blob: 999725ca8d099c2c2ebcfafe8c9885bebbd17c66 [file] [log] [blame]
Jeff Garzik1fdffbc2006-02-09 05:15:27 -05001/*
2 * libata-bmdma.c - helper library for PCI IDE BMDMA
3 *
4 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
5 * Please ALWAYS copy linux-ide@vger.kernel.org
6 * on emails.
7 *
8 * Copyright 2003-2006 Red Hat, Inc. All rights reserved.
9 * Copyright 2003-2006 Jeff Garzik
10 *
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2, or (at your option)
15 * any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; see the file COPYING. If not, write to
24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
25 *
26 *
27 * libata documentation is available via 'make {ps|pdf}docs',
28 * as Documentation/DocBook/libata.*
29 *
30 * Hardware documentation available from http://www.t13.org/ and
31 * http://www.sata-io.org/
32 *
33 */
34
35#include <linux/config.h>
36#include <linux/kernel.h>
37#include <linux/pci.h>
38#include <linux/libata.h>
39
40#include "libata.h"
41
42/**
43 * ata_tf_load_pio - send taskfile registers to host controller
44 * @ap: Port to which output is sent
45 * @tf: ATA taskfile register set
46 *
47 * Outputs ATA taskfile to standard ATA host controller.
48 *
49 * LOCKING:
50 * Inherited from caller.
51 */
52
53static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf)
54{
55 struct ata_ioports *ioaddr = &ap->ioaddr;
56 unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
57
58 if (tf->ctl != ap->last_ctl) {
59 outb(tf->ctl, ioaddr->ctl_addr);
60 ap->last_ctl = tf->ctl;
61 ata_wait_idle(ap);
62 }
63
64 if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
65 outb(tf->hob_feature, ioaddr->feature_addr);
66 outb(tf->hob_nsect, ioaddr->nsect_addr);
67 outb(tf->hob_lbal, ioaddr->lbal_addr);
68 outb(tf->hob_lbam, ioaddr->lbam_addr);
69 outb(tf->hob_lbah, ioaddr->lbah_addr);
70 VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
71 tf->hob_feature,
72 tf->hob_nsect,
73 tf->hob_lbal,
74 tf->hob_lbam,
75 tf->hob_lbah);
76 }
77
78 if (is_addr) {
79 outb(tf->feature, ioaddr->feature_addr);
80 outb(tf->nsect, ioaddr->nsect_addr);
81 outb(tf->lbal, ioaddr->lbal_addr);
82 outb(tf->lbam, ioaddr->lbam_addr);
83 outb(tf->lbah, ioaddr->lbah_addr);
84 VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
85 tf->feature,
86 tf->nsect,
87 tf->lbal,
88 tf->lbam,
89 tf->lbah);
90 }
91
92 if (tf->flags & ATA_TFLAG_DEVICE) {
93 outb(tf->device, ioaddr->device_addr);
94 VPRINTK("device 0x%X\n", tf->device);
95 }
96
97 ata_wait_idle(ap);
98}
99
100/**
101 * ata_tf_load_mmio - send taskfile registers to host controller
102 * @ap: Port to which output is sent
103 * @tf: ATA taskfile register set
104 *
105 * Outputs ATA taskfile to standard ATA host controller using MMIO.
106 *
107 * LOCKING:
108 * Inherited from caller.
109 */
110
111static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
112{
113 struct ata_ioports *ioaddr = &ap->ioaddr;
114 unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
115
116 if (tf->ctl != ap->last_ctl) {
117 writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr);
118 ap->last_ctl = tf->ctl;
119 ata_wait_idle(ap);
120 }
121
122 if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
123 writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr);
124 writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr);
125 writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr);
126 writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr);
127 writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr);
128 VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
129 tf->hob_feature,
130 tf->hob_nsect,
131 tf->hob_lbal,
132 tf->hob_lbam,
133 tf->hob_lbah);
134 }
135
136 if (is_addr) {
137 writeb(tf->feature, (void __iomem *) ioaddr->feature_addr);
138 writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr);
139 writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr);
140 writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr);
141 writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr);
142 VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
143 tf->feature,
144 tf->nsect,
145 tf->lbal,
146 tf->lbam,
147 tf->lbah);
148 }
149
150 if (tf->flags & ATA_TFLAG_DEVICE) {
151 writeb(tf->device, (void __iomem *) ioaddr->device_addr);
152 VPRINTK("device 0x%X\n", tf->device);
153 }
154
155 ata_wait_idle(ap);
156}
157
158
159/**
160 * ata_tf_load - send taskfile registers to host controller
161 * @ap: Port to which output is sent
162 * @tf: ATA taskfile register set
163 *
164 * Outputs ATA taskfile to standard ATA host controller using MMIO
165 * or PIO as indicated by the ATA_FLAG_MMIO flag.
