blob: d852f83f890046b2cdc07b856c05173615873934 [file] [log] [blame]
Ben Dooksb4975492008-07-03 12:32:51 +01001/* linux/drivers/serial/samsuing.c
2 *
3 * Driver core for Samsung SoC onboard UARTs.
4 *
5 * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
6 * http://armlinux.simtec.co.uk/
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13/* Hote on 2410 error handling
14 *
15 * The s3c2410 manual has a love/hate affair with the contents of the
16 * UERSTAT register in the UART blocks, and keeps marking some of the
17 * error bits as reserved. Having checked with the s3c2410x01,
18 * it copes with BREAKs properly, so I am happy to ignore the RESERVED
19 * feature from the latter versions of the manual.
20 *
21 * If it becomes aparrent that latter versions of the 2410 remove these
22 * bits, then action will have to be taken to differentiate the versions
23 * and change the policy on BREAK
24 *
25 * BJD, 04-Nov-2004
26*/
27
28#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
29#define SUPPORT_SYSRQ
30#endif
31
32#include <linux/module.h>
33#include <linux/ioport.h>
34#include <linux/io.h>
35#include <linux/platform_device.h>
36#include <linux/init.h>
37#include <linux/sysrq.h>
38#include <linux/console.h>
39#include <linux/tty.h>
40#include <linux/tty_flip.h>
41#include <linux/serial_core.h>
42#include <linux/serial.h>
43#include <linux/delay.h>
44#include <linux/clk.h>
45
46#include <asm/irq.h>
47
48#include <asm/hardware.h>
49
50#include <asm/plat-s3c/regs-serial.h>
51#include <asm/arch/regs-gpio.h>
52
53#include "samsung.h"
54
55/* UART name and device definitions */
56
57#define S3C24XX_SERIAL_NAME "ttySAC"
58#define S3C24XX_SERIAL_MAJOR 204
59#define S3C24XX_SERIAL_MINOR 64
60
61/* we can support 3 uarts, but not always use them */
62
63#ifdef CONFIG_CPU_S3C2400
64#define NR_PORTS (2)
65#else
66#define NR_PORTS (3)
67#endif
68
69/* port irq numbers */
70
71#define TX_IRQ(port) ((port)->irq + 1)
72#define RX_IRQ(port) ((port)->irq)
73
74/* macros to change one thing to another */
75
76#define tx_enabled(port) ((port)->unused[0])
77#define rx_enabled(port) ((port)->unused[1])
78
79/* flag to ignore all characters comming in */
80#define RXSTAT_DUMMY_READ (0x10000000)
81
82static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
83{
84 return container_of(port, struct s3c24xx_uart_port, port);
85}
86
87/* translate a port to the device name */
88
89static inline const char *s3c24xx_serial_portname(struct uart_port *port)
90{
91 return to_platform_device(port->dev)->name;
92}
93
94static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
95{
96 return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE);
97}
98
99static void s3c24xx_serial_rx_enable(struct uart_port *port)
100{
101 unsigned long flags;
102 unsigned int ucon, ufcon;
103 int count = 10000;
104
105 spin_lock_irqsave(&port->lock, flags);
106
107 while (--count && !s3c24xx_serial_txempty_nofifo(port))
108 udelay(100);
109
110 ufcon = rd_regl(port, S3C2410_UFCON);
111 ufcon |= S3C2410_UFCON_RESETRX;
112 wr_regl(port, S3C2410_UFCON, ufcon);
113
114 ucon = rd_regl(port, S3C2410_UCON);
115 ucon |= S3C2410_UCON_RXIRQMODE;
116 wr_regl(port, S3C2410_UCON, ucon);
117
118 rx_enabled(port) = 1;
119 spin_unlock_irqrestore(&port->lock, flags);
120}
121
122static void s3c24xx_serial_rx_disable(struct uart_port *port)
123{
124 unsigned long flags;
125 unsigned int ucon;
126
127 spin_lock_irqsave(&port->lock, flags);
128
129 ucon = rd_regl(port, S3C2410_UCON);
130 ucon &= ~S3C2410_UCON_RXIRQMODE;
131 wr_regl(port, S3C2410_UCON, ucon);
132
133 rx_enabled(port) = 0;
134 spin_unlock_irqrestore(&port->lock, flags);
135}
136
137static void s3c24xx_serial_stop_tx(struct uart_port *port)
138{
139 if (tx_enabled(port)) {
140 disable_irq(TX_IRQ(port));
141 tx_enabled(port) = 0;
142 if (port->flags & UPF_CONS_FLOW)
143 s3c24xx_serial_rx_enable(port);
144 }
145}
146
147static void s3c24xx_serial_start_tx(struct uart_port *port)
148{
149 if (!tx_enabled(port)) {
150 if (port->flags & UPF_CONS_FLOW)
151 s3c24xx_serial_rx_disable(port);
152
153 enable_irq(TX_IRQ(port));
