Benjamin Herrenschmidt | 184cd4a | 2011-11-15 17:29:08 +0000 | [diff] [blame] | 1 | /* |
| 2 | * Support PCI/PCIe on PowerNV platforms |
| 3 | * |
| 4 | * Copyright 2011 Benjamin Herrenschmidt, IBM Corp. |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or |
| 7 | * modify it under the terms of the GNU General Public License |
| 8 | * as published by the Free Software Foundation; either version |
| 9 | * 2 of the License, or (at your option) any later version. |
| 10 | */ |
| 11 | |
| 12 | #define DEBUG |
| 13 | |
| 14 | #include <linux/kernel.h> |
| 15 | #include <linux/pci.h> |
| 16 | #include <linux/delay.h> |
| 17 | #include <linux/string.h> |
| 18 | #include <linux/init.h> |
| 19 | #include <linux/bootmem.h> |
| 20 | #include <linux/irq.h> |
| 21 | #include <linux/io.h> |
| 22 | #include <linux/msi.h> |
| 23 | |
| 24 | #include <asm/sections.h> |
| 25 | #include <asm/io.h> |
| 26 | #include <asm/prom.h> |
| 27 | #include <asm/pci-bridge.h> |
| 28 | #include <asm/machdep.h> |
| 29 | #include <asm/ppc-pci.h> |
| 30 | #include <asm/opal.h> |
| 31 | #include <asm/iommu.h> |
| 32 | #include <asm/tce.h> |
| 33 | #include <asm/abs_addr.h> |
| 34 | |
| 35 | #include "powernv.h" |
| 36 | #include "pci.h" |
| 37 | |
| 38 | struct resource_wrap { |
| 39 | struct list_head link; |
| 40 | resource_size_t size; |
| 41 | resource_size_t align; |
| 42 | struct pci_dev *dev; /* Set if it's a device */ |
| 43 | struct pci_bus *bus; /* Set if it's a bridge */ |
| 44 | }; |
| 45 | |
| 46 | static int __pe_printk(const char *level, const struct pnv_ioda_pe *pe, |
| 47 | struct va_format *vaf) |
| 48 | { |
| 49 | char pfix[32]; |
| 50 | |
| 51 | if (pe->pdev) |
| 52 | strlcpy(pfix, dev_name(&pe->pdev->dev), sizeof(pfix)); |
| 53 | else |
| 54 | sprintf(pfix, "%04x:%02x ", |
| 55 | pci_domain_nr(pe->pbus), pe->pbus->number); |
| 56 | return printk("pci %s%s: [PE# %.3d] %pV", level, pfix, pe->pe_number, vaf); |
| 57 | } |
| 58 | |
| 59 | #define define_pe_printk_level(func, kern_level) \ |
| 60 | static int func(const struct pnv_ioda_pe *pe, const char *fmt, ...) \ |
| 61 | { \ |
| 62 | struct va_format vaf; \ |
| 63 | va_list args; \ |
| 64 | int r; \ |
| 65 | \ |
| 66 | va_start(args, fmt); \ |
| 67 | \ |
| 68 | vaf.fmt = fmt; \ |
| 69 | vaf.va = &args; \ |
| 70 | \ |
| 71 | r = __pe_printk(kern_level, pe, &vaf); \ |
| 72 | va_end(args); \ |
| 73 | \ |
| 74 | return r; \ |
| 75 | } \ |
| 76 | |
| 77 | define_pe_printk_level(pe_err, KERN_ERR); |
| 78 | define_pe_printk_level(pe_warn, KERN_WARNING); |
| 79 | define_pe_printk_level(pe_info, KERN_INFO); |
| 80 | |
| 81 | |
| 82 | /* Calculate resource usage & alignment requirement of a single |
| 83 | * device. This will also assign all resources within the device |
| 84 | * for a given type starting at 0 for the biggest one and then |
| 85 | * assigning in decreasing order of size. |
| 86 | */ |
| 87 | static void __devinit pnv_ioda_calc_dev(struct pci_dev *dev, unsigned int flags, |
| 88 | resource_size_t *size, |
| 89 | resource_size_t *align) |
| 90 | { |
| 91 | resource_size_t start; |
| 92 | struct resource *r; |
| 93 | int i; |
| 94 | |
| 95 | pr_devel(" -> CDR %s\n", pci_name(dev)); |
| 96 | |
| 97 | *size = *align = 0; |
| 98 | |
| 99 | /* Clear the resources out and mark them all unset */ |
| 100 | for (i = 0; i <= PCI_ROM_RESOURCE; i++) { |
| 101 | r = &dev->resource[i]; |
| 102 | if (!(r->flags & flags)) |
| 103 | continue; |
| 104 | if (r->start) { |
| 105 | r->end -= r->start; |
| 106 | r->start = 0; |
| 107 | } |
| 108 | r->flags |= IORESOURCE_UNSET; |
| 109 | } |
| 110 | |
| 111 | /* We currently keep all memory resources together, we |
| 112 | * will handle prefetch & 64-bit separately in the future |
| 113 | * but for now we stick everybody in M32 |
| 114 | */ |
| 115 | start = 0; |
| 116 | for (;;) { |
| 117 | resource_size_t max_size = 0; |
| 118 | int max_no = -1; |
| 119 | |
| 120 | /* Find next biggest resource */ |
| 121 | for (i = 0; i <= PCI_ROM_RESOURCE; i++) { |
| 122 | r = &dev->resource[i]; |
| 123 | if (!(r->flags & IORESOURCE_UNSET) || |
| 124 | !(r->flags & flags)) |
| 125 | continue; |
| 126 | if (resource_size(r) > max_size) { |
| 127 | max_size = resource_size(r); |
| 128 | max_no = i; |
| 129 | } |
| 130 | } |
| 131 | if (max_no < 0) |
| 132 | break; |
| 133 | r = &dev->resource[max_no]; |
| 134 | if (max_size > *align) |
| 135 | *align = max_size; |
| 136 | *size += max_size; |
| 137 | r->start = start; |
| 138 | start += max_size; |
| 139 | r->end = r->start + max_size - 1; |
| 140 | r->flags &= ~IORESOURCE_UNSET; |
| 141 | pr_devel(" -> R%d %016llx..%016llx\n", |
| 142 | max_no, r->start, r->end); |
| 143 | } |
| 144 | pr_devel(" <- CDR %s size=%llx align=%llx\n", |
| 145 | pci_name(dev), *size, *align); |
| 146 | } |
| 147 | |
| 148 | /* Allocate a resource "wrap" for a given device or bridge and |
| 149 | * insert it at the right position in the sorted list |
| 150 | */ |
| 151 | static void __devinit pnv_ioda_add_wrap(struct list_head *list, |
| 152 | struct pci_bus *bus, |
| 153 | struct pci_dev *dev, |
| 154 | resource_size_t size, |
| 155 | resource_size_t align) |
| 156 | { |
| 157 | struct resource_wrap *w1, *w = kzalloc(sizeof(*w), GFP_KERNEL); |
| 158 | |
| 159 | w->size = size; |
| 160 | w->align = align; |
| 161 | w->dev = dev; |
| 162 | w->bus = bus; |
| 163 | |
| 164 | list_for_each_entry(w1, list, link) { |
| 165 | if (w1->align < align) { |
| 166 | list_add_tail(&w->link, &w1->link); |
| 167 | return; |
| 168 | } |
| 169 | } |
| 170 | list_add_tail(&w->link, list); |
| 171 | } |
| 172 | |
| 173 | /* Offset device resources of a given type */ |
| 174 | static void __devinit pnv_ioda_offset_dev(struct pci_dev *dev, |
| 175 | unsigned int flags, |
| 176 | resource_size_t offset) |
| 177 | { |
| 178 | struct resource *r; |
| 179 | int i; |
| 180 | |
| 181 | pr_devel(" -> ODR %s [%x] +%016llx\n", pci_name(dev), flags, offset); |
| 182 | |
