blob: d97308896f0c621dfc0a29175ddfcf8e0c2082df [file] [log] [blame]
Christoph Fritza1f4d172014-02-14 15:20:53 +01001/*
2 * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 */
9
10#include "omap36xx.dtsi"
11
12/ {
13 model = "INCOstartec LILLY-A83X module (DM3730)";
14 compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
15
16 chosen {
17 bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
18 };
19
20 memory {
21 device_type = "memory";
22 reg = <0x80000000 0x8000000>; /* 128 MB */
23 };
24
25 leds {
26 compatible = "gpio-leds";
27
28 led1 {
29 label = "lilly-a83x::led1";
30 gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
31 linux,default-trigger = "default-on";
32 };
33
34 };
35
36 sound {
37 compatible = "ti,omap-twl4030";
38 ti,model = "lilly-a83x";
39
40 ti,mcbsp = <&mcbsp2>;
41 ti,codec = <&twl_audio>;
42 };
43
44 reg_vcc3: vcc3 {
45 compatible = "regulator-fixed";
46 regulator-name = "VCC3";
47 regulator-min-microvolt = <3300000>;
48 regulator-max-microvolt = <3300000>;
49 regulator-always-on;
50 };
51
52 hsusb1_phy: hsusb1_phy {
53 compatible = "usb-nop-xceiv";
54 vcc-supply = <&reg_vcc3>;
55 };
56};
57
58&omap3_pmx_wkup {
59 pinctrl-names = "default";
60
61 lan9221_pins: pinmux_lan9221_pins {
62 pinctrl-single,pins = <
63 OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
64 >;
65 };
66
67 tsc2048_pins: pinmux_tsc2048_pins {
68 pinctrl-single,pins = <
69 OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot6.gpio_8 */
70 >;
71 };
72
73 mmc1cd_pins: pinmux_mmc1cd_pins {
74 pinctrl-single,pins = <
75 OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 */
76 >;
77 };
78};
79
80&omap3_pmx_core {
81 pinctrl-names = "default";
82
83 uart1_pins: pinmux_uart1_pins {
84 pinctrl-single,pins = <
85 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
86 OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
87 OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
88 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
89 >;
90 };
91
92 uart2_pins: pinmux_uart2_pins {
93 pinctrl-single,pins = <
94 OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clkx.uart2_tx */
95 OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */
96 >;
97 };
98
99 uart3_pins: pinmux_uart3_pins {
100 pinctrl-single,pins = <
101 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
102 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
103 >;
104 };
105
106 i2c1_pins: pinmux_i2c1_pins {
107 pinctrl-single,pins = <
108 OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */
109 OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */
110 >;
111 };
112
113 i2c2_pins: pinmux_i2c2_pins {
114 pinctrl-single,pins = <
115 OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
116 OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
117 >;
118 };
119
120 i2c3_pins: pinmux_i2c3_pins {
121 pinctrl-single,pins = <
122 OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
123 OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
124 >;
125 };
126
127 hsusb1_pins: pinmux_hsusb1_pins {
128 pinctrl-single,pins = <
129
130 /* GPIO 182 controls USB-Hub reset. But USB-Phy its
131 * reset can't be controlled. So we clamp this GPIO to
132 * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
133 */
134
135 OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
136 >;
137 };
138
139 hsusb_otg_pins: pinmux_hsusb_otg_pins {
140 pinctrl-single,pins = <
141 OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
142 OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
143 OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
144 OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
145 OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
146 OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
147 OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