154 tx_enabled(port) = 1;
155 }
156}
157
158
159static void s3c24xx_serial_stop_rx(struct uart_port *port)
160{
161 if (rx_enabled(port)) {
162 dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
163 disable_irq(RX_IRQ(port));
164 rx_enabled(port) = 0;
165 }
166}
167
168static void s3c24xx_serial_enable_ms(struct uart_port *port)
169{
170}
171
172static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port)
173{
174 return to_ourport(port)->info;
175}
176
177static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
178{
179 if (port->dev == NULL)
180 return NULL;
181
182 return (struct s3c2410_uartcfg *)port->dev->platform_data;
183}
184
185static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
186 unsigned long ufstat)
187{
188 struct s3c24xx_uart_info *info = ourport->info;
189
190 if (ufstat & info->rx_fifofull)
191 return info->fifosize;
192
193 return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
194}
195
196
197/* ? - where has parity gone?? */
198#define S3C2410_UERSTAT_PARITY (0x1000)
199
200static irqreturn_t
201s3c24xx_serial_rx_chars(int irq, void *dev_id)
202{
203 struct s3c24xx_uart_port *ourport = dev_id;
204 struct uart_port *port = &ourport->port;
Alan Coxf10140f2008-07-22 15:25:07 +0100205 struct tty_struct *tty = port->info->port.tty;
Ben Dooksb4975492008-07-03 12:32:51 +0100206 unsigned int ufcon, ch, flag, ufstat, uerstat;
207 int max_count = 64;
208
209 while (max_count-- > 0) {
210 ufcon = rd_regl(port, S3C2410_UFCON);
211 ufstat = rd_regl(port, S3C2410_UFSTAT);
212
213 if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
214 break;
215
216 uerstat = rd_regl(port, S3C2410_UERSTAT);
217 ch = rd_regb(port, S3C2410_URXH);
218
219 if (port->flags & UPF_CONS_FLOW) {
220 int txe = s3c24xx_serial_txempty_nofifo(port);
221
222 if (rx_enabled(port)) {
223 if (!txe) {
224 rx_enabled(port) = 0;
225 continue;
226 }
227 } else {
228 if (txe) {
229 ufcon |= S3C2410_UFCON_RESETRX;
230 wr_regl(port, S3C2410_UFCON, ufcon);
231 rx_enabled(port) = 1;
232 goto out;
233 }
234 continue;
235 }
236 }
237
238 /* insert the character into the buffer */
239
240 flag = TTY_NORMAL;
241 port->icount.rx++;
242
243 if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
244 dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
245 ch, uerstat);
246
247 /* check for break */
248 if (uerstat & S3C2410_UERSTAT_BREAK) {
249 dbg("break!\n");
250 port->icount.brk++;
251 if (uart_handle_break(port))
252 goto ignore_char;
253 }
254
255 if (uerstat & S3C2410_UERSTAT_FRAME)
256 port->icount.frame++;
257 if (uerstat & S3C2410_UERSTAT_OVERRUN)
258 port->icount.overrun++;
259
260 uerstat &= port->read_status_mask;
261
262 if (uerstat & S3C2410_UERSTAT_BREAK)
263 flag = TTY_BREAK;
264 else if (uerstat & S3C2410_UERSTAT_PARITY)
265 flag = TTY_PARITY;
266 else if (uerstat & (S3C2410_UERSTAT_FRAME |
267 S3C2410_UERSTAT_OVERRUN))
268 flag = TTY_FRAME;
269 }
270
271 if (uart_handle_sysrq_char(port, ch))
272 goto ignore_char;
273
274 uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN,
275 ch, flag);
276
277 ignore_char:
278 continue;
279 }
280 tty_flip_buffer_push(tty);
281
282 out:
283 return IRQ_HANDLED;
284}
285
286static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
287{
288 struct s3c24xx_uart_port *ourport = id;
289 struct uart_port *port = &ourport->port;
290 struct circ_buf *xmit = &port->info->xmit;
291 int count = 256;
292
293 if (port->x_char) {
294 wr_regb(port, S3C2410_UTXH, port->x_char);
295 port->icount.tx++;
296 port->x_char = 0;
297 goto out;
298 }
299
300 /* if there isnt anything more to transmit, or the uart is now
301 * stopped, disable the uart and exit
302 */
303
304 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
305 s3c24xx_serial_stop_tx(port);
306 goto out;
307 }
308
309 /* try and drain the buffer... */
310
311 while (!uart_circ_empty(xmit) && count-- > 0) {
312 if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
313 break;
314
315 wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
316 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
317 port->icount.tx++;
318 }
319
