blob: 8bb37bba68f0c32ea3f6a2c1fecdcf198e053d1b [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Helpfile for jazzdma.c -- Mips Jazz R4030 DMA controller support
3 */
4#ifndef _ASM_JAZZDMA_H
5#define _ASM_JAZZDMA_H
6
7/*
8 * Prototypes and macros
9 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070010extern unsigned long vdma_alloc(unsigned long paddr, unsigned long size);
11extern int vdma_free(unsigned long laddr);
12extern int vdma_remap(unsigned long laddr, unsigned long paddr,
13 unsigned long size);
14extern unsigned long vdma_phys2log(unsigned long paddr);
15extern unsigned long vdma_log2phys(unsigned long laddr);
16extern void vdma_stats(void); /* for debugging only */
17
18extern void vdma_enable(int channel);
19extern void vdma_disable(int channel);
20extern void vdma_set_mode(int channel, int mode);
21extern void vdma_set_addr(int channel, long addr);
22extern void vdma_set_count(int channel, int count);
23extern int vdma_get_residue(int channel);
24extern int vdma_get_enable(int channel);
25
26/*
27 * some definitions used by the driver functions
28 */
29#define VDMA_PAGESIZE 4096
30#define VDMA_PGTBL_ENTRIES 4096
31#define VDMA_PGTBL_SIZE (sizeof(VDMA_PGTBL_ENTRY) * VDMA_PGTBL_ENTRIES)
32#define VDMA_PAGE_EMPTY 0xff000000
33
34/*
35 * Macros to get page no. and offset of a given address
36 * Note that VDMA_PAGE() works for physical addresses only
37 */
38#define VDMA_PAGE(a) ((unsigned int)(a) >> 12)
39#define VDMA_OFFSET(a) ((unsigned int)(a) & (VDMA_PAGESIZE-1))
40
41/*
42 * error code returned by vdma_alloc()
43 * (See also arch/mips/kernel/jazzdma.c)
44 */
45#define VDMA_ERROR 0xffffffff
46
47/*
48 * VDMA pagetable entry description
49 */
50typedef volatile struct VDMA_PGTBL_ENTRY {
51 unsigned int frame; /* physical frame no. */
52 unsigned int owner; /* owner of this entry (0=free) */
53} VDMA_PGTBL_ENTRY;
54
55
56/*
57 * DMA channel control registers
58 * in the R4030 MCT_ADR chip
59 */
60#define JAZZ_R4030_CHNL_MODE 0xE0000100 /* 8 DMA Channel Mode Registers, */
61 /* 0xE0000100,120,140... */
62#define JAZZ_R4030_CHNL_ENABLE 0xE0000108 /* 8 DMA Channel Enable Regs, */
63 /* 0xE0000108,128,148... */
64#define JAZZ_R4030_CHNL_COUNT 0xE0000110 /* 8 DMA Channel Byte Cnt Regs, */
65 /* 0xE0000110,130,150... */
66#define JAZZ_R4030_CHNL_ADDR 0xE0000118 /* 8 DMA Channel Address Regs, */
67 /* 0xE0000118,138,158... */
68
69/* channel enable register bits */
70
71#define R4030_CHNL_ENABLE (1<<0)
72#define R4030_CHNL_WRITE (1<<1)
73#define R4030_TC_INTR (1<<8)
74#define R4030_MEM_INTR (1<<9)
75#define R4030_ADDR_INTR (1<<10)
76
77/*
78 * Channel mode register bits
79 */
80#define R4030_MODE_ATIME_40 (0) /* device access time on remote bus */
81#define R4030_MODE_ATIME_80 (1)
82#define R4030_MODE_ATIME_120 (2)
83#define R4030_MODE_ATIME_160 (3)
84#define R4030_MODE_ATIME_200 (4)
85#define R4030_MODE_ATIME_240 (5)
86#define R4030_MODE_ATIME_280 (6)
87#define R4030_MODE_ATIME_320 (7)
88#define R4030_MODE_WIDTH_8 (1<<3) /* device data bus width */
89#define R4030_MODE_WIDTH_16 (2<<3)
90#define R4030_MODE_WIDTH_32 (3<<3)
91#define R4030_MODE_INTR_EN (1<<5)
92#define R4030_MODE_BURST (1<<6) /* Rev. 2 only */
93#define R4030_MODE_FAST_ACK (1<<7) /* Rev. 2 only */
94
95#endif /* _ASM_JAZZDMA_H */