166 * Writes the control, feature, nsect, lbal, lbam, and lbah registers.
167 * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
168 * hob_lbal, hob_lbam, and hob_lbah.
169 *
170 * This function waits for idle (!BUSY and !DRQ) after writing
171 * registers. If the control register has a new value, this
172 * function also waits for idle after writing control and before
173 * writing the remaining registers.
174 *
175 * May be used as the tf_load() entry in ata_port_operations.
176 *
177 * LOCKING:
178 * Inherited from caller.
179 */
180void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
181{
182 if (ap->flags & ATA_FLAG_MMIO)
183 ata_tf_load_mmio(ap, tf);
184 else
185 ata_tf_load_pio(ap, tf);
186}
187
188/**
189 * ata_exec_command_pio - issue ATA command to host controller
190 * @ap: port to which command is being issued
191 * @tf: ATA taskfile register set
192 *
193 * Issues PIO write to ATA command register, with proper
194 * synchronization with interrupt handler / other threads.
195 *
196 * LOCKING:
197 * spin_lock_irqsave(host_set lock)
198 */
199
200static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf)
201{
202 DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
203
204 outb(tf->command, ap->ioaddr.command_addr);
205 ata_pause(ap);
206}
207
208
209/**
210 * ata_exec_command_mmio - issue ATA command to host controller
211 * @ap: port to which command is being issued
212 * @tf: ATA taskfile register set
213 *
214 * Issues MMIO write to ATA command register, with proper
215 * synchronization with interrupt handler / other threads.
216 *
217 * LOCKING:
218 * spin_lock_irqsave(host_set lock)
219 */
220
221static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
222{
223 DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
224
225 writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr);
226 ata_pause(ap);
227}
228
229
230/**
231 * ata_exec_command - issue ATA command to host controller
232 * @ap: port to which command is being issued
233 * @tf: ATA taskfile register set
234 *
235 * Issues PIO/MMIO write to ATA command register, with proper
236 * synchronization with interrupt handler / other threads.
237 *
238 * LOCKING:
239 * spin_lock_irqsave(host_set lock)
240 */
241void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
242{
243 if (ap->flags & ATA_FLAG_MMIO)
244 ata_exec_command_mmio(ap, tf);
245 else
246 ata_exec_command_pio(ap, tf);
247}
248
249/**
250 * ata_tf_read_pio - input device's ATA taskfile shadow registers
251 * @ap: Port from which input is read
252 * @tf: ATA taskfile register set for storing input
253 *
254 * Reads ATA taskfile registers for currently-selected device
255 * into @tf.
256 *
257 * LOCKING:
258 * Inherited from caller.
259 */
260
261static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf)
262{
263 struct ata_ioports *ioaddr = &ap->ioaddr;
264
265 tf->command = ata_check_status(ap);
266 tf->feature = inb(ioaddr->error_addr);
267 tf->nsect = inb(ioaddr->nsect_addr);
268 tf->lbal = inb(ioaddr->lbal_addr);
269 tf->lbam = inb(ioaddr->lbam_addr);
270 tf->lbah = inb(ioaddr->lbah_addr);
271 tf->device = inb(ioaddr->device_addr);
272
273 if (tf->flags & ATA_TFLAG_LBA48) {
274 outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
275 tf->hob_feature = inb(ioaddr->error_addr);
276 tf->hob_nsect = inb(ioaddr->nsect_addr);
277 tf->hob_lbal = inb(ioaddr->lbal_addr);
278 tf->hob_lbam = inb(ioaddr->lbam_addr);
279 tf->hob_lbah = inb(ioaddr->lbah_addr);
280 }
281}
282
283/**
284 * ata_tf_read_mmio - input device's ATA taskfile shadow registers
285 * @ap: Port from which input is read
286 * @tf: ATA taskfile register set for storing input
287 *
288 * Reads ATA taskfile registers for currently-selected device
289 * into @tf via MMIO.
290 *
291 * LOCKING:
292 * Inherited from caller.