320 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
321 uart_write_wakeup(port);
322
323 if (uart_circ_empty(xmit))
324 s3c24xx_serial_stop_tx(port);
325
326 out:
327 return IRQ_HANDLED;
328}
329
330static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
331{
332 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
333 unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
334 unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
335
336 if (ufcon & S3C2410_UFCON_FIFOMODE) {
337 if ((ufstat & info->tx_fifomask) != 0 ||
338 (ufstat & info->tx_fifofull))
339 return 0;
340
341 return 1;
342 }
343
344 return s3c24xx_serial_txempty_nofifo(port);
345}
346
347/* no modem control lines */
348static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
349{
350 unsigned int umstat = rd_regb(port, S3C2410_UMSTAT);
351
352 if (umstat & S3C2410_UMSTAT_CTS)
353 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
354 else
355 return TIOCM_CAR | TIOCM_DSR;
356}
357
358static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
359{
360 /* todo - possibly remove AFC and do manual CTS */
361}
362
363static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
364{
365 unsigned long flags;
366 unsigned int ucon;
367
368 spin_lock_irqsave(&port->lock, flags);
369
370 ucon = rd_regl(port, S3C2410_UCON);
371
372 if (break_state)
373 ucon |= S3C2410_UCON_SBREAK;
374 else
375 ucon &= ~S3C2410_UCON_SBREAK;
376
377 wr_regl(port, S3C2410_UCON, ucon);
378
379 spin_unlock_irqrestore(&port->lock, flags);
380}
381
382static void s3c24xx_serial_shutdown(struct uart_port *port)
383{
384 struct s3c24xx_uart_port *ourport = to_ourport(port);
385
386 if (ourport->tx_claimed) {
387 free_irq(TX_IRQ(port), ourport);
388 tx_enabled(port) = 0;
389 ourport->tx_claimed = 0;
390 }
391
392 if (ourport->rx_claimed) {
393 free_irq(RX_IRQ(port), ourport);
394 ourport->rx_claimed = 0;
395 rx_enabled(port) = 0;
396 }
397}
398
399
400static int s3c24xx_serial_startup(struct uart_port *port)
401{
402 struct s3c24xx_uart_port *ourport = to_ourport(port);
403 int ret;
404
405 dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
406 port->mapbase, port->membase);
407
408 rx_enabled(port) = 1;
409
410 ret = request_irq(RX_IRQ(port),
411 s3c24xx_serial_rx_chars, 0,
412 s3c24xx_serial_portname(port), ourport);
413
414 if (ret != 0) {
415 printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port));
416 return ret;
417 }
418
419 ourport->rx_claimed = 1;
420
421 dbg("requesting tx irq...\n");
422
423 tx_enabled(port) = 1;
424
425 ret = request_irq(TX_IRQ(port),
426 s3c24xx_serial_tx_chars, 0,
427 s3c24xx_serial_portname(port), ourport);
428
429 if (ret) {
430 printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port));
431 goto err;
432 }
433
434 ourport->tx_claimed = 1;
435
436 dbg("s3c24xx_serial_startup ok\n");
437
438 /* the port reset code should have done the correct
439 * register setup for the port controls */
440
441 return ret;
442
443 err:
444 s3c24xx_serial_shutdown(port);
445 return ret;
446}
447
448/* power power management control */
449
450static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
451 unsigned int old)
452{
453 struct s3c24xx_uart_port *ourport = to_ourport(port);
454
455 switch (level) {
456 case 3:
457 if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
458 clk_disable(ourport->baudclk);
459
460 clk_disable(ourport->clk);
461 break;
462
463 case 0:
464 clk_enable(ourport->clk);
465
466 if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
467 clk_enable(ourport->baudclk);
468
469 break;
470 default:
471 printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level);
472 }
473}
474
475/* baud rate calculation
476 *
477 * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
478 * of different sources, including the peripheral clock ("pclk") and an
479 * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
480 * with a programmable extra divisor.
481 *
482 * The following code goes through the clock sources, and calculates the
483 * baud clocks (and the resultant actual baud rates) and then tries to
484 * pick the closest one and select that.
