MX53_PAD_EIM_A20__GPIO2_18 0x1f4 |
| 263 | MX53_PAD_EIM_A21__GPIO2_17 0x1f4 |
| 264 | MX53_PAD_EIM_A22__GPIO2_16 0x1f4 |
| 265 | MX53_PAD_EIM_A23__GPIO6_6 0x1f4 |
| 266 | MX53_PAD_EIM_A24__GPIO5_4 0x1f4 |
| 267 | MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4 |
| 268 | MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4 |
| 269 | MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4 |
| 270 | MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4 |
| 271 | /* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */ |
| 272 | /* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */ |
| 273 | MX53_PAD_GPIO_13__GPIO4_3 0x1f4 |
| 274 | MX53_PAD_EIM_CS0__GPIO2_23 0x1f4 |
| 275 | MX53_PAD_EIM_CS1__GPIO2_24 0x1f4 |
| 276 | MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4 |
| 277 | MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4 |
| 278 | MX53_PAD_EIM_EB0__GPIO2_28 0x1f4 |
| 279 | MX53_PAD_EIM_EB1__GPIO2_29 0x1f4 |
| 280 | MX53_PAD_EIM_OE__GPIO2_25 0x1f4 |
| 281 | MX53_PAD_EIM_LBA__GPIO2_27 0x1f4 |
| 282 | MX53_PAD_EIM_RW__GPIO2_26 0x1f4 |
| 283 | MX53_PAD_EIM_DA8__GPIO3_8 0x1f4 |
| 284 | MX53_PAD_EIM_DA9__GPIO3_9 0x1f4 |
| 285 | MX53_PAD_EIM_DA10__GPIO3_10 0x1f4 |
| 286 | MX53_PAD_EIM_DA11__GPIO3_11 0x1f4 |
| 287 | MX53_PAD_EIM_DA12__GPIO3_12 0x1f4 |
| 288 | MX53_PAD_EIM_DA13__GPIO3_13 0x1f4 |
| 289 | MX53_PAD_EIM_DA14__GPIO3_14 0x1f4 |
| 290 | MX53_PAD_EIM_DA15__GPIO3_15 0x1f4 |
| 291 | >; |
| 292 | }; |
| 293 | |
| 294 | pinctrl_can1: can1grp { |
| 295 | fsl,pins = < |
| 296 | MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000 |
| 297 | MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000 |
| 298 | >; |
| 299 | }; |
| 300 | |
| 301 | pinctrl_can2: can2grp { |
| 302 | fsl,pins = < |
| 303 | MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000 |
| 304 | MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000 |
| 305 | >; |
| 306 | }; |
| 307 | |
| 308 | pinctrl_can_xcvr: can-xcvrgrp { |
| 309 | fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */ |
| 310 | }; |
| 311 | |
| 312 | pinctrl_ds1339: ds1339grp { |
| 313 | fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>; |
| 314 | }; |
| 315 | |
| 316 | pinctrl_ecspi1: ecspi1grp { |
| 317 | fsl,pins = < |
| 318 | MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000 |
| 319 | MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000 |
| 320 | MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 |
| 321 | MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 |
| 322 | MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 |
| 323 | MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000 |
| 324 | >; |
| 325 | }; |
| 326 | |
| 327 | pinctrl_esdhc1: esdhc1grp { |
| 328 | fsl,pins = < |
| 329 | MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 |
| 330 | MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 |
| 331 | MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 |
| 332 | MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 |
| 333 | MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 |
| 334 | MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 |
| 335 | MX53_PAD_EIM_D24__GPIO3_24 0x1f0 |
| 336 | >; |
| 337 | }; |
| 338 | |
| 339 | pinctrl_esdhc2: esdhc2grp { |
| 340 | fsl,pins = < |
| 341 | MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 |
| 342 | MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 |
| 343 | MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 |
| 344 | MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 |
| 345 | MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 |
| 346 | MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 |
| 347 | MX53_PAD_EIM_D25__GPIO3_25 0x1f0 |
| 348 | >; |
| 349 | }; |
| 350 | |
| 351 | pinctrl_fec: fecgrp { |
| 352 | fsl,pins = < |
| 353 | MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 |
| 354 | MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 |
| 355 | MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 |
| 356 | MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 |
| 357 | MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 |
| 358 | MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 |
| 359 | MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 |
| 360 | MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 |
| 361 | MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 |
| 362 | MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 |
| 363 | >; |
| 364 | }; |
| 365 | |
| 366 | pinctrl_gpio_key: gpio-keygrp { |
| 367 | fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>; |
| 368 | }; |
| 369 | |
| 370 | pinctrl_i2c1: i2c1grp { |
| 371 | fsl,pins = < |
| 372 | MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000 |
| 373 | MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 |
| 374 | >; |
| 375 | }; |
| 376 | |
| 377 | pinctrl_i2c3: i2c3grp { |
| 378 | fsl,pins = < |
| 379 | MX53_PAD_GPIO_3__I2C3_SCL 0xc0000000 |
| 380 | MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 |
| 381 | >; |
| 382 | }; |
| 383 | |
| 384 | pinctrl_nand: nandgrp { |
| 385 | fsl,pins = < |
| 386 | MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 |
| 387 | MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 |
| 388 | MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 |
| 389 | MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 |
| 390 | MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 |
| 391 | MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 |
| 392 | MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 |
| 393 | MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0xa4 |
| 394 | MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0xa4 |
| 395 | MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0xa4 |