| 183 | for (i = 0; i <= PCI_ROM_RESOURCE; i++) { |
| 184 | r = &dev->resource[i]; |
| 185 | if (r->flags & flags) { |
| 186 | dev->resource[i].start += offset; |
| 187 | dev->resource[i].end += offset; |
| 188 | } |
| 189 | } |
| 190 | |
| 191 | pr_devel(" <- ODR %s [%x] +%016llx\n", pci_name(dev), flags, offset); |
| 192 | } |
| 193 | |
| 194 | /* Offset bus resources (& all children) of a given type */ |
| 195 | static void __devinit pnv_ioda_offset_bus(struct pci_bus *bus, |
| 196 | unsigned int flags, |
| 197 | resource_size_t offset) |
| 198 | { |
| 199 | struct resource *r; |
| 200 | struct pci_dev *dev; |
| 201 | struct pci_bus *cbus; |
| 202 | int i; |
| 203 | |
| 204 | pr_devel(" -> OBR %s [%x] +%016llx\n", |
| 205 | bus->self ? pci_name(bus->self) : "root", flags, offset); |
| 206 | |
| 207 | for (i = 0; i < 2; i++) { |
| 208 | r = bus->resource[i]; |
| 209 | if (r && (r->flags & flags)) { |
| 210 | bus->resource[i]->start += offset; |
| 211 | bus->resource[i]->end += offset; |
| 212 | } |
| 213 | } |
| 214 | list_for_each_entry(dev, &bus->devices, bus_list) |
| 215 | pnv_ioda_offset_dev(dev, flags, offset); |
| 216 | list_for_each_entry(cbus, &bus->children, node) |
| 217 | pnv_ioda_offset_bus(cbus, flags, offset); |
| 218 | |
| 219 | pr_devel(" <- OBR %s [%x]\n", |
| 220 | bus->self ? pci_name(bus->self) : "root", flags); |
| 221 | } |
| 222 | |
| 223 | /* This is the guts of our IODA resource allocation. This is called |
| 224 | * recursively for each bus in the system. It calculates all the |
| 225 | * necessary size and requirements for children and assign them |
| 226 | * resources such that: |
| 227 | * |
| 228 | * - Each function fits in it's own contiguous set of IO/M32 |
| 229 | * segment |
| 230 | * |
| 231 | * - All segments behind a P2P bridge are contiguous and obey |
| 232 | * alignment constraints of those bridges |
| 233 | */ |
| 234 | static void __devinit pnv_ioda_calc_bus(struct pci_bus *bus, unsigned int flags, |
| 235 | resource_size_t *size, |
| 236 | resource_size_t *align) |
| 237 | { |
| 238 | struct pci_controller *hose = pci_bus_to_host(bus); |
| 239 | struct pnv_phb *phb = hose->private_data; |
| 240 | resource_size_t dev_size, dev_align, start; |
| 241 | resource_size_t min_align, min_balign; |
| 242 | struct pci_dev *cdev; |
| 243 | struct pci_bus *cbus; |
| 244 | struct list_head head; |
| 245 | struct resource_wrap *w; |
| 246 | unsigned int bres; |
| 247 | |
| 248 | *size = *align = 0; |
| 249 | |
| 250 | pr_devel("-> CBR %s [%x]\n", |
| 251 | bus->self ? pci_name(bus->self) : "root", flags); |
| 252 | |
| 253 | /* Calculate alignment requirements based on the type |
| 254 | * of resource we are working on |
| 255 | */ |
| 256 | if (flags & IORESOURCE_IO) { |
| 257 | bres = 0; |
| 258 | min_align = phb->ioda.io_segsize; |
| 259 | min_balign = 0x1000; |
| 260 | } else { |
| 261 | bres = 1; |
| 262 | min_align = phb->ioda.m32_segsize; |
| 263 | min_balign = 0x100000; |
| 264 | } |
| 265 | |
| 266 | /* Gather all our children resources ordered by alignment */ |
| 267 | INIT_LIST_HEAD(&head); |
| 268 | |
| 269 | /* - Busses */ |
| 270 | list_for_each_entry(cbus, &bus->children, node) { |
| 271 | pnv_ioda_calc_bus(cbus, flags, &dev_size, &dev_align); |
| 272 | pnv_ioda_add_wrap(&head, cbus, NULL, dev_size, dev_align); |
| 273 | } |
| 274 | |
| 275 | /* - Devices */ |
| 276 | list_for_each_entry(cdev, &bus->devices, bus_list) { |
| 277 | pnv_ioda_calc_dev(cdev, flags, &dev_size, &dev_align); |
| 278 | /* Align them to segment size */ |
| 279 | if (dev_align < min_align) |
| 280 | dev_align = min_align; |
| 281 | pnv_ioda_add_wrap(&head, NULL, cdev, dev_size, dev_align); |
| 282 | } |
| 283 | if (list_empty(&head)) |
| 284 | goto empty; |
| 285 | |
| 286 | /* Now we can do two things: assign offsets to them within that |
| 287 | * level and get our total alignment & size requirements. The |
| 288 | * assignment algorithm is going to be uber-trivial for now, we |
| 289 | * can try to be smarter later at filling out holes. |
| 290 | */ |
| 291 | start = bus->self ? 0 : bus->resource[bres]->start; |
| 292 | |
| 293 | /* Don't hand out IO 0 */ |
| 294 | if ((flags & IORESOURCE_IO) && !bus->self) |
| 295 | start += 0x1000; |
| 296 | |
| 297 | while(!list_empty(&head)) { |
| 298 | w = list_first_entry(&head, struct resource_wrap, link); |
| 299 | list_del(&w->link); |
| 300 | if (w->size) { |
| 301 | if (start) { |
| 302 | start = ALIGN(start, w->align); |
| 303 | if (w->dev) |
| 304 | pnv_ioda_offset_dev(w->dev,flags,start); |
| 305 | else if (w->bus) |
| 306 | pnv_ioda_offset_bus(w->bus,flags,start); |
| 307 | } |
| 308 | if (w->align > *align) |
| 309 | *align = w->align; |
| 310 | } |
| 311 | start += w->size; |
| 312 | kfree(w); |
| 313 | } |
| 314 | *size = start; |
| 315 | |
| 316 | /* Align and setup bridge resources */ |
| 317 | *align = max_t(resource_size_t, *align, |
| 318 | max_t(resource_size_t, min_align, min_balign)); |
| 319 | *size = ALIGN(*size, |
| 320 | max_t(resource_size_t, min_align, min_balign)); |
| 321 | empty: |
| 322 | /* Only setup P2P's, not the PHB itself */ |
| 323 | if (bus->self) { |
| 324 | WARN_ON(bus->resource[bres] == NULL); |
| 325 | bus->resource[bres]->start = 0; |
| 326 | bus->resource[bres]->flags = (*size) ? flags : 0; |
| 327 | bus->resource[bres]->end = (*size) ? (*size - 1) : 0; |
| 328 | |
| 329 | /* Clear prefetch bus resources for now */ |
| 330 | bus->resource[2]->flags = 0; |
| 331 | } |
| 332 | |
| 333 | pr_devel("<- CBR %s [%x] *size=%016llx *align=%016llx\n", |
| 334 | bus->self ? pci_name(bus->self) : "root", flags,*size,*align); |
| 335 | } |
| 336 | |
| 337 | static struct pci_dn *pnv_ioda_get_pdn(struct pci_dev *dev) |
| 338 | { |
| 339 | struct device_node *np; |
| 340 | |
| 341 | np = pci_device_to_OF_node(dev); |
| 342 | if (!np) |
| 343 | return NULL; |
| 344 | return PCI_DN(np); |
| 345 | } |
| 346 | |
| 347 | static void __devinit pnv_ioda_setup_pe_segments(struct pci_dev *dev) |