485 *
486*/
487
488
489#define MAX_CLKS (8)
490
491static struct s3c24xx_uart_clksrc tmp_clksrc = {
492 .name = "pclk",
493 .min_baud = 0,
494 .max_baud = 0,
495 .divisor = 1,
496};
497
498static inline int
499s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
500{
501 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
502
503 return (info->get_clksrc)(port, c);
504}
505
506static inline int
507s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
508{
509 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
510
511 return (info->set_clksrc)(port, c);
512}
513
514struct baud_calc {
515 struct s3c24xx_uart_clksrc *clksrc;
516 unsigned int calc;
517 unsigned int quot;
518 struct clk *src;
519};
520
521static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
522 struct uart_port *port,
523 struct s3c24xx_uart_clksrc *clksrc,
524 unsigned int baud)
525{
526 unsigned long rate;
527
528 calc->src = clk_get(port->dev, clksrc->name);
529 if (calc->src == NULL || IS_ERR(calc->src))
530 return 0;
531
532 rate = clk_get_rate(calc->src);
533 rate /= clksrc->divisor;
534
535 calc->clksrc = clksrc;
536 calc->quot = (rate + (8 * baud)) / (16 * baud);
537 calc->calc = (rate / (calc->quot * 16));
538
539 calc->quot--;
540 return 1;
541}
542
543static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
544 struct s3c24xx_uart_clksrc **clksrc,
545 struct clk **clk,
546 unsigned int baud)
547{
548 struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
549 struct s3c24xx_uart_clksrc *clkp;
550 struct baud_calc res[MAX_CLKS];
551 struct baud_calc *resptr, *best, *sptr;
552 int i;
553
554 clkp = cfg->clocks;
555 best = NULL;
556
557 if (cfg->clocks_size < 2) {
558 if (cfg->clocks_size == 0)
559 clkp = &tmp_clksrc;
560
561 /* check to see if we're sourcing fclk, and if so we're
562 * going to have to update the clock source
563 */
564
565 if (strcmp(clkp->name, "fclk") == 0) {
566 struct s3c24xx_uart_clksrc src;
567
568 s3c24xx_serial_getsource(port, &src);
569
570 /* check that the port already using fclk, and if
571 * not, then re-select fclk
572 */
573
574 if (strcmp(src.name, clkp->name) == 0) {
575 s3c24xx_serial_setsource(port, clkp);
576 s3c24xx_serial_getsource(port, &src);
577 }
578
579 clkp->divisor = src.divisor;
580 }
581
582 s3c24xx_serial_calcbaud(res, port, clkp, baud);
583 best = res;
584 resptr = best + 1;
585 } else {
586 resptr = res;
587
588 for (i = 0; i < cfg->clocks_size; i++, clkp++) {
589 if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
590 resptr++;
591 }
592 }
593
594 /* ok, we now need to select the best clock we found */
595
596 if (!best) {
597 unsigned int deviation = (1<<30)|((1<<30)-1);
598 int calc_deviation;
599
600 for (sptr = res; sptr < resptr; sptr++) {
601 calc_deviation = baud - sptr->calc;
602 if (calc_deviation < 0)
603 calc_deviation = -calc_deviation;
604
605 if (calc_deviation < deviation) {
606 best = sptr;
607 deviation = calc_deviation;
608 }
609 }
610 }
611
612 /* store results to pass back */
613
614 *clksrc = best->clksrc;
615 *clk = best->src;
616
617 return best->quot;
618}
619
620static void s3c24xx_serial_set_termios(struct uart_port *port,
621 struct ktermios *termios,
622 struct ktermios *old)
623{
624 struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
625 struct s3c24xx_uart_port *ourport = to_ourport(port);
626 struct s3c24xx_uart_clksrc *clksrc = NULL;
627 struct clk *clk = NULL;
628 unsigned long flags;
629 unsigned int baud, quot;
630 unsigned int ulcon;
631 unsigned int umcon;
632
633 /*
634 * We don't support modem control lines.
635 */
636 termios->c_cflag &= ~(HUPCL | CMSPAR);
637 termios->c_cflag |= CLOCAL;
638
639 /*
640 * Ask the core to calculate the divisor for us.