148 OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
149 OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
150 OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
151 OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
152 OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
153 >;
154 };
155
156 mmc1_pins: pinmux_mmc1_pins {
157 pinctrl-single,pins = <
158 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
159 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
160 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
161 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
162 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
163 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
164 >;
165 };
166
167 spi2_pins: pinmux_spi2_pins {
168 pinctrl-single,pins = <
169 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_clk.mcspi2_clk */
170 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_simo.mcspi2_simo */
171 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_somi.mcspi2_somi */
172 OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0.mcspi2_cs0 */
173 >;
174 };
175};
176
177&omap3_pmx_core2 {
178 pinctrl-names = "default";
Christoph Fritza1f4d172014-02-14 15:20:53 +0100179
180 hsusb1_2_pins: pinmux_hsusb1_2_pins {
181 pinctrl-single,pins = <
182 OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
183 OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
184 OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */
185 OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */
186 OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */
187 OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */
188 OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */
189 OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */
190 OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */
191 OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */
192 OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */
193 OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */
194 >;
195 };
196
197 gpio1_pins: pinmux_gpio1_pins {
198 pinctrl-single,pins = <
199 OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d15.gpio_29 */
200 >;
201 };
202
203};
204
205&gpio1 {
206 pinctrl-names = "default";
207 pinctrl-0 = <&gpio1_pins>;
208};
209
210&gpio6 {
211 pinctrl-names = "default";
212 pinctrl-0 = <&hsusb1_pins>;
213};
214
215&i2c1 {
216 clock-frequency = <2600000>;
217 pinctrl-names = "default";
218 pinctrl-0 = <&i2c1_pins>;
219
220 twl: twl@48 {
221 reg = <0x48>;
222 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
223 interrupt-parent = <&intc>;
224
225 twl_audio: audio {
226 compatible = "ti,twl4030-audio";
227 codec {
228 };
229 };
230 };
231};
232
233#include "twl4030.dtsi"
234#include "twl4030_omap3.dtsi"
235
236&twl {
237 vmmc1: regulator-vmmc1 {
238 regulator-always-on;
239 };
240
241 vdd1: regulator-vdd1 {
242 regulator-always-on;
243 };
244
245 vdd2: regulator-vdd2 {
246 regulator-always-on;
247 };
248};
249
250&i2c2 {
251 clock-frequency = <2600000>;
252 pinctrl-names = "default";
253 pinctrl-0 = <&i2c2_pins>;
254};
255
256&i2c3 {
257 clock-frequency = <2600000>;
258 pinctrl-names = "default";
259 pinctrl-0 = <&i2c3_pins>;
260 gpiom1: gpio@20 {
261 compatible = "mcp,mcp23017";
262 gpio-controller;
263 #gpio-cells = <2>;
264 reg = <0x20>;
265 };
266};
267
268&uart1 {
269 pinctrl-names = "default";
270 pinctrl-0 = <&uart1_pins>;
271};
272
273&uart2 {
274 pinctrl-names = "default";
275 pinctrl-0 = <&uart2_pins>;
276};
277
278&uart3 {
279 pinctrl-names = "default";
280 pinctrl-0 = <&uart3_pins>;
281};
282
283&uart4 {
284 status = "disabled";
285};
286
287&mmc1 {
288 cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
289 cd-inverted;
290 vmmc-supply = <&vmmc1>;
291 bus-width = <4>;
292 pinctrl-names = "default";
293 pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