| 348 | { |
| 349 | struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| 350 | struct pnv_phb *phb = hose->private_data; |
| 351 | struct pci_dn *pdn = pnv_ioda_get_pdn(dev); |
| 352 | unsigned int pe, i; |
| 353 | resource_size_t pos; |
| 354 | struct resource io_res; |
| 355 | struct resource m32_res; |
| 356 | struct pci_bus_region region; |
| 357 | int rc; |
| 358 | |
| 359 | /* Anything not referenced in the device-tree gets PE#0 */ |
| 360 | pe = pdn ? pdn->pe_number : 0; |
| 361 | |
| 362 | /* Calculate the device min/max */ |
| 363 | io_res.start = m32_res.start = (resource_size_t)-1; |
| 364 | io_res.end = m32_res.end = 0; |
| 365 | io_res.flags = IORESOURCE_IO; |
| 366 | m32_res.flags = IORESOURCE_MEM; |
| 367 | |
| 368 | for (i = 0; i <= PCI_ROM_RESOURCE; i++) { |
| 369 | struct resource *r = NULL; |
| 370 | if (dev->resource[i].flags & IORESOURCE_IO) |
| 371 | r = &io_res; |
| 372 | if (dev->resource[i].flags & IORESOURCE_MEM) |
| 373 | r = &m32_res; |
| 374 | if (!r) |
| 375 | continue; |
| 376 | if (dev->resource[i].start < r->start) |
| 377 | r->start = dev->resource[i].start; |
| 378 | if (dev->resource[i].end > r->end) |
| 379 | r->end = dev->resource[i].end; |
| 380 | } |
| 381 | |
| 382 | /* Setup IO segments */ |
| 383 | if (io_res.start < io_res.end) { |
| 384 | pcibios_resource_to_bus(dev, ®ion, &io_res); |
| 385 | pos = region.start; |
| 386 | i = pos / phb->ioda.io_segsize; |
| 387 | while(i < phb->ioda.total_pe && pos <= region.end) { |
| 388 | if (phb->ioda.io_segmap[i]) { |
| 389 | pr_err("%s: Trying to use IO seg #%d which is" |
| 390 | " already used by PE# %d\n", |
| 391 | pci_name(dev), i, |
| 392 | phb->ioda.io_segmap[i]); |
| 393 | /* XXX DO SOMETHING TO DISABLE DEVICE ? */ |
| 394 | break; |
| 395 | } |
| 396 | phb->ioda.io_segmap[i] = pe; |
| 397 | rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe, |
| 398 | OPAL_IO_WINDOW_TYPE, |
| 399 | 0, i); |
| 400 | if (rc != OPAL_SUCCESS) { |
| 401 | pr_err("%s: OPAL error %d setting up mapping" |
| 402 | " for IO seg# %d\n", |
| 403 | pci_name(dev), rc, i); |
| 404 | /* XXX DO SOMETHING TO DISABLE DEVICE ? */ |
| 405 | break; |
| 406 | } |
| 407 | pos += phb->ioda.io_segsize; |
| 408 | i++; |
| 409 | }; |
| 410 | } |
| 411 | |
| 412 | /* Setup M32 segments */ |
| 413 | if (m32_res.start < m32_res.end) { |
| 414 | pcibios_resource_to_bus(dev, ®ion, &m32_res); |
| 415 | pos = region.start; |
| 416 | i = pos / phb->ioda.m32_segsize; |
| 417 | while(i < phb->ioda.total_pe && pos <= region.end) { |
| 418 | if (phb->ioda.m32_segmap[i]) { |
| 419 | pr_err("%s: Trying to use M32 seg #%d which is" |
| 420 | " already used by PE# %d\n", |
| 421 | pci_name(dev), i, |
| 422 | phb->ioda.m32_segmap[i]); |
| 423 | /* XXX DO SOMETHING TO DISABLE DEVICE ? */ |
| 424 | break; |
| 425 | } |
| 426 | phb->ioda.m32_segmap[i] = pe; |
| 427 | rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe, |
| 428 | OPAL_M32_WINDOW_TYPE, |
| 429 | 0, i); |
| 430 | if (rc != OPAL_SUCCESS) { |
| 431 | pr_err("%s: OPAL error %d setting up mapping" |
| 432 | " for M32 seg# %d\n", |
| 433 | pci_name(dev), rc, i); |
| 434 | /* XXX DO SOMETHING TO DISABLE DEVICE ? */ |
| 435 | break; |
| 436 | } |
| 437 | pos += phb->ioda.m32_segsize; |
| 438 | i++; |
| 439 | } |
| 440 | } |
| 441 | } |
| 442 | |
| 443 | /* Check if a resource still fits in the total IO or M32 range |
| 444 | * for a given PHB |
| 445 | */ |
| 446 | static int __devinit pnv_ioda_resource_fit(struct pci_controller *hose, |
| 447 | struct resource *r) |
| 448 | { |
| 449 | struct resource *bounds; |
| 450 | |
| 451 | if (r->flags & IORESOURCE_IO) |
| 452 | bounds = &hose->io_resource; |
| 453 | else if (r->flags & IORESOURCE_MEM) |
| 454 | bounds = &hose->mem_resources[0]; |
| 455 | else |
| 456 | return 1; |
| 457 | |
| 458 | if (r->start >= bounds->start && r->end <= bounds->end) |
| 459 | return 1; |
| 460 | r->flags = 0; |
| 461 | return 0; |
| 462 | } |
| 463 | |
| 464 | static void __devinit pnv_ioda_update_resources(struct pci_bus *bus) |
| 465 | { |
| 466 | struct pci_controller *hose = pci_bus_to_host(bus); |
| 467 | struct pci_bus *cbus; |
| 468 | struct pci_dev *cdev; |
| 469 | unsigned int i; |
| 470 | u16 cmd; |
| 471 | |
| 472 | /* Clear all device enables */ |
| 473 | list_for_each_entry(cdev, &bus->devices, bus_list) { |
| 474 | pci_read_config_word(cdev, PCI_COMMAND, &cmd); |
| 475 | cmd &= ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER); |
| 476 | pci_write_config_word(cdev, PCI_COMMAND, cmd); |
| 477 | } |
| 478 | |
| 479 | /* Check if bus resources fit in our IO or M32 range */ |
| 480 | for (i = 0; bus->self && (i < 2); i++) { |
| 481 | struct resource *r = bus->resource[i]; |
| 482 | if (r && !pnv_ioda_resource_fit(hose, r)) |
| 483 | pr_err("%s: Bus %d resource %d disabled, no room\n", |
| 484 | pci_name(bus->self), bus->number, i); |
| 485 | } |
| 486 | |
| 487 | /* Update self if it's not a PHB */ |
| 488 | if (bus->self) |
| 489 | pci_setup_bridge(bus); |
| 490 | |
| 491 | /* Update child devices */ |
| 492 | list_for_each_entry(cdev, &bus->devices, bus_list) { |
| 493 | /* Check if resource fits, if not, disabled it */ |
| 494 | for (i = 0; i <= PCI_ROM_RESOURCE; i++) { |
| 495 | struct resource *r = &cdev->resource[i]; |
| 496 | if (!pnv_ioda_resource_fit(hose, r)) |
| 497 | pr_err("%s: Resource %d disabled, no room\n", |
| 498 | pci_name(cdev), i); |
| 499 | } |
| 500 | |
| 501 | /* Assign segments */ |
| 502 | pnv_ioda_setup_pe_segments(cdev); |
| 503 | |
| 504 | /* Update HW BARs */ |
| 505 | for (i = 0; i <= PCI_ROM_RESOURCE; i++) |
| 506 | pci_update_resource(cdev, i); |
| 507 | } |
| 508 | |
| 509 | /* Update child busses */ |
| 510 | list_for_each_entry(cbus, &bus->children, node) |
| 511 | pnv_ioda_update_resources(cbus); |
| 512 | } |
| 513 | |
| 514 | static int __devinit pnv_ioda_alloc_pe(struct pnv_phb *phb) |
| 515 | { |
| 516 | unsigned long pe; |
| 517 | |