641 */
642
643 baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
644
645 if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
646 quot = port->custom_divisor;
647 else
648 quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
649
650 /* check to see if we need to change clock source */
651
652 if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
653 s3c24xx_serial_setsource(port, clksrc);
654
655 if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
656 clk_disable(ourport->baudclk);
657 ourport->baudclk = NULL;
658 }
659
660 clk_enable(clk);
661
662 ourport->clksrc = clksrc;
663 ourport->baudclk = clk;
664 }
665
666 switch (termios->c_cflag & CSIZE) {
667 case CS5:
668 dbg("config: 5bits/char\n");
669 ulcon = S3C2410_LCON_CS5;
670 break;
671 case CS6:
672 dbg("config: 6bits/char\n");
673 ulcon = S3C2410_LCON_CS6;
674 break;
675 case CS7:
676 dbg("config: 7bits/char\n");
677 ulcon = S3C2410_LCON_CS7;
678 break;
679 case CS8:
680 default:
681 dbg("config: 8bits/char\n");
682 ulcon = S3C2410_LCON_CS8;
683 break;
684 }
685
686 /* preserve original lcon IR settings */
687 ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
688
689 if (termios->c_cflag & CSTOPB)
690 ulcon |= S3C2410_LCON_STOPB;
691
692 umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
693
694 if (termios->c_cflag & PARENB) {
695 if (termios->c_cflag & PARODD)
696 ulcon |= S3C2410_LCON_PODD;
697 else
698 ulcon |= S3C2410_LCON_PEVEN;
699 } else {
700 ulcon |= S3C2410_LCON_PNONE;
701 }
702
703 spin_lock_irqsave(&port->lock, flags);
704
705 dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
706
707 wr_regl(port, S3C2410_ULCON, ulcon);
708 wr_regl(port, S3C2410_UBRDIV, quot);
709 wr_regl(port, S3C2410_UMCON, umcon);
710
711 dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
712 rd_regl(port, S3C2410_ULCON),
713 rd_regl(port, S3C2410_UCON),
714 rd_regl(port, S3C2410_UFCON));
715
716 /*
717 * Update the per-port timeout.
718 */
719 uart_update_timeout(port, termios->c_cflag, baud);
720
721 /*
722 * Which character status flags are we interested in?
723 */
724 port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
725 if (termios->c_iflag & INPCK)
726 port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY;
727
728 /*
729 * Which character status flags should we ignore?
730 */
731 port->ignore_status_mask = 0;
732 if (termios->c_iflag & IGNPAR)
733 port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
734 if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
735 port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
736
737 /*
738 * Ignore all characters if CREAD is not set.
739 */
740 if ((termios->c_cflag & CREAD) == 0)
741 port->ignore_status_mask |= RXSTAT_DUMMY_READ;
742
743 spin_unlock_irqrestore(&port->lock, flags);
744}
745
746static const char *s3c24xx_serial_type(struct uart_port *port)
747{
748 switch (port->type) {
749 case PORT_S3C2410:
750 return "S3C2410";
751 case PORT_S3C2440:
752 return "S3C2440";
753 case PORT_S3C2412:
754 return "S3C2412";
755 default:
756 return NULL;
757 }
758}
759
760#define MAP_SIZE (0x100)
761
762static void s3c24xx_serial_release_port(struct uart_port *port)
763{
764 release_mem_region(port->mapbase, MAP_SIZE);
765}
766
767static int s3c24xx_serial_request_port(struct uart_port *port)
768{
769 const char *name = s3c24xx_serial_portname(port);
770 return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY;
771}
772
773static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
774{
775 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
776
777 if (flags & UART_CONFIG_TYPE &&
778 s3c24xx_serial_request_port(port) == 0)
779 port->type = info->type;
780}
781
782/*
783 * verify the new serial_struct (for TIOCSSERIAL).
784 */
785static int
786s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
787{
788 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
789
790 if (ser->type != PORT_UNKNOWN && ser->type != info->type)
791 return -EINVAL;
792
793 return 0;
794}
795
796
797#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
798
799static struct console s3c24xx_serial_console;
800
801#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
802#else
803#define S3C24XX_SERIAL_CONSOLE NULL
804#endif
805
806static struct uart_ops s3c24xx_serial_ops = {
807 .pm = s3c24xx_serial_pm,
808 .tx_empty = s3c24xx_serial_tx_empty,
809 .get_mctrl = s3c24xx_serial_get_mctrl,