294 cap-sdio-irq;
295 cap-sd-highspeed;
296 cap-mmc-highspeed;
297};
298
299&mmc2 {
300 status = "disabled";
301};
302
303&mmc3 {
304 status = "disabled";
305};
306
307&mcspi2 {
308 status = "okay";
309 pinctrl-names = "default";
310 pinctrl-0 = <&spi2_pins>;
311
312 tsc2046@0 {
313 reg = <0>; /* CS0 */
314 compatible = "ti,tsc2046";
315 interrupt-parent = <&gpio1>;
316 interrupts = <8 0>; /* boot6 / gpio_8 */
317 spi-max-frequency = <1000000>;
318 pendown-gpio = <&gpio1 8 0>;
319 vcc-supply = <&reg_vcc3>;
320 pinctrl-names = "default";
321 pinctrl-0 = <&tsc2048_pins>;
322
323 ti,x-min = <300>;
324 ti,x-max = <3000>;
325 ti,y-min = <600>;
326 ti,y-max = <3600>;
327 ti,x-plate-ohms = <80>;
328 ti,pressure-max = <255>;
329 ti,swap-xy;
330
331 linux,wakeup;
332 };
333};
334
335&usbhsehci {
336 phys = <&hsusb1_phy>;
337};
338
339&usbhshost {
340 pinctrl-names = "default";
341 pinctrl-0 = <&hsusb1_2_pins>;
342 num-ports = <2>;
343 port1-mode = "ehci-phy";
344};
345
346&usb_otg_hs {
347 pinctrl-names = "default";
348 pinctrl-0 = <&hsusb_otg_pins>;
349 interface-type = <0>;
350 usb-phy = <&usb2_phy>;
351 phys = <&usb2_phy>;
352 phy-names = "usb2-phy";
353 mode = <3>;
354 power = <50>;
355};
356
Christoph Fritz598fbdd02014-05-23 01:06:24 +0200357&mcbsp2 {
358 status = "okay";
359};
360
Christoph Fritza1f4d172014-02-14 15:20:53 +0100361&gpmc {
362 ranges = <0 0 0x30000000 0x1000000>,
363 <7 0 0x15000000 0x01000000>;
364
365 nand@0,0 {
366 reg = <0 0 0x1000000>;
367 nand-bus-width = <16>;
368 ti,nand-ecc-opt = "bch8";
369 /* no elm on omap3 */
370
371 gpmc,mux-add-data = <0>;
Christoph Fritza1f4d172014-02-14 15:20:53 +0100372 gpmc,device-width = <2>;
373 gpmc,wait-pin = <0>;
374 gpmc,wait-monitoring-ns = <0>;
375 gpmc,burst-length= <4>;
376 gpmc,cs-on-ns = <0>;
377 gpmc,cs-rd-off-ns = <100>;
378 gpmc,cs-wr-off-ns = <100>;
379 gpmc,adv-on-ns = <0>;
380 gpmc,adv-rd-off-ns = <100>;
381 gpmc,adv-wr-off-ns = <100>;
382 gpmc,oe-on-ns = <5>;
383 gpmc,oe-off-ns = <75>;
384 gpmc,we-on-ns = <5>;
385 gpmc,we-off-ns = <75>;
386 gpmc,rd-cycle-ns = <100>;
387 gpmc,wr-cycle-ns = <100>;
388 gpmc,access-ns = <60>;
389 gpmc,page-burst-access-ns = <5>;
390 gpmc,bus-turnaround-ns = <0>;
391 gpmc,cycle2cycle-samecsen;
392 gpmc,cycle2cycle-delay-ns = <50>;
393 gpmc,wr-data-mux-bus-ns = <75>;
394 gpmc,wr-access-ns = <155>;
395
396 #address-cells = <1>;
397 #size-cells = <1>;
398
399 partition@0 {
400 label = "MLO";
401 reg = <0 0x80000>;
402 };
403
404 partition@0x80000 {
405 label = "u-boot";
406 reg = <0x80000 0x1e0000>;
407 };
408
409 partition@0x260000 {
410 label = "u-boot-environment";
411 reg = <0x260000 0x20000>;
412 };
413
414 partition@0x280000 {
415 label = "kernel";
416 reg = <0x280000 0x500000>;
417 };
418
419 partition@0x780000 {
420 label = "filesystem";
421 reg = <0x780000 0xf880000>;
422 };
423 };
424
425 ethernet@7,0 {
426 compatible = "smsc,lan9221", "smsc,lan9115";
427 bank-width = <2>;
428 gpmc,mux-add-data = <2>;
429 gpmc,cs-on-ns = <10>;
430 gpmc,cs-rd-off-ns = <60>;
431 gpmc,cs-wr-off-ns = <60>;
432 gpmc,adv-on-ns = <0>;
433 gpmc,adv-rd-off-ns = <10>;
434 gpmc,adv-wr-off-ns = <10>;
435 gpmc,oe-on-ns = <10>;
436 gpmc,oe-off-ns = <60>;
437 gpmc,we-on-ns = <10>;
438 gpmc,we-off-ns = <60>;
439 gpmc,rd-cycle-ns = <100>;
440 gpmc,wr-cycle-ns = <100>;
441 gpmc,access-ns = <50>;
442 gpmc,page-burst-access-ns = <5>;
443 gpmc,bus-turnaround-ns = <0>;
444 gpmc,cycle2cycle-delay-ns = <75>;
445 gpmc,wr-data-mux-bus-ns = <15>;
446 gpmc,wr-access-ns = <75>;
447 gpmc,cycle2cycle-samecsen;
448 gpmc,cycle2cycle-diffcsen;
449 vddvario-supply = <&reg_vcc3>;
450 vdd33a-supply = <&reg_vcc3>;
451 reg-io-width = <4>;
452 interrupt-parent = <&gpio5>;
453 interrupts = <1 0x2>;
454 reg = <7 0 0xff>;
455 pinctrl-names = "default";
456 pinctrl-0 = <&lan9221_pins>;
457 phy-mode = "mii";
458 };
459};