| 518 | do { |
| 519 | pe = find_next_zero_bit(phb->ioda.pe_alloc, |
| 520 | phb->ioda.total_pe, 0); |
| 521 | if (pe >= phb->ioda.total_pe) |
| 522 | return IODA_INVALID_PE; |
| 523 | } while(test_and_set_bit(pe, phb->ioda.pe_alloc)); |
| 524 | |
| 525 | phb->ioda.pe_array[pe].pe_number = pe; |
| 526 | return pe; |
| 527 | } |
| 528 | |
| 529 | static void __devinit pnv_ioda_free_pe(struct pnv_phb *phb, int pe) |
| 530 | { |
| 531 | WARN_ON(phb->ioda.pe_array[pe].pdev); |
| 532 | |
| 533 | memset(&phb->ioda.pe_array[pe], 0, sizeof(struct pnv_ioda_pe)); |
| 534 | clear_bit(pe, phb->ioda.pe_alloc); |
| 535 | } |
| 536 | |
| 537 | /* Currently those 2 are only used when MSIs are enabled, this will change |
| 538 | * but in the meantime, we need to protect them to avoid warnings |
| 539 | */ |
| 540 | #ifdef CONFIG_PCI_MSI |
| 541 | static struct pnv_ioda_pe * __devinit __pnv_ioda_get_one_pe(struct pci_dev *dev) |
| 542 | { |
| 543 | struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| 544 | struct pnv_phb *phb = hose->private_data; |
| 545 | struct pci_dn *pdn = pnv_ioda_get_pdn(dev); |
| 546 | |
| 547 | if (!pdn) |
| 548 | return NULL; |
| 549 | if (pdn->pe_number == IODA_INVALID_PE) |
| 550 | return NULL; |
| 551 | return &phb->ioda.pe_array[pdn->pe_number]; |
| 552 | } |
| 553 | |
| 554 | static struct pnv_ioda_pe * __devinit pnv_ioda_get_pe(struct pci_dev *dev) |
| 555 | { |
| 556 | struct pnv_ioda_pe *pe = __pnv_ioda_get_one_pe(dev); |
| 557 | |
| 558 | while (!pe && dev->bus->self) { |
| 559 | dev = dev->bus->self; |
| 560 | pe = __pnv_ioda_get_one_pe(dev); |
| 561 | if (pe) |
| 562 | pe = pe->bus_pe; |
| 563 | } |
| 564 | return pe; |
| 565 | } |
| 566 | #endif /* CONFIG_PCI_MSI */ |
| 567 | |
| 568 | static int __devinit pnv_ioda_configure_pe(struct pnv_phb *phb, |
| 569 | struct pnv_ioda_pe *pe) |
| 570 | { |
| 571 | struct pci_dev *parent; |
| 572 | uint8_t bcomp, dcomp, fcomp; |
| 573 | long rc, rid_end, rid; |
| 574 | |
| 575 | /* Bus validation ? */ |
| 576 | if (pe->pbus) { |
| 577 | int count; |
| 578 | |
| 579 | dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER; |
| 580 | fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER; |
| 581 | parent = pe->pbus->self; |
| 582 | count = pe->pbus->subordinate - pe->pbus->secondary + 1; |
| 583 | switch(count) { |
| 584 | case 1: bcomp = OpalPciBusAll; break; |
| 585 | case 2: bcomp = OpalPciBus7Bits; break; |
| 586 | case 4: bcomp = OpalPciBus6Bits; break; |
| 587 | case 8: bcomp = OpalPciBus5Bits; break; |
| 588 | case 16: bcomp = OpalPciBus4Bits; break; |
| 589 | case 32: bcomp = OpalPciBus3Bits; break; |
| 590 | default: |
| 591 | pr_err("%s: Number of subordinate busses %d" |
| 592 | " unsupported\n", |
| 593 | pci_name(pe->pbus->self), count); |
| 594 | /* Do an exact match only */ |
| 595 | bcomp = OpalPciBusAll; |
| 596 | } |
| 597 | rid_end = pe->rid + (count << 8); |
| 598 | } else { |
| 599 | parent = pe->pdev->bus->self; |
| 600 | bcomp = OpalPciBusAll; |
| 601 | dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER; |
| 602 | fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER; |
| 603 | rid_end = pe->rid + 1; |
| 604 | } |
| 605 | |
| 606 | /* Associate PE in PELT */ |
| 607 | rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid, |
| 608 | bcomp, dcomp, fcomp, OPAL_MAP_PE); |
| 609 | if (rc) { |
| 610 | pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc); |
| 611 | return -ENXIO; |
| 612 | } |
| 613 | opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number, |
| 614 | OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); |
| 615 | |
| 616 | /* Add to all parents PELT-V */ |
| 617 | while (parent) { |
| 618 | struct pci_dn *pdn = pnv_ioda_get_pdn(parent); |
| 619 | if (pdn && pdn->pe_number != IODA_INVALID_PE) { |
| 620 | rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number, |
| 621 | pe->pe_number, 1); |
| 622 | /* XXX What to do in case of error ? */ |
| 623 | } |
| 624 | parent = parent->bus->self; |
| 625 | } |
| 626 | /* Setup reverse map */ |
| 627 | for (rid = pe->rid; rid < rid_end; rid++) |
| 628 | phb->ioda.pe_rmap[rid] = pe->pe_number; |
| 629 | |
| 630 | /* Setup one MVTs on IODA1 */ |
| 631 | if (phb->type == PNV_PHB_IODA1) { |
| 632 | pe->mve_number = pe->pe_number; |
| 633 | rc = opal_pci_set_mve(phb->opal_id, pe->mve_number, |
| 634 | pe->pe_number); |
| 635 | if (rc) { |
| 636 | pe_err(pe, "OPAL error %ld setting up MVE %d\n", |
| 637 | rc, pe->mve_number); |
| 638 | pe->mve_number = -1; |
| 639 | } else { |
| 640 | rc = opal_pci_set_mve_enable(phb->opal_id, |
| 641 | pe->mve_number, 1); |
| 642 | if (rc) { |
| 643 | pe_err(pe, "OPAL error %ld enabling MVE %d\n", |
| 644 | rc, pe->mve_number); |
| 645 | pe->mve_number = -1; |
| 646 | } |
| 647 | } |
| 648 | } else if (phb->type == PNV_PHB_IODA2) |
| 649 | pe->mve_number = 0; |
| 650 | |
| 651 | return 0; |
| 652 | } |
| 653 | |
| 654 | static void __devinit pnv_ioda_link_pe_by_weight(struct pnv_phb *phb, |
| 655 | struct pnv_ioda_pe *pe) |
| 656 | { |
| 657 | struct pnv_ioda_pe *lpe; |
| 658 | |
| 659 | list_for_each_entry(lpe, &phb->ioda.pe_list, link) { |
| 660 | if (lpe->dma_weight < pe->dma_weight) { |
| 661 | list_add_tail(&pe->link, &lpe->link); |
| 662 | return; |
| 663 | } |
| 664 | } |
| 665 | list_add_tail(&pe->link, &phb->ioda.pe_list); |
| 666 | } |
| 667 | |
| 668 | static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev) |
| 669 | { |
| 670 | /* This is quite simplistic. The "base" weight of a device |
| 671 | * is 10. 0 means no DMA is to be accounted for it. |
| 672 | */ |
| 673 | |
| 674 | /* If it's a bridge, no DMA */ |
| 675 | if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL) |
| 676 | return 0; |
| 677 | |
| 678 | /* Reduce the weight of slow USB controllers */ |
| 679 | if (dev->class == PCI_CLASS_SERIAL_USB_UHCI || |
| 680 | dev->class == PCI_CLASS_SERIAL_USB_OHCI || |
| 681 | dev->class == PCI_CLASS_SERIAL_USB_EHCI) |
| 682 | return 3; |