810 .set_mctrl = s3c24xx_serial_set_mctrl,
811 .stop_tx = s3c24xx_serial_stop_tx,
812 .start_tx = s3c24xx_serial_start_tx,
813 .stop_rx = s3c24xx_serial_stop_rx,
814 .enable_ms = s3c24xx_serial_enable_ms,
815 .break_ctl = s3c24xx_serial_break_ctl,
816 .startup = s3c24xx_serial_startup,
817 .shutdown = s3c24xx_serial_shutdown,
818 .set_termios = s3c24xx_serial_set_termios,
819 .type = s3c24xx_serial_type,
820 .release_port = s3c24xx_serial_release_port,
821 .request_port = s3c24xx_serial_request_port,
822 .config_port = s3c24xx_serial_config_port,
823 .verify_port = s3c24xx_serial_verify_port,
824};
825
826
827static struct uart_driver s3c24xx_uart_drv = {
828 .owner = THIS_MODULE,
829 .dev_name = "s3c2410_serial",
830 .nr = 3,
831 .cons = S3C24XX_SERIAL_CONSOLE,
832 .driver_name = S3C24XX_SERIAL_NAME,
833 .major = S3C24XX_SERIAL_MAJOR,
834 .minor = S3C24XX_SERIAL_MINOR,
835};
836
837static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
838 [0] = {
839 .port = {
840 .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
841 .iotype = UPIO_MEM,
842 .irq = IRQ_S3CUART_RX0,
843 .uartclk = 0,
844 .fifosize = 16,
845 .ops = &s3c24xx_serial_ops,
846 .flags = UPF_BOOT_AUTOCONF,
847 .line = 0,
848 }
849 },
850 [1] = {
851 .port = {
852 .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock),
853 .iotype = UPIO_MEM,
854 .irq = IRQ_S3CUART_RX1,
855 .uartclk = 0,
856 .fifosize = 16,
857 .ops = &s3c24xx_serial_ops,
858 .flags = UPF_BOOT_AUTOCONF,
859 .line = 1,
860 }
861 },
862#if NR_PORTS > 2
863
864 [2] = {
865 .port = {
866 .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock),
867 .iotype = UPIO_MEM,
868 .irq = IRQ_S3CUART_RX2,
869 .uartclk = 0,
870 .fifosize = 16,
871 .ops = &s3c24xx_serial_ops,
872 .flags = UPF_BOOT_AUTOCONF,
873 .line = 2,
874 }
875 }
876#endif
877};
878
879/* s3c24xx_serial_resetport
880 *
881 * wrapper to call the specific reset for this port (reset the fifos
882 * and the settings)
883*/
884
885static inline int s3c24xx_serial_resetport(struct uart_port *port,
886 struct s3c2410_uartcfg *cfg)
887{
888 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
889
890 return (info->reset_port)(port, cfg);
891}
892
893/* s3c24xx_serial_init_port
894 *
895 * initialise a single serial port from the platform device given
896 */
897
898static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
899 struct s3c24xx_uart_info *info,
900 struct platform_device *platdev)
901{
902 struct uart_port *port = &ourport->port;
903 struct s3c2410_uartcfg *cfg;
904 struct resource *res;
905 int ret;
906
907 dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
908
909 if (platdev == NULL)
910 return -ENODEV;
911
912 cfg = s3c24xx_dev_to_cfg(&platdev->dev);
913
914 if (port->mapbase != 0)
915 return 0;
916
917 if (cfg->hwport > 3)
918 return -EINVAL;
919
920 /* setup info for port */
921 port->dev = &platdev->dev;
922 ourport->info = info;
923
924 /* copy the info in from provided structure */
925 ourport->port.fifosize = info->fifosize;
926
927 dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
928
929 port->uartclk = 1;
930
931 if (cfg->uart_flags & UPF_CONS_FLOW) {
932 dbg("s3c24xx_serial_init_port: enabling flow control\n");
933 port->flags |= UPF_CONS_FLOW;
934 }
935
936 /* sort our the physical and virtual addresses for each UART */
937
938 res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
939 if (res == NULL) {
940 printk(KERN_ERR "failed to find memory resource for uart\n");
941 return -EINVAL;
942 }
943
944 dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
945
946 port->mapbase = res->start;
947 port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
948 ret = platform_get_irq(platdev, 0);
949 if (ret < 0)
950 port->irq = 0;
951 else
952 port->irq = ret;
953
954 ourport->clk = clk_get(&platdev->dev, "uart");
955
956 dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
957 port->mapbase, port->membase, port->irq, port->uartclk);
958
959 /* reset the fifos (and setup the uart) */
960 s3c24xx_serial_resetport(port, cfg);
961 return 0;
962}
963
964static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
965 struct device_attribute *attr,
966 char *buf)
967{
968 struct uart_port *port = s3c24xx_dev_to_port(dev);
969 struct s3c24xx_uart_port *ourport = to_ourport(port);
970
971 return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name);
972}
973