293 */
294
295static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf)
296{
297 struct ata_ioports *ioaddr = &ap->ioaddr;
298
299 tf->command = ata_check_status(ap);
300 tf->feature = readb((void __iomem *)ioaddr->error_addr);
301 tf->nsect = readb((void __iomem *)ioaddr->nsect_addr);
302 tf->lbal = readb((void __iomem *)ioaddr->lbal_addr);
303 tf->lbam = readb((void __iomem *)ioaddr->lbam_addr);
304 tf->lbah = readb((void __iomem *)ioaddr->lbah_addr);
305 tf->device = readb((void __iomem *)ioaddr->device_addr);
306
307 if (tf->flags & ATA_TFLAG_LBA48) {
308 writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr);
309 tf->hob_feature = readb((void __iomem *)ioaddr->error_addr);
310 tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr);
311 tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr);
312 tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr);
313 tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr);
314 }
315}
316
317
318/**
319 * ata_tf_read - input device's ATA taskfile shadow registers
320 * @ap: Port from which input is read
321 * @tf: ATA taskfile register set for storing input
322 *
323 * Reads ATA taskfile registers for currently-selected device
324 * into @tf.
325 *
326 * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48
327 * is set, also reads the hob registers.
328 *
329 * May be used as the tf_read() entry in ata_port_operations.
330 *
331 * LOCKING:
332 * Inherited from caller.
333 */
334void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
335{
336 if (ap->flags & ATA_FLAG_MMIO)
337 ata_tf_read_mmio(ap, tf);
338 else
339 ata_tf_read_pio(ap, tf);
340}
341
342/**
343 * ata_check_status_pio - Read device status reg & clear interrupt
344 * @ap: port where the device is
345 *
346 * Reads ATA taskfile status register for currently-selected device
347 * and return its value. This also clears pending interrupts
348 * from this device
349 *
350 * LOCKING:
351 * Inherited from caller.
352 */
353static u8 ata_check_status_pio(struct ata_port *ap)
354{
355 return inb(ap->ioaddr.status_addr);
356}
357
358/**
359 * ata_check_status_mmio - Read device status reg & clear interrupt
360 * @ap: port where the device is
361 *
362 * Reads ATA taskfile status register for currently-selected device
363 * via MMIO and return its value. This also clears pending interrupts
364 * from this device
365 *
366 * LOCKING:
367 * Inherited from caller.
368 */
369static u8 ata_check_status_mmio(struct ata_port *ap)
370{
371 return readb((void __iomem *) ap->ioaddr.status_addr);
372}
373
374
375/**
376 * ata_check_status - Read device status reg & clear interrupt
377 * @ap: port where the device is
378 *
379 * Reads ATA taskfile status register for currently-selected device
380 * and return its value. This also clears pending interrupts
381 * from this device
382 *
383 * May be used as the check_status() entry in ata_port_operations.
384 *
385 * LOCKING:
386 * Inherited from caller.
387 */
388u8 ata_check_status(struct ata_port *ap)
389{
390 if (ap->flags & ATA_FLAG_MMIO)
391 return ata_check_status_mmio(ap);
392 return ata_check_status_pio(ap);
393}
394
395
396/**
397 * ata_altstatus - Read device alternate status reg
398 * @ap: port where the device is
399 *
400 * Reads ATA taskfile alternate status register for
401 * currently-selected device and return its value.
402 *
403 * Note: may NOT be used as the check_altstatus() entry in
404 * ata_port_operations.
405 *
406 * LOCKING:
407 * Inherited from caller.
408 */
409u8 ata_altstatus(struct ata_port *ap)
410{
411 if (ap->ops->check_altstatus)
412 return ap->ops->check_altstatus(ap);
413
414 if (ap->flags & ATA_FLAG_MMIO)
415 return readb((void __iomem *)ap->ioaddr.altstatus_addr);
416 return inb(ap->ioaddr.altstatus_addr);
417}
418
419#ifdef CONFIG_PCI
420static struct ata_probe_ent *
421ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
422{
423 struct ata_probe_ent *probe_ent;
424
425 probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
426 if (!probe_ent) {
427 printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
428 kobject_name(&(dev->kobj)));
429 return NULL;
430 }
431
432 INIT_LIST_HEAD(&probe_ent->node);
433 probe_ent->dev = dev;
434
435 probe_ent->sht = port->sht;
436 probe_ent->host_flags = port->host_flags;
437 probe_ent->pio_mask = port->pio_mask;
438 probe_ent->mwdma_mask = port->mwdma_mask;
439 probe_ent->udma_mask = port->udma_mask;
440 probe_ent->port_ops = port->port_ops;
441
442 return probe_ent;
443}
444
445
446/**
447 * ata_pci_init_native_mode - Initialize native-mode driver
448 * @pdev: pci device to be initialized
449 * @port: array[2] of pointers to port info structures.