| 683 | |
| 684 | /* Increase the weight of RAID (includes Obsidian) */ |
| 685 | if ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID) |
| 686 | return 15; |
| 687 | |
| 688 | /* Default */ |
| 689 | return 10; |
| 690 | } |
| 691 | |
| 692 | static struct pnv_ioda_pe * __devinit pnv_ioda_setup_dev_PE(struct pci_dev *dev) |
| 693 | { |
| 694 | struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| 695 | struct pnv_phb *phb = hose->private_data; |
| 696 | struct pci_dn *pdn = pnv_ioda_get_pdn(dev); |
| 697 | struct pnv_ioda_pe *pe; |
| 698 | int pe_num; |
| 699 | |
| 700 | if (!pdn) { |
| 701 | pr_err("%s: Device tree node not associated properly\n", |
| 702 | pci_name(dev)); |
| 703 | return NULL; |
| 704 | } |
| 705 | if (pdn->pe_number != IODA_INVALID_PE) |
| 706 | return NULL; |
| 707 | |
| 708 | /* PE#0 has been pre-set */ |
| 709 | if (dev->bus->number == 0) |
| 710 | pe_num = 0; |
| 711 | else |
| 712 | pe_num = pnv_ioda_alloc_pe(phb); |
| 713 | if (pe_num == IODA_INVALID_PE) { |
| 714 | pr_warning("%s: Not enough PE# available, disabling device\n", |
| 715 | pci_name(dev)); |
| 716 | return NULL; |
| 717 | } |
| 718 | |
| 719 | /* NOTE: We get only one ref to the pci_dev for the pdn, not for the |
| 720 | * pointer in the PE data structure, both should be destroyed at the |
| 721 | * same time. However, this needs to be looked at more closely again |
| 722 | * once we actually start removing things (Hotplug, SR-IOV, ...) |
| 723 | * |
| 724 | * At some point we want to remove the PDN completely anyways |
| 725 | */ |
| 726 | pe = &phb->ioda.pe_array[pe_num]; |
| 727 | pci_dev_get(dev); |
| 728 | pdn->pcidev = dev; |
| 729 | pdn->pe_number = pe_num; |
| 730 | pe->pdev = dev; |
| 731 | pe->pbus = NULL; |
| 732 | pe->tce32_seg = -1; |
| 733 | pe->mve_number = -1; |
| 734 | pe->rid = dev->bus->number << 8 | pdn->devfn; |
| 735 | |
| 736 | pe_info(pe, "Associated device to PE\n"); |
| 737 | |
| 738 | if (pnv_ioda_configure_pe(phb, pe)) { |
| 739 | /* XXX What do we do here ? */ |
| 740 | if (pe_num) |
| 741 | pnv_ioda_free_pe(phb, pe_num); |
| 742 | pdn->pe_number = IODA_INVALID_PE; |
| 743 | pe->pdev = NULL; |
| 744 | pci_dev_put(dev); |
| 745 | return NULL; |
| 746 | } |
| 747 | |
| 748 | /* Assign a DMA weight to the device */ |
| 749 | pe->dma_weight = pnv_ioda_dma_weight(dev); |
| 750 | if (pe->dma_weight != 0) { |
| 751 | phb->ioda.dma_weight += pe->dma_weight; |
| 752 | phb->ioda.dma_pe_count++; |
| 753 | } |
| 754 | |
| 755 | /* Link the PE */ |
| 756 | pnv_ioda_link_pe_by_weight(phb, pe); |
| 757 | |
| 758 | return pe; |
| 759 | } |
| 760 | |
| 761 | static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe) |
| 762 | { |
| 763 | struct pci_dev *dev; |
| 764 | |
| 765 | list_for_each_entry(dev, &bus->devices, bus_list) { |
| 766 | struct pci_dn *pdn = pnv_ioda_get_pdn(dev); |
| 767 | |
| 768 | if (pdn == NULL) { |
| 769 | pr_warn("%s: No device node associated with device !\n", |
| 770 | pci_name(dev)); |
| 771 | continue; |
| 772 | } |
| 773 | pci_dev_get(dev); |
| 774 | pdn->pcidev = dev; |
| 775 | pdn->pe_number = pe->pe_number; |
| 776 | pe->dma_weight += pnv_ioda_dma_weight(dev); |
| 777 | if (dev->subordinate) |
| 778 | pnv_ioda_setup_same_PE(dev->subordinate, pe); |
| 779 | } |
| 780 | } |
| 781 | |
| 782 | static void __devinit pnv_ioda_setup_bus_PE(struct pci_dev *dev, |
| 783 | struct pnv_ioda_pe *ppe) |
| 784 | { |
| 785 | struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| 786 | struct pnv_phb *phb = hose->private_data; |
| 787 | struct pci_bus *bus = dev->subordinate; |
| 788 | struct pnv_ioda_pe *pe; |
| 789 | int pe_num; |
| 790 | |
| 791 | if (!bus) { |
| 792 | pr_warning("%s: Bridge without a subordinate bus !\n", |
| 793 | pci_name(dev)); |
| 794 | return; |
| 795 | } |
| 796 | pe_num = pnv_ioda_alloc_pe(phb); |
| 797 | if (pe_num == IODA_INVALID_PE) { |
| 798 | pr_warning("%s: Not enough PE# available, disabling bus\n", |
| 799 | pci_name(dev)); |
| 800 | return; |
| 801 | } |
| 802 | |
| 803 | pe = &phb->ioda.pe_array[pe_num]; |
| 804 | ppe->bus_pe = pe; |
| 805 | pe->pbus = bus; |
| 806 | pe->pdev = NULL; |
| 807 | pe->tce32_seg = -1; |
| 808 | pe->mve_number = -1; |
| 809 | pe->rid = bus->secondary << 8; |
| 810 | pe->dma_weight = 0; |
| 811 | |
| 812 | pe_info(pe, "Secondary busses %d..%d associated with PE\n", |
| 813 | bus->secondary, bus->subordinate); |
| 814 | |
| 815 | if (pnv_ioda_configure_pe(phb, pe)) { |
| 816 | /* XXX What do we do here ? */ |
| 817 | if (pe_num) |
| 818 | pnv_ioda_free_pe(phb, pe_num); |
| 819 | pe->pbus = NULL; |
| 820 | return; |
| 821 | } |
| 822 | |
| 823 | /* Associate it with all child devices */ |
| 824 | pnv_ioda_setup_same_PE(bus, pe); |
| 825 | |
| 826 | /* Account for one DMA PE if at least one DMA capable device exist |
| 827 | * below the bridge |
| 828 | */ |
| 829 | if (pe->dma_weight != 0) { |
| 830 | phb->ioda.dma_weight += pe->dma_weight; |
| 831 | phb->ioda.dma_pe_count++; |
| 832 | } |
| 833 | |
| 834 | /* Link the PE */ |
| 835 | pnv_ioda_link_pe_by_weight(phb, pe); |
| 836 | } |
| 837 | |
| 838 | static void __devinit pnv_ioda_setup_PEs(struct pci_bus *bus) |
| 839 | { |
| 840 | struct pci_dev *dev; |
| 841 | struct pnv_ioda_pe *pe; |
| 842 | |
| 843 | list_for_each_entry(dev, &bus->devices, bus_list) { |
| 844 | pe = pnv_ioda_setup_dev_PE(dev); |
| 845 | if (pe == NULL) |
| 846 | continue; |
| 847 | /* Leaving the PCIe domain ... single PE# */ |
| 848 | if (dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) |
| 849 | pnv_ioda_setup_bus_PE(dev, pe); |
| 850 | else if (dev->subordinate) |
| 851 | pnv_ioda_setup_PEs(dev->subordinate); |
| 852 | } |
| 853 | } |
| 854 | |
| 855 | static void __devinit pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, |
| 856 | struct pci_dev *dev) |
| 857 | { |
| 858 | /* We delay DMA setup after we have assigned all PE# */ |
| 859 | } |
| 860 | |