974static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
975
976/* Device driver serial port probe */
977
978static int probe_index;
979
980int s3c24xx_serial_probe(struct platform_device *dev,
981 struct s3c24xx_uart_info *info)
982{
983 struct s3c24xx_uart_port *ourport;
984 int ret;
985
986 dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
987
988 ourport = &s3c24xx_serial_ports[probe_index];
989 probe_index++;
990
991 dbg("%s: initialising port %p...\n", __func__, ourport);
992
993 ret = s3c24xx_serial_init_port(ourport, info, dev);
994 if (ret < 0)
995 goto probe_err;
996
997 dbg("%s: adding port\n", __func__);
998 uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
999 platform_set_drvdata(dev, &ourport->port);
1000
1001 ret = device_create_file(&dev->dev, &dev_attr_clock_source);
1002 if (ret < 0)
1003 printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
1004
1005 return 0;
1006
1007 probe_err:
1008 return ret;
1009}
1010
1011EXPORT_SYMBOL_GPL(s3c24xx_serial_probe);
1012
1013int s3c24xx_serial_remove(struct platform_device *dev)
1014{
1015 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
1016
1017 if (port) {
1018 device_remove_file(&dev->dev, &dev_attr_clock_source);
1019 uart_remove_one_port(&s3c24xx_uart_drv, port);
1020 }
1021
1022 return 0;
1023}
1024
1025EXPORT_SYMBOL_GPL(s3c24xx_serial_remove);
1026
1027/* UART power management code */
1028
1029#ifdef CONFIG_PM
1030
1031static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state)
1032{
1033 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
1034
1035 if (port)
1036 uart_suspend_port(&s3c24xx_uart_drv, port);
1037
1038 return 0;
1039}
1040
1041static int s3c24xx_serial_resume(struct platform_device *dev)
1042{
1043 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
1044 struct s3c24xx_uart_port *ourport = to_ourport(port);
1045
1046 if (port) {
1047 clk_enable(ourport->clk);
1048 s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
1049 clk_disable(ourport->clk);
1050
1051 uart_resume_port(&s3c24xx_uart_drv, port);
1052 }
1053
1054 return 0;
1055}
1056#endif
1057
1058int s3c24xx_serial_init(struct platform_driver *drv,
1059 struct s3c24xx_uart_info *info)
1060{
1061 dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
1062
1063#ifdef CONFIG_PM
1064 drv->suspend = s3c24xx_serial_suspend;
1065 drv->resume = s3c24xx_serial_resume;
1066#endif
1067
1068 return platform_driver_register(drv);
1069}
1070
1071EXPORT_SYMBOL_GPL(s3c24xx_serial_init);
1072
1073/* module initialisation code */
1074
1075static int __init s3c24xx_serial_modinit(void)
1076{
1077 int ret;
1078
1079 ret = uart_register_driver(&s3c24xx_uart_drv);
1080 if (ret < 0) {
1081 printk(KERN_ERR "failed to register UART driver\n");
1082 return -1;
1083 }
1084
1085 return 0;
1086}
1087
1088static void __exit s3c24xx_serial_modexit(void)
1089{
1090 uart_unregister_driver(&s3c24xx_uart_drv);
1091}
1092
1093module_init(s3c24xx_serial_modinit);
1094module_exit(s3c24xx_serial_modexit);
1095
1096/* Console code */
1097
1098#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
1099
1100static struct uart_port *cons_uart;
1101
1102static int
1103s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
1104{
1105 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1106 unsigned long ufstat, utrstat;
1107
1108 if (ufcon & S3C2410_UFCON_FIFOMODE) {
1109 /* fifo mode - check ammount of data in fifo registers... */
1110
1111 ufstat = rd_regl(port, S3C2410_UFSTAT);
1112 return (ufstat & info->tx_fifofull) ? 0 : 1;
1113 }
1114
1115 /* in non-fifo mode, we go and use the tx buffer empty */
1116
1117 utrstat = rd_regl(port, S3C2410_UTRSTAT);
1118 return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
1119}
1120
1121static void
1122s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
1123{
1124 unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
1125 while (!s3c24xx_serial_console_txrdy(port, ufcon))
1126 barrier();
1127 wr_regb(cons_uart, S3C2410_UTXH, ch);
1128}
1129
1130static void
1131s3c24xx_serial_console_write(struct console *co, const char *s,
1132 unsigned int count)
1133{
1134 uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
1135}
1136
1137static void __init
1138s3c24xx_serial_get_options(struct uart_port *port, int *baud,
1139 int *parity, int *bits)
1140{
1141 struct s3c24xx_uart_clksrc clksrc;
1142 struct clk *clk;
1143 unsigned int ulcon;
1144 unsigned int ucon;