450 * @ports: bitmap of ports present
451 *
452 * Utility function which allocates and initializes an
453 * ata_probe_ent structure for a standard dual-port
454 * PIO-based IDE controller. The returned ata_probe_ent
455 * structure can be passed to ata_device_add(). The returned
456 * ata_probe_ent structure should then be freed with kfree().
457 *
458 * The caller need only pass the address of the primary port, the
459 * secondary will be deduced automatically. If the device has non
460 * standard secondary port mappings this function can be called twice,
461 * once for each interface.
462 */
463
464struct ata_probe_ent *
465ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports)
466{
467 struct ata_probe_ent *probe_ent =
468 ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
469 int p = 0;
470
471 if (!probe_ent)
472 return NULL;
473
474 probe_ent->irq = pdev->irq;
475 probe_ent->irq_flags = SA_SHIRQ;
476 probe_ent->private_data = port[0]->private_data;
477
478 if (ports & ATA_PORT_PRIMARY) {
479 probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0);
480 probe_ent->port[p].altstatus_addr =
481 probe_ent->port[p].ctl_addr =
482 pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
483 probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4);
484 ata_std_ports(&probe_ent->port[p]);
485 p++;
486 }
487
488 if (ports & ATA_PORT_SECONDARY) {
489 probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2);
490 probe_ent->port[p].altstatus_addr =
491 probe_ent->port[p].ctl_addr =
492 pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
493 probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8;
494 ata_std_ports(&probe_ent->port[p]);
495 p++;
496 }
497
498 probe_ent->n_ports = p;
499 return probe_ent;
500}
501
502
503static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
504 struct ata_port_info *port, int port_num)
505{
506 struct ata_probe_ent *probe_ent;
507
508 probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port);
509 if (!probe_ent)
510 return NULL;
511
512 probe_ent->legacy_mode = 1;
513 probe_ent->n_ports = 1;
514 probe_ent->hard_port_no = port_num;
515 probe_ent->private_data = port->private_data;
516
517 switch(port_num)
518 {
519 case 0:
520 probe_ent->irq = 14;
521 probe_ent->port[0].cmd_addr = 0x1f0;
522 probe_ent->port[0].altstatus_addr =
523 probe_ent->port[0].ctl_addr = 0x3f6;
524 break;
525 case 1:
526 probe_ent->irq = 15;
527 probe_ent->port[0].cmd_addr = 0x170;
528 probe_ent->port[0].altstatus_addr =
529 probe_ent->port[0].ctl_addr = 0x376;
530 break;
531 }
532
533 probe_ent->port[0].bmdma_addr =
534 pci_resource_start(pdev, 4) + 8 * port_num;
535 ata_std_ports(&probe_ent->port[0]);
536
537 return probe_ent;
538}
539
540
541/**
542 * ata_pci_init_one - Initialize/register PCI IDE host controller
543 * @pdev: Controller to be initialized
544 * @port_info: Information from low-level host driver
545 * @n_ports: Number of ports attached to host controller
546 *
547 * This is a helper function which can be called from a driver's
548 * xxx_init_one() probe function if the hardware uses traditional
549 * IDE taskfile registers.
550 *
551 * This function calls pci_enable_device(), reserves its register
552 * regions, sets the dma mask, enables bus master mode, and calls
553 * ata_device_add()
554 *
555 * LOCKING:
556 * Inherited from PCI layer (may sleep).
557 *
558 * RETURNS:
559 * Zero on success, negative on errno-based value on error.