| 861 | static void __devinit pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, |
| 862 | struct pci_bus *bus) |
| 863 | { |
| 864 | struct pci_dev *dev; |
| 865 | |
| 866 | list_for_each_entry(dev, &bus->devices, bus_list) { |
| 867 | set_iommu_table_base(&dev->dev, &pe->tce32_table); |
| 868 | if (dev->subordinate) |
| 869 | pnv_ioda_setup_bus_dma(pe, dev->subordinate); |
| 870 | } |
| 871 | } |
| 872 | |
| 873 | static void __devinit pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, |
| 874 | struct pnv_ioda_pe *pe, |
| 875 | unsigned int base, |
| 876 | unsigned int segs) |
| 877 | { |
| 878 | |
| 879 | struct page *tce_mem = NULL; |
| 880 | const __be64 *swinvp; |
| 881 | struct iommu_table *tbl; |
| 882 | unsigned int i; |
| 883 | int64_t rc; |
| 884 | void *addr; |
| 885 | |
| 886 | /* 256M DMA window, 4K TCE pages, 8 bytes TCE */ |
| 887 | #define TCE32_TABLE_SIZE ((0x10000000 / 0x1000) * 8) |
| 888 | |
| 889 | /* XXX FIXME: Handle 64-bit only DMA devices */ |
| 890 | /* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */ |
| 891 | /* XXX FIXME: Allocate multi-level tables on PHB3 */ |
| 892 | |
| 893 | /* We shouldn't already have a 32-bit DMA associated */ |
| 894 | if (WARN_ON(pe->tce32_seg >= 0)) |
| 895 | return; |
| 896 | |
| 897 | /* Grab a 32-bit TCE table */ |
| 898 | pe->tce32_seg = base; |
| 899 | pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n", |
| 900 | (base << 28), ((base + segs) << 28) - 1); |
| 901 | |
| 902 | /* XXX Currently, we allocate one big contiguous table for the |
| 903 | * TCEs. We only really need one chunk per 256M of TCE space |
| 904 | * (ie per segment) but that's an optimization for later, it |
| 905 | * requires some added smarts with our get/put_tce implementation |
| 906 | */ |
| 907 | tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL, |
| 908 | get_order(TCE32_TABLE_SIZE * segs)); |
| 909 | if (!tce_mem) { |
| 910 | pe_err(pe, " Failed to allocate a 32-bit TCE memory\n"); |
| 911 | goto fail; |
| 912 | } |
| 913 | addr = page_address(tce_mem); |
| 914 | memset(addr, 0, TCE32_TABLE_SIZE * segs); |
| 915 | |
| 916 | /* Configure HW */ |
| 917 | for (i = 0; i < segs; i++) { |
| 918 | rc = opal_pci_map_pe_dma_window(phb->opal_id, |
| 919 | pe->pe_number, |
| 920 | base + i, 1, |
| 921 | __pa(addr) + TCE32_TABLE_SIZE * i, |
| 922 | TCE32_TABLE_SIZE, 0x1000); |
| 923 | if (rc) { |
| 924 | pe_err(pe, " Failed to configure 32-bit TCE table," |
| 925 | " err %ld\n", rc); |
| 926 | goto fail; |
| 927 | } |
| 928 | } |
| 929 | |
| 930 | /* Setup linux iommu table */ |
| 931 | tbl = &pe->tce32_table; |
| 932 | pnv_pci_setup_iommu_table(tbl, addr, TCE32_TABLE_SIZE * segs, |
| 933 | base << 28); |
| 934 | |
| 935 | /* OPAL variant of P7IOC SW invalidated TCEs */ |
| 936 | swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL); |
| 937 | if (swinvp) { |
| 938 | /* We need a couple more fields -- an address and a data |
| 939 | * to or. Since the bus is only printed out on table free |
| 940 | * errors, and on the first pass the data will be a relative |
| 941 | * bus number, print that out instead. |
| 942 | */ |
| 943 | tbl->it_busno = 0; |
| 944 | tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8); |
| 945 | tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE |
| 946 | | TCE_PCI_SWINV_PAIR; |
| 947 | } |
| 948 | iommu_init_table(tbl, phb->hose->node); |
| 949 | |
| 950 | if (pe->pdev) |
| 951 | set_iommu_table_base(&pe->pdev->dev, tbl); |
| 952 | else |
| 953 | pnv_ioda_setup_bus_dma(pe, pe->pbus); |
| 954 | |
| 955 | return; |
| 956 | fail: |
| 957 | /* XXX Failure: Try to fallback to 64-bit only ? */ |
| 958 | if (pe->tce32_seg >= 0) |
| 959 | pe->tce32_seg = -1; |
| 960 | if (tce_mem) |
| 961 | __free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs)); |
| 962 | } |
| 963 | |
| 964 | static void __devinit pnv_ioda_setup_dma(struct pnv_phb *phb) |
| 965 | { |
| 966 | struct pci_controller *hose = phb->hose; |
| 967 | unsigned int residual, remaining, segs, tw, base; |
| 968 | struct pnv_ioda_pe *pe; |
| 969 | |
| 970 | /* If we have more PE# than segments available, hand out one |
| 971 | * per PE until we run out and let the rest fail. If not, |
| 972 | * then we assign at least one segment per PE, plus more based |
| 973 | * on the amount of devices under that PE |
| 974 | */ |
| 975 | if (phb->ioda.dma_pe_count > phb->ioda.tce32_count) |
| 976 | residual = 0; |
| 977 | else |
| 978 | residual = phb->ioda.tce32_count - |
| 979 | phb->ioda.dma_pe_count; |
| 980 | |
| 981 | pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n", |
| 982 | hose->global_number, phb->ioda.tce32_count); |
| 983 | pr_info("PCI: %d PE# for a total weight of %d\n", |
| 984 | phb->ioda.dma_pe_count, phb->ioda.dma_weight); |
| 985 | |
| 986 | /* Walk our PE list and configure their DMA segments, hand them |
| 987 | * out one base segment plus any residual segments based on |
| 988 | * weight |
| 989 | */ |
| 990 | remaining = phb->ioda.tce32_count; |
| 991 | tw = phb->ioda.dma_weight; |
| 992 | base = 0; |
| 993 | list_for_each_entry(pe, &phb->ioda.pe_list, link) { |
| 994 | if (!pe->dma_weight) |
| 995 | continue; |
| 996 | if (!remaining) { |
| 997 | pe_warn(pe, "No DMA32 resources available\n"); |
| 998 | continue; |
| 999 | } |
| 1000 | segs = 1; |
| 1001 | if (residual) { |
| 1002 | segs += ((pe->dma_weight * residual) + (tw / 2)) / tw; |
| 1003 | if (segs > remaining) |
| 1004 | segs = remaining; |
| 1005 | } |
| 1006 | pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n", |
| 1007 | pe->dma_weight, segs); |
| 1008 | pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs); |
| 1009 | remaining -= segs; |
| 1010 | base += segs; |
| 1011 | } |
| 1012 | } |
| 1013 | |
| 1014 | #ifdef CONFIG_PCI_MSI |
| 1015 | static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev, |
| 1016 | unsigned int hwirq, unsigned int is_64, |
| 1017 | struct msi_msg *msg) |
| 1018 | { |
| 1019 | struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev); |