1145 unsigned int ubrdiv;
1146 unsigned long rate;
1147
1148 ulcon = rd_regl(port, S3C2410_ULCON);
1149 ucon = rd_regl(port, S3C2410_UCON);
1150 ubrdiv = rd_regl(port, S3C2410_UBRDIV);
1151
1152 dbg("s3c24xx_serial_get_options: port=%p\n"
1153 "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
1154 port, ulcon, ucon, ubrdiv);
1155
1156 if ((ucon & 0xf) != 0) {
1157 /* consider the serial port configured if the tx/rx mode set */
1158
1159 switch (ulcon & S3C2410_LCON_CSMASK) {
1160 case S3C2410_LCON_CS5:
1161 *bits = 5;
1162 break;
1163 case S3C2410_LCON_CS6:
1164 *bits = 6;
1165 break;
1166 case S3C2410_LCON_CS7:
1167 *bits = 7;
1168 break;
1169 default:
1170 case S3C2410_LCON_CS8:
1171 *bits = 8;
1172 break;
1173 }
1174
1175 switch (ulcon & S3C2410_LCON_PMASK) {
1176 case S3C2410_LCON_PEVEN:
1177 *parity = 'e';
1178 break;
1179
1180 case S3C2410_LCON_PODD:
1181 *parity = 'o';
1182 break;
1183
1184 case S3C2410_LCON_PNONE:
1185 default:
1186 *parity = 'n';
1187 }
1188
1189 /* now calculate the baud rate */
1190
1191 s3c24xx_serial_getsource(port, &clksrc);
1192
1193 clk = clk_get(port->dev, clksrc.name);
1194 if (!IS_ERR(clk) && clk != NULL)
1195 rate = clk_get_rate(clk) / clksrc.divisor;
1196 else
1197 rate = 1;
1198
1199
1200 *baud = rate / (16 * (ubrdiv + 1));
1201 dbg("calculated baud %d\n", *baud);
1202 }
1203
1204}
1205
1206/* s3c24xx_serial_init_ports
1207 *
1208 * initialise the serial ports from the machine provided initialisation
1209 * data.
1210*/
1211
1212static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
1213{
1214 struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
1215 struct platform_device **platdev_ptr;
1216 int i;
1217
1218 dbg("s3c24xx_serial_init_ports: initialising ports...\n");
1219
1220 platdev_ptr = s3c24xx_uart_devs;
1221
1222 for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) {
1223 s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
1224 }
1225
1226 return 0;
1227}
1228
1229static int __init
1230s3c24xx_serial_console_setup(struct console *co, char *options)
1231{
1232 struct uart_port *port;
1233 int baud = 9600;
1234 int bits = 8;
1235 int parity = 'n';
1236 int flow = 'n';
1237
1238 dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n",
1239 co, co->index, options);
1240
1241 /* is this a valid port */
1242
1243 if (co->index == -1 || co->index >= NR_PORTS)
1244 co->index = 0;
1245
1246 port = &s3c24xx_serial_ports[co->index].port;
1247
1248 /* is the port configured? */
1249
1250 if (port->mapbase == 0x0) {
1251 co->index = 0;
1252 port = &s3c24xx_serial_ports[co->index].port;
1253 }
1254
1255 cons_uart = port;
1256
1257 dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index);
1258
1259 /*
1260 * Check whether an invalid uart number has been specified, and
1261 * if so, search for the first available port that does have
1262 * console support.
1263 */
1264 if (options)
1265 uart_parse_options(options, &baud, &parity, &bits, &flow);
1266 else
1267 s3c24xx_serial_get_options(port, &baud, &parity, &bits);
1268
1269 dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
1270
1271 return uart_set_options(port, co, baud, parity, bits, flow);
1272}
1273
1274/* s3c24xx_serial_initconsole
1275 *
1276 * initialise the console from one of the uart drivers
1277*/
1278
1279static struct console s3c24xx_serial_console = {
1280 .name = S3C24XX_SERIAL_NAME,
1281 .device = uart_console_device,
1282 .flags = CON_PRINTBUFFER,
1283 .index = -1,
1284 .write = s3c24xx_serial_console_write,
1285 .setup = s3c24xx_serial_console_setup
1286};
1287
1288int s3c24xx_serial_initconsole(struct platform_driver *drv,
1289 struct s3c24xx_uart_info *info)
1290
1291{
1292 struct platform_device *dev = s3c24xx_uart_devs[0];
1293
1294 dbg("s3c24xx_serial_initconsole\n");
1295
1296 /* select driver based on the cpu */
1297
1298 if (dev == NULL) {
1299 printk(KERN_ERR "s3c24xx: no devices for console init\n");
1300 return 0;
1301 }
1302
1303 if (strcmp(dev->name, drv->driver.name) != 0)
1304 return 0;
1305
1306 s3c24xx_serial_console.data = &s3c24xx_uart_drv;
1307 s3c24xx_serial_init_ports(info);
1308
1309 register_console(&s3c24xx_serial_console);
1310 return 0;
1311}
1312
1313#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
1314
1315MODULE_DESCRIPTION("Samsung SoC Serial port driver");
1316MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
1317MODULE_LICENSE("GPL v2");