| 396 | MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0xa4 |
| 397 | MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0xa4 |
| 398 | MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0xa4 |
| 399 | MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0xa4 |
| 400 | MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0xa4 |
| 401 | >; |
| 402 | }; |
| 403 | |
| 404 | pinctrl_pwm2: pwm2grp { |
| 405 | fsl,pins = < |
| 406 | MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 |
| 407 | >; |
| 408 | }; |
| 409 | |
| 410 | pinctrl_ssi1: ssi1grp { |
| 411 | fsl,pins = < |
| 412 | MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 |
| 413 | MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 |
| 414 | MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 |
| 415 | MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 |
| 416 | >; |
| 417 | }; |
| 418 | |
| 419 | pinctrl_ssi2: ssi2grp { |
| 420 | fsl,pins = < |
| 421 | MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000 |
| 422 | MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000 |
| 423 | MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000 |
| 424 | MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000 |
| 425 | MX53_PAD_EIM_D27__GPIO3_27 0x1f0 |
| 426 | >; |
| 427 | }; |
| 428 | |
| 429 | pinctrl_stk5led: stk5ledgrp { |
| 430 | fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>; |
| 431 | }; |
| 432 | |
| 433 | pinctrl_uart1: uart1grp { |
| 434 | fsl,pins = < |
| 435 | MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 |
| 436 | MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 |
| 437 | MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5 |
| 438 | MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5 |
| 439 | >; |
| 440 | }; |
| 441 | |
| 442 | pinctrl_uart2: uart2grp { |
| 443 | fsl,pins = < |
| 444 | MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 |
| 445 | MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 |
| 446 | MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5 |
| 447 | MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5 |
| 448 | >; |
| 449 | }; |
| 450 | |
| 451 | pinctrl_uart3: uart3grp { |
| 452 | fsl,pins = < |
| 453 | MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 |
| 454 | MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 |
| 455 | MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 |
| 456 | MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 |
| 457 | >; |
| 458 | }; |
| 459 | |
| 460 | pinctrl_usbh1: usbh1grp { |
| 461 | fsl,pins = < |
| 462 | MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */ |
| 463 | >; |
| 464 | }; |
| 465 | |
| 466 | pinctrl_usbh1_vbus: usbh1-vbusgrp { |
| 467 | fsl,pins = < |
| 468 | MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */ |
| 469 | >; |
| 470 | }; |
| 471 | |
| 472 | pinctrl_usbotg_vbus: usbotg-vbusgrp { |
| 473 | fsl,pins = < |
| 474 | MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */ |
| 475 | MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */ |
| 476 | >; |
| 477 | }; |
| 478 | }; |
| 479 | }; |
| 480 | |
| 481 | &ipu { |
| 482 | status = "okay"; |
| 483 | }; |
| 484 | |
| 485 | &nfc { |
| 486 | pinctrl-names = "default"; |
| 487 | pinctrl-0 = <&pinctrl_nand>; |
| 488 | nand-bus-width = <8>; |
| 489 | nand-ecc-mode = "hw"; |
| 490 | nand-on-flash-bbt; |
| 491 | status = "okay"; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 492 | }; |
| 493 | |
| 494 | &pwm2 { |
| 495 | pinctrl-names = "default"; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 496 | pinctrl-0 = <&pinctrl_pwm2>; |
| 497 | #pwm-cells = <3>; |
| 498 | }; |
| 499 | |
| 500 | &sdma { |
| 501 | fsl,sdma-ram-script-name = "sdma-imx53.bin"; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 502 | }; |
| 503 | |
| 504 | &ssi1 { |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 505 | codec-handle = <&sgtl5000>; |
| 506 | status = "okay"; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 507 | }; |
| 508 | |
| 509 | &ssi2 { |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 510 | status = "disabled"; |
| 511 | }; |
| 512 | |
| 513 | &uart1 { |
| 514 | pinctrl-names = "default"; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 515 | pinctrl-0 = <&pinctrl_uart1>; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 516 | fsl,uart-has-rtscts; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 517 | status = "okay"; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 518 | }; |
| 519 | |
| 520 | &uart2 { |
| 521 | pinctrl-names = "default"; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 522 | pinctrl-0 = <&pinctrl_uart2>; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 523 | fsl,uart-has-rtscts; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 524 | status = "okay"; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 525 | }; |
| 526 | |
| 527 | &uart3 { |
| 528 | pinctrl-names = "default"; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 529 | pinctrl-0 = <&pinctrl_uart3>; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 530 | fsl,uart-has-rtscts; |
Lothar Waßmann | 4f5b6ba | 2014-01-18 16:18:38 +0800 | [diff] [blame] | 531 | status = "okay"; |
| 532 | }; |
| 533 | |
| 534 | &usbh1 { |
| 535 | pinctrl-names = "default"; |
| 536 | pinctrl-0 = <&pinctrl_usbh1>; |
| 537 | phy_type = "utmi"; |
| 538 | disable-over-current; |
| 539 | vbus-supply = <®_usbh1_vbus>; |
| 540 | status = "okay"; |
| 541 | }; |
| 542 | |
| 543 | &usbotg { |
| 544 | phy_type = "utmi"; |
| 545 | dr_mode = "peripheral"; |
| 546 | disable-over-current; |
| 547 | vbus-supply = <®_usbotg_vbus>; |
| 548 | status = "okay"; |
Steffen Trumtrar | 260cb6a | 2013-04-24 11:41:26 +0200 | [diff] [blame] | 549 | }; |