| 1020 | unsigned int xive_num = hwirq - phb->msi_base; |
| 1021 | uint64_t addr64; |
| 1022 | uint32_t addr32, data; |
| 1023 | int rc; |
| 1024 | |
| 1025 | /* No PE assigned ? bail out ... no MSI for you ! */ |
| 1026 | if (pe == NULL) |
| 1027 | return -ENXIO; |
| 1028 | |
| 1029 | /* Check if we have an MVE */ |
| 1030 | if (pe->mve_number < 0) |
| 1031 | return -ENXIO; |
| 1032 | |
| 1033 | /* Assign XIVE to PE */ |
| 1034 | rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num); |
| 1035 | if (rc) { |
| 1036 | pr_warn("%s: OPAL error %d setting XIVE %d PE\n", |
| 1037 | pci_name(dev), rc, xive_num); |
| 1038 | return -EIO; |
| 1039 | } |
| 1040 | |
| 1041 | if (is_64) { |
| 1042 | rc = opal_get_msi_64(phb->opal_id, pe->mve_number, xive_num, 1, |
| 1043 | &addr64, &data); |
| 1044 | if (rc) { |
| 1045 | pr_warn("%s: OPAL error %d getting 64-bit MSI data\n", |
| 1046 | pci_name(dev), rc); |
| 1047 | return -EIO; |
| 1048 | } |
| 1049 | msg->address_hi = addr64 >> 32; |
| 1050 | msg->address_lo = addr64 & 0xfffffffful; |
| 1051 | } else { |
| 1052 | rc = opal_get_msi_32(phb->opal_id, pe->mve_number, xive_num, 1, |
| 1053 | &addr32, &data); |
| 1054 | if (rc) { |
| 1055 | pr_warn("%s: OPAL error %d getting 32-bit MSI data\n", |
| 1056 | pci_name(dev), rc); |
| 1057 | return -EIO; |
| 1058 | } |
| 1059 | msg->address_hi = 0; |
| 1060 | msg->address_lo = addr32; |
| 1061 | } |
| 1062 | msg->data = data; |
| 1063 | |
| 1064 | pr_devel("%s: %s-bit MSI on hwirq %x (xive #%d)," |
| 1065 | " address=%x_%08x data=%x PE# %d\n", |
| 1066 | pci_name(dev), is_64 ? "64" : "32", hwirq, xive_num, |
| 1067 | msg->address_hi, msg->address_lo, data, pe->pe_number); |
| 1068 | |
| 1069 | return 0; |
| 1070 | } |
| 1071 | |
| 1072 | static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) |
| 1073 | { |
| 1074 | unsigned int bmap_size; |
| 1075 | const __be32 *prop = of_get_property(phb->hose->dn, |
| 1076 | "ibm,opal-msi-ranges", NULL); |
| 1077 | if (!prop) { |
| 1078 | /* BML Fallback */ |
| 1079 | prop = of_get_property(phb->hose->dn, "msi-ranges", NULL); |
| 1080 | } |
| 1081 | if (!prop) |
| 1082 | return; |
| 1083 | |
| 1084 | phb->msi_base = be32_to_cpup(prop); |
| 1085 | phb->msi_count = be32_to_cpup(prop + 1); |
| 1086 | bmap_size = BITS_TO_LONGS(phb->msi_count) * sizeof(unsigned long); |
| 1087 | phb->msi_map = zalloc_maybe_bootmem(bmap_size, GFP_KERNEL); |
| 1088 | if (!phb->msi_map) { |
| 1089 | pr_err("PCI %d: Failed to allocate MSI bitmap !\n", |
| 1090 | phb->hose->global_number); |
| 1091 | return; |
| 1092 | } |
| 1093 | phb->msi_setup = pnv_pci_ioda_msi_setup; |
| 1094 | phb->msi32_support = 1; |
| 1095 | pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n", |
| 1096 | phb->msi_count, phb->msi_base); |
| 1097 | } |
| 1098 | #else |
| 1099 | static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { } |
| 1100 | #endif /* CONFIG_PCI_MSI */ |
| 1101 | |
| 1102 | /* This is the starting point of our IODA specific resource |
| 1103 | * allocation process |
| 1104 | */ |
| 1105 | static void __devinit pnv_pci_ioda_fixup_phb(struct pci_controller *hose) |
| 1106 | { |
| 1107 | resource_size_t size, align; |
| 1108 | struct pci_bus *child; |
| 1109 | |
| 1110 | /* Associate PEs per functions */ |
| 1111 | pnv_ioda_setup_PEs(hose->bus); |
| 1112 | |
| 1113 | /* Calculate all resources */ |
| 1114 | pnv_ioda_calc_bus(hose->bus, IORESOURCE_IO, &size, &align); |
| 1115 | pnv_ioda_calc_bus(hose->bus, IORESOURCE_MEM, &size, &align); |
| 1116 | |
| 1117 | /* Apply then to HW */ |
| 1118 | pnv_ioda_update_resources(hose->bus); |
| 1119 | |
| 1120 | /* Setup DMA */ |
| 1121 | pnv_ioda_setup_dma(hose->private_data); |
| 1122 | |
| 1123 | /* Configure PCI Express settings */ |
| 1124 | list_for_each_entry(child, &hose->bus->children, node) { |
| 1125 | struct pci_dev *self = child->self; |
| 1126 | if (!self) |
| 1127 | continue; |
| 1128 | pcie_bus_configure_settings(child, self->pcie_mpss); |
| 1129 | } |
| 1130 | } |
| 1131 | |
| 1132 | /* Prevent enabling devices for which we couldn't properly |
| 1133 | * assign a PE |
| 1134 | */ |
| 1135 | static int __devinit pnv_pci_enable_device_hook(struct pci_dev *dev) |
| 1136 | { |
| 1137 | struct pci_dn *pdn = pnv_ioda_get_pdn(dev); |
| 1138 | |
| 1139 | if (!pdn || pdn->pe_number == IODA_INVALID_PE) |
| 1140 | return -EINVAL; |
| 1141 | return 0; |
| 1142 | } |
| 1143 | |
| 1144 | static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus, |
| 1145 | u32 devfn) |
| 1146 | { |
| 1147 | return phb->ioda.pe_rmap[(bus->number << 8) | devfn]; |
| 1148 | } |
| 1149 | |
| 1150 | void __init pnv_pci_init_ioda1_phb(struct device_node *np) |
| 1151 | { |
| 1152 | struct pci_controller *hose; |
| 1153 | static int primary = 1; |
| 1154 | struct pnv_phb *phb; |
| 1155 | unsigned long size, m32map_off, iomap_off, pemap_off; |
| 1156 | const u64 *prop64; |
| 1157 | u64 phb_id; |
| 1158 | void *aux; |
| 1159 | long rc; |
| 1160 | |
| 1161 | pr_info(" Initializing IODA OPAL PHB %s\n", np->full_name); |
| 1162 | |
| 1163 | prop64 = of_get_property(np, "ibm,opal-phbid", NULL); |
| 1164 | if (!prop64) { |
| 1165 | pr_err(" Missing \"ibm,opal-phbid\" property !\n"); |
| 1166 | return; |
| 1167 | } |
| 1168 | phb_id = be64_to_cpup(prop64); |
| 1169 | pr_debug(" PHB-ID : 0x%016llx\n", phb_id); |
| 1170 | |
| 1171 | phb = alloc_bootmem(sizeof(struct pnv_phb)); |
| 1172 | if (phb) { |
| 1173 | memset(phb, 0, sizeof(struct pnv_phb)); |
| 1174 | phb->hose = hose = pcibios_alloc_controller(np); |
| 1175 | } |
| 1176 | if (!phb || !phb->hose) { |
| 1177 | pr_err("PCI: Failed to allocate PCI controller for %s\n", |
| 1178 | np->full_name); |
| 1179 | return; |
| 1180 | } |
| 1181 | |
| 1182 | spin_lock_init(&phb->lock); |
| 1183 | /* XXX Use device-tree */ |
| 1184 | hose->first_busno = 0; |
| 1185 | hose->last_busno = 0xff; |
| 1186 | hose->private_data = phb; |
| 1187 | phb->opal_id = phb_id; |