560 */
561
562int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
563 unsigned int n_ports)
564{
565 struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL;
566 struct ata_port_info *port[2];
567 u8 tmp8, mask;
568 unsigned int legacy_mode = 0;
569 int disable_dev_on_err = 1;
570 int rc;
571
572 DPRINTK("ENTER\n");
573
574 port[0] = port_info[0];
575 if (n_ports > 1)
576 port[1] = port_info[1];
577 else
578 port[1] = port[0];
579
580 if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0
581 && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
582 /* TODO: What if one channel is in native mode ... */
583 pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
584 mask = (1 << 2) | (1 << 0);
585 if ((tmp8 & mask) != mask)
586 legacy_mode = (1 << 3);
587 }
588
589 /* FIXME... */
590 if ((!legacy_mode) && (n_ports > 2)) {
591 printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n");
592 n_ports = 2;
593 /* For now */
594 }
595
596 /* FIXME: Really for ATA it isn't safe because the device may be
597 multi-purpose and we want to leave it alone if it was already
598 enabled. Secondly for shared use as Arjan says we want refcounting
599
600 Checking dev->is_enabled is insufficient as this is not set at
601 boot for the primary video which is BIOS enabled
602 */
603
604 rc = pci_enable_device(pdev);
605 if (rc)
606 return rc;
607
608 rc = pci_request_regions(pdev, DRV_NAME);
609 if (rc) {
610 disable_dev_on_err = 0;
611 goto err_out;
612 }
613
614 /* FIXME: Should use platform specific mappers for legacy port ranges */
615 if (legacy_mode) {
616 if (!request_region(0x1f0, 8, "libata")) {
617 struct resource *conflict, res;
618 res.start = 0x1f0;
619 res.end = 0x1f0 + 8 - 1;
620 conflict = ____request_resource(&ioport_resource, &res);
621 if (!strcmp(conflict->name, "libata"))
622 legacy_mode |= (1 << 0);
623 else {
624 disable_dev_on_err = 0;
625 printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n");
626 }
627 } else
628 legacy_mode |= (1 << 0);
629
630 if (!request_region(0x170, 8, "libata")) {
631 struct resource *conflict, res;
632 res.start = 0x170;
633 res.end = 0x170 + 8 - 1;
634 conflict = ____request_resource(&ioport_resource, &res);
635 if (!strcmp(conflict->name, "libata"))
636 legacy_mode |= (1 << 1);
637 else {
638 disable_dev_on_err = 0;
639 printk(KERN_WARNING "ata: 0x170 IDE port busy\n");
640 }
641 } else
642 legacy_mode |= (1 << 1);
643 }
644
645 /* we have legacy mode, but all ports are unavailable */
646 if (legacy_mode == (1 << 3)) {
647 rc = -EBUSY;
648 goto err_out_regions;
649 }
650
Alan Cox41bbc8b2006-03-21 15:57:00 +0000651 /* FIXME: If we get no DMA mask we should fall back to PIO */
Jeff Garzik1fdffbc2006-02-09 05:15:27 -0500652 rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
653 if (rc)
654 goto err_out_regions;
655 rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
656 if (rc)
657 goto err_out_regions;
658
659 if (legacy_mode) {
660 if (legacy_mode & (1 << 0))
661 probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0);
662 if (legacy_mode & (1 << 1))
663 probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1);
664 } else {
665 if (n_ports == 2)
666 probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
667 else
668 probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY);
669 }
670 if (!probe_ent && !probe_ent2) {
671 rc = -ENOMEM;
672 goto err_out_regions;
673 }
674
675 pci_set_master(pdev);
676
677 /* FIXME: check ata_device_add return */
678 if (legacy_mode) {
679 if (legacy_mode & (1 << 0))
680 ata_device_add(probe_ent);
681 if (legacy_mode & (1 << 1))
682 ata_device_add(probe_ent2);
683 } else
684 ata_device_add(probe_ent);
685
686 kfree(probe_ent);
687 kfree(probe_ent2);
688
689 return 0;
690
691err_out_regions:
692 if (legacy_mode & (1 << 0))
693 release_region(0x1f0, 8);
694 if (legacy_mode & (1 << 1))
695 release_region(0x170, 8);
696 pci_release_regions(pdev);
697err_out:
698 if (disable_dev_on_err)
699 pci_disable_device(pdev);
700 return rc;
701}
702
Alan Coxd33d44f2006-03-21 15:59:57 +0000703/**
704 * ata_pci_clear_simplex - attempt to kick device out of simplex
705 * @pdev: PCI device
706 *
707 * Some PCI ATA devices report simplex mode but in fact can be told to
708 * enter non simplex mode. This implements the neccessary logic to
709 * perform the task on such devices. Calling it on other devices will
710 * have -undefined- behaviour.
711 */
712
713int ata_pci_clear_simplex(struct pci_dev *pdev)
714{
715 unsigned long bmdma = pci_resource_start(pdev, 4);
716 u8 simplex;
717
718 if (bmdma == 0)
719 return -ENOENT;
720
721 simplex = inb(bmdma + 0x02);
722 outb(simplex & 0x60, bmdma + 0x02);
723 simplex = inb(bmdma + 0x02);
724 if (simplex & 0x80)
725 return -EOPNOTSUPP;
726 return 0;
727}
728
729unsigned long ata_pci_default_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long xfer_mask)
730{
731 /* Filter out DMA modes if the device has been configured by
732 the BIOS as PIO only */
733
734 if (ap->ioaddr.bmdma_addr == 0)
735 xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
736 return xfer_mask;
737}
738
Jeff Garzik1fdffbc2006-02-09 05:15:27 -0500739#endif /* CONFIG_PCI */
740