| 1188 | phb->type = PNV_PHB_IODA1; |
| 1189 | |
| 1190 | /* We parse "ranges" now since we need to deduce the register base |
| 1191 | * from the IO base |
| 1192 | */ |
| 1193 | pci_process_bridge_OF_ranges(phb->hose, np, primary); |
| 1194 | primary = 0; |
| 1195 | |
| 1196 | /* Magic formula from Milton */ |
| 1197 | phb->regs = of_iomap(np, 0); |
| 1198 | if (phb->regs == NULL) |
| 1199 | pr_err(" Failed to map registers !\n"); |
| 1200 | |
| 1201 | |
| 1202 | /* XXX This is hack-a-thon. This needs to be changed so that: |
| 1203 | * - we obtain stuff like PE# etc... from device-tree |
| 1204 | * - we properly re-allocate M32 ourselves |
| 1205 | * (the OFW one isn't very good) |
| 1206 | */ |
| 1207 | |
| 1208 | /* Initialize more IODA stuff */ |
| 1209 | phb->ioda.total_pe = 128; |
| 1210 | |
| 1211 | phb->ioda.m32_size = resource_size(&hose->mem_resources[0]); |
| 1212 | /* OFW Has already off top 64k of M32 space (MSI space) */ |
| 1213 | phb->ioda.m32_size += 0x10000; |
| 1214 | |
| 1215 | phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe; |
| 1216 | phb->ioda.m32_pci_base = hose->mem_resources[0].start - |
| 1217 | hose->pci_mem_offset; |
| 1218 | phb->ioda.io_size = hose->pci_io_size; |
| 1219 | phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe; |
| 1220 | phb->ioda.io_pci_base = 0; /* XXX calculate this ? */ |
| 1221 | |
| 1222 | /* Allocate aux data & arrays */ |
| 1223 | size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long)); |
| 1224 | m32map_off = size; |
| 1225 | size += phb->ioda.total_pe; |
| 1226 | iomap_off = size; |
| 1227 | size += phb->ioda.total_pe; |
| 1228 | pemap_off = size; |
| 1229 | size += phb->ioda.total_pe * sizeof(struct pnv_ioda_pe); |
| 1230 | aux = alloc_bootmem(size); |
| 1231 | memset(aux, 0, size); |
| 1232 | phb->ioda.pe_alloc = aux; |
| 1233 | phb->ioda.m32_segmap = aux + m32map_off; |
| 1234 | phb->ioda.io_segmap = aux + iomap_off; |
| 1235 | phb->ioda.pe_array = aux + pemap_off; |
| 1236 | set_bit(0, phb->ioda.pe_alloc); |
| 1237 | |
| 1238 | INIT_LIST_HEAD(&phb->ioda.pe_list); |
| 1239 | |
| 1240 | /* Calculate how many 32-bit TCE segments we have */ |
| 1241 | phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28; |
| 1242 | |
| 1243 | /* Clear unusable m64 */ |
| 1244 | hose->mem_resources[1].flags = 0; |
| 1245 | hose->mem_resources[1].start = 0; |
| 1246 | hose->mem_resources[1].end = 0; |
| 1247 | hose->mem_resources[2].flags = 0; |
| 1248 | hose->mem_resources[2].start = 0; |
| 1249 | hose->mem_resources[2].end = 0; |
| 1250 | |
| 1251 | #if 0 |
| 1252 | rc = opal_pci_set_phb_mem_window(opal->phb_id, |
| 1253 | window_type, |
| 1254 | window_num, |
| 1255 | starting_real_address, |
| 1256 | starting_pci_address, |
| 1257 | segment_size); |
| 1258 | #endif |
| 1259 | |
| 1260 | pr_info(" %d PE's M32: 0x%x [segment=0x%x] IO: 0x%x [segment=0x%x]\n", |
| 1261 | phb->ioda.total_pe, |
| 1262 | phb->ioda.m32_size, phb->ioda.m32_segsize, |
| 1263 | phb->ioda.io_size, phb->ioda.io_segsize); |
| 1264 | |
| 1265 | if (phb->regs) { |
| 1266 | pr_devel(" BUID = 0x%016llx\n", in_be64(phb->regs + 0x100)); |
| 1267 | pr_devel(" PHB2_CR = 0x%016llx\n", in_be64(phb->regs + 0x160)); |
| 1268 | pr_devel(" IO_BAR = 0x%016llx\n", in_be64(phb->regs + 0x170)); |
| 1269 | pr_devel(" IO_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x178)); |
| 1270 | pr_devel(" IO_SAR = 0x%016llx\n", in_be64(phb->regs + 0x180)); |
| 1271 | pr_devel(" M32_BAR = 0x%016llx\n", in_be64(phb->regs + 0x190)); |
| 1272 | pr_devel(" M32_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x198)); |
| 1273 | pr_devel(" M32_SAR = 0x%016llx\n", in_be64(phb->regs + 0x1a0)); |
| 1274 | } |
| 1275 | phb->hose->ops = &pnv_pci_ops; |
| 1276 | |
| 1277 | /* Setup RID -> PE mapping function */ |
| 1278 | phb->bdfn_to_pe = pnv_ioda_bdfn_to_pe; |
| 1279 | |
| 1280 | /* Setup TCEs */ |
| 1281 | phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup; |
| 1282 | |
| 1283 | /* Setup MSI support */ |
| 1284 | pnv_pci_init_ioda_msis(phb); |
| 1285 | |
| 1286 | /* We set both probe_only and PCI_REASSIGN_ALL_RSRC. This is an |
| 1287 | * odd combination which essentially means that we skip all resource |
| 1288 | * fixups and assignments in the generic code, and do it all |
| 1289 | * ourselves here |
| 1290 | */ |
| 1291 | pci_probe_only = 1; |
| 1292 | ppc_md.pcibios_fixup_phb = pnv_pci_ioda_fixup_phb; |
| 1293 | ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook; |
| 1294 | pci_add_flags(PCI_REASSIGN_ALL_RSRC); |
| 1295 | |
| 1296 | /* Reset IODA tables to a clean state */ |
Benjamin Herrenschmidt | f11fe55 | 2011-11-29 18:22:50 +0000 | [diff] [blame^] | 1297 | rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET); |
Benjamin Herrenschmidt | 184cd4a | 2011-11-15 17:29:08 +0000 | [diff] [blame] | 1298 | if (rc) |
Benjamin Herrenschmidt | f11fe55 | 2011-11-29 18:22:50 +0000 | [diff] [blame^] | 1299 | pr_warning(" OPAL Error %ld performing IODA table reset !\n", rc); |
Benjamin Herrenschmidt | 184cd4a | 2011-11-15 17:29:08 +0000 | [diff] [blame] | 1300 | opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE); |
| 1301 | } |
| 1302 | |
| 1303 | void __init pnv_pci_init_ioda_hub(struct device_node *np) |
| 1304 | { |
| 1305 | struct device_node *phbn; |
| 1306 | const u64 *prop64; |
| 1307 | u64 hub_id; |
| 1308 | |
| 1309 | pr_info("Probing IODA IO-Hub %s\n", np->full_name); |
| 1310 | |
| 1311 | prop64 = of_get_property(np, "ibm,opal-hubid", NULL); |
| 1312 | if (!prop64) { |
| 1313 | pr_err(" Missing \"ibm,opal-hubid\" property !\n"); |
| 1314 | return; |
| 1315 | } |
| 1316 | hub_id = be64_to_cpup(prop64); |
| 1317 | pr_devel(" HUB-ID : 0x%016llx\n", hub_id); |
| 1318 | |
| 1319 | /* Count child PHBs */ |
| 1320 | for_each_child_of_node(np, phbn) { |
| 1321 | /* Look for IODA1 PHBs */ |
| 1322 | if (of_device_is_compatible(phbn, "ibm,ioda-phb")) |
| 1323 | pnv_pci_init_ioda1_phb(phbn); |
| 1324 | } |
| 1325 | } |